2019-04-07 02:49:52

by Qian Cai

[permalink] [raw]
Subject: [PATCH] powerpc/pseries/iommu: fix set but not used values

The commit b7d6bf4fdd47 ("powerpc/pseries/pci: Remove obsolete SW
invalidate") left 2 variables unused.

arch/powerpc/platforms/pseries/iommu.c: In function 'tce_build_pSeries':
arch/powerpc/platforms/pseries/iommu.c:108:17: warning: variable 'tces'
set but not used [-Wunused-but-set-variable]
__be64 *tcep, *tces;
^~~~
arch/powerpc/platforms/pseries/iommu.c: In function 'tce_free_pSeries':
arch/powerpc/platforms/pseries/iommu.c:132:17: warning: variable 'tces'
set but not used [-Wunused-but-set-variable]
__be64 *tcep, *tces;
^~~~

Also, the commit 68c0449ea16d ("powerpc/pseries/iommu: Use memory@ nodes
in max RAM address calculation") set "ranges" in
ddw_memory_hotplug_max() but never use it.

arch/powerpc/platforms/pseries/iommu.c: In function
'ddw_memory_hotplug_max':
arch/powerpc/platforms/pseries/iommu.c:948:7: warning: variable 'ranges'
set but not used [-Wunused-but-set-variable]
int ranges, n_mem_addr_cells, n_mem_size_cells, len;
^~~~~~

Signed-off-by: Qian Cai <[email protected]>
---
arch/powerpc/platforms/pseries/iommu.c | 13 +++++--------
1 file changed, 5 insertions(+), 8 deletions(-)

diff --git a/arch/powerpc/platforms/pseries/iommu.c b/arch/powerpc/platforms/pseries/iommu.c
index 36eb1ddbac69..03bbb299320e 100644
--- a/arch/powerpc/platforms/pseries/iommu.c
+++ b/arch/powerpc/platforms/pseries/iommu.c
@@ -105,7 +105,7 @@ static int tce_build_pSeries(struct iommu_table *tbl, long index,
unsigned long attrs)
{
u64 proto_tce;
- __be64 *tcep, *tces;
+ __be64 *tcep;
u64 rpn;

proto_tce = TCE_PCI_READ; // Read allowed
@@ -113,7 +113,7 @@ static int tce_build_pSeries(struct iommu_table *tbl, long index,
if (direction != DMA_TO_DEVICE)
proto_tce |= TCE_PCI_WRITE;

- tces = tcep = ((__be64 *)tbl->it_base) + index;
+ tcep = ((__be64 *)tbl->it_base) + index;

while (npages--) {
/* can't move this out since we might cross MEMBLOCK boundary */
@@ -129,9 +129,9 @@ static int tce_build_pSeries(struct iommu_table *tbl, long index,

static void tce_free_pSeries(struct iommu_table *tbl, long index, long npages)
{
- __be64 *tcep, *tces;
+ __be64 *tcep;

- tces = tcep = ((__be64 *)tbl->it_base) + index;
+ tcep = ((__be64 *)tbl->it_base) + index;

while (npages--)
*(tcep++) = 0;
@@ -945,7 +945,7 @@ static phys_addr_t ddw_memory_hotplug_max(void)

for_each_node_by_type(memory, "memory") {
unsigned long start, size;
- int ranges, n_mem_addr_cells, n_mem_size_cells, len;
+ int n_mem_addr_cells, n_mem_size_cells, len;
const __be32 *memcell_buf;

memcell_buf = of_get_property(memory, "reg", &len);
@@ -955,9 +955,6 @@ static phys_addr_t ddw_memory_hotplug_max(void)
n_mem_addr_cells = of_n_addr_cells(memory);
n_mem_size_cells = of_n_size_cells(memory);

- /* ranges in cell */
- ranges = (len >> 2) / (n_mem_addr_cells + n_mem_size_cells);
-
start = of_read_number(memcell_buf, n_mem_addr_cells);
memcell_buf += n_mem_addr_cells;
size = of_read_number(memcell_buf, n_mem_size_cells);
--
2.17.2 (Apple Git-113)


2019-04-07 06:36:09

by Mukesh Ojha

[permalink] [raw]
Subject: Re: [PATCH] powerpc/pseries/iommu: fix set but not used values


On 4/7/2019 8:18 AM, Qian Cai wrote:
> The commit b7d6bf4fdd47 ("powerpc/pseries/pci: Remove obsolete SW
> invalidate") left 2 variables unused.
>
> arch/powerpc/platforms/pseries/iommu.c: In function 'tce_build_pSeries':
> arch/powerpc/platforms/pseries/iommu.c:108:17: warning: variable 'tces'
> set but not used [-Wunused-but-set-variable]
> __be64 *tcep, *tces;
> ^~~~
> arch/powerpc/platforms/pseries/iommu.c: In function 'tce_free_pSeries':
> arch/powerpc/platforms/pseries/iommu.c:132:17: warning: variable 'tces'
> set but not used [-Wunused-but-set-variable]
> __be64 *tcep, *tces;
> ^~~~
>
> Also, the commit 68c0449ea16d ("powerpc/pseries/iommu: Use memory@ nodes
> in max RAM address calculation") set "ranges" in
> ddw_memory_hotplug_max() but never use it.
>
> arch/powerpc/platforms/pseries/iommu.c: In function
> 'ddw_memory_hotplug_max':
> arch/powerpc/platforms/pseries/iommu.c:948:7: warning: variable 'ranges'
> set but not used [-Wunused-but-set-variable]
> int ranges, n_mem_addr_cells, n_mem_size_cells, len;
> ^~~~~~
>
> Signed-off-by: Qian Cai <[email protected]>
Reviewed-by: Mukesh Ojha <[email protected]>

Cheers,
-Mukesh

> ---
> arch/powerpc/platforms/pseries/iommu.c | 13 +++++--------
> 1 file changed, 5 insertions(+), 8 deletions(-)
>
> diff --git a/arch/powerpc/platforms/pseries/iommu.c b/arch/powerpc/platforms/pseries/iommu.c
> index 36eb1ddbac69..03bbb299320e 100644
> --- a/arch/powerpc/platforms/pseries/iommu.c
> +++ b/arch/powerpc/platforms/pseries/iommu.c
> @@ -105,7 +105,7 @@ static int tce_build_pSeries(struct iommu_table *tbl, long index,
> unsigned long attrs)
> {
> u64 proto_tce;
> - __be64 *tcep, *tces;
> + __be64 *tcep;
> u64 rpn;
>
> proto_tce = TCE_PCI_READ; // Read allowed
> @@ -113,7 +113,7 @@ static int tce_build_pSeries(struct iommu_table *tbl, long index,
> if (direction != DMA_TO_DEVICE)
> proto_tce |= TCE_PCI_WRITE;
>
> - tces = tcep = ((__be64 *)tbl->it_base) + index;
> + tcep = ((__be64 *)tbl->it_base) + index;
>
> while (npages--) {
> /* can't move this out since we might cross MEMBLOCK boundary */
> @@ -129,9 +129,9 @@ static int tce_build_pSeries(struct iommu_table *tbl, long index,
>
> static void tce_free_pSeries(struct iommu_table *tbl, long index, long npages)
> {
> - __be64 *tcep, *tces;
> + __be64 *tcep;
>
> - tces = tcep = ((__be64 *)tbl->it_base) + index;
> + tcep = ((__be64 *)tbl->it_base) + index;
>
> while (npages--)
> *(tcep++) = 0;
> @@ -945,7 +945,7 @@ static phys_addr_t ddw_memory_hotplug_max(void)
>
> for_each_node_by_type(memory, "memory") {
> unsigned long start, size;
> - int ranges, n_mem_addr_cells, n_mem_size_cells, len;
> + int n_mem_addr_cells, n_mem_size_cells, len;
> const __be32 *memcell_buf;
>
> memcell_buf = of_get_property(memory, "reg", &len);
> @@ -955,9 +955,6 @@ static phys_addr_t ddw_memory_hotplug_max(void)
> n_mem_addr_cells = of_n_addr_cells(memory);
> n_mem_size_cells = of_n_size_cells(memory);
>
> - /* ranges in cell */
> - ranges = (len >> 2) / (n_mem_addr_cells + n_mem_size_cells);
> -
> start = of_read_number(memcell_buf, n_mem_addr_cells);
> memcell_buf += n_mem_addr_cells;
> size = of_read_number(memcell_buf, n_mem_size_cells);

2019-04-21 14:22:55

by Michael Ellerman

[permalink] [raw]
Subject: Re: powerpc/pseries/iommu: fix set but not used values

On Sun, 2019-04-07 at 02:48:08 UTC, Qian Cai wrote:
> The commit b7d6bf4fdd47 ("powerpc/pseries/pci: Remove obsolete SW
> invalidate") left 2 variables unused.
>
> arch/powerpc/platforms/pseries/iommu.c: In function 'tce_build_pSeries':
> arch/powerpc/platforms/pseries/iommu.c:108:17: warning: variable 'tces'
> set but not used [-Wunused-but-set-variable]
> __be64 *tcep, *tces;
> ^~~~
> arch/powerpc/platforms/pseries/iommu.c: In function 'tce_free_pSeries':
> arch/powerpc/platforms/pseries/iommu.c:132:17: warning: variable 'tces'
> set but not used [-Wunused-but-set-variable]
> __be64 *tcep, *tces;
> ^~~~
>
> Also, the commit 68c0449ea16d ("powerpc/pseries/iommu: Use memory@ nodes
> in max RAM address calculation") set "ranges" in
> ddw_memory_hotplug_max() but never use it.
>
> arch/powerpc/platforms/pseries/iommu.c: In function
> 'ddw_memory_hotplug_max':
> arch/powerpc/platforms/pseries/iommu.c:948:7: warning: variable 'ranges'
> set but not used [-Wunused-but-set-variable]
> int ranges, n_mem_addr_cells, n_mem_size_cells, len;
> ^~~~~~
>
> Signed-off-by: Qian Cai <[email protected]>
> Reviewed-by: Mukesh Ojha <[email protected]>

Applied to powerpc next, thanks.

https://git.kernel.org/powerpc/c/c05f57fdc34a3d00c9ee28a35772e9d1

cheers