This commit adds pin to pad mapping and output format configuration support
in CX2584x-series chips to cx25840 driver.
This functionality is then used to allow disabling ivtv-specific hacks and
configuration values (called a "generic mode"), so cx25840 driver can be
used for other devices not needing them without risking compatibility
problems.
Signed-off-by: Maciej S. Szmigiero <[email protected]>
---
drivers/media/i2c/cx25840/cx25840-core.c | 414 ++++++++++++++++++++++-
drivers/media/i2c/cx25840/cx25840-core.h | 15 +
drivers/media/i2c/cx25840/cx25840-vbi.c | 4 +
include/media/drv-intf/cx25840.h | 77 ++++-
4 files changed, 500 insertions(+), 10 deletions(-)
diff --git a/drivers/media/i2c/cx25840/cx25840-core.c b/drivers/media/i2c/cx25840/cx25840-core.c
index 8c1111ba051b..f03bd637b795 100644
--- a/drivers/media/i2c/cx25840/cx25840-core.c
+++ b/drivers/media/i2c/cx25840/cx25840-core.c
@@ -21,6 +21,9 @@
* CX23888 DIF support for the HVR1850
* Copyright (C) 2011 Steven Toth <[email protected]>
*
+ * CX2584x pin to pad mapping and output format configuration support are
+ * Copyright (C) 2011 Maciej S. Szmigiero <[email protected]>
+ *
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
@@ -316,6 +319,217 @@ static int cx23885_s_io_pin_config(struct v4l2_subdev *sd, size_t n,
return 0;
}
+static u8 cx25840_function_to_pad(struct i2c_client *client, u8 function)
+{
+ if (function > CX25840_PAD_VRESET) {
+ v4l_err(client, "invalid function %u, assuming default\n",
+ (unsigned int)function);
+ return 0;
+ }
+
+ return function;
+}
+
+static void cx25840_set_invert(u8 *pinctrl3, u8 *voutctrl4, u8 function,
+ u8 pin, bool invert)
+{
+ switch (function) {
+ case CX25840_PAD_IRQ_N:
+ if (invert)
+ *pinctrl3 &= ~2;
+ else
+ *pinctrl3 |= 2;
+ break;
+
+ case CX25840_PAD_ACTIVE:
+ if (invert)
+ *voutctrl4 |= BIT(2);
+ else
+ *voutctrl4 &= ~BIT(2);
+ break;
+
+ case CX25840_PAD_VACTIVE:
+ if (invert)
+ *voutctrl4 |= BIT(5);
+ else
+ *voutctrl4 &= ~BIT(5);
+ break;
+
+ case CX25840_PAD_CBFLAG:
+ if (invert)
+ *voutctrl4 |= BIT(4);
+ else
+ *voutctrl4 &= ~BIT(4);
+ break;
+
+ case CX25840_PAD_VRESET:
+ if (invert)
+ *voutctrl4 |= BIT(0);
+ else
+ *voutctrl4 &= ~BIT(0);
+ break;
+ }
+
+ if (function != CX25840_PAD_DEFAULT)
+ return;
+
+ switch (pin) {
+ case CX25840_PIN_DVALID_PRGM0:
+ if (invert)
+ *voutctrl4 |= BIT(6);
+ else
+ *voutctrl4 &= ~BIT(6);
+ break;
+
+ case CX25840_PIN_HRESET_PRGM2:
+ if (invert)
+ *voutctrl4 |= BIT(1);
+ else
+ *voutctrl4 &= ~BIT(1);
+ break;
+ }
+}
+
+static int cx25840_s_io_pin_config(struct v4l2_subdev *sd, size_t n,
+ struct v4l2_subdev_io_pin_config *p)
+{
+ struct i2c_client *client = v4l2_get_subdevdata(sd);
+ unsigned int i;
+ u8 pinctrl[6], pinconf[10], voutctrl4;
+
+ for (i = 0; i < 6; i++)
+ pinctrl[i] = cx25840_read(client, 0x114 + i);
+
+ for (i = 0; i < 10; i++)
+ pinconf[i] = cx25840_read(client, 0x11c + i);
+
+ voutctrl4 = cx25840_read(client, 0x407);
+
+ for (i = 0; i < n; i++) {
+ u8 strength = p[i].strength;
+
+ if (strength != CX25840_PIN_DRIVE_SLOW &&
+ strength != CX25840_PIN_DRIVE_MEDIUM &&
+ strength != CX25840_PIN_DRIVE_FAST) {
+
+ v4l_err(client,
+ "invalid drive speed for pin %u (%u), assuming fast\n",
+ (unsigned int)p[i].pin,
+ (unsigned int)strength);
+
+ strength = CX25840_PIN_DRIVE_FAST;
+ }
+
+ switch (p[i].pin) {
+ case CX25840_PIN_DVALID_PRGM0:
+ if (p[i].flags & BIT(V4L2_SUBDEV_IO_PIN_DISABLE))
+ pinctrl[0] &= ~BIT(6);
+ else
+ pinctrl[0] |= BIT(6);
+
+ pinconf[3] &= 0xf0;
+ pinconf[3] |= cx25840_function_to_pad(client,
+ p[i].function);
+
+ cx25840_set_invert(&pinctrl[3], &voutctrl4,
+ p[i].function,
+ CX25840_PIN_DVALID_PRGM0,
+ p[i].flags &
+ BIT(V4L2_SUBDEV_IO_PIN_ACTIVE_LOW));
+
+ pinctrl[4] &= ~(3 << 2); /* CX25840_PIN_DRIVE_MEDIUM */
+ switch (strength) {
+ case CX25840_PIN_DRIVE_SLOW:
+ pinctrl[4] |= 1 << 2;
+ break;
+
+ case CX25840_PIN_DRIVE_FAST:
+ pinctrl[4] |= 2 << 2;
+ break;
+ }
+
+ break;
+
+ case CX25840_PIN_HRESET_PRGM2:
+ if (p[i].flags & BIT(V4L2_SUBDEV_IO_PIN_DISABLE))
+ pinctrl[1] &= ~BIT(0);
+ else
+ pinctrl[1] |= BIT(0);
+
+ pinconf[4] &= 0xf0;
+ pinconf[4] |= cx25840_function_to_pad(client,
+ p[i].function);
+
+ cx25840_set_invert(&pinctrl[3], &voutctrl4,
+ p[i].function,
+ CX25840_PIN_HRESET_PRGM2,
+ p[i].flags &
+ BIT(V4L2_SUBDEV_IO_PIN_ACTIVE_LOW));
+
+ pinctrl[4] &= ~(3 << 2); /* CX25840_PIN_DRIVE_MEDIUM */
+ switch (strength) {
+ case CX25840_PIN_DRIVE_SLOW:
+ pinctrl[4] |= 1 << 2;
+ break;
+
+ case CX25840_PIN_DRIVE_FAST:
+ pinctrl[4] |= 2 << 2;
+ break;
+ }
+
+ break;
+
+ case CX25840_PIN_PLL_CLK_PRGM7:
+ if (p[i].flags & BIT(V4L2_SUBDEV_IO_PIN_DISABLE))
+ pinctrl[2] &= ~BIT(2);
+ else
+ pinctrl[2] |= BIT(2);
+
+ switch (p[i].function) {
+ case CX25840_PAD_XTI_X5_DLL:
+ pinconf[6] = 0;
+ break;
+
+ case CX25840_PAD_AUX_PLL:
+ pinconf[6] = 1;
+ break;
+
+ case CX25840_PAD_VID_PLL:
+ pinconf[6] = 5;
+ break;
+
+ case CX25840_PAD_XTI:
+ pinconf[6] = 2;
+ break;
+
+ default:
+ pinconf[6] = 3;
+ pinconf[6] |=
+ cx25840_function_to_pad(client,
+ p[i].function)
+ << 4;
+ }
+
+ break;
+
+ default:
+ v4l_err(client, "invalid or unsupported pin %u\n",
+ (unsigned int)p[i].pin);
+ break;
+ }
+ }
+
+ cx25840_write(client, 0x407, voutctrl4);
+
+ for (i = 0; i < 6; i++)
+ cx25840_write(client, 0x114 + i, pinctrl[i]);
+
+ for (i = 0; i < 10; i++)
+ cx25840_write(client, 0x11c + i, pinconf[i]);
+
+ return 0;
+}
+
static int common_s_io_pin_config(struct v4l2_subdev *sd, size_t n,
struct v4l2_subdev_io_pin_config *pincfg)
{
@@ -323,6 +537,8 @@ static int common_s_io_pin_config(struct v4l2_subdev *sd, size_t n,
if (is_cx2388x(state))
return cx23885_s_io_pin_config(sd, n, pincfg);
+ else if (is_cx2584x(state))
+ return cx25840_s_io_pin_config(sd, n, pincfg);
return 0;
}
@@ -389,6 +605,91 @@ static void cx25840_work_handler(struct work_struct *work)
wake_up(&state->fw_wait);
}
+#define CX25840_VCONFIG_SET_BIT(state, opt_msk, voc, idx, bit, oneval) \
+ do { \
+ if ((state)->vid_config & (opt_msk)) { \
+ if (((state)->vid_config & (opt_msk)) == \
+ (oneval)) \
+ (voc)[idx] |= BIT(bit); \
+ else \
+ (voc)[idx] &= ~BIT(bit); \
+ } \
+ } while (0)
+
+/* apply current vconfig to hardware regs */
+static void cx25840_vconfig_apply(struct i2c_client *client)
+{
+ struct cx25840_state *state = to_state(i2c_get_clientdata(client));
+ u8 voutctrl[3];
+ unsigned int i;
+
+ for (i = 0; i < 3; i++)
+ voutctrl[i] = cx25840_read(client, 0x404 + i);
+
+ if (state->vid_config & CX25840_VCONFIG_FMT_MASK)
+ voutctrl[0] &= ~3;
+ switch (state->vid_config & CX25840_VCONFIG_FMT_MASK) {
+ case CX25840_VCONFIG_FMT_BT656:
+ voutctrl[0] |= 1;
+ break;
+
+ case CX25840_VCONFIG_FMT_VIP11:
+ voutctrl[0] |= 2;
+ break;
+
+ case CX25840_VCONFIG_FMT_VIP2:
+ voutctrl[0] |= 3;
+ break;
+
+ case CX25840_VCONFIG_FMT_BT601:
+ /* zero */
+ default:
+ break;
+ }
+
+ CX25840_VCONFIG_SET_BIT(state, CX25840_VCONFIG_RES_MASK, voutctrl,
+ 0, 2, CX25840_VCONFIG_RES_10BIT);
+ CX25840_VCONFIG_SET_BIT(state, CX25840_VCONFIG_VBIRAW_MASK, voutctrl,
+ 0, 3, CX25840_VCONFIG_VBIRAW_ENABLED);
+ CX25840_VCONFIG_SET_BIT(state, CX25840_VCONFIG_ANCDATA_MASK, voutctrl,
+ 0, 4, CX25840_VCONFIG_ANCDATA_ENABLED);
+ CX25840_VCONFIG_SET_BIT(state, CX25840_VCONFIG_TASKBIT_MASK, voutctrl,
+ 0, 5, CX25840_VCONFIG_TASKBIT_ONE);
+ CX25840_VCONFIG_SET_BIT(state, CX25840_VCONFIG_ACTIVE_MASK, voutctrl,
+ 1, 2, CX25840_VCONFIG_ACTIVE_HORIZONTAL);
+ CX25840_VCONFIG_SET_BIT(state, CX25840_VCONFIG_VALID_MASK, voutctrl,
+ 1, 3, CX25840_VCONFIG_VALID_ANDACTIVE);
+ CX25840_VCONFIG_SET_BIT(state, CX25840_VCONFIG_HRESETW_MASK, voutctrl,
+ 1, 4, CX25840_VCONFIG_HRESETW_PIXCLK);
+
+ if (state->vid_config & CX25840_VCONFIG_CLKGATE_MASK)
+ voutctrl[1] &= ~(3 << 6);
+ switch (state->vid_config & CX25840_VCONFIG_CLKGATE_MASK) {
+ case CX25840_VCONFIG_CLKGATE_VALID:
+ voutctrl[1] |= 2;
+ break;
+
+ case CX25840_VCONFIG_CLKGATE_VALIDACTIVE:
+ voutctrl[1] |= 3;
+ break;
+
+ case CX25840_VCONFIG_CLKGATE_NONE:
+ /* zero */
+ default:
+ break;
+ }
+
+ CX25840_VCONFIG_SET_BIT(state, CX25840_VCONFIG_DCMODE_MASK, voutctrl,
+ 2, 0, CX25840_VCONFIG_DCMODE_BYTES);
+ CX25840_VCONFIG_SET_BIT(state, CX25840_VCONFIG_IDID0S_MASK, voutctrl,
+ 2, 1, CX25840_VCONFIG_IDID0S_LINECNT);
+ CX25840_VCONFIG_SET_BIT(state, CX25840_VCONFIG_VIPCLAMP_MASK, voutctrl,
+ 2, 4, CX25840_VCONFIG_VIPCLAMP_ENABLED);
+
+ for (i = 0; i < 3; i++)
+ cx25840_write(client, 0x404 + i, voutctrl[i]);
+}
+
static void cx25840_initialize(struct i2c_client *client)
{
DEFINE_WAIT(wait);
@@ -455,6 +756,9 @@ static void cx25840_initialize(struct i2c_client *client)
/* (re)set input */
set_input(client, state->vid_input, state->aud_input);
+ if (state->generic_mode)
+ cx25840_vconfig_apply(client);
+
/* start microcontroller */
cx25840_and_or(client, 0x803, ~0x10, 0x10);
}
@@ -809,13 +1113,20 @@ void cx25840_std_setup(struct i2c_client *client)
else
cx25840_write(client, 0x49f, 0x14);
+ /* generic mode uses the values that the chip autoconfig would set */
if (std & V4L2_STD_625_50) {
hblank = 132;
hactive = 720;
burst = 93;
- vblank = 36;
- vactive = 580;
- vblank656 = 40;
+ if (state->generic_mode) {
+ vblank = 34;
+ vactive = 576;
+ vblank656 = 38;
+ } else {
+ vblank = 36;
+ vactive = 580;
+ vblank656 = 40;
+ }
src_decimation = 0x21f;
luma_lpf = 2;
@@ -824,6 +1135,10 @@ void cx25840_std_setup(struct i2c_client *client)
comb = 0;
sc = 0x0a425f;
} else if (std == V4L2_STD_PAL_Nc) {
+ if (state->generic_mode) {
+ burst = 95;
+ luma_lpf = 1;
+ }
uv_lpf = 1;
comb = 0x20;
sc = 556453;
@@ -838,12 +1153,19 @@ void cx25840_std_setup(struct i2c_client *client)
vactive = 487;
luma_lpf = 1;
uv_lpf = 1;
+ if (state->generic_mode) {
+ vblank = 20;
+ vblank656 = 24;
+ }
src_decimation = 0x21f;
if (std == V4L2_STD_PAL_60) {
- vblank = 26;
- vblank656 = 26;
- burst = 0x5b;
+ if (!state->generic_mode) {
+ vblank = 26;
+ vblank656 = 26;
+ burst = 0x5b;
+ } else
+ burst = 0x59;
luma_lpf = 2;
comb = 0x20;
sc = 688739;
@@ -854,8 +1176,10 @@ void cx25840_std_setup(struct i2c_client *client)
comb = 0x20;
sc = 555452;
} else {
- vblank = 26;
- vblank656 = 26;
+ if (!state->generic_mode) {
+ vblank = 26;
+ vblank656 = 26;
+ }
burst = 0x5b;
comb = 0x66;
sc = 556063;
@@ -1403,7 +1727,9 @@ static int cx25840_set_fmt(struct v4l2_subdev *sd,
Hsrc |= (cx25840_read(client, 0x471) & 0xf0) >> 4;
}
- Vlines = fmt->height + (is_50Hz ? 4 : 7);
+ Vlines = fmt->height;
+ if (!state->generic_mode)
+ Vlines += is_50Hz ? 4 : 7;
/*
* We keep 1 margin for the Vsrc < Vlines check since the
@@ -1647,8 +1973,71 @@ static void log_audio_status(struct i2c_client *client)
}
}
+#define CX25840_VCONFIG_OPTION(state, cfg_in, opt_msk) \
+ do { \
+ if ((cfg_in) & (opt_msk)) { \
+ (state)->vid_config &= ~(opt_msk); \
+ (state)->vid_config |= (cfg_in) & (opt_msk); \
+ } \
+ } while (0)
+
+/* apply incoming options to the current vconfig */
+static void cx25840_vconfig_add(struct cx25840_state *state, u32 cfg_in)
+{
+ CX25840_VCONFIG_OPTION(state, cfg_in, CX25840_VCONFIG_FMT_MASK);
+ CX25840_VCONFIG_OPTION(state, cfg_in, CX25840_VCONFIG_RES_MASK);
+ CX25840_VCONFIG_OPTION(state, cfg_in, CX25840_VCONFIG_VBIRAW_MASK);
+ CX25840_VCONFIG_OPTION(state, cfg_in, CX25840_VCONFIG_ANCDATA_MASK);
+ CX25840_VCONFIG_OPTION(state, cfg_in, CX25840_VCONFIG_TASKBIT_MASK);
+ CX25840_VCONFIG_OPTION(state, cfg_in, CX25840_VCONFIG_ACTIVE_MASK);
+ CX25840_VCONFIG_OPTION(state, cfg_in, CX25840_VCONFIG_VALID_MASK);
+ CX25840_VCONFIG_OPTION(state, cfg_in, CX25840_VCONFIG_HRESETW_MASK);
+ CX25840_VCONFIG_OPTION(state, cfg_in, CX25840_VCONFIG_CLKGATE_MASK);
+ CX25840_VCONFIG_OPTION(state, cfg_in, CX25840_VCONFIG_DCMODE_MASK);
+ CX25840_VCONFIG_OPTION(state, cfg_in, CX25840_VCONFIG_IDID0S_MASK);
+ CX25840_VCONFIG_OPTION(state, cfg_in, CX25840_VCONFIG_VIPCLAMP_MASK);
+}
+
/* ----------------------------------------------------------------------- */
+/*
+ * Initializes the device in the generic mode.
+ * For cx2584x chips also adds additional video output settings provided
+ * in @val parameter (CX25840_VCONFIG_*).
+ *
+ * The generic mode disables some of the ivtv-related hacks in this driver.
+ * For cx2584x chips it also enables setting video output configuration while
+ * setting it according to datasheet defaults by default.
+ */
+static int cx25840_init(struct v4l2_subdev *sd, u32 val)
+{
+ struct cx25840_state *state = to_state(sd);
+
+ state->generic_mode = true;
+
+ if (is_cx2584x(state)) {
+ /* set datasheet video output defaults */
+ state->vid_config = CX25840_VCONFIG_FMT_BT656 |
+ CX25840_VCONFIG_RES_8BIT |
+ CX25840_VCONFIG_VBIRAW_DISABLED |
+ CX25840_VCONFIG_ANCDATA_ENABLED |
+ CX25840_VCONFIG_TASKBIT_ONE |
+ CX25840_VCONFIG_ACTIVE_HORIZONTAL |
+ CX25840_VCONFIG_VALID_NORMAL |
+ CX25840_VCONFIG_HRESETW_NORMAL |
+ CX25840_VCONFIG_CLKGATE_NONE |
+ CX25840_VCONFIG_DCMODE_DWORDS |
+ CX25840_VCONFIG_IDID0S_NORMAL |
+ CX25840_VCONFIG_VIPCLAMP_DISABLED;
+
+ /* add additional settings */
+ cx25840_vconfig_add(state, val);
+ } else /* TODO: generic mode needs to be developed for other chips */
+ WARN_ON(1);
+
+ return 0;
+}
+
static int cx25840_reset(struct v4l2_subdev *sd, u32 val)
{
struct cx25840_state *state = to_state(sd);
@@ -1860,6 +2249,11 @@ static int cx25840_s_video_routing(struct v4l2_subdev *sd,
if (is_cx23888(state))
cx23888_std_setup(client);
+ if (is_cx2584x(state) && state->generic_mode && config) {
+ cx25840_vconfig_add(state, config);
+ cx25840_vconfig_apply(client);
+ }
+
return set_input(client, input, state->aud_input);
}
@@ -5067,6 +5461,8 @@ static const struct v4l2_ctrl_ops cx25840_ctrl_ops = {
static const struct v4l2_subdev_core_ops cx25840_core_ops = {
.log_status = cx25840_log_status,
.reset = cx25840_reset,
+ /* calling the (optional) init op will turn on the generic mode */
+ .init = cx25840_init,
.load_fw = cx25840_load_fw,
.s_io_pin_config = common_s_io_pin_config,
#ifdef CONFIG_VIDEO_ADV_DEBUG
diff --git a/drivers/media/i2c/cx25840/cx25840-core.h b/drivers/media/i2c/cx25840/cx25840-core.h
index e3ff1d7ec770..2ff7191ad232 100644
--- a/drivers/media/i2c/cx25840/cx25840-core.h
+++ b/drivers/media/i2c/cx25840/cx25840-core.h
@@ -53,10 +53,15 @@ enum cx25840_media_pads {
* @mute: audio mute V4L2 control (non-cx2583x devices only)
* @pvr150_workaround: whether we enable workaround for Hauppauge PVR150
* hardware bug (audio dropping out)
+ * @generic_mode: whether we disable ivtv-specific hacks
+ * this mode gets turned on when the bridge driver calls
+ * cx25840 subdevice init core op
* @radio: set if we are currently in the radio mode, otherwise
* the current mode is non-radio (that is, video)
* @std: currently set video standard
* @vid_input: currently set video input
+ * @vid_config: currently set video output configuration
+ * only used in the generic mode
* @aud_input: currently set audio input
* @audclk_freq: currently set audio sample rate
* @audmode: currently set audio mode (when in non-radio mode)
@@ -83,9 +88,11 @@ struct cx25840_state {
struct v4l2_ctrl *mute;
};
int pvr150_workaround;
+ bool generic_mode;
int radio;
v4l2_std_id std;
enum cx25840_video_input vid_input;
+ u32 vid_config;
enum cx25840_audio_input aud_input;
u32 audclk_freq;
int audmode;
@@ -118,6 +125,14 @@ static inline bool is_cx2583x(struct cx25840_state *state)
state->id == CX25837;
}
+static inline bool is_cx2584x(struct cx25840_state *state)
+{
+ return state->id == CX25840 ||
+ state->id == CX25841 ||
+ state->id == CX25842 ||
+ state->id == CX25843;
+}
+
static inline bool is_cx231xx(struct cx25840_state *state)
{
return state->id == CX2310X_AV;
diff --git a/drivers/media/i2c/cx25840/cx25840-vbi.c b/drivers/media/i2c/cx25840/cx25840-vbi.c
index 8c99a79fb726..415d482365e0 100644
--- a/drivers/media/i2c/cx25840/cx25840-vbi.c
+++ b/drivers/media/i2c/cx25840/cx25840-vbi.c
@@ -95,6 +95,7 @@ int cx25840_g_sliced_fmt(struct v4l2_subdev *sd, struct v4l2_sliced_vbi_format *
memset(svbi->service_lines, 0, sizeof(svbi->service_lines));
svbi->service_set = 0;
/* we're done if raw VBI is active */
+ /* TODO: this will have to be changed for generic_mode VBI */
if ((cx25840_read(client, 0x404) & 0x10) == 0)
return 0;
@@ -137,6 +138,7 @@ int cx25840_s_raw_fmt(struct v4l2_subdev *sd, struct v4l2_vbi_format *fmt)
cx25840_write(client, 0x54f, vbi_offset);
else
cx25840_write(client, 0x47f, vbi_offset);
+ /* TODO: this will have to be changed for generic_mode VBI */
cx25840_write(client, 0x404, 0x2e);
return 0;
}
@@ -157,6 +159,7 @@ int cx25840_s_sliced_fmt(struct v4l2_subdev *sd, struct v4l2_sliced_vbi_format *
cx25840_std_setup(client);
/* Sliced VBI */
+ /* TODO: this will have to be changed for generic_mode VBI */
cx25840_write(client, 0x404, 0x32); /* Ancillary data */
cx25840_write(client, 0x406, 0x13);
if (is_cx23888(state))
@@ -211,6 +214,7 @@ int cx25840_s_sliced_fmt(struct v4l2_subdev *sd, struct v4l2_sliced_vbi_format *
}
cx25840_write(client, state->vbi_regs_offset + 0x43c, 0x16);
+ /* TODO: this will have to be changed for generic_mode VBI */
if (is_cx23888(state))
cx25840_write(client, 0x428, is_pal ? 0x2a : 0x22);
else
diff --git a/include/media/drv-intf/cx25840.h b/include/media/drv-intf/cx25840.h
index ccbfe72b5d6e..d28ee0ab38ea 100644
--- a/include/media/drv-intf/cx25840.h
+++ b/include/media/drv-intf/cx25840.h
@@ -94,6 +94,81 @@ enum cx25840_video_input {
CX25840_DIF_ON = 0x80000400,
};
+/*
+ * The defines below are used to set the chip video output settings
+ * in the generic mode that can be enabled by calling the subdevice
+ * init core op.
+ *
+ * The requested settings can be passed to the init core op as
+ * @val parameter and to the s_routing video op as @config parameter.
+ *
+ * For details please refer to the section 3.7 Video Output Formatting and
+ * to Video Out Control 1 to 4 registers in the section 5.6 Video Decoder Core
+ * of the chip datasheet.
+ */
+#define CX25840_VCONFIG_FMT_SHIFT 0
+#define CX25840_VCONFIG_FMT_MASK GENMASK(2, 0)
+#define CX25840_VCONFIG_FMT_BT601 BIT(0)
+#define CX25840_VCONFIG_FMT_BT656 BIT(1)
+#define CX25840_VCONFIG_FMT_VIP11 GENMASK(1, 0)
+#define CX25840_VCONFIG_FMT_VIP2 BIT(2)
+
+#define CX25840_VCONFIG_RES_SHIFT 3
+#define CX25840_VCONFIG_RES_MASK GENMASK(4, 3)
+#define CX25840_VCONFIG_RES_8BIT BIT(3)
+#define CX25840_VCONFIG_RES_10BIT BIT(4)
+
+#define CX25840_VCONFIG_VBIRAW_SHIFT 5
+#define CX25840_VCONFIG_VBIRAW_MASK GENMASK(6, 5)
+#define CX25840_VCONFIG_VBIRAW_DISABLED BIT(5)
+#define CX25840_VCONFIG_VBIRAW_ENABLED BIT(6)
+
+#define CX25840_VCONFIG_ANCDATA_SHIFT 7
+#define CX25840_VCONFIG_ANCDATA_MASK GENMASK(8, 7)
+#define CX25840_VCONFIG_ANCDATA_DISABLED BIT(7)
+#define CX25840_VCONFIG_ANCDATA_ENABLED BIT(8)
+
+#define CX25840_VCONFIG_TASKBIT_SHIFT 9
+#define CX25840_VCONFIG_TASKBIT_MASK GENMASK(10, 9)
+#define CX25840_VCONFIG_TASKBIT_ZERO BIT(9)
+#define CX25840_VCONFIG_TASKBIT_ONE BIT(10)
+
+#define CX25840_VCONFIG_ACTIVE_SHIFT 11
+#define CX25840_VCONFIG_ACTIVE_MASK GENMASK(12, 11)
+#define CX25840_VCONFIG_ACTIVE_COMPOSITE BIT(11)
+#define CX25840_VCONFIG_ACTIVE_HORIZONTAL BIT(12)
+
+#define CX25840_VCONFIG_VALID_SHIFT 13
+#define CX25840_VCONFIG_VALID_MASK GENMASK(14, 13)
+#define CX25840_VCONFIG_VALID_NORMAL BIT(13)
+#define CX25840_VCONFIG_VALID_ANDACTIVE BIT(14)
+
+#define CX25840_VCONFIG_HRESETW_SHIFT 15
+#define CX25840_VCONFIG_HRESETW_MASK GENMASK(16, 15)
+#define CX25840_VCONFIG_HRESETW_NORMAL BIT(15)
+#define CX25840_VCONFIG_HRESETW_PIXCLK BIT(16)
+
+#define CX25840_VCONFIG_CLKGATE_SHIFT 17
+#define CX25840_VCONFIG_CLKGATE_MASK GENMASK(18, 17)
+#define CX25840_VCONFIG_CLKGATE_NONE BIT(17)
+#define CX25840_VCONFIG_CLKGATE_VALID BIT(18)
+#define CX25840_VCONFIG_CLKGATE_VALIDACTIVE GENMASK(18, 17)
+
+#define CX25840_VCONFIG_DCMODE_SHIFT 19
+#define CX25840_VCONFIG_DCMODE_MASK GENMASK(20, 19)
+#define CX25840_VCONFIG_DCMODE_DWORDS BIT(19)
+#define CX25840_VCONFIG_DCMODE_BYTES BIT(20)
+
+#define CX25840_VCONFIG_IDID0S_SHIFT 21
+#define CX25840_VCONFIG_IDID0S_MASK GENMASK(22, 21)
+#define CX25840_VCONFIG_IDID0S_NORMAL BIT(21)
+#define CX25840_VCONFIG_IDID0S_LINECNT BIT(22)
+
+#define CX25840_VCONFIG_VIPCLAMP_SHIFT 23
+#define CX25840_VCONFIG_VIPCLAMP_MASK GENMASK(24, 23)
+#define CX25840_VCONFIG_VIPCLAMP_ENABLED BIT(23)
+#define CX25840_VCONFIG_VIPCLAMP_DISABLED BIT(24)
+
enum cx25840_audio_input {
/* Audio inputs: serial or In4-In8 */
CX25840_AUDIO_SERIAL,
@@ -121,7 +196,7 @@ enum cx25840_io_pin {
};
enum cx25840_io_pad {
- /* Output pads */
+ /* Output pads, these must match the actual chip register values */
CX25840_PAD_DEFAULT = 0,
CX25840_PAD_ACTIVE,
CX25840_PAD_VACTIVE,