Some UFS devices have issues if LCC is enabled. So we
are setting PA_LOCAL_TX_LCC_Enable to 0 before link
startup which will make sure that both host and device
TX LCC are disabled once link startup is completed.
Signed-off-by: Anil Varughese <[email protected]>
---
drivers/scsi/ufs/cdns-pltfrm.c | 27 +++++++++++++++++++++++++++
1 file changed, 27 insertions(+)
diff --git a/drivers/scsi/ufs/cdns-pltfrm.c b/drivers/scsi/ufs/cdns-pltfrm.c
index 993519080..b2af04c57 100644
--- a/drivers/scsi/ufs/cdns-pltfrm.c
+++ b/drivers/scsi/ufs/cdns-pltfrm.c
@@ -77,6 +77,31 @@ static int cdns_ufs_hce_enable_notify(struct ufs_hba *hba,
return cdns_ufs_set_hclkdiv(hba);
}
+/**
+ * Called before and after Link startup is carried out.
+ * @hba: host controller instance
+ * @status: notify stage (pre, post change)
+ *
+ * Return zero for success and non-zero for failure
+ */
+static int cdns_ufs_link_startup_notify(struct ufs_hba *hba,
+ enum ufs_notify_change_status status)
+{
+ if (status != PRE_CHANGE)
+ return 0;
+
+ /*
+ * Some UFS devices have issues if LCC is enabled.
+ * So we are setting PA_Local_TX_LCC_Enable to 0
+ * before link startup which will make sure that both host
+ * and device TX LCC are disabled once link startup is
+ * completed.
+ */
+ ufshcd_dme_set(hba, UIC_ARG_MIB(PA_LOCAL_TX_LCC_ENABLE), 0);
+
+ return 0;
+}
+
/**
* cdns_ufs_init - performs additional ufs initialization
* @hba: host controller instance
@@ -114,12 +139,14 @@ static int cdns_ufs_m31_16nm_phy_initialization(struct ufs_hba *hba)
static const struct ufs_hba_variant_ops cdns_ufs_pltfm_hba_vops = {
.name = "cdns-ufs-pltfm",
.hce_enable_notify = cdns_ufs_hce_enable_notify,
+ .link_startup_notify = cdns_ufs_link_startup_notify,
};
static const struct ufs_hba_variant_ops cdns_ufs_m31_16nm_pltfm_hba_vops = {
.name = "cdns-ufs-pltfm",
.init = cdns_ufs_init,
.hce_enable_notify = cdns_ufs_hce_enable_notify,
+ .link_startup_notify = cdns_ufs_link_startup_notify,
.phy_initialization = cdns_ufs_m31_16nm_phy_initialization,
};
--
2.15.0
Hi,
On 13/08/19 1:12 PM, Anil Varughese wrote:
> Some UFS devices have issues if LCC is enabled. So we
> are setting PA_LOCAL_TX_LCC_Enable to 0 before link
> startup which will make sure that both host and device
> TX LCC are disabled once link startup is completed.
>
> Signed-off-by: Anil Varughese <[email protected]>> ---
Reviewed-by: Vignesh Raghavendra <[email protected]>
Regards
Vignesh
> drivers/scsi/ufs/cdns-pltfrm.c | 27 +++++++++++++++++++++++++++
> 1 file changed, 27 insertions(+)
>
> diff --git a/drivers/scsi/ufs/cdns-pltfrm.c b/drivers/scsi/ufs/cdns-pltfrm.c
> index 993519080..b2af04c57 100644
> --- a/drivers/scsi/ufs/cdns-pltfrm.c
> +++ b/drivers/scsi/ufs/cdns-pltfrm.c
> @@ -77,6 +77,31 @@ static int cdns_ufs_hce_enable_notify(struct ufs_hba *hba,
> return cdns_ufs_set_hclkdiv(hba);
> }
>
> +/**
> + * Called before and after Link startup is carried out.
> + * @hba: host controller instance
> + * @status: notify stage (pre, post change)
> + *
> + * Return zero for success and non-zero for failure
> + */
> +static int cdns_ufs_link_startup_notify(struct ufs_hba *hba,
> + enum ufs_notify_change_status status)
> +{
> + if (status != PRE_CHANGE)
> + return 0;
> +
> + /*
> + * Some UFS devices have issues if LCC is enabled.
> + * So we are setting PA_Local_TX_LCC_Enable to 0
> + * before link startup which will make sure that both host
> + * and device TX LCC are disabled once link startup is
> + * completed.
> + */
> + ufshcd_dme_set(hba, UIC_ARG_MIB(PA_LOCAL_TX_LCC_ENABLE), 0);
> +
> + return 0;
> +}
> +
> /**
> * cdns_ufs_init - performs additional ufs initialization
> * @hba: host controller instance
> @@ -114,12 +139,14 @@ static int cdns_ufs_m31_16nm_phy_initialization(struct ufs_hba *hba)
> static const struct ufs_hba_variant_ops cdns_ufs_pltfm_hba_vops = {
> .name = "cdns-ufs-pltfm",
> .hce_enable_notify = cdns_ufs_hce_enable_notify,
> + .link_startup_notify = cdns_ufs_link_startup_notify,
> };
>
> static const struct ufs_hba_variant_ops cdns_ufs_m31_16nm_pltfm_hba_vops = {
> .name = "cdns-ufs-pltfm",
> .init = cdns_ufs_init,
> .hce_enable_notify = cdns_ufs_hce_enable_notify,
> + .link_startup_notify = cdns_ufs_link_startup_notify,
> .phy_initialization = cdns_ufs_m31_16nm_phy_initialization,
> };
>
>
--
Regards
Vignesh
Anil,
> Some UFS devices have issues if LCC is enabled. So we are setting
> PA_LOCAL_TX_LCC_Enable to 0 before link startup which will make sure
> that both host and device TX LCC are disabled once link startup is
> completed.
Applied to 5.4/scsi-queue. Thanks!
--
Martin K. Petersen Oracle Linux Engineering