When in AVB mode we need to disable flow control to prevent MAC from
pausing in TX side.
Fixes: ec6ea8e3eee9 ("net: stmmac: Add CBS support in XGMAC2")
Signed-off-by: Jose Abreu <[email protected]>
---
Cc: Giuseppe Cavallaro <[email protected]>
Cc: Alexandre Torgue <[email protected]>
Cc: Jose Abreu <[email protected]>
Cc: "David S. Miller" <[email protected]>
Cc: Maxime Coquelin <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
---
drivers/net/ethernet/stmicro/stmmac/dwxgmac2_dma.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwxgmac2_dma.c b/drivers/net/ethernet/stmicro/stmmac/dwxgmac2_dma.c
index 7bd1447f9f47..f148cb2061d8 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwxgmac2_dma.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwxgmac2_dma.c
@@ -473,6 +473,7 @@ static void dwxgmac2_enable_tso(void __iomem *ioaddr, bool en, u32 chan)
static void dwxgmac2_qmode(void __iomem *ioaddr, u32 channel, u8 qmode)
{
u32 value = readl(ioaddr + XGMAC_MTL_TXQ_OPMODE(channel));
+ u32 flow = readl(ioaddr + XGMAC_RX_FLOW_CTRL);
value &= ~XGMAC_TXQEN;
if (qmode != MTL_QUEUE_AVB) {
@@ -480,6 +481,7 @@ static void dwxgmac2_qmode(void __iomem *ioaddr, u32 channel, u8 qmode)
writel(0, ioaddr + XGMAC_MTL_TCx_ETS_CONTROL(channel));
} else {
value |= 0x1 << XGMAC_TXQEN_SHIFT;
+ writel(flow & (~XGMAC_RFE), ioaddr + XGMAC_RX_FLOW_CTRL);
}
writel(value, ioaddr + XGMAC_MTL_TXQ_OPMODE(channel));
--
2.7.4