Hi there,
first try at a patch which was an actual pain with my Lenovo T500
notebook, augmented with an USB3 PCMCIA card that has an ASM1042 chip.
Inspired by this email thread:
https://markmail.org/thread/7vzqbe7t6du6qsw3
ASM1042 identifies as a 0x96 XHCI host, brings spurious transfer event
errors with a r8152 (Realtek 8153a) USB3 enthernet adapter. Additionally
setting quirk XHCI_SPURIOUS_SUCCESS seems to resolve this issue in this
case.
wiith best regards
Jens Glathe
On Tue, Aug 30, 2022 at 04:27:42PM +0000, Jens Glathe wrote:
> Hi there,
>
> first try at a patch which was an actual pain with my Lenovo T500 notebook,
> augmented with an USB3 PCMCIA card that has an ASM1042 chip. Inspired by
> this email thread: https://markmail.org/thread/7vzqbe7t6du6qsw3
>
> ASM1042 identifies as a 0x96 XHCI host, brings spurious transfer event
> errors with a r8152 (Realtek 8153a) USB3 enthernet adapter. Additionally
> setting quirk XHCI_SPURIOUS_SUCCESS seems to resolve this issue in this
> case.
>
> wiith best regards
>
> Jens Glathe
> From eac3410eeaf03c111add4dce247c4002fc58ba5d Mon Sep 17 00:00:00 2001
> From: Jens Glathe <[email protected]>
> Date: Sun, 28 Aug 2022 16:23:41 +0200
> Subject: [PATCH] fix: add XHCI_SPURIOUS_SUCCESS to ASM1042 despite being a
> V0.96 controller
>
> only if it reports as a V0.96 XHCI controller. Appears to fix the errors
> "xhci_hcd <address>; ERROR Transfer event TRB DMA ptr not part of current TD ep_index 2 comp_code 13"
> that appear spuriously (or pretty often) when using a r8152 USB3 ethernet adapter with integrated hub.
> ---
> drivers/usb/host/xhci-pci.c | 8 +++++++-
> 1 file changed, 7 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c
> index dce6c0ec8d34..035229bc6d29 100644
> --- a/drivers/usb/host/xhci-pci.c
> +++ b/drivers/usb/host/xhci-pci.c
> @@ -306,8 +306,14 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci)
> }
>
> if (pdev->vendor == PCI_VENDOR_ID_ASMEDIA &&
> - pdev->device == PCI_DEVICE_ID_ASMEDIA_1042_XHCI)
> + pdev->device == PCI_DEVICE_ID_ASMEDIA_1042_XHCI) {
> + /* try to tame the ASMedia 1042 controller which is 0.96
> + */
> + if (xhci->hci_version == 0x96) {
> + xhci->quirks |= XHCI_SPURIOUS_SUCCESS;
> + }
> xhci->quirks |= XHCI_BROKEN_STREAMS;
> + }
> if (pdev->vendor == PCI_VENDOR_ID_ASMEDIA &&
> pdev->device == PCI_DEVICE_ID_ASMEDIA_1042A_XHCI) {
> xhci->quirks |= XHCI_TRUST_TX_LENGTH;
> --
> 2.25.1
>
Hi,
This is the friendly patch-bot of Greg Kroah-Hartman. You have sent him
a patch that has triggered this response. He used to manually respond
to these common problems, but in order to save his sanity (he kept
writing the same thing over and over, yet to different people), I was
created. Hopefully you will not take offence and will fix the problem
in your patch and resubmit it so that it can be accepted into the Linux
kernel tree.
You are receiving this message because of the following common error(s)
as indicated below:
- Your patch contains warnings and/or errors noticed by the
scripts/checkpatch.pl tool.
- Your patch was attached, please place it inline so that it can be
applied directly from the email message itself.
- Your patch does not have a Signed-off-by: line. Please read the
kernel file, Documentation/SubmittingPatches and resend it after
adding that line. Note, the line needs to be in the body of the
email, before the patch, not at the bottom of the patch or in the
email signature.
- You did not specify a description of why the patch is needed, or
possibly, any description at all, in the email body. Please read the
section entitled "The canonical patch format" in the kernel file,
Documentation/SubmittingPatches for what is needed in order to
properly describe the change.
- You did not write a descriptive Subject: for the patch, allowing Greg,
and everyone else, to know what this patch is all about. Please read
the section entitled "The canonical patch format" in the kernel file,
Documentation/SubmittingPatches for what a proper Subject: line should
look like.
If you wish to discuss this problem further, or you have questions about
how to resolve this issue, please feel free to respond to this email and
Greg will reply once he has dug out from the pending patches received
from other developers.
thanks,
greg k-h's patch email bot
On Tue, Aug 30, 2022 at 06:00:35PM +0200, Jens Glathe wrote:
> only if it reports as a V0.96 XHCI controller. Appears to fix the errors
> "xhci_hcd <address>; ERROR Transfer event TRB DMA ptr not part of current TD ep_index 2 comp_code 13"
> that appear spuriously (or pretty often) when using a r8152 USB3 ethernet adapter with integrated hub.
> ---
> drivers/usb/host/xhci-pci.c | 8 +++++++-
> 1 file changed, 7 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c
> index dce6c0ec8d34..035229bc6d29 100644
> --- a/drivers/usb/host/xhci-pci.c
> +++ b/drivers/usb/host/xhci-pci.c
> @@ -306,8 +306,14 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci)
> }
>
> if (pdev->vendor == PCI_VENDOR_ID_ASMEDIA &&
> - pdev->device == PCI_DEVICE_ID_ASMEDIA_1042_XHCI)
> + pdev->device == PCI_DEVICE_ID_ASMEDIA_1042_XHCI) {
> + /* try to tame the ASMedia 1042 controller which is 0.96
> + */
> + if (xhci->hci_version == 0x96) {
> + xhci->quirks |= XHCI_SPURIOUS_SUCCESS;
> + }
> xhci->quirks |= XHCI_BROKEN_STREAMS;
> + }
> if (pdev->vendor == PCI_VENDOR_ID_ASMEDIA &&
> pdev->device == PCI_DEVICE_ID_ASMEDIA_1042A_XHCI) {
> xhci->quirks |= XHCI_TRUST_TX_LENGTH;
> --
> 2.25.1
>
Hi,
This is the friendly patch-bot of Greg Kroah-Hartman. You have sent him
a patch that has triggered this response. He used to manually respond
to these common problems, but in order to save his sanity (he kept
writing the same thing over and over, yet to different people), I was
created. Hopefully you will not take offence and will fix the problem
in your patch and resubmit it so that it can be accepted into the Linux
kernel tree.
You are receiving this message because of the following common error(s)
as indicated below:
- Your patch contains warnings and/or errors noticed by the
scripts/checkpatch.pl tool.
- Your patch does not have a Signed-off-by: line. Please read the
kernel file, Documentation/SubmittingPatches and resend it after
adding that line. Note, the line needs to be in the body of the
email, before the patch, not at the bottom of the patch or in the
email signature.
If you wish to discuss this problem further, or you have questions about
how to resolve this issue, please feel free to respond to this email and
Greg will reply once he has dug out from the pending patches received
from other developers.
thanks,
greg k-h's patch email bot