From: S Twiss <[email protected]>
This patch set adds OnKey driver support for the Dialog
Semiconductor DA9063 PMIC.
[PATCH V2 1/2]: kernel driver onkey support
[PATCH V2 2/2]: device tree bindings document
Thank you,
Steve Twiss, Dialog Semiconductor Ltd.
S Twiss (2):
input: misc: da9063: OnKey driver
devicetree: Add bindings for DA9063 OnKey
Documentation/devicetree/bindings/mfd/da9063.txt | 22 ++-
MAINTAINERS | 2 +-
drivers/input/misc/Kconfig | 10 +
drivers/input/misc/Makefile | 1 +
drivers/input/misc/da9063-onkey.c | 228 +++++++++++++++++++++++
drivers/mfd/da9063-core.c | 55 ++++++
include/linux/mfd/da9063/pdata.h | 1 +
7 files changed, 316 insertions(+), 3 deletions(-)
create mode 100644 drivers/input/misc/da9063-onkey.c
--
end-of-patch for PATCH V2
From: Steve Twiss <[email protected]>
Add device tree bindings for the DA9063 OnKey driver
Signed-off-by: Steve Twiss <[email protected]>
---
Changes from PATCH V1 to V2
---------------------------
- Remove the circular dependency comment linking patches in the main e-mail
- Search and replace 'keyword' with 'property' in onkey sub-node description
- Reformat onkey sub-node content to move the description for disable-key-power
into a new optional properties sub-section so it has a more promiment
position
This patch applies against linux-next and v4.0-rc6
Documentation/devicetree/bindings/mfd/da9063.txt | 22 ++++++++++++++++++++--
1 file changed, 20 insertions(+), 2 deletions(-)
diff --git a/Documentation/devicetree/bindings/mfd/da9063.txt b/Documentation/devicetree/bindings/mfd/da9063.txt
index 42c6fa6..c671784 100644
--- a/Documentation/devicetree/bindings/mfd/da9063.txt
+++ b/Documentation/devicetree/bindings/mfd/da9063.txt
@@ -2,9 +2,10 @@
DA9093 consists of a large and varied group of sub-devices (I2C Only):
-Device Supply Names Description
------- ------------ -----------
+Device Supply Names Description
+------ ------------ -----------
da9063-regulator : : LDOs & BUCKs
+da9063-onkey : : On Key
da9063-rtc : : Real-Time Clock
da9063-watchdog : : Watchdog
@@ -51,6 +52,18 @@ Sub-nodes:
the DA9063. There are currently no entries in this binding, however
compatible = "dlg,da9063-rtc" should be added if a node is created.
+- onkey : This node defines the OnKey settings for controlling the key
+ functionality of the device. The node should contain the compatible property
+ with the value "dlg,da9063-onkey".
+
+ Optional onkey properties:
+
+ - dlg,disable-key-power : Disable power-down using a long key-press. If this
+ entry exists the OnKey driver will remove support for the KEY_POWER key
+ press. If this entry does not exist then by default the key-press
+ triggered power down is enabled and the OnKey will support both KEY_POWER
+ and KEY_SLEEP.
+
- watchdog : This node defines settings for the Watchdog timer associated
with the DA9063. There are currently no entries in this binding, however
compatible = "dlg,da9063-watchdog" should be added if a node is created.
@@ -73,6 +86,11 @@ Example:
compatible = "dlg,da9063-watchdog";
};
+ onkey {
+ compatible = "dlg,da9063-onkey";
+ dlg,disable-key-power;
+ };
+
regulators {
DA9063_BCORE1: bcore1 {
regulator-name = "BCORE1";
--
end-of-patch for PATCH V2
From: Steve Twiss <[email protected]>
Add OnKey driver support for DA9063
Signed-off-by: Steve Twiss <[email protected]>
---
Changes from PATCH V1 to V2
---------------------------
- Remove the circular dependency comment in the main e-mail body
linking PATCH V1 1/2 and 2/2
- Alter the copyright header information to match expected GPLv2
text from http://www.gnu.org/licenses/gpl-2.0.html
This patch applies against linux-next and v4.0-rc6
MAINTAINERS | 2 +-
drivers/input/misc/Kconfig | 10 ++
drivers/input/misc/Makefile | 1 +
drivers/input/misc/da9063-onkey.c | 228 ++++++++++++++++++++++++++++++++++++++
drivers/mfd/da9063-core.c | 55 +++++++++
include/linux/mfd/da9063/pdata.h | 1 +
6 files changed, 296 insertions(+), 1 deletion(-)
create mode 100644 drivers/input/misc/da9063-onkey.c
diff --git a/MAINTAINERS b/MAINTAINERS
index 1de6afa..97e20cf 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -3138,7 +3138,7 @@ S: Supported
F: Documentation/hwmon/da90??
F: drivers/gpio/gpio-da90??.c
F: drivers/hwmon/da90??-hwmon.c
-F: drivers/input/misc/da90??_onkey.c
+F: drivers/input/misc/da90???onkey.c
F: drivers/input/touchscreen/da9052_tsi.c
F: drivers/leds/leds-da90??.c
F: drivers/mfd/da903x.c
diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig
index 6deb8da..9d7a79d 100644
--- a/drivers/input/misc/Kconfig
+++ b/drivers/input/misc/Kconfig
@@ -586,6 +586,16 @@ config INPUT_DA9055_ONKEY
To compile this driver as a module, choose M here: the module
will be called da9055_onkey.
+config INPUT_DA9063_ONKEY
+ tristate "Dialog DA9063 OnKey"
+ depends on MFD_DA9063
+ help
+ Support the ONKEY of Dialog DA9063 Power Management IC as an
+ input device reporting power button statue.
+
+ To compile this driver as a module, choose M here: the module
+ will be called da9063-onkey.
+
config INPUT_DM355EVM
tristate "TI DaVinci DM355 EVM Keypad and IR Remote"
depends on MFD_DM355EVM_MSP
diff --git a/drivers/input/misc/Makefile b/drivers/input/misc/Makefile
index 403a1a5..50ae57e 100644
--- a/drivers/input/misc/Makefile
+++ b/drivers/input/misc/Makefile
@@ -25,6 +25,7 @@ obj-$(CONFIG_INPUT_CMA3000_I2C) += cma3000_d0x_i2c.o
obj-$(CONFIG_INPUT_COBALT_BTNS) += cobalt_btns.o
obj-$(CONFIG_INPUT_DA9052_ONKEY) += da9052_onkey.o
obj-$(CONFIG_INPUT_DA9055_ONKEY) += da9055_onkey.o
+obj-$(CONFIG_INPUT_DA9063_ONKEY) += da9063-onkey.o
obj-$(CONFIG_INPUT_DM355EVM) += dm355evm_keys.o
obj-$(CONFIG_INPUT_E3X0_BUTTON) += e3x0-button.o
obj-$(CONFIG_INPUT_DRV260X_HAPTICS) += drv260x.o
diff --git a/drivers/input/misc/da9063-onkey.c b/drivers/input/misc/da9063-onkey.c
new file mode 100644
index 0000000..9e41a2d
--- /dev/null
+++ b/drivers/input/misc/da9063-onkey.c
@@ -0,0 +1,228 @@
+/*
+ * da9063-onkey.c - Onkey device driver for DA9063
+ * Copyright (C) 2015 Dialog Semiconductor Ltd.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/module.h>
+#include <linux/errno.h>
+#include <linux/input.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/workqueue.h>
+#include <linux/regmap.h>
+#include <linux/of.h>
+#include <linux/mfd/da9063/core.h>
+#include <linux/mfd/da9063/pdata.h>
+#include <linux/mfd/da9063/registers.h>
+
+struct da9063_onkey {
+ struct da9063 *hw;
+ struct delayed_work work;
+ struct input_dev *input;
+ int irq;
+ bool key_power;
+};
+
+static void da9063_poll_on(struct work_struct *work)
+{
+ struct da9063_onkey *onkey = container_of(work, struct da9063_onkey,
+ work.work);
+ unsigned int val;
+ int fault_log = 0;
+ bool poll = true;
+ int ret;
+
+ /* poll to see when the pin is released */
+ ret = regmap_read(onkey->hw->regmap, DA9063_REG_STATUS_A, &val);
+ if (ret < 0) {
+ dev_err(&onkey->input->dev,
+ "Failed to read ON status: %d\n", ret);
+ goto err_poll;
+ }
+
+ if (!(val & DA9063_NONKEY)) {
+ ret = regmap_update_bits(onkey->hw->regmap,
+ DA9063_REG_CONTROL_B,
+ DA9063_NONKEY_LOCK, 0);
+ if (ret < 0) {
+ dev_err(&onkey->input->dev,
+ "Failed to reset the Key Delay %d\n", ret);
+ goto err_poll;
+ }
+
+ input_report_key(onkey->input, KEY_POWER, 0);
+ input_sync(onkey->input);
+
+ poll = false;
+ }
+
+ /* if the fault log KEY_RESET is detected,
+ * then clear it and shutdown via I2C
+ */
+ ret = regmap_read(onkey->hw->regmap, DA9063_REG_FAULT_LOG, &fault_log);
+ if (ret < 0)
+ dev_warn(&onkey->input->dev, "Cannot read FAULT_LOG\n");
+
+ if (fault_log & DA9063_KEY_RESET) {
+ ret = regmap_write(onkey->hw->regmap,
+ DA9063_REG_FAULT_LOG,
+ DA9063_KEY_RESET);
+ if (ret < 0)
+ dev_warn(&onkey->input->dev,
+ "Cannot reset KEY_RESET fault log\n");
+ else {
+ /* at this point we do any S/W housekeeping
+ * and then send shutdown command
+ */
+ dev_info(&onkey->input->dev,
+ "Sending SHUTDOWN to DA9063 ...\n");
+ ret = regmap_write(onkey->hw->regmap,
+ DA9063_REG_CONTROL_F,
+ DA9063_SHUTDOWN);
+ if (ret < 0)
+ dev_err(&onkey->input->dev,
+ "Cannot SHUTDOWN DA9063\n");
+ }
+ }
+
+err_poll:
+ if (poll)
+ schedule_delayed_work(&onkey->work, 50);
+}
+
+static irqreturn_t da9063_onkey_irq_handler(int irq, void *data)
+{
+ struct da9063_onkey *onkey = data;
+ unsigned int val;
+ int ret;
+
+ ret = regmap_read(onkey->hw->regmap, DA9063_REG_STATUS_A, &val);
+ if (onkey->key_power && (ret >= 0) && (val & DA9063_NONKEY)) {
+ input_report_key(onkey->input, KEY_POWER, 1);
+ input_sync(onkey->input);
+ schedule_delayed_work(&onkey->work, 0);
+ dev_notice(&onkey->input->dev, "KEY_POWER pressed.\n");
+ } else {
+ input_report_key(onkey->input, KEY_SLEEP, 1);
+ input_sync(onkey->input);
+ input_report_key(onkey->input, KEY_SLEEP, 0);
+ input_sync(onkey->input);
+ dev_notice(&onkey->input->dev, "KEY_SLEEP pressed.\n");
+ }
+
+ return IRQ_HANDLED;
+}
+
+static int da9063_onkey_probe(struct platform_device *pdev)
+{
+ struct da9063 *da9063 = dev_get_drvdata(pdev->dev.parent);
+ struct da9063_pdata *pdata = dev_get_platdata(da9063->dev);
+ struct da9063_onkey *onkey;
+ bool kp_tmp = true;
+ int ret = 0;
+
+ if (pdata)
+ kp_tmp = pdata->key_power;
+ else {
+ kp_tmp = of_property_read_bool((&pdev->dev)->of_node,
+ "dlg,disable-key-power");
+ kp_tmp = !kp_tmp;
+ }
+
+ onkey = devm_kzalloc(&pdev->dev, sizeof(struct da9063_onkey),
+ GFP_KERNEL);
+ if (!onkey) {
+ dev_err(&pdev->dev, "Failed to allocate memory.\n");
+ ret = -ENOMEM;
+ goto err;
+ }
+
+ INIT_DELAYED_WORK(&onkey->work, da9063_poll_on);
+
+ onkey->input = devm_input_allocate_device(&pdev->dev);
+ if (!onkey->input) {
+ dev_err(&pdev->dev, "Failed to allocated input device.\n");
+ ret = -ENOMEM;
+ goto err;
+ }
+
+ ret = platform_get_irq_byname(pdev, "ONKEY");
+ if (ret < 0) {
+ dev_err(&pdev->dev, "Failed to get platform IRQ.\n");
+ goto err;
+ }
+ onkey->irq = ret;
+
+ ret = request_threaded_irq(onkey->irq, NULL,
+ da9063_onkey_irq_handler,
+ IRQF_TRIGGER_LOW | IRQF_ONESHOT,
+ "ONKEY", onkey);
+ if (ret) {
+ dev_err(&pdev->dev,
+ "Failed to request input device IRQ.\n");
+ goto err;
+ }
+
+ onkey->hw = da9063;
+ onkey->key_power = kp_tmp;
+ onkey->input->evbit[0] = BIT_MASK(EV_KEY);
+ onkey->input->name = DA9063_DRVNAME_ONKEY;
+ onkey->input->phys = DA9063_DRVNAME_ONKEY "/input0";
+ onkey->input->dev.parent = &pdev->dev;
+
+ if (onkey->key_power)
+ input_set_capability(onkey->input, EV_KEY, KEY_POWER);
+ input_set_capability(onkey->input, EV_KEY, KEY_SLEEP);
+
+ ret = input_register_device(onkey->input);
+ if (ret) {
+ dev_err(&pdev->dev,
+ "Failed to register input device.\n");
+ goto err_irq;
+ }
+
+ platform_set_drvdata(pdev, onkey);
+ return 0;
+
+err_irq:
+ free_irq(onkey->irq, onkey);
+ cancel_delayed_work_sync(&onkey->work);
+err:
+ return ret;
+}
+
+static int da9063_onkey_remove(struct platform_device *pdev)
+{
+ struct da9063_onkey *onkey = platform_get_drvdata(pdev);
+
+ free_irq(onkey->irq, onkey);
+ cancel_delayed_work_sync(&onkey->work);
+ input_unregister_device(onkey->input);
+ return 0;
+}
+
+static struct platform_driver da9063_onkey_driver = {
+ .probe = da9063_onkey_probe,
+ .remove = da9063_onkey_remove,
+ .driver = {
+ .name = DA9063_DRVNAME_ONKEY,
+ .owner = THIS_MODULE,
+ },
+};
+
+module_platform_driver(da9063_onkey_driver);
+
+MODULE_AUTHOR("S Twiss <[email protected]>");
+MODULE_DESCRIPTION("Onkey device driver for Dialog DA9063");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:" DA9063_DRVNAME_ONKEY);
diff --git a/drivers/mfd/da9063-core.c b/drivers/mfd/da9063-core.c
index facd361..b6d6f18 100644
--- a/drivers/mfd/da9063-core.c
+++ b/drivers/mfd/da9063-core.c
@@ -60,6 +60,7 @@ static struct resource da9063_rtc_resources[] = {
static struct resource da9063_onkey_resources[] = {
{
+ .name = "ONKEY",
.start = DA9063_IRQ_ONKEY,
.end = DA9063_IRQ_ONKEY,
.flags = IORESOURCE_IRQ,
@@ -97,6 +98,7 @@ static const struct mfd_cell da9063_devs[] = {
.name = DA9063_DRVNAME_ONKEY,
.num_resources = ARRAY_SIZE(da9063_onkey_resources),
.resources = da9063_onkey_resources,
+ .of_compatible = "dlg,da9063-onkey",
},
{
.name = DA9063_DRVNAME_RTC,
@@ -109,12 +111,64 @@ static const struct mfd_cell da9063_devs[] = {
},
};
+static int da9063_clear_fault_log(struct da9063 *da9063)
+{
+ int ret = 0;
+ int fault_log = 0;
+
+ ret = regmap_read(da9063->regmap, DA9063_REG_FAULT_LOG, &fault_log);
+ if (ret < 0) {
+ dev_err(da9063->dev, "Cannot read FAULT_LOG.\n");
+ return -EIO;
+ }
+
+ if (fault_log) {
+ if (fault_log & DA9063_TWD_ERROR)
+ dev_dbg(da9063->dev,
+ "Fault log entry detected: DA9063_TWD_ERROR\n");
+ if (fault_log & DA9063_POR)
+ dev_dbg(da9063->dev,
+ "Fault log entry detected: DA9063_POR\n");
+ if (fault_log & DA9063_VDD_FAULT)
+ dev_dbg(da9063->dev,
+ "Fault log entry detected: DA9063_VDD_FAULT\n");
+ if (fault_log & DA9063_VDD_START)
+ dev_dbg(da9063->dev,
+ "Fault log entry detected: DA9063_VDD_START\n");
+ if (fault_log & DA9063_TEMP_CRIT)
+ dev_dbg(da9063->dev,
+ "Fault log entry detected: DA9063_TEMP_CRIT\n");
+ if (fault_log & DA9063_KEY_RESET)
+ dev_dbg(da9063->dev,
+ "Fault log entry detected: DA9063_KEY_RESET\n");
+ if (fault_log & DA9063_NSHUTDOWN)
+ dev_dbg(da9063->dev,
+ "Fault log entry detected: DA9063_NSHUTDOWN\n");
+ if (fault_log & DA9063_WAIT_SHUT)
+ dev_dbg(da9063->dev,
+ "Fault log entry detected: DA9063_WAIT_SHUT\n");
+ }
+
+ ret = regmap_write(da9063->regmap,
+ DA9063_REG_FAULT_LOG,
+ fault_log);
+ if (ret < 0)
+ dev_err(da9063->dev,
+ "Cannot reset FAULT_LOG values %d\n", ret);
+
+ return ret;
+}
+
int da9063_device_init(struct da9063 *da9063, unsigned int irq)
{
struct da9063_pdata *pdata = da9063->dev->platform_data;
int model, variant_id, variant_code;
int ret;
+ ret = da9063_clear_fault_log(da9063);
+ if (ret < 0)
+ dev_err(da9063->dev, "Cannot clear fault log\n");
+
if (pdata) {
da9063->flags = pdata->flags;
da9063->irq_base = pdata->irq_base;
@@ -178,6 +232,7 @@ int da9063_device_init(struct da9063 *da9063, unsigned int irq)
if (ret)
dev_err(da9063->dev, "Cannot add MFD cells\n");
+
return ret;
}
diff --git a/include/linux/mfd/da9063/pdata.h b/include/linux/mfd/da9063/pdata.h
index 95c8742..612383b 100644
--- a/include/linux/mfd/da9063/pdata.h
+++ b/include/linux/mfd/da9063/pdata.h
@@ -103,6 +103,7 @@ struct da9063;
struct da9063_pdata {
int (*init)(struct da9063 *da9063);
int irq_base;
+ bool key_power;
unsigned flags;
struct da9063_regulators_pdata *regulators_pdata;
struct led_platform_data *leds_pdata;
--
end-of-patch for PATCH V2