The camera drivers are the ones that suffer additions/changes
on those days. Place them on the top of the I2C drivers.
Suggested-by: Hans Verkuil <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
---
drivers/media/i2c/Kconfig | 1688 ++++++++++++++++++-------------------
1 file changed, 844 insertions(+), 844 deletions(-)
diff --git a/drivers/media/i2c/Kconfig b/drivers/media/i2c/Kconfig
index 14fe94f3c772..fae2baabb773 100644
--- a/drivers/media/i2c/Kconfig
+++ b/drivers/media/i2c/Kconfig
@@ -21,6 +21,850 @@ config VIDEO_IR_I2C
In doubt, say Y.
+#
+# V4L2 I2C drivers that are related with Camera support
+#
+
+menu "Camera sensor devices"
+ visible if MEDIA_CAMERA_SUPPORT
+
+config VIDEO_APTINA_PLL
+ tristate
+
+config VIDEO_CCS_PLL
+ tristate
+
+config VIDEO_HI556
+ tristate "Hynix Hi-556 sensor support"
+ depends on I2C && VIDEO_DEV
+ select MEDIA_CONTROLLER
+ select VIDEO_V4L2_SUBDEV_API
+ select V4L2_FWNODE
+ help
+ This is a Video4Linux2 sensor driver for the Hynix
+ Hi-556 camera.
+
+ To compile this driver as a module, choose M here: the
+ module will be called hi556.
+
+config VIDEO_HI846
+ tristate "Hynix Hi-846 sensor support"
+ depends on I2C && VIDEO_DEV
+ select MEDIA_CONTROLLER
+ select VIDEO_V4L2_SUBDEV_API
+ select V4L2_FWNODE
+ help
+ This is a Video4Linux2 sensor driver for the Hynix
+ Hi-846 camera.
+
+ To compile this driver as a module, choose M here: the
+ module will be called hi846.
+
+config VIDEO_HI847
+ tristate "Hynix Hi-847 sensor support"
+ depends on I2C && VIDEO_DEV
+ select MEDIA_CONTROLLER
+ select VIDEO_V4L2_SUBDEV_API
+ select V4L2_FWNODE
+ help
+ This is a Video4Linux2 sensor driver for the Hynix
+ Hi-847 camera.
+
+ To compile this driver as a module, choose M here: the
+ module will be called hi847.
+
+config VIDEO_IMX208
+ tristate "Sony IMX208 sensor support"
+ depends on I2C && VIDEO_DEV && VIDEO_V4L2_SUBDEV_API
+ depends on MEDIA_CAMERA_SUPPORT
+ help
+ This is a Video4Linux2 sensor driver for the Sony
+ IMX208 camera.
+
+ To compile this driver as a module, choose M here: the
+ module will be called imx208.
+
+config VIDEO_IMX214
+ tristate "Sony IMX214 sensor support"
+ depends on GPIOLIB && I2C && VIDEO_DEV
+ select V4L2_FWNODE
+ select MEDIA_CONTROLLER
+ select VIDEO_V4L2_SUBDEV_API
+ select REGMAP_I2C
+ help
+ This is a Video4Linux2 sensor driver for the Sony
+ IMX214 camera.
+
+ To compile this driver as a module, choose M here: the
+ module will be called imx214.
+
+config VIDEO_IMX219
+ tristate "Sony IMX219 sensor support"
+ depends on I2C && VIDEO_DEV
+ select MEDIA_CONTROLLER
+ select VIDEO_V4L2_SUBDEV_API
+ select V4L2_FWNODE
+ help
+ This is a Video4Linux2 sensor driver for the Sony
+ IMX219 camera.
+
+ To compile this driver as a module, choose M here: the
+ module will be called imx219.
+
+config VIDEO_IMX258
+ tristate "Sony IMX258 sensor support"
+ depends on I2C && VIDEO_DEV
+ select MEDIA_CONTROLLER
+ select VIDEO_V4L2_SUBDEV_API
+ help
+ This is a Video4Linux2 sensor driver for the Sony
+ IMX258 camera.
+
+ To compile this driver as a module, choose M here: the
+ module will be called imx258.
+
+config VIDEO_IMX274
+ tristate "Sony IMX274 sensor support"
+ depends on I2C && VIDEO_DEV
+ select MEDIA_CONTROLLER
+ select VIDEO_V4L2_SUBDEV_API
+ select REGMAP_I2C
+ help
+ This is a V4L2 sensor driver for the Sony IMX274
+ CMOS image sensor.
+
+config VIDEO_IMX290
+ tristate "Sony IMX290 sensor support"
+ depends on I2C && VIDEO_DEV
+ select MEDIA_CONTROLLER
+ select VIDEO_V4L2_SUBDEV_API
+ select REGMAP_I2C
+ select V4L2_FWNODE
+ help
+ This is a Video4Linux2 sensor driver for the Sony
+ IMX290 camera sensor.
+
+ To compile this driver as a module, choose M here: the
+ module will be called imx290.
+
+config VIDEO_IMX319
+ tristate "Sony IMX319 sensor support"
+ depends on I2C && VIDEO_DEV
+ select MEDIA_CONTROLLER
+ select VIDEO_V4L2_SUBDEV_API
+ help
+ This is a Video4Linux2 sensor driver for the Sony
+ IMX319 camera.
+
+ To compile this driver as a module, choose M here: the
+ module will be called imx319.
+
+config VIDEO_IMX334
+ tristate "Sony IMX334 sensor support"
+ depends on OF_GPIO
+ depends on I2C && VIDEO_DEV
+ select VIDEO_V4L2_SUBDEV_API
+ select MEDIA_CONTROLLER
+ select V4L2_FWNODE
+ help
+ This is a Video4Linux2 sensor driver for the Sony
+ IMX334 camera.
+
+ To compile this driver as a module, choose M here: the
+ module will be called imx334.
+
+config VIDEO_IMX335
+ tristate "Sony IMX335 sensor support"
+ depends on OF_GPIO
+ depends on I2C && VIDEO_DEV
+ select VIDEO_V4L2_SUBDEV_API
+ select MEDIA_CONTROLLER
+ select V4L2_FWNODE
+ help
+ This is a Video4Linux2 sensor driver for the Sony
+ IMX335 camera.
+
+ To compile this driver as a module, choose M here: the
+ module will be called imx335.
+
+config VIDEO_IMX355
+ tristate "Sony IMX355 sensor support"
+ depends on I2C && VIDEO_DEV
+ select MEDIA_CONTROLLER
+ select VIDEO_V4L2_SUBDEV_API
+ help
+ This is a Video4Linux2 sensor driver for the Sony
+ IMX355 camera.
+
+ To compile this driver as a module, choose M here: the
+ module will be called imx355.
+
+config VIDEO_IMX412
+ tristate "Sony IMX412 sensor support"
+ depends on OF_GPIO
+ depends on I2C && VIDEO_DEV
+ select VIDEO_V4L2_SUBDEV_API
+ select MEDIA_CONTROLLER
+ select V4L2_FWNODE
+ help
+ This is a Video4Linux2 sensor driver for the Sony
+ IMX412 camera.
+
+ To compile this driver as a module, choose M here: the
+ module will be called imx412.
+
+config VIDEO_MAX9271_LIB
+ tristate
+
+config VIDEO_MT9M001
+ tristate "mt9m001 support"
+ depends on I2C && VIDEO_DEV
+ select MEDIA_CONTROLLER
+ select VIDEO_V4L2_SUBDEV_API
+ help
+ This driver supports MT9M001 cameras from Micron, monochrome
+ and colour models.
+
+config VIDEO_MT9M032
+ tristate "MT9M032 camera sensor support"
+ depends on I2C && VIDEO_DEV
+ select MEDIA_CONTROLLER
+ select VIDEO_V4L2_SUBDEV_API
+ select VIDEO_APTINA_PLL
+ help
+ This driver supports MT9M032 camera sensors from Aptina, monochrome
+ models only.
+
+config VIDEO_MT9M111
+ tristate "mt9m111, mt9m112 and mt9m131 support"
+ depends on I2C && VIDEO_DEV
+ select V4L2_FWNODE
+ help
+ This driver supports MT9M111, MT9M112 and MT9M131 cameras from
+ Micron/Aptina
+
+config VIDEO_MT9P031
+ tristate "Aptina MT9P031 support"
+ depends on I2C && VIDEO_DEV
+ select MEDIA_CONTROLLER
+ select VIDEO_V4L2_SUBDEV_API
+ select VIDEO_APTINA_PLL
+ select V4L2_FWNODE
+ help
+ This is a Video4Linux2 sensor driver for the Aptina
+ (Micron) mt9p031 5 Mpixel camera.
+
+config VIDEO_MT9T001
+ tristate "Aptina MT9T001 support"
+ depends on I2C && VIDEO_DEV
+ select MEDIA_CONTROLLER
+ select VIDEO_V4L2_SUBDEV_API
+ help
+ This is a Video4Linux2 sensor driver for the Aptina
+ (Micron) mt0t001 3 Mpixel camera.
+
+config VIDEO_MT9T112
+ tristate "Aptina MT9T111/MT9T112 support"
+ depends on I2C && VIDEO_DEV
+ help
+ This is a Video4Linux2 sensor driver for the Aptina
+ (Micron) MT9T111 and MT9T112 3 Mpixel camera.
+
+ To compile this driver as a module, choose M here: the
+ module will be called mt9t112.
+
+config VIDEO_MT9V011
+ tristate "Micron mt9v011 sensor support"
+ depends on I2C && VIDEO_DEV
+ help
+ This is a Video4Linux2 sensor driver for the Micron
+ mt0v011 1.3 Mpixel camera. It currently only works with the
+ em28xx driver.
+
+config VIDEO_MT9V032
+ tristate "Micron MT9V032 sensor support"
+ depends on I2C && VIDEO_DEV
+ select MEDIA_CONTROLLER
+ select VIDEO_V4L2_SUBDEV_API
+ select REGMAP_I2C
+ select V4L2_FWNODE
+ help
+ This is a Video4Linux2 sensor driver for the Micron
+ MT9V032 752x480 CMOS sensor.
+
+config VIDEO_MT9V111
+ tristate "Aptina MT9V111 sensor support"
+ depends on I2C && VIDEO_DEV
+ help
+ This is a Video4Linux2 sensor driver for the Aptina/Micron
+ MT9V111 sensor.
+
+ To compile this driver as a module, choose M here: the
+ module will be called mt9v111.
+
+config VIDEO_NOON010PC30
+ tristate "Siliconfile NOON010PC30 sensor support"
+ depends on I2C && VIDEO_DEV
+ select MEDIA_CONTROLLER
+ select VIDEO_V4L2_SUBDEV_API
+ help
+ This driver supports NOON010PC30 CIF camera from Siliconfile
+
+config VIDEO_OG01A1B
+ tristate "OmniVision OG01A1B sensor support"
+ depends on I2C && VIDEO_DEV
+ select MEDIA_CONTROLLER
+ select VIDEO_V4L2_SUBDEV_API
+ select V4L2_FWNODE
+ help
+ This is a Video4Linux2 sensor driver for the OmniVision
+ OG01A1B camera.
+
+ To compile this driver as a module, choose M here: the
+ module will be called og01a1b.
+
+config VIDEO_OV02A10
+ tristate "OmniVision OV02A10 sensor support"
+ depends on VIDEO_DEV && I2C
+ select MEDIA_CONTROLLER
+ select VIDEO_V4L2_SUBDEV_API
+ select V4L2_FWNODE
+ help
+ This is a Video4Linux2 sensor driver for the OmniVision
+ OV02A10 camera.
+
+ To compile this driver as a module, choose M here: the
+ module will be called ov02a10.
+
+config VIDEO_OV08D10
+ tristate "OmniVision OV08D10 sensor support"
+ depends on I2C && VIDEO_DEV
+ select MEDIA_CONTROLLER
+ select VIDEO_V4L2_SUBDEV_API
+ select V4L2_FWNODE
+ help
+ This is a Video4Linux2 sensor driver for the OmniVision
+ OV08D10 camera sensor.
+
+ To compile this driver as a module, choose M here: the
+ module will be called ov08d10.
+
+config VIDEO_OV13858
+ tristate "OmniVision OV13858 sensor support"
+ depends on I2C && VIDEO_DEV
+ select MEDIA_CONTROLLER
+ select VIDEO_V4L2_SUBDEV_API
+ select V4L2_FWNODE
+ help
+ This is a Video4Linux2 sensor driver for the OmniVision
+ OV13858 camera.
+
+config VIDEO_OV13B10
+ tristate "OmniVision OV13B10 sensor support"
+ depends on I2C && VIDEO_DEV
+ select MEDIA_CONTROLLER
+ select VIDEO_V4L2_SUBDEV_API
+ select V4L2_FWNODE
+ help
+ This is a Video4Linux2 sensor driver for the OmniVision
+ OV13B10 camera.
+
+config VIDEO_OV2640
+ tristate "OmniVision OV2640 sensor support"
+ depends on VIDEO_DEV && I2C
+ help
+ This is a Video4Linux2 sensor driver for the OmniVision
+ OV2640 camera.
+
+ To compile this driver as a module, choose M here: the
+ module will be called ov2640.
+
+config VIDEO_OV2659
+ tristate "OmniVision OV2659 sensor support"
+ depends on VIDEO_DEV && I2C && GPIOLIB
+ select V4L2_FWNODE
+ help
+ This is a Video4Linux2 sensor driver for the OmniVision
+ OV2659 camera.
+
+ To compile this driver as a module, choose M here: the
+ module will be called ov2659.
+
+config VIDEO_OV2680
+ tristate "OmniVision OV2680 sensor support"
+ depends on VIDEO_DEV && I2C
+ select MEDIA_CONTROLLER
+ select V4L2_FWNODE
+ help
+ This is a Video4Linux2 sensor driver for the OmniVision
+ OV2680 camera.
+
+ To compile this driver as a module, choose M here: the
+ module will be called ov2680.
+
+config VIDEO_OV2685
+ tristate "OmniVision OV2685 sensor support"
+ depends on VIDEO_DEV && I2C
+ select MEDIA_CONTROLLER
+ select V4L2_FWNODE
+ help
+ This is a Video4Linux2 sensor driver for the OmniVision
+ OV2685 camera.
+
+ To compile this driver as a module, choose M here: the
+ module will be called ov2685.
+
+config VIDEO_OV2740
+ tristate "OmniVision OV2740 sensor support"
+ depends on VIDEO_DEV && I2C
+ depends on ACPI || COMPILE_TEST
+ select MEDIA_CONTROLLER
+ select VIDEO_V4L2_SUBDEV_API
+ select V4L2_FWNODE
+ select REGMAP_I2C
+ help
+ This is a Video4Linux2 sensor driver for the OmniVision
+ OV2740 camera.
+
+ To compile this driver as a module, choose M here: the
+ module will be called ov2740.
+
+config VIDEO_OV5640
+ tristate "OmniVision OV5640 sensor support"
+ depends on OF
+ depends on GPIOLIB && VIDEO_DEV && I2C
+ select MEDIA_CONTROLLER
+ select VIDEO_V4L2_SUBDEV_API
+ select V4L2_FWNODE
+ help
+ This is a Video4Linux2 sensor driver for the Omnivision
+ OV5640 camera sensor with a MIPI CSI-2 interface.
+
+config VIDEO_OV5645
+ tristate "OmniVision OV5645 sensor support"
+ depends on OF
+ depends on I2C && VIDEO_DEV
+ select MEDIA_CONTROLLER
+ select VIDEO_V4L2_SUBDEV_API
+ select V4L2_FWNODE
+ help
+ This is a Video4Linux2 sensor driver for the OmniVision
+ OV5645 camera.
+
+ To compile this driver as a module, choose M here: the
+ module will be called ov5645.
+
+config VIDEO_OV5647
+ tristate "OmniVision OV5647 sensor support"
+ depends on I2C && VIDEO_DEV
+ select MEDIA_CONTROLLER
+ select VIDEO_V4L2_SUBDEV_API
+ select V4L2_FWNODE
+ help
+ This is a Video4Linux2 sensor driver for the OmniVision
+ OV5647 camera.
+
+ To compile this driver as a module, choose M here: the
+ module will be called ov5647.
+
+config VIDEO_OV5648
+ tristate "OmniVision OV5648 sensor support"
+ depends on I2C && PM && VIDEO_DEV
+ select MEDIA_CONTROLLER
+ select VIDEO_V4L2_SUBDEV_API
+ select V4L2_FWNODE
+ help
+ This is a Video4Linux2 sensor driver for the OmniVision
+ OV5648 camera.
+
+ To compile this driver as a module, choose M here: the
+ module will be called ov5648.
+
+config VIDEO_OV5670
+ tristate "OmniVision OV5670 sensor support"
+ depends on I2C && VIDEO_DEV
+ select MEDIA_CONTROLLER
+ select VIDEO_V4L2_SUBDEV_API
+ select V4L2_FWNODE
+ help
+ This is a Video4Linux2 sensor driver for the OmniVision
+ OV5670 camera.
+
+ To compile this driver as a module, choose M here: the
+ module will be called ov5670.
+
+config VIDEO_OV5675
+ tristate "OmniVision OV5675 sensor support"
+ depends on I2C && VIDEO_DEV
+ select MEDIA_CONTROLLER
+ select VIDEO_V4L2_SUBDEV_API
+ select V4L2_FWNODE
+ help
+ This is a Video4Linux2 sensor driver for the OmniVision
+ OV5675 camera.
+
+ To compile this driver as a module, choose M here: the
+ module will be called ov5675.
+
+config VIDEO_OV5693
+ tristate "OmniVision OV5693 sensor support"
+ depends on I2C && VIDEO_DEV
+ select V4L2_FWNODE
+ help
+ This is a Video4Linux2 sensor driver for the OmniVision
+ OV5693 camera.
+
+ To compile this driver as a module, choose M here: the
+ module will be called ov5693.
+
+config VIDEO_OV5695
+ tristate "OmniVision OV5695 sensor support"
+ depends on I2C && VIDEO_DEV
+ select V4L2_FWNODE
+ help
+ This is a Video4Linux2 sensor driver for the OmniVision
+ OV5695 camera.
+
+ To compile this driver as a module, choose M here: the
+ module will be called ov5695.
+
+config VIDEO_OV6650
+ tristate "OmniVision OV6650 sensor support"
+ depends on I2C && VIDEO_DEV
+ help
+ This is a Video4Linux2 sensor driver for the OmniVision
+ OV6650 camera.
+
+ To compile this driver as a module, choose M here: the
+ module will be called ov6650.
+
+config VIDEO_OV7251
+ tristate "OmniVision OV7251 sensor support"
+ depends on I2C && VIDEO_DEV
+ select MEDIA_CONTROLLER
+ select VIDEO_V4L2_SUBDEV_API
+ select V4L2_FWNODE
+ help
+ This is a Video4Linux2 sensor driver for the OmniVision
+ OV7251 camera.
+
+ To compile this driver as a module, choose M here: the
+ module will be called ov7251.
+
+config VIDEO_OV7640
+ tristate "OmniVision OV7640 sensor support"
+ depends on I2C && VIDEO_DEV
+ help
+ This is a Video4Linux2 sensor driver for the OmniVision
+ OV7640 camera.
+
+ To compile this driver as a module, choose M here: the
+ module will be called ov7640.
+
+config VIDEO_OV7670
+ tristate "OmniVision OV7670 sensor support"
+ depends on I2C && VIDEO_DEV
+ select V4L2_FWNODE
+ help
+ This is a Video4Linux2 sensor driver for the OmniVision
+ OV7670 VGA camera. It currently only works with the M88ALP01
+ controller.
+
+config VIDEO_OV772X
+ tristate "OmniVision OV772x sensor support"
+ depends on I2C && VIDEO_DEV
+ select REGMAP_SCCB
+ select V4L2_FWNODE
+ help
+ This is a Video4Linux2 sensor driver for the OmniVision
+ OV772x camera.
+
+ To compile this driver as a module, choose M here: the
+ module will be called ov772x.
+
+config VIDEO_OV7740
+ tristate "OmniVision OV7740 sensor support"
+ depends on I2C && VIDEO_DEV
+ select REGMAP_SCCB
+ help
+ This is a Video4Linux2 sensor driver for the OmniVision
+ OV7740 VGA camera sensor.
+
+config VIDEO_OV8856
+ tristate "OmniVision OV8856 sensor support"
+ depends on I2C && VIDEO_DEV
+ select MEDIA_CONTROLLER
+ select VIDEO_V4L2_SUBDEV_API
+ select V4L2_FWNODE
+ help
+ This is a Video4Linux2 sensor driver for the OmniVision
+ OV8856 camera sensor.
+
+ To compile this driver as a module, choose M here: the
+ module will be called ov8856.
+
+config VIDEO_OV8865
+ tristate "OmniVision OV8865 sensor support"
+ depends on I2C && PM && VIDEO_DEV
+ select MEDIA_CONTROLLER
+ select VIDEO_V4L2_SUBDEV_API
+ select V4L2_FWNODE
+ help
+ This is a Video4Linux2 sensor driver for OmniVision
+ OV8865 camera sensor.
+
+ To compile this driver as a module, choose M here: the
+ module will be called ov8865.
+
+config VIDEO_OV9282
+ tristate "OmniVision OV9282 sensor support"
+ depends on OF_GPIO
+ depends on I2C && VIDEO_DEV
+ select VIDEO_V4L2_SUBDEV_API
+ select MEDIA_CONTROLLER
+ select V4L2_FWNODE
+ help
+ This is a Video4Linux2 sensor driver for the OmniVision
+ OV9282 camera sensor.
+
+ To compile this driver as a module, choose M here: the
+ module will be called ov9282.
+
+config VIDEO_OV9640
+ tristate "OmniVision OV9640 sensor support"
+ depends on I2C && VIDEO_DEV
+ help
+ This is a Video4Linux2 sensor driver for the OmniVision
+ OV9640 camera sensor.
+
+config VIDEO_OV9650
+ tristate "OmniVision OV9650/OV9652 sensor support"
+ depends on I2C && VIDEO_DEV
+ select MEDIA_CONTROLLER
+ select VIDEO_V4L2_SUBDEV_API
+ select REGMAP_SCCB
+ help
+ This is a V4L2 sensor driver for the Omnivision
+ OV9650 and OV9652 camera sensors.
+
+config VIDEO_OV9734
+ tristate "OmniVision OV9734 sensor support"
+ depends on VIDEO_DEV && I2C
+ depends on ACPI || COMPILE_TEST
+ select MEDIA_CONTROLLER
+ select VIDEO_V4L2_SUBDEV_API
+ select V4L2_FWNODE
+ help
+ This is a Video4Linux2 sensor driver for the OmniVision
+ OV9734 camera.
+
+ To compile this driver as a module, choose M here: the
+ module's name is ov9734.
+
+config VIDEO_RDACM20
+ tristate "IMI RDACM20 camera support"
+ depends on I2C
+ select V4L2_FWNODE
+ select VIDEO_V4L2_SUBDEV_API
+ select MEDIA_CONTROLLER
+ select VIDEO_MAX9271_LIB
+ help
+ This driver supports the IMI RDACM20 GMSL camera, used in
+ ADAS systems.
+
+ This camera should be used in conjunction with a GMSL
+ deserialiser such as the MAX9286.
+
+config VIDEO_RDACM21
+ tristate "IMI RDACM21 camera support"
+ depends on I2C
+ select V4L2_FWNODE
+ select VIDEO_V4L2_SUBDEV_API
+ select MEDIA_CONTROLLER
+ select VIDEO_MAX9271_LIB
+ help
+ This driver supports the IMI RDACM21 GMSL camera, used in
+ ADAS systems.
+
+ This camera should be used in conjunction with a GMSL
+ deserialiser such as the MAX9286.
+
+config VIDEO_RJ54N1
+ tristate "Sharp RJ54N1CB0C sensor support"
+ depends on I2C && VIDEO_DEV
+ help
+ This is a V4L2 sensor driver for Sharp RJ54N1CB0C CMOS image
+ sensor.
+
+ To compile this driver as a module, choose M here: the
+ module will be called rj54n1.
+
+config VIDEO_S5C73M3
+ tristate "Samsung S5C73M3 sensor support"
+ depends on I2C && SPI && VIDEO_DEV
+ select MEDIA_CONTROLLER
+ select VIDEO_V4L2_SUBDEV_API
+ select V4L2_FWNODE
+ help
+ This is a V4L2 sensor driver for Samsung S5C73M3
+ 8 Mpixel camera.
+
+config VIDEO_S5K4ECGX
+ tristate "Samsung S5K4ECGX sensor support"
+ depends on I2C && VIDEO_DEV
+ select MEDIA_CONTROLLER
+ select VIDEO_V4L2_SUBDEV_API
+ select CRC32
+ help
+ This is a V4L2 sensor driver for Samsung S5K4ECGX 5M
+ camera sensor with an embedded SoC image signal processor.
+
+config VIDEO_S5K5BAF
+ tristate "Samsung S5K5BAF sensor support"
+ depends on I2C && VIDEO_DEV
+ select MEDIA_CONTROLLER
+ select VIDEO_V4L2_SUBDEV_API
+ select V4L2_FWNODE
+ help
+ This is a V4L2 sensor driver for Samsung S5K5BAF 2M
+ camera sensor with an embedded SoC image signal processor.
+
+config VIDEO_S5K6A3
+ tristate "Samsung S5K6A3 sensor support"
+ depends on I2C && VIDEO_DEV
+ select MEDIA_CONTROLLER
+ select VIDEO_V4L2_SUBDEV_API
+ help
+ This is a V4L2 sensor driver for Samsung S5K6A3 raw
+ camera sensor.
+
+config VIDEO_S5K6AA
+ tristate "Samsung S5K6AAFX sensor support"
+ depends on I2C && VIDEO_DEV
+ select MEDIA_CONTROLLER
+ select VIDEO_V4L2_SUBDEV_API
+ help
+ This is a V4L2 sensor driver for Samsung S5K6AA(FX) 1.3M
+ camera sensor with an embedded SoC image signal processor.
+
+config VIDEO_SR030PC30
+ tristate "Siliconfile SR030PC30 sensor support"
+ depends on I2C && VIDEO_DEV
+ help
+ This driver supports SR030PC30 VGA camera from Siliconfile
+
+config VIDEO_VS6624
+ tristate "ST VS6624 sensor support"
+ depends on VIDEO_DEV && I2C
+ help
+ This is a Video4Linux2 sensor driver for the ST VS6624
+ camera.
+
+ To compile this driver as a module, choose M here: the
+ module will be called vs6624.
+
+source "drivers/media/i2c/ccs/Kconfig"
+source "drivers/media/i2c/et8ek8/Kconfig"
+source "drivers/media/i2c/m5mols/Kconfig"
+
+endmenu
+
+menu "Lens drivers"
+ visible if MEDIA_CAMERA_SUPPORT
+
+config VIDEO_AD5820
+ tristate "AD5820 lens voice coil support"
+ depends on GPIOLIB && I2C && VIDEO_DEV
+ select MEDIA_CONTROLLER
+ select V4L2_ASYNC
+ help
+ This is a driver for the AD5820 camera lens voice coil.
+ It is used for example in Nokia N900 (RX-51).
+
+config VIDEO_AK7375
+ tristate "AK7375 lens voice coil support"
+ depends on I2C && VIDEO_DEV
+ select MEDIA_CONTROLLER
+ select VIDEO_V4L2_SUBDEV_API
+ select V4L2_ASYNC
+ help
+ This is a driver for the AK7375 camera lens voice coil.
+ AK7375 is a 12 bit DAC with 120mA output current sink
+ capability. This is designed for linear control of
+ voice coil motors, controlled via I2C serial interface.
+
+config VIDEO_DW9714
+ tristate "DW9714 lens voice coil support"
+ depends on I2C && VIDEO_DEV
+ select MEDIA_CONTROLLER
+ select VIDEO_V4L2_SUBDEV_API
+ select V4L2_ASYNC
+ help
+ This is a driver for the DW9714 camera lens voice coil.
+ DW9714 is a 10 bit DAC with 120mA output current sink
+ capability. This is designed for linear control of
+ voice coil motors, controlled via I2C serial interface.
+
+config VIDEO_DW9768
+ tristate "DW9768 lens voice coil support"
+ depends on I2C && VIDEO_DEV
+ select MEDIA_CONTROLLER
+ select VIDEO_V4L2_SUBDEV_API
+ select V4L2_FWNODE
+ help
+ This is a driver for the DW9768 camera lens voice coil.
+ DW9768 is a 10 bit DAC with 100mA output current sink
+ capability. This is designed for linear control of
+ voice coil motors, controlled via I2C serial interface.
+
+config VIDEO_DW9807_VCM
+ tristate "DW9807 lens voice coil support"
+ depends on I2C && VIDEO_DEV
+ select MEDIA_CONTROLLER
+ select VIDEO_V4L2_SUBDEV_API
+ select V4L2_ASYNC
+ help
+ This is a driver for the DW9807 camera lens voice coil.
+ DW9807 is a 10 bit DAC with 100mA output current sink
+ capability. This is designed for linear control of
+ voice coil motors, controlled via I2C serial interface.
+
+endmenu
+
+menu "Flash devices"
+ visible if MEDIA_CAMERA_SUPPORT
+
+config VIDEO_ADP1653
+ tristate "ADP1653 flash support"
+ depends on I2C && VIDEO_DEV
+ select MEDIA_CONTROLLER
+ select V4L2_ASYNC
+ help
+ This is a driver for the ADP1653 flash controller. It is used for
+ example in Nokia N900.
+
+config VIDEO_LM3560
+ tristate "LM3560 dual flash driver support"
+ depends on I2C && VIDEO_DEV
+ select MEDIA_CONTROLLER
+ select REGMAP_I2C
+ select V4L2_ASYNC
+ help
+ This is a driver for the lm3560 dual flash controllers. It controls
+ flash, torch LEDs.
+
+config VIDEO_LM3646
+ tristate "LM3646 dual flash driver support"
+ depends on I2C && VIDEO_DEV
+ select MEDIA_CONTROLLER
+ select REGMAP_I2C
+ select V4L2_ASYNC
+ help
+ This is a driver for the lm3646 dual flash controllers. It controls
+ flash, torch LEDs.
+
+endmenu
+
#
# V4L2 I2C drivers that aren't related with Camera support
#
@@ -734,848 +1578,4 @@ config VIDEO_THS7303
endmenu
-#
-# V4L2 I2C drivers that are related with Camera support
-#
-
-menu "Camera sensor devices"
- visible if MEDIA_CAMERA_SUPPORT
-
-config VIDEO_APTINA_PLL
- tristate
-
-config VIDEO_CCS_PLL
- tristate
-
-config VIDEO_HI556
- tristate "Hynix Hi-556 sensor support"
- depends on I2C && VIDEO_DEV
- select MEDIA_CONTROLLER
- select VIDEO_V4L2_SUBDEV_API
- select V4L2_FWNODE
- help
- This is a Video4Linux2 sensor driver for the Hynix
- Hi-556 camera.
-
- To compile this driver as a module, choose M here: the
- module will be called hi556.
-
-config VIDEO_HI846
- tristate "Hynix Hi-846 sensor support"
- depends on I2C && VIDEO_DEV
- select MEDIA_CONTROLLER
- select VIDEO_V4L2_SUBDEV_API
- select V4L2_FWNODE
- help
- This is a Video4Linux2 sensor driver for the Hynix
- Hi-846 camera.
-
- To compile this driver as a module, choose M here: the
- module will be called hi846.
-
-config VIDEO_HI847
- tristate "Hynix Hi-847 sensor support"
- depends on I2C && VIDEO_DEV
- select MEDIA_CONTROLLER
- select VIDEO_V4L2_SUBDEV_API
- select V4L2_FWNODE
- help
- This is a Video4Linux2 sensor driver for the Hynix
- Hi-847 camera.
-
- To compile this driver as a module, choose M here: the
- module will be called hi847.
-
-config VIDEO_IMX208
- tristate "Sony IMX208 sensor support"
- depends on I2C && VIDEO_DEV && VIDEO_V4L2_SUBDEV_API
- depends on MEDIA_CAMERA_SUPPORT
- help
- This is a Video4Linux2 sensor driver for the Sony
- IMX208 camera.
-
- To compile this driver as a module, choose M here: the
- module will be called imx208.
-
-config VIDEO_IMX214
- tristate "Sony IMX214 sensor support"
- depends on GPIOLIB && I2C && VIDEO_DEV
- select V4L2_FWNODE
- select MEDIA_CONTROLLER
- select VIDEO_V4L2_SUBDEV_API
- select REGMAP_I2C
- help
- This is a Video4Linux2 sensor driver for the Sony
- IMX214 camera.
-
- To compile this driver as a module, choose M here: the
- module will be called imx214.
-
-config VIDEO_IMX219
- tristate "Sony IMX219 sensor support"
- depends on I2C && VIDEO_DEV
- select MEDIA_CONTROLLER
- select VIDEO_V4L2_SUBDEV_API
- select V4L2_FWNODE
- help
- This is a Video4Linux2 sensor driver for the Sony
- IMX219 camera.
-
- To compile this driver as a module, choose M here: the
- module will be called imx219.
-
-config VIDEO_IMX258
- tristate "Sony IMX258 sensor support"
- depends on I2C && VIDEO_DEV
- select MEDIA_CONTROLLER
- select VIDEO_V4L2_SUBDEV_API
- help
- This is a Video4Linux2 sensor driver for the Sony
- IMX258 camera.
-
- To compile this driver as a module, choose M here: the
- module will be called imx258.
-
-config VIDEO_IMX274
- tristate "Sony IMX274 sensor support"
- depends on I2C && VIDEO_DEV
- select MEDIA_CONTROLLER
- select VIDEO_V4L2_SUBDEV_API
- select REGMAP_I2C
- help
- This is a V4L2 sensor driver for the Sony IMX274
- CMOS image sensor.
-
-config VIDEO_IMX290
- tristate "Sony IMX290 sensor support"
- depends on I2C && VIDEO_DEV
- select MEDIA_CONTROLLER
- select VIDEO_V4L2_SUBDEV_API
- select REGMAP_I2C
- select V4L2_FWNODE
- help
- This is a Video4Linux2 sensor driver for the Sony
- IMX290 camera sensor.
-
- To compile this driver as a module, choose M here: the
- module will be called imx290.
-
-config VIDEO_IMX319
- tristate "Sony IMX319 sensor support"
- depends on I2C && VIDEO_DEV
- select MEDIA_CONTROLLER
- select VIDEO_V4L2_SUBDEV_API
- help
- This is a Video4Linux2 sensor driver for the Sony
- IMX319 camera.
-
- To compile this driver as a module, choose M here: the
- module will be called imx319.
-
-config VIDEO_IMX334
- tristate "Sony IMX334 sensor support"
- depends on OF_GPIO
- depends on I2C && VIDEO_DEV
- select VIDEO_V4L2_SUBDEV_API
- select MEDIA_CONTROLLER
- select V4L2_FWNODE
- help
- This is a Video4Linux2 sensor driver for the Sony
- IMX334 camera.
-
- To compile this driver as a module, choose M here: the
- module will be called imx334.
-
-config VIDEO_IMX335
- tristate "Sony IMX335 sensor support"
- depends on OF_GPIO
- depends on I2C && VIDEO_DEV
- select VIDEO_V4L2_SUBDEV_API
- select MEDIA_CONTROLLER
- select V4L2_FWNODE
- help
- This is a Video4Linux2 sensor driver for the Sony
- IMX335 camera.
-
- To compile this driver as a module, choose M here: the
- module will be called imx335.
-
-config VIDEO_IMX355
- tristate "Sony IMX355 sensor support"
- depends on I2C && VIDEO_DEV
- select MEDIA_CONTROLLER
- select VIDEO_V4L2_SUBDEV_API
- help
- This is a Video4Linux2 sensor driver for the Sony
- IMX355 camera.
-
- To compile this driver as a module, choose M here: the
- module will be called imx355.
-
-config VIDEO_IMX412
- tristate "Sony IMX412 sensor support"
- depends on OF_GPIO
- depends on I2C && VIDEO_DEV
- select VIDEO_V4L2_SUBDEV_API
- select MEDIA_CONTROLLER
- select V4L2_FWNODE
- help
- This is a Video4Linux2 sensor driver for the Sony
- IMX412 camera.
-
- To compile this driver as a module, choose M here: the
- module will be called imx412.
-
-config VIDEO_MAX9271_LIB
- tristate
-
-config VIDEO_MT9M001
- tristate "mt9m001 support"
- depends on I2C && VIDEO_DEV
- select MEDIA_CONTROLLER
- select VIDEO_V4L2_SUBDEV_API
- help
- This driver supports MT9M001 cameras from Micron, monochrome
- and colour models.
-
-config VIDEO_MT9M032
- tristate "MT9M032 camera sensor support"
- depends on I2C && VIDEO_DEV
- select MEDIA_CONTROLLER
- select VIDEO_V4L2_SUBDEV_API
- select VIDEO_APTINA_PLL
- help
- This driver supports MT9M032 camera sensors from Aptina, monochrome
- models only.
-
-config VIDEO_MT9M111
- tristate "mt9m111, mt9m112 and mt9m131 support"
- depends on I2C && VIDEO_DEV
- select V4L2_FWNODE
- help
- This driver supports MT9M111, MT9M112 and MT9M131 cameras from
- Micron/Aptina
-
-config VIDEO_MT9P031
- tristate "Aptina MT9P031 support"
- depends on I2C && VIDEO_DEV
- select MEDIA_CONTROLLER
- select VIDEO_V4L2_SUBDEV_API
- select VIDEO_APTINA_PLL
- select V4L2_FWNODE
- help
- This is a Video4Linux2 sensor driver for the Aptina
- (Micron) mt9p031 5 Mpixel camera.
-
-config VIDEO_MT9T001
- tristate "Aptina MT9T001 support"
- depends on I2C && VIDEO_DEV
- select MEDIA_CONTROLLER
- select VIDEO_V4L2_SUBDEV_API
- help
- This is a Video4Linux2 sensor driver for the Aptina
- (Micron) mt0t001 3 Mpixel camera.
-
-config VIDEO_MT9T112
- tristate "Aptina MT9T111/MT9T112 support"
- depends on I2C && VIDEO_DEV
- help
- This is a Video4Linux2 sensor driver for the Aptina
- (Micron) MT9T111 and MT9T112 3 Mpixel camera.
-
- To compile this driver as a module, choose M here: the
- module will be called mt9t112.
-
-config VIDEO_MT9V011
- tristate "Micron mt9v011 sensor support"
- depends on I2C && VIDEO_DEV
- help
- This is a Video4Linux2 sensor driver for the Micron
- mt0v011 1.3 Mpixel camera. It currently only works with the
- em28xx driver.
-
-config VIDEO_MT9V032
- tristate "Micron MT9V032 sensor support"
- depends on I2C && VIDEO_DEV
- select MEDIA_CONTROLLER
- select VIDEO_V4L2_SUBDEV_API
- select REGMAP_I2C
- select V4L2_FWNODE
- help
- This is a Video4Linux2 sensor driver for the Micron
- MT9V032 752x480 CMOS sensor.
-
-config VIDEO_MT9V111
- tristate "Aptina MT9V111 sensor support"
- depends on I2C && VIDEO_DEV
- help
- This is a Video4Linux2 sensor driver for the Aptina/Micron
- MT9V111 sensor.
-
- To compile this driver as a module, choose M here: the
- module will be called mt9v111.
-
-config VIDEO_NOON010PC30
- tristate "Siliconfile NOON010PC30 sensor support"
- depends on I2C && VIDEO_DEV
- select MEDIA_CONTROLLER
- select VIDEO_V4L2_SUBDEV_API
- help
- This driver supports NOON010PC30 CIF camera from Siliconfile
-
-config VIDEO_OG01A1B
- tristate "OmniVision OG01A1B sensor support"
- depends on I2C && VIDEO_DEV
- select MEDIA_CONTROLLER
- select VIDEO_V4L2_SUBDEV_API
- select V4L2_FWNODE
- help
- This is a Video4Linux2 sensor driver for the OmniVision
- OG01A1B camera.
-
- To compile this driver as a module, choose M here: the
- module will be called og01a1b.
-
-config VIDEO_OV02A10
- tristate "OmniVision OV02A10 sensor support"
- depends on VIDEO_DEV && I2C
- select MEDIA_CONTROLLER
- select VIDEO_V4L2_SUBDEV_API
- select V4L2_FWNODE
- help
- This is a Video4Linux2 sensor driver for the OmniVision
- OV02A10 camera.
-
- To compile this driver as a module, choose M here: the
- module will be called ov02a10.
-
-config VIDEO_OV08D10
- tristate "OmniVision OV08D10 sensor support"
- depends on I2C && VIDEO_DEV
- select MEDIA_CONTROLLER
- select VIDEO_V4L2_SUBDEV_API
- select V4L2_FWNODE
- help
- This is a Video4Linux2 sensor driver for the OmniVision
- OV08D10 camera sensor.
-
- To compile this driver as a module, choose M here: the
- module will be called ov08d10.
-
-config VIDEO_OV13858
- tristate "OmniVision OV13858 sensor support"
- depends on I2C && VIDEO_DEV
- select MEDIA_CONTROLLER
- select VIDEO_V4L2_SUBDEV_API
- select V4L2_FWNODE
- help
- This is a Video4Linux2 sensor driver for the OmniVision
- OV13858 camera.
-
-config VIDEO_OV13B10
- tristate "OmniVision OV13B10 sensor support"
- depends on I2C && VIDEO_DEV
- select MEDIA_CONTROLLER
- select VIDEO_V4L2_SUBDEV_API
- select V4L2_FWNODE
- help
- This is a Video4Linux2 sensor driver for the OmniVision
- OV13B10 camera.
-
-config VIDEO_OV2640
- tristate "OmniVision OV2640 sensor support"
- depends on VIDEO_DEV && I2C
- help
- This is a Video4Linux2 sensor driver for the OmniVision
- OV2640 camera.
-
- To compile this driver as a module, choose M here: the
- module will be called ov2640.
-
-config VIDEO_OV2659
- tristate "OmniVision OV2659 sensor support"
- depends on VIDEO_DEV && I2C && GPIOLIB
- select V4L2_FWNODE
- help
- This is a Video4Linux2 sensor driver for the OmniVision
- OV2659 camera.
-
- To compile this driver as a module, choose M here: the
- module will be called ov2659.
-
-config VIDEO_OV2680
- tristate "OmniVision OV2680 sensor support"
- depends on VIDEO_DEV && I2C
- select MEDIA_CONTROLLER
- select V4L2_FWNODE
- help
- This is a Video4Linux2 sensor driver for the OmniVision
- OV2680 camera.
-
- To compile this driver as a module, choose M here: the
- module will be called ov2680.
-
-config VIDEO_OV2685
- tristate "OmniVision OV2685 sensor support"
- depends on VIDEO_DEV && I2C
- select MEDIA_CONTROLLER
- select V4L2_FWNODE
- help
- This is a Video4Linux2 sensor driver for the OmniVision
- OV2685 camera.
-
- To compile this driver as a module, choose M here: the
- module will be called ov2685.
-
-config VIDEO_OV2740
- tristate "OmniVision OV2740 sensor support"
- depends on VIDEO_DEV && I2C
- depends on ACPI || COMPILE_TEST
- select MEDIA_CONTROLLER
- select VIDEO_V4L2_SUBDEV_API
- select V4L2_FWNODE
- select REGMAP_I2C
- help
- This is a Video4Linux2 sensor driver for the OmniVision
- OV2740 camera.
-
- To compile this driver as a module, choose M here: the
- module will be called ov2740.
-
-config VIDEO_OV5640
- tristate "OmniVision OV5640 sensor support"
- depends on OF
- depends on GPIOLIB && VIDEO_DEV && I2C
- select MEDIA_CONTROLLER
- select VIDEO_V4L2_SUBDEV_API
- select V4L2_FWNODE
- help
- This is a Video4Linux2 sensor driver for the Omnivision
- OV5640 camera sensor with a MIPI CSI-2 interface.
-
-config VIDEO_OV5645
- tristate "OmniVision OV5645 sensor support"
- depends on OF
- depends on I2C && VIDEO_DEV
- select MEDIA_CONTROLLER
- select VIDEO_V4L2_SUBDEV_API
- select V4L2_FWNODE
- help
- This is a Video4Linux2 sensor driver for the OmniVision
- OV5645 camera.
-
- To compile this driver as a module, choose M here: the
- module will be called ov5645.
-
-config VIDEO_OV5647
- tristate "OmniVision OV5647 sensor support"
- depends on I2C && VIDEO_DEV
- select MEDIA_CONTROLLER
- select VIDEO_V4L2_SUBDEV_API
- select V4L2_FWNODE
- help
- This is a Video4Linux2 sensor driver for the OmniVision
- OV5647 camera.
-
- To compile this driver as a module, choose M here: the
- module will be called ov5647.
-
-config VIDEO_OV5648
- tristate "OmniVision OV5648 sensor support"
- depends on I2C && PM && VIDEO_DEV
- select MEDIA_CONTROLLER
- select VIDEO_V4L2_SUBDEV_API
- select V4L2_FWNODE
- help
- This is a Video4Linux2 sensor driver for the OmniVision
- OV5648 camera.
-
- To compile this driver as a module, choose M here: the
- module will be called ov5648.
-
-config VIDEO_OV5670
- tristate "OmniVision OV5670 sensor support"
- depends on I2C && VIDEO_DEV
- select MEDIA_CONTROLLER
- select VIDEO_V4L2_SUBDEV_API
- select V4L2_FWNODE
- help
- This is a Video4Linux2 sensor driver for the OmniVision
- OV5670 camera.
-
- To compile this driver as a module, choose M here: the
- module will be called ov5670.
-
-config VIDEO_OV5675
- tristate "OmniVision OV5675 sensor support"
- depends on I2C && VIDEO_DEV
- select MEDIA_CONTROLLER
- select VIDEO_V4L2_SUBDEV_API
- select V4L2_FWNODE
- help
- This is a Video4Linux2 sensor driver for the OmniVision
- OV5675 camera.
-
- To compile this driver as a module, choose M here: the
- module will be called ov5675.
-
-config VIDEO_OV5693
- tristate "OmniVision OV5693 sensor support"
- depends on I2C && VIDEO_DEV
- select V4L2_FWNODE
- help
- This is a Video4Linux2 sensor driver for the OmniVision
- OV5693 camera.
-
- To compile this driver as a module, choose M here: the
- module will be called ov5693.
-
-config VIDEO_OV5695
- tristate "OmniVision OV5695 sensor support"
- depends on I2C && VIDEO_DEV
- select V4L2_FWNODE
- help
- This is a Video4Linux2 sensor driver for the OmniVision
- OV5695 camera.
-
- To compile this driver as a module, choose M here: the
- module will be called ov5695.
-
-config VIDEO_OV6650
- tristate "OmniVision OV6650 sensor support"
- depends on I2C && VIDEO_DEV
- help
- This is a Video4Linux2 sensor driver for the OmniVision
- OV6650 camera.
-
- To compile this driver as a module, choose M here: the
- module will be called ov6650.
-
-config VIDEO_OV7251
- tristate "OmniVision OV7251 sensor support"
- depends on I2C && VIDEO_DEV
- select MEDIA_CONTROLLER
- select VIDEO_V4L2_SUBDEV_API
- select V4L2_FWNODE
- help
- This is a Video4Linux2 sensor driver for the OmniVision
- OV7251 camera.
-
- To compile this driver as a module, choose M here: the
- module will be called ov7251.
-
-config VIDEO_OV7640
- tristate "OmniVision OV7640 sensor support"
- depends on I2C && VIDEO_DEV
- help
- This is a Video4Linux2 sensor driver for the OmniVision
- OV7640 camera.
-
- To compile this driver as a module, choose M here: the
- module will be called ov7640.
-
-config VIDEO_OV7670
- tristate "OmniVision OV7670 sensor support"
- depends on I2C && VIDEO_DEV
- select V4L2_FWNODE
- help
- This is a Video4Linux2 sensor driver for the OmniVision
- OV7670 VGA camera. It currently only works with the M88ALP01
- controller.
-
-config VIDEO_OV772X
- tristate "OmniVision OV772x sensor support"
- depends on I2C && VIDEO_DEV
- select REGMAP_SCCB
- select V4L2_FWNODE
- help
- This is a Video4Linux2 sensor driver for the OmniVision
- OV772x camera.
-
- To compile this driver as a module, choose M here: the
- module will be called ov772x.
-
-config VIDEO_OV7740
- tristate "OmniVision OV7740 sensor support"
- depends on I2C && VIDEO_DEV
- select REGMAP_SCCB
- help
- This is a Video4Linux2 sensor driver for the OmniVision
- OV7740 VGA camera sensor.
-
-config VIDEO_OV8856
- tristate "OmniVision OV8856 sensor support"
- depends on I2C && VIDEO_DEV
- select MEDIA_CONTROLLER
- select VIDEO_V4L2_SUBDEV_API
- select V4L2_FWNODE
- help
- This is a Video4Linux2 sensor driver for the OmniVision
- OV8856 camera sensor.
-
- To compile this driver as a module, choose M here: the
- module will be called ov8856.
-
-config VIDEO_OV8865
- tristate "OmniVision OV8865 sensor support"
- depends on I2C && PM && VIDEO_DEV
- select MEDIA_CONTROLLER
- select VIDEO_V4L2_SUBDEV_API
- select V4L2_FWNODE
- help
- This is a Video4Linux2 sensor driver for OmniVision
- OV8865 camera sensor.
-
- To compile this driver as a module, choose M here: the
- module will be called ov8865.
-
-config VIDEO_OV9282
- tristate "OmniVision OV9282 sensor support"
- depends on OF_GPIO
- depends on I2C && VIDEO_DEV
- select VIDEO_V4L2_SUBDEV_API
- select MEDIA_CONTROLLER
- select V4L2_FWNODE
- help
- This is a Video4Linux2 sensor driver for the OmniVision
- OV9282 camera sensor.
-
- To compile this driver as a module, choose M here: the
- module will be called ov9282.
-
-config VIDEO_OV9640
- tristate "OmniVision OV9640 sensor support"
- depends on I2C && VIDEO_DEV
- help
- This is a Video4Linux2 sensor driver for the OmniVision
- OV9640 camera sensor.
-
-config VIDEO_OV9650
- tristate "OmniVision OV9650/OV9652 sensor support"
- depends on I2C && VIDEO_DEV
- select MEDIA_CONTROLLER
- select VIDEO_V4L2_SUBDEV_API
- select REGMAP_SCCB
- help
- This is a V4L2 sensor driver for the Omnivision
- OV9650 and OV9652 camera sensors.
-
-config VIDEO_OV9734
- tristate "OmniVision OV9734 sensor support"
- depends on VIDEO_DEV && I2C
- depends on ACPI || COMPILE_TEST
- select MEDIA_CONTROLLER
- select VIDEO_V4L2_SUBDEV_API
- select V4L2_FWNODE
- help
- This is a Video4Linux2 sensor driver for the OmniVision
- OV9734 camera.
-
- To compile this driver as a module, choose M here: the
- module's name is ov9734.
-
-config VIDEO_RDACM20
- tristate "IMI RDACM20 camera support"
- depends on I2C
- select V4L2_FWNODE
- select VIDEO_V4L2_SUBDEV_API
- select MEDIA_CONTROLLER
- select VIDEO_MAX9271_LIB
- help
- This driver supports the IMI RDACM20 GMSL camera, used in
- ADAS systems.
-
- This camera should be used in conjunction with a GMSL
- deserialiser such as the MAX9286.
-
-config VIDEO_RDACM21
- tristate "IMI RDACM21 camera support"
- depends on I2C
- select V4L2_FWNODE
- select VIDEO_V4L2_SUBDEV_API
- select MEDIA_CONTROLLER
- select VIDEO_MAX9271_LIB
- help
- This driver supports the IMI RDACM21 GMSL camera, used in
- ADAS systems.
-
- This camera should be used in conjunction with a GMSL
- deserialiser such as the MAX9286.
-
-config VIDEO_RJ54N1
- tristate "Sharp RJ54N1CB0C sensor support"
- depends on I2C && VIDEO_DEV
- help
- This is a V4L2 sensor driver for Sharp RJ54N1CB0C CMOS image
- sensor.
-
- To compile this driver as a module, choose M here: the
- module will be called rj54n1.
-
-config VIDEO_S5C73M3
- tristate "Samsung S5C73M3 sensor support"
- depends on I2C && SPI && VIDEO_DEV
- select MEDIA_CONTROLLER
- select VIDEO_V4L2_SUBDEV_API
- select V4L2_FWNODE
- help
- This is a V4L2 sensor driver for Samsung S5C73M3
- 8 Mpixel camera.
-
-config VIDEO_S5K4ECGX
- tristate "Samsung S5K4ECGX sensor support"
- depends on I2C && VIDEO_DEV
- select MEDIA_CONTROLLER
- select VIDEO_V4L2_SUBDEV_API
- select CRC32
- help
- This is a V4L2 sensor driver for Samsung S5K4ECGX 5M
- camera sensor with an embedded SoC image signal processor.
-
-config VIDEO_S5K5BAF
- tristate "Samsung S5K5BAF sensor support"
- depends on I2C && VIDEO_DEV
- select MEDIA_CONTROLLER
- select VIDEO_V4L2_SUBDEV_API
- select V4L2_FWNODE
- help
- This is a V4L2 sensor driver for Samsung S5K5BAF 2M
- camera sensor with an embedded SoC image signal processor.
-
-config VIDEO_S5K6A3
- tristate "Samsung S5K6A3 sensor support"
- depends on I2C && VIDEO_DEV
- select MEDIA_CONTROLLER
- select VIDEO_V4L2_SUBDEV_API
- help
- This is a V4L2 sensor driver for Samsung S5K6A3 raw
- camera sensor.
-
-config VIDEO_S5K6AA
- tristate "Samsung S5K6AAFX sensor support"
- depends on I2C && VIDEO_DEV
- select MEDIA_CONTROLLER
- select VIDEO_V4L2_SUBDEV_API
- help
- This is a V4L2 sensor driver for Samsung S5K6AA(FX) 1.3M
- camera sensor with an embedded SoC image signal processor.
-
-config VIDEO_SR030PC30
- tristate "Siliconfile SR030PC30 sensor support"
- depends on I2C && VIDEO_DEV
- help
- This driver supports SR030PC30 VGA camera from Siliconfile
-
-config VIDEO_VS6624
- tristate "ST VS6624 sensor support"
- depends on VIDEO_DEV && I2C
- help
- This is a Video4Linux2 sensor driver for the ST VS6624
- camera.
-
- To compile this driver as a module, choose M here: the
- module will be called vs6624.
-
-source "drivers/media/i2c/ccs/Kconfig"
-source "drivers/media/i2c/et8ek8/Kconfig"
-source "drivers/media/i2c/m5mols/Kconfig"
-
-endmenu
-
-menu "Lens drivers"
- visible if MEDIA_CAMERA_SUPPORT
-
-config VIDEO_AD5820
- tristate "AD5820 lens voice coil support"
- depends on GPIOLIB && I2C && VIDEO_DEV
- select MEDIA_CONTROLLER
- select V4L2_ASYNC
- help
- This is a driver for the AD5820 camera lens voice coil.
- It is used for example in Nokia N900 (RX-51).
-
-config VIDEO_AK7375
- tristate "AK7375 lens voice coil support"
- depends on I2C && VIDEO_DEV
- select MEDIA_CONTROLLER
- select VIDEO_V4L2_SUBDEV_API
- select V4L2_ASYNC
- help
- This is a driver for the AK7375 camera lens voice coil.
- AK7375 is a 12 bit DAC with 120mA output current sink
- capability. This is designed for linear control of
- voice coil motors, controlled via I2C serial interface.
-
-config VIDEO_DW9714
- tristate "DW9714 lens voice coil support"
- depends on I2C && VIDEO_DEV
- select MEDIA_CONTROLLER
- select VIDEO_V4L2_SUBDEV_API
- select V4L2_ASYNC
- help
- This is a driver for the DW9714 camera lens voice coil.
- DW9714 is a 10 bit DAC with 120mA output current sink
- capability. This is designed for linear control of
- voice coil motors, controlled via I2C serial interface.
-
-config VIDEO_DW9768
- tristate "DW9768 lens voice coil support"
- depends on I2C && VIDEO_DEV
- select MEDIA_CONTROLLER
- select VIDEO_V4L2_SUBDEV_API
- select V4L2_FWNODE
- help
- This is a driver for the DW9768 camera lens voice coil.
- DW9768 is a 10 bit DAC with 100mA output current sink
- capability. This is designed for linear control of
- voice coil motors, controlled via I2C serial interface.
-
-config VIDEO_DW9807_VCM
- tristate "DW9807 lens voice coil support"
- depends on I2C && VIDEO_DEV
- select MEDIA_CONTROLLER
- select VIDEO_V4L2_SUBDEV_API
- select V4L2_ASYNC
- help
- This is a driver for the DW9807 camera lens voice coil.
- DW9807 is a 10 bit DAC with 100mA output current sink
- capability. This is designed for linear control of
- voice coil motors, controlled via I2C serial interface.
-
-endmenu
-
-menu "Flash devices"
- visible if MEDIA_CAMERA_SUPPORT
-
-config VIDEO_ADP1653
- tristate "ADP1653 flash support"
- depends on I2C && VIDEO_DEV
- select MEDIA_CONTROLLER
- select V4L2_ASYNC
- help
- This is a driver for the ADP1653 flash controller. It is used for
- example in Nokia N900.
-
-config VIDEO_LM3560
- tristate "LM3560 dual flash driver support"
- depends on I2C && VIDEO_DEV
- select MEDIA_CONTROLLER
- select REGMAP_I2C
- select V4L2_ASYNC
- help
- This is a driver for the lm3560 dual flash controllers. It controls
- flash, torch LEDs.
-
-config VIDEO_LM3646
- tristate "LM3646 dual flash driver support"
- depends on I2C && VIDEO_DEV
- select MEDIA_CONTROLLER
- select REGMAP_I2C
- select V4L2_ASYNC
- help
- This is a driver for the lm3646 dual flash controllers. It controls
- flash, torch LEDs.
-
-endmenu
-
endif # VIDEO_DEV
--
2.35.1
It makes no sense to have two menus for SPI drivers, each
one with a single driver. Merge them and keep the Kconfig
sorted.
Suggested-by: Hans Verkuil <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
---
drivers/media/spi/Kconfig | 26 +++++++++-----------------
1 file changed, 9 insertions(+), 17 deletions(-)
diff --git a/drivers/media/spi/Kconfig b/drivers/media/spi/Kconfig
index 01e4e6cce027..4656afae5bb4 100644
--- a/drivers/media/spi/Kconfig
+++ b/drivers/media/spi/Kconfig
@@ -1,25 +1,9 @@
# SPDX-License-Identifier: GPL-2.0-only
-if VIDEO_DEV
+if VIDEO_DEV && SPI
comment "SPI I2C drivers auto-selected by 'Autoselect ancillary drivers'"
depends on MEDIA_HIDE_ANCILLARY_SUBDRV && SPI
-menu "SPI helper chips"
- visible if !MEDIA_HIDE_ANCILLARY_SUBDRV
-
-config VIDEO_GS1662
- tristate "Gennum Serializers video"
- depends on SPI && VIDEO_DEV
- select MEDIA_CONTROLLER
- select VIDEO_V4L2_SUBDEV_API
- help
- Enable the GS1662 driver which serializes video streams.
-
-endmenu
-
-endif
-
-if SPI
menu "Media SPI Adapters"
config CXD2880_SPI_DRV
@@ -29,6 +13,14 @@ config CXD2880_SPI_DRV
help
Choose if you would like to have SPI interface support for Sony CXD2880.
+config VIDEO_GS1662
+ tristate "Gennum Serializers video"
+ depends on SPI && VIDEO_DEV
+ select MEDIA_CONTROLLER
+ select VIDEO_V4L2_SUBDEV_API
+ help
+ Enable the GS1662 driver which serializes video streams.
+
endmenu
endif
--
2.35.1