2021-02-25 21:34:42

by Konrad Dybcio

[permalink] [raw]
Subject: [PATCH] thermal: qcom: tsens_v1: Enable sensor 3 on MSM8976

The sensor *is* in fact used and does report temperature.

Signed-off-by: Konrad Dybcio <[email protected]>
---
drivers/thermal/qcom/tsens-v1.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/thermal/qcom/tsens-v1.c b/drivers/thermal/qcom/tsens-v1.c
index 3c19a3800c6d..573e261ccca7 100644
--- a/drivers/thermal/qcom/tsens-v1.c
+++ b/drivers/thermal/qcom/tsens-v1.c
@@ -380,11 +380,11 @@ static const struct tsens_ops ops_8976 = {
.get_temp = get_temp_tsens_valid,
};

-/* Valid for both MSM8956 and MSM8976. Sensor ID 3 is unused. */
+/* Valid for both MSM8956 and MSM8976. */
struct tsens_plat_data data_8976 = {
.num_sensors = 11,
.ops = &ops_8976,
- .hw_ids = (unsigned int[]){0, 1, 2, 4, 5, 6, 7, 8, 9, 10},
+ .hw_ids = (unsigned int[]){0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10},
.feat = &tsens_v1_feat,
.fields = tsens_v1_regfields,
};
--
2.30.1


2021-03-17 18:27:59

by Thara Gopinath

[permalink] [raw]
Subject: Re: [PATCH] thermal: qcom: tsens_v1: Enable sensor 3 on MSM8976



On 2/25/21 4:31 PM, Konrad Dybcio wrote:
> The sensor *is* in fact used and does report temperature.

I can't find any info that says otherwise. So,

Acked-by: Thara Gopinath <[email protected]>

Warm Regards
Thara

>
> Signed-off-by: Konrad Dybcio <[email protected]>
> ---
> drivers/thermal/qcom/tsens-v1.c | 4 ++--
> 1 file changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/thermal/qcom/tsens-v1.c b/drivers/thermal/qcom/tsens-v1.c
> index 3c19a3800c6d..573e261ccca7 100644
> --- a/drivers/thermal/qcom/tsens-v1.c
> +++ b/drivers/thermal/qcom/tsens-v1.c
> @@ -380,11 +380,11 @@ static const struct tsens_ops ops_8976 = {
> .get_temp = get_temp_tsens_valid,
> };
>
> -/* Valid for both MSM8956 and MSM8976. Sensor ID 3 is unused. */
> +/* Valid for both MSM8956 and MSM8976. */
> struct tsens_plat_data data_8976 = {
> .num_sensors = 11,
> .ops = &ops_8976,
> - .hw_ids = (unsigned int[]){0, 1, 2, 4, 5, 6, 7, 8, 9, 10},
> + .hw_ids = (unsigned int[]){0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10},
> .feat = &tsens_v1_feat,
> .fields = tsens_v1_regfields,
> };
>

--
Warm Regards
Thara