There is a compiling error in disp.c while not selecting
CONFIG_DRM_NOUVEAU_BACKLIGHT:
drivers/gpu/drm/nouveau/dispnv50/disp.c: In function ‘nv50_sor_atomic_disable’:
drivers/gpu/drm/nouveau/dispnv50/disp.c:1665:52: error:
‘struct nouveau_connector’ has no member named ‘backlight’
1665 | struct nouveau_backlight *backlight = nv_connector->backlight;
| ^~
drivers/gpu/drm/nouveau/dispnv50/disp.c:1670:28: error: dereferencing pointer
to incomplete type ‘struct nouveau_backlight’
1670 | if (backlight && backlight->uses_dpcd) {
| ^~
The problem is solved by adding the CONFIG_DRM_NOUVEAU_BACKLIGHT dependency
where struct nouveau_backlight is used.
Signed-off-by: Chen Jiahao <[email protected]>
---
drivers/gpu/drm/nouveau/dispnv50/disp.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/drivers/gpu/drm/nouveau/dispnv50/disp.c b/drivers/gpu/drm/nouveau/dispnv50/disp.c
index 093e1f7163b3..d266b7721e29 100644
--- a/drivers/gpu/drm/nouveau/dispnv50/disp.c
+++ b/drivers/gpu/drm/nouveau/dispnv50/disp.c
@@ -1662,17 +1662,21 @@ nv50_sor_atomic_disable(struct drm_encoder *encoder, struct drm_atomic_state *st
struct nouveau_drm *drm = nouveau_drm(nv_encoder->base.base.dev);
struct nouveau_crtc *nv_crtc = nouveau_crtc(nv_encoder->crtc);
struct nouveau_connector *nv_connector = nv50_outp_get_old_connector(state, nv_encoder);
+#ifdef CONFIG_DRM_NOUVEAU_BACKLIGHT
struct nouveau_backlight *backlight = nv_connector->backlight;
+#endif
struct drm_dp_aux *aux = &nv_connector->aux;
int ret;
u8 pwr;
+#ifdef CONFIG_DRM_NOUVEAU_BACKLIGHT
if (backlight && backlight->uses_dpcd) {
ret = drm_edp_backlight_disable(aux, &backlight->edp_info);
if (ret < 0)
NV_ERROR(drm, "Failed to disable backlight on [CONNECTOR:%d:%s]: %d\n",
nv_connector->base.base.id, nv_connector->base.name, ret);
}
+#endif
if (nv_encoder->dcb->type == DCB_OUTPUT_DP) {
int ret = drm_dp_dpcd_readb(aux, DP_SET_POWER, &pwr);
--
2.31.1
This needs a fixes tag:
Fixes: 6eca310e8924 ("drm/nouveau/kms/nv50-: Add basic DPCD backlight support for nouveau")
with that fixed:
Reviewed-by: Lyude Paul <[email protected]>
On Tue, 2021-06-15 at 11:16 +0800, Chen Jiahao wrote:
> There is a compiling error in disp.c while not selecting
> CONFIG_DRM_NOUVEAU_BACKLIGHT:
>
> drivers/gpu/drm/nouveau/dispnv50/disp.c: In function
> ‘nv50_sor_atomic_disable’:
> drivers/gpu/drm/nouveau/dispnv50/disp.c:1665:52: error:
> ‘struct nouveau_connector’ has no member named ‘backlight’
> 1665 | struct nouveau_backlight *backlight = nv_connector->backlight;
> | ^~
> drivers/gpu/drm/nouveau/dispnv50/disp.c:1670:28: error: dereferencing
> pointer
> to incomplete type ‘struct nouveau_backlight’
> 1670 | if (backlight && backlight->uses_dpcd) {
> | ^~
>
> The problem is solved by adding the CONFIG_DRM_NOUVEAU_BACKLIGHT dependency
> where struct nouveau_backlight is used.
>
> Signed-off-by: Chen Jiahao <[email protected]>
> ---
> drivers/gpu/drm/nouveau/dispnv50/disp.c | 4 ++++
> 1 file changed, 4 insertions(+)
>
> diff --git a/drivers/gpu/drm/nouveau/dispnv50/disp.c
> b/drivers/gpu/drm/nouveau/dispnv50/disp.c
> index 093e1f7163b3..d266b7721e29 100644
> --- a/drivers/gpu/drm/nouveau/dispnv50/disp.c
> +++ b/drivers/gpu/drm/nouveau/dispnv50/disp.c
> @@ -1662,17 +1662,21 @@ nv50_sor_atomic_disable(struct drm_encoder *encoder,
> struct drm_atomic_state *st
> struct nouveau_drm *drm = nouveau_drm(nv_encoder->base.base.dev);
> struct nouveau_crtc *nv_crtc = nouveau_crtc(nv_encoder->crtc);
> struct nouveau_connector *nv_connector =
> nv50_outp_get_old_connector(state, nv_encoder);
> +#ifdef CONFIG_DRM_NOUVEAU_BACKLIGHT
> struct nouveau_backlight *backlight = nv_connector->backlight;
> +#endif
> struct drm_dp_aux *aux = &nv_connector->aux;
> int ret;
> u8 pwr;
>
> +#ifdef CONFIG_DRM_NOUVEAU_BACKLIGHT
> if (backlight && backlight->uses_dpcd) {
> ret = drm_edp_backlight_disable(aux, &backlight->edp_info);
> if (ret < 0)
> NV_ERROR(drm, "Failed to disable backlight on
> [CONNECTOR:%d:%s]: %d\n",
> nv_connector->base.base.id, nv_connector-
> >base.name, ret);
> }
> +#endif
>
> if (nv_encoder->dcb->type == DCB_OUTPUT_DP) {
> int ret = drm_dp_dpcd_readb(aux, DP_SET_POWER, &pwr);
--
Cheers,
Lyude Paul (she/her)
Software Engineer at Red Hat