This is the start of the stable review cycle for the 4.9.273 release.
There are 42 patches in this series, all will be posted as a response
to this one. If anyone has any issues with these being applied, please
let me know.
Responses should be made by Wed, 16 Jun 2021 10:26:30 +0000.
Anything received after that time might be too late.
The whole patch series can be found in one patch at:
https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.9.273-rc1.gz
or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.9.y
and the diffstat can be found below.
thanks,
greg k-h
-------------
Pseudo-Shortlog of commits:
Greg Kroah-Hartman <[email protected]>
Linux 4.9.273-rc1
Liangyan <[email protected]>
tracing: Correct the length check which causes memory corruption
Steven Rostedt (VMware) <[email protected]>
ftrace: Do not blindly read the ip address in ftrace_bug()
Ming Lei <[email protected]>
scsi: core: Only put parent device if host state differs from SHOST_CREATED
Ming Lei <[email protected]>
scsi: core: Fix error handling of scsi_host_alloc()
Dai Ngo <[email protected]>
NFSv4: nfs4_proc_set_acl needs to restore NFS_CAP_UIDGID_NOMAP on error.
Paolo Bonzini <[email protected]>
kvm: fix previous commit for 32-bit builds
Leo Yan <[email protected]>
perf session: Correct buffer copying when peeking events
Dan Carpenter <[email protected]>
NFS: Fix a potential NULL dereference in nfs_get_client()
Marco Elver <[email protected]>
perf: Fix data race between pin_count increment/decrement
Dmitry Baryshkov <[email protected]>
regulator: core: resolve supply for boot-on/always-on regulators
Maciej Żenczykowski <[email protected]>
usb: fix various gadget panics on 10gbps cabling
Maciej Żenczykowski <[email protected]>
usb: fix various gadgets null ptr deref on 10gbps cabling.
Linyu Yuan <[email protected]>
usb: gadget: eem: fix wrong eem header operation
Johan Hovold <[email protected]>
USB: serial: quatech2: fix control-request directions
Alexandre GRIVEAUX <[email protected]>
USB: serial: omninet: add device id for Zyxel Omni 56K Plus
George McCollister <[email protected]>
USB: serial: ftdi_sio: add NovaTech OrionMX product ID
Marian-Cristian Rotariu <[email protected]>
usb: dwc3: ep0: fix NULL pointer exception
Maciej Żenczykowski <[email protected]>
USB: f_ncm: ncm_bitrate (speed) is unsigned
Alexander Kuznetsov <[email protected]>
cgroup1: don't allow '\n' in renaming
Ritesh Harjani <[email protected]>
btrfs: return value from btrfs_mark_extent_written() in case of error
Paolo Bonzini <[email protected]>
kvm: avoid speculation-based attacks from out-of-range memslot accesses
Desmond Cheong Zhi Xi <[email protected]>
drm: Lock pointer access in drm_master_release()
Chris Packham <[email protected]>
i2c: mpc: implement erratum A-004447 workaround
Chris Packham <[email protected]>
i2c: mpc: Make use of i2c_recover_bus()
Chris Packham <[email protected]>
powerpc/fsl: set fsl,i2c-erratum-a004447 flag for P1010 i2c controllers
Chris Packham <[email protected]>
powerpc/fsl: set fsl,i2c-erratum-a004447 flag for P2041 i2c controllers
Jiapeng Chong <[email protected]>
bnx2x: Fix missing error code in bnx2x_iov_init_one()
Tiezhu Yang <[email protected]>
MIPS: Fix kernel hang under FUNCTION_GRAPH_TRACER and PREEMPT_TRACER
Saubhik Mukherjee <[email protected]>
net: appletalk: cops: Fix data race in cops_probe1
Zong Li <[email protected]>
net: macb: ensure the device is available before accessing GEMGXL control registers
Dmitry Bogdanov <[email protected]>
scsi: target: qla2xxx: Wait for stop_phase1 at WWN removal
Matt Wang <[email protected]>
scsi: vmw_pvscsi: Set correct residual data length
Zheyu Ma <[email protected]>
net/qla3xxx: fix schedule while atomic in ql_sem_spinlock
Sergey Senozhatsky <[email protected]>
wq: handle VM suspension in stall detection
Shakeel Butt <[email protected]>
cgroup: disable controllers at parse time
Dan Carpenter <[email protected]>
net: mdiobus: get rid of a BUG_ON()
Johannes Berg <[email protected]>
netlink: disable IRQs for netlink_lock_table()
Johannes Berg <[email protected]>
bonding: init notify_work earlier to avoid uninitialized use
Zheyu Ma <[email protected]>
isdn: mISDN: netjet: Fix crash in nj_probe:
Zou Wei <[email protected]>
ASoC: sti-sas: add missing MODULE_DEVICE_TABLE
Jeimon <[email protected]>
net/nfc/rawsock.c: fix a permission check bug
Kees Cook <[email protected]>
proc: Track /proc/$pid/attr/ opener mm_struct
-------------
Diffstat:
Makefile | 4 +-
arch/mips/lib/mips-atomic.c | 12 +--
arch/powerpc/boot/dts/fsl/p1010si-post.dtsi | 8 ++
arch/powerpc/boot/dts/fsl/p2041si-post.dtsi | 16 ++++
drivers/gpu/drm/drm_auth.c | 3 +-
drivers/i2c/busses/i2c-mpc.c | 95 ++++++++++++++++++++++-
drivers/isdn/hardware/mISDN/netjet.c | 1 -
drivers/net/appletalk/cops.c | 4 +-
drivers/net/bonding/bond_main.c | 2 +-
drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c | 4 +-
drivers/net/ethernet/cadence/macb.c | 3 +
drivers/net/ethernet/qlogic/qla3xxx.c | 2 +-
drivers/net/phy/mdio_bus.c | 3 +-
drivers/regulator/core.c | 6 ++
drivers/scsi/hosts.c | 25 +++---
drivers/scsi/qla2xxx/qla_target.c | 2 +
drivers/scsi/vmw_pvscsi.c | 8 +-
drivers/usb/dwc3/ep0.c | 3 +
drivers/usb/gadget/config.c | 8 ++
drivers/usb/gadget/function/f_ecm.c | 2 +-
drivers/usb/gadget/function/f_eem.c | 6 +-
drivers/usb/gadget/function/f_loopback.c | 2 +-
drivers/usb/gadget/function/f_ncm.c | 2 +-
drivers/usb/gadget/function/f_printer.c | 3 +-
drivers/usb/gadget/function/f_rndis.c | 2 +-
drivers/usb/gadget/function/f_serial.c | 2 +-
drivers/usb/gadget/function/f_sourcesink.c | 3 +-
drivers/usb/gadget/function/f_subset.c | 2 +-
drivers/usb/gadget/function/f_tcm.c | 3 +-
drivers/usb/serial/ftdi_sio.c | 1 +
drivers/usb/serial/ftdi_sio_ids.h | 1 +
drivers/usb/serial/omninet.c | 2 +
drivers/usb/serial/quatech2.c | 6 +-
fs/btrfs/file.c | 4 +-
fs/nfs/client.c | 2 +-
fs/nfs/nfs4proc.c | 8 ++
fs/proc/base.c | 9 ++-
include/linux/kvm_host.h | 11 ++-
kernel/cgroup.c | 17 ++--
kernel/events/core.c | 2 +
kernel/trace/ftrace.c | 8 +-
kernel/trace/trace.c | 2 +-
kernel/workqueue.c | 12 ++-
net/netlink/af_netlink.c | 6 +-
net/nfc/rawsock.c | 2 +-
sound/soc/codecs/sti-sas.c | 1 +
tools/perf/util/session.c | 1 +
47 files changed, 266 insertions(+), 65 deletions(-)
From: Chris Packham <[email protected]>
[ Upstream commit 7adc7b225cddcfd0f346d10144fd7a3d3d9f9ea7 ]
The i2c controllers on the P2040/P2041 have an erratum where the
documented scheme for i2c bus recovery will not work (A-004447). A
different mechanism is needed which is documented in the P2040 Chip
Errata Rev Q (latest available at the time of writing).
Signed-off-by: Chris Packham <[email protected]>
Acked-by: Michael Ellerman <[email protected]>
Signed-off-by: Wolfram Sang <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/powerpc/boot/dts/fsl/p2041si-post.dtsi | 16 ++++++++++++++++
1 file changed, 16 insertions(+)
diff --git a/arch/powerpc/boot/dts/fsl/p2041si-post.dtsi b/arch/powerpc/boot/dts/fsl/p2041si-post.dtsi
index 51e975d7631a..8921f17fca42 100644
--- a/arch/powerpc/boot/dts/fsl/p2041si-post.dtsi
+++ b/arch/powerpc/boot/dts/fsl/p2041si-post.dtsi
@@ -389,7 +389,23 @@
};
/include/ "qoriq-i2c-0.dtsi"
+ i2c@118000 {
+ fsl,i2c-erratum-a004447;
+ };
+
+ i2c@118100 {
+ fsl,i2c-erratum-a004447;
+ };
+
/include/ "qoriq-i2c-1.dtsi"
+ i2c@119000 {
+ fsl,i2c-erratum-a004447;
+ };
+
+ i2c@119100 {
+ fsl,i2c-erratum-a004447;
+ };
+
/include/ "qoriq-duart-0.dtsi"
/include/ "qoriq-duart-1.dtsi"
/include/ "qoriq-gpio-0.dtsi"
--
2.30.2
From: Ritesh Harjani <[email protected]>
commit e7b2ec3d3d4ebeb4cff7ae45cf430182fa6a49fb upstream.
We always return 0 even in case of an error in btrfs_mark_extent_written().
Fix it to return proper error value in case of a failure. All callers
handle it.
CC: [email protected] # 4.4+
Signed-off-by: Ritesh Harjani <[email protected]>
Reviewed-by: David Sterba <[email protected]>
Signed-off-by: David Sterba <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/btrfs/file.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/fs/btrfs/file.c
+++ b/fs/btrfs/file.c
@@ -1089,7 +1089,7 @@ int btrfs_mark_extent_written(struct btr
int del_nr = 0;
int del_slot = 0;
int recow;
- int ret;
+ int ret = 0;
u64 ino = btrfs_ino(inode);
path = btrfs_alloc_path();
@@ -1309,7 +1309,7 @@ again:
}
out:
btrfs_free_path(path);
- return 0;
+ return ret;
}
/*
From: Zou Wei <[email protected]>
[ Upstream commit e072b2671606c77538d6a4dd5dda80b508cb4816 ]
This patch adds missing MODULE_DEVICE_TABLE definition which generates
correct modalias for automatic loading of this driver when it is built
as an external module.
Reported-by: Hulk Robot <[email protected]>
Signed-off-by: Zou Wei <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/soc/codecs/sti-sas.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/sound/soc/codecs/sti-sas.c b/sound/soc/codecs/sti-sas.c
index d6e00c77edcd..7cf76661c3cc 100644
--- a/sound/soc/codecs/sti-sas.c
+++ b/sound/soc/codecs/sti-sas.c
@@ -542,6 +542,7 @@ static const struct of_device_id sti_sas_dev_match[] = {
},
{},
};
+MODULE_DEVICE_TABLE(of, sti_sas_dev_match);
static int sti_sas_driver_probe(struct platform_device *pdev)
{
--
2.30.2
From: Desmond Cheong Zhi Xi <[email protected]>
commit c336a5ee984708db4826ef9e47d184e638e29717 upstream.
This patch eliminates the following smatch warning:
drivers/gpu/drm/drm_auth.c:320 drm_master_release() warn: unlocked access 'master' (line 318) expected lock '&dev->master_mutex'
The 'file_priv->master' field should be protected by the mutex lock to
'&dev->master_mutex'. This is because other processes can concurrently
modify this field and free the current 'file_priv->master'
pointer. This could result in a use-after-free error when 'master' is
dereferenced in subsequent function calls to
'drm_legacy_lock_master_cleanup()' or to 'drm_lease_revoke()'.
An example of a scenario that would produce this error can be seen
from a similar bug in 'drm_getunique()' that was reported by Syzbot:
https://syzkaller.appspot.com/bug?id=148d2f1dfac64af52ffd27b661981a540724f803
In the Syzbot report, another process concurrently acquired the
device's master mutex in 'drm_setmaster_ioctl()', then overwrote
'fpriv->master' in 'drm_new_set_master()'. The old value of
'fpriv->master' was subsequently freed before the mutex was unlocked.
Reported-by: Dan Carpenter <[email protected]>
Signed-off-by: Desmond Cheong Zhi Xi <[email protected]>
Cc: [email protected]
Signed-off-by: Daniel Vetter <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/gpu/drm/drm_auth.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/drivers/gpu/drm/drm_auth.c
+++ b/drivers/gpu/drm/drm_auth.c
@@ -244,9 +244,10 @@ int drm_master_open(struct drm_file *fil
void drm_master_release(struct drm_file *file_priv)
{
struct drm_device *dev = file_priv->minor->dev;
- struct drm_master *master = file_priv->master;
+ struct drm_master *master;
mutex_lock(&dev->master_mutex);
+ master = file_priv->master;
if (file_priv->magic)
idr_remove(&file_priv->master->magic_map, file_priv->magic);
From: Marian-Cristian Rotariu <[email protected]>
commit d00889080ab60051627dab1d85831cd9db750e2a upstream.
There is no validation of the index from dwc3_wIndex_to_dep() and we might
be referring a non-existing ep and trigger a NULL pointer exception. In
certain configurations we might use fewer eps and the index might wrongly
indicate a larger ep index than existing.
By adding this validation from the patch we can actually report a wrong
index back to the caller.
In our usecase we are using a composite device on an older kernel, but
upstream might use this fix also. Unfortunately, I cannot describe the
hardware for others to reproduce the issue as it is a proprietary
implementation.
[ 82.958261] Unable to handle kernel NULL pointer dereference at virtual address 00000000000000a4
[ 82.966891] Mem abort info:
[ 82.969663] ESR = 0x96000006
[ 82.972703] Exception class = DABT (current EL), IL = 32 bits
[ 82.978603] SET = 0, FnV = 0
[ 82.981642] EA = 0, S1PTW = 0
[ 82.984765] Data abort info:
[ 82.987631] ISV = 0, ISS = 0x00000006
[ 82.991449] CM = 0, WnR = 0
[ 82.994409] user pgtable: 4k pages, 39-bit VAs, pgdp = 00000000c6210ccc
[ 83.000999] [00000000000000a4] pgd=0000000053aa5003, pud=0000000053aa5003, pmd=0000000000000000
[ 83.009685] Internal error: Oops: 96000006 [#1] PREEMPT SMP
[ 83.026433] Process irq/62-dwc3 (pid: 303, stack limit = 0x000000003985154c)
[ 83.033470] CPU: 0 PID: 303 Comm: irq/62-dwc3 Not tainted 4.19.124 #1
[ 83.044836] pstate: 60000085 (nZCv daIf -PAN -UAO)
[ 83.049628] pc : dwc3_ep0_handle_feature+0x414/0x43c
[ 83.054558] lr : dwc3_ep0_interrupt+0x3b4/0xc94
...
[ 83.141788] Call trace:
[ 83.144227] dwc3_ep0_handle_feature+0x414/0x43c
[ 83.148823] dwc3_ep0_interrupt+0x3b4/0xc94
[ 83.181546] ---[ end trace aac6b5267d84c32f ]---
Signed-off-by: Marian-Cristian Rotariu <[email protected]>
Cc: stable <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/dwc3/ep0.c | 3 +++
1 file changed, 3 insertions(+)
--- a/drivers/usb/dwc3/ep0.c
+++ b/drivers/usb/dwc3/ep0.c
@@ -328,6 +328,9 @@ static struct dwc3_ep *dwc3_wIndex_to_de
epnum |= 1;
dep = dwc->eps[epnum];
+ if (dep == NULL)
+ return NULL;
+
if (dep->flags & DWC3_EP_ENABLED)
return dep;
From: Johannes Berg <[email protected]>
[ Upstream commit 35d96e631860226d5dc4de0fad0a415362ec2457 ]
If bond_kobj_init() or later kzalloc() in bond_alloc_slave() fail,
then we call kobject_put() on the slave->kobj. This in turn calls
the release function slave_kobj_release() which will always try to
cancel_delayed_work_sync(&slave->notify_work), which shouldn't be
done on an uninitialized work struct.
Always initialize the work struct earlier to avoid problems here.
Syzbot bisected this down to a completely pointless commit, some
fault injection may have been at work here that caused the alloc
failure in the first place, which may interact badly with bisect.
Reported-by: [email protected]
Signed-off-by: Johannes Berg <[email protected]>
Acked-by: Jay Vosburgh <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/bonding/bond_main.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c
index 16437aa35bc4..2b721ed392ad 100644
--- a/drivers/net/bonding/bond_main.c
+++ b/drivers/net/bonding/bond_main.c
@@ -1280,6 +1280,7 @@ static struct slave *bond_alloc_slave(struct bonding *bond,
slave->bond = bond;
slave->dev = slave_dev;
+ INIT_DELAYED_WORK(&slave->notify_work, bond_netdev_notify_work);
if (bond_kobj_init(slave))
return NULL;
@@ -1292,7 +1293,6 @@ static struct slave *bond_alloc_slave(struct bonding *bond,
return NULL;
}
}
- INIT_DELAYED_WORK(&slave->notify_work, bond_netdev_notify_work);
return slave;
}
--
2.30.2
From: Matt Wang <[email protected]>
[ Upstream commit e662502b3a782d479e67736a5a1c169a703d853a ]
Some commands (such as INQUIRY) may return less data than the initiator
requested. To avoid conducting useless information, set the right residual
count to make upper layer aware of this.
Before (INQUIRY PAGE 0xB0 with 128B buffer):
$ sg_raw -r 128 /dev/sda 12 01 B0 00 80 00
SCSI Status: Good
Received 128 bytes of data:
00 00 b0 00 3c 01 00 00 00 00 00 00 00 00 00 00 00 ...<............
10 00 00 00 00 00 01 00 00 00 00 00 40 00 00 08 00 ...........@....
20 80 00 00 00 00 00 00 00 00 00 20 00 00 00 00 00 .......... .....
30 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
40 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
50 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
60 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
70 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
After:
$ sg_raw -r 128 /dev/sda 12 01 B0 00 80 00
SCSI Status: Good
Received 64 bytes of data:
00 00 b0 00 3c 01 00 00 00 00 00 00 00 00 00 00 00 ...<............
10 00 00 00 00 00 01 00 00 00 00 00 40 00 00 08 00 ...........@....
20 80 00 00 00 00 00 00 00 00 00 20 00 00 00 00 00 .......... .....
30 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
[mkp: clarified description]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Matt Wang <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/scsi/vmw_pvscsi.c | 8 +++++++-
1 file changed, 7 insertions(+), 1 deletion(-)
diff --git a/drivers/scsi/vmw_pvscsi.c b/drivers/scsi/vmw_pvscsi.c
index df6fabcce4f7..4d2172c115c6 100644
--- a/drivers/scsi/vmw_pvscsi.c
+++ b/drivers/scsi/vmw_pvscsi.c
@@ -577,7 +577,13 @@ static void pvscsi_complete_request(struct pvscsi_adapter *adapter,
case BTSTAT_SUCCESS:
case BTSTAT_LINKED_COMMAND_COMPLETED:
case BTSTAT_LINKED_COMMAND_COMPLETED_WITH_FLAG:
- /* If everything went fine, let's move on.. */
+ /*
+ * Commands like INQUIRY may transfer less data than
+ * requested by the initiator via bufflen. Set residual
+ * count to make upper layer aware of the actual amount
+ * of data returned.
+ */
+ scsi_set_resid(cmd, scsi_bufflen(cmd) - e->dataLen);
cmd->result = (DID_OK << 16);
break;
--
2.30.2
From: Saubhik Mukherjee <[email protected]>
[ Upstream commit a4dd4fc6105e54393d637450a11d4cddb5fabc4f ]
In cops_probe1(), there is a write to dev->base_addr after requesting an
interrupt line and registering the interrupt handler cops_interrupt().
The handler might be called in parallel to handle an interrupt.
cops_interrupt() tries to read dev->base_addr leading to a potential
data race. So write to dev->base_addr before calling request_irq().
Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: Saubhik Mukherjee <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/appletalk/cops.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/net/appletalk/cops.c b/drivers/net/appletalk/cops.c
index 1b2e9217ec78..d520ce32ddbf 100644
--- a/drivers/net/appletalk/cops.c
+++ b/drivers/net/appletalk/cops.c
@@ -324,6 +324,8 @@ static int __init cops_probe1(struct net_device *dev, int ioaddr)
break;
}
+ dev->base_addr = ioaddr;
+
/* Reserve any actual interrupt. */
if (dev->irq) {
retval = request_irq(dev->irq, cops_interrupt, 0, dev->name, dev);
@@ -331,8 +333,6 @@ static int __init cops_probe1(struct net_device *dev, int ioaddr)
goto err_out;
}
- dev->base_addr = ioaddr;
-
lp = netdev_priv(dev);
spin_lock_init(&lp->lock);
--
2.30.2
From: Johan Hovold <[email protected]>
commit eb8dbe80326c3d44c1e38ee4f40e0d8d3e06f2d0 upstream.
The direction of the pipe argument must match the request-type direction
bit or control requests may fail depending on the host-controller-driver
implementation.
Fix the three requests which erroneously used usb_rcvctrlpipe().
Fixes: f7a33e608d9a ("USB: serial: add quatech2 usb to serial driver")
Cc: [email protected] # 3.5
Signed-off-by: Johan Hovold <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/serial/quatech2.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
--- a/drivers/usb/serial/quatech2.c
+++ b/drivers/usb/serial/quatech2.c
@@ -419,7 +419,7 @@ static void qt2_close(struct usb_serial_
/* flush the port transmit buffer */
i = usb_control_msg(serial->dev,
- usb_rcvctrlpipe(serial->dev, 0),
+ usb_sndctrlpipe(serial->dev, 0),
QT2_FLUSH_DEVICE, 0x40, 1,
port_priv->device_port, NULL, 0, QT2_USB_TIMEOUT);
@@ -429,7 +429,7 @@ static void qt2_close(struct usb_serial_
/* flush the port receive buffer */
i = usb_control_msg(serial->dev,
- usb_rcvctrlpipe(serial->dev, 0),
+ usb_sndctrlpipe(serial->dev, 0),
QT2_FLUSH_DEVICE, 0x40, 0,
port_priv->device_port, NULL, 0, QT2_USB_TIMEOUT);
@@ -701,7 +701,7 @@ static int qt2_attach(struct usb_serial
int status;
/* power on unit */
- status = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0),
+ status = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
0xc2, 0x40, 0x8000, 0, NULL, 0,
QT2_USB_TIMEOUT);
if (status < 0) {
From: Zheyu Ma <[email protected]>
[ Upstream commit 9f6f852550d0e1b7735651228116ae9d300f69b3 ]
'nj_setup' in netjet.c might fail with -EIO and in this case
'card->irq' is initialized and is bigger than zero. A subsequent call to
'nj_release' will free the irq that has not been requested.
Fix this bug by deleting the previous assignment to 'card->irq' and just
keep the assignment before 'request_irq'.
The KASAN's log reveals it:
[ 3.354615 ] WARNING: CPU: 0 PID: 1 at kernel/irq/manage.c:1826
free_irq+0x100/0x480
[ 3.355112 ] Modules linked in:
[ 3.355310 ] CPU: 0 PID: 1 Comm: swapper/0 Not tainted
5.13.0-rc1-00144-g25a1298726e #13
[ 3.355816 ] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS
rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014
[ 3.356552 ] RIP: 0010:free_irq+0x100/0x480
[ 3.356820 ] Code: 6e 08 74 6f 4d 89 f4 e8 5e ac 09 00 4d 8b 74 24 18
4d 85 f6 75 e3 e8 4f ac 09 00 8b 75 c8 48 c7 c7 78 c1 2e 85 e8 e0 cf f5
ff <0f> 0b 48 8b 75 c0 4c 89 ff e8 72 33 0b 03 48 8b 43 40 4c 8b a0 80
[ 3.358012 ] RSP: 0000:ffffc90000017b48 EFLAGS: 00010082
[ 3.358357 ] RAX: 0000000000000000 RBX: ffff888104dc8000 RCX:
0000000000000000
[ 3.358814 ] RDX: ffff8881003c8000 RSI: ffffffff8124a9e6 RDI:
00000000ffffffff
[ 3.359272 ] RBP: ffffc90000017b88 R08: 0000000000000000 R09:
0000000000000000
[ 3.359732 ] R10: ffffc900000179f0 R11: 0000000000001d04 R12:
0000000000000000
[ 3.360195 ] R13: ffff888107dc6000 R14: ffff888107dc6928 R15:
ffff888104dc80a8
[ 3.360652 ] FS: 0000000000000000(0000) GS:ffff88817bc00000(0000)
knlGS:0000000000000000
[ 3.361170 ] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 3.361538 ] CR2: 0000000000000000 CR3: 000000000582e000 CR4:
00000000000006f0
[ 3.362003 ] DR0: 0000000000000000 DR1: 0000000000000000 DR2:
0000000000000000
[ 3.362175 ] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7:
0000000000000400
[ 3.362175 ] Call Trace:
[ 3.362175 ] nj_release+0x51/0x1e0
[ 3.362175 ] nj_probe+0x450/0x950
[ 3.362175 ] ? pci_device_remove+0x110/0x110
[ 3.362175 ] local_pci_probe+0x45/0xa0
[ 3.362175 ] pci_device_probe+0x12b/0x1d0
[ 3.362175 ] really_probe+0x2a9/0x610
[ 3.362175 ] driver_probe_device+0x90/0x1d0
[ 3.362175 ] ? mutex_lock_nested+0x1b/0x20
[ 3.362175 ] device_driver_attach+0x68/0x70
[ 3.362175 ] __driver_attach+0x124/0x1b0
[ 3.362175 ] ? device_driver_attach+0x70/0x70
[ 3.362175 ] bus_for_each_dev+0xbb/0x110
[ 3.362175 ] ? rdinit_setup+0x45/0x45
[ 3.362175 ] driver_attach+0x27/0x30
[ 3.362175 ] bus_add_driver+0x1eb/0x2a0
[ 3.362175 ] driver_register+0xa9/0x180
[ 3.362175 ] __pci_register_driver+0x82/0x90
[ 3.362175 ] ? w6692_init+0x38/0x38
[ 3.362175 ] nj_init+0x36/0x38
[ 3.362175 ] do_one_initcall+0x7f/0x3d0
[ 3.362175 ] ? rdinit_setup+0x45/0x45
[ 3.362175 ] ? rcu_read_lock_sched_held+0x4f/0x80
[ 3.362175 ] kernel_init_freeable+0x2aa/0x301
[ 3.362175 ] ? rest_init+0x2c0/0x2c0
[ 3.362175 ] kernel_init+0x18/0x190
[ 3.362175 ] ? rest_init+0x2c0/0x2c0
[ 3.362175 ] ? rest_init+0x2c0/0x2c0
[ 3.362175 ] ret_from_fork+0x1f/0x30
[ 3.362175 ] Kernel panic - not syncing: panic_on_warn set ...
[ 3.362175 ] CPU: 0 PID: 1 Comm: swapper/0 Not tainted
5.13.0-rc1-00144-g25a1298726e #13
[ 3.362175 ] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS
rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014
[ 3.362175 ] Call Trace:
[ 3.362175 ] dump_stack+0xba/0xf5
[ 3.362175 ] ? free_irq+0x100/0x480
[ 3.362175 ] panic+0x15a/0x3f2
[ 3.362175 ] ? __warn+0xf2/0x150
[ 3.362175 ] ? free_irq+0x100/0x480
[ 3.362175 ] __warn+0x108/0x150
[ 3.362175 ] ? free_irq+0x100/0x480
[ 3.362175 ] report_bug+0x119/0x1c0
[ 3.362175 ] handle_bug+0x3b/0x80
[ 3.362175 ] exc_invalid_op+0x18/0x70
[ 3.362175 ] asm_exc_invalid_op+0x12/0x20
[ 3.362175 ] RIP: 0010:free_irq+0x100/0x480
[ 3.362175 ] Code: 6e 08 74 6f 4d 89 f4 e8 5e ac 09 00 4d 8b 74 24 18
4d 85 f6 75 e3 e8 4f ac 09 00 8b 75 c8 48 c7 c7 78 c1 2e 85 e8 e0 cf f5
ff <0f> 0b 48 8b 75 c0 4c 89 ff e8 72 33 0b 03 48 8b 43 40 4c 8b a0 80
[ 3.362175 ] RSP: 0000:ffffc90000017b48 EFLAGS: 00010082
[ 3.362175 ] RAX: 0000000000000000 RBX: ffff888104dc8000 RCX:
0000000000000000
[ 3.362175 ] RDX: ffff8881003c8000 RSI: ffffffff8124a9e6 RDI:
00000000ffffffff
[ 3.362175 ] RBP: ffffc90000017b88 R08: 0000000000000000 R09:
0000000000000000
[ 3.362175 ] R10: ffffc900000179f0 R11: 0000000000001d04 R12:
0000000000000000
[ 3.362175 ] R13: ffff888107dc6000 R14: ffff888107dc6928 R15:
ffff888104dc80a8
[ 3.362175 ] ? vprintk+0x76/0x150
[ 3.362175 ] ? free_irq+0x100/0x480
[ 3.362175 ] nj_release+0x51/0x1e0
[ 3.362175 ] nj_probe+0x450/0x950
[ 3.362175 ] ? pci_device_remove+0x110/0x110
[ 3.362175 ] local_pci_probe+0x45/0xa0
[ 3.362175 ] pci_device_probe+0x12b/0x1d0
[ 3.362175 ] really_probe+0x2a9/0x610
[ 3.362175 ] driver_probe_device+0x90/0x1d0
[ 3.362175 ] ? mutex_lock_nested+0x1b/0x20
[ 3.362175 ] device_driver_attach+0x68/0x70
[ 3.362175 ] __driver_attach+0x124/0x1b0
[ 3.362175 ] ? device_driver_attach+0x70/0x70
[ 3.362175 ] bus_for_each_dev+0xbb/0x110
[ 3.362175 ] ? rdinit_setup+0x45/0x45
[ 3.362175 ] driver_attach+0x27/0x30
[ 3.362175 ] bus_add_driver+0x1eb/0x2a0
[ 3.362175 ] driver_register+0xa9/0x180
[ 3.362175 ] __pci_register_driver+0x82/0x90
[ 3.362175 ] ? w6692_init+0x38/0x38
[ 3.362175 ] nj_init+0x36/0x38
[ 3.362175 ] do_one_initcall+0x7f/0x3d0
[ 3.362175 ] ? rdinit_setup+0x45/0x45
[ 3.362175 ] ? rcu_read_lock_sched_held+0x4f/0x80
[ 3.362175 ] kernel_init_freeable+0x2aa/0x301
[ 3.362175 ] ? rest_init+0x2c0/0x2c0
[ 3.362175 ] kernel_init+0x18/0x190
[ 3.362175 ] ? rest_init+0x2c0/0x2c0
[ 3.362175 ] ? rest_init+0x2c0/0x2c0
[ 3.362175 ] ret_from_fork+0x1f/0x30
[ 3.362175 ] Dumping ftrace buffer:
[ 3.362175 ] (ftrace buffer empty)
[ 3.362175 ] Kernel Offset: disabled
[ 3.362175 ] Rebooting in 1 seconds..
Reported-by: Zheyu Ma <[email protected]>
Signed-off-by: Zheyu Ma <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/isdn/hardware/mISDN/netjet.c | 1 -
1 file changed, 1 deletion(-)
diff --git a/drivers/isdn/hardware/mISDN/netjet.c b/drivers/isdn/hardware/mISDN/netjet.c
index afde4edef9ae..6dea4c180c49 100644
--- a/drivers/isdn/hardware/mISDN/netjet.c
+++ b/drivers/isdn/hardware/mISDN/netjet.c
@@ -1114,7 +1114,6 @@ nj_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
card->typ = NETJET_S_TJ300;
card->base = pci_resource_start(pdev, 0);
- card->irq = pdev->irq;
pci_set_drvdata(pdev, card);
err = setup_instance(card);
if (err)
--
2.30.2
From: Jeimon <[email protected]>
[ Upstream commit 8ab78863e9eff11910e1ac8bcf478060c29b379e ]
The function rawsock_create() calls a privileged function sk_alloc(), which requires a ns-aware check to check net->user_ns, i.e., ns_capable(). However, the original code checks the init_user_ns using capable(). So we replace the capable() with ns_capable().
Signed-off-by: Jeimon <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/nfc/rawsock.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/net/nfc/rawsock.c b/net/nfc/rawsock.c
index 92a3cfae4de8..2fba626a0125 100644
--- a/net/nfc/rawsock.c
+++ b/net/nfc/rawsock.c
@@ -345,7 +345,7 @@ static int rawsock_create(struct net *net, struct socket *sock,
return -ESOCKTNOSUPPORT;
if (sock->type == SOCK_RAW) {
- if (!capable(CAP_NET_RAW))
+ if (!ns_capable(net->user_ns, CAP_NET_RAW))
return -EPERM;
sock->ops = &rawsock_raw_ops;
} else {
--
2.30.2
From: Jiapeng Chong <[email protected]>
[ Upstream commit 65161c35554f7135e6656b3df1ce2c500ca0bdcf ]
Eliminate the follow smatch warning:
drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c:1227
bnx2x_iov_init_one() warn: missing error code 'err'.
Reported-by: Abaci Robot <[email protected]>
Signed-off-by: Jiapeng Chong <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c
index e8a09d0afe1c..545b59ff5d7e 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c
@@ -1240,8 +1240,10 @@ int bnx2x_iov_init_one(struct bnx2x *bp, int int_mode_param,
goto failed;
/* SR-IOV capability was enabled but there are no VFs*/
- if (iov->total == 0)
+ if (iov->total == 0) {
+ err = -EINVAL;
goto failed;
+ }
iov->nr_virtfn = min_t(u16, iov->total, num_vfs_param);
--
2.30.2
From: Maciej Żenczykowski <[email protected]>
commit 3370139745853f7826895293e8ac3aec1430508e upstream.
[ 190.544755] configfs-gadget gadget: notify speed -44967296
This is because 4250000000 - 2**32 is -44967296.
Fixes: 9f6ce4240a2b ("usb: gadget: f_ncm.c added")
Cc: Brooke Basile <[email protected]>
Cc: Bryan O'Donoghue <[email protected]>
Cc: Felipe Balbi <[email protected]>
Cc: Lorenzo Colitti <[email protected]>
Cc: Yauheni Kaliuta <[email protected]>
Cc: Linux USB Mailing List <[email protected]>
Acked-By: Lorenzo Colitti <[email protected]>
Signed-off-by: Maciej Żenczykowski <[email protected]>
Cc: stable <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/gadget/function/f_ncm.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/usb/gadget/function/f_ncm.c
+++ b/drivers/usb/gadget/function/f_ncm.c
@@ -588,7 +588,7 @@ static void ncm_do_notify(struct f_ncm *
data[0] = cpu_to_le32(ncm_bitrate(cdev->gadget));
data[1] = data[0];
- DBG(cdev, "notify speed %d\n", ncm_bitrate(cdev->gadget));
+ DBG(cdev, "notify speed %u\n", ncm_bitrate(cdev->gadget));
ncm->notify_state = NCM_NOTIFY_CONNECT;
break;
}
From: Kees Cook <[email protected]>
commit 591a22c14d3f45cc38bd1931c593c221df2f1881 upstream.
Commit bfb819ea20ce ("proc: Check /proc/$pid/attr/ writes against file opener")
tried to make sure that there could not be a confusion between the opener of
a /proc/$pid/attr/ file and the writer. It used struct cred to make sure
the privileges didn't change. However, there were existing cases where a more
privileged thread was passing the opened fd to a differently privileged thread
(during container setup). Instead, use mm_struct to track whether the opener
and writer are still the same process. (This is what several other proc files
already do, though for different reasons.)
Reported-by: Christian Brauner <[email protected]>
Reported-by: Andrea Righi <[email protected]>
Tested-by: Andrea Righi <[email protected]>
Fixes: bfb819ea20ce ("proc: Check /proc/$pid/attr/ writes against file opener")
Cc: [email protected]
Signed-off-by: Kees Cook <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/proc/base.c | 9 ++++++++-
1 file changed, 8 insertions(+), 1 deletion(-)
--- a/fs/proc/base.c
+++ b/fs/proc/base.c
@@ -2493,6 +2493,11 @@ out:
}
#ifdef CONFIG_SECURITY
+static int proc_pid_attr_open(struct inode *inode, struct file *file)
+{
+ return __mem_open(inode, file, PTRACE_MODE_READ_FSCREDS);
+}
+
static ssize_t proc_pid_attr_read(struct file * file, char __user * buf,
size_t count, loff_t *ppos)
{
@@ -2523,7 +2528,7 @@ static ssize_t proc_pid_attr_write(struc
struct task_struct *task = get_proc_task(inode);
/* A task may only write when it was the opener. */
- if (file->f_cred != current_real_cred())
+ if (file->private_data != current->mm)
return -EPERM;
length = -ESRCH;
@@ -2561,9 +2566,11 @@ out_no_task:
}
static const struct file_operations proc_pid_attr_operations = {
+ .open = proc_pid_attr_open,
.read = proc_pid_attr_read,
.write = proc_pid_attr_write,
.llseek = generic_file_llseek,
+ .release = mem_release,
};
static const struct pid_entry attr_dir_stuff[] = {
From: Maciej Żenczykowski <[email protected]>
commit 032e288097a553db5653af552dd8035cd2a0ba96 upstream.
usb_assign_descriptors() is called with 5 parameters,
the last 4 of which are the usb_descriptor_header for:
full-speed (USB1.1 - 12Mbps [including USB1.0 low-speed @ 1.5Mbps),
high-speed (USB2.0 - 480Mbps),
super-speed (USB3.0 - 5Gbps),
super-speed-plus (USB3.1 - 10Gbps).
The differences between full/high/super-speed descriptors are usually
substantial (due to changes in the maximum usb block size from 64 to 512
to 1024 bytes and other differences in the specs), while the difference
between 5 and 10Gbps descriptors may be as little as nothing
(in many cases the same tuning is simply good enough).
However if a gadget driver calls usb_assign_descriptors() with
a NULL descriptor for super-speed-plus and is then used on a max 10gbps
configuration, the kernel will crash with a null pointer dereference,
when a 10gbps capable device port + cable + host port combination shows up.
(This wouldn't happen if the gadget max-speed was set to 5gbps, but
it of course defaults to the maximum, and there's no real reason to
artificially limit it)
The fix is to simply use the 5gbps descriptor as the 10gbps descriptor,
if a 10gbps descriptor wasn't provided.
Obviously this won't fix the problem if the 5gbps descriptor is also
NULL, but such cases can't be so trivially solved (and any such gadgets
are unlikely to be used with USB3 ports any way).
Cc: Felipe Balbi <[email protected]>
Cc: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Maciej Żenczykowski <[email protected]>
Cc: stable <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/gadget/config.c | 8 ++++++++
1 file changed, 8 insertions(+)
--- a/drivers/usb/gadget/config.c
+++ b/drivers/usb/gadget/config.c
@@ -168,6 +168,14 @@ int usb_assign_descriptors(struct usb_fu
{
struct usb_gadget *g = f->config->cdev->gadget;
+ /* super-speed-plus descriptor falls back to super-speed one,
+ * if such a descriptor was provided, thus avoiding a NULL
+ * pointer dereference if a 5gbps capable gadget is used with
+ * a 10gbps capable config (device port + cable + host port)
+ */
+ if (!ssp)
+ ssp = ss;
+
if (fs) {
f->fs_descriptors = usb_copy_descriptors(fs);
if (!f->fs_descriptors)
From: Liangyan <[email protected]>
commit 3e08a9f9760f4a70d633c328a76408e62d6f80a3 upstream.
We've suffered from severe kernel crashes due to memory corruption on
our production environment, like,
Call Trace:
[1640542.554277] general protection fault: 0000 [#1] SMP PTI
[1640542.554856] CPU: 17 PID: 26996 Comm: python Kdump: loaded Tainted:G
[1640542.556629] RIP: 0010:kmem_cache_alloc+0x90/0x190
[1640542.559074] RSP: 0018:ffffb16faa597df8 EFLAGS: 00010286
[1640542.559587] RAX: 0000000000000000 RBX: 0000000000400200 RCX:
0000000006e931bf
[1640542.560323] RDX: 0000000006e931be RSI: 0000000000400200 RDI:
ffff9a45ff004300
[1640542.560996] RBP: 0000000000400200 R08: 0000000000023420 R09:
0000000000000000
[1640542.561670] R10: 0000000000000000 R11: 0000000000000000 R12:
ffffffff9a20608d
[1640542.562366] R13: ffff9a45ff004300 R14: ffff9a45ff004300 R15:
696c662f65636976
[1640542.563128] FS: 00007f45d7c6f740(0000) GS:ffff9a45ff840000(0000)
knlGS:0000000000000000
[1640542.563937] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[1640542.564557] CR2: 00007f45d71311a0 CR3: 000000189d63e004 CR4:
00000000003606e0
[1640542.565279] DR0: 0000000000000000 DR1: 0000000000000000 DR2:
0000000000000000
[1640542.566069] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7:
0000000000000400
[1640542.566742] Call Trace:
[1640542.567009] anon_vma_clone+0x5d/0x170
[1640542.567417] __split_vma+0x91/0x1a0
[1640542.567777] do_munmap+0x2c6/0x320
[1640542.568128] vm_munmap+0x54/0x70
[1640542.569990] __x64_sys_munmap+0x22/0x30
[1640542.572005] do_syscall_64+0x5b/0x1b0
[1640542.573724] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[1640542.575642] RIP: 0033:0x7f45d6e61e27
James Wang has reproduced it stably on the latest 4.19 LTS.
After some debugging, we finally proved that it's due to ftrace
buffer out-of-bound access using a debug tool as follows:
[ 86.775200] BUG: Out-of-bounds write at addr 0xffff88aefe8b7000
[ 86.780806] no_context+0xdf/0x3c0
[ 86.784327] __do_page_fault+0x252/0x470
[ 86.788367] do_page_fault+0x32/0x140
[ 86.792145] page_fault+0x1e/0x30
[ 86.795576] strncpy_from_unsafe+0x66/0xb0
[ 86.799789] fetch_memory_string+0x25/0x40
[ 86.804002] fetch_deref_string+0x51/0x60
[ 86.808134] kprobe_trace_func+0x32d/0x3a0
[ 86.812347] kprobe_dispatcher+0x45/0x50
[ 86.816385] kprobe_ftrace_handler+0x90/0xf0
[ 86.820779] ftrace_ops_assist_func+0xa1/0x140
[ 86.825340] 0xffffffffc00750bf
[ 86.828603] do_sys_open+0x5/0x1f0
[ 86.832124] do_syscall_64+0x5b/0x1b0
[ 86.835900] entry_SYSCALL_64_after_hwframe+0x44/0xa9
commit b220c049d519 ("tracing: Check length before giving out
the filter buffer") adds length check to protect trace data
overflow introduced in 0fc1b09ff1ff, seems that this fix can't prevent
overflow entirely, the length check should also take the sizeof
entry->array[0] into account, since this array[0] is filled the
length of trace data and occupy addtional space and risk overflow.
Link: https://lkml.kernel.org/r/[email protected]
Cc: [email protected]
Cc: Ingo Molnar <[email protected]>
Cc: Xunlei Pang <[email protected]>
Cc: Greg Kroah-Hartman <[email protected]>
Fixes: b220c049d519 ("tracing: Check length before giving out the filter buffer")
Reviewed-by: Xunlei Pang <[email protected]>
Reviewed-by: yinbinbin <[email protected]>
Reviewed-by: Wetp Zhang <[email protected]>
Tested-by: James Wang <[email protected]>
Signed-off-by: Liangyan <[email protected]>
Signed-off-by: Steven Rostedt (VMware) <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
kernel/trace/trace.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/kernel/trace/trace.c
+++ b/kernel/trace/trace.c
@@ -2083,7 +2083,7 @@ trace_event_buffer_lock_reserve(struct r
(entry = this_cpu_read(trace_buffered_event))) {
/* Try to use the per cpu buffer first */
val = this_cpu_inc_return(trace_buffered_event_cnt);
- if ((len < (PAGE_SIZE - sizeof(*entry))) && val == 1) {
+ if ((len < (PAGE_SIZE - sizeof(*entry) - sizeof(entry->array[0]))) && val == 1) {
trace_event_setup(entry, type, flags, pc);
entry->array[0] = len;
return entry;
From: Alexander Kuznetsov <[email protected]>
commit b7e24eb1caa5f8da20d405d262dba67943aedc42 upstream.
cgroup_mkdir() have restriction on newline usage in names:
$ mkdir $'/sys/fs/cgroup/cpu/test\ntest2'
mkdir: cannot create directory
'/sys/fs/cgroup/cpu/test\ntest2': Invalid argument
But in cgroup1_rename() such check is missed.
This allows us to make /proc/<pid>/cgroup unparsable:
$ mkdir /sys/fs/cgroup/cpu/test
$ mv /sys/fs/cgroup/cpu/test $'/sys/fs/cgroup/cpu/test\ntest2'
$ echo $$ > $'/sys/fs/cgroup/cpu/test\ntest2'
$ cat /proc/self/cgroup
11:pids:/
10:freezer:/
9:hugetlb:/
8:cpuset:/
7:blkio:/user.slice
6:memory:/user.slice
5:net_cls,net_prio:/
4:perf_event:/
3:devices:/user.slice
2:cpu,cpuacct:/test
test2
1:name=systemd:/
0::/
Signed-off-by: Alexander Kuznetsov <[email protected]>
Reported-by: Andrey Krasichkov <[email protected]>
Acked-by: Dmitry Yakunin <[email protected]>
Cc: [email protected]
Signed-off-by: Tejun Heo <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
kernel/cgroup.c | 4 ++++
1 file changed, 4 insertions(+)
--- a/kernel/cgroup.c
+++ b/kernel/cgroup.c
@@ -3598,6 +3598,10 @@ static int cgroup_rename(struct kernfs_n
struct cgroup *cgrp = kn->priv;
int ret;
+ /* do not accept '\n' to prevent making /proc/<pid>/cgroup unparsable */
+ if (strchr(new_name_str, '\n'))
+ return -EINVAL;
+
if (kernfs_type(kn) != KERNFS_DIR)
return -ENOTDIR;
if (kn->parent != new_parent)
From: Chris Packham <[email protected]>
[ Upstream commit 65171b2df15eb7545431d75c2729b5062da89b43 ]
Move the existing calls of mpc_i2c_fixup() to a recovery function
registered via bus_recovery_info. This makes it more obvious that
recovery is supported and allows for a future where recovery is
triggered by the i2c core.
Signed-off-by: Chris Packham <[email protected]>
Signed-off-by: Wolfram Sang <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/i2c/busses/i2c-mpc.c | 18 ++++++++++++++++--
1 file changed, 16 insertions(+), 2 deletions(-)
diff --git a/drivers/i2c/busses/i2c-mpc.c b/drivers/i2c/busses/i2c-mpc.c
index 565a49a0c564..afbbdc79c173 100644
--- a/drivers/i2c/busses/i2c-mpc.c
+++ b/drivers/i2c/busses/i2c-mpc.c
@@ -581,7 +581,7 @@ static int mpc_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num)
if ((status & (CSR_MCF | CSR_MBB | CSR_RXAK)) != 0) {
writeb(status & ~CSR_MAL,
i2c->base + MPC_I2C_SR);
- mpc_i2c_fixup(i2c);
+ i2c_recover_bus(&i2c->adap);
}
return -EIO;
}
@@ -617,7 +617,7 @@ static int mpc_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num)
if ((status & (CSR_MCF | CSR_MBB | CSR_RXAK)) != 0) {
writeb(status & ~CSR_MAL,
i2c->base + MPC_I2C_SR);
- mpc_i2c_fixup(i2c);
+ i2c_recover_bus(&i2c->adap);
}
return -EIO;
}
@@ -632,6 +632,15 @@ static u32 mpc_functionality(struct i2c_adapter *adap)
| I2C_FUNC_SMBUS_READ_BLOCK_DATA | I2C_FUNC_SMBUS_BLOCK_PROC_CALL;
}
+static int fsl_i2c_bus_recovery(struct i2c_adapter *adap)
+{
+ struct mpc_i2c *i2c = i2c_get_adapdata(adap);
+
+ mpc_i2c_fixup(i2c);
+
+ return 0;
+}
+
static const struct i2c_algorithm mpc_algo = {
.master_xfer = mpc_xfer,
.functionality = mpc_functionality,
@@ -643,6 +652,10 @@ static struct i2c_adapter mpc_ops = {
.timeout = HZ,
};
+static struct i2c_bus_recovery_info fsl_i2c_recovery_info = {
+ .recover_bus = fsl_i2c_bus_recovery,
+};
+
static const struct of_device_id mpc_i2c_of_match[];
static int fsl_i2c_probe(struct platform_device *op)
{
@@ -735,6 +748,7 @@ static int fsl_i2c_probe(struct platform_device *op)
i2c_set_adapdata(&i2c->adap, i2c);
i2c->adap.dev.parent = &op->dev;
i2c->adap.dev.of_node = of_node_get(op->dev.of_node);
+ i2c->adap.bus_recovery_info = &fsl_i2c_recovery_info;
result = i2c_add_adapter(&i2c->adap);
if (result < 0)
--
2.30.2
From: Linyu Yuan <[email protected]>
commit 305f670846a31a261462577dd0b967c4fa796871 upstream.
when skb_clone() or skb_copy_expand() fail,
it should pull skb with lengh indicated by header,
or not it will read network data and check it as header.
Cc: <[email protected]>
Signed-off-by: Linyu Yuan <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/gadget/function/f_eem.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/drivers/usb/gadget/function/f_eem.c
+++ b/drivers/usb/gadget/function/f_eem.c
@@ -502,7 +502,7 @@ static int eem_unwrap(struct gether *por
skb2 = skb_clone(skb, GFP_ATOMIC);
if (unlikely(!skb2)) {
DBG(cdev, "unable to unframe EEM packet\n");
- continue;
+ goto next;
}
skb_trim(skb2, len - ETH_FCS_LEN);
@@ -513,7 +513,7 @@ static int eem_unwrap(struct gether *por
if (unlikely(!skb3)) {
DBG(cdev, "unable to realign EEM packet\n");
dev_kfree_skb_any(skb2);
- continue;
+ goto next;
}
dev_kfree_skb_any(skb2);
skb_queue_tail(list, skb3);
From: Steven Rostedt (VMware) <[email protected]>
commit 6c14133d2d3f768e0a35128faac8aa6ed4815051 upstream.
It was reported that a bug on arm64 caused a bad ip address to be used for
updating into a nop in ftrace_init(), but the error path (rightfully)
returned -EINVAL and not -EFAULT, as the bug caused more than one error to
occur. But because -EINVAL was returned, the ftrace_bug() tried to report
what was at the location of the ip address, and read it directly. This
caused the machine to panic, as the ip was not pointing to a valid memory
address.
Instead, read the ip address with copy_from_kernel_nofault() to safely
access the memory, and if it faults, report that the address faulted,
otherwise report what was in that location.
Link: https://lore.kernel.org/lkml/[email protected]/
Cc: [email protected]
Fixes: 05736a427f7e1 ("ftrace: warn on failure to disable mcount callers")
Reported-by: Mark-PK Tsai <[email protected]>
Tested-by: Mark-PK Tsai <[email protected]>
Signed-off-by: Steven Rostedt (VMware) <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
kernel/trace/ftrace.c | 8 +++++++-
1 file changed, 7 insertions(+), 1 deletion(-)
--- a/kernel/trace/ftrace.c
+++ b/kernel/trace/ftrace.c
@@ -1961,12 +1961,18 @@ static int ftrace_hash_ipmodify_update(s
static void print_ip_ins(const char *fmt, const unsigned char *p)
{
+ char ins[MCOUNT_INSN_SIZE];
int i;
+ if (probe_kernel_read(ins, p, MCOUNT_INSN_SIZE)) {
+ printk(KERN_CONT "%s[FAULT] %px\n", fmt, p);
+ return;
+ }
+
printk(KERN_CONT "%s", fmt);
for (i = 0; i < MCOUNT_INSN_SIZE; i++)
- printk(KERN_CONT "%s%02x", i ? ":" : "", p[i]);
+ printk(KERN_CONT "%s%02x", i ? ":" : "", ins[i]);
}
enum ftrace_bug_type ftrace_bug_type;
From: Dan Carpenter <[email protected]>
[ Upstream commit 09226e8303beeec10f2ff844d2e46d1371dc58e0 ]
None of the callers are expecting NULL returns from nfs_get_client() so
this code will lead to an Oops. It's better to return an error
pointer. I expect that this is dead code so hopefully no one is
affected.
Fixes: 31434f496abb ("nfs: check hostname in nfs_get_client")
Signed-off-by: Dan Carpenter <[email protected]>
Signed-off-by: Trond Myklebust <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/nfs/client.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/fs/nfs/client.c b/fs/nfs/client.c
index 28d8a57a9908..d322ed5cbc1c 100644
--- a/fs/nfs/client.c
+++ b/fs/nfs/client.c
@@ -379,7 +379,7 @@ nfs_get_client(const struct nfs_client_initdata *cl_init,
if (cl_init->hostname == NULL) {
WARN_ON(1);
- return NULL;
+ return ERR_PTR(-EINVAL);
}
dprintk("--> nfs_get_client(%s,v%u)\n",
--
2.30.2
From: Zheyu Ma <[email protected]>
[ Upstream commit 13a6f3153922391e90036ba2267d34eed63196fc ]
When calling the 'ql_sem_spinlock', the driver has already acquired the
spin lock, so the driver should not call 'ssleep' in atomic context.
This bug can be fixed by using 'mdelay' instead of 'ssleep'.
The KASAN's log reveals it:
[ 3.238124 ] BUG: scheduling while atomic: swapper/0/1/0x00000002
[ 3.238748 ] 2 locks held by swapper/0/1:
[ 3.239151 ] #0: ffff88810177b240 (&dev->mutex){....}-{3:3}, at:
__device_driver_lock+0x41/0x60
[ 3.240026 ] #1: ffff888107c60e28 (&qdev->hw_lock){....}-{2:2}, at:
ql3xxx_probe+0x2aa/0xea0
[ 3.240873 ] Modules linked in:
[ 3.241187 ] irq event stamp: 460854
[ 3.241541 ] hardirqs last enabled at (460853): [<ffffffff843051bf>]
_raw_spin_unlock_irqrestore+0x4f/0x70
[ 3.242245 ] hardirqs last disabled at (460854): [<ffffffff843058ca>]
_raw_spin_lock_irqsave+0x2a/0x70
[ 3.242245 ] softirqs last enabled at (446076): [<ffffffff846002e4>]
__do_softirq+0x2e4/0x4b1
[ 3.242245 ] softirqs last disabled at (446069): [<ffffffff811ba5e0>]
irq_exit_rcu+0x100/0x110
[ 3.242245 ] Preemption disabled at:
[ 3.242245 ] [<ffffffff828ca5ba>] ql3xxx_probe+0x2aa/0xea0
[ 3.242245 ] Kernel panic - not syncing: scheduling while atomic
[ 3.242245 ] CPU: 2 PID: 1 Comm: swapper/0 Not tainted
5.13.0-rc1-00145
-gee7dc339169-dirty #16
[ 3.242245 ] Call Trace:
[ 3.242245 ] dump_stack+0xba/0xf5
[ 3.242245 ] ? ql3xxx_probe+0x1f0/0xea0
[ 3.242245 ] panic+0x15a/0x3f2
[ 3.242245 ] ? vprintk+0x76/0x150
[ 3.242245 ] ? ql3xxx_probe+0x2aa/0xea0
[ 3.242245 ] __schedule_bug+0xae/0xe0
[ 3.242245 ] __schedule+0x72e/0xa00
[ 3.242245 ] schedule+0x43/0xf0
[ 3.242245 ] schedule_timeout+0x28b/0x500
[ 3.242245 ] ? del_timer_sync+0xf0/0xf0
[ 3.242245 ] ? msleep+0x2f/0x70
[ 3.242245 ] msleep+0x59/0x70
[ 3.242245 ] ql3xxx_probe+0x307/0xea0
[ 3.242245 ] ? _raw_spin_unlock_irqrestore+0x3a/0x70
[ 3.242245 ] ? pci_device_remove+0x110/0x110
[ 3.242245 ] local_pci_probe+0x45/0xa0
[ 3.242245 ] pci_device_probe+0x12b/0x1d0
[ 3.242245 ] really_probe+0x2a9/0x610
[ 3.242245 ] driver_probe_device+0x90/0x1d0
[ 3.242245 ] ? mutex_lock_nested+0x1b/0x20
[ 3.242245 ] device_driver_attach+0x68/0x70
[ 3.242245 ] __driver_attach+0x124/0x1b0
[ 3.242245 ] ? device_driver_attach+0x70/0x70
[ 3.242245 ] bus_for_each_dev+0xbb/0x110
[ 3.242245 ] ? rdinit_setup+0x45/0x45
[ 3.242245 ] driver_attach+0x27/0x30
[ 3.242245 ] bus_add_driver+0x1eb/0x2a0
[ 3.242245 ] driver_register+0xa9/0x180
[ 3.242245 ] __pci_register_driver+0x82/0x90
[ 3.242245 ] ? yellowfin_init+0x25/0x25
[ 3.242245 ] ql3xxx_driver_init+0x23/0x25
[ 3.242245 ] do_one_initcall+0x7f/0x3d0
[ 3.242245 ] ? rdinit_setup+0x45/0x45
[ 3.242245 ] ? rcu_read_lock_sched_held+0x4f/0x80
[ 3.242245 ] kernel_init_freeable+0x2aa/0x301
[ 3.242245 ] ? rest_init+0x2c0/0x2c0
[ 3.242245 ] kernel_init+0x18/0x190
[ 3.242245 ] ? rest_init+0x2c0/0x2c0
[ 3.242245 ] ? rest_init+0x2c0/0x2c0
[ 3.242245 ] ret_from_fork+0x1f/0x30
[ 3.242245 ] Dumping ftrace buffer:
[ 3.242245 ] (ftrace buffer empty)
[ 3.242245 ] Kernel Offset: disabled
[ 3.242245 ] Rebooting in 1 seconds.
Reported-by: Zheyu Ma <[email protected]>
Signed-off-by: Zheyu Ma <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/qlogic/qla3xxx.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/qlogic/qla3xxx.c b/drivers/net/ethernet/qlogic/qla3xxx.c
index f2cb77c3b199..192950a112c9 100644
--- a/drivers/net/ethernet/qlogic/qla3xxx.c
+++ b/drivers/net/ethernet/qlogic/qla3xxx.c
@@ -115,7 +115,7 @@ static int ql_sem_spinlock(struct ql3_adapter *qdev,
value = readl(&port_regs->CommonRegs.semaphoreReg);
if ((value & (sem_mask >> 16)) == sem_bits)
return 0;
- ssleep(1);
+ mdelay(1000);
} while (--seconds);
return -1;
}
--
2.30.2
From: Chris Packham <[email protected]>
[ Upstream commit 8f0cdec8b5fd94135d643662506ee94ae9e98785 ]
The P2040/P2041 has an erratum where the normal i2c recovery mechanism
does not work. Implement the alternative recovery mechanism documented
in the P2040 Chip Errata Rev Q.
Signed-off-by: Chris Packham <[email protected]>
Signed-off-by: Wolfram Sang <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/i2c/busses/i2c-mpc.c | 79 +++++++++++++++++++++++++++++++++++-
1 file changed, 78 insertions(+), 1 deletion(-)
diff --git a/drivers/i2c/busses/i2c-mpc.c b/drivers/i2c/busses/i2c-mpc.c
index afbbdc79c173..90e4f839eb1c 100644
--- a/drivers/i2c/busses/i2c-mpc.c
+++ b/drivers/i2c/busses/i2c-mpc.c
@@ -23,6 +23,7 @@
#include <linux/clk.h>
#include <linux/io.h>
+#include <linux/iopoll.h>
#include <linux/fsl_devices.h>
#include <linux/i2c.h>
#include <linux/interrupt.h>
@@ -49,6 +50,7 @@
#define CCR_MTX 0x10
#define CCR_TXAK 0x08
#define CCR_RSTA 0x04
+#define CCR_RSVD 0x02
#define CSR_MCF 0x80
#define CSR_MAAS 0x40
@@ -70,6 +72,7 @@ struct mpc_i2c {
u8 fdr, dfsrr;
#endif
struct clk *clk_per;
+ bool has_errata_A004447;
};
struct mpc_i2c_divider {
@@ -178,6 +181,75 @@ static int i2c_wait(struct mpc_i2c *i2c, unsigned timeout, int writing)
return 0;
}
+static int i2c_mpc_wait_sr(struct mpc_i2c *i2c, int mask)
+{
+ void __iomem *addr = i2c->base + MPC_I2C_SR;
+ u8 val;
+
+ return readb_poll_timeout(addr, val, val & mask, 0, 100);
+}
+
+/*
+ * Workaround for Erratum A004447. From the P2040CE Rev Q
+ *
+ * 1. Set up the frequency divider and sampling rate.
+ * 2. I2CCR - a0h
+ * 3. Poll for I2CSR[MBB] to get set.
+ * 4. If I2CSR[MAL] is set (an indication that SDA is stuck low), then go to
+ * step 5. If MAL is not set, then go to step 13.
+ * 5. I2CCR - 00h
+ * 6. I2CCR - 22h
+ * 7. I2CCR - a2h
+ * 8. Poll for I2CSR[MBB] to get set.
+ * 9. Issue read to I2CDR.
+ * 10. Poll for I2CSR[MIF] to be set.
+ * 11. I2CCR - 82h
+ * 12. Workaround complete. Skip the next steps.
+ * 13. Issue read to I2CDR.
+ * 14. Poll for I2CSR[MIF] to be set.
+ * 15. I2CCR - 80h
+ */
+static void mpc_i2c_fixup_A004447(struct mpc_i2c *i2c)
+{
+ int ret;
+ u32 val;
+
+ writeccr(i2c, CCR_MEN | CCR_MSTA);
+ ret = i2c_mpc_wait_sr(i2c, CSR_MBB);
+ if (ret) {
+ dev_err(i2c->dev, "timeout waiting for CSR_MBB\n");
+ return;
+ }
+
+ val = readb(i2c->base + MPC_I2C_SR);
+
+ if (val & CSR_MAL) {
+ writeccr(i2c, 0x00);
+ writeccr(i2c, CCR_MSTA | CCR_RSVD);
+ writeccr(i2c, CCR_MEN | CCR_MSTA | CCR_RSVD);
+ ret = i2c_mpc_wait_sr(i2c, CSR_MBB);
+ if (ret) {
+ dev_err(i2c->dev, "timeout waiting for CSR_MBB\n");
+ return;
+ }
+ val = readb(i2c->base + MPC_I2C_DR);
+ ret = i2c_mpc_wait_sr(i2c, CSR_MIF);
+ if (ret) {
+ dev_err(i2c->dev, "timeout waiting for CSR_MIF\n");
+ return;
+ }
+ writeccr(i2c, CCR_MEN | CCR_RSVD);
+ } else {
+ val = readb(i2c->base + MPC_I2C_DR);
+ ret = i2c_mpc_wait_sr(i2c, CSR_MIF);
+ if (ret) {
+ dev_err(i2c->dev, "timeout waiting for CSR_MIF\n");
+ return;
+ }
+ writeccr(i2c, CCR_MEN);
+ }
+}
+
#if defined(CONFIG_PPC_MPC52xx) || defined(CONFIG_PPC_MPC512x)
static const struct mpc_i2c_divider mpc_i2c_dividers_52xx[] = {
{20, 0x20}, {22, 0x21}, {24, 0x22}, {26, 0x23},
@@ -636,7 +708,10 @@ static int fsl_i2c_bus_recovery(struct i2c_adapter *adap)
{
struct mpc_i2c *i2c = i2c_get_adapdata(adap);
- mpc_i2c_fixup(i2c);
+ if (i2c->has_errata_A004447)
+ mpc_i2c_fixup_A004447(i2c);
+ else
+ mpc_i2c_fixup(i2c);
return 0;
}
@@ -740,6 +815,8 @@ static int fsl_i2c_probe(struct platform_device *op)
dev_info(i2c->dev, "timeout %u us\n", mpc_ops.timeout * 1000000 / HZ);
platform_set_drvdata(op, i2c);
+ if (of_property_read_bool(op->dev.of_node, "fsl,i2c-erratum-a004447"))
+ i2c->has_errata_A004447 = true;
i2c->adap = mpc_ops;
of_address_to_resource(op->dev.of_node, 0, &res);
--
2.30.2
From: Dai Ngo <[email protected]>
commit f8849e206ef52b584cd9227255f4724f0cc900bb upstream.
Currently if __nfs4_proc_set_acl fails with NFS4ERR_BADOWNER it
re-enables the idmapper by clearing NFS_CAP_UIDGID_NOMAP before
retrying again. The NFS_CAP_UIDGID_NOMAP remains cleared even if
the retry fails. This causes problem for subsequent setattr
requests for v4 server that does not have idmapping configured.
This patch modifies nfs4_proc_set_acl to detect NFS4ERR_BADOWNER
and NFS4ERR_BADNAME and skips the retry, since the kernel isn't
involved in encoding the ACEs, and return -EINVAL.
Steps to reproduce the problem:
# mount -o vers=4.1,sec=sys server:/export/test /tmp/mnt
# touch /tmp/mnt/file1
# chown 99 /tmp/mnt/file1
# nfs4_setfacl -a A::[email protected]:wrtncy /tmp/mnt/file1
Failed setxattr operation: Invalid argument
# chown 99 /tmp/mnt/file1
chown: changing ownership of ‘/tmp/mnt/file1’: Invalid argument
# umount /tmp/mnt
# mount -o vers=4.1,sec=sys server:/export/test /tmp/mnt
# chown 99 /tmp/mnt/file1
#
v2: detect NFS4ERR_BADOWNER and NFS4ERR_BADNAME and skip retry
in nfs4_proc_set_acl.
Signed-off-by: Dai Ngo <[email protected]>
Signed-off-by: Trond Myklebust <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/nfs/nfs4proc.c | 8 ++++++++
1 file changed, 8 insertions(+)
--- a/fs/nfs/nfs4proc.c
+++ b/fs/nfs/nfs4proc.c
@@ -5183,6 +5183,14 @@ static int nfs4_proc_set_acl(struct inod
do {
err = __nfs4_proc_set_acl(inode, buf, buflen);
trace_nfs4_set_acl(inode, err);
+ if (err == -NFS4ERR_BADOWNER || err == -NFS4ERR_BADNAME) {
+ /*
+ * no need to retry since the kernel
+ * isn't involved in encoding the ACEs.
+ */
+ err = -EINVAL;
+ break;
+ }
err = nfs4_handle_exception(NFS_SERVER(inode), err,
&exception);
} while (exception.retry);
From: Ming Lei <[email protected]>
commit 66a834d092930cf41d809c0e989b13cd6f9ca006 upstream.
After device is initialized via device_initialize(), or its name is set via
dev_set_name(), the device has to be freed via put_device(). Otherwise
device name will be leaked because it is allocated dynamically in
dev_set_name().
Fix the leak by replacing kfree() with put_device(). Since
scsi_host_dev_release() properly handles IDA and kthread removal, remove
special-casing these from the error handling as well.
Link: https://lore.kernel.org/r/[email protected]
Cc: Bart Van Assche <[email protected]>
Cc: John Garry <[email protected]>
Cc: Hannes Reinecke <[email protected]>
Tested-by: John Garry <[email protected]>
Reviewed-by: Bart Van Assche <[email protected]>
Reviewed-by: John Garry <[email protected]>
Reviewed-by: Hannes Reinecke <[email protected]>
Signed-off-by: Ming Lei <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/scsi/hosts.c | 23 +++++++++++++----------
1 file changed, 13 insertions(+), 10 deletions(-)
--- a/drivers/scsi/hosts.c
+++ b/drivers/scsi/hosts.c
@@ -421,8 +421,10 @@ struct Scsi_Host *scsi_host_alloc(struct
mutex_init(&shost->scan_mutex);
index = ida_simple_get(&host_index_ida, 0, 0, GFP_KERNEL);
- if (index < 0)
- goto fail_kfree;
+ if (index < 0) {
+ kfree(shost);
+ return NULL;
+ }
shost->host_no = index;
shost->dma_channel = 0xff;
@@ -509,7 +511,7 @@ struct Scsi_Host *scsi_host_alloc(struct
shost_printk(KERN_WARNING, shost,
"error handler thread failed to spawn, error = %ld\n",
PTR_ERR(shost->ehandler));
- goto fail_index_remove;
+ goto fail;
}
shost->tmf_work_q = alloc_workqueue("scsi_tmf_%d",
@@ -518,17 +520,18 @@ struct Scsi_Host *scsi_host_alloc(struct
if (!shost->tmf_work_q) {
shost_printk(KERN_WARNING, shost,
"failed to create tmf workq\n");
- goto fail_kthread;
+ goto fail;
}
scsi_proc_hostdir_add(shost->hostt);
return shost;
+ fail:
+ /*
+ * Host state is still SHOST_CREATED and that is enough to release
+ * ->shost_gendev. scsi_host_dev_release() will free
+ * dev_name(&shost->shost_dev).
+ */
+ put_device(&shost->shost_gendev);
- fail_kthread:
- kthread_stop(shost->ehandler);
- fail_index_remove:
- ida_simple_remove(&host_index_ida, shost->host_no);
- fail_kfree:
- kfree(shost);
return NULL;
}
EXPORT_SYMBOL(scsi_host_alloc);
From: Paolo Bonzini <[email protected]>
commit da27a83fd6cc7780fea190e1f5c19e87019da65c upstream.
KVM's mechanism for accessing guest memory translates a guest physical
address (gpa) to a host virtual address using the right-shifted gpa
(also known as gfn) and a struct kvm_memory_slot. The translation is
performed in __gfn_to_hva_memslot using the following formula:
hva = slot->userspace_addr + (gfn - slot->base_gfn) * PAGE_SIZE
It is expected that gfn falls within the boundaries of the guest's
physical memory. However, a guest can access invalid physical addresses
in such a way that the gfn is invalid.
__gfn_to_hva_memslot is called from kvm_vcpu_gfn_to_hva_prot, which first
retrieves a memslot through __gfn_to_memslot. While __gfn_to_memslot
does check that the gfn falls within the boundaries of the guest's
physical memory or not, a CPU can speculate the result of the check and
continue execution speculatively using an illegal gfn. The speculation
can result in calculating an out-of-bounds hva. If the resulting host
virtual address is used to load another guest physical address, this
is effectively a Spectre gadget consisting of two consecutive reads,
the second of which is data dependent on the first.
Right now it's not clear if there are any cases in which this is
exploitable. One interesting case was reported by the original author
of this patch, and involves visiting guest page tables on x86. Right
now these are not vulnerable because the hva read goes through get_user(),
which contains an LFENCE speculation barrier. However, there are
patches in progress for x86 uaccess.h to mask kernel addresses instead of
using LFENCE; once these land, a guest could use speculation to read
from the VMM's ring 3 address space. Other architectures such as ARM
already use the address masking method, and would be susceptible to
this same kind of data-dependent access gadgets. Therefore, this patch
proactively protects from these attacks by masking out-of-bounds gfns
in __gfn_to_hva_memslot, which blocks speculation of invalid hvas.
Sean Christopherson noted that this patch does not cover
kvm_read_guest_offset_cached. This however is limited to a few bytes
past the end of the cache, and therefore it is unlikely to be useful in
the context of building a chain of data dependent accesses.
Reported-by: Artemiy Margaritov <[email protected]>
Co-developed-by: Artemiy Margaritov <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
include/linux/kvm_host.h | 11 ++++++++++-
1 file changed, 10 insertions(+), 1 deletion(-)
--- a/include/linux/kvm_host.h
+++ b/include/linux/kvm_host.h
@@ -26,6 +26,7 @@
#include <linux/context_tracking.h>
#include <linux/irqbypass.h>
#include <linux/swait.h>
+#include <linux/nospec.h>
#include <asm/signal.h>
#include <linux/kvm.h>
@@ -932,7 +933,15 @@ __gfn_to_memslot(struct kvm_memslots *sl
static inline unsigned long
__gfn_to_hva_memslot(struct kvm_memory_slot *slot, gfn_t gfn)
{
- return slot->userspace_addr + (gfn - slot->base_gfn) * PAGE_SIZE;
+ /*
+ * The index was checked originally in search_memslots. To avoid
+ * that a malicious guest builds a Spectre gadget out of e.g. page
+ * table walks, do not let the processor speculate loads outside
+ * the guest's registered memslots.
+ */
+ unsigned long offset = array_index_nospec(gfn - slot->base_gfn,
+ slot->npages);
+ return slot->userspace_addr + offset * PAGE_SIZE;
}
static inline int memslot_id(struct kvm *kvm, gfn_t gfn)
From: Alexandre GRIVEAUX <[email protected]>
commit fc0b3dc9a11771c3919eaaaf9d649138b095aa0f upstream.
Add device id for Zyxel Omni 56K Plus modem, this modem include:
USB chip:
NetChip
NET2888
Main chip:
901041A
F721501APGF
Another modem using the same chips is the Zyxel Omni 56K DUO/NEO,
could be added with the right USB ID.
Signed-off-by: Alexandre GRIVEAUX <[email protected]>
Cc: [email protected]
Signed-off-by: Johan Hovold <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/serial/omninet.c | 2 ++
1 file changed, 2 insertions(+)
--- a/drivers/usb/serial/omninet.c
+++ b/drivers/usb/serial/omninet.c
@@ -27,6 +27,7 @@
#define ZYXEL_VENDOR_ID 0x0586
#define ZYXEL_OMNINET_ID 0x1000
+#define ZYXEL_OMNI_56K_PLUS_ID 0x1500
/* This one seems to be a re-branded ZyXEL device */
#define BT_IGNITIONPRO_ID 0x2000
@@ -44,6 +45,7 @@ static int omninet_port_remove(struct us
static const struct usb_device_id id_table[] = {
{ USB_DEVICE(ZYXEL_VENDOR_ID, ZYXEL_OMNINET_ID) },
+ { USB_DEVICE(ZYXEL_VENDOR_ID, ZYXEL_OMNI_56K_PLUS_ID) },
{ USB_DEVICE(ZYXEL_VENDOR_ID, BT_IGNITIONPRO_ID) },
{ } /* Terminating entry */
};
From: Paolo Bonzini <[email protected]>
commit 4422829e8053068e0225e4d0ef42dc41ea7c9ef5 upstream.
array_index_nospec does not work for uint64_t on 32-bit builds.
However, the size of a memory slot must be less than 20 bits wide
on those system, since the memory slot must fit in the user
address space. So just store it in an unsigned long.
Signed-off-by: Paolo Bonzini <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
include/linux/kvm_host.h | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/include/linux/kvm_host.h
+++ b/include/linux/kvm_host.h
@@ -939,8 +939,8 @@ __gfn_to_hva_memslot(struct kvm_memory_s
* table walks, do not let the processor speculate loads outside
* the guest's registered memslots.
*/
- unsigned long offset = array_index_nospec(gfn - slot->base_gfn,
- slot->npages);
+ unsigned long offset = gfn - slot->base_gfn;
+ offset = array_index_nospec(offset, slot->npages);
return slot->userspace_addr + offset * PAGE_SIZE;
}
From: Shakeel Butt <[email protected]>
[ Upstream commit 45e1ba40837ac2f6f4d4716bddb8d44bd7e4a251 ]
This patch effectively reverts the commit a3e72739b7a7 ("cgroup: fix
too early usage of static_branch_disable()"). The commit 6041186a3258
("init: initialize jump labels before command line option parsing") has
moved the jump_label_init() before parse_args() which has made the
commit a3e72739b7a7 unnecessary. On the other hand there are
consequences of disabling the controllers later as there are subsystems
doing the controller checks for different decisions. One such incident
is reported [1] regarding the memory controller and its impact on memory
reclaim code.
[1] https://lore.kernel.org/linux-mm/[email protected]
Signed-off-by: Shakeel Butt <[email protected]>
Reported-by: NOMURA JUNICHI(野村 淳一) <[email protected]>
Signed-off-by: Tejun Heo <[email protected]>
Tested-by: Jun'ichi Nomura <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
kernel/cgroup.c | 13 +++++--------
1 file changed, 5 insertions(+), 8 deletions(-)
diff --git a/kernel/cgroup.c b/kernel/cgroup.c
index 684d02f343b4..3e0fca894a8b 100644
--- a/kernel/cgroup.c
+++ b/kernel/cgroup.c
@@ -5636,8 +5636,6 @@ int __init cgroup_init_early(void)
return 0;
}
-static u16 cgroup_disable_mask __initdata;
-
/**
* cgroup_init - cgroup initialization
*
@@ -5695,12 +5693,8 @@ int __init cgroup_init(void)
* disabled flag and cftype registration needs kmalloc,
* both of which aren't available during early_init.
*/
- if (cgroup_disable_mask & (1 << ssid)) {
- static_branch_disable(cgroup_subsys_enabled_key[ssid]);
- printk(KERN_INFO "Disabling %s control group subsystem\n",
- ss->name);
+ if (!cgroup_ssid_enabled(ssid))
continue;
- }
if (cgroup_ssid_no_v1(ssid))
printk(KERN_INFO "Disabling %s control group subsystem in v1 mounts\n",
@@ -6143,7 +6137,10 @@ static int __init cgroup_disable(char *str)
if (strcmp(token, ss->name) &&
strcmp(token, ss->legacy_name))
continue;
- cgroup_disable_mask |= 1 << i;
+
+ static_branch_disable(cgroup_subsys_enabled_key[i]);
+ pr_info("Disabling %s control group subsystem\n",
+ ss->name);
}
}
return 1;
--
2.30.2
From: Johannes Berg <[email protected]>
[ Upstream commit 1d482e666b8e74c7555dbdfbfb77205eeed3ff2d ]
Syzbot reports that in mac80211 we have a potential deadlock
between our "local->stop_queue_reasons_lock" (spinlock) and
netlink's nl_table_lock (rwlock). This is because there's at
least one situation in which we might try to send a netlink
message with this spinlock held while it is also possible to
take the spinlock from a hardirq context, resulting in the
following deadlock scenario reported by lockdep:
CPU0 CPU1
---- ----
lock(nl_table_lock);
local_irq_disable();
lock(&local->queue_stop_reason_lock);
lock(nl_table_lock);
<Interrupt>
lock(&local->queue_stop_reason_lock);
This seems valid, we can take the queue_stop_reason_lock in
any kind of context ("CPU0"), and call ieee80211_report_ack_skb()
with the spinlock held and IRQs disabled ("CPU1") in some
code path (ieee80211_do_stop() via ieee80211_free_txskb()).
Short of disallowing netlink use in scenarios like these
(which would be rather complex in mac80211's case due to
the deep callchain), it seems the only fix for this is to
disable IRQs while nl_table_lock is held to avoid hitting
this scenario, this disallows the "CPU0" portion of the
reported deadlock.
Note that the writer side (netlink_table_grab()) already
disables IRQs for this lock.
Unfortunately though, this seems like a huge hammer, and
maybe the whole netlink table locking should be reworked.
Reported-by: [email protected]
Signed-off-by: Johannes Berg <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/netlink/af_netlink.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/net/netlink/af_netlink.c b/net/netlink/af_netlink.c
index 205865292ba3..541410f1c3b7 100644
--- a/net/netlink/af_netlink.c
+++ b/net/netlink/af_netlink.c
@@ -436,11 +436,13 @@ void netlink_table_ungrab(void)
static inline void
netlink_lock_table(void)
{
+ unsigned long flags;
+
/* read_lock() synchronizes us to netlink_table_grab */
- read_lock(&nl_table_lock);
+ read_lock_irqsave(&nl_table_lock, flags);
atomic_inc(&nl_table_users);
- read_unlock(&nl_table_lock);
+ read_unlock_irqrestore(&nl_table_lock, flags);
}
static inline void
--
2.30.2
From: Dan Carpenter <[email protected]>
[ Upstream commit 1dde47a66d4fb181830d6fa000e5ea86907b639e ]
We spotted a bug recently during a review where a driver was
unregistering a bus that wasn't registered, which would trigger this
BUG_ON(). Let's handle that situation more gracefully, and just print
a warning and return.
Reported-by: Russell King (Oracle) <[email protected]>
Signed-off-by: Dan Carpenter <[email protected]>
Reviewed-by: Russell King (Oracle) <[email protected]>
Reviewed-by: Andrew Lunn <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/phy/mdio_bus.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/net/phy/mdio_bus.c b/drivers/net/phy/mdio_bus.c
index a9bbdcec0bad..8cc7563ab103 100644
--- a/drivers/net/phy/mdio_bus.c
+++ b/drivers/net/phy/mdio_bus.c
@@ -362,7 +362,8 @@ void mdiobus_unregister(struct mii_bus *bus)
struct mdio_device *mdiodev;
int i;
- BUG_ON(bus->state != MDIOBUS_REGISTERED);
+ if (WARN_ON_ONCE(bus->state != MDIOBUS_REGISTERED))
+ return;
bus->state = MDIOBUS_UNREGISTERED;
for (i = 0; i < PHY_MAX_ADDR; i++) {
--
2.30.2
From: Sergey Senozhatsky <[email protected]>
[ Upstream commit 940d71c6462e8151c78f28e4919aa8882ff2054e ]
If VCPU is suspended (VM suspend) in wq_watchdog_timer_fn() then
once this VCPU resumes it will see the new jiffies value, while it
may take a while before IRQ detects PVCLOCK_GUEST_STOPPED on this
VCPU and updates all the watchdogs via pvclock_touch_watchdogs().
There is a small chance of misreported WQ stalls in the meantime,
because new jiffies is time_after() old 'ts + thresh'.
wq_watchdog_timer_fn()
{
for_each_pool(pool, pi) {
if (time_after(jiffies, ts + thresh)) {
pr_emerg("BUG: workqueue lockup - pool");
}
}
}
Save jiffies at the beginning of this function and use that value
for stall detection. If VM gets suspended then we continue using
"old" jiffies value and old WQ touch timestamps. If IRQ at some
point restarts the stall detection cycle (pvclock_touch_watchdogs())
then old jiffies will always be before new 'ts + thresh'.
Signed-off-by: Sergey Senozhatsky <[email protected]>
Signed-off-by: Tejun Heo <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
kernel/workqueue.c | 12 ++++++++++--
1 file changed, 10 insertions(+), 2 deletions(-)
diff --git a/kernel/workqueue.c b/kernel/workqueue.c
index 3231088afd73..a410d5827a73 100644
--- a/kernel/workqueue.c
+++ b/kernel/workqueue.c
@@ -49,6 +49,7 @@
#include <linux/moduleparam.h>
#include <linux/uaccess.h>
#include <linux/nmi.h>
+#include <linux/kvm_para.h>
#include "workqueue_internal.h"
@@ -5387,6 +5388,7 @@ static void wq_watchdog_timer_fn(unsigned long data)
{
unsigned long thresh = READ_ONCE(wq_watchdog_thresh) * HZ;
bool lockup_detected = false;
+ unsigned long now = jiffies;
struct worker_pool *pool;
int pi;
@@ -5401,6 +5403,12 @@ static void wq_watchdog_timer_fn(unsigned long data)
if (list_empty(&pool->worklist))
continue;
+ /*
+ * If a virtual machine is stopped by the host it can look to
+ * the watchdog like a stall.
+ */
+ kvm_check_and_clear_guest_paused();
+
/* get the latest of pool and touched timestamps */
pool_ts = READ_ONCE(pool->watchdog_ts);
touched = READ_ONCE(wq_watchdog_touched);
@@ -5419,12 +5427,12 @@ static void wq_watchdog_timer_fn(unsigned long data)
}
/* did we stall? */
- if (time_after(jiffies, ts + thresh)) {
+ if (time_after(now, ts + thresh)) {
lockup_detected = true;
pr_emerg("BUG: workqueue lockup - pool");
pr_cont_pool_info(pool);
pr_cont(" stuck for %us!\n",
- jiffies_to_msecs(jiffies - pool_ts) / 1000);
+ jiffies_to_msecs(now - pool_ts) / 1000);
}
}
--
2.30.2
From: Marco Elver <[email protected]>
commit 6c605f8371159432ec61cbb1488dcf7ad24ad19a upstream.
KCSAN reports a data race between increment and decrement of pin_count:
write to 0xffff888237c2d4e0 of 4 bytes by task 15740 on cpu 1:
find_get_context kernel/events/core.c:4617
__do_sys_perf_event_open kernel/events/core.c:12097 [inline]
__se_sys_perf_event_open kernel/events/core.c:11933
...
read to 0xffff888237c2d4e0 of 4 bytes by task 15743 on cpu 0:
perf_unpin_context kernel/events/core.c:1525 [inline]
__do_sys_perf_event_open kernel/events/core.c:12328 [inline]
__se_sys_perf_event_open kernel/events/core.c:11933
...
Because neither read-modify-write here is atomic, this can lead to one
of the operations being lost, resulting in an inconsistent pin_count.
Fix it by adding the missing locking in the CPU-event case.
Fixes: fe4b04fa31a6 ("perf: Cure task_oncpu_function_call() races")
Reported-by: [email protected]
Signed-off-by: Marco Elver <[email protected]>
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
kernel/events/core.c | 2 ++
1 file changed, 2 insertions(+)
--- a/kernel/events/core.c
+++ b/kernel/events/core.c
@@ -3782,7 +3782,9 @@ find_get_context(struct pmu *pmu, struct
cpuctx = per_cpu_ptr(pmu->pmu_cpu_context, cpu);
ctx = &cpuctx->ctx;
get_ctx(ctx);
+ raw_spin_lock_irqsave(&ctx->lock, flags);
++ctx->pin_count;
+ raw_spin_unlock_irqrestore(&ctx->lock, flags);
return ctx;
}
From: George McCollister <[email protected]>
commit bc96c72df33ee81b24d87eab953c73f7bcc04f29 upstream.
Add PID for the NovaTech OrionMX so it can be automatically detected.
Signed-off-by: George McCollister <[email protected]>
Cc: [email protected]
Signed-off-by: Johan Hovold <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/serial/ftdi_sio.c | 1 +
drivers/usb/serial/ftdi_sio_ids.h | 1 +
2 files changed, 2 insertions(+)
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -606,6 +606,7 @@ static const struct usb_device_id id_tab
.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
{ USB_DEVICE(FTDI_VID, FTDI_NT_ORIONLX_PLUS_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_NT_ORION_IO_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_NT_ORIONMX_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_SYNAPSE_SS200_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_CUSTOMWARE_MINIPLEX_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_CUSTOMWARE_MINIPLEX2_PID) },
--- a/drivers/usb/serial/ftdi_sio_ids.h
+++ b/drivers/usb/serial/ftdi_sio_ids.h
@@ -580,6 +580,7 @@
#define FTDI_NT_ORIONLXM_PID 0x7c90 /* OrionLXm Substation Automation Platform */
#define FTDI_NT_ORIONLX_PLUS_PID 0x7c91 /* OrionLX+ Substation Automation Platform */
#define FTDI_NT_ORION_IO_PID 0x7c92 /* Orion I/O */
+#define FTDI_NT_ORIONMX_PID 0x7c93 /* OrionMX */
/*
* Synapse Wireless product ids (FTDI_VID)
From: Maciej Żenczykowski <[email protected]>
commit 90c4d05780d47e14a50e11a7f17373104cd47d25 upstream.
This avoids a null pointer dereference in
f_{ecm,eem,hid,loopback,printer,rndis,serial,sourcesink,subset,tcm}
by simply reusing the 5gbps config for 10gbps.
Fixes: eaef50c76057 ("usb: gadget: Update usb_assign_descriptors for SuperSpeedPlus")
Cc: Christophe JAILLET <[email protected]>
Cc: Felipe Balbi <[email protected]>
Cc: Gustavo A. R. Silva <[email protected]>
Cc: Lorenzo Colitti <[email protected]>
Cc: Martin K. Petersen <[email protected]>
Cc: Michael R Sweet <[email protected]>
Cc: Mike Christie <[email protected]>
Cc: Pawel Laszczak <[email protected]>
Cc: Peter Chen <[email protected]>
Cc: Sudhakar Panneerselvam <[email protected]>
Cc: Wei Ming Chen <[email protected]>
Cc: Will McVicker <[email protected]>
Cc: Zqiang <[email protected]>
Reviewed-By: Lorenzo Colitti <[email protected]>
Cc: stable <[email protected]>
Signed-off-by: Maciej Żenczykowski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/gadget/function/f_ecm.c | 2 +-
drivers/usb/gadget/function/f_eem.c | 2 +-
drivers/usb/gadget/function/f_loopback.c | 2 +-
drivers/usb/gadget/function/f_printer.c | 3 ++-
drivers/usb/gadget/function/f_rndis.c | 2 +-
drivers/usb/gadget/function/f_serial.c | 2 +-
drivers/usb/gadget/function/f_sourcesink.c | 3 ++-
drivers/usb/gadget/function/f_subset.c | 2 +-
drivers/usb/gadget/function/f_tcm.c | 3 ++-
9 files changed, 12 insertions(+), 9 deletions(-)
--- a/drivers/usb/gadget/function/f_ecm.c
+++ b/drivers/usb/gadget/function/f_ecm.c
@@ -793,7 +793,7 @@ ecm_bind(struct usb_configuration *c, st
fs_ecm_notify_desc.bEndpointAddress;
status = usb_assign_descriptors(f, ecm_fs_function, ecm_hs_function,
- ecm_ss_function, NULL);
+ ecm_ss_function, ecm_ss_function);
if (status)
goto fail;
--- a/drivers/usb/gadget/function/f_eem.c
+++ b/drivers/usb/gadget/function/f_eem.c
@@ -309,7 +309,7 @@ static int eem_bind(struct usb_configura
eem_ss_out_desc.bEndpointAddress = eem_fs_out_desc.bEndpointAddress;
status = usb_assign_descriptors(f, eem_fs_function, eem_hs_function,
- eem_ss_function, NULL);
+ eem_ss_function, eem_ss_function);
if (status)
goto fail;
--- a/drivers/usb/gadget/function/f_loopback.c
+++ b/drivers/usb/gadget/function/f_loopback.c
@@ -211,7 +211,7 @@ autoconf_fail:
ss_loop_sink_desc.bEndpointAddress = fs_loop_sink_desc.bEndpointAddress;
ret = usb_assign_descriptors(f, fs_loopback_descs, hs_loopback_descs,
- ss_loopback_descs, NULL);
+ ss_loopback_descs, ss_loopback_descs);
if (ret)
return ret;
--- a/drivers/usb/gadget/function/f_printer.c
+++ b/drivers/usb/gadget/function/f_printer.c
@@ -1057,7 +1057,8 @@ autoconf_fail:
ss_ep_out_desc.bEndpointAddress = fs_ep_out_desc.bEndpointAddress;
ret = usb_assign_descriptors(f, fs_printer_function,
- hs_printer_function, ss_printer_function, NULL);
+ hs_printer_function, ss_printer_function,
+ ss_printer_function);
if (ret)
return ret;
--- a/drivers/usb/gadget/function/f_rndis.c
+++ b/drivers/usb/gadget/function/f_rndis.c
@@ -789,7 +789,7 @@ rndis_bind(struct usb_configuration *c,
ss_notify_desc.bEndpointAddress = fs_notify_desc.bEndpointAddress;
status = usb_assign_descriptors(f, eth_fs_function, eth_hs_function,
- eth_ss_function, NULL);
+ eth_ss_function, eth_ss_function);
if (status)
goto fail;
--- a/drivers/usb/gadget/function/f_serial.c
+++ b/drivers/usb/gadget/function/f_serial.c
@@ -236,7 +236,7 @@ static int gser_bind(struct usb_configur
gser_ss_out_desc.bEndpointAddress = gser_fs_out_desc.bEndpointAddress;
status = usb_assign_descriptors(f, gser_fs_function, gser_hs_function,
- gser_ss_function, NULL);
+ gser_ss_function, gser_ss_function);
if (status)
goto fail;
dev_dbg(&cdev->gadget->dev, "generic ttyGS%d: %s speed IN/%s OUT/%s\n",
--- a/drivers/usb/gadget/function/f_sourcesink.c
+++ b/drivers/usb/gadget/function/f_sourcesink.c
@@ -435,7 +435,8 @@ no_iso:
ss_iso_sink_desc.bEndpointAddress = fs_iso_sink_desc.bEndpointAddress;
ret = usb_assign_descriptors(f, fs_source_sink_descs,
- hs_source_sink_descs, ss_source_sink_descs, NULL);
+ hs_source_sink_descs, ss_source_sink_descs,
+ ss_source_sink_descs);
if (ret)
return ret;
--- a/drivers/usb/gadget/function/f_subset.c
+++ b/drivers/usb/gadget/function/f_subset.c
@@ -362,7 +362,7 @@ geth_bind(struct usb_configuration *c, s
fs_subset_out_desc.bEndpointAddress;
status = usb_assign_descriptors(f, fs_eth_function, hs_eth_function,
- ss_eth_function, NULL);
+ ss_eth_function, ss_eth_function);
if (status)
goto fail;
--- a/drivers/usb/gadget/function/f_tcm.c
+++ b/drivers/usb/gadget/function/f_tcm.c
@@ -2071,7 +2071,8 @@ static int tcm_bind(struct usb_configura
uasp_fs_cmd_desc.bEndpointAddress = uasp_ss_cmd_desc.bEndpointAddress;
ret = usb_assign_descriptors(f, uasp_fs_function_desc,
- uasp_hs_function_desc, uasp_ss_function_desc, NULL);
+ uasp_hs_function_desc, uasp_ss_function_desc,
+ uasp_ss_function_desc);
if (ret)
goto ep_fail;
From: Dmitry Baryshkov <[email protected]>
commit 98e48cd9283dbac0e1445ee780889f10b3d1db6a upstream.
For the boot-on/always-on regulators the set_machine_constrainst() is
called before resolving rdev->supply. Thus the code would try to enable
rdev before enabling supplying regulator. Enforce resolving supply
regulator before enabling rdev.
Fixes: aea6cb99703e ("regulator: resolve supply after creating regulator")
Signed-off-by: Dmitry Baryshkov <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/regulator/core.c | 6 ++++++
1 file changed, 6 insertions(+)
--- a/drivers/regulator/core.c
+++ b/drivers/regulator/core.c
@@ -1080,6 +1080,12 @@ static int set_machine_constraints(struc
* and we have control then make sure it is enabled.
*/
if (rdev->constraints->always_on || rdev->constraints->boot_on) {
+ /* If we want to enable this regulator, make sure that we know
+ * the supplying regulator.
+ */
+ if (rdev->supply_name && !rdev->supply)
+ return -EPROBE_DEFER;
+
ret = _regulator_do_enable(rdev);
if (ret < 0 && ret != -EINVAL) {
rdev_err(rdev, "failed to enable\n");
From: Leo Yan <[email protected]>
[ Upstream commit 197eecb6ecae0b04bd694432f640ff75597fed9c ]
When peeking an event, it has a short path and a long path. The short
path uses the session pointer "one_mmap_addr" to directly fetch the
event; and the long path needs to read out the event header and the
following event data from file and fill into the buffer pointer passed
through the argument "buf".
The issue is in the long path that it copies the event header and event
data into the same destination address which pointer "buf", this means
the event header is overwritten. We are just lucky to run into the
short path in most cases, so we don't hit the issue in the long path.
This patch adds the offset "hdr_sz" to the pointer "buf" when copying
the event data, so that it can reserve the event header which can be
used properly by its caller.
Fixes: 5a52f33adf02 ("perf session: Add perf_session__peek_event()")
Signed-off-by: Leo Yan <[email protected]>
Acked-by: Adrian Hunter <[email protected]>
Acked-by: Jiri Olsa <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
tools/perf/util/session.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/tools/perf/util/session.c b/tools/perf/util/session.c
index 89808ab008ad..9187d8119a75 100644
--- a/tools/perf/util/session.c
+++ b/tools/perf/util/session.c
@@ -1427,6 +1427,7 @@ int perf_session__peek_event(struct perf_session *session, off_t file_offset,
if (event->header.size < hdr_sz || event->header.size > buf_sz)
return -1;
+ buf += hdr_sz;
rest = event->header.size - hdr_sz;
if (readn(fd, buf, rest) != (ssize_t)rest)
--
2.30.2
From: Ming Lei <[email protected]>
commit 1e0d4e6225996f05271de1ebcb1a7c9381af0b27 upstream.
get_device(shost->shost_gendev.parent) is called after host state has
switched to SHOST_RUNNING. scsi_host_dev_release() shouldn't release the
parent device if host state is still SHOST_CREATED.
Link: https://lore.kernel.org/r/[email protected]
Cc: Bart Van Assche <[email protected]>
Cc: John Garry <[email protected]>
Cc: Hannes Reinecke <[email protected]>
Tested-by: John Garry <[email protected]>
Reviewed-by: John Garry <[email protected]>
Signed-off-by: Ming Lei <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/scsi/hosts.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/scsi/hosts.c
+++ b/drivers/scsi/hosts.c
@@ -368,7 +368,7 @@ static void scsi_host_dev_release(struct
ida_simple_remove(&host_index_ida, shost->host_no);
- if (parent)
+ if (shost->shost_state != SHOST_CREATED)
put_device(parent);
kfree(shost);
}
Hi Greg,
On 14/06/2021 11:26, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.9.273 release.
> There are 42 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed, 16 Jun 2021 10:26:30 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.9.273-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.9.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
>
> -------------
> Pseudo-Shortlog of commits:
...
> Dmitry Baryshkov <[email protected]>
> regulator: core: resolve supply for boot-on/always-on regulators
I am seeing a boot regression on one board with 4.9.273-rc1 and bisect
is pointing to the above commit. Reverting this on top of 4.9.273-rc1
fixes the problem.
Test results for stable-v4.9:
8 builds: 8 pass, 0 fail
18 boots: 16 pass, 2 fail
30 tests: 30 pass, 0 fail
Linux version: 4.9.273-rc1-gaf46d32b472e
Boards tested: tegra124-jetson-tk1, tegra20-ventana,
tegra210-p2371-2180, tegra30-cardhu-a04
Boot failures: tegra210-p2371-2180
Cheers
Jon
--
nvpublic
On 6/14/2021 3:26 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.9.273 release.
> There are 42 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed, 16 Jun 2021 10:26:30 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.9.273-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.9.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
On ARCH_BRCMSTB using 32-bit and 64-bit kernels:
Tested-by: Florian Fainelli <[email protected]>
--
Florian
On 6/14/21 4:26 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.9.273 release.
> There are 42 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed, 16 Jun 2021 10:26:30 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.9.273-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.9.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
>
Compiled and booted on my test system. No dmesg regressions.
Tested-by: Shuah Khan <[email protected]>
thanks,
-- Shuah
On Mon, Jun 14, 2021 at 06:54:37PM +0100, Jon Hunter wrote:
> Hi Greg,
>
> On 14/06/2021 11:26, Greg Kroah-Hartman wrote:
> > This is the start of the stable review cycle for the 4.9.273 release.
> > There are 42 patches in this series, all will be posted as a response
> > to this one. If anyone has any issues with these being applied, please
> > let me know.
> >
> > Responses should be made by Wed, 16 Jun 2021 10:26:30 +0000.
> > Anything received after that time might be too late.
> >
> > The whole patch series can be found in one patch at:
> > https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.9.273-rc1.gz
> > or in the git tree and branch at:
> > git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.9.y
> > and the diffstat can be found below.
> >
> > thanks,
> >
> > greg k-h
> >
> > -------------
> > Pseudo-Shortlog of commits:
>
> ...
>
> > Dmitry Baryshkov <[email protected]>
> > regulator: core: resolve supply for boot-on/always-on regulators
>
>
> I am seeing a boot regression on one board with 4.9.273-rc1 and bisect
> is pointing to the above commit. Reverting this on top of 4.9.273-rc1
> fixes the problem.
>
> Test results for stable-v4.9:
> 8 builds: 8 pass, 0 fail
> 18 boots: 16 pass, 2 fail
> 30 tests: 30 pass, 0 fail
>
> Linux version: 4.9.273-rc1-gaf46d32b472e
> Boards tested: tegra124-jetson-tk1, tegra20-ventana,
> tegra210-p2371-2180, tegra30-cardhu-a04
>
> Boot failures: tegra210-p2371-2180
Thanks for testing and letting me know. I will go drop that commit and
push out a -rc2 with that change.
greg k-h