2022-08-04 13:23:35

by Balsam CHIHI

Subject: [PATCH v8.1, 6/7] arm64: dts: mt8195: Add thermal zone

From: Tinghan Shen <[email protected]>

This adds the thermal zone for the mt8195.

Signed-off-by: Tinghan Shen <[email protected]>
Signed-off-by: Ben Tseng <[email protected]>
Signed-off-by: Alexandre Bailon <[email protected]>
Signed-off-by: Balsam CHIHI <[email protected]>
---
arch/arm64/boot/dts/mediatek/mt8195.dtsi | 111 +++++++++++++++++++++++
1 file changed, 111 insertions(+)

diff --git a/arch/arm64/boot/dts/mediatek/mt8195.dtsi b/arch/arm64/boot/dts/mediatek/mt8195.dtsi
index cbd0401968a2..5890e688eebe 100644
--- a/arch/arm64/boot/dts/mediatek/mt8195.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8195.dtsi
@@ -10,6 +10,7 @@
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/phy/phy.h>
#include <dt-bindings/pinctrl/mt8195-pinfunc.h>
+#include <dt-bindings/reset/mt8195-resets.h>

/ {
compatible = "mediatek,mt8195";
@@ -452,6 +453,28 @@ spi0: spi@1100a000 {
status = "disabled";
};

+ lvts_ap: thermal-sensor@1100b000 {
+ compatible = "mediatek,mt8195-lvts-ap";
+ #thermal-sensor-cells = <1>;
+ reg = <0 0x1100b000 0 0x1000>;
+ interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&infracfg_ao CLK_INFRA_AO_THERM>;
+ resets = <&infracfg_ao MT8195_INFRA_RST0_THERM_CTRL_SWRST>;
+ nvmem-cells = <&lvts_efuse_data1 &lvts_efuse_data2>;
+ nvmem-cell-names = "lvts_calib_data1", "lvts_calib_data2";
+ };
+
+ lvts_mcu: thermal-sensor@11278000 {
+ compatible = "mediatek,mt8195-lvts-mcu";
+ #thermal-sensor-cells = <1>;
+ reg = <0 0x11278000 0 0x1000>;
+ interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&infracfg_ao CLK_INFRA_AO_THERM>;
+ resets = <&infracfg_ao MT8195_INFRA_RST4_THERM_CTRL_MCU_SWRST>;
+ nvmem-cells = <&lvts_efuse_data1 &lvts_efuse_data2>;
+ nvmem-cell-names = "lvts_calib_data1", "lvts_calib_data2";
+ };
+
spi1: spi@11010000 {
compatible = "mediatek,mt8195-spi",
"mediatek,mt6765-spi";
@@ -1106,4 +1129,92 @@ vencsys_core1: clock-controller@1b000000 {
#clock-cells = <1>;
};
};
+
+ thermal_zones: thermal-zones {
+ cpu-big1-thermal {
+ polling-delay = <0>;
+ polling-delay-passive = <0>;
+ thermal-sensors = <&lvts_mcu 0>;
+ };
+ cpu-big2-thermal {
+ polling-delay = <0>;
+ polling-delay-passive = <0>;
+ thermal-sensors = <&lvts_mcu 1>;
+ };
+ cpu-big3-thermal {
+ polling-delay = <0>;
+ polling-delay-passive = <0>;
+ thermal-sensors = <&lvts_mcu 2>;
+ };
+ cpu-big4-thermal {
+ polling-delay = <0>;
+ polling-delay-passive = <0>;
+ thermal-sensors = <&lvts_mcu 3>;
+ };
+ cpu-little1-thermal {
+ polling-delay = <0>;
+ polling-delay-passive = <0>;
+ thermal-sensors = <&lvts_mcu 4>;
+ };
+ cpu-little2-thermal {
+ polling-delay = <0>;
+ polling-delay-passive = <0>;
+ thermal-sensors = <&lvts_mcu 5>;
+ };
+ cpu-little3-thermal {
+ polling-delay = <0>;
+ polling-delay-passive = <0>;
+ thermal-sensors = <&lvts_mcu 6>;
+ };
+ cpu-little4-thermal {
+ polling-delay = <0>;
+ polling-delay-passive = <0>;
+ thermal-sensors = <&lvts_mcu 7>;
+ };
+ vpu1-thermal {
+ polling-delay = <0>;
+ polling-delay-passive = <0>;
+ thermal-sensors = <&lvts_ap 0>;
+ };
+ vpu2-thermal {
+ polling-delay = <0>;
+ polling-delay-passive = <0>;
+ thermal-sensors = <&lvts_ap 1>;
+ };
+ gpu1-thermal {
+ polling-delay = <0>;
+ polling-delay-passive = <0>;
+ thermal-sensors = <&lvts_ap 2>;
+ };
+ gpu2-thermal {
+ polling-delay = <0>;
+ polling-delay-passive = <0>;
+ thermal-sensors = <&lvts_ap 3>;
+ };
+ vdec-thermal {
+ polling-delay = <0>;
+ polling-delay-passive = <0>;
+ thermal-sensors = <&lvts_ap 4>;
+ };
+ img-thermal {
+ polling-delay = <0>;
+ polling-delay-passive = <0>;
+ thermal-sensors = <&lvts_ap 5>;
+ };
+ infra-thermal {
+ polling-delay = <0>;
+ polling-delay-passive = <0>;
+ thermal-sensors = <&lvts_ap 6>;
+ };
+ cam1-thermal {
+ polling-delay = <0>;
+ polling-delay-passive = <0>;
+ thermal-sensors = <&lvts_ap 7>;
+ };
+ cam2-thermal {
+ polling-delay = <0>;
+ polling-delay-passive = <0>;
+ thermal-sensors = <&lvts_ap 8>;
+ };
+ };
};
--
2.34.1

2022-08-04 15:40:46

by Krzysztof Kozlowski

Subject: Re: [PATCH v8.1, 6/7] arm64: dts: mt8195: Add thermal zone

On 04/08/2022 15:09, [email protected] wrote:
> From: Tinghan Shen <[email protected]>
>
> This adds the thermal zone for the mt8195.
>
> Signed-off-by: Tinghan Shen <[email protected]>
> Signed-off-by: Ben Tseng <[email protected]>
> Signed-off-by: Alexandre Bailon <[email protected]>
> Signed-off-by: Balsam CHIHI <[email protected]>
> ---
> arch/arm64/boot/dts/mediatek/mt8195.dtsi | 111 +++++++++++++++++++++++
> 1 file changed, 111 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/mediatek/mt8195.dtsi b/arch/arm64/boot/dts/mediatek/mt8195.dtsi
> index cbd0401968a2..5890e688eebe 100644
> --- a/arch/arm64/boot/dts/mediatek/mt8195.dtsi
> +++ b/arch/arm64/boot/dts/mediatek/mt8195.dtsi
> @@ -10,6 +10,7 @@
> #include <dt-bindings/interrupt-controller/irq.h>
> #include <dt-bindings/phy/phy.h>
> #include <dt-bindings/pinctrl/mt8195-pinfunc.h>
> +#include <dt-bindings/reset/mt8195-resets.h>
>
> / {
> compatible = "mediatek,mt8195";
> @@ -452,6 +453,28 @@ spi0: spi@1100a000 {
> status = "disabled";
> };
>
> + lvts_ap: thermal-sensor@1100b000 {
> + compatible = "mediatek,mt8195-lvts-ap";
> + #thermal-sensor-cells = <1>;
> + reg = <0 0x1100b000 0 0x1000>;
> + interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH 0>;
> + clocks = <&infracfg_ao CLK_INFRA_AO_THERM>;
> + resets = <&infracfg_ao MT8195_INFRA_RST0_THERM_CTRL_SWRST>;
> + nvmem-cells = <&lvts_efuse_data1 &lvts_efuse_data2>;
> + nvmem-cell-names = "lvts_calib_data1", "lvts_calib_data2";
> + };
> +
> + lvts_mcu: thermal-sensor@11278000 {
> + compatible = "mediatek,mt8195-lvts-mcu";
> + #thermal-sensor-cells = <1>;
> + reg = <0 0x11278000 0 0x1000>;
> + interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH 0>;
> + clocks = <&infracfg_ao CLK_INFRA_AO_THERM>;
> + resets = <&infracfg_ao MT8195_INFRA_RST4_THERM_CTRL_MCU_SWRST>;
> + nvmem-cells = <&lvts_efuse_data1 &lvts_efuse_data2>;
> + nvmem-cell-names = "lvts_calib_data1", "lvts_calib_data2";
> + };
> +
> spi1: spi@11010000 {
> compatible = "mediatek,mt8195-spi",
> "mediatek,mt6765-spi";
> @@ -1106,4 +1129,92 @@ vencsys_core1: clock-controller@1b000000 {
> #clock-cells = <1>;
> };
> };
> +
> + thermal_zones: thermal-zones {
> + cpu-big1-thermal {

Does this pass dtbs_check?

Best regards,
Krzysztof