2020-03-24 21:49:19

by Asutosh Das (asd)

[permalink] [raw]
Subject: [<PATCH v1> 1/1] scsi: ufs: Resume ufs host before accessing ufs device

From: Nitin Rawat <[email protected]>

As a part of sysfs reading of descriptors/attributes/flags,
query commands should only be executed when hba's
power runtime status is active.
To guarantee this, add pm_runtime_get/put_sync()
to those paths where query commands are sent.

Signed-off-by: Nitin Rawat <[email protected]>
Signed-off-by: Asutosh Das <[email protected]>
---
drivers/scsi/ufs/ufs-sysfs.c | 28 ++++++++++++++++++++++------
1 file changed, 22 insertions(+), 6 deletions(-)

diff --git a/drivers/scsi/ufs/ufs-sysfs.c b/drivers/scsi/ufs/ufs-sysfs.c
index dbdf8b0..92a63ee 100644
--- a/drivers/scsi/ufs/ufs-sysfs.c
+++ b/drivers/scsi/ufs/ufs-sysfs.c
@@ -210,8 +210,10 @@ static ssize_t ufs_sysfs_read_desc_param(struct ufs_hba *hba,
if (param_size > 8)
return -EINVAL;

+ pm_runtime_get_sync(hba->dev);
ret = ufshcd_read_desc_param(hba, desc_id, desc_index,
param_offset, desc_buf, param_size);
+ pm_runtime_put_sync(hba->dev);
if (ret)
return -EINVAL;
switch (param_size) {
@@ -558,6 +560,7 @@ static ssize_t _name##_show(struct device *dev, \
desc_buf = kzalloc(QUERY_DESC_MAX_SIZE, GFP_ATOMIC); \
if (!desc_buf) \
return -ENOMEM; \
+ pm_runtime_get_sync(hba->dev); \
ret = ufshcd_query_descriptor_retry(hba, \
UPIU_QUERY_OPCODE_READ_DESC, QUERY_DESC_IDN_DEVICE, \
0, 0, desc_buf, &desc_len); \
@@ -574,6 +577,7 @@ static ssize_t _name##_show(struct device *dev, \
goto out; \
ret = snprintf(buf, PAGE_SIZE, "%s\n", desc_buf); \
out: \
+ pm_runtime_put_sync(hba->dev); \
kfree(desc_buf); \
return ret; \
} \
@@ -604,9 +608,13 @@ static ssize_t _name##_show(struct device *dev, \
struct device_attribute *attr, char *buf) \
{ \
bool flag; \
+ int ret; \
struct ufs_hba *hba = dev_get_drvdata(dev); \
- if (ufshcd_query_flag(hba, UPIU_QUERY_OPCODE_READ_FLAG, \
- QUERY_FLAG_IDN##_uname, &flag)) \
+ pm_runtime_get_sync(hba->dev); \
+ ret = ufshcd_query_flag(hba, UPIU_QUERY_OPCODE_READ_FLAG, \
+ QUERY_FLAG_IDN##_uname, &flag); \
+ pm_runtime_put_sync(hba->dev); \
+ if (ret) \
return -EINVAL; \
return sprintf(buf, "%s\n", flag ? "true" : "false"); \
} \
@@ -644,8 +652,12 @@ static ssize_t _name##_show(struct device *dev, \
{ \
struct ufs_hba *hba = dev_get_drvdata(dev); \
u32 value; \
- if (ufshcd_query_attr(hba, UPIU_QUERY_OPCODE_READ_ATTR, \
- QUERY_ATTR_IDN##_uname, 0, 0, &value)) \
+ int ret; \
+ pm_runtime_get_sync(hba->dev); \
+ ret = ufshcd_query_attr(hba, UPIU_QUERY_OPCODE_READ_ATTR, \
+ QUERY_ATTR_IDN##_uname, 0, 0, &value); \
+ pm_runtime_put_sync(hba->dev); \
+ if (ret) \
return -EINVAL; \
return sprintf(buf, "0x%08X\n", value); \
} \
@@ -766,9 +778,13 @@ static ssize_t dyn_cap_needed_attribute_show(struct device *dev,
struct scsi_device *sdev = to_scsi_device(dev);
struct ufs_hba *hba = shost_priv(sdev->host);
u8 lun = ufshcd_scsi_to_upiu_lun(sdev->lun);
+ int ret;

- if (ufshcd_query_attr(hba, UPIU_QUERY_OPCODE_READ_ATTR,
- QUERY_ATTR_IDN_DYN_CAP_NEEDED, lun, 0, &value))
+ pm_runtime_get_sync(hba->dev);
+ ret = ufshcd_query_attr(hba, UPIU_QUERY_OPCODE_READ_ATTR,
+ QUERY_ATTR_IDN_DYN_CAP_NEEDED, lun, 0, &value);
+ pm_runtime_put_sync(hba->dev);
+ if (ret)
return -EINVAL;
return sprintf(buf, "0x%08X\n", value);
}
--
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, a Linux Foundation Collaborative Project.


2020-03-25 10:36:06

by Avri Altman

[permalink] [raw]
Subject: RE: [<PATCH v1> 1/1] scsi: ufs: Resume ufs host before accessing ufs device

>
> From: Nitin Rawat <[email protected]>
>
> As a part of sysfs reading of descriptors/attributes/flags,
> query commands should only be executed when hba's
> power runtime status is active.
> To guarantee this, add pm_runtime_get/put_sync()
> to those paths where query commands are sent.
>
> Signed-off-by: Nitin Rawat <[email protected]>
> Signed-off-by: Asutosh Das <[email protected]>
Reviewed-by: Avri Altman <[email protected]>

2020-03-27 02:13:23

by Martin K. Petersen

[permalink] [raw]
Subject: Re: [<PATCH v1> 1/1] scsi: ufs: Resume ufs host before accessing ufs device


Asutosh,

> As a part of sysfs reading of descriptors/attributes/flags, query
> commands should only be executed when hba's power runtime status is
> active. To guarantee this, add pm_runtime_get/put_sync() to those
> paths where query commands are sent.

Applied to 5.7/scsi-queue, thanks!

--
Martin K. Petersen Oracle Linux Engineering