J721S2 and J784S4 have a dedicated BCDMA controller for
Camera Serial Interface. Add the node for the DMA controllers
and keep it disabled by default.
The BCDMA instances were enabled/disabled and tested:
J721S2 : https://gist.github.com/vaishnavachath/4b9d7ec2ee1aad59a57d44cf28ed7eb0
J784S4 : https://gist.github.com/vaishnavachath/f928e4566aa80c7f47e7ac3c1491d62e
Vaishnav Achath (2):
arm64: dts: ti: k3-j721s2-main: Add BCDMA instance for CSI2RX
arm64: dts: ti: k3-j784s4-main: Add BCDMA instance for CSI2RX
arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi | 17 +++++++++++++++++
arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi | 17 +++++++++++++++++
2 files changed, 34 insertions(+)
--
2.17.1
J784S4 has a dedicated BCDMA controller for the Camera Serial Interface.
Events from the BCDMA controller instance are routed through the
main UDMA interrupt aggregator as unmapped events. Add the node for
the DMA controller and keep it disabled by default.
See J784S4 Technical Reference Manual (SPRUJ52)
for further details: http://www.ti.com/lit/zip/spruj52
Signed-off-by: Vaishnav Achath <[email protected]>
---
arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi | 17 +++++++++++++++++
1 file changed, 17 insertions(+)
diff --git a/arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi b/arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi
index efed2d683f63..a772f563c1ed 100644
--- a/arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi
@@ -703,6 +703,7 @@
ti,sci = <&sms>;
ti,sci-dev-id = <321>;
ti,interrupt-ranges = <0 0 256>;
+ ti,unmapped-event-sources = <&main_bcdma_csi>;
};
secure_proxy_main: mailbox@32c00000 {
@@ -1000,6 +1001,22 @@
ti,sci-rm-range-rflow = <0x00>; /* GP RFLOW */
};
+ main_bcdma_csi: dma-controller@311a0000 {
+ compatible = "ti,j721s2-dmss-bcdma-csi";
+ reg = <0x00 0x311a0000 0x00 0x100>,
+ <0x00 0x35d00000 0x00 0x20000>,
+ <0x00 0x35c00000 0x00 0x10000>,
+ <0x00 0x35e00000 0x00 0x80000>;
+ reg-names = "gcfg", "rchanrt", "tchanrt", "ringrt";
+ msi-parent = <&main_udmass_inta>;
+ #dma-cells = <3>;
+ ti,sci = <&sms>;
+ ti,sci-dev-id = <281>;
+ ti,sci-rm-range-rchan = <0x21>;
+ ti,sci-rm-range-tchan = <0x22>;
+ status = "disabled";
+ };
+
cpts@310d0000 {
compatible = "ti,j721e-cpts";
reg = <0x00 0x310d0000 0x00 0x400>;
--
2.17.1
J721S2 has a dedicated BCDMA controller for the Camera Serial Interface.
Events from the BCDMA controller instance are routed through the
main UDMA interrupt aggregator as unmapped events. Add the node for
the DMA controller and keep it disabled by default.
See J721S2 Technical Reference Manual (SPRUJ28)
for further details: http://www.ti.com/lit/pdf/spruj28
Signed-off-by: Vaishnav Achath <[email protected]>
---
arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi | 17 +++++++++++++++++
1 file changed, 17 insertions(+)
diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi b/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi
index 6d32544c8881..2a51a8d98c3c 100644
--- a/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi
@@ -807,6 +807,7 @@
ti,sci = <&sms>;
ti,sci-dev-id = <265>;
ti,interrupt-ranges = <0 0 256>;
+ ti,unmapped-event-sources = <&main_bcdma_csi>;
};
secure_proxy_main: mailbox@32c00000 {
@@ -1103,6 +1104,22 @@
ti,sci-rm-range-rflow = <0x00>; /* GP RFLOW */
};
+ main_bcdma_csi: dma-controller@311a0000 {
+ compatible = "ti,j721s2-dmss-bcdma-csi";
+ reg = <0x00 0x311a0000 0x00 0x100>,
+ <0x00 0x35d00000 0x00 0x20000>,
+ <0x00 0x35c00000 0x00 0x10000>,
+ <0x00 0x35e00000 0x00 0x80000>;
+ reg-names = "gcfg", "rchanrt", "tchanrt", "ringrt";
+ msi-parent = <&main_udmass_inta>;
+ #dma-cells = <3>;
+ ti,sci = <&sms>;
+ ti,sci-dev-id = <225>;
+ ti,sci-rm-range-rchan = <0x21>;
+ ti,sci-rm-range-tchan = <0x22>;
+ status = "disabled";
+ };
+
cpts@310d0000 {
compatible = "ti,j721e-cpts";
reg = <0x0 0x310d0000 0x0 0x400>;
--
2.17.1
Hello Vaishnav,
On 10/10/23 14:56, Vaishnav Achath wrote:
> J721S2 has a dedicated BCDMA controller for the Camera Serial Interface.
> Events from the BCDMA controller instance are routed through the
> main UDMA interrupt aggregator as unmapped events. Add the node for
> the DMA controller and keep it disabled by default.
>
> See J721S2 Technical Reference Manual (SPRUJ28)
> for further details: http://www.ti.com/lit/pdf/spruj28
>
> Signed-off-by: Vaishnav Achath <[email protected]>
> ---
> arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi | 17 +++++++++++++++++
> 1 file changed, 17 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi b/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi
> index 6d32544c8881..2a51a8d98c3c 100644
> --- a/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi
> +++ b/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi
> @@ -807,6 +807,7 @@
> ti,sci = <&sms>;
> ti,sci-dev-id = <265>;
> ti,interrupt-ranges = <0 0 256>;
> + ti,unmapped-event-sources = <&main_bcdma_csi>;
> };
>
> secure_proxy_main: mailbox@32c00000 {
> @@ -1103,6 +1104,22 @@
> ti,sci-rm-range-rflow = <0x00>; /* GP RFLOW */
> };
>
> + main_bcdma_csi: dma-controller@311a0000 {
> + compatible = "ti,j721s2-dmss-bcdma-csi";
> + reg = <0x00 0x311a0000 0x00 0x100>,
> + <0x00 0x35d00000 0x00 0x20000>,
> + <0x00 0x35c00000 0x00 0x10000>,
> + <0x00 0x35e00000 0x00 0x80000>;
Indentation is off here...
Same in patch 2/2..
> + reg-names = "gcfg", "rchanrt", "tchanrt", "ringrt";
> + msi-parent = <&main_udmass_inta>;
> + #dma-cells = <3>;
> + ti,sci = <&sms>;
> + ti,sci-dev-id = <225>;
> + ti,sci-rm-range-rchan = <0x21>;
> + ti,sci-rm-range-tchan = <0x22>;
> + status = "disabled";
> + };
> +
> cpts@310d0000 {
> compatible = "ti,j721e-cpts";
> reg = <0x0 0x310d0000 0x0 0x400>;