2021-01-26 10:24:35

by Guru Das Srinagesh

Subject: [RESEND PATCH v6 2/3] bindings: pm8941-misc: Add support for VBUS detection

Add interrupt support for reporting VBUS detection status that can be
detected via a dedicated PMIC pin.

Signed-off-by: Anirudh Ghayal <[email protected]>
Signed-off-by: Guru Das Srinagesh <[email protected]>
Reviewed-by: Rob Herring <[email protected]>
---
Documentation/devicetree/bindings/extcon/qcom,pm8941-misc.yaml | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/extcon/qcom,pm8941-misc.yaml b/Documentation/devicetree/bindings/extcon/qcom,pm8941-misc.yaml
index e8eea83..6a9c96f 100644
--- a/Documentation/devicetree/bindings/extcon/qcom,pm8941-misc.yaml
+++ b/Documentation/devicetree/bindings/extcon/qcom,pm8941-misc.yaml
@@ -22,11 +22,14 @@ properties:
maxItems: 1

interrupts:
- maxItems: 1
+ minItems: 1
+ maxItems: 2

interrupt-names:
+ minItems: 1
items:
- const: usb_id
+ - const: usb_vbus

required:
- compatible
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project

2021-02-25 01:14:28

by Chanwoo Choi

Subject: Re: [RESEND PATCH v6 2/3] bindings: pm8941-misc: Add support for VBUS detection

On 21. 1. 26. 오전 9:38, Guru Das Srinagesh wrote:
> Add interrupt support for reporting VBUS detection status that can be
> detected via a dedicated PMIC pin.
>
> Signed-off-by: Anirudh Ghayal <[email protected]>
> Signed-off-by: Guru Das Srinagesh <[email protected]>
> Reviewed-by: Rob Herring <[email protected]>
> ---
> Documentation/devicetree/bindings/extcon/qcom,pm8941-misc.yaml | 5 ++++-
> 1 file changed, 4 insertions(+), 1 deletion(-)
>
> diff --git a/Documentation/devicetree/bindings/extcon/qcom,pm8941-misc.yaml b/Documentation/devicetree/bindings/extcon/qcom,pm8941-misc.yaml
> index e8eea83..6a9c96f 100644
> --- a/Documentation/devicetree/bindings/extcon/qcom,pm8941-misc.yaml
> +++ b/Documentation/devicetree/bindings/extcon/qcom,pm8941-misc.yaml
> @@ -22,11 +22,14 @@ properties:
> maxItems: 1
>
> interrupts:
> - maxItems: 1
> + minItems: 1
> + maxItems: 2
>
> interrupt-names:
> + minItems: 1
> items:
> - const: usb_id
> + - const: usb_vbus
>
> required:
> - compatible
>

Applied it.

Thanks,
Chanwoo Choi