2021-07-14 02:58:04

by Yong Wu (吴勇)

[permalink] [raw]
Subject: [PATCH v6 00/11] Clean up "mediatek,larb"

MediaTek IOMMU block diagram always like below:

M4U
|
smi-common
|
-------------
| | ...
| |
larb1 larb2
| |
vdec venc

All the consumer connect with smi-larb, then connect with smi-common.

When the consumer works, it should enable the smi-larb's power which also
need enable the smi-common's power firstly.

Thus, Firstly, use the device link connect the consumer and the
smi-larbs. then add device link between the smi-larb and smi-common.

After adding the device_link, then "mediatek,larb" property can be removed.
the iommu consumer don't need call the mtk_smi_larb_get/put to enable
the power and clock of smi-larb and smi-common.

About the MM dt-binding/dtsi patches, I guess they should go together, thus
I don't split them for each a MM module and each a SoC.

Base on v5.14-rc1, and a jpeg[1] and mdp[2] patchset.

[1] https://lore.kernel.org/linux-mediatek/[email protected]/
[2] https://lore.kernel.org/linux-mediatek/[email protected]/

Change notes:
v6: 1) rebase on v5.14-rc1.
2) Fix the issue commented in v5 from Dafna and Hsin-Yi.
3) Remove the patches about using pm_runtime_resume_and_get since they have
already been merged by other patches.

v5: https://lore.kernel.org/linux-mediatek/[email protected]/
1) Base v5.12-rc2.
2) Remove changing the mtk-iommu to module_platform_driver patch, It have already been a
independent patch.

v4: https://lore.kernel.org/linux-mediatek/[email protected]/
base on v5.7-rc1.
1) Move drm PM patch before smi patchs.
2) Change builtin_platform_driver to module_platform_driver since we may need
build as module.
3) Rebase many patchset as above.

v3: https://lore.kernel.org/linux-iommu/[email protected]/
1) rebase on v5.3-rc1 and the latest mt8183 patchset.
2) Use device_is_bound to check whether the driver is ready from Matthias.
3) Add DL_FLAG_STATELESS flag when calling device_link_add and explain the
reason in the commit message[3/14].
4) Add a display patch[12/14] into this series. otherwise it may affect
display HW fastlogo even though it don't happen in mt8183.

v2: https://lore.kernel.org/linux-iommu/[email protected]/
1) rebase on v5.2-rc1.
2) Move adding device_link between the consumer and smi-larb into
iommu_add_device from Robin.
3) add DL_FLAG_AUTOREMOVE_CONSUMER even though the smi is built-in from Evan.
4) Remove the shutdown callback in iommu.

v1: https://lore.kernel.org/linux-iommu/[email protected]/

Yong Wu (10):
dt-binding: mediatek: Get rid of mediatek,larb for multimedia HW
iommu/mediatek: Add probe_defer for smi-larb
iommu/mediatek: Add device_link between the consumer and the larb
devices
media: mtk-jpeg: Get rid of mtk_smi_larb_get/put
media: mtk-mdp: Get rid of mtk_smi_larb_get/put
drm/mediatek: Get rid of mtk_smi_larb_get/put
media: mtk-vcodec: Get rid of mtk_smi_larb_get/put
memory: mtk-smi: Get rid of mtk_smi_larb_get/put
arm: dts: mediatek: Get rid of mediatek,larb for MM nodes
arm64: dts: mediatek: Get rid of mediatek,larb for MM nodes

Yongqiang Niu (1):
drm/mediatek: Add pm runtime support for ovl and rdma

.../display/mediatek/mediatek,disp.txt | 9 ----
.../bindings/media/mediatek-jpeg-decoder.yaml | 9 ----
.../bindings/media/mediatek-jpeg-encoder.yaml | 9 ----
.../bindings/media/mediatek-mdp.txt | 8 ----
.../bindings/media/mediatek-vcodec.txt | 4 --
arch/arm/boot/dts/mt2701.dtsi | 2 -
arch/arm/boot/dts/mt7623n.dtsi | 5 --
arch/arm64/boot/dts/mediatek/mt8173.dtsi | 16 -------
arch/arm64/boot/dts/mediatek/mt8183.dtsi | 6 ---
drivers/gpu/drm/mediatek/mtk_disp_ovl.c | 9 +++-
drivers/gpu/drm/mediatek/mtk_disp_rdma.c | 9 +++-
drivers/gpu/drm/mediatek/mtk_drm_crtc.c | 19 ++++----
drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c | 36 +--------------
drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h | 1 -
drivers/gpu/drm/mediatek/mtk_drm_drv.c | 5 +-
drivers/iommu/mtk_iommu.c | 24 +++++++++-
drivers/iommu/mtk_iommu_v1.c | 22 ++++++++-
.../media/platform/mtk-jpeg/mtk_jpeg_core.c | 45 +-----------------
.../media/platform/mtk-jpeg/mtk_jpeg_core.h | 2 -
drivers/media/platform/mtk-mdp/mtk_mdp_comp.c | 46 +------------------
drivers/media/platform/mtk-mdp/mtk_mdp_comp.h | 2 -
drivers/media/platform/mtk-mdp/mtk_mdp_core.c | 1 -
.../platform/mtk-vcodec/mtk_vcodec_dec_pm.c | 37 ++-------------
.../platform/mtk-vcodec/mtk_vcodec_drv.h | 3 --
.../platform/mtk-vcodec/mtk_vcodec_enc.c | 1 -
.../platform/mtk-vcodec/mtk_vcodec_enc_pm.c | 44 ++----------------
drivers/memory/mtk-smi.c | 14 ------
include/soc/mediatek/smi.h | 20 --------
28 files changed, 85 insertions(+), 323 deletions(-)

--
2.18.0



2021-07-14 02:58:10

by Yong Wu (吴勇)

[permalink] [raw]
Subject: [PATCH v6 02/11] iommu/mediatek: Add probe_defer for smi-larb

Prepare for adding device_link.

The iommu consumer should use device_link to connect with the
smi-larb(supplier). then the smi-larb should run before the iommu
consumer. Here we delay the iommu driver until the smi driver is
ready, then all the iommu consumer always is after the smi driver.

When there is no this patch, if some consumer drivers run before
smi-larb, the supplier link_status is DL_DEV_NO_DRIVER(0) in the
device_link_add, then device_links_driver_bound will use WARN_ON
to complain that the link_status of supplier is not right.

Signed-off-by: Yong Wu <[email protected]>
---
since [1], device_is_bound is not allowed to be EXPORT. It will
affect this driver built as module. thus still use dev.driver here.

[1] https://lore.kernel.org/patchwork/patch/1334670/
---
drivers/iommu/mtk_iommu.c | 2 +-
drivers/iommu/mtk_iommu_v1.c | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/iommu/mtk_iommu.c b/drivers/iommu/mtk_iommu.c
index 6f7c69688ce2..a02dde094788 100644
--- a/drivers/iommu/mtk_iommu.c
+++ b/drivers/iommu/mtk_iommu.c
@@ -855,7 +855,7 @@ static int mtk_iommu_probe(struct platform_device *pdev)
id = i;

plarbdev = of_find_device_by_node(larbnode);
- if (!plarbdev) {
+ if (!plarbdev || !plarbdev->dev.driver) {
of_node_put(larbnode);
return -EPROBE_DEFER;
}
diff --git a/drivers/iommu/mtk_iommu_v1.c b/drivers/iommu/mtk_iommu_v1.c
index 778e66f5f1aa..d9365a3d8dc9 100644
--- a/drivers/iommu/mtk_iommu_v1.c
+++ b/drivers/iommu/mtk_iommu_v1.c
@@ -594,7 +594,7 @@ static int mtk_iommu_probe(struct platform_device *pdev)
}

plarbdev = of_find_device_by_node(larbnode);
- if (!plarbdev) {
+ if (!plarbdev || !plarbdev->dev.driver) {
of_node_put(larbnode);
return -EPROBE_DEFER;
}
--
2.18.0

2021-07-14 02:58:22

by Yong Wu (吴勇)

[permalink] [raw]
Subject: [PATCH v6 03/11] iommu/mediatek: Add device_link between the consumer and the larb devices

MediaTek IOMMU-SMI diagram is like below. all the consumer connect with
smi-larb, then connect with smi-common.

M4U
|
smi-common
|
-------------
| | ...
| |
larb1 larb2
| |
vdec venc

When the consumer works, it should enable the smi-larb's power which
also need enable the smi-common's power firstly.

Thus, First of all, use the device link connect the consumer and the
smi-larbs. then add device link between the smi-larb and smi-common.

This patch adds device_link between the consumer and the larbs.

When device_link_add, I add the flag DL_FLAG_STATELESS to avoid calling
pm_runtime_xx to keep the original status of clocks. It can avoid two
issues:
1) Display HW show fastlogo abnormally reported in [1]. At the beggining,
all the clocks are enabled before entering kernel, but the clocks for
display HW(always in larb0) will be gated after clk_enable and clk_disable
called from device_link_add(->pm_runtime_resume) and rpm_idle. The clock
operation happened before display driver probe. At that time, the display
HW will be abnormal.

2) A deadlock issue reported in [2]. Use DL_FLAG_STATELESS to skip
pm_runtime_xx to avoid the deadlock.

Corresponding, DL_FLAG_AUTOREMOVE_CONSUMER can't be added, then
device_link_removed should be added explicitly.

[1] https://lore.kernel.org/linux-mediatek/1564213888.22908.4.camel@mhfsdcap03/
[2] https://lore.kernel.org/patchwork/patch/1086569/

Suggested-by: Tomasz Figa <[email protected]>
Signed-off-by: Yong Wu <[email protected]>
---
drivers/iommu/mtk_iommu.c | 22 ++++++++++++++++++++++
drivers/iommu/mtk_iommu_v1.c | 20 +++++++++++++++++++-
2 files changed, 41 insertions(+), 1 deletion(-)

diff --git a/drivers/iommu/mtk_iommu.c b/drivers/iommu/mtk_iommu.c
index a02dde094788..ee742900cf4b 100644
--- a/drivers/iommu/mtk_iommu.c
+++ b/drivers/iommu/mtk_iommu.c
@@ -571,22 +571,44 @@ static struct iommu_device *mtk_iommu_probe_device(struct device *dev)
{
struct iommu_fwspec *fwspec = dev_iommu_fwspec_get(dev);
struct mtk_iommu_data *data;
+ struct device_link *link;
+ struct device *larbdev;
+ unsigned int larbid;

if (!fwspec || fwspec->ops != &mtk_iommu_ops)
return ERR_PTR(-ENODEV); /* Not a iommu client device */

data = dev_iommu_priv_get(dev);

+ /*
+ * Link the consumer device with the smi-larb device(supplier)
+ * The device in each a larb is a independent HW. thus only link
+ * one larb here.
+ */
+ larbid = MTK_M4U_TO_LARB(fwspec->ids[0]);
+ larbdev = data->larb_imu[larbid].dev;
+ link = device_link_add(dev, larbdev,
+ DL_FLAG_PM_RUNTIME | DL_FLAG_STATELESS);
+ if (!link)
+ dev_err(dev, "Unable to link %s\n", dev_name(larbdev));
return &data->iommu;
}

static void mtk_iommu_release_device(struct device *dev)
{
struct iommu_fwspec *fwspec = dev_iommu_fwspec_get(dev);
+ struct mtk_iommu_data *data;
+ struct device *larbdev;
+ unsigned int larbid;

if (!fwspec || fwspec->ops != &mtk_iommu_ops)
return;

+ data = dev_iommu_priv_get(dev);
+ larbid = MTK_M4U_TO_LARB(fwspec->ids[0]);
+ larbdev = data->larb_imu[larbid].dev;
+ device_link_remove(dev, larbdev);
+
iommu_fwspec_free(dev);
}

diff --git a/drivers/iommu/mtk_iommu_v1.c b/drivers/iommu/mtk_iommu_v1.c
index d9365a3d8dc9..d2a7c66b8239 100644
--- a/drivers/iommu/mtk_iommu_v1.c
+++ b/drivers/iommu/mtk_iommu_v1.c
@@ -424,7 +424,9 @@ static struct iommu_device *mtk_iommu_probe_device(struct device *dev)
struct iommu_fwspec *fwspec = dev_iommu_fwspec_get(dev);
struct of_phandle_args iommu_spec;
struct mtk_iommu_data *data;
- int err, idx = 0;
+ int err, idx = 0, larbid;
+ struct device_link *link;
+ struct device *larbdev;

while (!of_parse_phandle_with_args(dev->of_node, "iommus",
"#iommu-cells",
@@ -445,6 +447,14 @@ static struct iommu_device *mtk_iommu_probe_device(struct device *dev)

data = dev_iommu_priv_get(dev);

+ /* Link the consumer device with the smi-larb device(supplier) */
+ larbid = mt2701_m4u_to_larb(fwspec->ids[0]);
+ larbdev = data->larb_imu[larbid].dev;
+ link = device_link_add(dev, larbdev,
+ DL_FLAG_PM_RUNTIME | DL_FLAG_STATELESS);
+ if (!link)
+ dev_err(dev, "Unable to link %s\n", dev_name(larbdev));
+
return &data->iommu;
}

@@ -465,10 +475,18 @@ static void mtk_iommu_probe_finalize(struct device *dev)
static void mtk_iommu_release_device(struct device *dev)
{
struct iommu_fwspec *fwspec = dev_iommu_fwspec_get(dev);
+ struct mtk_iommu_data *data;
+ struct device *larbdev;
+ unsigned int larbid;

if (!fwspec || fwspec->ops != &mtk_iommu_ops)
return;

+ data = dev_iommu_priv_get(dev);
+ larbid = mt2701_m4u_to_larb(fwspec->ids[0]);
+ larbdev = data->larb_imu[larbid].dev;
+ device_link_remove(dev, larbdev);
+
iommu_fwspec_free(dev);
}

--
2.18.0

2021-07-14 02:58:31

by Yong Wu (吴勇)

[permalink] [raw]
Subject: [PATCH v6 04/11] media: mtk-jpeg: Get rid of mtk_smi_larb_get/put

MediaTek IOMMU has already added device_link between the consumer
and smi-larb device. If the jpg device call the pm_runtime_get_sync,
the smi-larb's pm_runtime_get_sync also be called automatically.

After removing the larb_get operations, then mtk_jpeg_clk_init is
also unnecessary. Remove it too.

CC: Rick Chang <[email protected]>
CC: Xia Jiang <[email protected]>
Signed-off-by: Yong Wu <[email protected]>
Reviewed-by: Evan Green <[email protected]>
Acked-by: Rick Chang <[email protected]>
---
.../media/platform/mtk-jpeg/mtk_jpeg_core.c | 45 +------------------
.../media/platform/mtk-jpeg/mtk_jpeg_core.h | 2 -
2 files changed, 2 insertions(+), 45 deletions(-)

diff --git a/drivers/media/platform/mtk-jpeg/mtk_jpeg_core.c b/drivers/media/platform/mtk-jpeg/mtk_jpeg_core.c
index a89c7b206eef..4fea2c512434 100644
--- a/drivers/media/platform/mtk-jpeg/mtk_jpeg_core.c
+++ b/drivers/media/platform/mtk-jpeg/mtk_jpeg_core.c
@@ -22,7 +22,6 @@
#include <media/v4l2-ioctl.h>
#include <media/videobuf2-core.h>
#include <media/videobuf2-dma-contig.h>
-#include <soc/mediatek/smi.h>

#include "mtk_jpeg_enc_hw.h"
#include "mtk_jpeg_dec_hw.h"
@@ -1055,10 +1054,6 @@ static void mtk_jpeg_clk_on(struct mtk_jpeg_dev *jpeg)
{
int ret;

- ret = mtk_smi_larb_get(jpeg->larb);
- if (ret)
- dev_err(jpeg->dev, "mtk_smi_larb_get larbvdec fail %d\n", ret);
-
ret = clk_bulk_prepare_enable(jpeg->variant->num_clks,
jpeg->variant->clks);
if (ret)
@@ -1069,7 +1064,6 @@ static void mtk_jpeg_clk_off(struct mtk_jpeg_dev *jpeg)
{
clk_bulk_disable_unprepare(jpeg->variant->num_clks,
jpeg->variant->clks);
- mtk_smi_larb_put(jpeg->larb);
}

static irqreturn_t mtk_jpeg_enc_done(struct mtk_jpeg_dev *jpeg)
@@ -1284,35 +1278,6 @@ static struct clk_bulk_data mtk_jpeg_clocks[] = {
{ .id = "jpgenc" },
};

-static int mtk_jpeg_clk_init(struct mtk_jpeg_dev *jpeg)
-{
- struct device_node *node;
- struct platform_device *pdev;
- int ret;
-
- node = of_parse_phandle(jpeg->dev->of_node, "mediatek,larb", 0);
- if (!node)
- return -EINVAL;
- pdev = of_find_device_by_node(node);
- if (WARN_ON(!pdev)) {
- of_node_put(node);
- return -EINVAL;
- }
- of_node_put(node);
-
- jpeg->larb = &pdev->dev;
-
- ret = devm_clk_bulk_get(jpeg->dev, jpeg->variant->num_clks,
- jpeg->variant->clks);
- if (ret) {
- dev_err(&pdev->dev, "failed to get jpeg clock:%d\n", ret);
- put_device(&pdev->dev);
- return ret;
- }
-
- return 0;
-}
-
static void mtk_jpeg_job_timeout_work(struct work_struct *work)
{
struct mtk_jpeg_dev *jpeg = container_of(work, struct mtk_jpeg_dev,
@@ -1333,11 +1298,6 @@ static void mtk_jpeg_job_timeout_work(struct work_struct *work)
v4l2_m2m_job_finish(jpeg->m2m_dev, ctx->fh.m2m_ctx);
}

-static inline void mtk_jpeg_clk_release(struct mtk_jpeg_dev *jpeg)
-{
- put_device(jpeg->larb);
-}
-
static int mtk_jpeg_probe(struct platform_device *pdev)
{
struct mtk_jpeg_dev *jpeg;
@@ -1376,7 +1336,8 @@ static int mtk_jpeg_probe(struct platform_device *pdev)
goto err_req_irq;
}

- ret = mtk_jpeg_clk_init(jpeg);
+ ret = devm_clk_bulk_get(jpeg->dev, jpeg->variant->num_clks,
+ jpeg->variant->clks);
if (ret) {
dev_err(&pdev->dev, "Failed to init clk, err %d\n", ret);
goto err_clk_init;
@@ -1442,7 +1403,6 @@ static int mtk_jpeg_probe(struct platform_device *pdev)
v4l2_device_unregister(&jpeg->v4l2_dev);

err_dev_register:
- mtk_jpeg_clk_release(jpeg);

err_clk_init:

@@ -1460,7 +1420,6 @@ static int mtk_jpeg_remove(struct platform_device *pdev)
video_device_release(jpeg->vdev);
v4l2_m2m_release(jpeg->m2m_dev);
v4l2_device_unregister(&jpeg->v4l2_dev);
- mtk_jpeg_clk_release(jpeg);

return 0;
}
diff --git a/drivers/media/platform/mtk-jpeg/mtk_jpeg_core.h b/drivers/media/platform/mtk-jpeg/mtk_jpeg_core.h
index 595f7f10c9fd..3e4811a41ba2 100644
--- a/drivers/media/platform/mtk-jpeg/mtk_jpeg_core.h
+++ b/drivers/media/platform/mtk-jpeg/mtk_jpeg_core.h
@@ -85,7 +85,6 @@ struct mtk_jpeg_variant {
* @alloc_ctx: videobuf2 memory allocator's context
* @vdev: video device node for jpeg mem2mem mode
* @reg_base: JPEG registers mapping
- * @larb: SMI device
* @job_timeout_work: IRQ timeout structure
* @variant: driver variant to be used
*/
@@ -99,7 +98,6 @@ struct mtk_jpeg_dev {
void *alloc_ctx;
struct video_device *vdev;
void __iomem *reg_base;
- struct device *larb;
struct delayed_work job_timeout_work;
const struct mtk_jpeg_variant *variant;
};
--
2.18.0

2021-07-14 02:58:37

by Yong Wu (吴勇)

[permalink] [raw]
Subject: [PATCH v6 05/11] media: mtk-mdp: Get rid of mtk_smi_larb_get/put

MediaTek IOMMU has already added the device_link between the consumer
and smi-larb device. If the mdp device call the pm_runtime_get_sync,
the smi-larb's pm_runtime_get_sync also be called automatically.

CC: Minghsiu Tsai <[email protected]>
CC: Houlong Wei <[email protected]>
Signed-off-by: Yong Wu <[email protected]>
Reviewed-by: Evan Green <[email protected]>
Reviewed-by: Houlong Wei <[email protected]>
---
drivers/media/platform/mtk-mdp/mtk_mdp_comp.c | 46 +------------------
drivers/media/platform/mtk-mdp/mtk_mdp_comp.h | 2 -
drivers/media/platform/mtk-mdp/mtk_mdp_core.c | 1 -
3 files changed, 1 insertion(+), 48 deletions(-)

diff --git a/drivers/media/platform/mtk-mdp/mtk_mdp_comp.c b/drivers/media/platform/mtk-mdp/mtk_mdp_comp.c
index de2d425efdd1..5e0ea83a9f7f 100644
--- a/drivers/media/platform/mtk-mdp/mtk_mdp_comp.c
+++ b/drivers/media/platform/mtk-mdp/mtk_mdp_comp.c
@@ -13,7 +13,6 @@
#include <linux/of.h>
#include <linux/of_irq.h>
#include <linux/of_platform.h>
-#include <soc/mediatek/smi.h>
#include <linux/pm_runtime.h>

#include "mtk_mdp_comp.h"
@@ -57,13 +56,6 @@ int mtk_mdp_comp_power_on(struct mtk_mdp_comp *comp)
{
int status, err;

- if (comp->larb_dev) {
- err = mtk_smi_larb_get(comp->larb_dev);
- if (err)
- dev_err(comp->dev,
- "failed to get larb, err %d.\n", err);
- }
-
err = pm_runtime_get_sync(comp->dev);
if (err < 0) {
dev_err(comp->dev, "failed to runtime get, err %d.\n", err);
@@ -146,9 +138,6 @@ void mtk_mdp_comp_clock_off(struct mtk_mdp_comp *comp)
continue;
clk_disable_unprepare(comp->clk[i]);
}
-
- if (comp->larb_dev)
- mtk_smi_larb_put(comp->larb_dev);
}

/*
@@ -236,9 +225,6 @@ static const struct component_ops mtk_mdp_component_ops = {

int mtk_mdp_comp_init(struct mtk_mdp_comp *comp, struct device *dev)
{
- struct device_node *larb_node;
- struct platform_device *larb_pdev;
- int ret;
int i;
struct device_node *node = dev->of_node;
enum mtk_mdp_comp_type comp_type =
@@ -252,8 +238,7 @@ int mtk_mdp_comp_init(struct mtk_mdp_comp *comp, struct device *dev)
if (IS_ERR(comp->clk[i])) {
if (PTR_ERR(comp->clk[i]) != -EPROBE_DEFER)
dev_err(dev, "Failed to get clock\n");
- ret = PTR_ERR(comp->clk[i]);
- goto err;
+ return PTR_ERR(comp->clk[i]);
}

/* Only RDMA needs two clocks */
@@ -261,36 +246,7 @@ int mtk_mdp_comp_init(struct mtk_mdp_comp *comp, struct device *dev)
break;
}

- /* Only DMA capable components need the LARB property */
- comp->larb_dev = NULL;
- if (comp_type != MTK_MDP_RDMA &&
- comp_type != MTK_MDP_WDMA &&
- comp_type != MTK_MDP_WROT)
- return 0;
-
- larb_node = of_parse_phandle(node, "mediatek,larb", 0);
- if (!larb_node) {
- dev_err(dev,
- "Missing mediadek,larb phandle in %pOF node\n", node);
- ret = -EINVAL;
- goto err;
- }
-
- larb_pdev = of_find_device_by_node(larb_node);
- if (!larb_pdev) {
- dev_warn(dev, "Waiting for larb device %pOF\n", larb_node);
- of_node_put(larb_node);
- ret = -EPROBE_DEFER;
- goto err;
- }
- of_node_put(larb_node);
-
- comp->larb_dev = &larb_pdev->dev;
-
return 0;
-
-err:
- return ret;
}

static int mtk_mdp_comp_probe(struct platform_device *pdev)
diff --git a/drivers/media/platform/mtk-mdp/mtk_mdp_comp.h b/drivers/media/platform/mtk-mdp/mtk_mdp_comp.h
index 5201c47f7baa..2bd229cc7eae 100644
--- a/drivers/media/platform/mtk-mdp/mtk_mdp_comp.h
+++ b/drivers/media/platform/mtk-mdp/mtk_mdp_comp.h
@@ -11,13 +11,11 @@
* struct mtk_mdp_comp - the MDP's function component data
* @node: list node to track sibing MDP components
* @clk: clocks required for component
- * @larb_dev: SMI device required for component
* @dev: component's device
*/
struct mtk_mdp_comp {
struct list_head node;
struct clk *clk[2];
- struct device *larb_dev;
struct device *dev;
};

diff --git a/drivers/media/platform/mtk-mdp/mtk_mdp_core.c b/drivers/media/platform/mtk-mdp/mtk_mdp_core.c
index e1fb39231248..be7d35b3e3ff 100644
--- a/drivers/media/platform/mtk-mdp/mtk_mdp_core.c
+++ b/drivers/media/platform/mtk-mdp/mtk_mdp_core.c
@@ -18,7 +18,6 @@
#include <linux/platform_device.h>
#include <linux/pm_runtime.h>
#include <linux/workqueue.h>
-#include <soc/mediatek/smi.h>

#include "mtk_mdp_comp.h"
#include "mtk_mdp_core.h"
--
2.18.0

2021-07-14 02:58:54

by Yong Wu (吴勇)

[permalink] [raw]
Subject: [PATCH v6 06/11] drm/mediatek: Add pm runtime support for ovl and rdma

From: Yongqiang Niu <[email protected]>

Prepare for smi cleaning up "mediatek,larb".

Display use the dispsys device to call pm_rumtime_get_sync before.
This patch add pm_runtime_xx with ovl and rdma device whose nodes has
"iommus" property, then display could help pm_runtime_get for smi via
ovl or rdma device.

CC: CK Hu <[email protected]>
Signed-off-by: Yongqiang Niu <[email protected]>
Signed-off-by: Yong Wu <[email protected]>
(Yong: Use pm_runtime_resume_and_get instead of pm_runtime_get_sync)
Acked-by: Chun-Kuang Hu <[email protected]>
---
drivers/gpu/drm/mediatek/mtk_disp_ovl.c | 9 ++++++++-
drivers/gpu/drm/mediatek/mtk_disp_rdma.c | 9 ++++++++-
drivers/gpu/drm/mediatek/mtk_drm_crtc.c | 12 +++++++++++-
3 files changed, 27 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/mediatek/mtk_disp_ovl.c b/drivers/gpu/drm/mediatek/mtk_disp_ovl.c
index fa9d79963cd3..ea5760f856ec 100644
--- a/drivers/gpu/drm/mediatek/mtk_disp_ovl.c
+++ b/drivers/gpu/drm/mediatek/mtk_disp_ovl.c
@@ -11,6 +11,7 @@
#include <linux/of_device.h>
#include <linux/of_irq.h>
#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
#include <linux/soc/mediatek/mtk-cmdq.h>

#include "mtk_disp_drv.h"
@@ -414,15 +415,21 @@ static int mtk_disp_ovl_probe(struct platform_device *pdev)
return ret;
}

+ pm_runtime_enable(dev);
+
ret = component_add(dev, &mtk_disp_ovl_component_ops);
- if (ret)
+ if (ret) {
+ pm_runtime_disable(dev);
dev_err(dev, "Failed to add component: %d\n", ret);
+ }

return ret;
}

static int mtk_disp_ovl_remove(struct platform_device *pdev)
{
+ pm_runtime_disable(&pdev->dev);
+
return 0;
}

diff --git a/drivers/gpu/drm/mediatek/mtk_disp_rdma.c b/drivers/gpu/drm/mediatek/mtk_disp_rdma.c
index 705f28ceb4dd..0f31d1c8e37c 100644
--- a/drivers/gpu/drm/mediatek/mtk_disp_rdma.c
+++ b/drivers/gpu/drm/mediatek/mtk_disp_rdma.c
@@ -9,6 +9,7 @@
#include <linux/of_device.h>
#include <linux/of_irq.h>
#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
#include <linux/soc/mediatek/mtk-cmdq.h>

#include "mtk_disp_drv.h"
@@ -327,9 +328,13 @@ static int mtk_disp_rdma_probe(struct platform_device *pdev)

platform_set_drvdata(pdev, priv);

+ pm_runtime_enable(dev);
+
ret = component_add(dev, &mtk_disp_rdma_component_ops);
- if (ret)
+ if (ret) {
+ pm_runtime_disable(dev);
dev_err(dev, "Failed to add component: %d\n", ret);
+ }

return ret;
}
@@ -338,6 +343,8 @@ static int mtk_disp_rdma_remove(struct platform_device *pdev)
{
component_del(&pdev->dev, &mtk_disp_rdma_component_ops);

+ pm_runtime_disable(&pdev->dev);
+
return 0;
}

diff --git a/drivers/gpu/drm/mediatek/mtk_drm_crtc.c b/drivers/gpu/drm/mediatek/mtk_drm_crtc.c
index 474efb844249..08e3f352377d 100644
--- a/drivers/gpu/drm/mediatek/mtk_drm_crtc.c
+++ b/drivers/gpu/drm/mediatek/mtk_drm_crtc.c
@@ -557,9 +557,15 @@ static void mtk_drm_crtc_atomic_enable(struct drm_crtc *crtc,
return;
}

+ ret = pm_runtime_resume_and_get(comp->dev);
+ if (ret < 0)
+ DRM_DEV_ERROR(comp->dev, "Failed to enable power domain: %d\n",
+ ret);
+
ret = mtk_crtc_ddp_hw_init(mtk_crtc);
if (ret) {
mtk_smi_larb_put(comp->larb_dev);
+ pm_runtime_put(comp->dev);
return;
}

@@ -572,7 +578,7 @@ static void mtk_drm_crtc_atomic_disable(struct drm_crtc *crtc,
{
struct mtk_drm_crtc *mtk_crtc = to_mtk_crtc(crtc);
struct mtk_ddp_comp *comp = mtk_crtc->ddp_comp[0];
- int i;
+ int i, ret;

DRM_DEBUG_DRIVER("%s %d\n", __func__, crtc->base.id);
if (!mtk_crtc->enabled)
@@ -596,6 +602,10 @@ static void mtk_drm_crtc_atomic_disable(struct drm_crtc *crtc,
drm_crtc_vblank_off(crtc);
mtk_crtc_ddp_hw_fini(mtk_crtc);
mtk_smi_larb_put(comp->larb_dev);
+ ret = pm_runtime_put(comp->dev);
+ if (ret < 0)
+ DRM_DEV_ERROR(comp->dev, "Failed to disable power domain: %d\n",
+ ret);

mtk_crtc->enabled = false;
}
--
2.18.0

2021-07-14 02:59:22

by Yong Wu (吴勇)

[permalink] [raw]
Subject: [PATCH v6 09/11] memory: mtk-smi: Get rid of mtk_smi_larb_get/put

After adding device_link between the iommu consumer and smi-larb,
the pm_runtime_get(_sync) of smi-larb and smi-common will be called
automatically. we can get rid of mtk_smi_larb_get/put.

CC: Matthias Brugger <[email protected]>
Signed-off-by: Yong Wu <[email protected]>
Reviewed-by: Evan Green <[email protected]>
Acked-by: Krzysztof Kozlowski <[email protected]>
Acked-by: Matthias Brugger <[email protected]>
---
drivers/memory/mtk-smi.c | 14 --------------
include/soc/mediatek/smi.h | 20 --------------------
2 files changed, 34 deletions(-)

diff --git a/drivers/memory/mtk-smi.c b/drivers/memory/mtk-smi.c
index c5fb51f73b34..7c61c924e220 100644
--- a/drivers/memory/mtk-smi.c
+++ b/drivers/memory/mtk-smi.c
@@ -134,20 +134,6 @@ static void mtk_smi_clk_disable(const struct mtk_smi *smi)
clk_disable_unprepare(smi->clk_apb);
}

-int mtk_smi_larb_get(struct device *larbdev)
-{
- int ret = pm_runtime_resume_and_get(larbdev);
-
- return (ret < 0) ? ret : 0;
-}
-EXPORT_SYMBOL_GPL(mtk_smi_larb_get);
-
-void mtk_smi_larb_put(struct device *larbdev)
-{
- pm_runtime_put_sync(larbdev);
-}
-EXPORT_SYMBOL_GPL(mtk_smi_larb_put);
-
static int
mtk_smi_larb_bind(struct device *dev, struct device *master, void *data)
{
diff --git a/include/soc/mediatek/smi.h b/include/soc/mediatek/smi.h
index 15e3397cec58..11f7d6b59642 100644
--- a/include/soc/mediatek/smi.h
+++ b/include/soc/mediatek/smi.h
@@ -19,26 +19,6 @@ struct mtk_smi_larb_iommu {
unsigned char bank[32];
};

-/*
- * mtk_smi_larb_get: Enable the power domain and clocks for this local arbiter.
- * It also initialize some basic setting(like iommu).
- * mtk_smi_larb_put: Disable the power domain and clocks for this local arbiter.
- * Both should be called in non-atomic context.
- *
- * Returns 0 if successful, negative on failure.
- */
-int mtk_smi_larb_get(struct device *larbdev);
-void mtk_smi_larb_put(struct device *larbdev);
-
-#else
-
-static inline int mtk_smi_larb_get(struct device *larbdev)
-{
- return 0;
-}
-
-static inline void mtk_smi_larb_put(struct device *larbdev) { }
-
#endif

#endif
--
2.18.0

2021-07-14 02:59:29

by Yong Wu (吴勇)

[permalink] [raw]
Subject: [PATCH v6 10/11] arm: dts: mediatek: Get rid of mediatek,larb for MM nodes

After adding device_link between the IOMMU consumer and smi,
the mediatek,larb is unnecessary now.

CC: Matthias Brugger <[email protected]>
Signed-off-by: Yong Wu <[email protected]>
Reviewed-by: Evan Green <[email protected]>
---
arch/arm/boot/dts/mt2701.dtsi | 2 --
arch/arm/boot/dts/mt7623n.dtsi | 5 -----
2 files changed, 7 deletions(-)

diff --git a/arch/arm/boot/dts/mt2701.dtsi b/arch/arm/boot/dts/mt2701.dtsi
index 4776f85d6d5b..ef583cfd3baf 100644
--- a/arch/arm/boot/dts/mt2701.dtsi
+++ b/arch/arm/boot/dts/mt2701.dtsi
@@ -564,7 +564,6 @@
clock-names = "jpgdec-smi",
"jpgdec";
power-domains = <&scpsys MT2701_POWER_DOMAIN_ISP>;
- mediatek,larb = <&larb2>;
iommus = <&iommu MT2701_M4U_PORT_JPGDEC_WDMA>,
<&iommu MT2701_M4U_PORT_JPGDEC_BSDMA>;
};
@@ -577,7 +576,6 @@
clocks = <&imgsys CLK_IMG_VENC>;
clock-names = "jpgenc";
power-domains = <&scpsys MT2701_POWER_DOMAIN_ISP>;
- mediatek,larb = <&larb2>;
iommus = <&iommu MT2701_M4U_PORT_JPGENC_RDMA>,
<&iommu MT2701_M4U_PORT_JPGENC_BSDMA>;
};
diff --git a/arch/arm/boot/dts/mt7623n.dtsi b/arch/arm/boot/dts/mt7623n.dtsi
index bcb0846e29fd..3adab5cd1fef 100644
--- a/arch/arm/boot/dts/mt7623n.dtsi
+++ b/arch/arm/boot/dts/mt7623n.dtsi
@@ -121,7 +121,6 @@
clock-names = "jpgdec-smi",
"jpgdec";
power-domains = <&scpsys MT2701_POWER_DOMAIN_ISP>;
- mediatek,larb = <&larb2>;
iommus = <&iommu MT2701_M4U_PORT_JPGDEC_WDMA>,
<&iommu MT2701_M4U_PORT_JPGDEC_BSDMA>;
};
@@ -144,7 +143,6 @@
interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_LOW>;
clocks = <&mmsys CLK_MM_DISP_OVL>;
iommus = <&iommu MT2701_M4U_PORT_DISP_OVL_0>;
- mediatek,larb = <&larb0>;
};

rdma0: rdma@14008000 {
@@ -154,7 +152,6 @@
interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_LOW>;
clocks = <&mmsys CLK_MM_DISP_RDMA>;
iommus = <&iommu MT2701_M4U_PORT_DISP_RDMA>;
- mediatek,larb = <&larb0>;
};

wdma@14009000 {
@@ -164,7 +161,6 @@
interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_LOW>;
clocks = <&mmsys CLK_MM_DISP_WDMA>;
iommus = <&iommu MT2701_M4U_PORT_DISP_WDMA>;
- mediatek,larb = <&larb0>;
};

bls: pwm@1400a000 {
@@ -215,7 +211,6 @@
interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_LOW>;
clocks = <&mmsys CLK_MM_DISP_RDMA1>;
iommus = <&iommu MT2701_M4U_PORT_DISP_RDMA1>;
- mediatek,larb = <&larb0>;
};

dpi0: dpi@14014000 {
--
2.18.0

2021-07-14 02:59:45

by Yong Wu (吴勇)

[permalink] [raw]
Subject: [PATCH v6 08/11] media: mtk-vcodec: Get rid of mtk_smi_larb_get/put

MediaTek IOMMU has already added the device_link between the consumer
and smi-larb device. If the vcodec device call the pm_runtime_get_sync,
the smi-larb's pm_runtime_get_sync also be called automatically.

CC: Tiffany Lin <[email protected]>
CC: Irui Wang <[email protected]>
Signed-off-by: Yong Wu <[email protected]>
Reviewed-by: Evan Green <[email protected]>
Acked-by: Tiffany Lin <[email protected]>
---
.../platform/mtk-vcodec/mtk_vcodec_dec_pm.c | 37 +++-------------
.../platform/mtk-vcodec/mtk_vcodec_drv.h | 3 --
.../platform/mtk-vcodec/mtk_vcodec_enc.c | 1 -
.../platform/mtk-vcodec/mtk_vcodec_enc_pm.c | 44 +++----------------
4 files changed, 10 insertions(+), 75 deletions(-)

diff --git a/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_pm.c b/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_pm.c
index 6038db96f71c..d0bf9aa3b29d 100644
--- a/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_pm.c
+++ b/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_pm.c
@@ -8,14 +8,12 @@
#include <linux/of_address.h>
#include <linux/of_platform.h>
#include <linux/pm_runtime.h>
-#include <soc/mediatek/smi.h>

#include "mtk_vcodec_dec_pm.h"
#include "mtk_vcodec_util.h"

int mtk_vcodec_init_dec_pm(struct mtk_vcodec_dev *mtkdev)
{
- struct device_node *node;
struct platform_device *pdev;
struct mtk_vcodec_pm *pm;
struct mtk_vcodec_clk *dec_clk;
@@ -26,18 +24,7 @@ int mtk_vcodec_init_dec_pm(struct mtk_vcodec_dev *mtkdev)
pm = &mtkdev->pm;
pm->mtkdev = mtkdev;
dec_clk = &pm->vdec_clk;
- node = of_parse_phandle(pdev->dev.of_node, "mediatek,larb", 0);
- if (!node) {
- mtk_v4l2_err("of_parse_phandle mediatek,larb fail!");
- return -1;
- }

- pdev = of_find_device_by_node(node);
- of_node_put(node);
- if (WARN_ON(!pdev)) {
- return -1;
- }
- pm->larbvdec = &pdev->dev;
pdev = mtkdev->plat_dev;
pm->dev = &pdev->dev;

@@ -47,14 +34,11 @@ int mtk_vcodec_init_dec_pm(struct mtk_vcodec_dev *mtkdev)
dec_clk->clk_info = devm_kcalloc(&pdev->dev,
dec_clk->clk_num, sizeof(*clk_info),
GFP_KERNEL);
- if (!dec_clk->clk_info) {
- ret = -ENOMEM;
- goto put_device;
- }
+ if (!dec_clk->clk_info)
+ return -ENOMEM;
} else {
mtk_v4l2_err("Failed to get vdec clock count");
- ret = -EINVAL;
- goto put_device;
+ return -EINVAL;
}

for (i = 0; i < dec_clk->clk_num; i++) {
@@ -63,29 +47,24 @@ int mtk_vcodec_init_dec_pm(struct mtk_vcodec_dev *mtkdev)
"clock-names", i, &clk_info->clk_name);
if (ret) {
mtk_v4l2_err("Failed to get clock name id = %d", i);
- goto put_device;
+ return ret;
}
clk_info->vcodec_clk = devm_clk_get(&pdev->dev,
clk_info->clk_name);
if (IS_ERR(clk_info->vcodec_clk)) {
mtk_v4l2_err("devm_clk_get (%d)%s fail", i,
clk_info->clk_name);
- ret = PTR_ERR(clk_info->vcodec_clk);
- goto put_device;
+ return PTR_ERR(clk_info->vcodec_clk);
}
}

pm_runtime_enable(&pdev->dev);
return 0;
-put_device:
- put_device(pm->larbvdec);
- return ret;
}

void mtk_vcodec_release_dec_pm(struct mtk_vcodec_dev *dev)
{
pm_runtime_disable(dev->pm.dev);
- put_device(dev->pm.larbvdec);
}

int mtk_vcodec_dec_pw_on(struct mtk_vcodec_pm *pm)
@@ -122,11 +101,6 @@ void mtk_vcodec_dec_clock_on(struct mtk_vcodec_pm *pm)
}
}

- ret = mtk_smi_larb_get(pm->larbvdec);
- if (ret) {
- mtk_v4l2_err("mtk_smi_larb_get larbvdec fail %d", ret);
- goto error;
- }
return;

error:
@@ -139,7 +113,6 @@ void mtk_vcodec_dec_clock_off(struct mtk_vcodec_pm *pm)
struct mtk_vcodec_clk *dec_clk = &pm->vdec_clk;
int i = 0;

- mtk_smi_larb_put(pm->larbvdec);
for (i = dec_clk->clk_num - 1; i >= 0; i--)
clk_disable_unprepare(dec_clk->clk_info[i].vcodec_clk);
}
diff --git a/drivers/media/platform/mtk-vcodec/mtk_vcodec_drv.h b/drivers/media/platform/mtk-vcodec/mtk_vcodec_drv.h
index c6c7672fecfb..64b73dd880ce 100644
--- a/drivers/media/platform/mtk-vcodec/mtk_vcodec_drv.h
+++ b/drivers/media/platform/mtk-vcodec/mtk_vcodec_drv.h
@@ -189,10 +189,7 @@ struct mtk_vcodec_clk {
*/
struct mtk_vcodec_pm {
struct mtk_vcodec_clk vdec_clk;
- struct device *larbvdec;
-
struct mtk_vcodec_clk venc_clk;
- struct device *larbvenc;
struct device *dev;
struct mtk_vcodec_dev *mtkdev;
};
diff --git a/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc.c b/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc.c
index 416f356af363..9a1515cf862d 100644
--- a/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc.c
+++ b/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc.c
@@ -8,7 +8,6 @@
#include <media/v4l2-event.h>
#include <media/v4l2-mem2mem.h>
#include <media/videobuf2-dma-contig.h>
-#include <soc/mediatek/smi.h>
#include <linux/pm_runtime.h>

#include "mtk_vcodec_drv.h"
diff --git a/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc_pm.c b/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc_pm.c
index 1b2e4930ed27..dffb190267ed 100644
--- a/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc_pm.c
+++ b/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc_pm.c
@@ -8,58 +8,36 @@
#include <linux/of_address.h>
#include <linux/of_platform.h>
#include <linux/pm_runtime.h>
-#include <soc/mediatek/smi.h>

#include "mtk_vcodec_enc_pm.h"
#include "mtk_vcodec_util.h"

int mtk_vcodec_init_enc_pm(struct mtk_vcodec_dev *mtkdev)
{
- struct device_node *node;
struct platform_device *pdev;
struct mtk_vcodec_pm *pm;
struct mtk_vcodec_clk *enc_clk;
struct mtk_vcodec_clk_info *clk_info;
int ret = 0, i = 0;
- struct device *dev;

pdev = mtkdev->plat_dev;
pm = &mtkdev->pm;
memset(pm, 0, sizeof(struct mtk_vcodec_pm));
pm->mtkdev = mtkdev;
pm->dev = &pdev->dev;
- dev = &pdev->dev;
enc_clk = &pm->venc_clk;

- node = of_parse_phandle(dev->of_node, "mediatek,larb", 0);
- if (!node) {
- mtk_v4l2_err("no mediatek,larb found");
- return -ENODEV;
- }
- pdev = of_find_device_by_node(node);
- of_node_put(node);
- if (!pdev) {
- mtk_v4l2_err("no mediatek,larb device found");
- return -ENODEV;
- }
- pm->larbvenc = &pdev->dev;
- pdev = mtkdev->plat_dev;
- pm->dev = &pdev->dev;
-
enc_clk->clk_num = of_property_count_strings(pdev->dev.of_node,
"clock-names");
if (enc_clk->clk_num > 0) {
enc_clk->clk_info = devm_kcalloc(&pdev->dev,
enc_clk->clk_num, sizeof(*clk_info),
GFP_KERNEL);
- if (!enc_clk->clk_info) {
- ret = -ENOMEM;
- goto put_larbvenc;
- }
+ if (!enc_clk->clk_info)
+ return -ENOMEM;
} else {
mtk_v4l2_err("Failed to get venc clock count");
- ret = -EINVAL;
- goto put_larbvenc;
+ return -EINVAL;
}

for (i = 0; i < enc_clk->clk_num; i++) {
@@ -68,29 +46,23 @@ int mtk_vcodec_init_enc_pm(struct mtk_vcodec_dev *mtkdev)
"clock-names", i, &clk_info->clk_name);
if (ret) {
mtk_v4l2_err("venc failed to get clk name %d", i);
- goto put_larbvenc;
+ return ret;
}
clk_info->vcodec_clk = devm_clk_get(&pdev->dev,
clk_info->clk_name);
if (IS_ERR(clk_info->vcodec_clk)) {
mtk_v4l2_err("venc devm_clk_get (%d)%s fail", i,
clk_info->clk_name);
- ret = PTR_ERR(clk_info->vcodec_clk);
- goto put_larbvenc;
+ return PTR_ERR(clk_info->vcodec_clk);
}
}

return 0;
-
-put_larbvenc:
- put_device(pm->larbvenc);
- return ret;
}

void mtk_vcodec_release_enc_pm(struct mtk_vcodec_dev *mtkdev)
{
pm_runtime_disable(mtkdev->pm.dev);
- put_device(mtkdev->pm.larbvenc);
}


@@ -108,11 +80,6 @@ void mtk_vcodec_enc_clock_on(struct mtk_vcodec_pm *pm)
}
}

- ret = mtk_smi_larb_get(pm->larbvenc);
- if (ret) {
- mtk_v4l2_err("mtk_smi_larb_get larb3 fail %d", ret);
- goto clkerr;
- }
return;

clkerr:
@@ -125,7 +92,6 @@ void mtk_vcodec_enc_clock_off(struct mtk_vcodec_pm *pm)
struct mtk_vcodec_clk *enc_clk = &pm->venc_clk;
int i = 0;

- mtk_smi_larb_put(pm->larbvenc);
for (i = enc_clk->clk_num - 1; i >= 0; i--)
clk_disable_unprepare(enc_clk->clk_info[i].vcodec_clk);
}
--
2.18.0

2021-07-14 02:59:55

by Yong Wu (吴勇)

[permalink] [raw]
Subject: [PATCH v6 01/11] dt-binding: mediatek: Get rid of mediatek,larb for multimedia HW

After adding device_link between the consumer with the smi-larbs,
if the consumer call its owner pm_runtime_get(_sync), the
pm_runtime_get(_sync) of smi-larb and smi-common will be called
automatically. Thus, the consumer don't need the property.

And IOMMU also know which larb this consumer connects with from
iommu id in the "iommus=" property.

Signed-off-by: Yong Wu <[email protected]>
Reviewed-by: Rob Herring <[email protected]>
Reviewed-by: Evan Green <[email protected]>
---
.../bindings/display/mediatek/mediatek,disp.txt | 9 ---------
.../devicetree/bindings/media/mediatek-jpeg-decoder.yaml | 9 ---------
.../devicetree/bindings/media/mediatek-jpeg-encoder.yaml | 9 ---------
Documentation/devicetree/bindings/media/mediatek-mdp.txt | 8 --------
.../devicetree/bindings/media/mediatek-vcodec.txt | 4 ----
5 files changed, 39 deletions(-)

diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,disp.txt b/Documentation/devicetree/bindings/display/mediatek/mediatek,disp.txt
index fbb59c9ddda6..867bd82e2f03 100644
--- a/Documentation/devicetree/bindings/display/mediatek/mediatek,disp.txt
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,disp.txt
@@ -61,8 +61,6 @@ Required properties (DMA function blocks):
"mediatek,<chip>-disp-rdma"
"mediatek,<chip>-disp-wdma"
the supported chips are mt2701, mt8167 and mt8173.
-- larb: Should contain a phandle pointing to the local arbiter device as defined
- in Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml
- iommus: Should point to the respective IOMMU block with master port as
argument, see Documentation/devicetree/bindings/iommu/mediatek,iommu.yaml
for details.
@@ -91,7 +89,6 @@ ovl0: ovl@1400c000 {
power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
clocks = <&mmsys CLK_MM_DISP_OVL0>;
iommus = <&iommu M4U_PORT_DISP_OVL0>;
- mediatek,larb = <&larb0>;
};

ovl1: ovl@1400d000 {
@@ -101,7 +98,6 @@ ovl1: ovl@1400d000 {
power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
clocks = <&mmsys CLK_MM_DISP_OVL1>;
iommus = <&iommu M4U_PORT_DISP_OVL1>;
- mediatek,larb = <&larb4>;
};

rdma0: rdma@1400e000 {
@@ -111,7 +107,6 @@ rdma0: rdma@1400e000 {
power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
clocks = <&mmsys CLK_MM_DISP_RDMA0>;
iommus = <&iommu M4U_PORT_DISP_RDMA0>;
- mediatek,larb = <&larb0>;
mediatek,rdma-fifosize = <8192>;
};

@@ -122,7 +117,6 @@ rdma1: rdma@1400f000 {
power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
clocks = <&mmsys CLK_MM_DISP_RDMA1>;
iommus = <&iommu M4U_PORT_DISP_RDMA1>;
- mediatek,larb = <&larb4>;
};

rdma2: rdma@14010000 {
@@ -132,7 +126,6 @@ rdma2: rdma@14010000 {
power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
clocks = <&mmsys CLK_MM_DISP_RDMA2>;
iommus = <&iommu M4U_PORT_DISP_RDMA2>;
- mediatek,larb = <&larb4>;
};

wdma0: wdma@14011000 {
@@ -142,7 +135,6 @@ wdma0: wdma@14011000 {
power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
clocks = <&mmsys CLK_MM_DISP_WDMA0>;
iommus = <&iommu M4U_PORT_DISP_WDMA0>;
- mediatek,larb = <&larb0>;
};

wdma1: wdma@14012000 {
@@ -152,7 +144,6 @@ wdma1: wdma@14012000 {
power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
clocks = <&mmsys CLK_MM_DISP_WDMA1>;
iommus = <&iommu M4U_PORT_DISP_WDMA1>;
- mediatek,larb = <&larb4>;
};

color0: color@14013000 {
diff --git a/Documentation/devicetree/bindings/media/mediatek-jpeg-decoder.yaml b/Documentation/devicetree/bindings/media/mediatek-jpeg-decoder.yaml
index 9b87f036f178..052e752157b4 100644
--- a/Documentation/devicetree/bindings/media/mediatek-jpeg-decoder.yaml
+++ b/Documentation/devicetree/bindings/media/mediatek-jpeg-decoder.yaml
@@ -42,13 +42,6 @@ properties:
power-domains:
maxItems: 1

- mediatek,larb:
- $ref: '/schemas/types.yaml#/definitions/phandle'
- description: |
- Must contain the local arbiters in the current Socs, see
- Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml
- for details.
-
iommus:
maxItems: 2
description: |
@@ -63,7 +56,6 @@ required:
- clocks
- clock-names
- power-domains
- - mediatek,larb
- iommus

additionalProperties: false
@@ -83,7 +75,6 @@ examples:
clock-names = "jpgdec-smi",
"jpgdec";
power-domains = <&scpsys MT2701_POWER_DOMAIN_ISP>;
- mediatek,larb = <&larb2>;
iommus = <&iommu MT2701_M4U_PORT_JPGDEC_WDMA>,
<&iommu MT2701_M4U_PORT_JPGDEC_BSDMA>;
};
diff --git a/Documentation/devicetree/bindings/media/mediatek-jpeg-encoder.yaml b/Documentation/devicetree/bindings/media/mediatek-jpeg-encoder.yaml
index fcd9b829e036..8bfdfdfaba59 100644
--- a/Documentation/devicetree/bindings/media/mediatek-jpeg-encoder.yaml
+++ b/Documentation/devicetree/bindings/media/mediatek-jpeg-encoder.yaml
@@ -35,13 +35,6 @@ properties:
power-domains:
maxItems: 1

- mediatek,larb:
- $ref: '/schemas/types.yaml#/definitions/phandle'
- description: |
- Must contain the local arbiters in the current Socs, see
- Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml
- for details.
-
iommus:
maxItems: 2
description: |
@@ -56,7 +49,6 @@ required:
- clocks
- clock-names
- power-domains
- - mediatek,larb
- iommus

additionalProperties: false
@@ -75,7 +67,6 @@ examples:
clocks = <&imgsys CLK_IMG_VENC>;
clock-names = "jpgenc";
power-domains = <&scpsys MT2701_POWER_DOMAIN_ISP>;
- mediatek,larb = <&larb2>;
iommus = <&iommu MT2701_M4U_PORT_JPGENC_RDMA>,
<&iommu MT2701_M4U_PORT_JPGENC_BSDMA>;
};
diff --git a/Documentation/devicetree/bindings/media/mediatek-mdp.txt b/Documentation/devicetree/bindings/media/mediatek-mdp.txt
index caa24943da33..53ef26e2c857 100644
--- a/Documentation/devicetree/bindings/media/mediatek-mdp.txt
+++ b/Documentation/devicetree/bindings/media/mediatek-mdp.txt
@@ -27,9 +27,6 @@ Required properties (DMA function blocks, child node):
- iommus: should point to the respective IOMMU block with master port as
argument, see Documentation/devicetree/bindings/iommu/mediatek,iommu.yaml
for details.
-- mediatek,larb: must contain the local arbiters in the current Socs, see
- Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml
- for details.

Example:
mdp_rdma0: rdma@14001000 {
@@ -40,7 +37,6 @@ Example:
<&mmsys CLK_MM_MUTEX_32K>;
power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
iommus = <&iommu M4U_PORT_MDP_RDMA0>;
- mediatek,larb = <&larb0>;
mediatek,vpu = <&vpu>;
};

@@ -51,7 +47,6 @@ Example:
<&mmsys CLK_MM_MUTEX_32K>;
power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
iommus = <&iommu M4U_PORT_MDP_RDMA1>;
- mediatek,larb = <&larb4>;
};

mdp_rsz0: rsz@14003000 {
@@ -81,7 +76,6 @@ Example:
clocks = <&mmsys CLK_MM_MDP_WDMA>;
power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
iommus = <&iommu M4U_PORT_MDP_WDMA>;
- mediatek,larb = <&larb0>;
};

mdp_wrot0: wrot@14007000 {
@@ -90,7 +84,6 @@ Example:
clocks = <&mmsys CLK_MM_MDP_WROT0>;
power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
iommus = <&iommu M4U_PORT_MDP_WROT0>;
- mediatek,larb = <&larb0>;
};

mdp_wrot1: wrot@14008000 {
@@ -99,5 +92,4 @@ Example:
clocks = <&mmsys CLK_MM_MDP_WROT1>;
power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
iommus = <&iommu M4U_PORT_MDP_WROT1>;
- mediatek,larb = <&larb4>;
};
diff --git a/Documentation/devicetree/bindings/media/mediatek-vcodec.txt b/Documentation/devicetree/bindings/media/mediatek-vcodec.txt
index ad1321e5a22d..71237355cc7e 100644
--- a/Documentation/devicetree/bindings/media/mediatek-vcodec.txt
+++ b/Documentation/devicetree/bindings/media/mediatek-vcodec.txt
@@ -13,7 +13,6 @@ Required properties:
- reg : Physical base address of the video codec registers and length of
memory mapped region.
- interrupts : interrupt number to the cpu.
-- mediatek,larb : must contain the local arbiters in the current Socs.
- clocks : list of clock specifiers, corresponding to entries in
the clock-names property.
- clock-names: avc encoder must contain "venc_sel", vp8 encoder must
@@ -46,7 +45,6 @@ vcodec_dec: vcodec@16000000 {
<0 0x16027800 0 0x800>, /*VP8_VL*/
<0 0x16028400 0 0x400>; /*VP9_VD*/
interrupts = <GIC_SPI 204 IRQ_TYPE_LEVEL_LOW>;
- mediatek,larb = <&larb1>;
iommus = <&iommu M4U_PORT_HW_VDEC_MC_EXT>,
<&iommu M4U_PORT_HW_VDEC_PP_EXT>,
<&iommu M4U_PORT_HW_VDEC_AVC_MV_EXT>,
@@ -99,7 +97,6 @@ vcodec_enc_avc: vcodec@18002000 {
<&iommu M4U_PORT_VENC_REF_CHROMA>,
<&iommu M4U_PORT_VENC_NBM_RDMA>,
<&iommu M4U_PORT_VENC_NBM_WDMA>;
- mediatek,larb = <&larb3>;
mediatek,vpu = <&vpu>;
clocks = <&topckgen CLK_TOP_VENC_SEL>;
clock-names = "venc_sel";
@@ -120,7 +117,6 @@ vcodec_enc_vp8: vcodec@19002000 {
<&iommu M4U_PORT_VENC_CUR_CHROMA_SET2>,
<&iommu M4U_PORT_VENC_REF_LUMA_SET2>,
<&iommu M4U_PORT_VENC_REC_CHROMA_SET2>;
- mediatek,larb = <&larb5>;
mediatek,vpu = <&vpu>;
clocks = <&topckgen CLK_TOP_VENC_LT_SEL>;
clock-names = "venc_lt_sel";
--
2.18.0

2021-07-14 03:00:05

by Yong Wu (吴勇)

[permalink] [raw]
Subject: [PATCH v6 07/11] drm/mediatek: Get rid of mtk_smi_larb_get/put

MediaTek IOMMU has already added the device_link between the consumer
and smi-larb device. If the drm device call the pm_runtime_get_sync,
the smi-larb's pm_runtime_get_sync also be called automatically.

CC: CK Hu <[email protected]>
CC: Philipp Zabel <[email protected]>
Signed-off-by: Yong Wu <[email protected]>
Reviewed-by: Evan Green <[email protected]>
Acked-by: Chun-Kuang Hu <[email protected]>
---
drivers/gpu/drm/mediatek/mtk_drm_crtc.c | 9 ------
drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c | 36 ++-------------------
drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h | 1 -
drivers/gpu/drm/mediatek/mtk_drm_drv.c | 5 +--
4 files changed, 3 insertions(+), 48 deletions(-)

diff --git a/drivers/gpu/drm/mediatek/mtk_drm_crtc.c b/drivers/gpu/drm/mediatek/mtk_drm_crtc.c
index 08e3f352377d..d046abcf66ce 100644
--- a/drivers/gpu/drm/mediatek/mtk_drm_crtc.c
+++ b/drivers/gpu/drm/mediatek/mtk_drm_crtc.c
@@ -10,7 +10,6 @@
#include <linux/soc/mediatek/mtk-mutex.h>

#include <asm/barrier.h>
-#include <soc/mediatek/smi.h>

#include <drm/drm_atomic.h>
#include <drm/drm_atomic_helper.h>
@@ -551,12 +550,6 @@ static void mtk_drm_crtc_atomic_enable(struct drm_crtc *crtc,

DRM_DEBUG_DRIVER("%s %d\n", __func__, crtc->base.id);

- ret = mtk_smi_larb_get(comp->larb_dev);
- if (ret) {
- DRM_ERROR("Failed to get larb: %d\n", ret);
- return;
- }
-
ret = pm_runtime_resume_and_get(comp->dev);
if (ret < 0)
DRM_DEV_ERROR(comp->dev, "Failed to enable power domain: %d\n",
@@ -564,7 +557,6 @@ static void mtk_drm_crtc_atomic_enable(struct drm_crtc *crtc,

ret = mtk_crtc_ddp_hw_init(mtk_crtc);
if (ret) {
- mtk_smi_larb_put(comp->larb_dev);
pm_runtime_put(comp->dev);
return;
}
@@ -601,7 +593,6 @@ static void mtk_drm_crtc_atomic_disable(struct drm_crtc *crtc,

drm_crtc_vblank_off(crtc);
mtk_crtc_ddp_hw_fini(mtk_crtc);
- mtk_smi_larb_put(comp->larb_dev);
ret = pm_runtime_put(comp->dev);
if (ret < 0)
DRM_DEV_ERROR(comp->dev, "Failed to disable power domain: %d\n",
diff --git a/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c b/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c
index 75bc00e17fc4..7d240218d4c7 100644
--- a/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c
+++ b/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c
@@ -449,37 +449,15 @@ unsigned int mtk_drm_find_possible_crtc_by_comp(struct drm_device *drm,
return ret;
}

-static int mtk_ddp_get_larb_dev(struct device_node *node, struct mtk_ddp_comp *comp,
- struct device *dev)
-{
- struct device_node *larb_node;
- struct platform_device *larb_pdev;
-
- larb_node = of_parse_phandle(node, "mediatek,larb", 0);
- if (!larb_node) {
- dev_err(dev, "Missing mediadek,larb phandle in %pOF node\n", node);
- return -EINVAL;
- }
-
- larb_pdev = of_find_device_by_node(larb_node);
- if (!larb_pdev) {
- dev_warn(dev, "Waiting for larb device %pOF\n", larb_node);
- of_node_put(larb_node);
- return -EPROBE_DEFER;
- }
- of_node_put(larb_node);
- comp->larb_dev = &larb_pdev->dev;
-
- return 0;
-}
-
int mtk_ddp_comp_init(struct device_node *node, struct mtk_ddp_comp *comp,
enum mtk_ddp_comp_id comp_id)
{
struct platform_device *comp_pdev;
enum mtk_ddp_comp_type type;
struct mtk_ddp_comp_dev *priv;
+#if IS_REACHABLE(CONFIG_MTK_CMDQ)
int ret;
+#endif

if (comp_id < 0 || comp_id >= DDP_COMPONENT_ID_MAX)
return -EINVAL;
@@ -495,16 +473,6 @@ int mtk_ddp_comp_init(struct device_node *node, struct mtk_ddp_comp *comp,
}
comp->dev = &comp_pdev->dev;

- /* Only DMA capable components need the LARB property */
- if (type == MTK_DISP_OVL ||
- type == MTK_DISP_OVL_2L ||
- type == MTK_DISP_RDMA ||
- type == MTK_DISP_WDMA) {
- ret = mtk_ddp_get_larb_dev(node, comp, comp->dev);
- if (ret)
- return ret;
- }
-
if (type == MTK_DISP_BLS ||
type == MTK_DISP_CCORR ||
type == MTK_DISP_COLOR ||
diff --git a/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h b/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h
index bb914d976cf5..1b582262b682 100644
--- a/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h
+++ b/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h
@@ -70,7 +70,6 @@ struct mtk_ddp_comp_funcs {
struct mtk_ddp_comp {
struct device *dev;
int irq;
- struct device *larb_dev;
enum mtk_ddp_comp_id id;
const struct mtk_ddp_comp_funcs *funcs;
};
diff --git a/drivers/gpu/drm/mediatek/mtk_drm_drv.c b/drivers/gpu/drm/mediatek/mtk_drm_drv.c
index b46bdb8985da..0d5ef3d8d081 100644
--- a/drivers/gpu/drm/mediatek/mtk_drm_drv.c
+++ b/drivers/gpu/drm/mediatek/mtk_drm_drv.c
@@ -577,11 +577,8 @@ static int mtk_drm_probe(struct platform_device *pdev)
pm_runtime_disable(dev);
err_node:
of_node_put(private->mutex_node);
- for (i = 0; i < DDP_COMPONENT_ID_MAX; i++) {
+ for (i = 0; i < DDP_COMPONENT_ID_MAX; i++)
of_node_put(private->comp_node[i]);
- if (private->ddp_comp[i].larb_dev)
- put_device(private->ddp_comp[i].larb_dev);
- }
return ret;
}

--
2.18.0

2021-07-14 03:00:33

by Yong Wu (吴勇)

[permalink] [raw]
Subject: [PATCH v6 11/11] arm64: dts: mediatek: Get rid of mediatek,larb for MM nodes

After adding device_link between the IOMMU consumer and smi,
the mediatek,larb is unnecessary now.

CC: Matthias Brugger <[email protected]>
Signed-off-by: Yong Wu <[email protected]>
Reviewed-by: Evan Green <[email protected]>
---
arch/arm64/boot/dts/mediatek/mt8173.dtsi | 16 ----------------
arch/arm64/boot/dts/mediatek/mt8183.dtsi | 6 ------
2 files changed, 22 deletions(-)

diff --git a/arch/arm64/boot/dts/mediatek/mt8173.dtsi b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
index 2f0fc1e317d7..cf5d26db82b8 100644
--- a/arch/arm64/boot/dts/mediatek/mt8173.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
@@ -1009,7 +1009,6 @@
<&mmsys CLK_MM_MUTEX_32K>;
power-domains = <&spm MT8173_POWER_DOMAIN_MM>;
iommus = <&iommu M4U_PORT_MDP_RDMA0>;
- mediatek,larb = <&larb0>;
};

mdp_rdma1: rdma@14002000 {
@@ -1019,7 +1018,6 @@
<&mmsys CLK_MM_MUTEX_32K>;
power-domains = <&spm MT8173_POWER_DOMAIN_MM>;
iommus = <&iommu M4U_PORT_MDP_RDMA1>;
- mediatek,larb = <&larb4>;
};

mdp_rsz0: rsz@14003000 {
@@ -1049,7 +1047,6 @@
clocks = <&mmsys CLK_MM_MDP_WDMA>;
power-domains = <&spm MT8173_POWER_DOMAIN_MM>;
iommus = <&iommu M4U_PORT_MDP_WDMA>;
- mediatek,larb = <&larb0>;
};

mdp_wrot0: wrot@14007000 {
@@ -1058,7 +1055,6 @@
clocks = <&mmsys CLK_MM_MDP_WROT0>;
power-domains = <&spm MT8173_POWER_DOMAIN_MM>;
iommus = <&iommu M4U_PORT_MDP_WROT0>;
- mediatek,larb = <&larb0>;
};

mdp_wrot1: wrot@14008000 {
@@ -1067,7 +1063,6 @@
clocks = <&mmsys CLK_MM_MDP_WROT1>;
power-domains = <&spm MT8173_POWER_DOMAIN_MM>;
iommus = <&iommu M4U_PORT_MDP_WROT1>;
- mediatek,larb = <&larb4>;
};

ovl0: ovl@1400c000 {
@@ -1077,7 +1072,6 @@
power-domains = <&spm MT8173_POWER_DOMAIN_MM>;
clocks = <&mmsys CLK_MM_DISP_OVL0>;
iommus = <&iommu M4U_PORT_DISP_OVL0>;
- mediatek,larb = <&larb0>;
mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xc000 0x1000>;
};

@@ -1088,7 +1082,6 @@
power-domains = <&spm MT8173_POWER_DOMAIN_MM>;
clocks = <&mmsys CLK_MM_DISP_OVL1>;
iommus = <&iommu M4U_PORT_DISP_OVL1>;
- mediatek,larb = <&larb4>;
mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xd000 0x1000>;
};

@@ -1099,7 +1092,6 @@
power-domains = <&spm MT8173_POWER_DOMAIN_MM>;
clocks = <&mmsys CLK_MM_DISP_RDMA0>;
iommus = <&iommu M4U_PORT_DISP_RDMA0>;
- mediatek,larb = <&larb0>;
mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xe000 0x1000>;
};

@@ -1110,7 +1102,6 @@
power-domains = <&spm MT8173_POWER_DOMAIN_MM>;
clocks = <&mmsys CLK_MM_DISP_RDMA1>;
iommus = <&iommu M4U_PORT_DISP_RDMA1>;
- mediatek,larb = <&larb4>;
mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xf000 0x1000>;
};

@@ -1121,7 +1112,6 @@
power-domains = <&spm MT8173_POWER_DOMAIN_MM>;
clocks = <&mmsys CLK_MM_DISP_RDMA2>;
iommus = <&iommu M4U_PORT_DISP_RDMA2>;
- mediatek,larb = <&larb4>;
mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0 0x1000>;
};

@@ -1132,7 +1122,6 @@
power-domains = <&spm MT8173_POWER_DOMAIN_MM>;
clocks = <&mmsys CLK_MM_DISP_WDMA0>;
iommus = <&iommu M4U_PORT_DISP_WDMA0>;
- mediatek,larb = <&larb0>;
mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0x1000 0x1000>;
};

@@ -1143,7 +1132,6 @@
power-domains = <&spm MT8173_POWER_DOMAIN_MM>;
clocks = <&mmsys CLK_MM_DISP_WDMA1>;
iommus = <&iommu M4U_PORT_DISP_WDMA1>;
- mediatek,larb = <&larb4>;
mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0x2000 0x1000>;
};

@@ -1394,7 +1382,6 @@
<0 0x16027800 0 0x800>, /* VDEC_HWB */
<0 0x16028400 0 0x400>; /* VDEC_HWG */
interrupts = <GIC_SPI 204 IRQ_TYPE_LEVEL_LOW>;
- mediatek,larb = <&larb1>;
iommus = <&iommu M4U_PORT_HW_VDEC_MC_EXT>,
<&iommu M4U_PORT_HW_VDEC_PP_EXT>,
<&iommu M4U_PORT_HW_VDEC_AVC_MV_EXT>,
@@ -1462,7 +1449,6 @@
compatible = "mediatek,mt8173-vcodec-enc";
reg = <0 0x18002000 0 0x1000>; /* VENC_SYS */
interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_LOW>;
- mediatek,larb = <&larb3>;
iommus = <&iommu M4U_PORT_VENC_RCPU>,
<&iommu M4U_PORT_VENC_REC>,
<&iommu M4U_PORT_VENC_BSDMA>,
@@ -1490,7 +1476,6 @@
clock-names = "jpgdec-smi",
"jpgdec";
power-domains = <&spm MT8173_POWER_DOMAIN_VENC>;
- mediatek,larb = <&larb3>;
iommus = <&iommu M4U_PORT_JPGDEC_WDMA>,
<&iommu M4U_PORT_JPGDEC_BSDMA>;
};
@@ -1524,7 +1509,6 @@
<&iommu M4U_PORT_VENC_CUR_CHROMA_SET2>,
<&iommu M4U_PORT_VENC_REF_LUMA_SET2>,
<&iommu M4U_PORT_VENC_REC_CHROMA_SET2>;
- mediatek,larb = <&larb5>;
mediatek,vpu = <&vpu>;
clocks = <&topckgen CLK_TOP_VENC_LT_SEL>;
clock-names = "venc_lt_sel";
diff --git a/arch/arm64/boot/dts/mediatek/mt8183.dtsi b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
index ca8ad953de91..d21e1ffc9b35 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
@@ -1239,7 +1239,6 @@
power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
clocks = <&mmsys CLK_MM_DISP_OVL0>;
iommus = <&iommu M4U_PORT_DISP_OVL0>;
- mediatek,larb = <&larb0>;
mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x8000 0x1000>;
};

@@ -1250,7 +1249,6 @@
power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
clocks = <&mmsys CLK_MM_DISP_OVL0_2L>;
iommus = <&iommu M4U_PORT_DISP_2L_OVL0_LARB0>;
- mediatek,larb = <&larb0>;
mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x9000 0x1000>;
};

@@ -1261,7 +1259,6 @@
power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
clocks = <&mmsys CLK_MM_DISP_OVL1_2L>;
iommus = <&iommu M4U_PORT_DISP_2L_OVL1_LARB0>;
- mediatek,larb = <&larb0>;
mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xa000 0x1000>;
};

@@ -1272,7 +1269,6 @@
power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
clocks = <&mmsys CLK_MM_DISP_RDMA0>;
iommus = <&iommu M4U_PORT_DISP_RDMA0>;
- mediatek,larb = <&larb0>;
mediatek,rdma-fifo-size = <5120>;
mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xb000 0x1000>;
};
@@ -1284,7 +1280,6 @@
power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
clocks = <&mmsys CLK_MM_DISP_RDMA1>;
iommus = <&iommu M4U_PORT_DISP_RDMA1>;
- mediatek,larb = <&larb0>;
mediatek,rdma-fifo-size = <2048>;
mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xc000 0x1000>;
};
@@ -1439,7 +1434,6 @@
compatible = "mediatek,mt8183-jpgenc", "mediatek,mtk-jpgenc";
reg = <0 0x17030000 0 0x1000>;
interrupts = <GIC_SPI 249 IRQ_TYPE_LEVEL_LOW>;
- mediatek,larb = <&larb4>;
iommus = <&iommu M4U_PORT_JPGENC_RDMA>,
<&iommu M4U_PORT_JPGENC_BSDMA>;
power-domains = <&spm MT8183_POWER_DOMAIN_VENC>;
--
2.18.0

2021-07-14 08:14:02

by Dafna Hirschfeld

[permalink] [raw]
Subject: Re: [PATCH v6 01/11] dt-binding: mediatek: Get rid of mediatek, larb for multimedia HW

Hi,
thanks for the patch

On 14.07.21 04:56, Yong Wu wrote:
> After adding device_link between the consumer with the smi-larbs,
> if the consumer call its owner pm_runtime_get(_sync), the
> pm_runtime_get(_sync) of smi-larb and smi-common will be called
> automatically. Thus, the consumer don't need the property.
>
> And IOMMU also know which larb this consumer connects with from
> iommu id in the "iommus=" property.
>
> Signed-off-by: Yong Wu <[email protected]>
> Reviewed-by: Rob Herring <[email protected]>
> Reviewed-by: Evan Green <[email protected]>
> ---
> .../bindings/display/mediatek/mediatek,disp.txt | 9 ---------
> .../devicetree/bindings/media/mediatek-jpeg-decoder.yaml | 9 ---------
> .../devicetree/bindings/media/mediatek-jpeg-encoder.yaml | 9 ---------

On which repo are these patches based on ?
In linux-next the file mediatek-jpeg-encoder.yaml don't exist

Thanks,
Dafna

> Documentation/devicetree/bindings/media/mediatek-mdp.txt | 8 --------
> .../devicetree/bindings/media/mediatek-vcodec.txt | 4 ----
> 5 files changed, 39 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,disp.txt b/Documentation/devicetree/bindings/display/mediatek/mediatek,disp.txt
> index fbb59c9ddda6..867bd82e2f03 100644
> --- a/Documentation/devicetree/bindings/display/mediatek/mediatek,disp.txt
> +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,disp.txt
> @@ -61,8 +61,6 @@ Required properties (DMA function blocks):
> "mediatek,<chip>-disp-rdma"
> "mediatek,<chip>-disp-wdma"
> the supported chips are mt2701, mt8167 and mt8173.
> -- larb: Should contain a phandle pointing to the local arbiter device as defined
> - in Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml
> - iommus: Should point to the respective IOMMU block with master port as
> argument, see Documentation/devicetree/bindings/iommu/mediatek,iommu.yaml
> for details.
> @@ -91,7 +89,6 @@ ovl0: ovl@1400c000 {
> power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
> clocks = <&mmsys CLK_MM_DISP_OVL0>;
> iommus = <&iommu M4U_PORT_DISP_OVL0>;
> - mediatek,larb = <&larb0>;
> };
>
> ovl1: ovl@1400d000 {
> @@ -101,7 +98,6 @@ ovl1: ovl@1400d000 {
> power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
> clocks = <&mmsys CLK_MM_DISP_OVL1>;
> iommus = <&iommu M4U_PORT_DISP_OVL1>;
> - mediatek,larb = <&larb4>;
> };
>
> rdma0: rdma@1400e000 {
> @@ -111,7 +107,6 @@ rdma0: rdma@1400e000 {
> power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
> clocks = <&mmsys CLK_MM_DISP_RDMA0>;
> iommus = <&iommu M4U_PORT_DISP_RDMA0>;
> - mediatek,larb = <&larb0>;
> mediatek,rdma-fifosize = <8192>;
> };
>
> @@ -122,7 +117,6 @@ rdma1: rdma@1400f000 {
> power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
> clocks = <&mmsys CLK_MM_DISP_RDMA1>;
> iommus = <&iommu M4U_PORT_DISP_RDMA1>;
> - mediatek,larb = <&larb4>;
> };
>
> rdma2: rdma@14010000 {
> @@ -132,7 +126,6 @@ rdma2: rdma@14010000 {
> power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
> clocks = <&mmsys CLK_MM_DISP_RDMA2>;
> iommus = <&iommu M4U_PORT_DISP_RDMA2>;
> - mediatek,larb = <&larb4>;
> };
>
> wdma0: wdma@14011000 {
> @@ -142,7 +135,6 @@ wdma0: wdma@14011000 {
> power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
> clocks = <&mmsys CLK_MM_DISP_WDMA0>;
> iommus = <&iommu M4U_PORT_DISP_WDMA0>;
> - mediatek,larb = <&larb0>;
> };
>
> wdma1: wdma@14012000 {
> @@ -152,7 +144,6 @@ wdma1: wdma@14012000 {
> power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
> clocks = <&mmsys CLK_MM_DISP_WDMA1>;
> iommus = <&iommu M4U_PORT_DISP_WDMA1>;
> - mediatek,larb = <&larb4>;
> };
>
> color0: color@14013000 {
> diff --git a/Documentation/devicetree/bindings/media/mediatek-jpeg-decoder.yaml b/Documentation/devicetree/bindings/media/mediatek-jpeg-decoder.yaml
> index 9b87f036f178..052e752157b4 100644
> --- a/Documentation/devicetree/bindings/media/mediatek-jpeg-decoder.yaml
> +++ b/Documentation/devicetree/bindings/media/mediatek-jpeg-decoder.yaml
> @@ -42,13 +42,6 @@ properties:
> power-domains:
> maxItems: 1
>
> - mediatek,larb:
> - $ref: '/schemas/types.yaml#/definitions/phandle'
> - description: |
> - Must contain the local arbiters in the current Socs, see
> - Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml
> - for details.
> -
> iommus:
> maxItems: 2
> description: |
> @@ -63,7 +56,6 @@ required:
> - clocks
> - clock-names
> - power-domains
> - - mediatek,larb
> - iommus
>
> additionalProperties: false
> @@ -83,7 +75,6 @@ examples:
> clock-names = "jpgdec-smi",
> "jpgdec";
> power-domains = <&scpsys MT2701_POWER_DOMAIN_ISP>;
> - mediatek,larb = <&larb2>;
> iommus = <&iommu MT2701_M4U_PORT_JPGDEC_WDMA>,
> <&iommu MT2701_M4U_PORT_JPGDEC_BSDMA>;
> };
> diff --git a/Documentation/devicetree/bindings/media/mediatek-jpeg-encoder.yaml b/Documentation/devicetree/bindings/media/mediatek-jpeg-encoder.yaml
> index fcd9b829e036..8bfdfdfaba59 100644
> --- a/Documentation/devicetree/bindings/media/mediatek-jpeg-encoder.yaml
> +++ b/Documentation/devicetree/bindings/media/mediatek-jpeg-encoder.yaml
> @@ -35,13 +35,6 @@ properties:
> power-domains:
> maxItems: 1
>
> - mediatek,larb:
> - $ref: '/schemas/types.yaml#/definitions/phandle'
> - description: |
> - Must contain the local arbiters in the current Socs, see
> - Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml
> - for details.
> -
> iommus:
> maxItems: 2
> description: |
> @@ -56,7 +49,6 @@ required:
> - clocks
> - clock-names
> - power-domains
> - - mediatek,larb
> - iommus
>
> additionalProperties: false
> @@ -75,7 +67,6 @@ examples:
> clocks = <&imgsys CLK_IMG_VENC>;
> clock-names = "jpgenc";
> power-domains = <&scpsys MT2701_POWER_DOMAIN_ISP>;
> - mediatek,larb = <&larb2>;
> iommus = <&iommu MT2701_M4U_PORT_JPGENC_RDMA>,
> <&iommu MT2701_M4U_PORT_JPGENC_BSDMA>;
> };
> diff --git a/Documentation/devicetree/bindings/media/mediatek-mdp.txt b/Documentation/devicetree/bindings/media/mediatek-mdp.txt
> index caa24943da33..53ef26e2c857 100644
> --- a/Documentation/devicetree/bindings/media/mediatek-mdp.txt
> +++ b/Documentation/devicetree/bindings/media/mediatek-mdp.txt
> @@ -27,9 +27,6 @@ Required properties (DMA function blocks, child node):
> - iommus: should point to the respective IOMMU block with master port as
> argument, see Documentation/devicetree/bindings/iommu/mediatek,iommu.yaml
> for details.
> -- mediatek,larb: must contain the local arbiters in the current Socs, see
> - Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml
> - for details.
>
> Example:
> mdp_rdma0: rdma@14001000 {
> @@ -40,7 +37,6 @@ Example:
> <&mmsys CLK_MM_MUTEX_32K>;
> power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
> iommus = <&iommu M4U_PORT_MDP_RDMA0>;
> - mediatek,larb = <&larb0>;
> mediatek,vpu = <&vpu>;
> };
>
> @@ -51,7 +47,6 @@ Example:
> <&mmsys CLK_MM_MUTEX_32K>;
> power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
> iommus = <&iommu M4U_PORT_MDP_RDMA1>;
> - mediatek,larb = <&larb4>;
> };
>
> mdp_rsz0: rsz@14003000 {
> @@ -81,7 +76,6 @@ Example:
> clocks = <&mmsys CLK_MM_MDP_WDMA>;
> power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
> iommus = <&iommu M4U_PORT_MDP_WDMA>;
> - mediatek,larb = <&larb0>;
> };
>
> mdp_wrot0: wrot@14007000 {
> @@ -90,7 +84,6 @@ Example:
> clocks = <&mmsys CLK_MM_MDP_WROT0>;
> power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
> iommus = <&iommu M4U_PORT_MDP_WROT0>;
> - mediatek,larb = <&larb0>;
> };
>
> mdp_wrot1: wrot@14008000 {
> @@ -99,5 +92,4 @@ Example:
> clocks = <&mmsys CLK_MM_MDP_WROT1>;
> power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
> iommus = <&iommu M4U_PORT_MDP_WROT1>;
> - mediatek,larb = <&larb4>;
> };
> diff --git a/Documentation/devicetree/bindings/media/mediatek-vcodec.txt b/Documentation/devicetree/bindings/media/mediatek-vcodec.txt
> index ad1321e5a22d..71237355cc7e 100644
> --- a/Documentation/devicetree/bindings/media/mediatek-vcodec.txt
> +++ b/Documentation/devicetree/bindings/media/mediatek-vcodec.txt
> @@ -13,7 +13,6 @@ Required properties:
> - reg : Physical base address of the video codec registers and length of
> memory mapped region.
> - interrupts : interrupt number to the cpu.
> -- mediatek,larb : must contain the local arbiters in the current Socs.
> - clocks : list of clock specifiers, corresponding to entries in
> the clock-names property.
> - clock-names: avc encoder must contain "venc_sel", vp8 encoder must
> @@ -46,7 +45,6 @@ vcodec_dec: vcodec@16000000 {
> <0 0x16027800 0 0x800>, /*VP8_VL*/
> <0 0x16028400 0 0x400>; /*VP9_VD*/
> interrupts = <GIC_SPI 204 IRQ_TYPE_LEVEL_LOW>;
> - mediatek,larb = <&larb1>;
> iommus = <&iommu M4U_PORT_HW_VDEC_MC_EXT>,
> <&iommu M4U_PORT_HW_VDEC_PP_EXT>,
> <&iommu M4U_PORT_HW_VDEC_AVC_MV_EXT>,
> @@ -99,7 +97,6 @@ vcodec_enc_avc: vcodec@18002000 {
> <&iommu M4U_PORT_VENC_REF_CHROMA>,
> <&iommu M4U_PORT_VENC_NBM_RDMA>,
> <&iommu M4U_PORT_VENC_NBM_WDMA>;
> - mediatek,larb = <&larb3>;
> mediatek,vpu = <&vpu>;
> clocks = <&topckgen CLK_TOP_VENC_SEL>;
> clock-names = "venc_sel";
> @@ -120,7 +117,6 @@ vcodec_enc_vp8: vcodec@19002000 {
> <&iommu M4U_PORT_VENC_CUR_CHROMA_SET2>,
> <&iommu M4U_PORT_VENC_REF_LUMA_SET2>,
> <&iommu M4U_PORT_VENC_REC_CHROMA_SET2>;
> - mediatek,larb = <&larb5>;
> mediatek,vpu = <&vpu>;
> clocks = <&topckgen CLK_TOP_VENC_LT_SEL>;
> clock-names = "venc_lt_sel";
>

2021-07-14 08:28:04

by Dafna Hirschfeld

[permalink] [raw]
Subject: Re: [PATCH v6 03/11] iommu/mediatek: Add device_link between the consumer and the larb devices



On 14.07.21 04:56, Yong Wu wrote:
> MediaTek IOMMU-SMI diagram is like below. all the consumer connect with
> smi-larb, then connect with smi-common.
>
> M4U
> |
> smi-common
> |
> -------------
> | | ...
> | |
> larb1 larb2
> | |
> vdec venc
>
> When the consumer works, it should enable the smi-larb's power which
> also need enable the smi-common's power firstly.
>
> Thus, First of all, use the device link connect the consumer and the
> smi-larbs. then add device link between the smi-larb and smi-common.
>
> This patch adds device_link between the consumer and the larbs.
>
> When device_link_add, I add the flag DL_FLAG_STATELESS to avoid calling
> pm_runtime_xx to keep the original status of clocks. It can avoid two
> issues:
> 1) Display HW show fastlogo abnormally reported in [1]. At the beggining,
> all the clocks are enabled before entering kernel, but the clocks for
> display HW(always in larb0) will be gated after clk_enable and clk_disable
> called from device_link_add(->pm_runtime_resume) and rpm_idle. The clock
> operation happened before display driver probe. At that time, the display
> HW will be abnormal.
>
> 2) A deadlock issue reported in [2]. Use DL_FLAG_STATELESS to skip
> pm_runtime_xx to avoid the deadlock.
>
> Corresponding, DL_FLAG_AUTOREMOVE_CONSUMER can't be added, then
> device_link_removed should be added explicitly.
>
> [1] https://lore.kernel.org/linux-mediatek/1564213888.22908.4.camel@mhfsdcap03/
> [2] https://lore.kernel.org/patchwork/patch/1086569/
>
> Suggested-by: Tomasz Figa <[email protected]>
> Signed-off-by: Yong Wu <[email protected]>
> ---
> drivers/iommu/mtk_iommu.c | 22 ++++++++++++++++++++++
> drivers/iommu/mtk_iommu_v1.c | 20 +++++++++++++++++++-
> 2 files changed, 41 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/iommu/mtk_iommu.c b/drivers/iommu/mtk_iommu.c
> index a02dde094788..ee742900cf4b 100644
> --- a/drivers/iommu/mtk_iommu.c
> +++ b/drivers/iommu/mtk_iommu.c
> @@ -571,22 +571,44 @@ static struct iommu_device *mtk_iommu_probe_device(struct device *dev)
> {
> struct iommu_fwspec *fwspec = dev_iommu_fwspec_get(dev);
> struct mtk_iommu_data *data;
> + struct device_link *link;
> + struct device *larbdev;
> + unsigned int larbid;
>
> if (!fwspec || fwspec->ops != &mtk_iommu_ops)
> return ERR_PTR(-ENODEV); /* Not a iommu client device */
>
> data = dev_iommu_priv_get(dev);
>
> + /*
> + * Link the consumer device with the smi-larb device(supplier)
> + * The device in each a larb is a independent HW. thus only link
> + * one larb here.
> + */
> + larbid = MTK_M4U_TO_LARB(fwspec->ids[0]);
> + larbdev = data->larb_imu[larbid].dev;
> + link = device_link_add(dev, larbdev,
> + DL_FLAG_PM_RUNTIME | DL_FLAG_STATELESS);
> + if (!link)
> + dev_err(dev, "Unable to link %s\n", dev_name(larbdev));
shoudn't ERR_PTR be returned in case of failure?

Thanks,
Dafna

> return &data->iommu;
> }
>
> static void mtk_iommu_release_device(struct device *dev)
> {
> struct iommu_fwspec *fwspec = dev_iommu_fwspec_get(dev);
> + struct mtk_iommu_data *data;
> + struct device *larbdev;
> + unsigned int larbid;
>
> if (!fwspec || fwspec->ops != &mtk_iommu_ops)
> return;
>
> + data = dev_iommu_priv_get(dev);
> + larbid = MTK_M4U_TO_LARB(fwspec->ids[0]);
> + larbdev = data->larb_imu[larbid].dev;
> + device_link_remove(dev, larbdev);
> +
> iommu_fwspec_free(dev);
> }
>
> diff --git a/drivers/iommu/mtk_iommu_v1.c b/drivers/iommu/mtk_iommu_v1.c
> index d9365a3d8dc9..d2a7c66b8239 100644
> --- a/drivers/iommu/mtk_iommu_v1.c
> +++ b/drivers/iommu/mtk_iommu_v1.c
> @@ -424,7 +424,9 @@ static struct iommu_device *mtk_iommu_probe_device(struct device *dev)
> struct iommu_fwspec *fwspec = dev_iommu_fwspec_get(dev);
> struct of_phandle_args iommu_spec;
> struct mtk_iommu_data *data;
> - int err, idx = 0;
> + int err, idx = 0, larbid;
> + struct device_link *link;
> + struct device *larbdev;
>
> while (!of_parse_phandle_with_args(dev->of_node, "iommus",
> "#iommu-cells",
> @@ -445,6 +447,14 @@ static struct iommu_device *mtk_iommu_probe_device(struct device *dev)
>
> data = dev_iommu_priv_get(dev);
>
> + /* Link the consumer device with the smi-larb device(supplier) */
> + larbid = mt2701_m4u_to_larb(fwspec->ids[0]);
> + larbdev = data->larb_imu[larbid].dev;
> + link = device_link_add(dev, larbdev,
> + DL_FLAG_PM_RUNTIME | DL_FLAG_STATELESS);
> + if (!link)
> + dev_err(dev, "Unable to link %s\n", dev_name(larbdev));
> +
> return &data->iommu;
> }
>
> @@ -465,10 +475,18 @@ static void mtk_iommu_probe_finalize(struct device *dev)
> static void mtk_iommu_release_device(struct device *dev)
> {
> struct iommu_fwspec *fwspec = dev_iommu_fwspec_get(dev);
> + struct mtk_iommu_data *data;
> + struct device *larbdev;
> + unsigned int larbid;
>
> if (!fwspec || fwspec->ops != &mtk_iommu_ops)
> return;
>
> + data = dev_iommu_priv_get(dev);
> + larbid = mt2701_m4u_to_larb(fwspec->ids[0]);
> + larbdev = data->larb_imu[larbid].dev;
> + device_link_remove(dev, larbdev);
> +
> iommu_fwspec_free(dev);
> }
>
>

2021-07-14 08:29:59

by Dafna Hirschfeld

[permalink] [raw]
Subject: Re: [PATCH v6 04/11] media: mtk-jpeg: Get rid of mtk_smi_larb_get/put



On 14.07.21 04:56, Yong Wu wrote:
> MediaTek IOMMU has already added device_link between the consumer
> and smi-larb device. If the jpg device call the pm_runtime_get_sync,
> the smi-larb's pm_runtime_get_sync also be called automatically.
>
> After removing the larb_get operations, then mtk_jpeg_clk_init is
> also unnecessary. Remove it too.
>
> CC: Rick Chang <[email protected]>
> CC: Xia Jiang <[email protected]>
> Signed-off-by: Yong Wu <[email protected]>
> Reviewed-by: Evan Green <[email protected]>
> Acked-by: Rick Chang <[email protected]>

Reviewed-by: Dafna Hirschfeld <[email protected]>

> ---
> .../media/platform/mtk-jpeg/mtk_jpeg_core.c | 45 +------------------
> .../media/platform/mtk-jpeg/mtk_jpeg_core.h | 2 -
> 2 files changed, 2 insertions(+), 45 deletions(-)
>
> diff --git a/drivers/media/platform/mtk-jpeg/mtk_jpeg_core.c b/drivers/media/platform/mtk-jpeg/mtk_jpeg_core.c
> index a89c7b206eef..4fea2c512434 100644
> --- a/drivers/media/platform/mtk-jpeg/mtk_jpeg_core.c
> +++ b/drivers/media/platform/mtk-jpeg/mtk_jpeg_core.c
> @@ -22,7 +22,6 @@
> #include <media/v4l2-ioctl.h>
> #include <media/videobuf2-core.h>
> #include <media/videobuf2-dma-contig.h>
> -#include <soc/mediatek/smi.h>
>
> #include "mtk_jpeg_enc_hw.h"
> #include "mtk_jpeg_dec_hw.h"
> @@ -1055,10 +1054,6 @@ static void mtk_jpeg_clk_on(struct mtk_jpeg_dev *jpeg)
> {
> int ret;
>
> - ret = mtk_smi_larb_get(jpeg->larb);
> - if (ret)
> - dev_err(jpeg->dev, "mtk_smi_larb_get larbvdec fail %d\n", ret);
> -
> ret = clk_bulk_prepare_enable(jpeg->variant->num_clks,
> jpeg->variant->clks);
> if (ret)
> @@ -1069,7 +1064,6 @@ static void mtk_jpeg_clk_off(struct mtk_jpeg_dev *jpeg)
> {
> clk_bulk_disable_unprepare(jpeg->variant->num_clks,
> jpeg->variant->clks);
> - mtk_smi_larb_put(jpeg->larb);
> }
>
> static irqreturn_t mtk_jpeg_enc_done(struct mtk_jpeg_dev *jpeg)
> @@ -1284,35 +1278,6 @@ static struct clk_bulk_data mtk_jpeg_clocks[] = {
> { .id = "jpgenc" },
> };
>
> -static int mtk_jpeg_clk_init(struct mtk_jpeg_dev *jpeg)
> -{
> - struct device_node *node;
> - struct platform_device *pdev;
> - int ret;
> -
> - node = of_parse_phandle(jpeg->dev->of_node, "mediatek,larb", 0);
> - if (!node)
> - return -EINVAL;
> - pdev = of_find_device_by_node(node);
> - if (WARN_ON(!pdev)) {
> - of_node_put(node);
> - return -EINVAL;
> - }
> - of_node_put(node);
> -
> - jpeg->larb = &pdev->dev;
> -
> - ret = devm_clk_bulk_get(jpeg->dev, jpeg->variant->num_clks,
> - jpeg->variant->clks);
> - if (ret) {
> - dev_err(&pdev->dev, "failed to get jpeg clock:%d\n", ret);
> - put_device(&pdev->dev);
> - return ret;
> - }
> -
> - return 0;
> -}
> -
> static void mtk_jpeg_job_timeout_work(struct work_struct *work)
> {
> struct mtk_jpeg_dev *jpeg = container_of(work, struct mtk_jpeg_dev,
> @@ -1333,11 +1298,6 @@ static void mtk_jpeg_job_timeout_work(struct work_struct *work)
> v4l2_m2m_job_finish(jpeg->m2m_dev, ctx->fh.m2m_ctx);
> }
>
> -static inline void mtk_jpeg_clk_release(struct mtk_jpeg_dev *jpeg)
> -{
> - put_device(jpeg->larb);
> -}
> -
> static int mtk_jpeg_probe(struct platform_device *pdev)
> {
> struct mtk_jpeg_dev *jpeg;
> @@ -1376,7 +1336,8 @@ static int mtk_jpeg_probe(struct platform_device *pdev)
> goto err_req_irq;
> }
>
> - ret = mtk_jpeg_clk_init(jpeg);
> + ret = devm_clk_bulk_get(jpeg->dev, jpeg->variant->num_clks,
> + jpeg->variant->clks);
> if (ret) {
> dev_err(&pdev->dev, "Failed to init clk, err %d\n", ret);
> goto err_clk_init;
> @@ -1442,7 +1403,6 @@ static int mtk_jpeg_probe(struct platform_device *pdev)
> v4l2_device_unregister(&jpeg->v4l2_dev);
>
> err_dev_register:
> - mtk_jpeg_clk_release(jpeg);
>
> err_clk_init:
>
> @@ -1460,7 +1420,6 @@ static int mtk_jpeg_remove(struct platform_device *pdev)
> video_device_release(jpeg->vdev);
> v4l2_m2m_release(jpeg->m2m_dev);
> v4l2_device_unregister(&jpeg->v4l2_dev);
> - mtk_jpeg_clk_release(jpeg);
>
> return 0;
> }
> diff --git a/drivers/media/platform/mtk-jpeg/mtk_jpeg_core.h b/drivers/media/platform/mtk-jpeg/mtk_jpeg_core.h
> index 595f7f10c9fd..3e4811a41ba2 100644
> --- a/drivers/media/platform/mtk-jpeg/mtk_jpeg_core.h
> +++ b/drivers/media/platform/mtk-jpeg/mtk_jpeg_core.h
> @@ -85,7 +85,6 @@ struct mtk_jpeg_variant {
> * @alloc_ctx: videobuf2 memory allocator's context
> * @vdev: video device node for jpeg mem2mem mode
> * @reg_base: JPEG registers mapping
> - * @larb: SMI device
> * @job_timeout_work: IRQ timeout structure
> * @variant: driver variant to be used
> */
> @@ -99,7 +98,6 @@ struct mtk_jpeg_dev {
> void *alloc_ctx;
> struct video_device *vdev;
> void __iomem *reg_base;
> - struct device *larb;
> struct delayed_work job_timeout_work;
> const struct mtk_jpeg_variant *variant;
> };
>

2021-07-14 08:32:08

by Dafna Hirschfeld

[permalink] [raw]
Subject: Re: [PATCH v6 07/11] drm/mediatek: Get rid of mtk_smi_larb_get/put



On 14.07.21 04:56, Yong Wu wrote:
> MediaTek IOMMU has already added the device_link between the consumer
> and smi-larb device. If the drm device call the pm_runtime_get_sync,
> the smi-larb's pm_runtime_get_sync also be called automatically.
>
> CC: CK Hu <[email protected]>
> CC: Philipp Zabel <[email protected]>
> Signed-off-by: Yong Wu <[email protected]>
> Reviewed-by: Evan Green <[email protected]>
> Acked-by: Chun-Kuang Hu <[email protected]>

Reviewed-by: Dafna Hirschfeld <[email protected]>

> ---
> drivers/gpu/drm/mediatek/mtk_drm_crtc.c | 9 ------
> drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c | 36 ++-------------------
> drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h | 1 -
> drivers/gpu/drm/mediatek/mtk_drm_drv.c | 5 +--
> 4 files changed, 3 insertions(+), 48 deletions(-)
>
> diff --git a/drivers/gpu/drm/mediatek/mtk_drm_crtc.c b/drivers/gpu/drm/mediatek/mtk_drm_crtc.c
> index 08e3f352377d..d046abcf66ce 100644
> --- a/drivers/gpu/drm/mediatek/mtk_drm_crtc.c
> +++ b/drivers/gpu/drm/mediatek/mtk_drm_crtc.c
> @@ -10,7 +10,6 @@
> #include <linux/soc/mediatek/mtk-mutex.h>
>
> #include <asm/barrier.h>
> -#include <soc/mediatek/smi.h>
>
> #include <drm/drm_atomic.h>
> #include <drm/drm_atomic_helper.h>
> @@ -551,12 +550,6 @@ static void mtk_drm_crtc_atomic_enable(struct drm_crtc *crtc,
>
> DRM_DEBUG_DRIVER("%s %d\n", __func__, crtc->base.id);
>
> - ret = mtk_smi_larb_get(comp->larb_dev);
> - if (ret) {
> - DRM_ERROR("Failed to get larb: %d\n", ret);
> - return;
> - }
> -
> ret = pm_runtime_resume_and_get(comp->dev);
> if (ret < 0)
> DRM_DEV_ERROR(comp->dev, "Failed to enable power domain: %d\n",
> @@ -564,7 +557,6 @@ static void mtk_drm_crtc_atomic_enable(struct drm_crtc *crtc,
>
> ret = mtk_crtc_ddp_hw_init(mtk_crtc);
> if (ret) {
> - mtk_smi_larb_put(comp->larb_dev);
> pm_runtime_put(comp->dev);
> return;
> }
> @@ -601,7 +593,6 @@ static void mtk_drm_crtc_atomic_disable(struct drm_crtc *crtc,
>
> drm_crtc_vblank_off(crtc);
> mtk_crtc_ddp_hw_fini(mtk_crtc);
> - mtk_smi_larb_put(comp->larb_dev);
> ret = pm_runtime_put(comp->dev);
> if (ret < 0)
> DRM_DEV_ERROR(comp->dev, "Failed to disable power domain: %d\n",
> diff --git a/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c b/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c
> index 75bc00e17fc4..7d240218d4c7 100644
> --- a/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c
> +++ b/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c
> @@ -449,37 +449,15 @@ unsigned int mtk_drm_find_possible_crtc_by_comp(struct drm_device *drm,
> return ret;
> }
>
> -static int mtk_ddp_get_larb_dev(struct device_node *node, struct mtk_ddp_comp *comp,
> - struct device *dev)
> -{
> - struct device_node *larb_node;
> - struct platform_device *larb_pdev;
> -
> - larb_node = of_parse_phandle(node, "mediatek,larb", 0);
> - if (!larb_node) {
> - dev_err(dev, "Missing mediadek,larb phandle in %pOF node\n", node);
> - return -EINVAL;
> - }
> -
> - larb_pdev = of_find_device_by_node(larb_node);
> - if (!larb_pdev) {
> - dev_warn(dev, "Waiting for larb device %pOF\n", larb_node);
> - of_node_put(larb_node);
> - return -EPROBE_DEFER;
> - }
> - of_node_put(larb_node);
> - comp->larb_dev = &larb_pdev->dev;
> -
> - return 0;
> -}
> -
> int mtk_ddp_comp_init(struct device_node *node, struct mtk_ddp_comp *comp,
> enum mtk_ddp_comp_id comp_id)
> {
> struct platform_device *comp_pdev;
> enum mtk_ddp_comp_type type;
> struct mtk_ddp_comp_dev *priv;
> +#if IS_REACHABLE(CONFIG_MTK_CMDQ)
> int ret;
> +#endif
>
> if (comp_id < 0 || comp_id >= DDP_COMPONENT_ID_MAX)
> return -EINVAL;
> @@ -495,16 +473,6 @@ int mtk_ddp_comp_init(struct device_node *node, struct mtk_ddp_comp *comp,
> }
> comp->dev = &comp_pdev->dev;
>
> - /* Only DMA capable components need the LARB property */
> - if (type == MTK_DISP_OVL ||
> - type == MTK_DISP_OVL_2L ||
> - type == MTK_DISP_RDMA ||
> - type == MTK_DISP_WDMA) {
> - ret = mtk_ddp_get_larb_dev(node, comp, comp->dev);
> - if (ret)
> - return ret;
> - }
> -
> if (type == MTK_DISP_BLS ||
> type == MTK_DISP_CCORR ||
> type == MTK_DISP_COLOR ||
> diff --git a/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h b/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h
> index bb914d976cf5..1b582262b682 100644
> --- a/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h
> +++ b/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h
> @@ -70,7 +70,6 @@ struct mtk_ddp_comp_funcs {
> struct mtk_ddp_comp {
> struct device *dev;
> int irq;
> - struct device *larb_dev;
> enum mtk_ddp_comp_id id;
> const struct mtk_ddp_comp_funcs *funcs;
> };
> diff --git a/drivers/gpu/drm/mediatek/mtk_drm_drv.c b/drivers/gpu/drm/mediatek/mtk_drm_drv.c
> index b46bdb8985da..0d5ef3d8d081 100644
> --- a/drivers/gpu/drm/mediatek/mtk_drm_drv.c
> +++ b/drivers/gpu/drm/mediatek/mtk_drm_drv.c
> @@ -577,11 +577,8 @@ static int mtk_drm_probe(struct platform_device *pdev)
> pm_runtime_disable(dev);
> err_node:
> of_node_put(private->mutex_node);
> - for (i = 0; i < DDP_COMPONENT_ID_MAX; i++) {
> + for (i = 0; i < DDP_COMPONENT_ID_MAX; i++)
> of_node_put(private->comp_node[i]);
> - if (private->ddp_comp[i].larb_dev)
> - put_device(private->ddp_comp[i].larb_dev);
> - }
> return ret;
> }
>
>

2021-07-14 08:32:35

by Dafna Hirschfeld

[permalink] [raw]
Subject: Re: [PATCH v6 05/11] media: mtk-mdp: Get rid of mtk_smi_larb_get/put



On 14.07.21 04:56, Yong Wu wrote:
> MediaTek IOMMU has already added the device_link between the consumer
> and smi-larb device. If the mdp device call the pm_runtime_get_sync,
> the smi-larb's pm_runtime_get_sync also be called automatically.
>
> CC: Minghsiu Tsai <[email protected]>
> CC: Houlong Wei <[email protected]>
> Signed-off-by: Yong Wu <[email protected]>
> Reviewed-by: Evan Green <[email protected]>
> Reviewed-by: Houlong Wei <[email protected]>

Reviewed-by: Dafna Hirschfeld <[email protected]>

> ---
> drivers/media/platform/mtk-mdp/mtk_mdp_comp.c | 46 +------------------
> drivers/media/platform/mtk-mdp/mtk_mdp_comp.h | 2 -
> drivers/media/platform/mtk-mdp/mtk_mdp_core.c | 1 -
> 3 files changed, 1 insertion(+), 48 deletions(-)
>
> diff --git a/drivers/media/platform/mtk-mdp/mtk_mdp_comp.c b/drivers/media/platform/mtk-mdp/mtk_mdp_comp.c
> index de2d425efdd1..5e0ea83a9f7f 100644
> --- a/drivers/media/platform/mtk-mdp/mtk_mdp_comp.c
> +++ b/drivers/media/platform/mtk-mdp/mtk_mdp_comp.c
> @@ -13,7 +13,6 @@
> #include <linux/of.h>
> #include <linux/of_irq.h>
> #include <linux/of_platform.h>
> -#include <soc/mediatek/smi.h>
> #include <linux/pm_runtime.h>
>
> #include "mtk_mdp_comp.h"
> @@ -57,13 +56,6 @@ int mtk_mdp_comp_power_on(struct mtk_mdp_comp *comp)
> {
> int status, err;
>
> - if (comp->larb_dev) {
> - err = mtk_smi_larb_get(comp->larb_dev);
> - if (err)
> - dev_err(comp->dev,
> - "failed to get larb, err %d.\n", err);
> - }
> -
> err = pm_runtime_get_sync(comp->dev);
> if (err < 0) {
> dev_err(comp->dev, "failed to runtime get, err %d.\n", err);
> @@ -146,9 +138,6 @@ void mtk_mdp_comp_clock_off(struct mtk_mdp_comp *comp)
> continue;
> clk_disable_unprepare(comp->clk[i]);
> }
> -
> - if (comp->larb_dev)
> - mtk_smi_larb_put(comp->larb_dev);
> }
>
> /*
> @@ -236,9 +225,6 @@ static const struct component_ops mtk_mdp_component_ops = {
>
> int mtk_mdp_comp_init(struct mtk_mdp_comp *comp, struct device *dev)
> {
> - struct device_node *larb_node;
> - struct platform_device *larb_pdev;
> - int ret;
> int i;
> struct device_node *node = dev->of_node;
> enum mtk_mdp_comp_type comp_type =
> @@ -252,8 +238,7 @@ int mtk_mdp_comp_init(struct mtk_mdp_comp *comp, struct device *dev)
> if (IS_ERR(comp->clk[i])) {
> if (PTR_ERR(comp->clk[i]) != -EPROBE_DEFER)
> dev_err(dev, "Failed to get clock\n");
> - ret = PTR_ERR(comp->clk[i]);
> - goto err;
> + return PTR_ERR(comp->clk[i]);
> }
>
> /* Only RDMA needs two clocks */
> @@ -261,36 +246,7 @@ int mtk_mdp_comp_init(struct mtk_mdp_comp *comp, struct device *dev)
> break;
> }
>
> - /* Only DMA capable components need the LARB property */
> - comp->larb_dev = NULL;
> - if (comp_type != MTK_MDP_RDMA &&
> - comp_type != MTK_MDP_WDMA &&
> - comp_type != MTK_MDP_WROT)
> - return 0;
> -
> - larb_node = of_parse_phandle(node, "mediatek,larb", 0);
> - if (!larb_node) {
> - dev_err(dev,
> - "Missing mediadek,larb phandle in %pOF node\n", node);
> - ret = -EINVAL;
> - goto err;
> - }
> -
> - larb_pdev = of_find_device_by_node(larb_node);
> - if (!larb_pdev) {
> - dev_warn(dev, "Waiting for larb device %pOF\n", larb_node);
> - of_node_put(larb_node);
> - ret = -EPROBE_DEFER;
> - goto err;
> - }
> - of_node_put(larb_node);
> -
> - comp->larb_dev = &larb_pdev->dev;
> -
> return 0;
> -
> -err:
> - return ret;
> }
>
> static int mtk_mdp_comp_probe(struct platform_device *pdev)
> diff --git a/drivers/media/platform/mtk-mdp/mtk_mdp_comp.h b/drivers/media/platform/mtk-mdp/mtk_mdp_comp.h
> index 5201c47f7baa..2bd229cc7eae 100644
> --- a/drivers/media/platform/mtk-mdp/mtk_mdp_comp.h
> +++ b/drivers/media/platform/mtk-mdp/mtk_mdp_comp.h
> @@ -11,13 +11,11 @@
> * struct mtk_mdp_comp - the MDP's function component data
> * @node: list node to track sibing MDP components
> * @clk: clocks required for component
> - * @larb_dev: SMI device required for component
> * @dev: component's device
> */
> struct mtk_mdp_comp {
> struct list_head node;
> struct clk *clk[2];
> - struct device *larb_dev;
> struct device *dev;
> };
>
> diff --git a/drivers/media/platform/mtk-mdp/mtk_mdp_core.c b/drivers/media/platform/mtk-mdp/mtk_mdp_core.c
> index e1fb39231248..be7d35b3e3ff 100644
> --- a/drivers/media/platform/mtk-mdp/mtk_mdp_core.c
> +++ b/drivers/media/platform/mtk-mdp/mtk_mdp_core.c
> @@ -18,7 +18,6 @@
> #include <linux/platform_device.h>
> #include <linux/pm_runtime.h>
> #include <linux/workqueue.h>
> -#include <soc/mediatek/smi.h>
>
> #include "mtk_mdp_comp.h"
> #include "mtk_mdp_core.h"
>

2021-07-14 08:32:54

by Dafna Hirschfeld

[permalink] [raw]
Subject: Re: [PATCH v6 08/11] media: mtk-vcodec: Get rid of mtk_smi_larb_get/put



On 14.07.21 04:56, Yong Wu wrote:
> MediaTek IOMMU has already added the device_link between the consumer
> and smi-larb device. If the vcodec device call the pm_runtime_get_sync,
> the smi-larb's pm_runtime_get_sync also be called automatically.
>
> CC: Tiffany Lin <[email protected]>
> CC: Irui Wang <[email protected]>
> Signed-off-by: Yong Wu <[email protected]>
> Reviewed-by: Evan Green <[email protected]>
> Acked-by: Tiffany Lin <[email protected]>

Reviewed-by: Dafna Hirschfeld <[email protected]>

> ---
> .../platform/mtk-vcodec/mtk_vcodec_dec_pm.c | 37 +++-------------
> .../platform/mtk-vcodec/mtk_vcodec_drv.h | 3 --
> .../platform/mtk-vcodec/mtk_vcodec_enc.c | 1 -
> .../platform/mtk-vcodec/mtk_vcodec_enc_pm.c | 44 +++----------------
> 4 files changed, 10 insertions(+), 75 deletions(-)
>
> diff --git a/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_pm.c b/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_pm.c
> index 6038db96f71c..d0bf9aa3b29d 100644
> --- a/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_pm.c
> +++ b/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_pm.c
> @@ -8,14 +8,12 @@
> #include <linux/of_address.h>
> #include <linux/of_platform.h>
> #include <linux/pm_runtime.h>
> -#include <soc/mediatek/smi.h>
>
> #include "mtk_vcodec_dec_pm.h"
> #include "mtk_vcodec_util.h"
>
> int mtk_vcodec_init_dec_pm(struct mtk_vcodec_dev *mtkdev)
> {
> - struct device_node *node;
> struct platform_device *pdev;
> struct mtk_vcodec_pm *pm;
> struct mtk_vcodec_clk *dec_clk;
> @@ -26,18 +24,7 @@ int mtk_vcodec_init_dec_pm(struct mtk_vcodec_dev *mtkdev)
> pm = &mtkdev->pm;
> pm->mtkdev = mtkdev;
> dec_clk = &pm->vdec_clk;
> - node = of_parse_phandle(pdev->dev.of_node, "mediatek,larb", 0);
> - if (!node) {
> - mtk_v4l2_err("of_parse_phandle mediatek,larb fail!");
> - return -1;
> - }
>
> - pdev = of_find_device_by_node(node);
> - of_node_put(node);
> - if (WARN_ON(!pdev)) {
> - return -1;
> - }
> - pm->larbvdec = &pdev->dev;
> pdev = mtkdev->plat_dev;
> pm->dev = &pdev->dev;
>
> @@ -47,14 +34,11 @@ int mtk_vcodec_init_dec_pm(struct mtk_vcodec_dev *mtkdev)
> dec_clk->clk_info = devm_kcalloc(&pdev->dev,
> dec_clk->clk_num, sizeof(*clk_info),
> GFP_KERNEL);
> - if (!dec_clk->clk_info) {
> - ret = -ENOMEM;
> - goto put_device;
> - }
> + if (!dec_clk->clk_info)
> + return -ENOMEM;
> } else {
> mtk_v4l2_err("Failed to get vdec clock count");
> - ret = -EINVAL;
> - goto put_device;
> + return -EINVAL;
> }
>
> for (i = 0; i < dec_clk->clk_num; i++) {
> @@ -63,29 +47,24 @@ int mtk_vcodec_init_dec_pm(struct mtk_vcodec_dev *mtkdev)
> "clock-names", i, &clk_info->clk_name);
> if (ret) {
> mtk_v4l2_err("Failed to get clock name id = %d", i);
> - goto put_device;
> + return ret;
> }
> clk_info->vcodec_clk = devm_clk_get(&pdev->dev,
> clk_info->clk_name);
> if (IS_ERR(clk_info->vcodec_clk)) {
> mtk_v4l2_err("devm_clk_get (%d)%s fail", i,
> clk_info->clk_name);
> - ret = PTR_ERR(clk_info->vcodec_clk);
> - goto put_device;
> + return PTR_ERR(clk_info->vcodec_clk);
> }
> }
>
> pm_runtime_enable(&pdev->dev);
> return 0;
> -put_device:
> - put_device(pm->larbvdec);
> - return ret;
> }
>
> void mtk_vcodec_release_dec_pm(struct mtk_vcodec_dev *dev)
> {
> pm_runtime_disable(dev->pm.dev);
> - put_device(dev->pm.larbvdec);
> }
>
> int mtk_vcodec_dec_pw_on(struct mtk_vcodec_pm *pm)
> @@ -122,11 +101,6 @@ void mtk_vcodec_dec_clock_on(struct mtk_vcodec_pm *pm)
> }
> }
>
> - ret = mtk_smi_larb_get(pm->larbvdec);
> - if (ret) {
> - mtk_v4l2_err("mtk_smi_larb_get larbvdec fail %d", ret);
> - goto error;
> - }
> return;
>
> error:
> @@ -139,7 +113,6 @@ void mtk_vcodec_dec_clock_off(struct mtk_vcodec_pm *pm)
> struct mtk_vcodec_clk *dec_clk = &pm->vdec_clk;
> int i = 0;
>
> - mtk_smi_larb_put(pm->larbvdec);
> for (i = dec_clk->clk_num - 1; i >= 0; i--)
> clk_disable_unprepare(dec_clk->clk_info[i].vcodec_clk);
> }
> diff --git a/drivers/media/platform/mtk-vcodec/mtk_vcodec_drv.h b/drivers/media/platform/mtk-vcodec/mtk_vcodec_drv.h
> index c6c7672fecfb..64b73dd880ce 100644
> --- a/drivers/media/platform/mtk-vcodec/mtk_vcodec_drv.h
> +++ b/drivers/media/platform/mtk-vcodec/mtk_vcodec_drv.h
> @@ -189,10 +189,7 @@ struct mtk_vcodec_clk {
> */
> struct mtk_vcodec_pm {
> struct mtk_vcodec_clk vdec_clk;
> - struct device *larbvdec;
> -
> struct mtk_vcodec_clk venc_clk;
> - struct device *larbvenc;
> struct device *dev;
> struct mtk_vcodec_dev *mtkdev;
> };
> diff --git a/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc.c b/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc.c
> index 416f356af363..9a1515cf862d 100644
> --- a/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc.c
> +++ b/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc.c
> @@ -8,7 +8,6 @@
> #include <media/v4l2-event.h>
> #include <media/v4l2-mem2mem.h>
> #include <media/videobuf2-dma-contig.h>
> -#include <soc/mediatek/smi.h>
> #include <linux/pm_runtime.h>
>
> #include "mtk_vcodec_drv.h"
> diff --git a/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc_pm.c b/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc_pm.c
> index 1b2e4930ed27..dffb190267ed 100644
> --- a/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc_pm.c
> +++ b/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc_pm.c
> @@ -8,58 +8,36 @@
> #include <linux/of_address.h>
> #include <linux/of_platform.h>
> #include <linux/pm_runtime.h>
> -#include <soc/mediatek/smi.h>
>
> #include "mtk_vcodec_enc_pm.h"
> #include "mtk_vcodec_util.h"
>
> int mtk_vcodec_init_enc_pm(struct mtk_vcodec_dev *mtkdev)
> {
> - struct device_node *node;
> struct platform_device *pdev;
> struct mtk_vcodec_pm *pm;
> struct mtk_vcodec_clk *enc_clk;
> struct mtk_vcodec_clk_info *clk_info;
> int ret = 0, i = 0;
> - struct device *dev;
>
> pdev = mtkdev->plat_dev;
> pm = &mtkdev->pm;
> memset(pm, 0, sizeof(struct mtk_vcodec_pm));
> pm->mtkdev = mtkdev;
> pm->dev = &pdev->dev;
> - dev = &pdev->dev;
> enc_clk = &pm->venc_clk;
>
> - node = of_parse_phandle(dev->of_node, "mediatek,larb", 0);
> - if (!node) {
> - mtk_v4l2_err("no mediatek,larb found");
> - return -ENODEV;
> - }
> - pdev = of_find_device_by_node(node);
> - of_node_put(node);
> - if (!pdev) {
> - mtk_v4l2_err("no mediatek,larb device found");
> - return -ENODEV;
> - }
> - pm->larbvenc = &pdev->dev;
> - pdev = mtkdev->plat_dev;
> - pm->dev = &pdev->dev;
> -
> enc_clk->clk_num = of_property_count_strings(pdev->dev.of_node,
> "clock-names");
> if (enc_clk->clk_num > 0) {
> enc_clk->clk_info = devm_kcalloc(&pdev->dev,
> enc_clk->clk_num, sizeof(*clk_info),
> GFP_KERNEL);
> - if (!enc_clk->clk_info) {
> - ret = -ENOMEM;
> - goto put_larbvenc;
> - }
> + if (!enc_clk->clk_info)
> + return -ENOMEM;
> } else {
> mtk_v4l2_err("Failed to get venc clock count");
> - ret = -EINVAL;
> - goto put_larbvenc;
> + return -EINVAL;
> }
>
> for (i = 0; i < enc_clk->clk_num; i++) {
> @@ -68,29 +46,23 @@ int mtk_vcodec_init_enc_pm(struct mtk_vcodec_dev *mtkdev)
> "clock-names", i, &clk_info->clk_name);
> if (ret) {
> mtk_v4l2_err("venc failed to get clk name %d", i);
> - goto put_larbvenc;
> + return ret;
> }
> clk_info->vcodec_clk = devm_clk_get(&pdev->dev,
> clk_info->clk_name);
> if (IS_ERR(clk_info->vcodec_clk)) {
> mtk_v4l2_err("venc devm_clk_get (%d)%s fail", i,
> clk_info->clk_name);
> - ret = PTR_ERR(clk_info->vcodec_clk);
> - goto put_larbvenc;
> + return PTR_ERR(clk_info->vcodec_clk);
> }
> }
>
> return 0;
> -
> -put_larbvenc:
> - put_device(pm->larbvenc);
> - return ret;
> }
>
> void mtk_vcodec_release_enc_pm(struct mtk_vcodec_dev *mtkdev)
> {
> pm_runtime_disable(mtkdev->pm.dev);
> - put_device(mtkdev->pm.larbvenc);
> }
>
>
> @@ -108,11 +80,6 @@ void mtk_vcodec_enc_clock_on(struct mtk_vcodec_pm *pm)
> }
> }
>
> - ret = mtk_smi_larb_get(pm->larbvenc);
> - if (ret) {
> - mtk_v4l2_err("mtk_smi_larb_get larb3 fail %d", ret);
> - goto clkerr;
> - }
> return;
>
> clkerr:
> @@ -125,7 +92,6 @@ void mtk_vcodec_enc_clock_off(struct mtk_vcodec_pm *pm)
> struct mtk_vcodec_clk *enc_clk = &pm->venc_clk;
> int i = 0;
>
> - mtk_smi_larb_put(pm->larbvenc);
> for (i = enc_clk->clk_num - 1; i >= 0; i--)
> clk_disable_unprepare(enc_clk->clk_info[i].vcodec_clk);
> }
>

2021-07-14 08:33:55

by Dafna Hirschfeld

[permalink] [raw]
Subject: Re: [PATCH v6 09/11] memory: mtk-smi: Get rid of mtk_smi_larb_get/put



On 14.07.21 04:56, Yong Wu wrote:
> After adding device_link between the iommu consumer and smi-larb,
> the pm_runtime_get(_sync) of smi-larb and smi-common will be called
> automatically. we can get rid of mtk_smi_larb_get/put.
>
> CC: Matthias Brugger <[email protected]>
> Signed-off-by: Yong Wu <[email protected]>
> Reviewed-by: Evan Green <[email protected]>
> Acked-by: Krzysztof Kozlowski <[email protected]>
> Acked-by: Matthias Brugger <[email protected]>

Reviewed-by: Dafna Hirschfeld <[email protected]>

> ---
> drivers/memory/mtk-smi.c | 14 --------------
> include/soc/mediatek/smi.h | 20 --------------------
> 2 files changed, 34 deletions(-)
>
> diff --git a/drivers/memory/mtk-smi.c b/drivers/memory/mtk-smi.c
> index c5fb51f73b34..7c61c924e220 100644
> --- a/drivers/memory/mtk-smi.c
> +++ b/drivers/memory/mtk-smi.c
> @@ -134,20 +134,6 @@ static void mtk_smi_clk_disable(const struct mtk_smi *smi)
> clk_disable_unprepare(smi->clk_apb);
> }
>
> -int mtk_smi_larb_get(struct device *larbdev)
> -{
> - int ret = pm_runtime_resume_and_get(larbdev);
> -
> - return (ret < 0) ? ret : 0;
> -}
> -EXPORT_SYMBOL_GPL(mtk_smi_larb_get);
> -
> -void mtk_smi_larb_put(struct device *larbdev)
> -{
> - pm_runtime_put_sync(larbdev);
> -}
> -EXPORT_SYMBOL_GPL(mtk_smi_larb_put);
> -
> static int
> mtk_smi_larb_bind(struct device *dev, struct device *master, void *data)
> {
> diff --git a/include/soc/mediatek/smi.h b/include/soc/mediatek/smi.h
> index 15e3397cec58..11f7d6b59642 100644
> --- a/include/soc/mediatek/smi.h
> +++ b/include/soc/mediatek/smi.h
> @@ -19,26 +19,6 @@ struct mtk_smi_larb_iommu {
> unsigned char bank[32];
> };
>
> -/*
> - * mtk_smi_larb_get: Enable the power domain and clocks for this local arbiter.
> - * It also initialize some basic setting(like iommu).
> - * mtk_smi_larb_put: Disable the power domain and clocks for this local arbiter.
> - * Both should be called in non-atomic context.
> - *
> - * Returns 0 if successful, negative on failure.
> - */
> -int mtk_smi_larb_get(struct device *larbdev);
> -void mtk_smi_larb_put(struct device *larbdev);
> -
> -#else
> -
> -static inline int mtk_smi_larb_get(struct device *larbdev)
> -{
> - return 0;
> -}
> -
> -static inline void mtk_smi_larb_put(struct device *larbdev) { }
> -
> #endif
>
> #endif
>

2021-07-14 08:45:02

by Dafna Hirschfeld

[permalink] [raw]
Subject: Re: [PATCH v6 06/11] drm/mediatek: Add pm runtime support for ovl and rdma



On 14.07.21 04:56, Yong Wu wrote:
> From: Yongqiang Niu <[email protected]>
>
> Prepare for smi cleaning up "mediatek,larb".
>
> Display use the dispsys device to call pm_rumtime_get_sync before.
> This patch add pm_runtime_xx with ovl and rdma device whose nodes has
> "iommus" property, then display could help pm_runtime_get for smi via
> ovl or rdma device.
>
> CC: CK Hu <[email protected]>
> Signed-off-by: Yongqiang Niu <[email protected]>
> Signed-off-by: Yong Wu <[email protected]>
> (Yong: Use pm_runtime_resume_and_get instead of pm_runtime_get_sync)
> Acked-by: Chun-Kuang Hu <[email protected]>
> ---
> drivers/gpu/drm/mediatek/mtk_disp_ovl.c | 9 ++++++++-
> drivers/gpu/drm/mediatek/mtk_disp_rdma.c | 9 ++++++++-
> drivers/gpu/drm/mediatek/mtk_drm_crtc.c | 12 +++++++++++-
> 3 files changed, 27 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/gpu/drm/mediatek/mtk_disp_ovl.c b/drivers/gpu/drm/mediatek/mtk_disp_ovl.c
> index fa9d79963cd3..ea5760f856ec 100644
> --- a/drivers/gpu/drm/mediatek/mtk_disp_ovl.c
> +++ b/drivers/gpu/drm/mediatek/mtk_disp_ovl.c
> @@ -11,6 +11,7 @@
> #include <linux/of_device.h>
> #include <linux/of_irq.h>
> #include <linux/platform_device.h>
> +#include <linux/pm_runtime.h>
> #include <linux/soc/mediatek/mtk-cmdq.h>
>
> #include "mtk_disp_drv.h"
> @@ -414,15 +415,21 @@ static int mtk_disp_ovl_probe(struct platform_device *pdev)
> return ret;
> }
>
> + pm_runtime_enable(dev);
> +
> ret = component_add(dev, &mtk_disp_ovl_component_ops);
> - if (ret)
> + if (ret) {
> + pm_runtime_disable(dev);
> dev_err(dev, "Failed to add component: %d\n", ret);
> + }
>
> return ret;
> }
>
> static int mtk_disp_ovl_remove(struct platform_device *pdev)
> {
> + pm_runtime_disable(&pdev->dev);
> +
> return 0;
> }
>
> diff --git a/drivers/gpu/drm/mediatek/mtk_disp_rdma.c b/drivers/gpu/drm/mediatek/mtk_disp_rdma.c
> index 705f28ceb4dd..0f31d1c8e37c 100644
> --- a/drivers/gpu/drm/mediatek/mtk_disp_rdma.c
> +++ b/drivers/gpu/drm/mediatek/mtk_disp_rdma.c
> @@ -9,6 +9,7 @@
> #include <linux/of_device.h>
> #include <linux/of_irq.h>
> #include <linux/platform_device.h>
> +#include <linux/pm_runtime.h>
> #include <linux/soc/mediatek/mtk-cmdq.h>
>
> #include "mtk_disp_drv.h"
> @@ -327,9 +328,13 @@ static int mtk_disp_rdma_probe(struct platform_device *pdev)
>
> platform_set_drvdata(pdev, priv);
>
> + pm_runtime_enable(dev);
> +
> ret = component_add(dev, &mtk_disp_rdma_component_ops);
> - if (ret)
> + if (ret) {
> + pm_runtime_disable(dev);
> dev_err(dev, "Failed to add component: %d\n", ret);
> + }
>
> return ret;
> }
> @@ -338,6 +343,8 @@ static int mtk_disp_rdma_remove(struct platform_device *pdev)
> {
> component_del(&pdev->dev, &mtk_disp_rdma_component_ops);
>
> + pm_runtime_disable(&pdev->dev);
> +
> return 0;
> }
>
> diff --git a/drivers/gpu/drm/mediatek/mtk_drm_crtc.c b/drivers/gpu/drm/mediatek/mtk_drm_crtc.c
> index 474efb844249..08e3f352377d 100644
> --- a/drivers/gpu/drm/mediatek/mtk_drm_crtc.c
> +++ b/drivers/gpu/drm/mediatek/mtk_drm_crtc.c
> @@ -557,9 +557,15 @@ static void mtk_drm_crtc_atomic_enable(struct drm_crtc *crtc,
> return;
> }
>
> + ret = pm_runtime_resume_and_get(comp->dev);
> + if (ret < 0)
> + DRM_DEV_ERROR(comp->dev, "Failed to enable power domain: %d\n",
> + ret);

shouldn't the code return in case of failure here?

Thanks,
Dafna

> +
> ret = mtk_crtc_ddp_hw_init(mtk_crtc);
> if (ret) {
> mtk_smi_larb_put(comp->larb_dev);
> + pm_runtime_put(comp->dev);
> return;
> }
>
> @@ -572,7 +578,7 @@ static void mtk_drm_crtc_atomic_disable(struct drm_crtc *crtc,
> {
> struct mtk_drm_crtc *mtk_crtc = to_mtk_crtc(crtc);
> struct mtk_ddp_comp *comp = mtk_crtc->ddp_comp[0];
> - int i;
> + int i, ret;
>
> DRM_DEBUG_DRIVER("%s %d\n", __func__, crtc->base.id);
> if (!mtk_crtc->enabled)
> @@ -596,6 +602,10 @@ static void mtk_drm_crtc_atomic_disable(struct drm_crtc *crtc,
> drm_crtc_vblank_off(crtc);
> mtk_crtc_ddp_hw_fini(mtk_crtc);
> mtk_smi_larb_put(comp->larb_dev);
> + ret = pm_runtime_put(comp->dev);
> + if (ret < 0)
> + DRM_DEV_ERROR(comp->dev, "Failed to disable power domain: %d\n",
> + ret);
>
> mtk_crtc->enabled = false;
> }
>

2021-07-14 08:50:55

by Dafna Hirschfeld

[permalink] [raw]
Subject: Re: [PATCH v6 01/11] dt-binding: mediatek: Get rid of mediatek, larb for multimedia HW



On 14.07.21 10:13, Dafna Hirschfeld wrote:
> Hi,
> thanks for the patch
>
> On 14.07.21 04:56, Yong Wu wrote:
>> After adding device_link between the consumer with the smi-larbs,
>> if the consumer call its owner pm_runtime_get(_sync), the
>> pm_runtime_get(_sync) of smi-larb and smi-common will be called
>> automatically. Thus, the consumer don't need the property.
>>
>> And IOMMU also know which larb this consumer connects with from
>> iommu id in the "iommus=" property.
>>
>> Signed-off-by: Yong Wu <[email protected]>
>> Reviewed-by: Rob Herring <[email protected]>
>> Reviewed-by: Evan Green <[email protected]>
>> ---
>>   .../bindings/display/mediatek/mediatek,disp.txt          | 9 ---------
>>   .../devicetree/bindings/media/mediatek-jpeg-decoder.yaml | 9 ---------
>>   .../devicetree/bindings/media/mediatek-jpeg-encoder.yaml | 9 ---------
>
> On which repo are these patches based on ?
> In linux-next the file mediatek-jpeg-encoder.yaml don't exist
>
> Thanks,
> Dafna

sorry, I see you reference the patch that convert to yaml in the cover letter.

Thanks,
Dafna

>
>>   Documentation/devicetree/bindings/media/mediatek-mdp.txt | 8 --------
>>   .../devicetree/bindings/media/mediatek-vcodec.txt        | 4 ----
>>   5 files changed, 39 deletions(-)
>>
>> diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,disp.txt b/Documentation/devicetree/bindings/display/mediatek/mediatek,disp.txt
>> index fbb59c9ddda6..867bd82e2f03 100644
>> --- a/Documentation/devicetree/bindings/display/mediatek/mediatek,disp.txt
>> +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,disp.txt
>> @@ -61,8 +61,6 @@ Required properties (DMA function blocks):
>>       "mediatek,<chip>-disp-rdma"
>>       "mediatek,<chip>-disp-wdma"
>>     the supported chips are mt2701, mt8167 and mt8173.
>> -- larb: Should contain a phandle pointing to the local arbiter device as defined
>> -  in Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml
>>   - iommus: Should point to the respective IOMMU block with master port as
>>     argument, see Documentation/devicetree/bindings/iommu/mediatek,iommu.yaml
>>     for details.
>> @@ -91,7 +89,6 @@ ovl0: ovl@1400c000 {
>>       power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
>>       clocks = <&mmsys CLK_MM_DISP_OVL0>;
>>       iommus = <&iommu M4U_PORT_DISP_OVL0>;
>> -    mediatek,larb = <&larb0>;
>>   };
>>   ovl1: ovl@1400d000 {
>> @@ -101,7 +98,6 @@ ovl1: ovl@1400d000 {
>>       power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
>>       clocks = <&mmsys CLK_MM_DISP_OVL1>;
>>       iommus = <&iommu M4U_PORT_DISP_OVL1>;
>> -    mediatek,larb = <&larb4>;
>>   };
>>   rdma0: rdma@1400e000 {
>> @@ -111,7 +107,6 @@ rdma0: rdma@1400e000 {
>>       power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
>>       clocks = <&mmsys CLK_MM_DISP_RDMA0>;
>>       iommus = <&iommu M4U_PORT_DISP_RDMA0>;
>> -    mediatek,larb = <&larb0>;
>>       mediatek,rdma-fifosize = <8192>;
>>   };
>> @@ -122,7 +117,6 @@ rdma1: rdma@1400f000 {
>>       power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
>>       clocks = <&mmsys CLK_MM_DISP_RDMA1>;
>>       iommus = <&iommu M4U_PORT_DISP_RDMA1>;
>> -    mediatek,larb = <&larb4>;
>>   };
>>   rdma2: rdma@14010000 {
>> @@ -132,7 +126,6 @@ rdma2: rdma@14010000 {
>>       power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
>>       clocks = <&mmsys CLK_MM_DISP_RDMA2>;
>>       iommus = <&iommu M4U_PORT_DISP_RDMA2>;
>> -    mediatek,larb = <&larb4>;
>>   };
>>   wdma0: wdma@14011000 {
>> @@ -142,7 +135,6 @@ wdma0: wdma@14011000 {
>>       power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
>>       clocks = <&mmsys CLK_MM_DISP_WDMA0>;
>>       iommus = <&iommu M4U_PORT_DISP_WDMA0>;
>> -    mediatek,larb = <&larb0>;
>>   };
>>   wdma1: wdma@14012000 {
>> @@ -152,7 +144,6 @@ wdma1: wdma@14012000 {
>>       power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
>>       clocks = <&mmsys CLK_MM_DISP_WDMA1>;
>>       iommus = <&iommu M4U_PORT_DISP_WDMA1>;
>> -    mediatek,larb = <&larb4>;
>>   };
>>   color0: color@14013000 {
>> diff --git a/Documentation/devicetree/bindings/media/mediatek-jpeg-decoder.yaml b/Documentation/devicetree/bindings/media/mediatek-jpeg-decoder.yaml
>> index 9b87f036f178..052e752157b4 100644
>> --- a/Documentation/devicetree/bindings/media/mediatek-jpeg-decoder.yaml
>> +++ b/Documentation/devicetree/bindings/media/mediatek-jpeg-decoder.yaml
>> @@ -42,13 +42,6 @@ properties:
>>     power-domains:
>>       maxItems: 1
>> -  mediatek,larb:
>> -    $ref: '/schemas/types.yaml#/definitions/phandle'
>> -    description: |
>> -      Must contain the local arbiters in the current Socs, see
>> -      Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml
>> -      for details.
>> -
>>     iommus:
>>       maxItems: 2
>>       description: |
>> @@ -63,7 +56,6 @@ required:
>>     - clocks
>>     - clock-names
>>     - power-domains
>> -  - mediatek,larb
>>     - iommus
>>   additionalProperties: false
>> @@ -83,7 +75,6 @@ examples:
>>         clock-names = "jpgdec-smi",
>>                       "jpgdec";
>>         power-domains = <&scpsys MT2701_POWER_DOMAIN_ISP>;
>> -      mediatek,larb = <&larb2>;
>>         iommus = <&iommu MT2701_M4U_PORT_JPGDEC_WDMA>,
>>                  <&iommu MT2701_M4U_PORT_JPGDEC_BSDMA>;
>>       };
>> diff --git a/Documentation/devicetree/bindings/media/mediatek-jpeg-encoder.yaml b/Documentation/devicetree/bindings/media/mediatek-jpeg-encoder.yaml
>> index fcd9b829e036..8bfdfdfaba59 100644
>> --- a/Documentation/devicetree/bindings/media/mediatek-jpeg-encoder.yaml
>> +++ b/Documentation/devicetree/bindings/media/mediatek-jpeg-encoder.yaml
>> @@ -35,13 +35,6 @@ properties:
>>     power-domains:
>>       maxItems: 1
>> -  mediatek,larb:
>> -    $ref: '/schemas/types.yaml#/definitions/phandle'
>> -    description: |
>> -      Must contain the local arbiters in the current Socs, see
>> -      Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml
>> -      for details.
>> -
>>     iommus:
>>       maxItems: 2
>>       description: |
>> @@ -56,7 +49,6 @@ required:
>>     - clocks
>>     - clock-names
>>     - power-domains
>> -  - mediatek,larb
>>     - iommus
>>   additionalProperties: false
>> @@ -75,7 +67,6 @@ examples:
>>         clocks =  <&imgsys CLK_IMG_VENC>;
>>         clock-names = "jpgenc";
>>         power-domains = <&scpsys MT2701_POWER_DOMAIN_ISP>;
>> -      mediatek,larb = <&larb2>;
>>         iommus = <&iommu MT2701_M4U_PORT_JPGENC_RDMA>,
>>                  <&iommu MT2701_M4U_PORT_JPGENC_BSDMA>;
>>       };
>> diff --git a/Documentation/devicetree/bindings/media/mediatek-mdp.txt b/Documentation/devicetree/bindings/media/mediatek-mdp.txt
>> index caa24943da33..53ef26e2c857 100644
>> --- a/Documentation/devicetree/bindings/media/mediatek-mdp.txt
>> +++ b/Documentation/devicetree/bindings/media/mediatek-mdp.txt
>> @@ -27,9 +27,6 @@ Required properties (DMA function blocks, child node):
>>   - iommus: should point to the respective IOMMU block with master port as
>>     argument, see Documentation/devicetree/bindings/iommu/mediatek,iommu.yaml
>>     for details.
>> -- mediatek,larb: must contain the local arbiters in the current Socs, see
>> -  Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml
>> -  for details.
>>   Example:
>>       mdp_rdma0: rdma@14001000 {
>> @@ -40,7 +37,6 @@ Example:
>>                <&mmsys CLK_MM_MUTEX_32K>;
>>           power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
>>           iommus = <&iommu M4U_PORT_MDP_RDMA0>;
>> -        mediatek,larb = <&larb0>;
>>           mediatek,vpu = <&vpu>;
>>       };
>> @@ -51,7 +47,6 @@ Example:
>>                <&mmsys CLK_MM_MUTEX_32K>;
>>           power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
>>           iommus = <&iommu M4U_PORT_MDP_RDMA1>;
>> -        mediatek,larb = <&larb4>;
>>       };
>>       mdp_rsz0: rsz@14003000 {
>> @@ -81,7 +76,6 @@ Example:
>>           clocks = <&mmsys CLK_MM_MDP_WDMA>;
>>           power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
>>           iommus = <&iommu M4U_PORT_MDP_WDMA>;
>> -        mediatek,larb = <&larb0>;
>>       };
>>       mdp_wrot0: wrot@14007000 {
>> @@ -90,7 +84,6 @@ Example:
>>           clocks = <&mmsys CLK_MM_MDP_WROT0>;
>>           power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
>>           iommus = <&iommu M4U_PORT_MDP_WROT0>;
>> -        mediatek,larb = <&larb0>;
>>       };
>>       mdp_wrot1: wrot@14008000 {
>> @@ -99,5 +92,4 @@ Example:
>>           clocks = <&mmsys CLK_MM_MDP_WROT1>;
>>           power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
>>           iommus = <&iommu M4U_PORT_MDP_WROT1>;
>> -        mediatek,larb = <&larb4>;
>>       };
>> diff --git a/Documentation/devicetree/bindings/media/mediatek-vcodec.txt b/Documentation/devicetree/bindings/media/mediatek-vcodec.txt
>> index ad1321e5a22d..71237355cc7e 100644
>> --- a/Documentation/devicetree/bindings/media/mediatek-vcodec.txt
>> +++ b/Documentation/devicetree/bindings/media/mediatek-vcodec.txt
>> @@ -13,7 +13,6 @@ Required properties:
>>   - reg : Physical base address of the video codec registers and length of
>>     memory mapped region.
>>   - interrupts : interrupt number to the cpu.
>> -- mediatek,larb : must contain the local arbiters in the current Socs.
>>   - clocks : list of clock specifiers, corresponding to entries in
>>     the clock-names property.
>>   - clock-names: avc encoder must contain "venc_sel", vp8 encoder must
>> @@ -46,7 +45,6 @@ vcodec_dec: vcodec@16000000 {
>>             <0 0x16027800 0 0x800>,   /*VP8_VL*/
>>             <0 0x16028400 0 0x400>;   /*VP9_VD*/
>>       interrupts = <GIC_SPI 204 IRQ_TYPE_LEVEL_LOW>;
>> -    mediatek,larb = <&larb1>;
>>       iommus = <&iommu M4U_PORT_HW_VDEC_MC_EXT>,
>>                <&iommu M4U_PORT_HW_VDEC_PP_EXT>,
>>                <&iommu M4U_PORT_HW_VDEC_AVC_MV_EXT>,
>> @@ -99,7 +97,6 @@ vcodec_enc_avc: vcodec@18002000 {
>>                <&iommu M4U_PORT_VENC_REF_CHROMA>,
>>                <&iommu M4U_PORT_VENC_NBM_RDMA>,
>>                <&iommu M4U_PORT_VENC_NBM_WDMA>;
>> -    mediatek,larb = <&larb3>;
>>       mediatek,vpu = <&vpu>;
>>       clocks = <&topckgen CLK_TOP_VENC_SEL>;
>>       clock-names = "venc_sel";
>> @@ -120,7 +117,6 @@ vcodec_enc_vp8: vcodec@19002000 {
>>                <&iommu M4U_PORT_VENC_CUR_CHROMA_SET2>,
>>                <&iommu M4U_PORT_VENC_REF_LUMA_SET2>,
>>                <&iommu M4U_PORT_VENC_REC_CHROMA_SET2>;
>> -    mediatek,larb = <&larb5>;
>>       mediatek,vpu = <&vpu>;
>>       clocks = <&topckgen CLK_TOP_VENC_LT_SEL>;
>>       clock-names = "venc_lt_sel";
>>

2021-07-14 08:58:03

by Dafna Hirschfeld

[permalink] [raw]
Subject: Re: [PATCH v6 00/11] Clean up "mediatek,larb"

Hi

Thanks for the patchset.

I tested it on mt8173 (elm) with chromeos userspace.
Before that patchset, the test:

tast -verbose run -build=false 10.42.0.175 video.DecodeAccel.h264

sometimes passed and sometimes failed with 'context deadline exceeded'.
With this patchset it seems that the test always passes so I added tested-by:

Tested-by: Dafna Hirschfeld <[email protected]>

Thanks,
Dafna




On 14.07.21 04:56, Yong Wu wrote:
> MediaTek IOMMU block diagram always like below:
>
> M4U
> |
> smi-common
> |
> -------------
> | | ...
> | |
> larb1 larb2
> | |
> vdec venc
>
> All the consumer connect with smi-larb, then connect with smi-common.
>
> When the consumer works, it should enable the smi-larb's power which also
> need enable the smi-common's power firstly.
>
> Thus, Firstly, use the device link connect the consumer and the
> smi-larbs. then add device link between the smi-larb and smi-common.
>
> After adding the device_link, then "mediatek,larb" property can be removed.
> the iommu consumer don't need call the mtk_smi_larb_get/put to enable
> the power and clock of smi-larb and smi-common.
>
> About the MM dt-binding/dtsi patches, I guess they should go together, thus
> I don't split them for each a MM module and each a SoC.
>
> Base on v5.14-rc1, and a jpeg[1] and mdp[2] patchset.
>
> [1] https://lore.kernel.org/linux-mediatek/[email protected]/
> [2] https://lore.kernel.org/linux-mediatek/[email protected]/
>
> Change notes:
> v6: 1) rebase on v5.14-rc1.
> 2) Fix the issue commented in v5 from Dafna and Hsin-Yi.
> 3) Remove the patches about using pm_runtime_resume_and_get since they have
> already been merged by other patches.
>
> v5: https://lore.kernel.org/linux-mediatek/[email protected]/
> 1) Base v5.12-rc2.
> 2) Remove changing the mtk-iommu to module_platform_driver patch, It have already been a
> independent patch.
>
> v4: https://lore.kernel.org/linux-mediatek/[email protected]/
> base on v5.7-rc1.
> 1) Move drm PM patch before smi patchs.
> 2) Change builtin_platform_driver to module_platform_driver since we may need
> build as module.
> 3) Rebase many patchset as above.
>
> v3: https://lore.kernel.org/linux-iommu/[email protected]/
> 1) rebase on v5.3-rc1 and the latest mt8183 patchset.
> 2) Use device_is_bound to check whether the driver is ready from Matthias.
> 3) Add DL_FLAG_STATELESS flag when calling device_link_add and explain the
> reason in the commit message[3/14].
> 4) Add a display patch[12/14] into this series. otherwise it may affect
> display HW fastlogo even though it don't happen in mt8183.
>
> v2: https://lore.kernel.org/linux-iommu/[email protected]/
> 1) rebase on v5.2-rc1.
> 2) Move adding device_link between the consumer and smi-larb into
> iommu_add_device from Robin.
> 3) add DL_FLAG_AUTOREMOVE_CONSUMER even though the smi is built-in from Evan.
> 4) Remove the shutdown callback in iommu.
>
> v1: https://lore.kernel.org/linux-iommu/[email protected]/
>
> Yong Wu (10):
> dt-binding: mediatek: Get rid of mediatek,larb for multimedia HW
> iommu/mediatek: Add probe_defer for smi-larb
> iommu/mediatek: Add device_link between the consumer and the larb
> devices
> media: mtk-jpeg: Get rid of mtk_smi_larb_get/put
> media: mtk-mdp: Get rid of mtk_smi_larb_get/put
> drm/mediatek: Get rid of mtk_smi_larb_get/put
> media: mtk-vcodec: Get rid of mtk_smi_larb_get/put
> memory: mtk-smi: Get rid of mtk_smi_larb_get/put
> arm: dts: mediatek: Get rid of mediatek,larb for MM nodes
> arm64: dts: mediatek: Get rid of mediatek,larb for MM nodes
>
> Yongqiang Niu (1):
> drm/mediatek: Add pm runtime support for ovl and rdma
>
> .../display/mediatek/mediatek,disp.txt | 9 ----
> .../bindings/media/mediatek-jpeg-decoder.yaml | 9 ----
> .../bindings/media/mediatek-jpeg-encoder.yaml | 9 ----
> .../bindings/media/mediatek-mdp.txt | 8 ----
> .../bindings/media/mediatek-vcodec.txt | 4 --
> arch/arm/boot/dts/mt2701.dtsi | 2 -
> arch/arm/boot/dts/mt7623n.dtsi | 5 --
> arch/arm64/boot/dts/mediatek/mt8173.dtsi | 16 -------
> arch/arm64/boot/dts/mediatek/mt8183.dtsi | 6 ---
> drivers/gpu/drm/mediatek/mtk_disp_ovl.c | 9 +++-
> drivers/gpu/drm/mediatek/mtk_disp_rdma.c | 9 +++-
> drivers/gpu/drm/mediatek/mtk_drm_crtc.c | 19 ++++----
> drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c | 36 +--------------
> drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h | 1 -
> drivers/gpu/drm/mediatek/mtk_drm_drv.c | 5 +-
> drivers/iommu/mtk_iommu.c | 24 +++++++++-
> drivers/iommu/mtk_iommu_v1.c | 22 ++++++++-
> .../media/platform/mtk-jpeg/mtk_jpeg_core.c | 45 +-----------------
> .../media/platform/mtk-jpeg/mtk_jpeg_core.h | 2 -
> drivers/media/platform/mtk-mdp/mtk_mdp_comp.c | 46 +------------------
> drivers/media/platform/mtk-mdp/mtk_mdp_comp.h | 2 -
> drivers/media/platform/mtk-mdp/mtk_mdp_core.c | 1 -
> .../platform/mtk-vcodec/mtk_vcodec_dec_pm.c | 37 ++-------------
> .../platform/mtk-vcodec/mtk_vcodec_drv.h | 3 --
> .../platform/mtk-vcodec/mtk_vcodec_enc.c | 1 -
> .../platform/mtk-vcodec/mtk_vcodec_enc_pm.c | 44 ++----------------
> drivers/memory/mtk-smi.c | 14 ------
> include/soc/mediatek/smi.h | 20 --------
> 28 files changed, 85 insertions(+), 323 deletions(-)
>

2021-07-14 09:02:11

by Frank Wunderlich

[permalink] [raw]
Subject: Aw: [PATCH v6 00/11] Clean up "mediatek,larb"

Hi,

sorry this (or the 2 depency-series) cause a NULL Pointer deref in iommu_group_remove_device on mt7623/bpi-r2

i wonder why on bootup a cleanup is run, but have no hint about this.

since "dts: mtk-mdp: remove mediatek, vpu property from primary MDP device" all is good, i guess problem comes up while removing larb with DT

this is backtrace

[ 6.274465] PC is at iommu_group_remove_device+0x28/0x148
[ 6.279877] LR is at iommu_release_device+0x4c/0x70

[ 6.674347] Backtrace:
[ 6.676797] [<c0c9c37c>] (iommu_group_remove_device) from [<c06bf028>] (iomm)
[ 6.686221] r7:00000000 r6:c06bf04c r5:c0d7a1ac r4:c21fc010
[ 6.691883] [<c06befdc>] (iommu_release_device) from [<c06bf064>] (remove_io)
[ 6.700689] r5:00000000 r4:00000000
[ 6.704265] [<c06bf04c>] (remove_iommu_group) from [<c0733434>] (bus_for_eac)
[ 6.712725] [<c07333ac>] (bus_for_each_dev) from [<c06bf658>] (bus_set_iommu)
[ 6.720753] r6:c331f440 r5:c1406f58 r4:ffffffea
[ 6.725370] [<c06bf5a0>] (bus_set_iommu) from [<c06c1e88>] (mtk_iommu_probe+)
[ 6.733484] r7:c32db0b8 r6:c21f9c00 r5:c331f1c0 r4:00000000
[ 6.739145] [<c06c1bfc>] (mtk_iommu_probe) from [<c0738c14>] (platform_probe)
[ 6.747176] r10:c21f9c10 r9:c2496f54 r8:c14623b8 r7:c14623b8 r6:c1405b90 r50
[ 6.755012] r4:00000000
[ 6.757544] [<c0738ba8>] (platform_probe) from [<c0735968>] (really_probe.pa)
[ 6.766006] r7:c14623b8 r6:c1405b90 r5:00000000 r4:c21f9c10
[ 6.771667] [<c07358a0>] (really_probe.part.0) from [<c0735cec>] (really_pro)
[ 6.779866] r7:c21f9c10 r6:c2549e74 r5:c1405b90 r4:c21f9c10
[ 6.785527] [<c0735ca4>] (really_probe) from [<c0735de0>] (__driver_probe_de)
[ 6.793984] r5:c1405b90 r4:c21f9c10
[ 6.797560] [<c0735d30>] (__driver_probe_device) from [<c0735fa0>] (driver_p)
[ 6.806543] r9:c2496f54 r8:00000008 r7:c21f9c10 r6:c2549e74 r5:c14c6ec8 r4:4
[ 6.814291] [<c0735f5c>] (driver_probe_device) from [<c0736410>] (__device_a)
[ 6.823448] r9:c2496f54 r8:00000000 r7:c21f9c10 r6:c2549e74 r5:c1405b90 r4:1
[ 6.831196] [<c073635c>] (__device_attach_driver) from [<c0733540>] (bus_for)
[ 6.840007] r7:c14623b8 r6:c073635c r5:c2549e74 r4:00000000
[ 6.845669] [<c07334ac>] (bus_for_each_drv) from [<c07357e8>] (__device_atta)
[ 6.854044] r6:00000001 r5:c21f9c54 r4:c21f9c10
[ 6.858662] [<c07356e4>] (__device_attach) from [<c073662c>] (device_initial)
[ 6.867207] r6:c21f9c10 r5:c1406f58 r4:c1406ca0
[ 6.871825] [<c0736610>] (device_initial_probe) from [<c07346dc>] (bus_probe)
[ 6.880454] [<c0734648>] (bus_probe_device) from [<c0734cc8>] (deferred_prob)


bisect shows this commit as breaking:

Author: Yong Wu <[email protected]>
Date: Wed Jul 14 10:56:17 2021 +0800

iommu/mediatek: Add probe_defer for smi-larb

Prepare for adding device_link.

regards Frank

2021-07-14 11:17:14

by Yong Wu (吴勇)

[permalink] [raw]
Subject: Re: [PATCH v6 03/11] iommu/mediatek: Add device_link between the consumer and the larb devices

On Wed, 2021-07-14 at 10:26 +0200, Dafna Hirschfeld wrote:
>
> On 14.07.21 04:56, Yong Wu wrote:
> > MediaTek IOMMU-SMI diagram is like below. all the consumer connect with
> > smi-larb, then connect with smi-common.
> >
> > M4U
> > |
> > smi-common
> > |
> > -------------
> > | | ...
> > | |
> > larb1 larb2
> > | |
> > vdec venc
> >
> > When the consumer works, it should enable the smi-larb's power which
> > also need enable the smi-common's power firstly.
> >
> > Thus, First of all, use the device link connect the consumer and the
> > smi-larbs. then add device link between the smi-larb and smi-common.
> >
> > This patch adds device_link between the consumer and the larbs.
> >
> > When device_link_add, I add the flag DL_FLAG_STATELESS to avoid calling
> > pm_runtime_xx to keep the original status of clocks. It can avoid two
> > issues:
> > 1) Display HW show fastlogo abnormally reported in [1]. At the beggining,
> > all the clocks are enabled before entering kernel, but the clocks for
> > display HW(always in larb0) will be gated after clk_enable and clk_disable
> > called from device_link_add(->pm_runtime_resume) and rpm_idle. The clock
> > operation happened before display driver probe. At that time, the display
> > HW will be abnormal.
> >
> > 2) A deadlock issue reported in [2]. Use DL_FLAG_STATELESS to skip
> > pm_runtime_xx to avoid the deadlock.
> >
> > Corresponding, DL_FLAG_AUTOREMOVE_CONSUMER can't be added, then
> > device_link_removed should be added explicitly.
> >
> > [1] https://lore.kernel.org/linux-mediatek/1564213888.22908.4.camel@mhfsdcap03/
> > [2] https://lore.kernel.org/patchwork/patch/1086569/
> >
> > Suggested-by: Tomasz Figa <[email protected]>
> > Signed-off-by: Yong Wu <[email protected]>
> > ---
> > drivers/iommu/mtk_iommu.c | 22 ++++++++++++++++++++++
> > drivers/iommu/mtk_iommu_v1.c | 20 +++++++++++++++++++-
> > 2 files changed, 41 insertions(+), 1 deletion(-)
> >
> > diff --git a/drivers/iommu/mtk_iommu.c b/drivers/iommu/mtk_iommu.c
> > index a02dde094788..ee742900cf4b 100644
> > --- a/drivers/iommu/mtk_iommu.c
> > +++ b/drivers/iommu/mtk_iommu.c
> > @@ -571,22 +571,44 @@ static struct iommu_device *mtk_iommu_probe_device(struct device *dev)
> > {
> > struct iommu_fwspec *fwspec = dev_iommu_fwspec_get(dev);
> > struct mtk_iommu_data *data;
> > + struct device_link *link;
> > + struct device *larbdev;
> > + unsigned int larbid;
> >
> > if (!fwspec || fwspec->ops != &mtk_iommu_ops)
> > return ERR_PTR(-ENODEV); /* Not a iommu client device */
> >
> > data = dev_iommu_priv_get(dev);
> >
> > + /*
> > + * Link the consumer device with the smi-larb device(supplier)
> > + * The device in each a larb is a independent HW. thus only link
> > + * one larb here.
> > + */
> > + larbid = MTK_M4U_TO_LARB(fwspec->ids[0]);
> > + larbdev = data->larb_imu[larbid].dev;
> > + link = device_link_add(dev, larbdev,
> > + DL_FLAG_PM_RUNTIME | DL_FLAG_STATELESS);
> > + if (!link)
> > + dev_err(dev, "Unable to link %s\n", dev_name(larbdev));
> shoudn't ERR_PTR be returned in case of failure?

In the previous design, this is not a fatal error. the consumer device
could probe continuously even though it fail here..Returning here may
let the issue be caught earlier, I will add this in next version.

if (!link) {
...
return ERR_PTR(EINVAL);
}

>
> Thanks,
> Dafna
>
> > return &data->iommu;
> > }
> >
> > static void mtk_iommu_release_device(struct device *dev)
> > {
> > struct iommu_fwspec *fwspec = dev_iommu_fwspec_get(dev);
> > + struct mtk_iommu_data *data;
> > + struct device *larbdev;
> > + unsigned int larbid;
> >
> > if (!fwspec || fwspec->ops != &mtk_iommu_ops)
> > return;
> >
> > + data = dev_iommu_priv_get(dev);
> > + larbid = MTK_M4U_TO_LARB(fwspec->ids[0]);
> > + larbdev = data->larb_imu[larbid].dev;
> > + device_link_remove(dev, larbdev);
> > +
> > iommu_fwspec_free(dev);
> > }
> >
> > diff --git a/drivers/iommu/mtk_iommu_v1.c b/drivers/iommu/mtk_iommu_v1.c
> > index d9365a3d8dc9..d2a7c66b8239 100644
> > --- a/drivers/iommu/mtk_iommu_v1.c
> > +++ b/drivers/iommu/mtk_iommu_v1.c
> > @@ -424,7 +424,9 @@ static struct iommu_device *mtk_iommu_probe_device(struct device *dev)
> > struct iommu_fwspec *fwspec = dev_iommu_fwspec_get(dev);
> > struct of_phandle_args iommu_spec;
> > struct mtk_iommu_data *data;
> > - int err, idx = 0;
> > + int err, idx = 0, larbid;
> > + struct device_link *link;
> > + struct device *larbdev;
> >
> > while (!of_parse_phandle_with_args(dev->of_node, "iommus",
> > "#iommu-cells",
> > @@ -445,6 +447,14 @@ static struct iommu_device *mtk_iommu_probe_device(struct device *dev)
> >
> > data = dev_iommu_priv_get(dev);
> >
> > + /* Link the consumer device with the smi-larb device(supplier) */
> > + larbid = mt2701_m4u_to_larb(fwspec->ids[0]);
> > + larbdev = data->larb_imu[larbid].dev;
> > + link = device_link_add(dev, larbdev,
> > + DL_FLAG_PM_RUNTIME | DL_FLAG_STATELESS);
> > + if (!link)
> > + dev_err(dev, "Unable to link %s\n", dev_name(larbdev));
> > +
> > return &data->iommu;
> > }
> >
> > @@ -465,10 +475,18 @@ static void mtk_iommu_probe_finalize(struct device *dev)
> > static void mtk_iommu_release_device(struct device *dev)
> > {
> > struct iommu_fwspec *fwspec = dev_iommu_fwspec_get(dev);
> > + struct mtk_iommu_data *data;
> > + struct device *larbdev;
> > + unsigned int larbid;
> >
> > if (!fwspec || fwspec->ops != &mtk_iommu_ops)
> > return;
> >
> > + data = dev_iommu_priv_get(dev);
> > + larbid = mt2701_m4u_to_larb(fwspec->ids[0]);
> > + larbdev = data->larb_imu[larbid].dev;
> > + device_link_remove(dev, larbdev);
> > +
> > iommu_fwspec_free(dev);
> > }
> >
> >

2021-07-14 11:18:43

by Yong Wu (吴勇)

[permalink] [raw]
Subject: Re: [PATCH v6 06/11] drm/mediatek: Add pm runtime support for ovl and rdma

On Wed, 2021-07-14 at 10:44 +0200, Dafna Hirschfeld wrote:
>
> On 14.07.21 04:56, Yong Wu wrote:
> > From: Yongqiang Niu <[email protected]>
> >
> > Prepare for smi cleaning up "mediatek,larb".
> >
> > Display use the dispsys device to call pm_rumtime_get_sync before.
> > This patch add pm_runtime_xx with ovl and rdma device whose nodes has
> > "iommus" property, then display could help pm_runtime_get for smi via
> > ovl or rdma device.
> >
> > CC: CK Hu <[email protected]>
> > Signed-off-by: Yongqiang Niu <[email protected]>
> > Signed-off-by: Yong Wu <[email protected]>
> > (Yong: Use pm_runtime_resume_and_get instead of pm_runtime_get_sync)
> > Acked-by: Chun-Kuang Hu <[email protected]>
> > ---
> > drivers/gpu/drm/mediatek/mtk_disp_ovl.c | 9 ++++++++-
> > drivers/gpu/drm/mediatek/mtk_disp_rdma.c | 9 ++++++++-
> > drivers/gpu/drm/mediatek/mtk_drm_crtc.c | 12 +++++++++++-
> > 3 files changed, 27 insertions(+), 3 deletions(-)
> >
> > diff --git a/drivers/gpu/drm/mediatek/mtk_disp_ovl.c b/drivers/gpu/drm/mediatek/mtk_disp_ovl.c
> > index fa9d79963cd3..ea5760f856ec 100644
> > --- a/drivers/gpu/drm/mediatek/mtk_disp_ovl.c
> > +++ b/drivers/gpu/drm/mediatek/mtk_disp_ovl.c
> > @@ -11,6 +11,7 @@
> > #include <linux/of_device.h>
> > #include <linux/of_irq.h>
> > #include <linux/platform_device.h>
> > +#include <linux/pm_runtime.h>
> > #include <linux/soc/mediatek/mtk-cmdq.h>
> >
> > #include "mtk_disp_drv.h"
> > @@ -414,15 +415,21 @@ static int mtk_disp_ovl_probe(struct platform_device *pdev)
> > return ret;
> > }
> >
> > + pm_runtime_enable(dev);
> > +
> > ret = component_add(dev, &mtk_disp_ovl_component_ops);
> > - if (ret)
> > + if (ret) {
> > + pm_runtime_disable(dev);
> > dev_err(dev, "Failed to add component: %d\n", ret);
> > + }
> >
> > return ret;
> > }
> >
> > static int mtk_disp_ovl_remove(struct platform_device *pdev)
> > {
> > + pm_runtime_disable(&pdev->dev);
> > +
> > return 0;
> > }
> >
> > diff --git a/drivers/gpu/drm/mediatek/mtk_disp_rdma.c b/drivers/gpu/drm/mediatek/mtk_disp_rdma.c
> > index 705f28ceb4dd..0f31d1c8e37c 100644
> > --- a/drivers/gpu/drm/mediatek/mtk_disp_rdma.c
> > +++ b/drivers/gpu/drm/mediatek/mtk_disp_rdma.c
> > @@ -9,6 +9,7 @@
> > #include <linux/of_device.h>
> > #include <linux/of_irq.h>
> > #include <linux/platform_device.h>
> > +#include <linux/pm_runtime.h>
> > #include <linux/soc/mediatek/mtk-cmdq.h>
> >
> > #include "mtk_disp_drv.h"
> > @@ -327,9 +328,13 @@ static int mtk_disp_rdma_probe(struct platform_device *pdev)
> >
> > platform_set_drvdata(pdev, priv);
> >
> > + pm_runtime_enable(dev);
> > +
> > ret = component_add(dev, &mtk_disp_rdma_component_ops);
> > - if (ret)
> > + if (ret) {
> > + pm_runtime_disable(dev);
> > dev_err(dev, "Failed to add component: %d\n", ret);
> > + }
> >
> > return ret;
> > }
> > @@ -338,6 +343,8 @@ static int mtk_disp_rdma_remove(struct platform_device *pdev)
> > {
> > component_del(&pdev->dev, &mtk_disp_rdma_component_ops);
> >
> > + pm_runtime_disable(&pdev->dev);
> > +
> > return 0;
> > }
> >
> > diff --git a/drivers/gpu/drm/mediatek/mtk_drm_crtc.c b/drivers/gpu/drm/mediatek/mtk_drm_crtc.c
> > index 474efb844249..08e3f352377d 100644
> > --- a/drivers/gpu/drm/mediatek/mtk_drm_crtc.c
> > +++ b/drivers/gpu/drm/mediatek/mtk_drm_crtc.c
> > @@ -557,9 +557,15 @@ static void mtk_drm_crtc_atomic_enable(struct drm_crtc *crtc,
> > return;
> > }
> >
> > + ret = pm_runtime_resume_and_get(comp->dev);
> > + if (ret < 0)
> > + DRM_DEV_ERROR(comp->dev, "Failed to enable power domain: %d\n",
> > + ret);
>
> shouldn't the code return in case of failure here?

After confirm with yongqiang, We will fix this in next version.

Thanks.

>
> Thanks,
> Dafna
>
> > +
> > ret = mtk_crtc_ddp_hw_init(mtk_crtc);
> > if (ret) {
> > mtk_smi_larb_put(comp->larb_dev);
> > + pm_runtime_put(comp->dev);
> > return;
> > }
> >
> > @@ -572,7 +578,7 @@ static void mtk_drm_crtc_atomic_disable(struct drm_crtc *crtc,
> > {
> > struct mtk_drm_crtc *mtk_crtc = to_mtk_crtc(crtc);
> > struct mtk_ddp_comp *comp = mtk_crtc->ddp_comp[0];
> > - int i;
> > + int i, ret;
> >
> > DRM_DEBUG_DRIVER("%s %d\n", __func__, crtc->base.id);
> > if (!mtk_crtc->enabled)
> > @@ -596,6 +602,10 @@ static void mtk_drm_crtc_atomic_disable(struct drm_crtc *crtc,
> > drm_crtc_vblank_off(crtc);
> > mtk_crtc_ddp_hw_fini(mtk_crtc);
> > mtk_smi_larb_put(comp->larb_dev);
> > + ret = pm_runtime_put(comp->dev);
> > + if (ret < 0)
> > + DRM_DEV_ERROR(comp->dev, "Failed to disable power domain: %d\n",
> > + ret);
> >
> > mtk_crtc->enabled = false;
> > }
> >
>
> _______________________________________________
> Linux-mediatek mailing list
> [email protected]
> http://lists.infradead.org/mailman/listinfo/linux-mediatek

2021-07-14 11:19:10

by Yong Wu (吴勇)

[permalink] [raw]
Subject: Re: [PATCH v6 00/11] Clean up "mediatek,larb"

On Wed, 2021-07-14 at 10:56 +0200, Dafna Hirschfeld wrote:
> Hi
>
> Thanks for the patchset.
>
> I tested it on mt8173 (elm) with chromeos userspace.
> Before that patchset, the test:
>
> tast -verbose run -build=false 10.42.0.175 video.DecodeAccel.h264
>
> sometimes passed and sometimes failed with 'context deadline exceeded'.
> With this patchset it seems that the test always passes so I added tested-by:
>
> Tested-by: Dafna Hirschfeld <[email protected]>

Thanks very much for your quick review and testing:)

>
> Thanks,
> Dafna
>
>
>
>
> On 14.07.21 04:56, Yong Wu wrote:
> > MediaTek IOMMU block diagram always like below:
> >
> > M4U
> > |
> > smi-common
> > |
> > -------------
> > | | ...
> > | |
> > larb1 larb2
> > | |
> > vdec venc
> >
> > All the consumer connect with smi-larb, then connect with smi-common.
> >
> > When the consumer works, it should enable the smi-larb's power which also
> > need enable the smi-common's power firstly.
> >
> > Thus, Firstly, use the device link connect the consumer and the
> > smi-larbs. then add device link between the smi-larb and smi-common.
> >
> > After adding the device_link, then "mediatek,larb" property can be removed.
> > the iommu consumer don't need call the mtk_smi_larb_get/put to enable
> > the power and clock of smi-larb and smi-common.
> >
> > About the MM dt-binding/dtsi patches, I guess they should go together, thus
> > I don't split them for each a MM module and each a SoC.
> >
> > Base on v5.14-rc1, and a jpeg[1] and mdp[2] patchset.
> >
> > [1] https://lore.kernel.org/linux-mediatek/[email protected]/
> > [2] https://lore.kernel.org/linux-mediatek/[email protected]/
> >
> > Change notes:
> > v6: 1) rebase on v5.14-rc1.
> > 2) Fix the issue commented in v5 from Dafna and Hsin-Yi.
> > 3) Remove the patches about using pm_runtime_resume_and_get since they have
> > already been merged by other patches.
> >
> > v5: https://lore.kernel.org/linux-mediatek/[email protected]/
> > 1) Base v5.12-rc2.
> > 2) Remove changing the mtk-iommu to module_platform_driver patch, It have already been a
> > independent patch.
> >
> > v4: https://lore.kernel.org/linux-mediatek/[email protected]/
> > base on v5.7-rc1.
> > 1) Move drm PM patch before smi patchs.
> > 2) Change builtin_platform_driver to module_platform_driver since we may need
> > build as module.
> > 3) Rebase many patchset as above.
> >
> > v3: https://lore.kernel.org/linux-iommu/[email protected]/
> > 1) rebase on v5.3-rc1 and the latest mt8183 patchset.
> > 2) Use device_is_bound to check whether the driver is ready from Matthias.
> > 3) Add DL_FLAG_STATELESS flag when calling device_link_add and explain the
> > reason in the commit message[3/14].
> > 4) Add a display patch[12/14] into this series. otherwise it may affect
> > display HW fastlogo even though it don't happen in mt8183.
> >
> > v2: https://lore.kernel.org/linux-iommu/[email protected]/
> > 1) rebase on v5.2-rc1.
> > 2) Move adding device_link between the consumer and smi-larb into
> > iommu_add_device from Robin.
> > 3) add DL_FLAG_AUTOREMOVE_CONSUMER even though the smi is built-in from Evan.
> > 4) Remove the shutdown callback in iommu.
> >
> > v1: https://lore.kernel.org/linux-iommu/[email protected]/
> >
> > Yong Wu (10):
> > dt-binding: mediatek: Get rid of mediatek,larb for multimedia HW
> > iommu/mediatek: Add probe_defer for smi-larb
> > iommu/mediatek: Add device_link between the consumer and the larb
> > devices
> > media: mtk-jpeg: Get rid of mtk_smi_larb_get/put
> > media: mtk-mdp: Get rid of mtk_smi_larb_get/put
> > drm/mediatek: Get rid of mtk_smi_larb_get/put
> > media: mtk-vcodec: Get rid of mtk_smi_larb_get/put
> > memory: mtk-smi: Get rid of mtk_smi_larb_get/put
> > arm: dts: mediatek: Get rid of mediatek,larb for MM nodes
> > arm64: dts: mediatek: Get rid of mediatek,larb for MM nodes
> >
> > Yongqiang Niu (1):
> > drm/mediatek: Add pm runtime support for ovl and rdma
> >
> > .../display/mediatek/mediatek,disp.txt | 9 ----
> > .../bindings/media/mediatek-jpeg-decoder.yaml | 9 ----
> > .../bindings/media/mediatek-jpeg-encoder.yaml | 9 ----
> > .../bindings/media/mediatek-mdp.txt | 8 ----
> > .../bindings/media/mediatek-vcodec.txt | 4 --
> > arch/arm/boot/dts/mt2701.dtsi | 2 -
> > arch/arm/boot/dts/mt7623n.dtsi | 5 --
> > arch/arm64/boot/dts/mediatek/mt8173.dtsi | 16 -------
> > arch/arm64/boot/dts/mediatek/mt8183.dtsi | 6 ---
> > drivers/gpu/drm/mediatek/mtk_disp_ovl.c | 9 +++-
> > drivers/gpu/drm/mediatek/mtk_disp_rdma.c | 9 +++-
> > drivers/gpu/drm/mediatek/mtk_drm_crtc.c | 19 ++++----
> > drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c | 36 +--------------
> > drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h | 1 -
> > drivers/gpu/drm/mediatek/mtk_drm_drv.c | 5 +-
> > drivers/iommu/mtk_iommu.c | 24 +++++++++-
> > drivers/iommu/mtk_iommu_v1.c | 22 ++++++++-
> > .../media/platform/mtk-jpeg/mtk_jpeg_core.c | 45 +-----------------
> > .../media/platform/mtk-jpeg/mtk_jpeg_core.h | 2 -
> > drivers/media/platform/mtk-mdp/mtk_mdp_comp.c | 46 +------------------
> > drivers/media/platform/mtk-mdp/mtk_mdp_comp.h | 2 -
> > drivers/media/platform/mtk-mdp/mtk_mdp_core.c | 1 -
> > .../platform/mtk-vcodec/mtk_vcodec_dec_pm.c | 37 ++-------------
> > .../platform/mtk-vcodec/mtk_vcodec_drv.h | 3 --
> > .../platform/mtk-vcodec/mtk_vcodec_enc.c | 1 -
> > .../platform/mtk-vcodec/mtk_vcodec_enc_pm.c | 44 ++----------------
> > drivers/memory/mtk-smi.c | 14 ------
> > include/soc/mediatek/smi.h | 20 --------
> > 28 files changed, 85 insertions(+), 323 deletions(-)
> >

2021-07-14 11:19:54

by Yong Wu (吴勇)

[permalink] [raw]
Subject: Re: Aw: [PATCH v6 00/11] Clean up "mediatek,larb"

On Wed, 2021-07-14 at 10:59 +0200, Frank Wunderlich wrote:
> Hi,
>
> sorry this (or the 2 depency-series) cause a NULL Pointer deref in iommu_group_remove_device on mt7623/bpi-r2

Hi Frank,

Thanks for your report. mt7623 use mtk_iommu_v1.c.

I will try to reproduce this locally.

>
> i wonder why on bootup a cleanup is run, but have no hint about this.
>
> since "dts: mtk-mdp: remove mediatek, vpu property from primary MDP device" all is good, i guess problem comes up while removing larb with DT
>
> this is backtrace
>
> [ 6.274465] PC is at iommu_group_remove_device+0x28/0x148
> [ 6.279877] LR is at iommu_release_device+0x4c/0x70
>
> [ 6.674347] Backtrace:
> [ 6.676797] [<c0c9c37c>] (iommu_group_remove_device) from [<c06bf028>] (iomm)
> [ 6.686221] r7:00000000 r6:c06bf04c r5:c0d7a1ac r4:c21fc010
> [ 6.691883] [<c06befdc>] (iommu_release_device) from [<c06bf064>] (remove_io)
> [ 6.700689] r5:00000000 r4:00000000
> [ 6.704265] [<c06bf04c>] (remove_iommu_group) from [<c0733434>] (bus_for_eac)
> [ 6.712725] [<c07333ac>] (bus_for_each_dev) from [<c06bf658>] (bus_set_iommu)
> [ 6.720753] r6:c331f440 r5:c1406f58 r4:ffffffea
> [ 6.725370] [<c06bf5a0>] (bus_set_iommu) from [<c06c1e88>] (mtk_iommu_probe+)
> [ 6.733484] r7:c32db0b8 r6:c21f9c00 r5:c331f1c0 r4:00000000
> [ 6.739145] [<c06c1bfc>] (mtk_iommu_probe) from [<c0738c14>] (platform_probe)
> [ 6.747176] r10:c21f9c10 r9:c2496f54 r8:c14623b8 r7:c14623b8 r6:c1405b90 r50
> [ 6.755012] r4:00000000
> [ 6.757544] [<c0738ba8>] (platform_probe) from [<c0735968>] (really_probe.pa)
> [ 6.766006] r7:c14623b8 r6:c1405b90 r5:00000000 r4:c21f9c10
> [ 6.771667] [<c07358a0>] (really_probe.part.0) from [<c0735cec>] (really_pro)
> [ 6.779866] r7:c21f9c10 r6:c2549e74 r5:c1405b90 r4:c21f9c10
> [ 6.785527] [<c0735ca4>] (really_probe) from [<c0735de0>] (__driver_probe_de)
> [ 6.793984] r5:c1405b90 r4:c21f9c10
> [ 6.797560] [<c0735d30>] (__driver_probe_device) from [<c0735fa0>] (driver_p)
> [ 6.806543] r9:c2496f54 r8:00000008 r7:c21f9c10 r6:c2549e74 r5:c14c6ec8 r4:4
> [ 6.814291] [<c0735f5c>] (driver_probe_device) from [<c0736410>] (__device_a)
> [ 6.823448] r9:c2496f54 r8:00000000 r7:c21f9c10 r6:c2549e74 r5:c1405b90 r4:1
> [ 6.831196] [<c073635c>] (__device_attach_driver) from [<c0733540>] (bus_for)
> [ 6.840007] r7:c14623b8 r6:c073635c r5:c2549e74 r4:00000000
> [ 6.845669] [<c07334ac>] (bus_for_each_drv) from [<c07357e8>] (__device_atta)
> [ 6.854044] r6:00000001 r5:c21f9c54 r4:c21f9c10
> [ 6.858662] [<c07356e4>] (__device_attach) from [<c073662c>] (device_initial)
> [ 6.867207] r6:c21f9c10 r5:c1406f58 r4:c1406ca0
> [ 6.871825] [<c0736610>] (device_initial_probe) from [<c07346dc>] (bus_probe)
> [ 6.880454] [<c0734648>] (bus_probe_device) from [<c0734cc8>] (deferred_prob)
>
>
> bisect shows this commit as breaking:
>
> Author: Yong Wu <[email protected]>
> Date: Wed Jul 14 10:56:17 2021 +0800
>
> iommu/mediatek: Add probe_defer for smi-larb
>
> Prepare for adding device_link.
>
> regards Frank

2021-07-14 11:25:01

by Frank Wunderlich

[permalink] [raw]
Subject: Aw: Re: [PATCH v6 00/11] Clean up "mediatek,larb"

> Gesendet: Mittwoch, 14. Juli 2021 um 13:18 Uhr
> Von: "Yong Wu" <[email protected]>
> Hi Frank,
>
> Thanks for your report. mt7623 use mtk_iommu_v1.c.
>
> I will try to reproduce this locally.

Hi,

as far as i have debugged it dev->iommu_group is NULL, so it crashes on first access (dev_info)

drivers/iommu/iommu.c:

923 void iommu_group_remove_device(struct device *dev)
924 {
925 printk(KERN_ALERT "DEBUG: Passed %s %d \n",__FUNCTION__,__LINE__);
926 struct iommu_group *group = dev->iommu_group;
927 struct group_device *tmp_device, *device = NULL;
928
929 printk(KERN_ALERT "DEBUG: Passed %s %d 0x%08x\n",__FUNCTION__,__LINE__,(unsigned int)group);
930 dev_info(dev, "Removing from iommu group %d\n", group->id);


regards Frank