2020-09-23 15:59:54

by Vignesh Raghavendra

Subject: [PATCH v2 0/2] J7200: Add I2C support

Add I2C and I2C IO expanders nodes for J7200

v2:
Align reg address format with that of file's (s/0x0/0x00)

Vignesh Raghavendra (2):
arm64: dts: ti: j7200: Add I2C nodes
arm64: dts: ti: k3-j7200-common-proc-board: Add I2C IO expanders

.../dts/ti/k3-j7200-common-proc-board.dts | 49 ++++++++++++
arch/arm64/boot/dts/ti/k3-j7200-main.dtsi | 77 +++++++++++++++++++
.../boot/dts/ti/k3-j7200-mcu-wakeup.dtsi | 33 ++++++++
3 files changed, 159 insertions(+)

--
2.28.0

2020-09-24 09:25:06

by Faiz Abbas

Subject: Re: [PATCH v2 0/2] J7200: Add I2C support

Hi,

On 23/09/20 9:23 pm, Vignesh Raghavendra wrote:
> Add I2C and I2C IO expanders nodes for J7200
>
> v2:
> Align reg address format with that of file's (s/0x0/0x00)
>
> Vignesh Raghavendra (2):
> arm64: dts: ti: j7200: Add I2C nodes
> arm64: dts: ti: k3-j7200-common-proc-board: Add I2C IO expanders
>
> .../dts/ti/k3-j7200-common-proc-board.dts | 49 ++++++++++++
> arch/arm64/boot/dts/ti/k3-j7200-main.dtsi | 77 +++++++++++++++++++
> .../boot/dts/ti/k3-j7200-mcu-wakeup.dtsi | 33 ++++++++
> 3 files changed, 159 insertions(+)
>

Reviewed-by: Faiz Abbas <[email protected]>

Thanks,
Faiz

2020-09-24 09:33:08

by Sekhar Nori

Subject: Re: [PATCH v2 0/2] J7200: Add I2C support

On 23/09/20 9:23 PM, Vignesh Raghavendra wrote:
> Add I2C and I2C IO expanders nodes for J7200
>
> v2:
> Align reg address format with that of file's (s/0x0/0x00)

Reviewed-by: Sekhar Nori <[email protected]>

2020-09-24 11:15:28

by Nishanth Menon

Subject: Re: [PATCH v2 0/2] J7200: Add I2C support

On Wed, 23 Sep 2020 21:23:58 +0530, Vignesh Raghavendra wrote:
> Add I2C and I2C IO expanders nodes for J7200
>
> v2:
> Align reg address format with that of file's (s/0x0/0x00)
>
> Vignesh Raghavendra (2):
> arm64: dts: ti: j7200: Add I2C nodes
> arm64: dts: ti: k3-j7200-common-proc-board: Add I2C IO expanders
>
> [...]

Hi Vignesh Raghavendra,

I have applied the following to branch ti-k3-dts-next on [1].
Thank you!

[1/2] arm64: dts: ti: j7200: Add I2C nodes
commit: afc0406bd8a797d8d5066e935eb7c098cf9449de
[2/2] arm64: dts: ti: k3-j7200-common-proc-board: Add I2C IO expanders
commit: ef0b69464cc5182b35e8b4a7b0652f5ccef9c70a


All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent up the chain during
the next merge window (or sooner if it is a relevant bug fix), however if
problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

[1] git://git.kernel.org/pub/scm/linux/kernel/git/nmenon/linux.git
--
Regards,
Nishanth Menon
Key (0xDDB5849D1736249D) / Fingerprint: F8A2 8693 54EB 8232 17A3 1A34 DDB5 849D 1736 249D