vimc uses Component API to split the driver into functional components.
The real hardware resembles a monolith structure than component and
component structure added a level of complexity making it hard to
maintain without adding any real benefit.
The sensor is one vimc component that would makes sense to be a separate
module to closely align with the real hardware. It would be easier to
collapse vimc into single monolithic driver first and then split the
sensor off as a separate module.
This patch series removes the component API and makes minimal changes to
the code base preserving the functional division of the code structure.
Preserving the functional structure allows us to split the sensor off
as a separate module in the future.
Major design elements in this change are:
- Use existing struct vimc_ent_config and struct vimc_pipeline_config
to drive the initialization of the functional components.
- Make vimc_device and vimc_ent_config global by moving them to
vimc-common.h
- Add two new hooks add and rm to initialize and register, unregister
and free subdevs.
- All component API is now gone and bind and unbind hooks are modified
to do "add" and "rm" with minimal changes to just add and rm subdevs.
- vimc-core's bind and unbind are now register and unregister.
- vimc-core invokes "add" hooks from its vimc_register_devices().
The "add" hooks remain the same and register subdevs. They don't
create platform devices of their own and use vimc's pdev.dev as
their reference device. The "add" hooks save their vimc_ent_device(s)
in the corresponding vimc_ent_config.
- vimc-core invokes "rm" hooks from its unregister to unregister
subdevs and cleanup.
- vimc-core invokes "add" and "rm" hooks with pointer to struct
vimc_device and the corresponding struct vimc_ent_config pointer.
The following configure and stream test works on all devices.
media-ctl -d platform:vimc -V '"Sensor A":0[fmt:SBGGR8_1X8/640x480]'
media-ctl -d platform:vimc -V '"Debayer A":0[fmt:SBGGR8_1X8/640x480]'
media-ctl -d platform:vimc -V '"Sensor B":0[fmt:SBGGR8_1X8/640x480]'
media-ctl -d platform:vimc -V '"Debayer B":0[fmt:SBGGR8_1X8/640x480]'
v4l2-ctl -z platform:vimc -d "RGB/YUV Capture" -v width=1920,height=1440
v4l2-ctl -z platform:vimc -d "Raw Capture 0" -v pixelformat=BA81
v4l2-ctl -z platform:vimc -d "Raw Capture 1" -v pixelformat=BA81
v4l2-ctl --stream-mmap --stream-count=100 -d /dev/video1
v4l2-ctl --stream-mmap --stream-count=100 -d /dev/video2
v4l2-ctl --stream-mmap --stream-count=100 -d /dev/video3
The second patch in the series fixes a general protection fault found
when rmmod is done while stream is active.
- rmmod while streaming returns vimc is in use
- rmmod without active stream works correctly
Changes since v1:
Patch 1 & 2: (patch 1 in this series)
- Collapsed the two patches into one
- Added common defines (vimc_device and vimc_ent_config) to vimc-common.h
based on our discussion.
- Addressed review comments from Helen and Laurent
- Use vimc-common.h instead of creating a new file.
- Other minor comments from Helen on int vs. unsigned int and
not needing to initialize ret in vimc_add_subdevs()
Patch 3 (patch 2 in this series):
- The second patch is the fix for gpf. Updated the patch after looking
at the test results from Andre and Helen. This problem is in a common
code and impacts all subdevs. The fix addresses the core problem and
fixes it. Fix removes pads release from v4l2_device_unregister_subdev()
and pads are now released from the sd release handler with all other
resources.
Outstanding:
- Update documentation with the correct topology.
- There is one outstanding gpf remaining in the unbind path. I will
fix that in a separate patch. This is an existing problem and will
be easier to fix on top of this patch series.
vimc_print_dot (--print-dot) topology after this change: (no change
compared to media master)
digraph board {
rankdir=TB
n00000001 [label="{{} | Sensor A\n/dev/v4l-subdev0 | {<port0> 0}}", shape=Mrecord, style=filled, fillcolor=green]
n00000001:port0 -> n00000005:port0 [style=bold]
n00000001:port0 -> n0000000b [style=bold]
n00000003 [label="{{} | Sensor B\n/dev/v4l-subdev1 | {<port0> 0}}", shape=Mrecord, style=filled, fillcolor=green]
n00000003:port0 -> n00000008:port0 [style=bold]
n00000003:port0 -> n0000000f [style=bold]
n00000005 [label="{{<port0> 0} | Debayer A\n/dev/v4l-subdev2 | {<port1> 1}}", shape=Mrecord, style=filled, fillcolor=green]
n00000005:port1 -> n00000015:port0
n00000008 [label="{{<port0> 0} | Debayer B\n/dev/v4l-subdev3 | {<port1> 1}}", shape=Mrecord, style=filled, fillcolor=green]
n00000008:port1 -> n00000015:port0 [style=dashed]
n0000000b [label="Raw Capture 0\n/dev/video1", shape=box, style=filled, fillcolor=yellow]
n0000000f [label="Raw Capture 1\n/dev/video2", shape=box, style=filled, fillcolor=yellow]
n00000013 [label="{{} | RGB/YUV Input\n/dev/v4l-subdev4 | {<port0> 0}}", shape=Mrecord, style=filled, fillcolor=green]
n00000013:port0 -> n00000015:port0 [style=dashed]
n00000015 [label="{{<port0> 0} | Scaler\n/dev/v4l-subdev5 | {<port1> 1}}", shape=Mrecord, style=filled, fillcolor=green]
n00000015:port1 -> n00000018 [style=bold]
n00000018 [label="RGB/YUV Capture\n/dev/video3", shape=box, style=filled, fillcolor=yellow]
Shuah Khan (2):
media: vimc: Collapse component structure into a single monolithic
driver
media: vimc: Fix gpf in rmmod path when stream is active
drivers/media/platform/vimc/Makefile | 7 +-
drivers/media/platform/vimc/vimc-capture.c | 75 ++-------
drivers/media/platform/vimc/vimc-common.c | 3 +-
drivers/media/platform/vimc/vimc-common.h | 54 ++++++
drivers/media/platform/vimc/vimc-core.c | 182 +++++++--------------
drivers/media/platform/vimc/vimc-debayer.c | 69 ++------
drivers/media/platform/vimc/vimc-scaler.c | 69 ++------
drivers/media/platform/vimc/vimc-sensor.c | 70 ++------
8 files changed, 161 insertions(+), 368 deletions(-)
--
2.17.1
If vimc module is removed while streaming is in progress, sensor subdev
unregister runs into general protection fault when it tries to unregister
media entities. This is a common subdev problem related to releasing
pads from v4l2_device_unregister_subdev() before calling unregister.
Unregister references pads during unregistering subdev.
The sd release handler is the right place for releasing all sd resources
including pads. The release handlers currently release all resources
except the pads.
Fix v4l2_device_unregister_subdev() not release pads and release pads
from the sd_int_op release handlers.
kernel: [ 4136.715839] general protection fault: 0000 [#1] SMP PTI
kernel: [ 4136.715847] CPU: 2 PID: 1972 Comm: bash Not tainted 5.3.0-rc2+ #4
kernel: [ 4136.715850] Hardware name: Dell Inc. OptiPlex 790/0HY9JP, BIOS A18 09/24/2013
kernel: [ 4136.715858] RIP: 0010:media_gobj_destroy.part.16+0x1f/0x60
kernel: [ 4136.715863] Code: ff 66 2e 0f 1f 84 00 00 00 00 00 66 66 66 66 90 55 48 89 fe 48 89 e5 53 48 89 fb 48 c7 c7 00 7f cf b0 e8 24 fa ff ff 48 8b 03 <48> 83 80 a0 00 00 00 01 48 8b 43 18 48 8b 53 10 48 89 42 08 48 89
kernel: [ 4136.715866] RSP: 0018:ffff9b2248fe3cb0 EFLAGS: 00010246
kernel: [ 4136.715870] RAX: bcf2bfbfa0d63c2f RBX: ffff88c3eb37e9c0 RCX: 00000000802a0018
kernel: [ 4136.715873] RDX: ffff88c3e4f6a078 RSI: ffff88c3eb37e9c0 RDI: ffffffffb0cf7f00
kernel: [ 4136.715876] RBP: ffff9b2248fe3cb8 R08: 0000000001000002 R09: ffffffffb0492b00
kernel: [ 4136.715879] R10: ffff9b2248fe3c28 R11: 0000000000000001 R12: 0000000000000038
kernel: [ 4136.715881] R13: ffffffffc09a1628 R14: ffff88c3e4f6a028 R15: fffffffffffffff2
kernel: [ 4136.715885] FS: 00007f8389647740(0000) GS:ffff88c465500000(0000) knlGS:0000000000000000
kernel: [ 4136.715888] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
kernel: [ 4136.715891] CR2: 000055d008f80fd8 CR3: 00000001996ec005 CR4: 00000000000606e0
kernel: [ 4136.715894] Call Trace:
kernel: [ 4136.715903] media_gobj_destroy+0x14/0x20
kernel: [ 4136.715908] __media_device_unregister_entity+0xb3/0xe0
kernel: [ 4136.715915] media_device_unregister_entity+0x30/0x40
kernel: [ 4136.715920] v4l2_device_unregister_subdev+0xa8/0xe0
kernel: [ 4136.715928] vimc_ent_sd_unregister+0x1e/0x30 [vimc]
kernel: [ 4136.715933] vimc_sen_rm+0x16/0x20 [vimc]
kernel: [ 4136.715938] vimc_remove+0x3e/0xa0 [vimc]
kernel: [ 4136.715945] platform_drv_remove+0x25/0x50
kernel: [ 4136.715951] device_release_driver_internal+0xe0/0x1b0
kernel: [ 4136.715956] device_driver_detach+0x14/0x20
kernel: [ 4136.715960] unbind_store+0xd1/0x130
kernel: [ 4136.715965] drv_attr_store+0x27/0x40
kernel: [ 4136.715971] sysfs_kf_write+0x48/0x60
kernel: [ 4136.715976] kernfs_fop_write+0x128/0x1b0
kernel: [ 4136.715982] __vfs_write+0x1b/0x40
kernel: [ 4136.715987] vfs_write+0xc3/0x1d0
kernel: [ 4136.715993] ksys_write+0xaa/0xe0
kernel: [ 4136.715999] __x64_sys_write+0x1a/0x20
kernel: [ 4136.716005] do_syscall_64+0x5a/0x130
kernel: [ 4136.716010] entry_SYSCALL_64_after_hwframe+0x4
Signed-off-by: Shuah Khan <[email protected]>
---
drivers/media/platform/vimc/vimc-common.c | 3 +--
drivers/media/platform/vimc/vimc-debayer.c | 1 +
drivers/media/platform/vimc/vimc-scaler.c | 1 +
drivers/media/platform/vimc/vimc-sensor.c | 1 +
4 files changed, 4 insertions(+), 2 deletions(-)
diff --git a/drivers/media/platform/vimc/vimc-common.c b/drivers/media/platform/vimc/vimc-common.c
index 03016f204d05..d6b1e543891b 100644
--- a/drivers/media/platform/vimc/vimc-common.c
+++ b/drivers/media/platform/vimc/vimc-common.c
@@ -324,7 +324,7 @@ int vimc_ent_sd_register(struct vimc_ent_device *ved,
{
int ret;
- /* Allocate the pads */
+ /* Allocate the pads. Should be released from the sd_int_op release */
ved->pads = vimc_pads_init(num_pads, pads_flag);
if (IS_ERR(ved->pads))
return PTR_ERR(ved->pads);
@@ -373,7 +373,6 @@ EXPORT_SYMBOL_GPL(vimc_ent_sd_register);
void vimc_ent_sd_unregister(struct vimc_ent_device *ved, struct v4l2_subdev *sd)
{
media_entity_cleanup(ved->ent);
- vimc_pads_cleanup(ved->pads);
v4l2_device_unregister_subdev(sd);
}
EXPORT_SYMBOL_GPL(vimc_ent_sd_unregister);
diff --git a/drivers/media/platform/vimc/vimc-debayer.c b/drivers/media/platform/vimc/vimc-debayer.c
index 3b4e73c10a03..8c561498020c 100644
--- a/drivers/media/platform/vimc/vimc-debayer.c
+++ b/drivers/media/platform/vimc/vimc-debayer.c
@@ -501,6 +501,7 @@ static void vimc_deb_release(struct v4l2_subdev *sd)
struct vimc_deb_device *vdeb =
container_of(sd, struct vimc_deb_device, sd);
+ vimc_pads_cleanup(vdeb->ved.pads);
kfree(vdeb);
}
diff --git a/drivers/media/platform/vimc/vimc-scaler.c b/drivers/media/platform/vimc/vimc-scaler.c
index cb5eb42de69d..9eeb1159dc78 100644
--- a/drivers/media/platform/vimc/vimc-scaler.c
+++ b/drivers/media/platform/vimc/vimc-scaler.c
@@ -332,6 +332,7 @@ static void vimc_sca_release(struct v4l2_subdev *sd)
struct vimc_sca_device *vsca =
container_of(sd, struct vimc_sca_device, sd);
+ vimc_pads_cleanup(vsca->ved.pads);
kfree(vsca);
}
diff --git a/drivers/media/platform/vimc/vimc-sensor.c b/drivers/media/platform/vimc/vimc-sensor.c
index 70b195b817a4..27c54f5dab37 100644
--- a/drivers/media/platform/vimc/vimc-sensor.c
+++ b/drivers/media/platform/vimc/vimc-sensor.c
@@ -266,6 +266,7 @@ static void vimc_sen_release(struct v4l2_subdev *sd)
v4l2_ctrl_handler_free(&vsen->hdl);
tpg_free(&vsen->tpg);
+ vimc_pads_cleanup(vsen->ved.pads);
kfree(vsen);
}
--
2.17.1
vimc uses Component API to split the driver into functional components.
The real hardware resembles a monolith structure than component and
component structure added a level of complexity making it hard to
maintain without adding any real benefit.
The sensor is one vimc component that would makes sense to be a separate
module to closely align with the real hardware. It would be easier to
collapse vimc into single monolithic driver first and then split the
sensor off as a separate module.
Collapse it into a single monolithic driver removing the Component API.
This patch removes the component API and makes minimal changes to the
code base preserving the functional division of the code structure.
Preserving the functional structure allows us to split the sensor off
as a separate module in the future.
Major design elements in this change are:
- Use existing struct vimc_ent_config and struct vimc_pipeline_config
to drive the initialization of the functional components.
- Make vimc_device and vimc_ent_config global by moving them to
vimc-common.h
- Add two new hooks add and rm to initialize and register, unregister
and free subdevs.
- All component API is now gone and bind and unbind hooks are modified
to do "add" and "rm" with minimal changes to just add and rm subdevs.
- vimc-core's bind and unbind are now register and unregister.
- vimc-core invokes "add" hooks from its vimc_register_devices().
The "add" hooks remain the same and register subdevs. They don't
create platform devices of their own and use vimc's pdev.dev as
their reference device. The "add" hooks save their vimc_ent_device(s)
in the corresponding vimc_ent_config.
- vimc-core invokes "rm" hooks from its unregister to unregister subdevs
and cleanup.
- vimc-core invokes "add" and "rm" hooks with pointer to struct vimc_device
and the corresponding struct vimc_ent_config pointer.
The following configure and stream test works on all devices.
media-ctl -d platform:vimc -V '"Sensor A":0[fmt:SBGGR8_1X8/640x480]'
media-ctl -d platform:vimc -V '"Debayer A":0[fmt:SBGGR8_1X8/640x480]'
media-ctl -d platform:vimc -V '"Sensor B":0[fmt:SBGGR8_1X8/640x480]'
media-ctl -d platform:vimc -V '"Debayer B":0[fmt:SBGGR8_1X8/640x480]'
v4l2-ctl -z platform:vimc -d "RGB/YUV Capture" -v width=1920,height=1440
v4l2-ctl -z platform:vimc -d "Raw Capture 0" -v pixelformat=BA81
v4l2-ctl -z platform:vimc -d "Raw Capture 1" -v pixelformat=BA81
v4l2-ctl --stream-mmap --stream-count=100 -d /dev/video1
v4l2-ctl --stream-mmap --stream-count=100 -d /dev/video2
v4l2-ctl --stream-mmap --stream-count=100 -d /dev/video3
Signed-off-by: Shuah Khan <[email protected]>
---
drivers/media/platform/vimc/Makefile | 7 +-
drivers/media/platform/vimc/vimc-capture.c | 75 ++-------
drivers/media/platform/vimc/vimc-common.h | 54 ++++++
drivers/media/platform/vimc/vimc-core.c | 182 +++++++--------------
drivers/media/platform/vimc/vimc-debayer.c | 68 ++------
drivers/media/platform/vimc/vimc-scaler.c | 68 ++------
drivers/media/platform/vimc/vimc-sensor.c | 69 ++------
7 files changed, 157 insertions(+), 366 deletions(-)
diff --git a/drivers/media/platform/vimc/Makefile b/drivers/media/platform/vimc/Makefile
index 96d06f030c31..a53b2b532e9f 100644
--- a/drivers/media/platform/vimc/Makefile
+++ b/drivers/media/platform/vimc/Makefile
@@ -1,5 +1,6 @@
# SPDX-License-Identifier: GPL-2.0
-vimc-y := vimc-core.o vimc-common.o vimc-streamer.o
+vimc-y := vimc-core.o vimc-common.o vimc-streamer.o vimc-capture.o \
+ vimc-debayer.o vimc-scaler.o vimc-sensor.o
+
+obj-$(CONFIG_VIDEO_VIMC) += vimc.o
-obj-$(CONFIG_VIDEO_VIMC) += vimc.o vimc-capture.o vimc-debayer.o \
- vimc-scaler.o vimc-sensor.o
diff --git a/drivers/media/platform/vimc/vimc-capture.c b/drivers/media/platform/vimc/vimc-capture.c
index 664855708fdf..0b5cd38fbeb9 100644
--- a/drivers/media/platform/vimc/vimc-capture.c
+++ b/drivers/media/platform/vimc/vimc-capture.c
@@ -5,10 +5,6 @@
* Copyright (C) 2015-2017 Helen Koike <[email protected]>
*/
-#include <linux/component.h>
-#include <linux/module.h>
-#include <linux/mod_devicetable.h>
-#include <linux/platform_device.h>
#include <media/v4l2-ioctl.h>
#include <media/videobuf2-core.h>
#include <media/videobuf2-vmalloc.h>
@@ -16,8 +12,6 @@
#include "vimc-common.h"
#include "vimc-streamer.h"
-#define VIMC_CAP_DRV_NAME "vimc-capture"
-
static const u32 vimc_cap_supported_pixfmt[] = {
V4L2_PIX_FMT_BGR24,
V4L2_PIX_FMT_RGB24,
@@ -367,11 +361,11 @@ static void vimc_cap_release(struct video_device *vdev)
kfree(vcap);
}
-static void vimc_cap_comp_unbind(struct device *comp, struct device *master,
- void *master_data)
+void vimc_cap_rm(struct vimc_device *vimc, struct vimc_ent_config *vent)
{
- struct vimc_ent_device *ved = dev_get_drvdata(comp);
- struct vimc_cap_device *vcap = container_of(ved, struct vimc_cap_device,
+ struct vimc_ent_device *ved = vent->ved;
+ struct vimc_cap_device *vcap = container_of(ved,
+ struct vimc_cap_device,
ved);
vb2_queue_release(&vcap->queue);
@@ -418,11 +412,9 @@ static void *vimc_cap_process_frame(struct vimc_ent_device *ved,
return NULL;
}
-static int vimc_cap_comp_bind(struct device *comp, struct device *master,
- void *master_data)
+int vimc_cap_add(struct vimc_device *vimc, struct vimc_ent_config *vent)
{
- struct v4l2_device *v4l2_dev = master_data;
- struct vimc_platform_data *pdata = comp->platform_data;
+ struct v4l2_device *v4l2_dev = &vimc->v4l2_dev;
struct vimc_cap_device *vcap;
struct video_device *vdev;
struct vb2_queue *q;
@@ -442,7 +434,7 @@ static int vimc_cap_comp_bind(struct device *comp, struct device *master,
}
/* Initialize the media entity */
- vcap->vdev.entity.name = pdata->entity_name;
+ vcap->vdev.entity.name = vent->name;
vcap->vdev.entity.function = MEDIA_ENT_F_IO_V4L;
ret = media_entity_pads_init(&vcap->vdev.entity,
1, vcap->ved.pads);
@@ -466,8 +458,8 @@ static int vimc_cap_comp_bind(struct device *comp, struct device *master,
ret = vb2_queue_init(q);
if (ret) {
- dev_err(comp, "%s: vb2 queue init failed (err=%d)\n",
- pdata->entity_name, ret);
+ dev_err(&vimc->pdev.dev, "%s: vb2 queue init failed (err=%d)\n",
+ vent->name, ret);
goto err_clean_m_ent;
}
@@ -484,8 +476,7 @@ static int vimc_cap_comp_bind(struct device *comp, struct device *master,
vcap->ved.ent = &vcap->vdev.entity;
vcap->ved.process_frame = vimc_cap_process_frame;
vcap->ved.vdev_get_format = vimc_cap_get_format;
- dev_set_drvdata(comp, &vcap->ved);
- vcap->dev = comp;
+ vcap->dev = &vimc->pdev.dev;
/* Initialize the video_device struct */
vdev = &vcap->vdev;
@@ -498,17 +489,18 @@ static int vimc_cap_comp_bind(struct device *comp, struct device *master,
vdev->queue = q;
vdev->v4l2_dev = v4l2_dev;
vdev->vfl_dir = VFL_DIR_RX;
- strscpy(vdev->name, pdata->entity_name, sizeof(vdev->name));
+ strscpy(vdev->name, vent->name, sizeof(vdev->name));
video_set_drvdata(vdev, &vcap->ved);
/* Register the video_device with the v4l2 and the media framework */
ret = video_register_device(vdev, VFL_TYPE_GRABBER, -1);
if (ret) {
- dev_err(comp, "%s: video register failed (err=%d)\n",
+ dev_err(&vimc->pdev.dev, "%s: video register failed (err=%d)\n",
vcap->vdev.name, ret);
goto err_release_queue;
}
+ vent->ved = &vcap->ved;
return 0;
err_release_queue:
@@ -522,44 +514,3 @@ static int vimc_cap_comp_bind(struct device *comp, struct device *master,
return ret;
}
-
-static const struct component_ops vimc_cap_comp_ops = {
- .bind = vimc_cap_comp_bind,
- .unbind = vimc_cap_comp_unbind,
-};
-
-static int vimc_cap_probe(struct platform_device *pdev)
-{
- return component_add(&pdev->dev, &vimc_cap_comp_ops);
-}
-
-static int vimc_cap_remove(struct platform_device *pdev)
-{
- component_del(&pdev->dev, &vimc_cap_comp_ops);
-
- return 0;
-}
-
-static const struct platform_device_id vimc_cap_driver_ids[] = {
- {
- .name = VIMC_CAP_DRV_NAME,
- },
- { }
-};
-
-static struct platform_driver vimc_cap_pdrv = {
- .probe = vimc_cap_probe,
- .remove = vimc_cap_remove,
- .id_table = vimc_cap_driver_ids,
- .driver = {
- .name = VIMC_CAP_DRV_NAME,
- },
-};
-
-module_platform_driver(vimc_cap_pdrv);
-
-MODULE_DEVICE_TABLE(platform, vimc_cap_driver_ids);
-
-MODULE_DESCRIPTION("Virtual Media Controller Driver (VIMC) Capture");
-MODULE_AUTHOR("Helen Mae Koike Fornazier <[email protected]>");
-MODULE_LICENSE("GPL");
diff --git a/drivers/media/platform/vimc/vimc-common.h b/drivers/media/platform/vimc/vimc-common.h
index 7b4d988b208b..cfc9143686b0 100644
--- a/drivers/media/platform/vimc/vimc-common.h
+++ b/drivers/media/platform/vimc/vimc-common.h
@@ -9,6 +9,7 @@
#define _VIMC_COMMON_H_
#include <linux/slab.h>
+#include <linux/platform_device.h>
#include <media/media-device.h>
#include <media/v4l2-device.h>
@@ -69,6 +70,28 @@ struct vimc_platform_data {
char entity_name[32];
};
+/**
+ * struct vimc_device - main device for vimc driver
+ *
+ * @pdev pointer to the platform device
+ * @pipe_cfg pointer to the vimc pipeline configuration structure
+ * @mdev the associated media_device parent
+ * @v4l2_dev Internal v4l2 parent device
+ */
+struct vimc_device {
+ /* The platform device */
+ struct platform_device pdev;
+
+ /* The pipeline configuration */
+ const struct vimc_pipeline_config *pipe_cfg;
+
+ /* The Associated media_device parent */
+ struct media_device mdev;
+
+ /* Internal v4l2 parent device */
+ struct v4l2_device v4l2_dev;
+};
+
/**
* struct vimc_ent_device - core struct that represents a node in the topology
*
@@ -97,6 +120,37 @@ struct vimc_ent_device {
struct v4l2_pix_format *fmt);
};
+/**
+ * struct vimc_ent_config Structure which describes individual
+ * configuration for each entity
+ *
+ * @name entity name
+ * @ved pointer to vimc_ent_device (a node in the topology)
+ * @add subdev add hook - initializes and registers subdev
+ * called from vimc-core
+ * @rm subdev rm hook - unregisters and frees subdev
+ * called from vimc-core
+ */
+struct vimc_ent_config {
+ const char *name;
+ struct vimc_ent_device *ved;
+ int (*add)(struct vimc_device *vimc, struct vimc_ent_config *vent);
+ void (*rm)(struct vimc_device *vimc, struct vimc_ent_config *vent);
+};
+
+/* prototypes for vimc_ent_config add and rm hooks */
+int vimc_cap_add(struct vimc_device *vimc, struct vimc_ent_config *vent);
+void vimc_cap_rm(struct vimc_device *vimc, struct vimc_ent_config *vent);
+
+int vimc_deb_add(struct vimc_device *vimc, struct vimc_ent_config *vent);
+void vimc_deb_rm(struct vimc_device *vimc, struct vimc_ent_config *vent);
+
+int vimc_sca_add(struct vimc_device *vimc, struct vimc_ent_config *vent);
+void vimc_sca_rm(struct vimc_device *vimc, struct vimc_ent_config *vent);
+
+int vimc_sen_add(struct vimc_device *vimc, struct vimc_ent_config *vent);
+void vimc_sen_rm(struct vimc_device *vimc, struct vimc_ent_config *vent);
+
/**
* vimc_mbus_code_supported - helper to check supported mbus codes
*
diff --git a/drivers/media/platform/vimc/vimc-core.c b/drivers/media/platform/vimc/vimc-core.c
index 571c55aa0e16..334f60468d06 100644
--- a/drivers/media/platform/vimc/vimc-core.c
+++ b/drivers/media/platform/vimc/vimc-core.c
@@ -5,7 +5,6 @@
* Copyright (C) 2015-2017 Helen Koike <[email protected]>
*/
-#include <linux/component.h>
#include <linux/init.h>
#include <linux/module.h>
#include <linux/platform_device.h>
@@ -24,29 +23,6 @@
.flags = link_flags, \
}
-struct vimc_device {
- /* The platform device */
- struct platform_device pdev;
-
- /* The pipeline configuration */
- const struct vimc_pipeline_config *pipe_cfg;
-
- /* The Associated media_device parent */
- struct media_device mdev;
-
- /* Internal v4l2 parent device*/
- struct v4l2_device v4l2_dev;
-
- /* Subdevices */
- struct platform_device **subdevs;
-};
-
-/* Structure which describes individual configuration for each entity */
-struct vimc_ent_config {
- const char *name;
- const char *drv;
-};
-
/* Structure which describes links between entities */
struct vimc_ent_link {
unsigned int src_ent;
@@ -58,7 +34,7 @@ struct vimc_ent_link {
/* Structure which describes the whole topology */
struct vimc_pipeline_config {
- const struct vimc_ent_config *ents;
+ struct vimc_ent_config *ents;
size_t num_ents;
const struct vimc_ent_link *links;
size_t num_links;
@@ -68,43 +44,52 @@ struct vimc_pipeline_config {
* Topology Configuration
*/
-static const struct vimc_ent_config ent_config[] = {
+static struct vimc_ent_config ent_config[] = {
{
.name = "Sensor A",
- .drv = "vimc-sensor",
+ .add = vimc_sen_add,
+ .rm = vimc_sen_rm,
},
{
.name = "Sensor B",
- .drv = "vimc-sensor",
+ .add = vimc_sen_add,
+ .rm = vimc_sen_rm,
},
{
.name = "Debayer A",
- .drv = "vimc-debayer",
+ .add = vimc_deb_add,
+ .rm = vimc_deb_rm,
},
{
.name = "Debayer B",
- .drv = "vimc-debayer",
+ .add = vimc_deb_add,
+ .rm = vimc_deb_rm,
},
{
.name = "Raw Capture 0",
- .drv = "vimc-capture",
+ .add = vimc_cap_add,
+ .rm = vimc_cap_rm,
},
{
.name = "Raw Capture 1",
- .drv = "vimc-capture",
+ .add = vimc_cap_add,
+ .rm = vimc_cap_rm,
},
{
- .name = "RGB/YUV Input",
/* TODO: change this to vimc-input when it is implemented */
- .drv = "vimc-sensor",
+ .name = "RGB/YUV Input",
+ .add = vimc_sen_add,
+ .rm = vimc_sen_rm,
},
{
.name = "Scaler",
- .drv = "vimc-scaler",
+ .add = vimc_sca_add,
+ .rm = vimc_sca_rm,
},
{
.name = "RGB/YUV Capture",
- .drv = "vimc-capture",
+ .add = vimc_cap_add,
+ .rm = vimc_cap_rm,
},
};
@@ -127,7 +112,7 @@ static const struct vimc_ent_link ent_links[] = {
VIMC_ENT_LINK(7, 1, 8, 0, MEDIA_LNK_FL_ENABLED | MEDIA_LNK_FL_IMMUTABLE),
};
-static const struct vimc_pipeline_config pipe_cfg = {
+static struct vimc_pipeline_config pipe_cfg = {
.ents = ent_config,
.num_ents = ARRAY_SIZE(ent_config),
.links = ent_links,
@@ -144,14 +129,11 @@ static int vimc_create_links(struct vimc_device *vimc)
/* Initialize the links between entities */
for (i = 0; i < vimc->pipe_cfg->num_links; i++) {
const struct vimc_ent_link *link = &vimc->pipe_cfg->links[i];
- /*
- * TODO: Check another way of retrieving ved struct without
- * relying on platform_get_drvdata
- */
+
struct vimc_ent_device *ved_src =
- platform_get_drvdata(vimc->subdevs[link->src_ent]);
+ vimc->pipe_cfg->ents[link->src_ent].ved;
struct vimc_ent_device *ved_sink =
- platform_get_drvdata(vimc->subdevs[link->sink_ent]);
+ vimc->pipe_cfg->ents[link->sink_ent].ved;
ret = media_create_pad_link(ved_src->ent, link->src_pad,
ved_sink->ent, link->sink_pad,
@@ -163,13 +145,28 @@ static int vimc_create_links(struct vimc_device *vimc)
return 0;
}
-static int vimc_comp_bind(struct device *master)
+static int vimc_add_subdevs(struct vimc_device *vimc)
{
- struct vimc_device *vimc = container_of(to_platform_device(master),
- struct vimc_device, pdev);
+ unsigned int i;
int ret;
- dev_dbg(master, "bind");
+ for (i = 0; i < vimc->pipe_cfg->num_ents; i++) {
+ dev_dbg(&vimc->pdev.dev, "new entity for %s\n",
+ vimc->pipe_cfg->ents[i].name);
+ ret = vimc->pipe_cfg->ents[i].add(vimc,
+ &vimc->pipe_cfg->ents[i]);
+ if (ret) {
+ dev_err(&vimc->pdev.dev, "add new entity for %s\n",
+ vimc->pipe_cfg->ents[i].name);
+ return ret;
+ }
+ }
+ return 0;
+}
+
+static int vimc_register_devices(struct vimc_device *vimc)
+{
+ int ret;
/* Register the v4l2 struct */
ret = v4l2_device_register(vimc->mdev.dev, &vimc->v4l2_dev);
@@ -179,22 +176,20 @@ static int vimc_comp_bind(struct device *master)
return ret;
}
- /* Bind subdevices */
- ret = component_bind_all(master, &vimc->v4l2_dev);
- if (ret)
- goto err_v4l2_unregister;
+ /* Invoke entity config hooks to initialize and register subdevs */
+ vimc_add_subdevs(vimc);
/* Initialize links */
ret = vimc_create_links(vimc);
if (ret)
- goto err_comp_unbind_all;
+ goto err_v4l2_unregister;
/* Register the media device */
ret = media_device_register(&vimc->mdev);
if (ret) {
dev_err(vimc->mdev.dev,
"media device register failed (err=%d)\n", ret);
- goto err_comp_unbind_all;
+ goto err_v4l2_unregister;
}
/* Expose all subdev's nodes*/
@@ -211,98 +206,36 @@ static int vimc_comp_bind(struct device *master)
err_mdev_unregister:
media_device_unregister(&vimc->mdev);
media_device_cleanup(&vimc->mdev);
-err_comp_unbind_all:
- component_unbind_all(master, NULL);
err_v4l2_unregister:
v4l2_device_unregister(&vimc->v4l2_dev);
return ret;
}
-static void vimc_comp_unbind(struct device *master)
+static void vimc_unregister(struct vimc_device *vimc)
{
- struct vimc_device *vimc = container_of(to_platform_device(master),
- struct vimc_device, pdev);
-
- dev_dbg(master, "unbind");
-
media_device_unregister(&vimc->mdev);
media_device_cleanup(&vimc->mdev);
- component_unbind_all(master, NULL);
v4l2_device_unregister(&vimc->v4l2_dev);
}
-static int vimc_comp_compare(struct device *comp, void *data)
-{
- return comp == data;
-}
-
-static struct component_match *vimc_add_subdevs(struct vimc_device *vimc)
-{
- struct component_match *match = NULL;
- struct vimc_platform_data pdata;
- int i;
-
- for (i = 0; i < vimc->pipe_cfg->num_ents; i++) {
- dev_dbg(&vimc->pdev.dev, "new pdev for %s\n",
- vimc->pipe_cfg->ents[i].drv);
-
- strscpy(pdata.entity_name, vimc->pipe_cfg->ents[i].name,
- sizeof(pdata.entity_name));
-
- vimc->subdevs[i] = platform_device_register_data(&vimc->pdev.dev,
- vimc->pipe_cfg->ents[i].drv,
- PLATFORM_DEVID_AUTO,
- &pdata,
- sizeof(pdata));
- if (IS_ERR(vimc->subdevs[i])) {
- match = ERR_CAST(vimc->subdevs[i]);
- while (--i >= 0)
- platform_device_unregister(vimc->subdevs[i]);
-
- return match;
- }
-
- component_match_add(&vimc->pdev.dev, &match, vimc_comp_compare,
- &vimc->subdevs[i]->dev);
- }
-
- return match;
-}
-
static void vimc_rm_subdevs(struct vimc_device *vimc)
{
unsigned int i;
for (i = 0; i < vimc->pipe_cfg->num_ents; i++)
- platform_device_unregister(vimc->subdevs[i]);
+ vimc->pipe_cfg->ents[i].rm(vimc, &vimc->pipe_cfg->ents[i]);
}
-static const struct component_master_ops vimc_comp_ops = {
- .bind = vimc_comp_bind,
- .unbind = vimc_comp_unbind,
-};
-
static int vimc_probe(struct platform_device *pdev)
{
struct vimc_device *vimc = container_of(pdev, struct vimc_device, pdev);
- struct component_match *match = NULL;
- int ret;
+ int ret = 0;
dev_dbg(&pdev->dev, "probe");
memset(&vimc->mdev, 0, sizeof(vimc->mdev));
- /* Create platform_device for each entity in the topology*/
- vimc->subdevs = devm_kcalloc(&vimc->pdev.dev, vimc->pipe_cfg->num_ents,
- sizeof(*vimc->subdevs), GFP_KERNEL);
- if (!vimc->subdevs)
- return -ENOMEM;
-
- match = vimc_add_subdevs(vimc);
- if (IS_ERR(match))
- return PTR_ERR(match);
-
/* Link the media device within the v4l2_device */
vimc->v4l2_dev.mdev = &vimc->mdev;
@@ -314,16 +247,11 @@ static int vimc_probe(struct platform_device *pdev)
vimc->mdev.dev = &pdev->dev;
media_device_init(&vimc->mdev);
- /* Add self to the component system */
- ret = component_master_add_with_match(&pdev->dev, &vimc_comp_ops,
- match);
- if (ret) {
+ ret = vimc_register_devices(vimc);
+ if (ret)
media_device_cleanup(&vimc->mdev);
- vimc_rm_subdevs(vimc);
- return ret;
- }
- return 0;
+ return ret;
}
static int vimc_remove(struct platform_device *pdev)
@@ -332,8 +260,8 @@ static int vimc_remove(struct platform_device *pdev)
dev_dbg(&pdev->dev, "remove");
- component_master_del(&pdev->dev, &vimc_comp_ops);
vimc_rm_subdevs(vimc);
+ vimc_unregister(vimc);
return 0;
}
diff --git a/drivers/media/platform/vimc/vimc-debayer.c b/drivers/media/platform/vimc/vimc-debayer.c
index 00598fbf3cba..3b4e73c10a03 100644
--- a/drivers/media/platform/vimc/vimc-debayer.c
+++ b/drivers/media/platform/vimc/vimc-debayer.c
@@ -5,19 +5,14 @@
* Copyright (C) 2015-2017 Helen Koike <[email protected]>
*/
-#include <linux/component.h>
#include <linux/module.h>
-#include <linux/mod_devicetable.h>
-#include <linux/platform_device.h>
#include <linux/vmalloc.h>
#include <linux/v4l2-mediabus.h>
#include <media/v4l2-subdev.h>
#include "vimc-common.h"
-#define VIMC_DEB_DRV_NAME "vimc-debayer"
-/* This module only supports transforming a bayer format
- * to V4L2_PIX_FMT_RGB24
+/* Supports transforming a bayer format to V4L2_PIX_FMT_RGB24
*/
#define VIMC_DEB_SRC_PIXFMT V4L2_PIX_FMT_RGB24
#define VIMC_DEB_SRC_MBUS_FMT_DEFAULT MEDIA_BUS_FMT_RGB888_1X24
@@ -513,21 +508,19 @@ static const struct v4l2_subdev_internal_ops vimc_deb_int_ops = {
.release = vimc_deb_release,
};
-static void vimc_deb_comp_unbind(struct device *comp, struct device *master,
- void *master_data)
+void vimc_deb_rm(struct vimc_device *vimc, struct vimc_ent_config *vent)
{
- struct vimc_ent_device *ved = dev_get_drvdata(comp);
- struct vimc_deb_device *vdeb = container_of(ved, struct vimc_deb_device,
+ struct vimc_ent_device *ved = vent->ved;
+ struct vimc_deb_device *vdeb = container_of(ved,
+ struct vimc_deb_device,
ved);
vimc_ent_sd_unregister(ved, &vdeb->sd);
}
-static int vimc_deb_comp_bind(struct device *comp, struct device *master,
- void *master_data)
+int vimc_deb_add(struct vimc_device *vimc, struct vimc_ent_config *vent)
{
- struct v4l2_device *v4l2_dev = master_data;
- struct vimc_platform_data *pdata = comp->platform_data;
+ struct v4l2_device *v4l2_dev = &vimc->v4l2_dev;
struct vimc_deb_device *vdeb;
int ret;
@@ -538,7 +531,7 @@ static int vimc_deb_comp_bind(struct device *comp, struct device *master,
/* Initialize ved and sd */
ret = vimc_ent_sd_register(&vdeb->ved, &vdeb->sd, v4l2_dev,
- pdata->entity_name,
+ vent->name,
MEDIA_ENT_F_PROC_VIDEO_PIXEL_ENC_CONV, 2,
(const unsigned long[2]) {MEDIA_PAD_FL_SINK,
MEDIA_PAD_FL_SOURCE},
@@ -549,8 +542,7 @@ static int vimc_deb_comp_bind(struct device *comp, struct device *master,
}
vdeb->ved.process_frame = vimc_deb_process_frame;
- dev_set_drvdata(comp, &vdeb->ved);
- vdeb->dev = comp;
+ vdeb->dev = &vimc->pdev.dev;
/* Initialize the frame format */
vdeb->sink_fmt = sink_fmt_default;
@@ -563,46 +555,6 @@ static int vimc_deb_comp_bind(struct device *comp, struct device *master,
*/
vdeb->set_rgb_src = vimc_deb_set_rgb_pix_rgb24;
+ vent->ved = &vdeb->ved;
return 0;
}
-
-static const struct component_ops vimc_deb_comp_ops = {
- .bind = vimc_deb_comp_bind,
- .unbind = vimc_deb_comp_unbind,
-};
-
-static int vimc_deb_probe(struct platform_device *pdev)
-{
- return component_add(&pdev->dev, &vimc_deb_comp_ops);
-}
-
-static int vimc_deb_remove(struct platform_device *pdev)
-{
- component_del(&pdev->dev, &vimc_deb_comp_ops);
-
- return 0;
-}
-
-static const struct platform_device_id vimc_deb_driver_ids[] = {
- {
- .name = VIMC_DEB_DRV_NAME,
- },
- { }
-};
-
-static struct platform_driver vimc_deb_pdrv = {
- .probe = vimc_deb_probe,
- .remove = vimc_deb_remove,
- .id_table = vimc_deb_driver_ids,
- .driver = {
- .name = VIMC_DEB_DRV_NAME,
- },
-};
-
-module_platform_driver(vimc_deb_pdrv);
-
-MODULE_DEVICE_TABLE(platform, vimc_deb_driver_ids);
-
-MODULE_DESCRIPTION("Virtual Media Controller Driver (VIMC) Debayer");
-MODULE_AUTHOR("Helen Mae Koike Fornazier <[email protected]>");
-MODULE_LICENSE("GPL");
diff --git a/drivers/media/platform/vimc/vimc-scaler.c b/drivers/media/platform/vimc/vimc-scaler.c
index c7123a45c55b..cb5eb42de69d 100644
--- a/drivers/media/platform/vimc/vimc-scaler.c
+++ b/drivers/media/platform/vimc/vimc-scaler.c
@@ -5,18 +5,13 @@
* Copyright (C) 2015-2017 Helen Koike <[email protected]>
*/
-#include <linux/component.h>
#include <linux/module.h>
-#include <linux/mod_devicetable.h>
-#include <linux/platform_device.h>
#include <linux/vmalloc.h>
#include <linux/v4l2-mediabus.h>
#include <media/v4l2-subdev.h>
#include "vimc-common.h"
-#define VIMC_SCA_DRV_NAME "vimc-scaler"
-
static unsigned int sca_mult = 3;
module_param(sca_mult, uint, 0000);
MODULE_PARM_DESC(sca_mult, " the image size multiplier");
@@ -344,22 +339,21 @@ static const struct v4l2_subdev_internal_ops vimc_sca_int_ops = {
.release = vimc_sca_release,
};
-static void vimc_sca_comp_unbind(struct device *comp, struct device *master,
- void *master_data)
+void vimc_sca_rm(struct vimc_device *vimc, struct vimc_ent_config *vent)
{
- struct vimc_ent_device *ved = dev_get_drvdata(comp);
- struct vimc_sca_device *vsca = container_of(ved, struct vimc_sca_device,
+ struct vimc_ent_device *ved = vent->ved;
+ struct vimc_sca_device *vsca = container_of(ved,
+ struct vimc_sca_device,
ved);
+
vimc_ent_sd_unregister(ved, &vsca->sd);
}
-static int vimc_sca_comp_bind(struct device *comp, struct device *master,
- void *master_data)
+int vimc_sca_add(struct vimc_device *vimc, struct vimc_ent_config *vent)
{
- struct v4l2_device *v4l2_dev = master_data;
- struct vimc_platform_data *pdata = comp->platform_data;
+ struct v4l2_device *v4l2_dev = &vimc->v4l2_dev;
struct vimc_sca_device *vsca;
int ret;
@@ -370,7 +364,7 @@ static int vimc_sca_comp_bind(struct device *comp, struct device *master,
/* Initialize ved and sd */
ret = vimc_ent_sd_register(&vsca->ved, &vsca->sd, v4l2_dev,
- pdata->entity_name,
+ vent->name,
MEDIA_ENT_F_PROC_VIDEO_SCALER, 2,
(const unsigned long[2]) {MEDIA_PAD_FL_SINK,
MEDIA_PAD_FL_SOURCE},
@@ -381,52 +375,12 @@ static int vimc_sca_comp_bind(struct device *comp, struct device *master,
}
vsca->ved.process_frame = vimc_sca_process_frame;
- dev_set_drvdata(comp, &vsca->ved);
- vsca->dev = comp;
+ vsca->dev = &vimc->pdev.dev;
+
+ vent->ved = &vsca->ved;
/* Initialize the frame format */
vsca->sink_fmt = sink_fmt_default;
return 0;
}
-
-static const struct component_ops vimc_sca_comp_ops = {
- .bind = vimc_sca_comp_bind,
- .unbind = vimc_sca_comp_unbind,
-};
-
-static int vimc_sca_probe(struct platform_device *pdev)
-{
- return component_add(&pdev->dev, &vimc_sca_comp_ops);
-}
-
-static int vimc_sca_remove(struct platform_device *pdev)
-{
- component_del(&pdev->dev, &vimc_sca_comp_ops);
-
- return 0;
-}
-
-static const struct platform_device_id vimc_sca_driver_ids[] = {
- {
- .name = VIMC_SCA_DRV_NAME,
- },
- { }
-};
-
-static struct platform_driver vimc_sca_pdrv = {
- .probe = vimc_sca_probe,
- .remove = vimc_sca_remove,
- .id_table = vimc_sca_driver_ids,
- .driver = {
- .name = VIMC_SCA_DRV_NAME,
- },
-};
-
-module_platform_driver(vimc_sca_pdrv);
-
-MODULE_DEVICE_TABLE(platform, vimc_sca_driver_ids);
-
-MODULE_DESCRIPTION("Virtual Media Controller Driver (VIMC) Scaler");
-MODULE_AUTHOR("Helen Mae Koike Fornazier <[email protected]>");
-MODULE_LICENSE("GPL");
diff --git a/drivers/media/platform/vimc/vimc-sensor.c b/drivers/media/platform/vimc/vimc-sensor.c
index 51359472eef2..70b195b817a4 100644
--- a/drivers/media/platform/vimc/vimc-sensor.c
+++ b/drivers/media/platform/vimc/vimc-sensor.c
@@ -5,10 +5,6 @@
* Copyright (C) 2015-2017 Helen Koike <[email protected]>
*/
-#include <linux/component.h>
-#include <linux/module.h>
-#include <linux/mod_devicetable.h>
-#include <linux/platform_device.h>
#include <linux/v4l2-mediabus.h>
#include <linux/vmalloc.h>
#include <media/v4l2-ctrls.h>
@@ -18,8 +14,6 @@
#include "vimc-common.h"
-#define VIMC_SEN_DRV_NAME "vimc-sensor"
-
struct vimc_sen_device {
struct vimc_ent_device ved;
struct v4l2_subdev sd;
@@ -279,12 +273,12 @@ static const struct v4l2_subdev_internal_ops vimc_sen_int_ops = {
.release = vimc_sen_release,
};
-static void vimc_sen_comp_unbind(struct device *comp, struct device *master,
- void *master_data)
+void vimc_sen_rm(struct vimc_device *vimc, struct vimc_ent_config *vent)
{
- struct vimc_ent_device *ved = dev_get_drvdata(comp);
- struct vimc_sen_device *vsen =
- container_of(ved, struct vimc_sen_device, ved);
+ struct vimc_ent_device *ved = vent->ved;
+ struct vimc_sen_device *vsen = container_of(ved,
+ struct vimc_sen_device,
+ ved);
vimc_ent_sd_unregister(ved, &vsen->sd);
}
@@ -306,11 +300,9 @@ static const struct v4l2_ctrl_config vimc_sen_ctrl_test_pattern = {
.qmenu = tpg_pattern_strings,
};
-static int vimc_sen_comp_bind(struct device *comp, struct device *master,
- void *master_data)
+int vimc_sen_add(struct vimc_device *vimc, struct vimc_ent_config *vent)
{
- struct v4l2_device *v4l2_dev = master_data;
- struct vimc_platform_data *pdata = comp->platform_data;
+ struct v4l2_device *v4l2_dev = &vimc->v4l2_dev;
struct vimc_sen_device *vsen;
int ret;
@@ -343,7 +335,7 @@ static int vimc_sen_comp_bind(struct device *comp, struct device *master,
/* Initialize ved and sd */
ret = vimc_ent_sd_register(&vsen->ved, &vsen->sd, v4l2_dev,
- pdata->entity_name,
+ vent->name,
MEDIA_ENT_F_CAM_SENSOR, 1,
(const unsigned long[1]) {MEDIA_PAD_FL_SOURCE},
&vimc_sen_int_ops, &vimc_sen_ops);
@@ -351,8 +343,7 @@ static int vimc_sen_comp_bind(struct device *comp, struct device *master,
goto err_free_hdl;
vsen->ved.process_frame = vimc_sen_process_frame;
- dev_set_drvdata(comp, &vsen->ved);
- vsen->dev = comp;
+ vsen->dev = &vimc->pdev.dev;
/* Initialize the frame format */
vsen->mbus_format = fmt_default;
@@ -364,6 +355,7 @@ static int vimc_sen_comp_bind(struct device *comp, struct device *master,
if (ret)
goto err_unregister_ent_sd;
+ vent->ved = &vsen->ved;
return 0;
err_unregister_ent_sd:
@@ -375,44 +367,3 @@ static int vimc_sen_comp_bind(struct device *comp, struct device *master,
return ret;
}
-
-static const struct component_ops vimc_sen_comp_ops = {
- .bind = vimc_sen_comp_bind,
- .unbind = vimc_sen_comp_unbind,
-};
-
-static int vimc_sen_probe(struct platform_device *pdev)
-{
- return component_add(&pdev->dev, &vimc_sen_comp_ops);
-}
-
-static int vimc_sen_remove(struct platform_device *pdev)
-{
- component_del(&pdev->dev, &vimc_sen_comp_ops);
-
- return 0;
-}
-
-static const struct platform_device_id vimc_sen_driver_ids[] = {
- {
- .name = VIMC_SEN_DRV_NAME,
- },
- { }
-};
-
-static struct platform_driver vimc_sen_pdrv = {
- .probe = vimc_sen_probe,
- .remove = vimc_sen_remove,
- .id_table = vimc_sen_driver_ids,
- .driver = {
- .name = VIMC_SEN_DRV_NAME,
- },
-};
-
-module_platform_driver(vimc_sen_pdrv);
-
-MODULE_DEVICE_TABLE(platform, vimc_sen_driver_ids);
-
-MODULE_DESCRIPTION("Virtual Media Controller Driver (VIMC) Sensor");
-MODULE_AUTHOR("Helen Mae Koike Fornazier <[email protected]>");
-MODULE_LICENSE("GPL");
--
2.17.1
Hi Shuah,
Thanks for the patches.
On 8/15/19 4:42 PM, Shuah Khan wrote:
> vimc uses Component API to split the driver into functional components.
> The real hardware resembles a monolith structure than component and
> component structure added a level of complexity making it hard to
> maintain without adding any real benefit.
>
> The sensor is one vimc component that would makes sense to be a separate
> module to closely align with the real hardware. It would be easier to
> collapse vimc into single monolithic driver first and then split the
> sensor off as a separate module.
>
> This patch series removes the component API and makes minimal changes to
> the code base preserving the functional division of the code structure.
> Preserving the functional structure allows us to split the sensor off
> as a separate module in the future.
>
> Major design elements in this change are:
> - Use existing struct vimc_ent_config and struct vimc_pipeline_config
> to drive the initialization of the functional components.
> - Make vimc_device and vimc_ent_config global by moving them to
> vimc-common.h
> - Add two new hooks add and rm to initialize and register, unregister
> and free subdevs.
> - All component API is now gone and bind and unbind hooks are modified
> to do "add" and "rm" with minimal changes to just add and rm subdevs.
> - vimc-core's bind and unbind are now register and unregister.
> - vimc-core invokes "add" hooks from its vimc_register_devices().
> The "add" hooks remain the same and register subdevs. They don't
> create platform devices of their own and use vimc's pdev.dev as
> their reference device. The "add" hooks save their vimc_ent_device(s)
> in the corresponding vimc_ent_config.
> - vimc-core invokes "rm" hooks from its unregister to unregister
> subdevs and cleanup.
> - vimc-core invokes "add" and "rm" hooks with pointer to struct
> vimc_device and the corresponding struct vimc_ent_config pointer.
>
> The following configure and stream test works on all devices.
>
> media-ctl -d platform:vimc -V '"Sensor A":0[fmt:SBGGR8_1X8/640x480]'
> media-ctl -d platform:vimc -V '"Debayer A":0[fmt:SBGGR8_1X8/640x480]'
> media-ctl -d platform:vimc -V '"Sensor B":0[fmt:SBGGR8_1X8/640x480]'
> media-ctl -d platform:vimc -V '"Debayer B":0[fmt:SBGGR8_1X8/640x480]'
>
> v4l2-ctl -z platform:vimc -d "RGB/YUV Capture" -v width=1920,height=1440
> v4l2-ctl -z platform:vimc -d "Raw Capture 0" -v pixelformat=BA81
> v4l2-ctl -z platform:vimc -d "Raw Capture 1" -v pixelformat=BA81
>
> v4l2-ctl --stream-mmap --stream-count=100 -d /dev/video1
> v4l2-ctl --stream-mmap --stream-count=100 -d /dev/video2
> v4l2-ctl --stream-mmap --stream-count=100 -d /dev/video3
>
> The second patch in the series fixes a general protection fault found
> when rmmod is done while stream is active.
>
> - rmmod while streaming returns vimc is in use
> - rmmod without active stream works correctly
>
> Changes since v1:
> Patch 1 & 2: (patch 1 in this series)
> - Collapsed the two patches into one
> - Added common defines (vimc_device and vimc_ent_config) to vimc-common.h
> based on our discussion.
> - Addressed review comments from Helen and Laurent
> - Use vimc-common.h instead of creating a new file.
> - Other minor comments from Helen on int vs. unsigned int and
> not needing to initialize ret in vimc_add_subdevs()
> Patch 3 (patch 2 in this series):
> - The second patch is the fix for gpf. Updated the patch after looking
> at the test results from Andre and Helen. This problem is in a common
> code and impacts all subdevs. The fix addresses the core problem and
> fixes it. Fix removes pads release from v4l2_device_unregister_subdev()
> and pads are now released from the sd release handler with all other
> resources.
>
> Outstanding:
> - Update documentation with the correct topology.
> - There is one outstanding gpf remaining in the unbind path. I will
> fix that in a separate patch. This is an existing problem and will
> be easier to fix on top of this patch series.
>
> vimc_print_dot (--print-dot) topology after this change: (no change
> compared to media master)
> digraph board {
> rankdir=TB
> n00000001 [label="{{} | Sensor A\n/dev/v4l-subdev0 | {<port0> 0}}", shape=Mrecord, style=filled, fillcolor=green]
> n00000001:port0 -> n00000005:port0 [style=bold]
> n00000001:port0 -> n0000000b [style=bold]
> n00000003 [label="{{} | Sensor B\n/dev/v4l-subdev1 | {<port0> 0}}", shape=Mrecord, style=filled, fillcolor=green]
> n00000003:port0 -> n00000008:port0 [style=bold]
> n00000003:port0 -> n0000000f [style=bold]
> n00000005 [label="{{<port0> 0} | Debayer A\n/dev/v4l-subdev2 | {<port1> 1}}", shape=Mrecord, style=filled, fillcolor=green]
> n00000005:port1 -> n00000015:port0
> n00000008 [label="{{<port0> 0} | Debayer B\n/dev/v4l-subdev3 | {<port1> 1}}", shape=Mrecord, style=filled, fillcolor=green]
> n00000008:port1 -> n00000015:port0 [style=dashed]
> n0000000b [label="Raw Capture 0\n/dev/video1", shape=box, style=filled, fillcolor=yellow]
> n0000000f [label="Raw Capture 1\n/dev/video2", shape=box, style=filled, fillcolor=yellow]
> n00000013 [label="{{} | RGB/YUV Input\n/dev/v4l-subdev4 | {<port0> 0}}", shape=Mrecord, style=filled, fillcolor=green]
> n00000013:port0 -> n00000015:port0 [style=dashed]
> n00000015 [label="{{<port0> 0} | Scaler\n/dev/v4l-subdev5 | {<port1> 1}}", shape=Mrecord, style=filled, fillcolor=green]
> n00000015:port1 -> n00000018 [style=bold]
> n00000018 [label="RGB/YUV Capture\n/dev/video3", shape=box, style=filled, fillcolor=yellow]
>
> Shuah Khan (2):
> media: vimc: Collapse component structure into a single monolithic
> driver
> media: vimc: Fix gpf in rmmod path when stream is active
I couldn't apply those on top of media/master, I think they are
conflicting with the two "Reverts" commits in vimc.
Regards,
Helen
>
> drivers/media/platform/vimc/Makefile | 7 +-
> drivers/media/platform/vimc/vimc-capture.c | 75 ++-------
> drivers/media/platform/vimc/vimc-common.c | 3 +-
> drivers/media/platform/vimc/vimc-common.h | 54 ++++++
> drivers/media/platform/vimc/vimc-core.c | 182 +++++++--------------
> drivers/media/platform/vimc/vimc-debayer.c | 69 ++------
> drivers/media/platform/vimc/vimc-scaler.c | 69 ++------
> drivers/media/platform/vimc/vimc-sensor.c | 70 ++------
> 8 files changed, 161 insertions(+), 368 deletions(-)
>
Hi Shuah,
Thanks for the patch, just some small comments below.
On 8/15/19 4:42 PM, Shuah Khan wrote:
> vimc uses Component API to split the driver into functional components.
> The real hardware resembles a monolith structure than component and
> component structure added a level of complexity making it hard to
> maintain without adding any real benefit.
>
> The sensor is one vimc component that would makes sense to be a separate
> module to closely align with the real hardware. It would be easier to
> collapse vimc into single monolithic driver first and then split the
> sensor off as a separate module.
>
> Collapse it into a single monolithic driver removing the Component API.
> This patch removes the component API and makes minimal changes to the
> code base preserving the functional division of the code structure.
> Preserving the functional structure allows us to split the sensor off
> as a separate module in the future.
>
> Major design elements in this change are:
> - Use existing struct vimc_ent_config and struct vimc_pipeline_config
> to drive the initialization of the functional components.
> - Make vimc_device and vimc_ent_config global by moving them to
> vimc-common.h
> - Add two new hooks add and rm to initialize and register, unregister
> and free subdevs.
> - All component API is now gone and bind and unbind hooks are modified
> to do "add" and "rm" with minimal changes to just add and rm subdevs.
> - vimc-core's bind and unbind are now register and unregister.
> - vimc-core invokes "add" hooks from its vimc_register_devices().
> The "add" hooks remain the same and register subdevs. They don't
> create platform devices of their own and use vimc's pdev.dev as
> their reference device. The "add" hooks save their vimc_ent_device(s)
> in the corresponding vimc_ent_config.
> - vimc-core invokes "rm" hooks from its unregister to unregister subdevs
> and cleanup.
> - vimc-core invokes "add" and "rm" hooks with pointer to struct vimc_device
> and the corresponding struct vimc_ent_config pointer.
>
> The following configure and stream test works on all devices.
>
> media-ctl -d platform:vimc -V '"Sensor A":0[fmt:SBGGR8_1X8/640x480]'
> media-ctl -d platform:vimc -V '"Debayer A":0[fmt:SBGGR8_1X8/640x480]'
> media-ctl -d platform:vimc -V '"Sensor B":0[fmt:SBGGR8_1X8/640x480]'
> media-ctl -d platform:vimc -V '"Debayer B":0[fmt:SBGGR8_1X8/640x480]'
>
> v4l2-ctl -z platform:vimc -d "RGB/YUV Capture" -v width=1920,height=1440
> v4l2-ctl -z platform:vimc -d "Raw Capture 0" -v pixelformat=BA81
> v4l2-ctl -z platform:vimc -d "Raw Capture 1" -v pixelformat=BA81
>
> v4l2-ctl --stream-mmap --stream-count=100 -d /dev/video1
> v4l2-ctl --stream-mmap --stream-count=100 -d /dev/video2
> v4l2-ctl --stream-mmap --stream-count=100 -d /dev/video3
>
> Signed-off-by: Shuah Khan <[email protected]>
> ---
> drivers/media/platform/vimc/Makefile | 7 +-
> drivers/media/platform/vimc/vimc-capture.c | 75 ++-------
> drivers/media/platform/vimc/vimc-common.h | 54 ++++++
> drivers/media/platform/vimc/vimc-core.c | 182 +++++++--------------
> drivers/media/platform/vimc/vimc-debayer.c | 68 ++------
> drivers/media/platform/vimc/vimc-scaler.c | 68 ++------
> drivers/media/platform/vimc/vimc-sensor.c | 69 ++------
> 7 files changed, 157 insertions(+), 366 deletions(-)
>
> diff --git a/drivers/media/platform/vimc/Makefile b/drivers/media/platform/vimc/Makefile
> index 96d06f030c31..a53b2b532e9f 100644
> --- a/drivers/media/platform/vimc/Makefile
> +++ b/drivers/media/platform/vimc/Makefile
> @@ -1,5 +1,6 @@
> # SPDX-License-Identifier: GPL-2.0
> -vimc-y := vimc-core.o vimc-common.o vimc-streamer.o
> +vimc-y := vimc-core.o vimc-common.o vimc-streamer.o vimc-capture.o \
> + vimc-debayer.o vimc-scaler.o vimc-sensor.o
> +
> +obj-$(CONFIG_VIDEO_VIMC) += vimc.o
>
> -obj-$(CONFIG_VIDEO_VIMC) += vimc.o vimc-capture.o vimc-debayer.o \
> - vimc-scaler.o vimc-sensor.o
> diff --git a/drivers/media/platform/vimc/vimc-capture.c b/drivers/media/platform/vimc/vimc-capture.c
> index 664855708fdf..0b5cd38fbeb9 100644
> --- a/drivers/media/platform/vimc/vimc-capture.c
> +++ b/drivers/media/platform/vimc/vimc-capture.c
> @@ -5,10 +5,6 @@
> * Copyright (C) 2015-2017 Helen Koike <[email protected]>
> */
>
> -#include <linux/component.h>
> -#include <linux/module.h>
> -#include <linux/mod_devicetable.h>
> -#include <linux/platform_device.h>
> #include <media/v4l2-ioctl.h>
> #include <media/videobuf2-core.h>
> #include <media/videobuf2-vmalloc.h>
> @@ -16,8 +12,6 @@
> #include "vimc-common.h"
> #include "vimc-streamer.h"
>
> -#define VIMC_CAP_DRV_NAME "vimc-capture"
> -
> static const u32 vimc_cap_supported_pixfmt[] = {
> V4L2_PIX_FMT_BGR24,
> V4L2_PIX_FMT_RGB24,
> @@ -367,11 +361,11 @@ static void vimc_cap_release(struct video_device *vdev)
> kfree(vcap);
> }
>
> -static void vimc_cap_comp_unbind(struct device *comp, struct device *master,
> - void *master_data)
> +void vimc_cap_rm(struct vimc_device *vimc, struct vimc_ent_config *vent)
This is just a detail (is up to you), but I would rename vent to something what
would reflect the "config" part of vimc_ent_config, maybe vec to contrast with ved?
Or vent_c ?
As I said is it just a detail to help not to confuse it with the vimc_ent_device.
Feel free to take this suggestion or not.
This comment also applies to other usages of vimc_add_subdevs below.
> {
> - struct vimc_ent_device *ved = dev_get_drvdata(comp);
> - struct vimc_cap_device *vcap = container_of(ved, struct vimc_cap_device,
> + struct vimc_ent_device *ved = vent->ved;
> + struct vimc_cap_device *vcap = container_of(ved,
> + struct vimc_cap_device,
> ved);
>
> vb2_queue_release(&vcap->queue);
> @@ -418,11 +412,9 @@ static void *vimc_cap_process_frame(struct vimc_ent_device *ved,
> return NULL;
> }
>
> -static int vimc_cap_comp_bind(struct device *comp, struct device *master,
> - void *master_data)
> +int vimc_cap_add(struct vimc_device *vimc, struct vimc_ent_config *vent)
> {
> - struct v4l2_device *v4l2_dev = master_data;
> - struct vimc_platform_data *pdata = comp->platform_data;
> + struct v4l2_device *v4l2_dev = &vimc->v4l2_dev;
> struct vimc_cap_device *vcap;
> struct video_device *vdev;
> struct vb2_queue *q;
> @@ -442,7 +434,7 @@ static int vimc_cap_comp_bind(struct device *comp, struct device *master,
> }
>
> /* Initialize the media entity */
> - vcap->vdev.entity.name = pdata->entity_name;
> + vcap->vdev.entity.name = vent->name;
> vcap->vdev.entity.function = MEDIA_ENT_F_IO_V4L;
> ret = media_entity_pads_init(&vcap->vdev.entity,
> 1, vcap->ved.pads);
> @@ -466,8 +458,8 @@ static int vimc_cap_comp_bind(struct device *comp, struct device *master,
>
> ret = vb2_queue_init(q);
> if (ret) {
> - dev_err(comp, "%s: vb2 queue init failed (err=%d)\n",
> - pdata->entity_name, ret);
> + dev_err(&vimc->pdev.dev, "%s: vb2 queue init failed (err=%d)\n",
> + vent->name, ret);
> goto err_clean_m_ent;
> }
>
> @@ -484,8 +476,7 @@ static int vimc_cap_comp_bind(struct device *comp, struct device *master,
> vcap->ved.ent = &vcap->vdev.entity;
> vcap->ved.process_frame = vimc_cap_process_frame;
> vcap->ved.vdev_get_format = vimc_cap_get_format;
> - dev_set_drvdata(comp, &vcap->ved);
> - vcap->dev = comp;
> + vcap->dev = &vimc->pdev.dev;
>
> /* Initialize the video_device struct */
> vdev = &vcap->vdev;
> @@ -498,17 +489,18 @@ static int vimc_cap_comp_bind(struct device *comp, struct device *master,
> vdev->queue = q;
> vdev->v4l2_dev = v4l2_dev;
> vdev->vfl_dir = VFL_DIR_RX;
> - strscpy(vdev->name, pdata->entity_name, sizeof(vdev->name));
> + strscpy(vdev->name, vent->name, sizeof(vdev->name));
> video_set_drvdata(vdev, &vcap->ved);
>
> /* Register the video_device with the v4l2 and the media framework */
> ret = video_register_device(vdev, VFL_TYPE_GRABBER, -1);
> if (ret) {
> - dev_err(comp, "%s: video register failed (err=%d)\n",
> + dev_err(&vimc->pdev.dev, "%s: video register failed (err=%d)\n",
> vcap->vdev.name, ret);
> goto err_release_queue;
> }
>
> + vent->ved = &vcap->ved;
> return 0;
>
> err_release_queue:
> @@ -522,44 +514,3 @@ static int vimc_cap_comp_bind(struct device *comp, struct device *master,
>
> return ret;
> }
> -
> -static const struct component_ops vimc_cap_comp_ops = {
> - .bind = vimc_cap_comp_bind,
> - .unbind = vimc_cap_comp_unbind,
> -};
> -
> -static int vimc_cap_probe(struct platform_device *pdev)
> -{
> - return component_add(&pdev->dev, &vimc_cap_comp_ops);
> -}
> -
> -static int vimc_cap_remove(struct platform_device *pdev)
> -{
> - component_del(&pdev->dev, &vimc_cap_comp_ops);
> -
> - return 0;
> -}
> -
> -static const struct platform_device_id vimc_cap_driver_ids[] = {
> - {
> - .name = VIMC_CAP_DRV_NAME,
> - },
> - { }
> -};
> -
> -static struct platform_driver vimc_cap_pdrv = {
> - .probe = vimc_cap_probe,
> - .remove = vimc_cap_remove,
> - .id_table = vimc_cap_driver_ids,
> - .driver = {
> - .name = VIMC_CAP_DRV_NAME,
> - },
> -};
> -
> -module_platform_driver(vimc_cap_pdrv);
> -
> -MODULE_DEVICE_TABLE(platform, vimc_cap_driver_ids);
> -
> -MODULE_DESCRIPTION("Virtual Media Controller Driver (VIMC) Capture");
> -MODULE_AUTHOR("Helen Mae Koike Fornazier <[email protected]>");
> -MODULE_LICENSE("GPL");
> diff --git a/drivers/media/platform/vimc/vimc-common.h b/drivers/media/platform/vimc/vimc-common.h
> index 7b4d988b208b..cfc9143686b0 100644
> --- a/drivers/media/platform/vimc/vimc-common.h
> +++ b/drivers/media/platform/vimc/vimc-common.h
> @@ -9,6 +9,7 @@
> #define _VIMC_COMMON_H_
>
> #include <linux/slab.h>
> +#include <linux/platform_device.h>
> #include <media/media-device.h>
> #include <media/v4l2-device.h>
>
> @@ -69,6 +70,28 @@ struct vimc_platform_data {
> char entity_name[32];
> };
>
> +/**
> + * struct vimc_device - main device for vimc driver
> + *
> + * @pdev pointer to the platform device
> + * @pipe_cfg pointer to the vimc pipeline configuration structure
> + * @mdev the associated media_device parent
> + * @v4l2_dev Internal v4l2 parent device
> + */
> +struct vimc_device {
> + /* The platform device */
I think we can drop this comments in the struct as we have them in the top.
> + struct platform_device pdev;
> +
> + /* The pipeline configuration */
> + const struct vimc_pipeline_config *pipe_cfg;
> +
> + /* The Associated media_device parent */
> + struct media_device mdev;
> +
> + /* Internal v4l2 parent device */
> + struct v4l2_device v4l2_dev;
> +};
> +
> /**
> * struct vimc_ent_device - core struct that represents a node in the topology
> *
> @@ -97,6 +120,37 @@ struct vimc_ent_device {
> struct v4l2_pix_format *fmt);
> };
>
> +/**
> + * struct vimc_ent_config Structure which describes individual
> + * configuration for each entity
> + *
> + * @name entity name
> + * @ved pointer to vimc_ent_device (a node in the topology)
> + * @add subdev add hook - initializes and registers subdev
> + * called from vimc-core
> + * @rm subdev rm hook - unregisters and frees subdev
> + * called from vimc-core
> + */
> +struct vimc_ent_config {
> + const char *name;
> + struct vimc_ent_device *ved;
> + int (*add)(struct vimc_device *vimc, struct vimc_ent_config *vent);
> + void (*rm)(struct vimc_device *vimc, struct vimc_ent_config *vent);
> +};
> +
> +/* prototypes for vimc_ent_config add and rm hooks */
> +int vimc_cap_add(struct vimc_device *vimc, struct vimc_ent_config *vent);
> +void vimc_cap_rm(struct vimc_device *vimc, struct vimc_ent_config *vent);
> +
> +int vimc_deb_add(struct vimc_device *vimc, struct vimc_ent_config *vent);
> +void vimc_deb_rm(struct vimc_device *vimc, struct vimc_ent_config *vent);
> +
> +int vimc_sca_add(struct vimc_device *vimc, struct vimc_ent_config *vent);
> +void vimc_sca_rm(struct vimc_device *vimc, struct vimc_ent_config *vent);
> +
> +int vimc_sen_add(struct vimc_device *vimc, struct vimc_ent_config *vent);
> +void vimc_sen_rm(struct vimc_device *vimc, struct vimc_ent_config *vent);
> +
> /**
> * vimc_mbus_code_supported - helper to check supported mbus codes
> *
> diff --git a/drivers/media/platform/vimc/vimc-core.c b/drivers/media/platform/vimc/vimc-core.c
> index 571c55aa0e16..334f60468d06 100644
> --- a/drivers/media/platform/vimc/vimc-core.c
> +++ b/drivers/media/platform/vimc/vimc-core.c
> @@ -5,7 +5,6 @@
> * Copyright (C) 2015-2017 Helen Koike <[email protected]>
> */
>
> -#include <linux/component.h>
> #include <linux/init.h>
> #include <linux/module.h>
> #include <linux/platform_device.h>
> @@ -24,29 +23,6 @@
> .flags = link_flags, \
> }
>
> -struct vimc_device {
> - /* The platform device */
> - struct platform_device pdev;
> -
> - /* The pipeline configuration */
> - const struct vimc_pipeline_config *pipe_cfg;
> -
> - /* The Associated media_device parent */
> - struct media_device mdev;
> -
> - /* Internal v4l2 parent device*/
> - struct v4l2_device v4l2_dev;
> -
> - /* Subdevices */
> - struct platform_device **subdevs;
> -};
> -
> -/* Structure which describes individual configuration for each entity */
> -struct vimc_ent_config {
> - const char *name;
> - const char *drv;
> -};
> -
> /* Structure which describes links between entities */
> struct vimc_ent_link {
> unsigned int src_ent;
> @@ -58,7 +34,7 @@ struct vimc_ent_link {
>
> /* Structure which describes the whole topology */
> struct vimc_pipeline_config {
> - const struct vimc_ent_config *ents;
> + struct vimc_ent_config *ents;
> size_t num_ents;
> const struct vimc_ent_link *links;
> size_t num_links;
> @@ -68,43 +44,52 @@ struct vimc_pipeline_config {
> * Topology Configuration
> */
>
> -static const struct vimc_ent_config ent_config[] = {
> +static struct vimc_ent_config ent_config[] = {
> {
> .name = "Sensor A",
> - .drv = "vimc-sensor",
> + .add = vimc_sen_add,
> + .rm = vimc_sen_rm,
> },
> {
> .name = "Sensor B",
> - .drv = "vimc-sensor",
> + .add = vimc_sen_add,
> + .rm = vimc_sen_rm,
> },
> {
> .name = "Debayer A",
> - .drv = "vimc-debayer",
> + .add = vimc_deb_add,
> + .rm = vimc_deb_rm,
> },
> {
> .name = "Debayer B",
> - .drv = "vimc-debayer",
> + .add = vimc_deb_add,
> + .rm = vimc_deb_rm,
> },
> {
> .name = "Raw Capture 0",
> - .drv = "vimc-capture",
> + .add = vimc_cap_add,
> + .rm = vimc_cap_rm,
> },
> {
> .name = "Raw Capture 1",
> - .drv = "vimc-capture",
> + .add = vimc_cap_add,
> + .rm = vimc_cap_rm,
> },
> {
> - .name = "RGB/YUV Input",
> /* TODO: change this to vimc-input when it is implemented */
> - .drv = "vimc-sensor",
> + .name = "RGB/YUV Input",
> + .add = vimc_sen_add,
> + .rm = vimc_sen_rm,
> },
> {
> .name = "Scaler",
> - .drv = "vimc-scaler",
> + .add = vimc_sca_add,
> + .rm = vimc_sca_rm,
> },
> {
> .name = "RGB/YUV Capture",
> - .drv = "vimc-capture",
> + .add = vimc_cap_add,
> + .rm = vimc_cap_rm,
> },
> };
>
> @@ -127,7 +112,7 @@ static const struct vimc_ent_link ent_links[] = {
> VIMC_ENT_LINK(7, 1, 8, 0, MEDIA_LNK_FL_ENABLED | MEDIA_LNK_FL_IMMUTABLE),
> };
>
> -static const struct vimc_pipeline_config pipe_cfg = {
> +static struct vimc_pipeline_config pipe_cfg = {
> .ents = ent_config,
> .num_ents = ARRAY_SIZE(ent_config),
> .links = ent_links,
> @@ -144,14 +129,11 @@ static int vimc_create_links(struct vimc_device *vimc)
> /* Initialize the links between entities */
> for (i = 0; i < vimc->pipe_cfg->num_links; i++) {
> const struct vimc_ent_link *link = &vimc->pipe_cfg->links[i];
> - /*
> - * TODO: Check another way of retrieving ved struct without
> - * relying on platform_get_drvdata
> - */
> +
> struct vimc_ent_device *ved_src =
> - platform_get_drvdata(vimc->subdevs[link->src_ent]);
> + vimc->pipe_cfg->ents[link->src_ent].ved;
> struct vimc_ent_device *ved_sink =
> - platform_get_drvdata(vimc->subdevs[link->sink_ent]);
> + vimc->pipe_cfg->ents[link->sink_ent].ved;
>
> ret = media_create_pad_link(ved_src->ent, link->src_pad,
> ved_sink->ent, link->sink_pad,
> @@ -163,13 +145,28 @@ static int vimc_create_links(struct vimc_device *vimc)
> return 0;
> }
>
> -static int vimc_comp_bind(struct device *master)
> +static int vimc_add_subdevs(struct vimc_device *vimc)
> {
> - struct vimc_device *vimc = container_of(to_platform_device(master),
> - struct vimc_device, pdev);
> + unsigned int i;
> int ret;
>
> - dev_dbg(master, "bind");
> + for (i = 0; i < vimc->pipe_cfg->num_ents; i++) {
> + dev_dbg(&vimc->pdev.dev, "new entity for %s\n",
> + vimc->pipe_cfg->ents[i].name);
> + ret = vimc->pipe_cfg->ents[i].add(vimc,
> + &vimc->pipe_cfg->ents[i]);
> + if (ret) {
> + dev_err(&vimc->pdev.dev, "add new entity for %s\n",
> + vimc->pipe_cfg->ents[i].name);
> + return ret;
> + }
If this fails, I think we should remove the subdevs that were added.
> + }
> + return 0;
> +}
> +
> +static int vimc_register_devices(struct vimc_device *vimc)
> +{
> + int ret;
>
> /* Register the v4l2 struct */
> ret = v4l2_device_register(vimc->mdev.dev, &vimc->v4l2_dev);
> @@ -179,22 +176,20 @@ static int vimc_comp_bind(struct device *master)
> return ret;
> }
>
> - /* Bind subdevices */
> - ret = component_bind_all(master, &vimc->v4l2_dev);
> - if (ret)
> - goto err_v4l2_unregister;
> + /* Invoke entity config hooks to initialize and register subdevs */
> + vimc_add_subdevs(vimc);
The return value should be checked here as well.
>
> /* Initialize links */
> ret = vimc_create_links(vimc);
> if (ret)
> - goto err_comp_unbind_all;
> + goto err_v4l2_unregister;
>
> /* Register the media device */
> ret = media_device_register(&vimc->mdev);
> if (ret) {
> dev_err(vimc->mdev.dev,
> "media device register failed (err=%d)\n", ret);
> - goto err_comp_unbind_all;
> + goto err_v4l2_unregister;
> }
>
> /* Expose all subdev's nodes*/
> @@ -211,98 +206,36 @@ static int vimc_comp_bind(struct device *master)
> err_mdev_unregister:
> media_device_unregister(&vimc->mdev);
> media_device_cleanup(&vimc->mdev);
> -err_comp_unbind_all:
> - component_unbind_all(master, NULL);
> err_v4l2_unregister:
> v4l2_device_unregister(&vimc->v4l2_dev);
>
> return ret;
> }
>
> -static void vimc_comp_unbind(struct device *master)
> +static void vimc_unregister(struct vimc_device *vimc)
> {
> - struct vimc_device *vimc = container_of(to_platform_device(master),
> - struct vimc_device, pdev);
> -
> - dev_dbg(master, "unbind");
> -
> media_device_unregister(&vimc->mdev);
> media_device_cleanup(&vimc->mdev);
> - component_unbind_all(master, NULL);
> v4l2_device_unregister(&vimc->v4l2_dev);
> }
>
> -static int vimc_comp_compare(struct device *comp, void *data)
> -{
> - return comp == data;
> -}
> -
> -static struct component_match *vimc_add_subdevs(struct vimc_device *vimc)
> -{
> - struct component_match *match = NULL;
> - struct vimc_platform_data pdata;
> - int i;
> -
> - for (i = 0; i < vimc->pipe_cfg->num_ents; i++) {
> - dev_dbg(&vimc->pdev.dev, "new pdev for %s\n",
> - vimc->pipe_cfg->ents[i].drv);
> -
> - strscpy(pdata.entity_name, vimc->pipe_cfg->ents[i].name,
> - sizeof(pdata.entity_name));
> -
> - vimc->subdevs[i] = platform_device_register_data(&vimc->pdev.dev,
> - vimc->pipe_cfg->ents[i].drv,
> - PLATFORM_DEVID_AUTO,
> - &pdata,
> - sizeof(pdata));
> - if (IS_ERR(vimc->subdevs[i])) {
> - match = ERR_CAST(vimc->subdevs[i]);
> - while (--i >= 0)
> - platform_device_unregister(vimc->subdevs[i]);
> -
> - return match;
> - }
> -
> - component_match_add(&vimc->pdev.dev, &match, vimc_comp_compare,
> - &vimc->subdevs[i]->dev);
> - }
> -
> - return match;
> -}
> -
> static void vimc_rm_subdevs(struct vimc_device *vimc)
> {
> unsigned int i;
>
> for (i = 0; i < vimc->pipe_cfg->num_ents; i++)
> - platform_device_unregister(vimc->subdevs[i]);
> + vimc->pipe_cfg->ents[i].rm(vimc, &vimc->pipe_cfg->ents[i]);
> }
>
> -static const struct component_master_ops vimc_comp_ops = {
> - .bind = vimc_comp_bind,
> - .unbind = vimc_comp_unbind,
> -};
> -
> static int vimc_probe(struct platform_device *pdev)
> {
> struct vimc_device *vimc = container_of(pdev, struct vimc_device, pdev);
> - struct component_match *match = NULL;
> - int ret;
> + int ret = 0;
no need to init to zero
>
> dev_dbg(&pdev->dev, "probe");
>
> memset(&vimc->mdev, 0, sizeof(vimc->mdev));
>
> - /* Create platform_device for each entity in the topology*/
> - vimc->subdevs = devm_kcalloc(&vimc->pdev.dev, vimc->pipe_cfg->num_ents,
> - sizeof(*vimc->subdevs), GFP_KERNEL);
> - if (!vimc->subdevs)
> - return -ENOMEM;
> -
> - match = vimc_add_subdevs(vimc);
> - if (IS_ERR(match))
> - return PTR_ERR(match);
> -
> /* Link the media device within the v4l2_device */
> vimc->v4l2_dev.mdev = &vimc->mdev;
>
> @@ -314,16 +247,11 @@ static int vimc_probe(struct platform_device *pdev)
> vimc->mdev.dev = &pdev->dev;
> media_device_init(&vimc->mdev);
>
> - /* Add self to the component system */
> - ret = component_master_add_with_match(&pdev->dev, &vimc_comp_ops,
> - match);
> - if (ret) {
> + ret = vimc_register_devices(vimc);
> + if (ret)
> media_device_cleanup(&vimc->mdev);
> - vimc_rm_subdevs(vimc);
> - return ret;
> - }
>
> - return 0;
> + return ret;
I would leave the return 0 make it clear this is the success case.
Thanks
Helen
> }
>
> static int vimc_remove(struct platform_device *pdev)
> @@ -332,8 +260,8 @@ static int vimc_remove(struct platform_device *pdev)
>
> dev_dbg(&pdev->dev, "remove");
>
> - component_master_del(&pdev->dev, &vimc_comp_ops);
> vimc_rm_subdevs(vimc);
> + vimc_unregister(vimc);
>
> return 0;
> }
> diff --git a/drivers/media/platform/vimc/vimc-debayer.c b/drivers/media/platform/vimc/vimc-debayer.c
> index 00598fbf3cba..3b4e73c10a03 100644
> --- a/drivers/media/platform/vimc/vimc-debayer.c
> +++ b/drivers/media/platform/vimc/vimc-debayer.c
> @@ -5,19 +5,14 @@
> * Copyright (C) 2015-2017 Helen Koike <[email protected]>
> */
>
> -#include <linux/component.h>
> #include <linux/module.h>
> -#include <linux/mod_devicetable.h>
> -#include <linux/platform_device.h>
> #include <linux/vmalloc.h>
> #include <linux/v4l2-mediabus.h>
> #include <media/v4l2-subdev.h>
>
> #include "vimc-common.h"
>
> -#define VIMC_DEB_DRV_NAME "vimc-debayer"
> -/* This module only supports transforming a bayer format
> - * to V4L2_PIX_FMT_RGB24
> +/* Supports transforming a bayer format to V4L2_PIX_FMT_RGB24
> */
> #define VIMC_DEB_SRC_PIXFMT V4L2_PIX_FMT_RGB24
> #define VIMC_DEB_SRC_MBUS_FMT_DEFAULT MEDIA_BUS_FMT_RGB888_1X24
> @@ -513,21 +508,19 @@ static const struct v4l2_subdev_internal_ops vimc_deb_int_ops = {
> .release = vimc_deb_release,
> };
>
> -static void vimc_deb_comp_unbind(struct device *comp, struct device *master,
> - void *master_data)
> +void vimc_deb_rm(struct vimc_device *vimc, struct vimc_ent_config *vent)
> {
> - struct vimc_ent_device *ved = dev_get_drvdata(comp);
> - struct vimc_deb_device *vdeb = container_of(ved, struct vimc_deb_device,
> + struct vimc_ent_device *ved = vent->ved;
> + struct vimc_deb_device *vdeb = container_of(ved,
> + struct vimc_deb_device,
> ved);
>
> vimc_ent_sd_unregister(ved, &vdeb->sd);
> }
>
> -static int vimc_deb_comp_bind(struct device *comp, struct device *master,
> - void *master_data)
> +int vimc_deb_add(struct vimc_device *vimc, struct vimc_ent_config *vent)
> {
> - struct v4l2_device *v4l2_dev = master_data;
> - struct vimc_platform_data *pdata = comp->platform_data;
> + struct v4l2_device *v4l2_dev = &vimc->v4l2_dev;
> struct vimc_deb_device *vdeb;
> int ret;
>
> @@ -538,7 +531,7 @@ static int vimc_deb_comp_bind(struct device *comp, struct device *master,
>
> /* Initialize ved and sd */
> ret = vimc_ent_sd_register(&vdeb->ved, &vdeb->sd, v4l2_dev,
> - pdata->entity_name,
> + vent->name,
> MEDIA_ENT_F_PROC_VIDEO_PIXEL_ENC_CONV, 2,
> (const unsigned long[2]) {MEDIA_PAD_FL_SINK,
> MEDIA_PAD_FL_SOURCE},
> @@ -549,8 +542,7 @@ static int vimc_deb_comp_bind(struct device *comp, struct device *master,
> }
>
> vdeb->ved.process_frame = vimc_deb_process_frame;
> - dev_set_drvdata(comp, &vdeb->ved);
> - vdeb->dev = comp;
> + vdeb->dev = &vimc->pdev.dev;
>
> /* Initialize the frame format */
> vdeb->sink_fmt = sink_fmt_default;
> @@ -563,46 +555,6 @@ static int vimc_deb_comp_bind(struct device *comp, struct device *master,
> */
> vdeb->set_rgb_src = vimc_deb_set_rgb_pix_rgb24;
>
> + vent->ved = &vdeb->ved;
> return 0;
> }
> -
> -static const struct component_ops vimc_deb_comp_ops = {
> - .bind = vimc_deb_comp_bind,
> - .unbind = vimc_deb_comp_unbind,
> -};
> -
> -static int vimc_deb_probe(struct platform_device *pdev)
> -{
> - return component_add(&pdev->dev, &vimc_deb_comp_ops);
> -}
> -
> -static int vimc_deb_remove(struct platform_device *pdev)
> -{
> - component_del(&pdev->dev, &vimc_deb_comp_ops);
> -
> - return 0;
> -}
> -
> -static const struct platform_device_id vimc_deb_driver_ids[] = {
> - {
> - .name = VIMC_DEB_DRV_NAME,
> - },
> - { }
> -};
> -
> -static struct platform_driver vimc_deb_pdrv = {
> - .probe = vimc_deb_probe,
> - .remove = vimc_deb_remove,
> - .id_table = vimc_deb_driver_ids,
> - .driver = {
> - .name = VIMC_DEB_DRV_NAME,
> - },
> -};
> -
> -module_platform_driver(vimc_deb_pdrv);
> -
> -MODULE_DEVICE_TABLE(platform, vimc_deb_driver_ids);
> -
> -MODULE_DESCRIPTION("Virtual Media Controller Driver (VIMC) Debayer");
> -MODULE_AUTHOR("Helen Mae Koike Fornazier <[email protected]>");
> -MODULE_LICENSE("GPL");
> diff --git a/drivers/media/platform/vimc/vimc-scaler.c b/drivers/media/platform/vimc/vimc-scaler.c
> index c7123a45c55b..cb5eb42de69d 100644
> --- a/drivers/media/platform/vimc/vimc-scaler.c
> +++ b/drivers/media/platform/vimc/vimc-scaler.c
> @@ -5,18 +5,13 @@
> * Copyright (C) 2015-2017 Helen Koike <[email protected]>
> */
>
> -#include <linux/component.h>
> #include <linux/module.h>
> -#include <linux/mod_devicetable.h>
> -#include <linux/platform_device.h>
> #include <linux/vmalloc.h>
> #include <linux/v4l2-mediabus.h>
> #include <media/v4l2-subdev.h>
>
> #include "vimc-common.h"
>
> -#define VIMC_SCA_DRV_NAME "vimc-scaler"
> -
> static unsigned int sca_mult = 3;
> module_param(sca_mult, uint, 0000);
> MODULE_PARM_DESC(sca_mult, " the image size multiplier");
> @@ -344,22 +339,21 @@ static const struct v4l2_subdev_internal_ops vimc_sca_int_ops = {
> .release = vimc_sca_release,
> };
>
> -static void vimc_sca_comp_unbind(struct device *comp, struct device *master,
> - void *master_data)
> +void vimc_sca_rm(struct vimc_device *vimc, struct vimc_ent_config *vent)
> {
> - struct vimc_ent_device *ved = dev_get_drvdata(comp);
> - struct vimc_sca_device *vsca = container_of(ved, struct vimc_sca_device,
> + struct vimc_ent_device *ved = vent->ved;
> + struct vimc_sca_device *vsca = container_of(ved,
> + struct vimc_sca_device,
> ved);
>
> +
> vimc_ent_sd_unregister(ved, &vsca->sd);
> }
>
>
> -static int vimc_sca_comp_bind(struct device *comp, struct device *master,
> - void *master_data)
> +int vimc_sca_add(struct vimc_device *vimc, struct vimc_ent_config *vent)
> {
> - struct v4l2_device *v4l2_dev = master_data;
> - struct vimc_platform_data *pdata = comp->platform_data;
> + struct v4l2_device *v4l2_dev = &vimc->v4l2_dev;
> struct vimc_sca_device *vsca;
> int ret;
>
> @@ -370,7 +364,7 @@ static int vimc_sca_comp_bind(struct device *comp, struct device *master,
>
> /* Initialize ved and sd */
> ret = vimc_ent_sd_register(&vsca->ved, &vsca->sd, v4l2_dev,
> - pdata->entity_name,
> + vent->name,
> MEDIA_ENT_F_PROC_VIDEO_SCALER, 2,
> (const unsigned long[2]) {MEDIA_PAD_FL_SINK,
> MEDIA_PAD_FL_SOURCE},
> @@ -381,52 +375,12 @@ static int vimc_sca_comp_bind(struct device *comp, struct device *master,
> }
>
> vsca->ved.process_frame = vimc_sca_process_frame;
> - dev_set_drvdata(comp, &vsca->ved);
> - vsca->dev = comp;
> + vsca->dev = &vimc->pdev.dev;
> +
> + vent->ved = &vsca->ved;
>
> /* Initialize the frame format */
> vsca->sink_fmt = sink_fmt_default;
>
> return 0;
> }
> -
> -static const struct component_ops vimc_sca_comp_ops = {
> - .bind = vimc_sca_comp_bind,
> - .unbind = vimc_sca_comp_unbind,
> -};
> -
> -static int vimc_sca_probe(struct platform_device *pdev)
> -{
> - return component_add(&pdev->dev, &vimc_sca_comp_ops);
> -}
> -
> -static int vimc_sca_remove(struct platform_device *pdev)
> -{
> - component_del(&pdev->dev, &vimc_sca_comp_ops);
> -
> - return 0;
> -}
> -
> -static const struct platform_device_id vimc_sca_driver_ids[] = {
> - {
> - .name = VIMC_SCA_DRV_NAME,
> - },
> - { }
> -};
> -
> -static struct platform_driver vimc_sca_pdrv = {
> - .probe = vimc_sca_probe,
> - .remove = vimc_sca_remove,
> - .id_table = vimc_sca_driver_ids,
> - .driver = {
> - .name = VIMC_SCA_DRV_NAME,
> - },
> -};
> -
> -module_platform_driver(vimc_sca_pdrv);
> -
> -MODULE_DEVICE_TABLE(platform, vimc_sca_driver_ids);
> -
> -MODULE_DESCRIPTION("Virtual Media Controller Driver (VIMC) Scaler");
> -MODULE_AUTHOR("Helen Mae Koike Fornazier <[email protected]>");
> -MODULE_LICENSE("GPL");
> diff --git a/drivers/media/platform/vimc/vimc-sensor.c b/drivers/media/platform/vimc/vimc-sensor.c
> index 51359472eef2..70b195b817a4 100644
> --- a/drivers/media/platform/vimc/vimc-sensor.c
> +++ b/drivers/media/platform/vimc/vimc-sensor.c
> @@ -5,10 +5,6 @@
> * Copyright (C) 2015-2017 Helen Koike <[email protected]>
> */
>
> -#include <linux/component.h>
> -#include <linux/module.h>
> -#include <linux/mod_devicetable.h>
> -#include <linux/platform_device.h>
> #include <linux/v4l2-mediabus.h>
> #include <linux/vmalloc.h>
> #include <media/v4l2-ctrls.h>
> @@ -18,8 +14,6 @@
>
> #include "vimc-common.h"
>
> -#define VIMC_SEN_DRV_NAME "vimc-sensor"
> -
> struct vimc_sen_device {
> struct vimc_ent_device ved;
> struct v4l2_subdev sd;
> @@ -279,12 +273,12 @@ static const struct v4l2_subdev_internal_ops vimc_sen_int_ops = {
> .release = vimc_sen_release,
> };
>
> -static void vimc_sen_comp_unbind(struct device *comp, struct device *master,
> - void *master_data)
> +void vimc_sen_rm(struct vimc_device *vimc, struct vimc_ent_config *vent)
> {
> - struct vimc_ent_device *ved = dev_get_drvdata(comp);
> - struct vimc_sen_device *vsen =
> - container_of(ved, struct vimc_sen_device, ved);
> + struct vimc_ent_device *ved = vent->ved;
> + struct vimc_sen_device *vsen = container_of(ved,
> + struct vimc_sen_device,
> + ved);
>
> vimc_ent_sd_unregister(ved, &vsen->sd);
> }
> @@ -306,11 +300,9 @@ static const struct v4l2_ctrl_config vimc_sen_ctrl_test_pattern = {
> .qmenu = tpg_pattern_strings,
> };
>
> -static int vimc_sen_comp_bind(struct device *comp, struct device *master,
> - void *master_data)
> +int vimc_sen_add(struct vimc_device *vimc, struct vimc_ent_config *vent)
> {
> - struct v4l2_device *v4l2_dev = master_data;
> - struct vimc_platform_data *pdata = comp->platform_data;
> + struct v4l2_device *v4l2_dev = &vimc->v4l2_dev;
> struct vimc_sen_device *vsen;
> int ret;
>
> @@ -343,7 +335,7 @@ static int vimc_sen_comp_bind(struct device *comp, struct device *master,
>
> /* Initialize ved and sd */
> ret = vimc_ent_sd_register(&vsen->ved, &vsen->sd, v4l2_dev,
> - pdata->entity_name,
> + vent->name,
> MEDIA_ENT_F_CAM_SENSOR, 1,
> (const unsigned long[1]) {MEDIA_PAD_FL_SOURCE},
> &vimc_sen_int_ops, &vimc_sen_ops);
> @@ -351,8 +343,7 @@ static int vimc_sen_comp_bind(struct device *comp, struct device *master,
> goto err_free_hdl;
>
> vsen->ved.process_frame = vimc_sen_process_frame;
> - dev_set_drvdata(comp, &vsen->ved);
> - vsen->dev = comp;
> + vsen->dev = &vimc->pdev.dev;
>
> /* Initialize the frame format */
> vsen->mbus_format = fmt_default;
> @@ -364,6 +355,7 @@ static int vimc_sen_comp_bind(struct device *comp, struct device *master,
> if (ret)
> goto err_unregister_ent_sd;
>
> + vent->ved = &vsen->ved;
> return 0;
>
> err_unregister_ent_sd:
> @@ -375,44 +367,3 @@ static int vimc_sen_comp_bind(struct device *comp, struct device *master,
>
> return ret;
> }
> -
> -static const struct component_ops vimc_sen_comp_ops = {
> - .bind = vimc_sen_comp_bind,
> - .unbind = vimc_sen_comp_unbind,
> -};
> -
> -static int vimc_sen_probe(struct platform_device *pdev)
> -{
> - return component_add(&pdev->dev, &vimc_sen_comp_ops);
> -}
> -
> -static int vimc_sen_remove(struct platform_device *pdev)
> -{
> - component_del(&pdev->dev, &vimc_sen_comp_ops);
> -
> - return 0;
> -}
> -
> -static const struct platform_device_id vimc_sen_driver_ids[] = {
> - {
> - .name = VIMC_SEN_DRV_NAME,
> - },
> - { }
> -};
> -
> -static struct platform_driver vimc_sen_pdrv = {
> - .probe = vimc_sen_probe,
> - .remove = vimc_sen_remove,
> - .id_table = vimc_sen_driver_ids,
> - .driver = {
> - .name = VIMC_SEN_DRV_NAME,
> - },
> -};
> -
> -module_platform_driver(vimc_sen_pdrv);
> -
> -MODULE_DEVICE_TABLE(platform, vimc_sen_driver_ids);
> -
> -MODULE_DESCRIPTION("Virtual Media Controller Driver (VIMC) Sensor");
> -MODULE_AUTHOR("Helen Mae Koike Fornazier <[email protected]>");
> -MODULE_LICENSE("GPL");
>
On 8/16/19 2:03 PM, Helen Koike wrote:
> Hi Shuah,
>
> Thanks for the patches.
>
> On 8/15/19 4:42 PM, Shuah Khan wrote:
>> vimc uses Component API to split the driver into functional components.
>> The real hardware resembles a monolith structure than component and
>> component structure added a level of complexity making it hard to
>> maintain without adding any real benefit.
>>
>> The sensor is one vimc component that would makes sense to be a separate
>> module to closely align with the real hardware. It would be easier to
>> collapse vimc into single monolithic driver first and then split the
>> sensor off as a separate module.
>>
>> This patch series removes the component API and makes minimal changes to
>> the code base preserving the functional division of the code structure.
>> Preserving the functional structure allows us to split the sensor off
>> as a separate module in the future.
>>
>> Major design elements in this change are:
>> - Use existing struct vimc_ent_config and struct vimc_pipeline_config
>> to drive the initialization of the functional components.
>> - Make vimc_device and vimc_ent_config global by moving them to
>> vimc-common.h
>> - Add two new hooks add and rm to initialize and register, unregister
>> and free subdevs.
>> - All component API is now gone and bind and unbind hooks are modified
>> to do "add" and "rm" with minimal changes to just add and rm subdevs.
>> - vimc-core's bind and unbind are now register and unregister.
>> - vimc-core invokes "add" hooks from its vimc_register_devices().
>> The "add" hooks remain the same and register subdevs. They don't
>> create platform devices of their own and use vimc's pdev.dev as
>> their reference device. The "add" hooks save their vimc_ent_device(s)
>> in the corresponding vimc_ent_config.
>> - vimc-core invokes "rm" hooks from its unregister to unregister
>> subdevs and cleanup.
>> - vimc-core invokes "add" and "rm" hooks with pointer to struct
>> vimc_device and the corresponding struct vimc_ent_config pointer.
>>
>> The following configure and stream test works on all devices.
>>
>> media-ctl -d platform:vimc -V '"Sensor A":0[fmt:SBGGR8_1X8/640x480]'
>> media-ctl -d platform:vimc -V '"Debayer A":0[fmt:SBGGR8_1X8/640x480]'
>> media-ctl -d platform:vimc -V '"Sensor B":0[fmt:SBGGR8_1X8/640x480]'
>> media-ctl -d platform:vimc -V '"Debayer B":0[fmt:SBGGR8_1X8/640x480]'
>>
>> v4l2-ctl -z platform:vimc -d "RGB/YUV Capture" -v width=1920,height=1440
>> v4l2-ctl -z platform:vimc -d "Raw Capture 0" -v pixelformat=BA81
>> v4l2-ctl -z platform:vimc -d "Raw Capture 1" -v pixelformat=BA81
>>
>> v4l2-ctl --stream-mmap --stream-count=100 -d /dev/video1
>> v4l2-ctl --stream-mmap --stream-count=100 -d /dev/video2
>> v4l2-ctl --stream-mmap --stream-count=100 -d /dev/video3
>>
>> The second patch in the series fixes a general protection fault found
>> when rmmod is done while stream is active.
>>
>> - rmmod while streaming returns vimc is in use
>> - rmmod without active stream works correctly
>>
>> Changes since v1:
>> Patch 1 & 2: (patch 1 in this series)
>> - Collapsed the two patches into one
>> - Added common defines (vimc_device and vimc_ent_config) to vimc-common.h
>> based on our discussion.
>> - Addressed review comments from Helen and Laurent
>> - Use vimc-common.h instead of creating a new file.
>> - Other minor comments from Helen on int vs. unsigned int and
>> not needing to initialize ret in vimc_add_subdevs()
>> Patch 3 (patch 2 in this series):
>> - The second patch is the fix for gpf. Updated the patch after looking
>> at the test results from Andre and Helen. This problem is in a common
>> code and impacts all subdevs. The fix addresses the core problem and
>> fixes it. Fix removes pads release from v4l2_device_unregister_subdev()
>> and pads are now released from the sd release handler with all other
>> resources.
>>
>> Outstanding:
>> - Update documentation with the correct topology.
>> - There is one outstanding gpf remaining in the unbind path. I will
>> fix that in a separate patch. This is an existing problem and will
>> be easier to fix on top of this patch series.
>>
>> vimc_print_dot (--print-dot) topology after this change: (no change
>> compared to media master)
>> digraph board {
>> rankdir=TB
>> n00000001 [label="{{} | Sensor A\n/dev/v4l-subdev0 | {<port0> 0}}", shape=Mrecord, style=filled, fillcolor=green]
>> n00000001:port0 -> n00000005:port0 [style=bold]
>> n00000001:port0 -> n0000000b [style=bold]
>> n00000003 [label="{{} | Sensor B\n/dev/v4l-subdev1 | {<port0> 0}}", shape=Mrecord, style=filled, fillcolor=green]
>> n00000003:port0 -> n00000008:port0 [style=bold]
>> n00000003:port0 -> n0000000f [style=bold]
>> n00000005 [label="{{<port0> 0} | Debayer A\n/dev/v4l-subdev2 | {<port1> 1}}", shape=Mrecord, style=filled, fillcolor=green]
>> n00000005:port1 -> n00000015:port0
>> n00000008 [label="{{<port0> 0} | Debayer B\n/dev/v4l-subdev3 | {<port1> 1}}", shape=Mrecord, style=filled, fillcolor=green]
>> n00000008:port1 -> n00000015:port0 [style=dashed]
>> n0000000b [label="Raw Capture 0\n/dev/video1", shape=box, style=filled, fillcolor=yellow]
>> n0000000f [label="Raw Capture 1\n/dev/video2", shape=box, style=filled, fillcolor=yellow]
>> n00000013 [label="{{} | RGB/YUV Input\n/dev/v4l-subdev4 | {<port0> 0}}", shape=Mrecord, style=filled, fillcolor=green]
>> n00000013:port0 -> n00000015:port0 [style=dashed]
>> n00000015 [label="{{<port0> 0} | Scaler\n/dev/v4l-subdev5 | {<port1> 1}}", shape=Mrecord, style=filled, fillcolor=green]
>> n00000015:port1 -> n00000018 [style=bold]
>> n00000018 [label="RGB/YUV Capture\n/dev/video3", shape=box, style=filled, fillcolor=yellow]
>>
>> Shuah Khan (2):
>> media: vimc: Collapse component structure into a single monolithic
>> driver
>> media: vimc: Fix gpf in rmmod path when stream is active
>
> I couldn't apply those on top of media/master, I think they are
> conflicting with the two "Reverts" commits in vimc.
>
Sorry for the delay. I was out backpacking for a couple of days.
I knew I have to rebase after the reverts go in. I will do that
and address your comments on patch 1/2 and resend the series.
Thanks for the review. Your comments on naming make sense.
thanks,
-- Shuah