2022-02-02 10:54:32

by Jia-Ju Bai

[permalink] [raw]
Subject: [BUG] net: smc: possible deadlock in smc_lgr_free() and smc_link_down_work()

Hello,

My static analysis tool reports a possible deadlock in the smc module in
Linux 5.16:

smc_lgr_free()
  mutex_lock(&lgr->llc_conf_mutex); --> Line 1289 (Lock A)
  smcr_link_clear()
    smc_wr_free_link()
      wait_event(lnk->wr_tx_wait, ...); --> Line 648 (Wait X)

smc_link_down_work()
  mutex_lock(&lgr->llc_conf_mutex); --> Line 1683 (Lock A)
  smcr_link_down()
    smcr_link_clear()
      smc_wr_free_link()
        smc_wr_wakeup_tx_wait()
          wake_up_all(&lnk->wr_tx_wait); --> Line 78 (Wake X)

When smc_lgr_free() is executed, "Wait X" is performed by holding "Lock
A". If smc_link_down_work() is executed at this time, "Wake X" cannot be
performed to wake up "Wait X" in smc_lgr_free(), because "Lock A" has
been already hold by smc_lgr_free(), causing a possible deadlock.

I am not quite sure whether this possible problem is real and how to fix
it if it is real.
Any feedback would be appreciated, thanks :)


Best wishes,
Jia-Ju Bai


2022-02-02 13:19:42

by Karsten Graul

[permalink] [raw]
Subject: Re: [BUG] net: smc: possible deadlock in smc_lgr_free() and smc_link_down_work()

On 01/02/2022 08:51, Jia-Ju Bai wrote:
> Hello,
>
> My static analysis tool reports a possible deadlock in the smc module in Linux 5.16:
>
> smc_lgr_free()
>   mutex_lock(&lgr->llc_conf_mutex); --> Line 1289 (Lock A)
>   smcr_link_clear()
>     smc_wr_free_link()
>       wait_event(lnk->wr_tx_wait, ...); --> Line 648 (Wait X)
>
> smc_link_down_work()
>   mutex_lock(&lgr->llc_conf_mutex); --> Line 1683 (Lock A)
>   smcr_link_down()
>     smcr_link_clear()
>       smc_wr_free_link()
>         smc_wr_wakeup_tx_wait()
>           wake_up_all(&lnk->wr_tx_wait); --> Line 78 (Wake X)
>
> When smc_lgr_free() is executed, "Wait X" is performed by holding "Lock A". If smc_link_down_work() is executed at this time, "Wake X" cannot be performed to wake up "Wait X" in smc_lgr_free(), because "Lock A" has been already hold by smc_lgr_free(), causing a possible deadlock.
>
> I am not quite sure whether this possible problem is real and how to fix it if it is real.
> Any feedback would be appreciated, thanks :)

A deeper analysis showed up that this reported possible deadlock is actually not a problem.

The wait on line 648 in smc_wr.c
wait_event(lnk->wr_tx_wait, (!atomic_read(&lnk->wr_tx_refcnt)));
waits as long as the refcount wr_tx_refcnt is not zero.

Every time when a caller stops using a link wr_tx_refcnt is decreased, and when it reaches
zero the wr_tx_wait is woken up in smc_wr_tx_link_put() in smc_wr.h, line 70:
if (atomic_dec_and_test(&link->wr_tx_refcnt))
wake_up_all(&link->wr_tx_wait);

Multiple callers of smc_wr_tx_link_put() do not run under the llc_conf_mutex lock, and those
who run under this mutex are saved against the wait_event() in smc_wr_free_link().


Thank you for reporting this finding! Which tool did you use for this analysis?

2022-02-02 13:40:54

by Karsten Graul

[permalink] [raw]
Subject: Re: [BUG] net: smc: possible deadlock in smc_lgr_free() and smc_link_down_work()

On 01/02/2022 08:51, Jia-Ju Bai wrote:
> Hello,
>
> My static analysis tool reports a possible deadlock in the smc module in Linux 5.16:
>
> smc_lgr_free()
>   mutex_lock(&lgr->llc_conf_mutex); --> Line 1289 (Lock A)
>   smcr_link_clear()
>     smc_wr_free_link()
>       wait_event(lnk->wr_tx_wait, ...); --> Line 648 (Wait X)
>
> smc_link_down_work()
>   mutex_lock(&lgr->llc_conf_mutex); --> Line 1683 (Lock A)
>   smcr_link_down()
>     smcr_link_clear()
>       smc_wr_free_link()
>         smc_wr_wakeup_tx_wait()
>           wake_up_all(&lnk->wr_tx_wait); --> Line 78 (Wake X)
>
> When smc_lgr_free() is executed, "Wait X" is performed by holding "Lock A". If smc_link_down_work() is executed at this time, "Wake X" cannot be performed to wake up "Wait X" in smc_lgr_free(), because "Lock A" has been already hold by smc_lgr_free(), causing a possible deadlock.
>

Thank you for your reporting and the good description!

We will look into this issue and get back to you in a few days.

2022-02-07 16:01:52

by Jia-Ju Bai

[permalink] [raw]
Subject: Re: [BUG] net: smc: possible deadlock in smc_lgr_free() and smc_link_down_work()



On 2022/2/2 1:06, Karsten Graul wrote:
> On 01/02/2022 08:51, Jia-Ju Bai wrote:
>> Hello,
>>
>> My static analysis tool reports a possible deadlock in the smc module in Linux 5.16:
>>
>> smc_lgr_free()
>>   mutex_lock(&lgr->llc_conf_mutex); --> Line 1289 (Lock A)
>>   smcr_link_clear()
>>     smc_wr_free_link()
>>       wait_event(lnk->wr_tx_wait, ...); --> Line 648 (Wait X)
>>
>> smc_link_down_work()
>>   mutex_lock(&lgr->llc_conf_mutex); --> Line 1683 (Lock A)
>>   smcr_link_down()
>>     smcr_link_clear()
>>       smc_wr_free_link()
>>         smc_wr_wakeup_tx_wait()
>>           wake_up_all(&lnk->wr_tx_wait); --> Line 78 (Wake X)
>>
>> When smc_lgr_free() is executed, "Wait X" is performed by holding "Lock A". If smc_link_down_work() is executed at this time, "Wake X" cannot be performed to wake up "Wait X" in smc_lgr_free(), because "Lock A" has been already hold by smc_lgr_free(), causing a possible deadlock.
>>
>> I am not quite sure whether this possible problem is real and how to fix it if it is real.
>> Any feedback would be appreciated, thanks :)

Hi Karsten,

Thanks for the reply and explanation :)

> A deeper analysis showed up that this reported possible deadlock is actually not a problem.
>
> The wait on line 648 in smc_wr.c
> wait_event(lnk->wr_tx_wait, (!atomic_read(&lnk->wr_tx_refcnt)));
> waits as long as the refcount wr_tx_refcnt is not zero.
>
> Every time when a caller stops using a link wr_tx_refcnt is decreased, and when it reaches
> zero the wr_tx_wait is woken up in smc_wr_tx_link_put() in smc_wr.h, line 70:
> if (atomic_dec_and_test(&link->wr_tx_refcnt))
> wake_up_all(&link->wr_tx_wait);

Okay, you mean that wake_up_all(&link->wr_tx_wait) in
smc_wr_tx_link_put() is used to wake up wait_event() in smc_wr_free_link().
But I wonder whether wake_up_all(&lnk->wr_tx_wait) in
smc_wr_wakeup_tx_wait() can wake up this wait_event()?
If so, my report is in this case.

> Multiple callers of smc_wr_tx_link_put() do not run under the llc_conf_mutex lock, and those
> who run under this mutex are saved against the wait_event() in smc_wr_free_link().

In fact, my tool also reports some other possible deadlocks invovling
smc_wr_tx_link_put(), which can be called by holding llc_conf_mutex.
There are three examples:

#BUG 1
smc_lgr_free()
  mutex_lock(&lgr->llc_conf_mutex); --> Line 1289 (Lock A)
  smcr_link_clear()
    smc_wr_free_link()
      wait_event(lnk->wr_tx_wait, ...); --> Line 648 (Wait X)

smcr_buf_unuse()
  mutex_lock(&lgr->llc_conf_mutex); --> Line 1087 (Lock A)
  smc_llc_do_delete_rkey()
    smc_llc_send_delete_rkey()
      smc_wr_tx_link_put()
        wake_up_all(&link->wr_tx_wait); --> Line 73 (Wake X)

#BUG 2
smc_lgr_free()
  mutex_lock(&lgr->llc_conf_mutex); --> Line 1289 (Lock A)
  smcr_link_clear()
    smc_wr_free_link()
      wait_event(lnk->wr_tx_wait, ...); --> Line 648 (Wait X)

smc_link_down_work()
  mutex_lock(&lgr->llc_conf_mutex); --> Line 1683 (Lock A)
  smcr_link_down()
    smc_llc_send_delete_link()
      smc_wr_tx_link_put()
        wake_up_all(&link->wr_tx_wait); --> Line 73 (Wake X)

#BUG 3
smc_llc_process_cli_delete_link()
  mutex_lock(&lgr->llc_conf_mutex); --> Line 1578 (Lock A)
  smc_llc_send_message()
    smc_llc_add_pending_send()
      smc_wr_tx_get_free_slot()
        wait_event_interruptible_timeout(link->wr_tx_wait, ...); -->
Line 219 (Wake X)

smc_llc_process_cli_add_link()
  mutex_lock(&lgr->llc_conf_mutex); --> Line 1198 (Lock A)
  smc_llc_cli_add_link_invite()
    smc_llc_send_add_link()
      smc_wr_tx_link_put()
        wake_up_all(&link->wr_tx_wait); --> Line 73 (Wake X)

I am not quite sure whether these possible problems are real.
Any feedback would be appreciated, thanks :)

>
> Thank you for reporting this finding! Which tool did you use for this analysis?

Thanks for your interest :)
I have implemented a static analysis tool based on LLVM, to detect
deadlocks caused by locking cycles and improper waiting/waking operations.
However, this tool still reports some false positives, and thus I am
still improving the accuracy of this tool.
Suggestions on deadlock detection (especially new/infrequent patterns
causing deadlocks) or the tool are welcome ;)


Best wishes,
Jia-Ju Bai


2022-02-09 08:19:59

by Karsten Graul

[permalink] [raw]
Subject: Re: [BUG] net: smc: possible deadlock in smc_lgr_free() and smc_link_down_work()

On 06/02/2022 16:09, Jia-Ju Bai wrote:
>
>
> On 2022/2/2 1:06, Karsten Graul wrote:
>> On 01/02/2022 08:51, Jia-Ju Bai wrote:
>>> Hello,
>>>
>>> My static analysis tool reports a possible deadlock in the smc module in Linux 5.16:
>>>
>>> smc_lgr_free()
>>>    mutex_lock(&lgr->llc_conf_mutex); --> Line 1289 (Lock A)
>>>    smcr_link_clear()
>>>      smc_wr_free_link()
>>>        wait_event(lnk->wr_tx_wait, ...); --> Line 648 (Wait X)
>>>
>>> smc_link_down_work()
>>>    mutex_lock(&lgr->llc_conf_mutex); --> Line 1683 (Lock A)
>>>    smcr_link_down()
>>>      smcr_link_clear()
>>>        smc_wr_free_link()
>>>          smc_wr_wakeup_tx_wait()
>>>            wake_up_all(&lnk->wr_tx_wait); --> Line 78 (Wake X)
>>>
>>> When smc_lgr_free() is executed, "Wait X" is performed by holding "Lock A". If smc_link_down_work() is executed at this time, "Wake X" cannot be performed to wake up "Wait X" in smc_lgr_free(), because "Lock A" has been already hold by smc_lgr_free(), causing a possible deadlock.
>>>
>>> I am not quite sure whether this possible problem is real and how to fix it if it is real.
>>> Any feedback would be appreciated, thanks :)
>
> Hi Karsten,
>
> Thanks for the reply and explanation :)
>
>> A deeper analysis showed up that this reported possible deadlock is actually not a problem.
>>
>> The wait on line 648 in smc_wr.c
>>     wait_event(lnk->wr_tx_wait, (!atomic_read(&lnk->wr_tx_refcnt)));
>> waits as long as the refcount wr_tx_refcnt is not zero.
>>
>> Every time when a caller stops using a link wr_tx_refcnt is decreased, and when it reaches
>> zero the wr_tx_wait is woken up in smc_wr_tx_link_put() in smc_wr.h, line 70:
>>         if (atomic_dec_and_test(&link->wr_tx_refcnt))
>>             wake_up_all(&link->wr_tx_wait);
>
> Okay, you mean that wake_up_all(&link->wr_tx_wait) in smc_wr_tx_link_put() is used to wake up wait_event() in smc_wr_free_link().
> But I wonder whether wake_up_all(&lnk->wr_tx_wait) in smc_wr_wakeup_tx_wait() can wake up this wait_event()?
> If so, my report is in this case.
>

Nope, due to the link state handling there is no current caller of smc_wr_wakeup_tx_wait() when
smc_wr_free_link() starts to wait for the link to become free. First the link state is set to DOWN,
then all waiters are woken up (and no one will start a new wait) and finally smc_wr_free_link()
"re-uses" the wait queue entry to wait for the link to become free.

I think its that reusing of the wait queue entry that confuses the tool.

>> Multiple callers of smc_wr_tx_link_put() do not run under the llc_conf_mutex lock, and those
>> who run under this mutex are saved against the wait_event() in smc_wr_free_link().
>
> In fact, my tool also reports some other possible deadlocks invovling smc_wr_tx_link_put(), which can be called by holding llc_conf_mutex.
> There are three examples:
>
> #BUG 1
> smc_lgr_free()
>   mutex_lock(&lgr->llc_conf_mutex); --> Line 1289 (Lock A)
>   smcr_link_clear()
>     smc_wr_free_link()
>       wait_event(lnk->wr_tx_wait, ...); --> Line 648 (Wait X)
>
> smcr_buf_unuse()
>   mutex_lock(&lgr->llc_conf_mutex); --> Line 1087 (Lock A)
>   smc_llc_do_delete_rkey()
>     smc_llc_send_delete_rkey()
>       smc_wr_tx_link_put()
>         wake_up_all(&link->wr_tx_wait); --> Line 73 (Wake X)
>
> #BUG 2
> smc_lgr_free()
>   mutex_lock(&lgr->llc_conf_mutex); --> Line 1289 (Lock A)
>   smcr_link_clear()
>     smc_wr_free_link()
>       wait_event(lnk->wr_tx_wait, ...); --> Line 648 (Wait X)
>
> smc_link_down_work()
>   mutex_lock(&lgr->llc_conf_mutex); --> Line 1683 (Lock A)
>   smcr_link_down()
>     smc_llc_send_delete_link()
>       smc_wr_tx_link_put()
>         wake_up_all(&link->wr_tx_wait); --> Line 73 (Wake X)
>
> #BUG 3
> smc_llc_process_cli_delete_link()
>   mutex_lock(&lgr->llc_conf_mutex); --> Line 1578 (Lock A)
>   smc_llc_send_message()
>     smc_llc_add_pending_send()
>       smc_wr_tx_get_free_slot()
>         wait_event_interruptible_timeout(link->wr_tx_wait, ...); --> Line 219 (Wake X)
>
> smc_llc_process_cli_add_link()
>   mutex_lock(&lgr->llc_conf_mutex); --> Line 1198 (Lock A)
>   smc_llc_cli_add_link_invite()
>     smc_llc_send_add_link()
>       smc_wr_tx_link_put()
>         wake_up_all(&link->wr_tx_wait); --> Line 73 (Wake X)
>
> I am not quite sure whether these possible problems are real.
> Any feedback would be appreciated, thanks :)

Same here, because the wait queue entry is used in two scenarios and some processing separates
those scenarios, the code checker finds problems that 'should' never happen.

I wonder if it would be acceptable to introduce an extra wait queue entry only for the processing in
smc_wr_free_link(), I reused an existing one to save some memory... but a cleaner code also counts.
Not sure what to prefer.

>
>>
>> Thank you for reporting this finding! Which tool did you use for this analysis?
>
> Thanks for your interest :)
> I have implemented a static analysis tool based on LLVM, to detect deadlocks caused by locking cycles and improper waiting/waking operations.
> However, this tool still reports some false positives, and thus I am still improving the accuracy of this tool.
> Suggestions on deadlock detection (especially new/infrequent patterns causing deadlocks) or the tool are welcome ;)
>
>
> Best wishes,
> Jia-Ju Bai
>

--
Karsten