The binding dictates using 3 pwm-cells. Adhere to that.
This fixes the following dtbs_check warnings:
arch/arm/boot/dts/nxp/imx/imx6dl-savageboard.dtb: pwm@2080000: #pwm-cells:0:0: 3 was expected
from schema : http://devicetree.org/schemas/pwm/imx-pwm.yaml#
arch/arm/boot/dts/nxp/imx/imx6q-savageboard.dtb: pwm@2080000: #pwm-cells:0:0: 3 was expected
from schema : http://devicetree.org/schemas/pwm/imx-pwm.yaml#
Signed-off-by: Uwe Kleine-König <[email protected]>
---
arch/arm/boot/dts/nxp/imx/imx6qdl-savageboard.dtsi | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-savageboard.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-savageboard.dtsi
index 02e6d36e85fa..6823a639ed2f 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6qdl-savageboard.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-savageboard.dtsi
@@ -83,7 +83,7 @@ panel_bl: backlight {
brightness-levels = <0 4 8 16 32 64 128 255>;
default-brightness-level = <4>;
power-supply = <®_3p3v>;
- pwms = <&pwm1 0 10000>;
+ pwms = <&pwm1 0 10000 0>;
};
reg_3p3v: regulator-3p3v {
@@ -140,7 +140,6 @@ lvds0_out: endpoint {
};
&pwm1 {
- #pwm-cells = <2>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pwm1>;
status = "okay";
--
2.43.0