This patch adds a new property (power-supply) to panel rm68200 (raydium)
on stm32mp157c-ev1.
Signed-off-by: Yannick Fertré <[email protected]>
---
arch/arm/boot/dts/stm32mp157c-ev1.dts | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm/boot/dts/stm32mp157c-ev1.dts b/arch/arm/boot/dts/stm32mp157c-ev1.dts
index 8ef2cb0..50f3263 100644
--- a/arch/arm/boot/dts/stm32mp157c-ev1.dts
+++ b/arch/arm/boot/dts/stm32mp157c-ev1.dts
@@ -127,6 +127,7 @@
reg = <0>;
reset-gpios = <&gpiof 15 GPIO_ACTIVE_LOW>;
backlight = <&panel_backlight>;
+ power-supply = <&v3v3>;
status = "okay";
port {
--
2.7.4
Hi Yannick
On 5/21/19 5:03 PM, Yannick Fertré wrote:
> This patch adds a new property (power-supply) to panel rm68200 (raydium)
> on stm32mp157c-ev1.
>
> Signed-off-by: Yannick Fertré <[email protected]>
> ---
> arch/arm/boot/dts/stm32mp157c-ev1.dts | 1 +
> 1 file changed, 1 insertion(+)
>
> diff --git a/arch/arm/boot/dts/stm32mp157c-ev1.dts b/arch/arm/boot/dts/stm32mp157c-ev1.dts
> index 8ef2cb0..50f3263 100644
> --- a/arch/arm/boot/dts/stm32mp157c-ev1.dts
> +++ b/arch/arm/boot/dts/stm32mp157c-ev1.dts
> @@ -127,6 +127,7 @@
> reg = <0>;
> reset-gpios = <&gpiof 15 GPIO_ACTIVE_LOW>;
> backlight = <&panel_backlight>;
> + power-supply = <&v3v3>;
> status = "okay";
>
> port {
>
Applied on stm32-next.
Thanks.
Alex