SH7751R internal peripherals device tree.
Signed-off-by: Yoshinori Sato <[email protected]>
---
arch/sh/boot/dts/sh7751r.dtsi | 105 ++++++++++++++++++++++++++++++++++
1 file changed, 105 insertions(+)
create mode 100644 arch/sh/boot/dts/sh7751r.dtsi
diff --git a/arch/sh/boot/dts/sh7751r.dtsi b/arch/sh/boot/dts/sh7751r.dtsi
new file mode 100644
index 000000000000..61b2af5bebde
--- /dev/null
+++ b/arch/sh/boot/dts/sh7751r.dtsi
@@ -0,0 +1,105 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the SH7751R SoC
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/clock/sh7750-cpg.h>
+
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@0 {
+ compatible = "renesas,sh4", "renesas,sh2";
+ device_type = "cpu";
+ reg = <0>;
+ clocks = <&cpg SH7750_CPG_ICK>;
+ clock-names = "ick";
+ icache-size = <16384>;
+ icache-line-size = <32>;
+ dcache-size = <32768>;
+ dcache-line-size = <32>;
+ };
+ };
+
+ extal: oscillator {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <0>;
+ clock-output-names = "extal";
+ };
+
+ soc {
+ compatible = "simple-bus";
+ interrupt-parent = <&shintc>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ cpg: clock-controller@ffc00000 {
+ #clock-cells = <1>;
+ #power-domain-cells = <0>;
+ compatible = "renesas,sh7751r-cpg";
+ clocks = <&extal>;
+ clock-names = "extal";
+ reg = <0xffc00000 20>, <0xfe0a0000 16>;
+ reg-names = "FRQCR", "CLKSTP00";
+ renesas,mode = <0>;
+ };
+
+ shintc: interrupt-controller@ffd00000 {
+ compatible = "renesas,sh7751-intc";
+ #interrupt-cells = <1>;
+ interrupt-controller;
+ reg = <0xffd00000 20>, <0xfe080000 128>;
+ reg-names = "ICR", "INTPRI00";
+ };
+
+ /* sci0 is rarely used, so it is not defined here. */
+ scif1: serial@ffe80000 {
+ compatible = "renesas,scif-sh7751", "renesas,scif";
+ reg = <0xffe80000 0x100>;
+ interrupts = <0x700>,
+ <0x720>,
+ <0x760>,
+ <0x740>;
+ interrupt-names = "eri", "rxi", "txi", "bri";
+ clocks = <&cpg SH7750_MSTP_SCIF>;
+ clock-names = "fck";
+ power-domains = <&cpg>;
+ status = "disabled";
+ };
+
+ /* Normally ch0 and ch1 are used, so we will define ch0 to ch2 here. */
+ tmu0: timer@ffd80000 {
+ compatible = "renesas,tmu-sh7750", "renesas,tmu";
+ reg = <0xffd80000 12>;
+ interrupts = <0x400>,
+ <0x420>,
+ <0x440>,
+ <0x460>;
+ interrupt-names = "tuni0", "tuni1", "tuni2", "ticpi2";
+ clocks = <&cpg SH7750_MSTP_TMU012>;
+ clock-names = "fck";
+ power-domains = <&cpg>;
+ #renesas,channels = <3>;
+ };
+
+ pcic: pci@fe200000 {
+ compatible = "renesas,sh7751-pci";
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ device_type = "pci";
+ bus-range = <0 0>;
+ reg = <0xfe200000 0x0400>,
+ <0xff800000 0x0100>;
+ status = "disabled";
+ };
+ };
+};
--
2.39.2