Enable the xhci plat runtime PM for parent device to suspend/resume xhci.
Also call pm_runtime_get_noresume() in probe() function in case the parent
device doesn't call suspend/resume callback by runtime PM now.
Signed-off-by: Baolin Wang <[email protected]>
---
Changes since v2:
- Add pm_runtime_get_noresume() in probe() function.
- Add pm_runtime_set_suspended()/pm_runtime_put_noidle() in remove() function.
Changes since v1:
- No updates.
---
drivers/usb/host/xhci-plat.c | 41 ++++++++++++++++++++++++++++++++++++-----
1 file changed, 36 insertions(+), 5 deletions(-)
diff --git a/drivers/usb/host/xhci-plat.c b/drivers/usb/host/xhci-plat.c
index ed56bf9..f174502 100644
--- a/drivers/usb/host/xhci-plat.c
+++ b/drivers/usb/host/xhci-plat.c
@@ -246,6 +246,10 @@ static int xhci_plat_probe(struct platform_device *pdev)
if (ret)
goto dealloc_usb2_hcd;
+ pm_runtime_get_noresume(&pdev->dev);
+ pm_runtime_set_active(&pdev->dev);
+ pm_runtime_enable(&pdev->dev);
+
return 0;
@@ -274,6 +278,10 @@ static int xhci_plat_remove(struct platform_device *dev)
struct xhci_hcd *xhci = hcd_to_xhci(hcd);
struct clk *clk = xhci->clk;
+ pm_runtime_set_suspended(&pdev->dev);
+ pm_runtime_put_noidle(&pdev->dev);
+ pm_runtime_disable(&dev->dev);
+
usb_remove_hcd(xhci->shared_hcd);
usb_phy_shutdown(hcd->usb_phy);
@@ -311,14 +319,37 @@ static int xhci_plat_resume(struct device *dev)
return xhci_resume(xhci, 0);
}
+#endif /* CONFIG_PM_SLEEP */
+
+#ifdef CONFIG_PM
+static int xhci_plat_runtime_suspend(struct device *dev)
+{
+ struct usb_hcd *hcd = dev_get_drvdata(dev);
+ struct xhci_hcd *xhci = hcd_to_xhci(hcd);
+
+ return xhci_suspend(xhci, device_may_wakeup(dev));
+}
+
+static int xhci_plat_runtime_resume(struct device *dev)
+{
+ struct usb_hcd *hcd = dev_get_drvdata(dev);
+ struct xhci_hcd *xhci = hcd_to_xhci(hcd);
+
+ return xhci_resume(xhci, 0);
+}
+
+static int xhci_plat_runtime_idle(struct device *dev)
+{
+ return 0;
+}
+#endif /* CONFIG_PM */
static const struct dev_pm_ops xhci_plat_pm_ops = {
SET_SYSTEM_SLEEP_PM_OPS(xhci_plat_suspend, xhci_plat_resume)
+
+ SET_RUNTIME_PM_OPS(xhci_plat_runtime_suspend, xhci_plat_runtime_resume,
+ xhci_plat_runtime_idle)
};
-#define DEV_PM_OPS (&xhci_plat_pm_ops)
-#else
-#define DEV_PM_OPS NULL
-#endif /* CONFIG_PM */
static const struct acpi_device_id usb_xhci_acpi_match[] = {
/* XHCI-compliant USB Controller */
@@ -332,7 +363,7 @@ static int xhci_plat_resume(struct device *dev)
.remove = xhci_plat_remove,
.driver = {
.name = "xhci-hcd",
- .pm = DEV_PM_OPS,
+ .pm = &xhci_plat_pm_ops,
.of_match_table = of_match_ptr(usb_xhci_of_match),
.acpi_match_table = ACPI_PTR(usb_xhci_acpi_match),
},
--
1.7.9.5
For some mobile devices with strict power management, we also want to suspend
the host when the slave is detached for power saving. Thus we add the host
suspend/resume functions to support this requirement.
Signed-off-by: Baolin Wang <[email protected]>
---
Changes since v2:
- Remove pm_children_suspended() and other unused macros.
Changes since v1:
- Add pm_runtime.h head file to avoid kbuild error.
---
drivers/usb/dwc3/Kconfig | 7 +++++++
drivers/usb/dwc3/core.c | 26 +++++++++++++++++++++++++-
drivers/usb/dwc3/core.h | 15 +++++++++++++++
drivers/usb/dwc3/host.c | 37 +++++++++++++++++++++++++++++++++++++
4 files changed, 84 insertions(+), 1 deletion(-)
diff --git a/drivers/usb/dwc3/Kconfig b/drivers/usb/dwc3/Kconfig
index a45b4f1..47bb2f3 100644
--- a/drivers/usb/dwc3/Kconfig
+++ b/drivers/usb/dwc3/Kconfig
@@ -47,6 +47,13 @@ config USB_DWC3_DUAL_ROLE
endchoice
+config USB_DWC3_HOST_SUSPEND
+ bool "Choose if the DWC3 host (xhci) can be suspend/resume"
+ depends on USB_DWC3_HOST=y || USB_DWC3_DUAL_ROLE=y
+ help
+ We can suspend the host when the slave is detached for power saving,
+ and resume the host when one slave is attached.
+
comment "Platform Glue Driver Support"
config USB_DWC3_OMAP
diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
index 9a4a5e4..7ad4bc3 100644
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -1091,6 +1091,7 @@ static int dwc3_probe(struct platform_device *pdev)
pm_runtime_use_autosuspend(dev);
pm_runtime_set_autosuspend_delay(dev, DWC3_DEFAULT_AUTOSUSPEND_DELAY);
pm_runtime_enable(dev);
+ pm_suspend_ignore_children(dev, true);
ret = pm_runtime_get_sync(dev);
if (ret < 0)
goto err1;
@@ -1215,15 +1216,27 @@ static int dwc3_remove(struct platform_device *pdev)
static int dwc3_suspend_common(struct dwc3 *dwc)
{
unsigned long flags;
+ int ret;
switch (dwc->dr_mode) {
case USB_DR_MODE_PERIPHERAL:
+ spin_lock_irqsave(&dwc->lock, flags);
+ dwc3_gadget_suspend(dwc);
+ spin_unlock_irqrestore(&dwc->lock, flags);
+ break;
case USB_DR_MODE_OTG:
+ ret = dwc3_host_suspend(dwc);
+ if (ret)
+ return ret;
+
spin_lock_irqsave(&dwc->lock, flags);
dwc3_gadget_suspend(dwc);
spin_unlock_irqrestore(&dwc->lock, flags);
break;
case USB_DR_MODE_HOST:
+ ret = dwc3_host_suspend(dwc);
+ if (ret)
+ return ret;
default:
/* do nothing */
break;
@@ -1245,12 +1258,23 @@ static int dwc3_resume_common(struct dwc3 *dwc)
switch (dwc->dr_mode) {
case USB_DR_MODE_PERIPHERAL:
+ spin_lock_irqsave(&dwc->lock, flags);
+ dwc3_gadget_resume(dwc);
+ spin_unlock_irqrestore(&dwc->lock, flags);
+ break;
case USB_DR_MODE_OTG:
+ ret = dwc3_host_resume(dwc);
+ if (ret)
+ return ret;
+
spin_lock_irqsave(&dwc->lock, flags);
dwc3_gadget_resume(dwc);
spin_unlock_irqrestore(&dwc->lock, flags);
- /* FALLTHROUGH */
+ break;
case USB_DR_MODE_HOST:
+ ret = dwc3_host_resume(dwc);
+ if (ret)
+ return ret;
default:
/* do nothing */
break;
diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
index b585a30..db41908 100644
--- a/drivers/usb/dwc3/core.h
+++ b/drivers/usb/dwc3/core.h
@@ -1226,4 +1226,19 @@ static inline void dwc3_ulpi_exit(struct dwc3 *dwc)
{ }
#endif
+#if IS_ENABLED(CONFIG_USB_DWC3_HOST_SUSPEND)
+int dwc3_host_suspend(struct dwc3 *dwc);
+int dwc3_host_resume(struct dwc3 *dwc);
+#else
+static inline int dwc3_host_suspend(struct dwc3 *dwc)
+{
+ return 0;
+}
+
+static inline int dwc3_host_resume(struct dwc3 *dwc)
+{
+ return 0;
+}
+#endif
+
#endif /* __DRIVERS_USB_DWC3_CORE_H */
diff --git a/drivers/usb/dwc3/host.c b/drivers/usb/dwc3/host.c
index ed82464..8e5309d6 100644
--- a/drivers/usb/dwc3/host.c
+++ b/drivers/usb/dwc3/host.c
@@ -16,6 +16,7 @@
*/
#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
#include "core.h"
@@ -130,3 +131,39 @@ void dwc3_host_exit(struct dwc3 *dwc)
dev_name(&dwc->xhci->dev));
platform_device_unregister(dwc->xhci);
}
+
+#ifdef CONFIG_USB_DWC3_HOST_SUSPEND
+int dwc3_host_suspend(struct dwc3 *dwc)
+{
+ struct device *xhci = &dwc->xhci->dev;
+ int ret;
+
+ /*
+ * Note: if we get the -EBUSY, which means the xHCI children devices are
+ * not in suspend state yet, the glue layer need to wait for a while and
+ * try to suspend xHCI device again.
+ */
+ ret = pm_runtime_put_sync(xhci);
+ if (ret) {
+ dev_err(xhci, "failed to suspend xHCI device\n");
+ return ret;
+ }
+
+ return 0;
+}
+
+int dwc3_host_resume(struct dwc3 *dwc)
+{
+ struct device *xhci = &dwc->xhci->dev;
+ int ret;
+
+ /* Resume the xHCI device synchronously. */
+ ret = pm_runtime_get_sync(xhci);
+ if (ret) {
+ dev_err(xhci, "failed to resume xHCI device\n");
+ return ret;
+ }
+
+ return 0;
+}
+#endif
--
1.7.9.5
Hi Baolin,
[auto build test ERROR on v4.9-rc6]
[also build test ERROR on next-20161123]
[cannot apply to balbi-usb/next usb/usb-testing]
[if your patch is applied to the wrong git tree, please drop us a note to help improve the system]
url: https://github.com/0day-ci/linux/commits/Baolin-Wang/usb-host-plat-Enable-xhci-plat-runtime-PM/20161124-012323
config: x86_64-randconfig-x008-201647 (attached as .config)
compiler: gcc-6 (Debian 6.2.0-3) 6.2.0 20160901
reproduce:
# save the attached .config to linux build tree
make ARCH=x86_64
All errors (new ones prefixed by >>):
drivers/usb/host/xhci-plat.c: In function 'xhci_plat_remove':
>> drivers/usb/host/xhci-plat.c:281:28: error: 'pdev' undeclared (first use in this function)
pm_runtime_set_suspended(&pdev->dev);
^~~~
drivers/usb/host/xhci-plat.c:281:28: note: each undeclared identifier is reported only once for each function it appears in
vim +/pdev +281 drivers/usb/host/xhci-plat.c
275 static int xhci_plat_remove(struct platform_device *dev)
276 {
277 struct usb_hcd *hcd = platform_get_drvdata(dev);
278 struct xhci_hcd *xhci = hcd_to_xhci(hcd);
279 struct clk *clk = xhci->clk;
280
> 281 pm_runtime_set_suspended(&pdev->dev);
282 pm_runtime_put_noidle(&pdev->dev);
283 pm_runtime_disable(&dev->dev);
284
---
0-DAY kernel test infrastructure Open Source Technology Center
https://lists.01.org/pipermail/kbuild-all Intel Corporation
On 24 November 2016 at 01:39, kbuild test robot <[email protected]> wrote:
> Hi Baolin,
>
> [auto build test ERROR on v4.9-rc6]
> [also build test ERROR on next-20161123]
> [cannot apply to balbi-usb/next usb/usb-testing]
> [if your patch is applied to the wrong git tree, please drop us a note to help improve the system]
>
> url: https://github.com/0day-ci/linux/commits/Baolin-Wang/usb-host-plat-Enable-xhci-plat-runtime-PM/20161124-012323
> config: x86_64-randconfig-x008-201647 (attached as .config)
> compiler: gcc-6 (Debian 6.2.0-3) 6.2.0 20160901
> reproduce:
> # save the attached .config to linux build tree
> make ARCH=x86_64
>
> All errors (new ones prefixed by >>):
>
> drivers/usb/host/xhci-plat.c: In function 'xhci_plat_remove':
>>> drivers/usb/host/xhci-plat.c:281:28: error: 'pdev' undeclared (first use in this function)
> pm_runtime_set_suspended(&pdev->dev);
Oops, will fix my mistake in new patch. Please ignore this patch. Sorry.
--
Baolin.wang
Best Regards