Jintack Lim <[email protected]> writes:
> From: Christoffer Dall <[email protected]>
>
> When running in virtual EL2 we use the shadow EL1 systerm register array
> for the save/restore process, so that hardware and especially the memory
> subsystem behaves as code written for EL2 expects while really running
> in EL1.
>
> This works great for EL1 system register accesses that we trap, because
> these accesses will be written into the virtual state for the EL1 system
> registers used when eventually switching the VCPU mode to EL1.
>
> However, there was a collection of EL1 system registers which we do not
> trap, and as a consequence all save/restore operations of these
> registers were happening locally in the shadow array, with no benefit to
> software actually running in virtual EL1 at all.
>
> To fix this, simply synchronize the shadow and real EL1 state for these
> registers on entry/exit to/from virtual EL2 state.
>
> Signed-off-by: Christoffer Dall <[email protected]>
> Signed-off-by: Jintack Lim <[email protected]>
> ---
> arch/arm64/kvm/context.c | 47 +++++++++++++++++++++++++++++++++++++++++++++++
> 1 file changed, 47 insertions(+)
>
> diff --git a/arch/arm64/kvm/context.c b/arch/arm64/kvm/context.c
> index 2e9e386..0025dd9 100644
> --- a/arch/arm64/kvm/context.c
> +++ b/arch/arm64/kvm/context.c
> @@ -88,6 +88,51 @@ static void create_shadow_el1_sysregs(struct kvm_vcpu *vcpu)
> s_sys_regs[CPACR_EL1] = cptr_el2_to_cpacr_el1(el2_regs[CPTR_EL2]);
> }
>
> +/*
> + * List of EL1 registers which we allow the virtual EL2 mode to access
> + * directly without trapping and which haven't been paravirtualized.
> + *
> + * Probably CNTKCTL_EL1 should not be copied but be accessed via trap. Because,
> + * the guest hypervisor running in EL1 can be affected by event streams
> + * configured via CNTKCTL_EL1, which it does not expect. We don't have a
> + * mechanism to trap on CNTKCTL_EL1 as of now (v8.3), keep it in here instead.
> + */
> +static const int el1_non_trap_regs[] = {
> + CNTKCTL_EL1,
> + CSSELR_EL1,
> + PAR_EL1,
> + TPIDR_EL0,
> + TPIDR_EL1,
> + TPIDRRO_EL0
> +};
> +
Do we trap on all register accesses in the non-nested case +
all accesses to the memory access registers ? I am trying to
understand how we decide what registers to trap on. For example,
shouldn't accesses to CSSELR_EL1, the cache size selection register
be trapped ?
Bandan
> +/**
> + * sync_shadow_el1_state - Going to/from the virtual EL2 state, sync state
> + * @vcpu: The VCPU pointer
> + * @setup: True, if on the way to the guest (called from setup)
> + * False, if returning form the guet (calld from restore)
> + *
> + * Some EL1 registers are accessed directly by the virtual EL2 mode because
> + * they in no way affect execution state in virtual EL2. However, we must
> + * still ensure that virtual EL2 observes the same state of the EL1 registers
> + * as the normal VM's EL1 mode, so copy this state as needed on setup/restore.
> + */
> +static void sync_shadow_el1_state(struct kvm_vcpu *vcpu, bool setup)
> +{
> + u64 *sys_regs = vcpu->arch.ctxt.sys_regs;
> + u64 *s_sys_regs = vcpu->arch.ctxt.shadow_sys_regs;
> + int i;
> +
> + for (i = 0; i < ARRAY_SIZE(el1_non_trap_regs); i++) {
> + const int sr = el1_non_trap_regs[i];
> +
> + if (setup)
> + s_sys_regs[sr] = sys_regs[sr];
> + else
> + sys_regs[sr] = s_sys_regs[sr];
> + }
> +}
> +
> /**
> * kvm_arm_setup_shadow_state -- prepare shadow state based on emulated mode
> * @vcpu: The VCPU pointer
> @@ -107,6 +152,7 @@ void kvm_arm_setup_shadow_state(struct kvm_vcpu *vcpu)
> else
> ctxt->hw_pstate |= PSR_MODE_EL1t;
>
> + sync_shadow_el1_state(vcpu, true);
> create_shadow_el1_sysregs(vcpu);
> ctxt->hw_sys_regs = ctxt->shadow_sys_regs;
> ctxt->hw_sp_el1 = ctxt->el2_regs[SP_EL2];
> @@ -125,6 +171,7 @@ void kvm_arm_restore_shadow_state(struct kvm_vcpu *vcpu)
> {
> struct kvm_cpu_context *ctxt = &vcpu->arch.ctxt;
> if (unlikely(vcpu_mode_el2(vcpu))) {
> + sync_shadow_el1_state(vcpu, false);
> *vcpu_cpsr(vcpu) &= PSR_MODE_MASK;
> *vcpu_cpsr(vcpu) |= ctxt->hw_pstate & ~PSR_MODE_MASK;
> ctxt->el2_regs[SP_EL2] = ctxt->hw_sp_el1;
Hi Bandan,
On Tue, Jun 6, 2017 at 4:16 PM, Bandan Das <[email protected]> wrote:
> Jintack Lim <[email protected]> writes:
>
>> From: Christoffer Dall <[email protected]>
>>
>> When running in virtual EL2 we use the shadow EL1 systerm register array
>> for the save/restore process, so that hardware and especially the memory
>> subsystem behaves as code written for EL2 expects while really running
>> in EL1.
>>
>> This works great for EL1 system register accesses that we trap, because
>> these accesses will be written into the virtual state for the EL1 system
>> registers used when eventually switching the VCPU mode to EL1.
>>
>> However, there was a collection of EL1 system registers which we do not
>> trap, and as a consequence all save/restore operations of these
>> registers were happening locally in the shadow array, with no benefit to
>> software actually running in virtual EL1 at all.
>>
>> To fix this, simply synchronize the shadow and real EL1 state for these
>> registers on entry/exit to/from virtual EL2 state.
>>
>> Signed-off-by: Christoffer Dall <[email protected]>
>> Signed-off-by: Jintack Lim <[email protected]>
>> ---
>> arch/arm64/kvm/context.c | 47 +++++++++++++++++++++++++++++++++++++++++++++++
>> 1 file changed, 47 insertions(+)
>>
>> diff --git a/arch/arm64/kvm/context.c b/arch/arm64/kvm/context.c
>> index 2e9e386..0025dd9 100644
>> --- a/arch/arm64/kvm/context.c
>> +++ b/arch/arm64/kvm/context.c
>> @@ -88,6 +88,51 @@ static void create_shadow_el1_sysregs(struct kvm_vcpu *vcpu)
>> s_sys_regs[CPACR_EL1] = cptr_el2_to_cpacr_el1(el2_regs[CPTR_EL2]);
>> }
>>
>> +/*
>> + * List of EL1 registers which we allow the virtual EL2 mode to access
>> + * directly without trapping and which haven't been paravirtualized.
>> + *
>> + * Probably CNTKCTL_EL1 should not be copied but be accessed via trap. Because,
>> + * the guest hypervisor running in EL1 can be affected by event streams
>> + * configured via CNTKCTL_EL1, which it does not expect. We don't have a
>> + * mechanism to trap on CNTKCTL_EL1 as of now (v8.3), keep it in here instead.
>> + */
>> +static const int el1_non_trap_regs[] = {
>> + CNTKCTL_EL1,
>> + CSSELR_EL1,
>> + PAR_EL1,
>> + TPIDR_EL0,
>> + TPIDR_EL1,
>> + TPIDRRO_EL0
>> +};
>> +
>
> Do we trap on all register accesses in the non-nested case +
> all accesses to the memory access registers ? I am trying to
> understand how we decide what registers to trap on. For example,
> shouldn't accesses to CSSELR_EL1, the cache size selection register
> be trapped ?
So, the principle is that we trap on EL1 register accesses from the
virtual EL2 if those EL1 register accesses without trap make the guest
hypervisor's execution different from what it should be if it really
runs in EL2. (e.g. A write operation to TTBR0_EL1 from the guest
hypervisor without trap will change the guest hypervisor's page table
base. However, if a hypervisor runs in EL2, this operation only
affects the software running in EL1, not itself.)
For non-nested case, this patch does not introduce any additional
traps since there's no virtual EL2 state.
For CSSELR_EL1 case, this register can be used at any exception level
other than EL0 and its behavior is the same whether it is executed in
EL1 or EL2. In other words, the guest hypervisor can interact with
this register in EL1 just the way a non-nesting hypervisor would do in
EL2.
Thanks,
Jintack
>
> Bandan
>
>
>> +/**
>> + * sync_shadow_el1_state - Going to/from the virtual EL2 state, sync state
>> + * @vcpu: The VCPU pointer
>> + * @setup: True, if on the way to the guest (called from setup)
>> + * False, if returning form the guet (calld from restore)
>> + *
>> + * Some EL1 registers are accessed directly by the virtual EL2 mode because
>> + * they in no way affect execution state in virtual EL2. However, we must
>> + * still ensure that virtual EL2 observes the same state of the EL1 registers
>> + * as the normal VM's EL1 mode, so copy this state as needed on setup/restore.
>> + */
>> +static void sync_shadow_el1_state(struct kvm_vcpu *vcpu, bool setup)
>> +{
>> + u64 *sys_regs = vcpu->arch.ctxt.sys_regs;
>> + u64 *s_sys_regs = vcpu->arch.ctxt.shadow_sys_regs;
>> + int i;
>> +
>> + for (i = 0; i < ARRAY_SIZE(el1_non_trap_regs); i++) {
>> + const int sr = el1_non_trap_regs[i];
>> +
>> + if (setup)
>> + s_sys_regs[sr] = sys_regs[sr];
>> + else
>> + sys_regs[sr] = s_sys_regs[sr];
>> + }
>> +}
>> +
>> /**
>> * kvm_arm_setup_shadow_state -- prepare shadow state based on emulated mode
>> * @vcpu: The VCPU pointer
>> @@ -107,6 +152,7 @@ void kvm_arm_setup_shadow_state(struct kvm_vcpu *vcpu)
>> else
>> ctxt->hw_pstate |= PSR_MODE_EL1t;
>>
>> + sync_shadow_el1_state(vcpu, true);
>> create_shadow_el1_sysregs(vcpu);
>> ctxt->hw_sys_regs = ctxt->shadow_sys_regs;
>> ctxt->hw_sp_el1 = ctxt->el2_regs[SP_EL2];
>> @@ -125,6 +171,7 @@ void kvm_arm_restore_shadow_state(struct kvm_vcpu *vcpu)
>> {
>> struct kvm_cpu_context *ctxt = &vcpu->arch.ctxt;
>> if (unlikely(vcpu_mode_el2(vcpu))) {
>> + sync_shadow_el1_state(vcpu, false);
>> *vcpu_cpsr(vcpu) &= PSR_MODE_MASK;
>> *vcpu_cpsr(vcpu) |= ctxt->hw_pstate & ~PSR_MODE_MASK;
>> ctxt->el2_regs[SP_EL2] = ctxt->hw_sp_el1;
> _______________________________________________
> kvmarm mailing list
> [email protected]
> https://lists.cs.columbia.edu/mailman/listinfo/kvmarm