This series introduces support for the Qualcomm SM7125 SoC and the
Xiaomi SM7125 platform.
Signed-off-by: David Wronek <[email protected]>
---
Changes in v2:
- Allow qcom,board-id and qcom,msm-id properties
- Use QCOM_SCM_VMID_MSS_MSA definition
- Change initial regulator modes from LPM to HPM
- Move status to the bottom of nodes
- Fix up PM6150 interrupts
- Move clk patch to beginning of series
- Fix up copyright
- Take ownership of all commits with permission
- Link to v1: https://lore.kernel.org/all/[email protected]/
Changes in v3:
- Disable pm6150 rtc by default
- Fix wrong pm8150l PMIC in joyeuse dts
- Link to v2: https://lore.kernel.org/all/[email protected]/
Changes in v4:
- Fix key-vol-down node name
- Link to v3: https://lore.kernel.org/all/[email protected]/
---
David Wronek (7):
clk: qcom: gcc-sc7180: Fix up gcc_sdcc2_apps_clk_src
dt-bindings: arm: qcom,ids: Add SoC ID for SM7125
dt-bindings: arm: qcom: Document SM7125 and xiaomi,joyeuse board
soc: qcom: socinfo: Add SoC ID for SM7125
arm64: dts: qcom: pm6150: Add resin and rtc nodes
arm64: dts: qcom: Add SM7125 device tree
arm64: dts: qcom: Add support for the Xiaomi SM7125 platform
.../devicetree/bindings/arm/qcom.yaml | 7 +
arch/arm64/boot/dts/qcom/Makefile | 1 +
arch/arm64/boot/dts/qcom/pm6150.dtsi | 16 +
.../boot/dts/qcom/sm7125-xiaomi-joyeuse.dts | 16 +
.../boot/dts/qcom/sm7125-xiaomi-miatoll.dtsi | 423 ++++++++++++++++++
arch/arm64/boot/dts/qcom/sm7125.dtsi | 16 +
drivers/clk/qcom/gcc-sc7180.c | 1 +
drivers/soc/qcom/socinfo.c | 1 +
include/dt-bindings/arm/qcom,ids.h | 1 +
9 files changed, 482 insertions(+)
create mode 100644 arch/arm64/boot/dts/qcom/sm7125-xiaomi-joyeuse.dts
create mode 100644 arch/arm64/boot/dts/qcom/sm7125-xiaomi-miatoll.dtsi
create mode 100644 arch/arm64/boot/dts/qcom/sm7125.dtsi
--
2.41.0
Add support for the RTC which is the same as on other PMICs and add the
resin child node to the PM6150 PON device, both disabled by default.
Signed-off-by: David Wronek <[email protected]>
Tested-by: Nikita Travkin <[email protected]>
Reviewed-by: Konrad Dybcio <[email protected]>
---
arch/arm64/boot/dts/qcom/pm6150.dtsi | 16 ++++++++++++++++
1 file changed, 16 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/pm6150.dtsi b/arch/arm64/boot/dts/qcom/pm6150.dtsi
index 2e6afa296141..af51eb0646ba 100644
--- a/arch/arm64/boot/dts/qcom/pm6150.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm6150.dtsi
@@ -53,6 +53,14 @@ pm6150_pwrkey: pwrkey {
bias-pull-up;
linux,code = <KEY_POWER>;
};
+
+ pm6150_resin: resin {
+ compatible = "qcom,pm8941-resin";
+ interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>;
+ debounce = <15625>;
+ bias-pull-up;
+ status = "disabled";
+ };
};
pm6150_temp: temp-alarm@2400 {
@@ -88,6 +96,14 @@ pm6150_adc_tm: adc-tm@3500 {
status = "disabled";
};
+ pm6150_rtc: rtc@6000 {
+ compatible = "qcom,pm8941-rtc";
+ reg = <0x6000>, <0x6100>;
+ reg-names = "rtc", "alarm";
+ interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>;
+ status = "disabled";
+ };
+
pm6150_gpios: gpio@c000 {
compatible = "qcom,pm6150-gpio", "qcom,spmi-gpio";
reg = <0xc000>;
--
2.41.0
There are 6 Xiaomi smartphones with the SM7125 SoC:
- POCO M2 Pro (gram)
- Redmi Note 9S (curtana)
- Redmi Note 9 Pro (Global, joyeuse)
- Redmi Note 9 Pro (India, curtana)
- Redmi Note 9 Pro Max (excalibur)
- Redmi Note 10 Lite (curtana)
These devices share a common board design (a.k.a miatoll) with only a
few differences. Add support for the common board, as well as support
for the global Redmi Note 9 Pro.
Signed-off-by: David Wronek <[email protected]>
Reviewed-by: Konrad Dybcio <[email protected]>
---
arch/arm64/boot/dts/qcom/Makefile | 1 +
.../boot/dts/qcom/sm7125-xiaomi-joyeuse.dts | 16 +
.../boot/dts/qcom/sm7125-xiaomi-miatoll.dtsi | 423 ++++++++++++++++++
3 files changed, 440 insertions(+)
create mode 100644 arch/arm64/boot/dts/qcom/sm7125-xiaomi-joyeuse.dts
create mode 100644 arch/arm64/boot/dts/qcom/sm7125-xiaomi-miatoll.dtsi
diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index 337abc4ceb17..7ef9e7d43904 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -192,6 +192,7 @@ dtb-$(CONFIG_ARCH_QCOM) += sm6125-sony-xperia-seine-pdx201.dtb
dtb-$(CONFIG_ARCH_QCOM) += sm6125-xiaomi-laurel-sprout.dtb
dtb-$(CONFIG_ARCH_QCOM) += sm6350-sony-xperia-lena-pdx213.dtb
dtb-$(CONFIG_ARCH_QCOM) += sm6375-sony-xperia-murray-pdx225.dtb
+dtb-$(CONFIG_ARCH_QCOM) += sm7125-xiaomi-joyeuse.dtb
dtb-$(CONFIG_ARCH_QCOM) += sm7225-fairphone-fp4.dtb
dtb-$(CONFIG_ARCH_QCOM) += sm8150-hdk.dtb
dtb-$(CONFIG_ARCH_QCOM) += sm8150-microsoft-surface-duo.dtb
diff --git a/arch/arm64/boot/dts/qcom/sm7125-xiaomi-joyeuse.dts b/arch/arm64/boot/dts/qcom/sm7125-xiaomi-joyeuse.dts
new file mode 100644
index 000000000000..2b3d1ed1bcae
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sm7125-xiaomi-joyeuse.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2021, The Linux Foundation. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include "sm7125-xiaomi-miatoll.dtsi"
+
+/ {
+ model = "Xiaomi Redmi Note 9 Pro (Global)";
+ compatible = "xiaomi,joyeuse", "qcom,sm7125";
+
+ /* required for bootloader to select correct board */
+ qcom,board-id = <0x50022 1>;
+};
diff --git a/arch/arm64/boot/dts/qcom/sm7125-xiaomi-miatoll.dtsi b/arch/arm64/boot/dts/qcom/sm7125-xiaomi-miatoll.dtsi
new file mode 100644
index 000000000000..e55cd83c19b8
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sm7125-xiaomi-miatoll.dtsi
@@ -0,0 +1,423 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2021, The Linux Foundation. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/arm/qcom,ids.h>
+#include <dt-bindings/firmware/qcom,scm.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include "sm7125.dtsi"
+#include "pm6150.dtsi"
+#include "pm6150l.dtsi"
+
+/delete-node/ &ipa_fw_mem;
+/delete-node/ &rmtfs_mem;
+
+/ {
+ chassis-type = "handset";
+
+ qcom,msm-id = <QCOM_ID_SM7125 0>;
+
+ chosen {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ framebuffer@9c000000 {
+ compatible = "simple-framebuffer";
+ reg = <0x0 0x9c000000 0x0 (1080 * 2400 * 4)>;
+ width = <1080>;
+ height = <2400>;
+ stride = <(1080 * 4)>;
+ format = "a8r8g8b8";
+ clocks = <&gcc GCC_DISP_HF_AXI_CLK>;
+ };
+ };
+
+ gpio_keys: gpio-keys {
+ compatible = "gpio-keys";
+
+ key-vol-up {
+ label = "Volume Up";
+ linux,code = <KEY_VOLUMEUP>;
+ gpios = <&pm6150l_gpios 2 GPIO_ACTIVE_LOW>;
+ debounce-interval = <15>;
+ linux,can-disable;
+ wakeup-source;
+ };
+ };
+
+ reserved-memory {
+ mpss_mem: memory@86000000 {
+ reg = <0x0 0x86000000 0x0 0x8400000>;
+ no-map;
+ };
+
+ venus_mem: memory@8ee00000 {
+ reg = <0x0 0x8ee00000 0x0 0x500000>;
+ no-map;
+ };
+
+ cdsp_mem: memory@8f300000 {
+ reg = <0x0 0x8f300000 0x0 0x1e00000>;
+ no-map;
+ };
+
+ adsp_mem: memory@91100000 {
+ reg = <0x0 0x91100000 0x0 0x2800000>;
+ no-map;
+ };
+
+ wlan_mem: memory@93900000 {
+ reg = <0x0 0x93900000 0x0 0x200000>;
+ no-map;
+ };
+
+ ipa_fw_mem: memory@93b00000 {
+ reg = <0x0 0x93b00000 0x0 0x10000>;
+ no-map;
+ };
+
+ gpu_mem: memory@93b15000 {
+ reg = <0x0 0x93b15000 0x0 0x2000>;
+ no-map;
+ };
+
+ cont_splash_mem: memory@9c000000 {
+ reg = <0x0 0x9c000000 0x0 (1080 * 2400 * 4)>;
+ no-map;
+ };
+
+ pstore_mem: ramoops@9d800000 {
+ compatible = "ramoops";
+ reg = <0x0 0x9d800000 0x0 0x400000>;
+ record-size = <0x80000>;
+ pmsg-size = <0x200000>;
+ console-size = <0x100000>;
+ };
+
+ rmtfs_mem: memory@fa601000 {
+ compatible = "qcom,rmtfs-mem";
+ reg = <0x0 0xfa601000 0x0 0x200000>;
+ no-map;
+
+ qcom,client-id = <1>;
+ qcom,vmid = <QCOM_SCM_VMID_MSS_MSA>;
+ };
+ };
+};
+
+&apps_rsc {
+ regulators-0 {
+ compatible = "qcom,pm6150-rpmh-regulators";
+ qcom,pmic-id = "a";
+
+ vreg_s1a_1p1: smps1 {
+ regulator-min-microvolt = <1128000>;
+ regulator-max-microvolt = <1128000>;
+ };
+
+ vreg_s4a_1p0: smps4 {
+ regulator-min-microvolt = <824000>;
+ regulator-max-microvolt = <1120000>;
+ };
+
+ vreg_s5a_2p0: smps5 {
+ regulator-min-microvolt = <1744000>;
+ regulator-max-microvolt = <2040000>;
+ };
+
+ vreg_l1a_1p2: ldo1 {
+ regulator-min-microvolt = <1178000>;
+ regulator-max-microvolt = <1256000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l2a_1p0: ldo2 {
+ regulator-min-microvolt = <944000>;
+ regulator-max-microvolt = <1056000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l3a_1p0: ldo3 {
+ regulator-min-microvolt = <968000>;
+ regulator-max-microvolt = <1064000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l4a_0p88: ldo4 {
+ regulator-min-microvolt = <824000>;
+ regulator-max-microvolt = <928000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l5a_2p7: ldo5 {
+ regulator-min-microvolt = <2496000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l6a_0p6: ldo6 {
+ regulator-min-microvolt = <568000>;
+ regulator-max-microvolt = <648000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l9a_0p664: ldo9 {
+ regulator-min-microvolt = <488000>;
+ regulator-max-microvolt = <800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l10a_1p8: ldo10 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1832000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l11a_1p8: ldo11 {
+ regulator-min-microvolt = <1696000>;
+ regulator-max-microvolt = <1904000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l12a_1p8: ldo12 {
+ regulator-min-microvolt = <1696000>;
+ regulator-max-microvolt = <1952000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l13a_1p8: ldo13 {
+ regulator-min-microvolt = <1696000>;
+ regulator-max-microvolt = <1904000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l14a_1p8: ldo14 {
+ regulator-min-microvolt = <1728000>;
+ regulator-max-microvolt = <1832000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l15a_1p8: ldo15 {
+ regulator-min-microvolt = <1696000>;
+ regulator-max-microvolt = <1904000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l16a_2p7: ldo16 {
+ regulator-min-microvolt = <2496000>;
+ regulator-max-microvolt = <3304000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l17a_3p1: ldo17 {
+ regulator-min-microvolt = <2920000>;
+ regulator-max-microvolt = <3232000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l18a_3p0: ldo18 {
+ regulator-min-microvolt = <1696000>;
+ regulator-max-microvolt = <1904000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l19a_3p0: ldo19 {
+ regulator-min-microvolt = <2696000>;
+ regulator-max-microvolt = <3304000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+
+ regulators-1 {
+ compatible = "qcom,pm6150l-rpmh-regulators";
+ qcom,pmic-id = "c";
+
+ vreg_s8c_1p3: smps8 {
+ regulator-min-microvolt = <1120000>;
+ regulator-max-microvolt = <1408000>;
+ };
+
+ vreg_l1c_1p8: ldo1 {
+ regulator-min-microvolt = <1616000>;
+ regulator-max-microvolt = <1984000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l2c_1p3: ldo2 {
+ regulator-min-microvolt = <1168000>;
+ regulator-max-microvolt = <1304000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l3c_1p23: ldo3 {
+ regulator-min-microvolt = <1144000>;
+ regulator-max-microvolt = <1304000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l4c_1p8: ldo4 {
+ regulator-min-microvolt = <1648000>;
+ regulator-max-microvolt = <3304000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l5c_1p8: ldo5 {
+ regulator-min-microvolt = <1648000>;
+ regulator-max-microvolt = <3304000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l6c_3p0: ldo6 {
+ regulator-min-microvolt = <1648000>;
+ regulator-max-microvolt = <3304000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l7c_3p0: ldo7 {
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3312000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l8c_1p8: ldo8 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1904000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l9c_2p9: ldo9 {
+ regulator-min-microvolt = <2952000>;
+ regulator-max-microvolt = <3304000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l10c_3p3: ldo10 {
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3400000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l11c_3p3: ldo11 {
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3400000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_bob: bob {
+ regulator-min-microvolt = <3008000>;
+ regulator-max-microvolt = <3960000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
+ };
+ };
+};
+
+&dispcc {
+ /* HACK: disable until a panel driver is ready to retain simplefb */
+ status = "disabled";
+};
+
+&pm6150_resin {
+ linux,code = <KEY_VOLUMEDOWN>;
+ status = "okay";
+};
+
+&pm6150_rtc {
+ status = "okay";
+};
+
+&sdhc_2 {
+ cd-gpios = <&tlmm 69 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default","sleep";
+ pinctrl-0 = <&sdc2_on>;
+ pinctrl-1 = <&sdc2_off>;
+ vmmc-supply = <&vreg_l9c_2p9>;
+ vqmmc-supply = <&vreg_l6c_3p0>;
+ status = "okay";
+};
+
+&tlmm {
+ gpio-reserved-ranges = <0 4>, <34 4>, <59 4>;
+
+ sdc2_on: sdc2-on-state {
+ clk-pins {
+ pins = "sdc2_clk";
+ bias-disable;
+ drive-strength = <16>;
+ };
+
+ cmd-pins {
+ pins = "sdc2_cmd";
+ bias-pull-up;
+ drive-strength = <10>;
+ };
+
+ data-pins {
+ pins = "sdc2_data";
+ bias-pull-up;
+ drive-strength = <10>;
+ };
+
+ sd-cd-pins {
+ pins = "gpio69";
+ function = "gpio";
+ bias-pull-up;
+ drive-strength = <2>;
+ };
+ };
+
+ sdc2_off: sdc2-off-state {
+ clk-pins {
+ pins = "sdc2_clk";
+ bias-disable;
+ drive-strength = <2>;
+ };
+
+ cmd-pins {
+ pins = "sdc2_cmd";
+ bias-pull-up;
+ drive-strength = <2>;
+ };
+
+ data-pins {
+ pins = "sdc2_data";
+ bias-pull-up;
+ drive-strength = <2>;
+ };
+
+ sd-cd-pins {
+ pins = "gpio69";
+ function = "gpio";
+ bias-pull-up;
+ drive-strength = <2>;
+ };
+ };
+};
+
+&usb_1 {
+ qcom,select-utmi-as-pipe-clk;
+ status = "okay";
+};
+
+&usb_1_dwc3 {
+ dr_mode = "peripheral";
+ maximum-speed = "high-speed";
+ status = "okay";
+};
+
+&usb_1_hsphy {
+ vdd-supply = <&vreg_l4a_0p88>;
+ vdda-phy-dpdm-supply = <&vreg_l17a_3p1>;
+ vdda-pll-supply = <&vreg_l11a_1p8>;
+ status = "okay";
+};
+
+&usb_1_qmpphy {
+ vdda-phy-supply = <&vreg_l4a_0p88>;
+ vdda-pll-supply = <&vreg_l3c_1p23>;
+ status = "okay";
+};
--
2.41.0
Add the SoC ID for Qualcomm SM7125.
Signed-off-by: David Wronek <[email protected]>
Acked-by: Krzysztof Kozlowski <[email protected]>
---
include/dt-bindings/arm/qcom,ids.h | 1 +
1 file changed, 1 insertion(+)
diff --git a/include/dt-bindings/arm/qcom,ids.h b/include/dt-bindings/arm/qcom,ids.h
index bcbe9ee2cdaf..6a8dd2e42b24 100644
--- a/include/dt-bindings/arm/qcom,ids.h
+++ b/include/dt-bindings/arm/qcom,ids.h
@@ -215,6 +215,7 @@
#define QCOM_ID_SDA429W 437
#define QCOM_ID_SM8350 439
#define QCOM_ID_QCM2290 441
+#define QCOM_ID_SM7125 443
#define QCOM_ID_SM6115 444
#define QCOM_ID_IPQ5010 446
#define QCOM_ID_IPQ5018 447
--
2.41.0
On 2023-07-23 21:05:01, David Wronek wrote:
> This series introduces support for the Qualcomm SM7125 SoC and the
> Xiaomi SM7125 platform.
>
> Signed-off-by: David Wronek <[email protected]>
> ---
> Changes in v2:
> - Allow qcom,board-id and qcom,msm-id properties
> - Use QCOM_SCM_VMID_MSS_MSA definition
> - Change initial regulator modes from LPM to HPM
> - Move status to the bottom of nodes
> - Fix up PM6150 interrupts
> - Move clk patch to beginning of series
> - Fix up copyright
> - Take ownership of all commits with permission
> - Link to v1: https://lore.kernel.org/all/[email protected]/
>
> Changes in v3:
> - Disable pm6150 rtc by default
> - Fix wrong pm8150l PMIC in joyeuse dts
> - Link to v2: https://lore.kernel.org/all/[email protected]/
>
> Changes in v4:
> - Fix key-vol-down node name
> - Link to v3: https://lore.kernel.org/all/[email protected]/
>
> ---
> David Wronek (7):
> clk: qcom: gcc-sc7180: Fix up gcc_sdcc2_apps_clk_src
> dt-bindings: arm: qcom,ids: Add SoC ID for SM7125
> dt-bindings: arm: qcom: Document SM7125 and xiaomi,joyeuse board
> soc: qcom: socinfo: Add SoC ID for SM7125
> arm64: dts: qcom: pm6150: Add resin and rtc nodes
> arm64: dts: qcom: Add SM7125 device tree
> arm64: dts: qcom: Add support for the Xiaomi SM7125 platform
>
> .../devicetree/bindings/arm/qcom.yaml | 7 +
> arch/arm64/boot/dts/qcom/Makefile | 1 +
> arch/arm64/boot/dts/qcom/pm6150.dtsi | 16 +
> .../boot/dts/qcom/sm7125-xiaomi-joyeuse.dts | 16 +
> .../boot/dts/qcom/sm7125-xiaomi-miatoll.dtsi | 423 ++++++++++++++++++
As brought up on IRC, making it official review by reposting it here on
the lists: Since mi+atoll seems to be a community made-up name, perhaps
this file should just be named sm7125-xiomi-common.dtsi, matching
similar Xiaomi and OnePlus devices with shared DTSI?
Otherwise, just like Sony devices where an official board name _is
known_ the device DTS file should have been named
sm7125-xiaomi-miatoll-joyeuse.dts instead?
- Marijn
> arch/arm64/boot/dts/qcom/sm7125.dtsi | 16 +
> drivers/clk/qcom/gcc-sc7180.c | 1 +
> drivers/soc/qcom/socinfo.c | 1 +
> include/dt-bindings/arm/qcom,ids.h | 1 +
> 9 files changed, 482 insertions(+)
> create mode 100644 arch/arm64/boot/dts/qcom/sm7125-xiaomi-joyeuse.dts
> create mode 100644 arch/arm64/boot/dts/qcom/sm7125-xiaomi-miatoll.dtsi
> create mode 100644 arch/arm64/boot/dts/qcom/sm7125.dtsi
>
> --
> 2.41.0
>
On Sun, 23 Jul 2023 21:05:01 +0200, David Wronek wrote:
> This series introduces support for the Qualcomm SM7125 SoC and the
> Xiaomi SM7125 platform.
>
>
Applied, thanks!
[3/7] dt-bindings: arm: qcom: Document SM7125 and xiaomi,joyeuse board
commit: 9b4adf37fdc0ca8cd1d14b4160e2f04b63df98e6
[5/7] arm64: dts: qcom: pm6150: Add resin and rtc nodes
commit: ec053ec90c245a4efc8dda87d9207de0adf0040e
[6/7] arm64: dts: qcom: Add SM7125 device tree
commit: 72fbf05149bd451e7222c2ed1e3823972f19df9c
[7/7] arm64: dts: qcom: Add support for the Xiaomi SM7125 platform
commit: 7d65d4b7d70fb9560ce9baaf4219fb24646bd578
Best regards,
--
Bjorn Andersson <[email protected]>