Hmm.. All over the map. IDE patches as usual, USB updates, tons of C99
named initializers work, ACPI update, fixes from Alan, driverfs race fixes
and cleanups, SCSI driver fixes from Doug and tons of input layer updates.
Oh, and a new LDM driver, Rusty's CPU hotplug infrastructure, and Ingo's
new cleaned-up GDT code with a per-process gdt segment on x86 for
thread-local storage. And the serial and parallel port drivers seems to
work again on SMP after the big irq lock upheaval.
Linus
----
Summary of changes from v2.5.28 to v2.5.29
============================================
<[email protected]>:
o LSM to designated initializers
Andy Grover <[email protected]>:
o ACPI compile fix
o Interpreter update
o Use C99 initializers (Rusty Russell)
o Last little bit of C99 init fixes Fix panic in EC driver (Dom B)
Add a some more sanity checking (Richard Schaal)
<[email protected]>:
o designated initializer patch for USB
Alan Cox <[email protected]>:
o I2O does not need init in genhd now
o backpack driver only needs module license in one file
o fix umem compile
o epca and specialix warning fixes
o Q40 keyboard
o miropcm20 fails to build
o Update i2o core functionality to 2.5
o ad1848_lib does not build
o CS4281 is missing in sound/pci/Config.in
o fix ALSA PCI compile problems
o Fix other peoples ALSA PCI fixe
o Fix multiple driver build failures due to missing include
o Update tlan driver to new pci api
o Make the tulip compile again
o Fix cisco aironet tristate check
o atp870u scsi update
o SuS/LSB compliance in readv/writev from 2.4
o Handle dunord pci decode problem
o Remove dead i2c bits from media/video
<[email protected]>:
o new USB scanner IDs
<[email protected]>:
o fix unresolved syms for serial drivers
<[email protected]>:
o i385 mm cleanup
Martin Dalecki <[email protected]>:
o 2.5.28 small REQ_SPECIAL abstraction
o 2.5.28 IDE 102-107
<[email protected]>:
o resolve ACPI lockup
<[email protected]>:
o WoL support to the 8139cp ethernet driver
<[email protected]>:
o 2.5: kconfig missing EXPERIMENTAL 3 (10_13)
<[email protected]>:
o Merged hid-lgff.c and hid-lg3d.c
<[email protected]>:
o Ensure xtime_lock and timerlist_lock are on difft cachelines
<[email protected]>:
o CMIPCI compile fix
<[email protected]>:
o New LDM Driver (Windows Dynamic Disks)
Ingo Molnar <[email protected]>:
o Thread-Local Storage (TLS) support
o f00f workaround update, TLS, 2.5.28
o comment fix, 2.5.28
<[email protected]>:
o irqlock fixes
<[email protected]>:
o Made 'make sgmldocs' work again after serial merge [1/9]
o kernel-doc: Improved support for man-page generation [2/9]
o kernel-doc: Generate valid DocBook syntax [3/9]
o kernel-doc: Fix warnings [4/9]
o docbook: scripts/docproc improved [5/9]
o docbook: Makefile cleanup [6/9]
o docbook: Update documentation to reflect new docproc [7/9]
o docbook: Move script target in top-level file [8/9]
o docbook: Call docbook makefile with -f [9/9]
o Remove docgen + gen-all-syms targets
<[email protected]>:
o LSM: CREDITS entries
o LSM: file related LSM hooks
<[email protected]>:
o cli-sti-removal.txt fixup
Anton Blanchard <[email protected]>:
o Missing memory barrier in pte_chain_unlock
Brad Hards <[email protected]>:
o trivial USB Config.help cleanups
Chris Wright <[email protected]>:
o LSM: CREDITS entry
David Brownell <[email protected]>:
o ehci-hcd more polite on cardbus
o ohci unlink cleanups
o ohci-hcd cardbus unplug, remove interrupt length limit,
David Howells <[email protected]>:
o read-write semaphore downgrade and trylock
Doug Ledford <[email protected]>:
o Fix the BusLogic driver in 2.5.x
o Fix cpqfcTS driver in 2.5.x
Greg Kroah-Hartman <[email protected]>:
o LSM: fixed up all of the other archs (non i386) to include the
security config menu
o updated my CREDITS entry
o added ptrace hook for ia64
o LSM: convert initializers to C99 style
o LSM: fixed typo that happened in merge
o i810_audio.c cli/sti fix
o USB: fixed the interface names to have the proper bus id
o USB: fix compiler warning in drivers/usb/serial/digi_acceleport.c
o USB: deleted hid-lg3dff.c as it's no longer needed
o USB: usb-serial.c update the version number, and document the
previous changes
o USB: added driver to support the I/O Networks TI based usb-serial
devices
James Morris <[email protected]>:
o credits update
Linus Torvalds <[email protected]>:
o cmd640 IDE driver internal spinlocks for config etc accesses
o Remove unnecessary (and now nonworking) "sti()" in parport
interrupt probing
o Remove (broken) parport locking, add comment on fixing it
o Make smp_init() happen before initializing drivers
o Don't compile with "-g" by default, that was a left-over from the
global irq-lock debugging
o Clean up more x86 MM init details after splitup
Mikael Pettersson <[email protected]>:
o shrink check_nmi_watchdog stack frame
o fix two unwrapped uses of thread_info->cpu
Neil Brown <[email protected]>:
o remove sti() from calibrate_xor_block()
Patrick Mochel <[email protected]>:
o Remove BKL from driverfs
o Use C99 initializers in driverfs
o driverfs: stop using vfs layer for file creation This is the first
of a series of patches to driverfs to _not_ use the vfs layer for
file creation and deletion.
o driverfs: don't use VFS for directory creation Call driverfs_mkdir
directly, instead of going through vfs.
o driverfs: don't use vfs for creating symlinks Add check for
existence of dentry in driverfs_symlink and driverfs_mknod (which
the other creation functions use).
o driverfs: Don't use VFS for file or directory deletion These are
tied together a bit, so they're included in the same patch
o fix memory leak when driverfs symlink fails
Petr Vandrovec <[email protected]>:
o Do not call ncp_lookup_validate on mountpoint
o Remove unneeded server_file_handle and open_create_action property
from ncpfs info structures
o Return total/free space on ncpfs mounted volume
o Allow access to all 256 volumes from Netware server
o Use search for fileset instead of search for one item in ncpfs. It
is much faster as you usually read whole directory in one request
when using TCP transport, instead
o Check for s_maxbytes and generate SIGXFSZ correctly in ncpfs's read
and write. Only page cache generic_file_read/generic_file_write
check for these conditions, and because of ncpfs does not use page
cache, it must do that itself.
o Update and fix inode attributes handling in ncpfs
o Utilize NFS extended attributes for storing file mode and rdev.
Make sure that you use nodev,nosuid together with nfsextras if you
do not trust server...
o Decide whether to build fs/ncpfs/symlinks.c or not in Makefile and
not through ifdefing whole file out. It should make Al happier.
o ipx use of cli/sti
Russell King <[email protected]>:
o [SERIAL] Remove drivers/char/serial_{21285,amba}.c These drivers
are now part of drivers/serial
o [SERIAL] Fix documentation bug for expected stop_tx interrupt state
o [SERIAL] Fix buglet causing (eg) ttyS-14 Allocate positive instead
of negative line numbers when 8250.c registers a new port with the
core. This bug could cause registrations to erroneously fail, or
oopsen when the pcmcia serial device is ejected.
o [SERIAL] Stop open() looping while opening a non-present port
Trying to open a non-present port (for configuration) causes us to
to endlessly loop (by returning -ERESTARTSYS). We should be
returning success. This cset fixes this.
o [SERIAL] Turn on 8250 framing/parity error reporting on INPCK not
IGNPAR
o designated initalizers for serial/
o [SERIAL] Fix initialiser warnings for HUB6 ports We were missing an
element in the old_serial_port structure.
Rusty Russell <[email protected]>:
o cpu_online() has odd semantics
o Hot-plug CPU Boot Changes
o Hot-plug CPU Boot Rewrite for i386
o Hot-plug CPU Boot Rewrite for PPC
Trond Myklebust <[email protected]>:
o clean up RPC write_space() code
o increase socket buffer for RPC over UDP
o Reduce the number of getattr/lookup calls in
nfs_lookup_revalidate()
o add proper NFSv3 permissions checking
Vojtech Pavlik <[email protected]>:
o Fixes needed to get Logitech WingMan 3D running
o Kernel command line [__setup()] parsing fixes in all the input
drivers that use it, except i8042.
o Update of the X-Box USB pad driver and documentation to version
0.0.5
o This patch by Brad Hards replaces the four id* fields of the input
struct by a single struct to simplify passing it around and to
userspace.
o Add an i8042_restore_ctr command line option. This allows not
restoring the CTR value after an AUX write by default, which breaks
Transmeta Crusoe i8042 chip emulation. The option might be needed
on some ancient hardware, though.
o Fox a typo in input documentation. Patch by Pavel Machek
o Remove duplicately defined keys in input.h that got there as a part
o Osamu Tomita <[email protected]>
o Fix the PS/2 mouse wheel in Explorer PS/2 mode
o Enable the Q40 keyboard only on the Q40 platform
o After some grepping and talking to maintainers, I did the appended
cleanup patch. This should be it from me until char/keyboard.c
becomes a real input layer client, but this final patch will be
_very_ small now :-)).
o The following fixes compilation errors in the Acorn related input
drivers.
o The following patch adds the "resend" capability to the keyboard
driver; when the host driver detects a parity or framing error, we
can ask the keyboard to resend the data, instead of treating random
garbage as valid data.
o This patch adds two new serio input drivers. Both are "UART" type
drivers for PS/2 ports on both StrongARM and ARM Integrator
hardware.
o Apply Rusty's C99 initializer patch to input drivers
o Add a GrIP MultiPort gamepad hub by Brian Bonnlander and Bill
Soudan
o By popular request, and explicit method of telling which events
from a device belong together was implemented - input_sync() and
EV_SYN. Touches every input driver. The first to make use of it is
mousedev.c to properly merge events into PS/2 packets.
o Small cleanup in evdev.c, which copies the data directly from input
struct to userspace.
o Add support for AT keyboards connected over a PS/2 to Serial
converter to atkbd.c - trivial. Remove ps2serkbd, because it's not
needed anymore.
o Because the Linux Input core follows the USB HID standard where it
comes to directions of movement and rotation, a mouse wheel should
be positive where it "rotates forward, away from the user". We had
the opposite in psmouse.c. Fixed this.
o Add EVIOCSABS() ioctl to change the abs* informative values on
input devices. This is something the X peoople really wanted.
I forgot to mention.. You have all been busy little critters, and I
probably missed a number of merges. Give me a day to catch my breath (and
take the kids to the aquarium), and if you think I overlooked or forgot
your patch, you should probably re-send.
Linus
On Fri, 26 Jul 2002 20:12:00 -0700 (PDT)
Linus Torvalds <[email protected]> wrote:
>
> Hmm.. All over the map. IDE patches as usual, USB updates, tons of C99
> named initializers work, ACPI update, fixes from Alan, driverfs race fixes
> and cleanups, SCSI driver fixes from Doug and tons of input layer updates.
>
> Oh, and a new LDM driver, Rusty's CPU hotplug infrastructure
Badly broken on SMP by Linus.
You'll only get one migration thread, and one ksoftirqd.
Issue is that some initcalls (softirq.c and sched.c) are way easier before
other CPUs are brought up, but doing it the other way broke AGP and Linus
decided to call all the initcalls after CPUs are brought up in case someone
else needed it (I still strongly disagree).
This hack fixes it: real fix is the explicit initcall ordering patch,
which Linus hasn't commented on 8(
Name: Hot-plug CPU Boot ksoftirqd and migration fix
Author: Rusty Russell
Status: Tested on 2.5.29, x86 SMP
D: This patch fixes the calls to initialize ksoftirqd and the
D: migration threads. This really should be done by the initcall
D: depends patch.
diff -urNp -I \$.*\$ --exclude TAGS -X /home/rusty/current-dontdiff --minimal linux-2.5.29/init/main.c working-2.5.29/init/main.c
--- linux-2.5.29/init/main.c Sat Jul 27 15:24:39 2002
+++ working-2.5.29/init/main.c Sat Jul 27 16:09:42 2002
@@ -524,6 +524,15 @@ static void __init do_basic_setup(void)
do_initcalls();
}
+static void do_pre_smp_initcalls(void)
+{
+ extern int migration_init(void);
+ extern int spawn_ksoftirqd(void);
+
+ migration_init();
+ spawn_ksoftirqd();
+}
+
extern void prepare_namespace(void);
static int init(void * unused)
@@ -533,6 +542,9 @@ static int init(void * unused)
lock_kernel();
/* Sets up cpus_possible() */
smp_prepare_cpus(max_cpus);
+
+ do_pre_smp_initcalls();
+
smp_init();
do_basic_setup();
diff -urNp -I \$.*\$ --exclude TAGS -X /home/rusty/current-dontdiff --minimal linux-2.5.29/kernel/sched.c working-2.5.29/kernel/sched.c
--- linux-2.5.29/kernel/sched.c Sat Jul 27 15:24:39 2002
+++ working-2.5.29/kernel/sched.c Sat Jul 27 16:21:58 2002
@@ -1894,6 +1894,8 @@ static int migration_call(struct notifie
(long)hcpu);
kernel_thread(migration_thread, hcpu,
CLONE_FS | CLONE_FILES | CLONE_SIGNAL);
+ while (!cpu_rq((long)hcpu)->migration_thread)
+ yield();
break;
}
return NOTIFY_OK;
@@ -1901,7 +1903,7 @@ static int migration_call(struct notifie
static struct notifier_block migration_notifier = { &migration_call, NULL, 0 };
-int __init migration_init(void)
+__init int migration_init(void)
{
/* Start one for boot CPU. */
migration_call(&migration_notifier, CPU_ONLINE,
@@ -1910,7 +1912,6 @@ int __init migration_init(void)
return 0;
}
-__initcall(migration_init);
#endif
extern void init_timervecs(void);
diff -urNp -I \$.*\$ --exclude TAGS -X /home/rusty/current-dontdiff --minimal linux-2.5.29/kernel/softirq.c working-2.5.29/kernel/softirq.c
--- linux-2.5.29/kernel/softirq.c Sat Jul 27 15:24:39 2002
+++ working-2.5.29/kernel/softirq.c Sat Jul 27 16:07:53 2002
@@ -410,11 +410,9 @@ static int __devinit cpu_callback(struct
static struct notifier_block cpu_nfb = { &cpu_callback, NULL, 0 };
-static __init int spawn_ksoftirqd(void)
+__init int spawn_ksoftirqd(void)
{
cpu_callback(&cpu_nfb, CPU_ONLINE, (void *)smp_processor_id());
register_cpu_notifier(&cpu_nfb);
return 0;
}
-
-__initcall(spawn_ksoftirqd);
--
there are those who do and those who hang on and you don't see too
many doers quoting their contemporaries. -- Larry McVoy
In message <[email protected]> you write:
> While you're there, this register_cpu_notifier() call
> generates a compile warning on UP:
>
> softirq.c: In function `spawn_ksoftirqd':
> softirq.c:416: warning: statement with no effect
Thanks Andrew...
Name: Hot-plug CPU notifier warning fix
Author: Rusty Russell
Status: Trivial
D: As pointed out by Andrew Morton, this fixes:
D: softirq.c: In function `spawn_ksoftirqd':
D: softirq.c:416: warning: statement with no effect
This patch alters the boot sequence to "plug in" each CPU, one at a
diff -urpN -I \$.*\$ --exclude TAGS -X /home/rusty/devel/kernel/kernel-patches/current-dontdiff --minimal linux-2.5.29/include/linux/smp.h working-2.5.29-register-cpu-fix/include/linux/smp.h
--- linux-2.5.29/include/linux/smp.h Sat Jul 27 15:24:39 2002
+++ working-2.5.29-register-cpu-fix/include/linux/smp.h Sat Jul 27 17:10:04 2002
@@ -101,9 +101,13 @@ static inline void smp_send_reschedule_a
#define this_cpu(var) var
/* Need to know about CPUs going up/down? */
-#define register_cpu_notifier(nb) 0
-#define unregister_cpu_notifier(nb) do { } while(0)
-
+static inline int register_cpu_notifier(struct notifier_block *nb)
+{
+ return 0;
+}
+static inline void unregister_cpu_notifier(struct notifier_block *nb)
+{
+}
#endif /* !SMP */
#define get_cpu() ({ preempt_disable(); smp_processor_id(); })
--
Anyone who quotes me in their sig is an idiot. -- Rusty Russell.
2.5.27 and 2.5.28 wouldn't boot at all (they hung at ide probe). 2.5.29
boots, but oopses after freeing unused memory.
Again, root = hdc = cdrom with ext2 fs on it.
HW is vmware, which may be the cause of the problem (but frankly I don't
dare to run 2.5 on real hw at this point :).
<...>
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 4096 bind 8192)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
ds: no socket drivers loaded!
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 216k freed
Unable to handle kernel paging request at virtual address 645f00ad
c013f646
*pde = 00000000
Oops: 0000
CPU: 0
EIP: 0010:[<c013f646>] Not tainted
Using defaults from ksymoops -t elf32-i386 -a i386
EFLAGS: 00000246
eax: 00000000 ebx: c109d138 ecx: c109d138 edx: c109d138
esi: 00000000 edi: 645f0065 ebp: c10cda68 esp: c10cda0c
ds: 0018 es: 0018 ss: 0018
Stack: 00000002 00000060 fffffff5 00000000 c3ee1090 000224b3 00000000 00000000
000001d0 c10cda50 00112538 645f0065 c11e2620 0000000c c10cda54 c01a68ce
0000000c 00000000 c10cda68 c015923c c109d138 00000000 0000000c c10cdaf8
Call Trace: [<c01a68ce>] [<c015923c>] [<c0159512>] [<c0168c10>] [<c017a136>]
[<c017a16f>] [<c012a457>] [<c0159675>] [<c0168c10>] [<c0168e57>] [<c0168c10>]
[<c0138d26>] [<c0138e06>] [<c0138ecc>] [<c012ab54>] [<c012adb0>] [<c012afa8>]
[<c012adb0>] [<c0144db1>] [<c0144e36>] [<c015bda7>] [<c0107afb>] [<c0138ecc>]
[<c012ac98>] [<c0131ba1>] [<c015b1c0>] [<c0145624>] [<c01459ae>] [<c0107c1d>]
[<c01094df>] [<c0105147>] [<c0105000>] [<c01076be>] [<c0105060>]
Code: 8b 5f 48 c7 45 c4 01 00 00 00 8b 7d 08 88 d9 d3 65 c4 8b 47
>>EIP; c013f646 <block_read_full_page+36/2b0> <=====
Trace; c01a68ce <submit_bio+3e/80>
Trace; c015923c <mpage_bio_submit+3c/50>
Trace; c0159512 <do_mpage_readpage+222/2c0>
Trace; c0168c10 <ext2_get_block+0/1e0>
Trace; c017a136 <radix_tree_reserve+e6/100>
Trace; c017a16f <radix_tree_insert+1f/40>
Trace; c012a457 <add_to_page_cache+c7/f0>
Trace; c0159675 <mpage_readpages+c5/d0>
Trace; c0168c10 <ext2_get_block+0/1e0>
Trace; c0168e57 <ext2_readpages+27/30>
Trace; c0168c10 <ext2_get_block+0/1e0>
Trace; c0138d26 <read_pages+96/a0>
Trace; c0138e06 <do_page_cache_readahead+d6/130>
Trace; c0138ecc <page_cache_readahead+6c/180>
Trace; c012ab54 <do_generic_file_read+84/2e0>
Trace; c012adb0 <file_read_actor+0/a0>
Trace; c012afa8 <generic_file_read+158/180>
Trace; c012adb0 <file_read_actor+0/a0>
Trace; c0144db1 <open_exec+c1/e0>
Trace; c0144e36 <kernel_read+66/70>
Trace; c015bda7 <load_elf_binary+be7/c50>
Trace; c0107afb <__switch_to+10b/110>
Trace; c0138ecc <page_cache_readahead+6c/180>
Trace; c012ac98 <do_generic_file_read+1c8/2e0>
Trace; c0131ba1 <rmqueue+2b1/2f0>
Trace; c015b1c0 <load_elf_binary+0/c50>
Trace; c0145624 <search_binary_handler+94/210>
Trace; c01459ae <do_execve+20e/230>
Trace; c0107c1d <sys_execve+4d/80>
Trace; c01094df <syscall_call+7/b>
Trace; c0105147 <init+e7/1a0>
Trace; c0105000 <_stext+0/0>
Trace; c01076be <kernel_thread+2e/40>
Trace; c0105060 <init+0/1a0>
Code; c013f646 <block_read_full_page+36/2b0>
00000000 <_EIP>:
Code; c013f646 <block_read_full_page+36/2b0> <=====
0: 8b 5f 48 mov 0x48(%edi),%ebx <=====
Code; c013f649 <block_read_full_page+39/2b0>
3: c7 45 c4 01 00 00 00 movl $0x1,0xffffffc4(%ebp)
Code; c013f650 <block_read_full_page+40/2b0>
a: 8b 7d 08 mov 0x8(%ebp),%edi
Code; c013f653 <block_read_full_page+43/2b0>
d: 88 d9 mov %bl,%cl
Code; c013f655 <block_read_full_page+45/2b0>
f: d3 65 c4 shll %cl,0xffffffc4(%ebp)
Code; c013f658 <block_read_full_page+48/2b0>
12: 8b 47 00 mov 0x0(%edi),%eax
<0>Kernel panic: Attempted to kill init!
-- v --
[email protected]
On Sat, Jul 27, 2002 at 12:06:26PM +0300, you [Ville Herva] wrote:
> 2.5.27 and 2.5.28 wouldn't boot at all (they hung at ide probe). 2.5.29
> boots, but oopses after freeing unused memory.
>
> Again, root = hdc = cdrom with ext2 fs on it.
>
> HW is vmware, which may be the cause of the problem (but frankly I don't
> dare to run 2.5 on real hw at this point :).
>
>
> <...>
> NET4: Linux TCP/IP 1.0 for NET4.0
> IP Protocols: ICMP, UDP, TCP, IGMP
> IP: routing cache hash table of 512 buckets, 4Kbytes
> TCP: Hash tables configured (established 4096 bind 8192)
> NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
> ds: no socket drivers loaded!
> VFS: Mounted root (ext2 filesystem) readonly.
> Freeing unused kernel memory: 216k freed
> Unable to handle kernel paging request at virtual address 645f00ad
> c013f646
> *pde = 00000000
That was with gcc (GCC) 3.1 20020620. With 2.96.110, I get this:
<...>
TCP: Hash tables configured (established 4096 bind 8192)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
ds: no socket drivers loaded!
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 216k freed
Unable to handle kernel paging request at virtual address 645f00ad
c013f646
*pde = 00000000
Oops: 0000
CPU: 0
EIP: 0010:[<c013f646>] Not tainted
Using defaults from ksymoops -t elf32-i386 -a i386
EFLAGS: 00000246
eax: 00000000 ebx: c109d138 ecx: c109d138 edx: c109d138
esi: 00000000 edi: 645f0065 ebp: c10cda68 esp: c10cda0c
ds: 0018 es: 0018 ss: 0018
Stack: 00000002 00000060 fffffff5 00000000 c3ee1090 000224b3 00000000 00000000
000001d0 c10cda50 00112538 645f0065 c11e2620 0000000c c10cda54 c01a68ce
0000000c 00000000 c10cda68 c015923c c109d138 00000000 0000000c c10cdaf8
Call Trace: [<c01a68ce>] [<c015923c>] [<c0159512>] [<c0168c10>] [<c017a136>]
[<c017a16f>] [<c012a457>] [<c0159675>] [<c0168c10>] [<c0168e57>] [<c0168c10>]
[<c0138d26>] [<c0138e06>] [<c0138ecc>] [<c012ab54>] [<c012adb0>] [<c012afa8>]
[<c012adb0>] [<c0144db1>] [<c0144e36>] [<c015bda7>] [<c0107afb>] [<c0138ecc>]
[<c012ac98>] [<c0131ba1>] [<c015b1c0>] [<c0145624>] [<c01459ae>] [<c0107c1d>]
[<c01094df>] [<c0105147>] [<c0105000>] [<c01076be>] [<c0105060>]
Code: 8b 5f 48 c7 45 c4 01 00 00 00 8b 7d 08 88 d9 d3 65 c4 8b 47
>>EIP; c013f646 <real_lookup+56/d0> <=====
Trace; c01a68ce <ray_interrupt+de/280>
Trace; c015923c <msdos_partition+1dc/320>
Trace; c0159512 <driverfs_get_inode+72/f0>
Trace; c0168c10 <shm_close+60/e0>
Trace; c017a136 <uart_line_info+6/340>
Trace; c017a16f <uart_line_info+3f/340>
Trace; c012a457 <__kmem_cache_shrink+27/b0>
Trace; c0159675 <driverfs_symlink+15/b0>
Trace; c0168c10 <shm_close+60/e0>
Trace; c0168e57 <newseg+117/170>
Trace; c0168c10 <shm_close+60/e0>
Trace; c0138d26 <__block_commit_write+66/b0>
Trace; c0138e06 <block_read_full_page+96/270>
Trace; c0138ecc <block_read_full_page+15c/270>
Trace; c012ab54 <kfree+44/c0>
Trace; c012adb0 <kmem_cache_reap+1a0/230>
Trace; c012afa8 <s_show+a8/1e0>
Trace; c012adb0 <kmem_cache_reap+1a0/230>
Trace; c0144db1 <fifo_open+1d1/2bd>
Trace; c0144e36 <fifo_open+256/2bd>
Trace; c015bda7 <ext2_set_link+57/e0>
Trace; c0107afb <__down_trylock+3b/50>
Trace; c0138ecc <block_read_full_page+15c/270>
Trace; c012ac98 <kmem_cache_reap+88/230>
Trace; c0131ba1 <bounce_end_io_write+61/90>
Trace; c015b1c0 <ext2_new_block+4f0/740>
Trace; c0145624 <locks_delete_lock+94/d0>
Trace; c01459ae <locks_mandatory_locked+1e/80>
Trace; c0107c1d <sys_sigsuspend+dd/e0>
Trace; c01094df <do_device_not_available+f/80>
Trace; c0105147 <init+f7/190>
Trace; c0105000 <_stext+0/0>
Trace; c01076be <get_wchan+1e/70>
Trace; c0105060 <init+10/190>
Code; c013f646 <real_lookup+56/d0>
00000000 <_EIP>:
Code; c013f646 <real_lookup+56/d0> <=====
0: 8b 5f 48 mov 0x48(%edi),%ebx <=====
Code; c013f649 <real_lookup+59/d0>
3: c7 45 c4 01 00 00 00 movl $0x1,0xffffffc4(%ebp)
Code; c013f650 <real_lookup+60/d0>
a: 8b 7d 08 mov 0x8(%ebp),%edi
Code; c013f653 <real_lookup+63/d0>
d: 88 d9 mov %bl,%cl
Code; c013f655 <real_lookup+65/d0>
f: d3 65 c4 shll %cl,0xffffffc4(%ebp)
Code; c013f658 <real_lookup+68/d0>
12: 8b 47 00 mov 0x0(%edi),%eax
<0>Kernel panic: Attempted to kill init!
-- v --
[email protected]
Linus Torvalds <[email protected]> writes:
> <[email protected]>:
> o New LDM Driver (Windows Dynamic Disks)
Breaks "make xconfig". Here is a patch to fix it:
--- linux/fs/partitions/Config.in.orig Sat Jul 27 13:31:54 2002
+++ linux/fs/partitions/Config.in Sat Jul 27 13:16:15 2002
@@ -25,7 +25,7 @@
bool ' Solaris (x86) partition table support' CONFIG_SOLARIS_X86_PARTITION
bool ' Unixware slices support' CONFIG_UNIXWARE_DISKLABEL
fi
- dep_bool ' Windows Logical Disk Manager (Dynamic Disk) support' CONFIG_LDM_PARTITION
+ bool ' Windows Logical Disk Manager (Dynamic Disk) support' CONFIG_LDM_PARTITION
if [ "$CONFIG_LDM_PARTITION" = "y" ]; then
bool ' Windows LDM extra logging' CONFIG_LDM_DEBUG
fi
--
Peter Osterlund - [email protected]
http://w1.894.telia.com/~u89404340