config script fix
defconfig update
Makefile update
add H8S archtecture support
--
Yoshinori Sato
<[email protected]>
diff -Nru linux-2.6.0-test2/arch/h8300/Kconfig linux-2.6.0-test2-h8300/arch/h8300/Kconfig
--- linux-2.6.0-test2/arch/h8300/Kconfig 2003-07-14 15:00:22.000000000 +0900
+++ linux-2.6.0-test2-h8300/arch/h8300/Kconfig 2003-07-28 12:40:08.000000000 +0900
@@ -29,6 +29,9 @@
bool
default n
+config ISA
+ bool
+ default y
source "init/Kconfig"
@@ -67,6 +70,21 @@
More Information.
arch/h8300/Doc/simulator.txt
+config H8S_EDOSK2674
+ bool "EDOSK-2674"
+ help
+ Renesas EDOSK-2674R Evalution Board Support
+ More Information.
+ <http://www.azpower.com/H8-uClinux/index.html>
+ <http://www.eu.renesas.com/tools/edk/support/edosk2674.html>
+
+config H8S_SIM
+ bool "H8S Simulator"
+ help
+ GDB Simulator Support
+ More Information.
+ arch/h8300/Doc/simulator.txt
+
endchoice
choice
@@ -88,6 +106,10 @@
bool "H8/3065,3066,3067,3068,3069"
depends on (H8300H_GENERIC || H8300H_AKI3068NET || H8300H_H8MAX)
+config H8S2678
+ bool "H8S/2670,2673,2674R,2675,2676"
+ depends on (H8S_GENERIC || H8S_EDOSK2674 || H8S_SIM)
+
endchoice
config CPU_H8300H
@@ -95,12 +117,20 @@
depends on (H8300H_GENERIC || H8300H_AKI3068NET || H8300H_H8MAX || H8300H_SIM)
default y
+config CPU_H8S
+ bool
+ depends on (H8S_GENERIC || H8S_EDOSK2674 || H8S_SIM)
+ default y
+
config CPU_CLOCK
int "CPU Clock Frequency (/1KHz)"
default "20000" if H8300H_AKI3068NET
default "25000" if H8300H_H8MAX
default "16000" if H8300H_SIM
default "16000" if H8300H_GENERIC
+ default "33000" if H8S_GENERIC
+ default "33000" if H8S_SIM
+ default "33000" if H8S_EDOSK2674
help
CPU Clock Frequency divide to 1000
choice
@@ -121,15 +151,28 @@
endchoice
config DEFAULT_CMDLINE
- bool
+ bool "Use buildin commandline"
+ default n
help
buildin kernel commandline enabled.
config KERNEL_COMMAND
- string
+ string "Buildin commmand string"
+ depends on DEFAULT_CMDLINE
help
buildin kernel commandline strings.
+config BLKDEV_RESERVE
+ bool "BLKDEV Reserved Memory"
+ default n
+ help
+ Reserved BLKDEV area.
+
+config CONFIG_BLKDEV_RESERVE_ADDRESS
+ hex 'start address'
+ depends on BLKDEV_RESERVE
+ help
+ BLKDEV start address.
endmenu
menu "Executable file formats"
@@ -153,43 +196,6 @@
source "net/Kconfig"
-
-menu "Network device support"
- depends on NET
-
-config NETDEVICES
- bool "Network device support"
- ---help---
- You can say N here if you don't intend to connect your Linux box to
- any other computer at all or if all your connections will be over a
- telephone line with a modem either via UUCP (UUCP is a protocol to
- forward mail and news between unix hosts over telephone lines; read
- the UUCP-HOWTO, available from
- <http://www.tldp.org/docs.html#howto>) or dialing up a shell
- account or a BBS, even using term (term is a program which gives you
- almost full Internet connectivity if you have a regular dial up
- shell account on some Internet connected Unix computer. Read
- <http://www.bart.nl/~patrickr/term-howto/Term-HOWTO.html>).
-
- You'll have to say Y if your computer contains a network card that
- you want to use under Linux (make sure you know its name because you
- will be asked for it and read the Ethernet-HOWTO (especially if you
- plan to use more than one network card under Linux)) or if you want
- to use SLIP (Serial Line Internet Protocol is the protocol used to
- send Internet traffic over telephone lines or null modem cables) or
- CSLIP (compressed SLIP) or PPP (Point to Point Protocol, a better
- and newer replacement for SLIP) or PLIP (Parallel Line Internet
- Protocol is mainly used to create a mini network by connecting the
- parallel ports of two local machines) or AX.25/KISS (protocol for
- sending Internet traffic over amateur radio links).
-
- Make sure to read the NET-3-HOWTO. Eventually, you will have to read
- Olaf Kirch's excellent and free book "Network Administrator's
- Guide", to be found in <http://www.tldp.org/docs.html#guide>. If
- unsure, say Y.
-
-endmenu
-
source "net/ax25/Kconfig"
source "net/irda/Kconfig"
@@ -379,7 +385,7 @@
config GDB_MAGICPRINT
bool "Message Output for GDB MagicPrint service"
- depends on H8300H_SIM
+ depends on (H8300H_SIM || H8S_SIM)
help
kernel messages output useing MagicPrint service from GDB
@@ -390,13 +396,13 @@
config GDB_DEBUG
bool "Use gdb stub"
- depends on !H8300H_SIM
+ depends on (!H8300H_SIM && H8S_SIM)
help
gdb stub exception support
config CONFIG_SH_STANDARD_BIOS
bool "Use gdb protocol serial console"
- depends on !H8300H_SIM
+ depends on (!H8300H_SIM && H8S_SIM)
help
serial console output using GDB protocol.
Require eCos/RedBoot
diff -Nru linux-2.6.0-test2/arch/h8300/defconfig linux-2.6.0-test2-h8300/arch/h8300/defconfig
--- linux-2.6.0-test2/arch/h8300/defconfig 2003-07-14 15:00:22.000000000 +0900
+++ linux-2.6.0-test2-h8300/arch/h8300/defconfig 2003-07-14 15:17:52.000000000 +0900
@@ -7,6 +7,7 @@
CONFIG_UID16=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
+CONFIG_ISA=y
#
# Code maturity level options
@@ -20,7 +21,9 @@
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_SYSCTL is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_IKCONFIG is not set
+CONFIG_EMBEDDED=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
#
# Loadable module support
@@ -42,19 +45,76 @@
CONFIG_CPU_CLOCK=16000
# CONFIG_RAMKERNEL is not set
CONFIG_ROMKERNEL=y
+# CONFIG_DEFAULT_CMDLINE is not set
#
# Executable file formats
#
CONFIG_KCORE_AOUT=y
CONFIG_BINFMT_FLAT=y
+# CONFIG_BINFMT_ZFLAT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Memory Technology Devices (MTD)
+#
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_CONCAT is not set
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_RAM=y
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+# CONFIG_MTD_OBSOLETE_CHIPS is not set
+
+#
+# Mapping drivers for chip access
+#
+CONFIG_MTD_UCLINUX=y
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLKMTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC1000 is not set
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+
+#
+# NAND Flash Device Drivers
+#
+# CONFIG_MTD_NAND is not set
#
# Block devices
#
# CONFIG_BLK_DEV_FD is not set
+# CONFIG_BLK_DEV_XD is not set
# CONFIG_BLK_DEV_LOOP is not set
# CONFIG_BLK_DEV_RAM is not set
+# CONFIG_BLK_DEV_INITRD is not set
#
# ATA/IDE/MFM/RLL support
@@ -156,6 +216,8 @@
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
+# CONFIG_JFFS_FS is not set
+# CONFIG_JFFS2_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
@@ -180,8 +242,8 @@
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_HIGHPROFILE is not set
CONFIG_NO_KERNEL_MSG=y
-# CONFIG_GDB_MAGICPRINT is not set
-# CONFIG_SYSCALL_PRINT is not set
+CONFIG_GDB_MAGICPRINT=y
+CONFIG_SYSCALL_PRINT=y
#
# Security options
diff -Nru linux-2.6.0-test2/arch/h8300/vmlinux.lds.S linux-2.6.0-test2-h8300/arch/h8300/vmlinux.lds.S
--- linux-2.6.0-test2/arch/h8300/vmlinux.lds.S 2003-07-14 15:00:22.000000000 +0900
+++ linux-2.6.0-test2-h8300/arch/h8300/vmlinux.lds.S 2003-07-28 12:40:08.000000000 +0900
@@ -36,3 +36,143 @@
#endif
#endif
+#ifdef CONFIG_H8S_SIM
+#ifdef CONFIG_ROMKERNEL
+#include "platform/h8s/generic/rom.ld"
+#endif
+#ifdef CONFIG_RAMKERNEL
+#include "platform/h8s/generic/ram.ld"
+#endif
+#endif
+
+#ifdef CONFIG_H8S_EDOSK2674
+#ifdef CONFIG_ROMKERNEL
+#include "platform/h8s/edosk2674/rom.ld"
+#endif
+#ifdef CONFIG_RAMKERNEL
+#include "platform/h8s/edosk2674/ram.ld"
+#endif
+#endif
+
+_jiffies = _jiffies_64 + 4;
+
+SECTIONS
+{
+#if defined(CONFIG_ROMKERNEL)
+ .vectors :
+ {
+ __vector = . ;
+ *(.vectors*)
+ } > vector
+#endif
+#if defined(CONFIG_RAMKERNEL)
+ .bootvec :
+ {
+ *(.bootvec)
+ } > ram
+#endif
+ .text :
+ {
+#if defined(CONFIG_ROMKERNEL)
+ *(.int_redirect)
+#endif
+ __stext = . ;
+ *(.text)
+ . = ALIGN(0x4) ;
+ *(.exit.text)
+ *(.text.*)
+ . = ALIGN(0x4) ;
+ *(.exitcall.exit)
+ . = ALIGN(0x4) ;
+ *(.kstrtab)
+ . = ALIGN(0x4) ;
+ *(.rodata*)
+ . = ALIGN(16); /* Exception table */
+ ___start___ex_table = .;
+ *(__ex_table)
+ ___stop___ex_table = .;
+
+ ___start___ksymtab = .; /* Kernel symbol table */
+ *(__ksymtab)
+ ___stop___ksymtab = .;
+
+ . = ALIGN(0x4) ;
+ __etext = . ;
+#if defined(CONFIG_ROMKERNEL)
+ } > rom
+#endif
+#if defined(CONFIG_RAMKERNEL)
+ } > ram
+#endif
+ .data : AT( ADDR(.text)+SIZEOF(.text))
+ {
+ __sdata = . ;
+ ___data_start = . ;
+
+ . = ALIGN(0x2000) ;
+ *(.data.init_task)
+ . = ALIGN(0x4) ;
+ *(.data)
+ . = ALIGN(0x4) ;
+ *(.data.*)
+
+ . = ALIGN(0x4) ;
+ ___init_begin = .;
+ __sinittext = .;
+ *(.init.text)
+ __einittext = .;
+ *(.init.data)
+ . = ALIGN(0x4) ;
+ ___setup_start = .;
+ *(.init.setup)
+ . = ALIGN(0x4) ;
+ ___setup_end = .;
+ ___start___param = .;
+ *(__param)
+ ___stop___param = .;
+ ___initcall_start = .;
+ *(.initcall1.init)
+ *(.initcall2.init)
+ *(.initcall3.init)
+ *(.initcall4.init)
+ *(.initcall5.init)
+ *(.initcall6.init)
+ *(.initcall7.init)
+ ___initcall_end = .;
+ ___con_initcall_start = .;
+ *(.con_initcall.init)
+ ___con_initcall_end = .;
+ . = ALIGN(4);
+ ___initramfs_start = .;
+ *(.init.ramfs)
+ ___initramfs_end = .;
+ . = ALIGN(0x4) ;
+ ___init_end = .;
+ __edata = . ;
+ } > ram
+ __begin_data = LOADADDR(.data) ;
+#if defined(CONFIG_ROMKERNEL)
+ .erom :
+ {
+ __erom = . ;
+ } > erom
+#endif
+ .bss :
+ {
+ . = ALIGN(0x4) ;
+ __sbss = . ;
+ *(.bss*)
+ . = ALIGN(0x4) ;
+ *(COMMON)
+ . = ALIGN(0x4) ;
+ __ebss = . ;
+ __end = . ;
+ __ramstart = .;
+ } > ram
+ .dummy :
+ {
+ COMMAND_START = . - 0x200 ;
+ __ramend = . ;
+ } > eram
+}
+
diff -Nru linux-2.6.0-test2/arch/h8300/Makefile linux-2.6.0-test2-h8300/arch/h8300/Makefile
--- linux-2.6.0-test2/arch/h8300/Makefile 2003-07-28 10:31:02.000000000 +0900
+++ linux-2.6.0-test2-h8300/arch/h8300/Makefile 2003-07-28 12:40:08.000000000 +0900
@@ -12,33 +12,40 @@
endif
platform-$(CONFIG_CPU_H8300H) := h8300h
+platform-$(CONFIG_CPU_H8S) := h8s
PLATFORM := $(platform-y)
board-$(CONFIG_H8300H_GENERIC) := generic
-board-$(CONFIG_H8300H_AKI3068NET) := ucsimm
-board-$(CONFIG_H8300H_H8MAX) := ucdimm
+board-$(CONFIG_H8300H_AKI3068NET) := aki3068net
+board-$(CONFIG_H8300H_H8MAX) := h8max
board-$(CONFIG_H8300H_SIM) := generic
+board-$(CONFIG_H8S_GENERIC) := generic
+board-$(CONFIG_H8S_EDOSK2674) := edosk2674
+board-$(CONFIG_H8S_SIM) := generic
BOARD := $(board-y)
model-$(CONFIG_RAMKERNEL) := ram
model-$(CONFIG_ROMKERNEL) := rom
MODEL := $(model-y)
-cflags-$(CONFIG_CPU_H8300H) := -mh
+cflags-$(CONFIG_CPU_H8300H) := -mh
ldflags-$(CONFIG_CPU_H8300H) := -mh8300helf
+cflags-$(CONFIG_CPU_H8S) := -ms
+ldflags-$(CONFIG_CPU_H8S) := -mh8300self
CFLAGS += $(cflags-y)
-CFLAGS += -mint32 -fno-builtin
-CFLAGS += -O2 -g
+CFLAGS += -mint32 -fno-builtin -Os
+CFLAGS += -g
CFLAGS += -D__linux__
CFLAGS += -DUTS_SYSNAME=\"uClinux\" -DTARGET=$(BOARD)
AFLAGS += -DPLATFORM=$(PLATFORM) -DTARGET=$(BOARD) -DMODEL=$(MODEL) $(cflags-y)
LDFLAGS += $(ldflags-y)
CROSS_COMPILE = h8300-elf-
-#HEAD := arch/$(ARCH)/platform/$(platform-y)/$(board-y)/crt0_$(model-y).o
LIBGCC := $(shell $(CROSS-COMPILE)$(CC) $(CFLAGS) -print-libgcc-file-name)
+head-y := arch/$(ARCH)/platform/$(platform-y)/$(board-y)/crt0_$(model-y).o
+
core-y += arch/$(ARCH)/kernel/ \
arch/$(ARCH)/mm/ \
arch/$(ARCH)/platform/$(PLATFORM)/ \
@@ -58,3 +65,16 @@
include/asm-$(ARCH)/asm-offsets.h: arch/$(ARCH)/kernel/asm-offsets.s \
include/asm include/linux/version.h
$(call filechk,gen-asm-offsets)
+
+vmlinux.bin: vmlinux
+ $(OBJCOPY) -Obinary $< $@
+
+vmlinux.srec: vmlinux
+ $(OBJCOPY) -Osrec $< $@
+
+define archhelp
+ echo 'vmlinux.bin - Create raw binary'
+ echo 'vmlinux.srec - Create srec binary'
+endef
+
+CLEAN_FILES += arch/$(ARCH)/vmlinux.bin arch/$(ARCH)/vmlinux.srec
On Mon, Jul 28, 2003 at 11:18:23PM +0900, Yoshinori Sato wrote:
> BOARD := $(board-y)
There is no need for renaming this variable, it is only reference three
times, so board-y would be fine.
Same goes for MODEL.
> +
> +vmlinux.bin: vmlinux
> + $(OBJCOPY) -Obinary $< $@
> +
> +vmlinux.srec: vmlinux
> + $(OBJCOPY) -Osrec $< $@
The above is more suited for a seperate boot/ directory.
Example:
boot := arch/$(ARCH)/boot
vmlinux.srec vmlinux.bin: vmlinux
$(Q)$(MAKE) $(build)=$(boot) $(boot)/$@
archclean:
$(Q)$(MAKE) $(clean)=$(boot)
(The current archclean rule is plain wrong).
And in boot/Makefile
OBJCOPYFLAGS_vmlinux.srec := -Osrec
OBJCOPYFLAGS_vmlinux.bin := -Obinary
$(obj)/vmlinux.srec $(obj)/vmlinux.bin: vmlinux FORCE
$(call if_changed,objcopy)
@echo ' Kernel: $@ is ready'
targets += vmlinux.srec vmlinux.bin
> +
> +define archhelp
> + echo 'vmlinux.bin - Create raw binary'
> + echo 'vmlinux.srec - Create srec binary'
> +endef
OK - shall stay in arch/$(ARCH)/Makefile
> +
> +CLEAN_FILES += arch/$(ARCH)/vmlinux.bin arch/$(ARCH)/vmlinux.srec
Replaced by targets assignment in boot/Makefile.
But you shall add files related to asm-offsets:
CLEAN_FILES += include/asm-$(ARCH)/asm-offsets.h
Sam
At Tue, 29 Jul 2003 21:20:56 +0200,
Sam Ravnborg wrote:
>
> On Mon, Jul 28, 2003 at 11:18:23PM +0900, Yoshinori Sato wrote:
> > BOARD := $(board-y)
>
> There is no need for renaming this variable, it is only reference three
> times, so board-y would be fine.
> Same goes for MODEL.
Because use MODEL by selection of rom/ram, cannot use it with this intended use.
Do not need to see it outside, I mean if there is not a problem.
> > +
> > +vmlinux.bin: vmlinux
> > + $(OBJCOPY) -Obinary $< $@
> > +
> > +vmlinux.srec: vmlinux
> > + $(OBJCOPY) -Osrec $< $@
> The above is more suited for a seperate boot/ directory.
>
> Example:
> boot := arch/$(ARCH)/boot
> vmlinux.srec vmlinux.bin: vmlinux
> $(Q)$(MAKE) $(build)=$(boot) $(boot)/$@
>
> archclean:
> $(Q)$(MAKE) $(clean)=$(boot)
>
> (The current archclean rule is plain wrong).
>
>
> And in boot/Makefile
>
> OBJCOPYFLAGS_vmlinux.srec := -Osrec
> OBJCOPYFLAGS_vmlinux.bin := -Obinary
> $(obj)/vmlinux.srec $(obj)/vmlinux.bin: vmlinux FORCE
> $(call if_changed,objcopy)
> @echo ' Kernel: $@ is ready'
>
> targets += vmlinux.srec vmlinux.bin
>
>
> > +
> > +define archhelp
> > + echo 'vmlinux.bin - Create raw binary'
> > + echo 'vmlinux.srec - Create srec binary'
> > +endef
> OK - shall stay in arch/$(ARCH)/Makefile
>
> > +
> > +CLEAN_FILES += arch/$(ARCH)/vmlinux.bin arch/$(ARCH)/vmlinux.srec
>
> Replaced by targets assignment in boot/Makefile.
> But you shall add files related to asm-offsets:
> CLEAN_FILES += include/asm-$(ARCH)/asm-offsets.h
>
> Sam
fixed.
thank you.
--
Yoshinori Sato
<[email protected]>
diff -Nru linux-2.6.0-test2-h8300/arch/h8300/Makefile linux-2.6.0-test2-h8300-makefix/arch/h8300/Makefile
--- linux-2.6.0-test2-h8300/arch/h8300/Makefile 2003-07-28 12:40:08.000000000 +0900
+++ linux-2.6.0-test2-h8300-makefix/arch/h8300/Makefile 2003-07-30 18:42:25.000000000 +0900
@@ -5,7 +5,7 @@
# License. See the file "COPYING" in the main directory of this archive
# for more details.
#
-# (C) Copyright 2002, Yoshinori Sato <[email protected]>
+# (C) Copyright 2002,2003 Yoshinori Sato <[email protected]>
#
ifndef include-config
-include $(TOPDIR)/.config
@@ -37,8 +37,8 @@
CFLAGS += -mint32 -fno-builtin -Os
CFLAGS += -g
CFLAGS += -D__linux__
-CFLAGS += -DUTS_SYSNAME=\"uClinux\" -DTARGET=$(BOARD)
-AFLAGS += -DPLATFORM=$(PLATFORM) -DTARGET=$(BOARD) -DMODEL=$(MODEL) $(cflags-y)
+CFLAGS += -DUTS_SYSNAME=\"uClinux\"
+AFLAGS += -DPLATFORM=$(PLATFORM) -DMODEL=$(MODEL) $(cflags-y)
LDFLAGS += $(ldflags-y)
CROSS_COMPILE = h8300-elf-
@@ -53,28 +53,32 @@
libs-y += arch/$(ARCH)/lib/ $(LIBGCC)
-export MODEL
+boot := arch/h8300/boot
+
+export MODEL PLATFORM
archmrproper:
archclean:
- $(call descend arch/$(ARCH), subdirclean)
+ $(Q)$(MAKE) $(clean)=$(boot)
+
+prepare: include/asm-$(ARCH)/machine-depend.h include/asm-$(ARCH)/asm-offsets.h
-prepare: include/asm-$(ARCH)/asm-offsets.h
+include/asm-$(ARCH)/machine-depend.h: include/asm-$(ARCH)/$(BOARD)/machine-depend.h
+ $(Q)ln -sf $(BOARD)/machine-depend.h \
+ include/asm-$(ARCH)/machine-depend.h
+ @echo ' Create include/asm-$(ARCH)/machine-depend.h'
include/asm-$(ARCH)/asm-offsets.h: arch/$(ARCH)/kernel/asm-offsets.s \
include/asm include/linux/version.h
$(call filechk,gen-asm-offsets)
-vmlinux.bin: vmlinux
- $(OBJCOPY) -Obinary $< $@
-
-vmlinux.srec: vmlinux
- $(OBJCOPY) -Osrec $< $@
+vmlinux.srec vmlinux.bin: vmlinux
+ $(Q)$(MAKE) $(build)=$(boot) $(boot)/$@
define archhelp
echo 'vmlinux.bin - Create raw binary'
echo 'vmlinux.srec - Create srec binary'
endef
-CLEAN_FILES += arch/$(ARCH)/vmlinux.bin arch/$(ARCH)/vmlinux.srec
+CLEAN_FILES += include/asm-$(ARCH)/asm-offsets.h include/asm-$(ARCH)/machine-depend.h
diff -Nru linux-2.6.0-test2-h8300/arch/h8300/boot/Makefile linux-2.6.0-test2-h8300-makefix/arch/h8300/boot/Makefile
--- linux-2.6.0-test2-h8300/arch/h8300/boot/Makefile 1970-01-01 09:00:00.000000000 +0900
+++ linux-2.6.0-test2-h8300-makefix/arch/h8300/boot/Makefile 2003-07-30 19:35:31.000000000 +0900
@@ -0,0 +1,12 @@
+# arch/h8300/boot/Makefile
+
+targets := vmlinux.srec vmlinux.bin
+
+OBCOPYFLAGS_vmlinux.srec := -Osrec
+OBCOPYFLAGS_vmlinux.bin := -Obin
+
+$(obj)/vmlinux.srec $(obj)/vmlinux.bin: vmlinux FORCE
+ $(call if_changed,objcopy)
+ @echo ' Kernel: $@ is ready'
+
+CLEAN_FILES += arch/$(ARCH)/vmlinux.bin arch/$(ARCH)/vmlinux.srec
diff -Nru linux-2.6.0-test2-h8300/include/asm-h8300/aki3068net/machine-depend.h linux-2.6.0-test2-h8300-makefix/include/asm-h8300/aki3068net/machine-depend.h
--- linux-2.6.0-test2-h8300/include/asm-h8300/aki3068net/machine-depend.h 1970-01-01 09:00:00.000000000 +0900
+++ linux-2.6.0-test2-h8300-makefix/include/asm-h8300/aki3068net/machine-depend.h 2003-07-30 18:42:26.000000000 +0900
@@ -0,0 +1,35 @@
+/* AE-3068 board depend header */
+
+/* TIMER rate define */
+#ifdef H8300_TIMER_DEFINE
+#include <linux/config.h>
+#define H8300_TIMER_COUNT_DATA 20000*10/8192
+#define H8300_TIMER_FREQ 20000*1000/8192
+#endif
+
+/* AE-3068 RTL8019AS Config */
+#ifdef H8300_NE_DEFINE
+
+#define NE2000_ADDR 0x200000
+#define NE2000_IRQ 5
+#define NE2000_IRQ_VECTOR (12 + NE2000_IRQ)
+#define NE2000_BYTE volatile unsigned short
+
+#define IER 0xfee015
+#define ISR 0xfee016
+#define IRQ_MASK (1 << NE2000_IRQ)
+
+#define WCRL 0xfee023
+#define MAR0A 0xffff20
+#define ETCR0A 0xffff24
+#define DTCR0A 0xffff27
+#define MAR0B 0xffff28
+#define DTCR0B 0xffff2f
+
+#define H8300_INIT_NE() \
+do { \
+ wordlength = 1; \
+ outb_p(0x48, ioaddr + EN0_DCFG); \
+} while(0)
+
+#endif
diff -Nru linux-2.6.0-test2-h8300/include/asm-h8300/aki3068net/ne.h linux-2.6.0-test2-h8300-makefix/include/asm-h8300/aki3068net/ne.h
--- linux-2.6.0-test2-h8300/include/asm-h8300/aki3068net/ne.h 2003-07-19 21:41:33.000000000 +0900
+++ linux-2.6.0-test2-h8300-makefix/include/asm-h8300/aki3068net/ne.h 1970-01-01 09:00:00.000000000 +0900
@@ -1,28 +0,0 @@
-/* AE-3068 (aka. aki3068net) RTL8019AS Config */
-
-#ifndef __H8300_AKI3068NET_NE__
-#define __H8300_AKI3068NET_NE__
-
-#define NE2000_ADDR 0x200000
-#define NE2000_IRQ 5
-#define NE2000_IRQ_VECTOR (12 + NE2000_IRQ)
-#define NE2000_BYTE volatile unsigned short
-
-#define IER 0xfee015
-#define ISR 0xfee016
-#define IRQ_MASK (1 << NE2000_IRQ)
-
-#define WCRL 0xfee023
-#define MAR0A 0xffff20
-#define ETCR0A 0xffff24
-#define DTCR0A 0xffff27
-#define MAR0B 0xffff28
-#define DTCR0B 0xffff2f
-
-#define H8300_INIT_NE() \
-do { \
- wordlength = 1; \
- outb_p(0x48, ioaddr + EN0_DCFG); \
-} while(0)
-
-#endif
diff -Nru linux-2.6.0-test2-h8300/include/asm-h8300/aki3068net/timer_rate.h linux-2.6.0-test2-h8300-makefix/include/asm-h8300/aki3068net/timer_rate.h
--- linux-2.6.0-test2-h8300/include/asm-h8300/aki3068net/timer_rate.h 2003-07-20 01:19:25.000000000 +0900
+++ linux-2.6.0-test2-h8300-makefix/include/asm-h8300/aki3068net/timer_rate.h 1970-01-01 09:00:00.000000000 +0900
@@ -1,9 +0,0 @@
-#ifndef __H8300_AKI3068NET_TIMER_RATE__
-#define __H8300_AKI3068NET_TIMER_RATE__
-
-#include <linux/config.h>
-
-#define H8300_TIMER_COUNT_DATA CONFIG_CPU_CLOCK*10/8192
-#define H8300_TIMER_FREQ CONFIG_CPU_CLOCK*1000/8192
-
-#endif
diff -Nru linux-2.6.0-test2-h8300/include/asm-h8300/edosk2674/machine-depend.h linux-2.6.0-test2-h8300-makefix/include/asm-h8300/edosk2674/machine-depend.h
--- linux-2.6.0-test2-h8300/include/asm-h8300/edosk2674/machine-depend.h 1970-01-01 09:00:00.000000000 +0900
+++ linux-2.6.0-test2-h8300-makefix/include/asm-h8300/edosk2674/machine-depend.h 2003-07-30 18:42:26.000000000 +0900
@@ -0,0 +1,70 @@
+/* EDOSK2674 board depend header */
+
+/* TIMER rate define */
+#ifdef H8300_TIMER_DEFINE
+#define H8300_TIMER_COUNT_DATA 33000*10/8192
+#define H8300_TIMER_FREQ 33000*1000/8192
+#endif
+
+/* EDOSK-2674R SMSC Network Controler Target Depend impliments */
+#ifdef H8300_SMSC_DEFINE
+
+#define SMSC_BASE 0xf80000
+#define SMSC_IRQ 16
+
+/* sorry quick hack */
+#if defined(outw)
+# undef outw
+#endif
+#define outw(d,a) edosk2674_smsc_outw(d,(volatile unsigned short *)(a))
+#if defined(inw)
+# undef inw
+#endif
+#define inw(a) edosk2674_smsc_inw((volatile unsigned short *)(a))
+#if defined(outsw)
+# undef outsw
+#endif
+#define outsw(a,p,l) edosk2674_smsc_outsw((volatile unsigned short *)(a),p,l)
+#if defined(insw)
+# undef insw
+#endif
+#define insw(a,p,l) edosk2674_smsc_insw((volatile unsigned short *)(a),p,l)
+
+static inline void edosk2674_smsc_outw(
+ unsigned short d,
+ volatile unsigned short *a
+ )
+{
+ *a = (d >> 8) | (d << 8);
+}
+
+static inline unsigned short edosk2674_smsc_inw(
+ volatile unsigned short *a
+ )
+{
+ unsigned short d;
+ d = *a;
+ return (d >> 8) | (d << 8);
+}
+
+static inline void edosk2674_smsc_outsw(
+ volatile unsigned short *a,
+ unsigned short *p,
+ unsigned long l
+ )
+{
+ for (; l != 0; --l, p++)
+ *a = *p;
+}
+
+static inline void edosk2674_smsc_insw(
+ volatile unsigned short *a,
+ unsigned short *p,
+ unsigned long l
+ )
+{
+ for (; l != 0; --l, p++)
+ *p = *a;
+}
+
+#endif
diff -Nru linux-2.6.0-test2-h8300/include/asm-h8300/edosk2674/timer_rate.h linux-2.6.0-test2-h8300-makefix/include/asm-h8300/edosk2674/timer_rate.h
--- linux-2.6.0-test2-h8300/include/asm-h8300/edosk2674/timer_rate.h 2003-07-20 01:18:09.000000000 +0900
+++ linux-2.6.0-test2-h8300-makefix/include/asm-h8300/edosk2674/timer_rate.h 1970-01-01 09:00:00.000000000 +0900
@@ -1,4 +0,0 @@
-#include <linux/config.h>
-
-#define H8300_TIMER_COUNT_DATA CONFIG_CPU_CLOCK*10/8192
-#define H8300_TIMER_FREQ CONFIG_CPU_CLOCK*1000/8192
diff -Nru linux-2.6.0-test2-h8300/include/asm-h8300/generic/machine-depend.h linux-2.6.0-test2-h8300-makefix/include/asm-h8300/generic/machine-depend.h
--- linux-2.6.0-test2-h8300/include/asm-h8300/generic/machine-depend.h 1970-01-01 09:00:00.000000000 +0900
+++ linux-2.6.0-test2-h8300-makefix/include/asm-h8300/generic/machine-depend.h 2003-07-30 18:42:26.000000000 +0900
@@ -0,0 +1,17 @@
+/* machine depend header */
+
+/* TIMER rate define */
+#ifdef H8300_TIMER_DEFINE
+#include <linux/config.h>
+#if defined(CONFIG_H83007) || defined(CONFIG_H83068) || defined(CONFIG_H8S2678)
+#define H8300_TIMER_COUNT_DATA CONFIG_CPU_CLOCK*10/8192
+#define H8300_TIMER_FREQ CONFIG_CPU_CLOCK*1000/8192
+#endif
+
+#if defined(CONFIG_H8_3002) || defined(CONFIG_H83048)
+#define H8300_TIMER_COUNT_DATA CONFIG_CPU_CLOCK*10/8
+#define H8300_TIMER_FREQ CONFIG_CPU_CLOCK*1000/8
+#endif
+
+#endif
+
diff -Nru linux-2.6.0-test2-h8300/include/asm-h8300/generic/timer_rate.h linux-2.6.0-test2-h8300-makefix/include/asm-h8300/generic/timer_rate.h
--- linux-2.6.0-test2-h8300/include/asm-h8300/generic/timer_rate.h 2003-07-19 21:41:33.000000000 +0900
+++ linux-2.6.0-test2-h8300-makefix/include/asm-h8300/generic/timer_rate.h 1970-01-01 09:00:00.000000000 +0900
@@ -1,15 +0,0 @@
-#include <linux/config.h>
-
-#if defined(CONFIG_H83007) || defined(CONFIG_H83068) || defined(CONFIG_H8S2678)
-#define H8300_TIMER_COUNT_DATA CONFIG_CPU_CLOCK*10/8192
-#define H8300_TIMER_FREQ CONFIG_CPU_CLOCK*1000/8192
-#endif
-
-#if defined(H8_3002) || defined(CONFIG_H83048)
-#define H8300_TIMER_COUNT_DATA CONFIG_CPU_CLOCK*10/8
-#define H8300_TIMER_FREQ CONFIG_CPU_CLOCK*1000/8
-#endif
-
-#if !defined(H8300_TIMER_COUNT_DATA)
-#error illigal configuration
-#endif
diff -Nru linux-2.6.0-test2-h8300/include/asm-h8300/h8300_ne.h linux-2.6.0-test2-h8300-makefix/include/asm-h8300/h8300_ne.h
--- linux-2.6.0-test2-h8300/include/asm-h8300/h8300_ne.h 2003-07-14 15:04:49.000000000 +0900
+++ linux-2.6.0-test2-h8300-makefix/include/asm-h8300/h8300_ne.h 2003-07-30 17:41:06.000000000 +0900
@@ -11,9 +11,9 @@
#define h8300ne_h
/****************************************************************************/
-/* Such a description is OK ? */
-#define DEPEND_HEADER(target) <asm/target/ne.h>
-#include DEPEND_HEADER(TARGET)
+#define H8300_NE_DEFINE
+#include <asm/machine-depend.h>
+#undef H8300_NE_DEFINE
/****************************************************************************/
#endif /* h8300ne_h */
diff -Nru linux-2.6.0-test2-h8300/include/asm-h8300/h8max/ide.h linux-2.6.0-test2-h8300-makefix/include/asm-h8300/h8max/ide.h
--- linux-2.6.0-test2-h8300/include/asm-h8300/h8max/ide.h 2003-07-14 15:04:49.000000000 +0900
+++ linux-2.6.0-test2-h8300-makefix/include/asm-h8300/h8max/ide.h 1970-01-01 09:00:00.000000000 +0900
@@ -1,60 +0,0 @@
-/* H8MAX IDE I/F Config */
-
-#define H8300_IDE_BASE 0x200000
-#define H8300_IDE_CTRL 0x60000c
-#define H8300_IDE_IRQ 5
-#define H8300_IDE_REG_OFFSET 2
-
-#undef outb
-#undef inb
-#undef outb_p
-#undef inb_p
-#undef outsw
-#undef insw
-
-#define outb(d,a) h8max_outb(d,(unsigned short *)a)
-#define inb(a) h8max_inb((unsigned char *)a)
-#define outb_p(d,a) h8max_outb(d,(unsigned short *)a)
-#define inb_p(a) h8max_inb((unsigned char *)a)
-#define outsw(addr,buf,len) h8max_outsw(addr,buf,len);
-#define insw(addr,buf,len) h8max_insw(addr,buf,len);
-
-static inline void h8max_outb(unsigned short d,unsigned short *a)
-{
- *a = d;
-}
-
-static inline unsigned char h8max_inb(unsigned char *a)
-{
- return *(a+1);
-}
-
-static inline void h8max_outsw(void *addr, void *buf, int len)
-{
- unsigned volatile short *ap = (unsigned volatile short *)addr;
- unsigned short *bp = (unsigned short *)buf;
- unsigned short d;
- while(len--) {
- d = *bp++;
- *ap = (d >> 8) | (d << 8);
- }
-}
-
-static inline void h8max_insw(void *addr, void *buf, int len)
-{
- unsigned volatile short *ap = (unsigned volatile short *)addr;
- unsigned short *bp = (unsigned short *)buf;
- unsigned short d;
- while(len--) {
- d = *ap;
- *bp++ = (d >> 8) | (d << 8);
- }
-}
-
-static inline void target_ide_fix_driveid(struct hd_driveid *id)
-{
- int c;
- unsigned short *p = (unsigned short *)id;
- for (c = 0; c < SECTOR_WORDS; c++, p++)
- *p = (*p >> 8) | (*p << 8);
-}
diff -Nru linux-2.6.0-test2-h8300/include/asm-h8300/h8max/machine-depend.h linux-2.6.0-test2-h8300-makefix/include/asm-h8300/h8max/machine-depend.h
--- linux-2.6.0-test2-h8300/include/asm-h8300/h8max/machine-depend.h 1970-01-01 09:00:00.000000000 +0900
+++ linux-2.6.0-test2-h8300-makefix/include/asm-h8300/h8max/machine-depend.h 2003-07-30 18:42:26.000000000 +0900
@@ -0,0 +1,167 @@
+/* H8MAX board depend header */
+
+/* TIMER rate define */
+#ifdef H8300_TIMER_DEFINE
+#define H8300_TIMER_COUNT_DATA 25000*10/8192
+#define H8300_TIMER_FREQ 25000*1000/8192
+#endif
+
+/* H8MAX RTL8019AS Config */
+#ifdef H8300_NE_DEFINE
+
+#define NE2000_ADDR 0x800600
+#define NE2000_IRQ 4
+#define NE2000_IRQ_VECTOR (12 + NE2000_IRQ)
+#define NE2000_BYTE volatile unsigned short
+
+#define IER 0xfee015
+#define ISR 0xfee016
+#define IRQ_MASK (1 << NE2000_IRQ)
+/* sorry quick hack */
+#if defined(outb)
+# undef outb
+#endif
+#define outb(d,a) h8max_outb((d),(a) - NE2000_ADDR)
+#if defined(inb)
+# undef inb
+#endif
+#define inb(a) h8max_inb((a) - NE2000_ADDR)
+#if defined(outb_p)
+# undef outb_p
+#endif
+#define outb_p(d,a) h8max_outb((d),(a) - NE2000_ADDR)
+#if defined(inb_p)
+# undef inb_p
+#endif
+#define inb_p(a) h8max_inb((a) - NE2000_ADDR)
+#if defined(outsw)
+# undef outsw
+#endif
+#define outsw(a,p,l) h8max_outsw((a) - NE2000_ADDR,(unsigned short *)p,l)
+#if defined(insw)
+# undef insw
+#endif
+#define insw(a,p,l) h8max_insw((a) - NE2000_ADDR,(unsigned short *)p,l)
+#if defined(outsb)
+# undef outsb
+#endif
+#define outsb(a,p,l) h8max_outsb((a) - NE2000_ADDR,(unsigned char *)p,l)
+#if defined(insb)
+# undef insb
+#endif
+#define insb(a,p,l) h8max_insb((a) - NE2000_ADDR,(unsigned char *)p,l)
+
+#define H8300_INIT_NE() \
+do { \
+ wordlength = 2; \
+ h8max_outb(0x49, ioaddr + EN0_DCFG); \
+ SA_prom[14] = SA_prom[15] = 0x57;\
+} while(0)
+
+static inline void h8max_outb(unsigned char d,unsigned char a)
+{
+ *(unsigned short *)(NE2000_ADDR + (a << 1)) = d;
+}
+
+static inline unsigned char h8max_inb(unsigned char a)
+{
+ return *(unsigned char *)(NE2000_ADDR + (a << 1) +1);
+}
+
+static inline void h8max_outsw(unsigned char a,unsigned short *p,unsigned long l)
+{
+ unsigned short d;
+ for (; l != 0; --l, p++) {
+ d = (((*p) >> 8) & 0xff) | ((*p) << 8);
+ *(unsigned short *)(NE2000_ADDR + (a << 1)) = d;
+ }
+}
+
+static inline void h8max_insw(unsigned char a,unsigned short *p,unsigned long l)
+{
+ unsigned short d;
+ for (; l != 0; --l, p++) {
+ d = *(unsigned short *)(NE2000_ADDR + (a << 1));
+ *p = (d << 8)|((d >> 8) & 0xff);
+ }
+}
+
+static inline void h8max_outsb(unsigned char a,unsigned char *p,unsigned long l)
+{
+ for (; l != 0; --l, p++) {
+ *(unsigned short *)(NE2000_ADDR + (a << 1)) = *p;
+ }
+}
+
+static inline void h8max_insb(unsigned char a,unsigned char *p,unsigned long l)
+{
+ for (; l != 0; --l, p++) {
+ *p = *((unsigned char *)(NE2000_ADDR + (a << 1))+1);
+ }
+}
+
+#endif
+
+/* H8MAX IDE I/F Config */
+#ifdef H8300_IDE_DEFINE
+
+#define H8300_IDE_BASE 0x200000
+#define H8300_IDE_CTRL 0x60000c
+#define H8300_IDE_IRQ 5
+#define H8300_IDE_REG_OFFSET 2
+
+#undef outb
+#undef inb
+#undef outb_p
+#undef inb_p
+#undef outsw
+#undef insw
+
+#define outb(d,a) h8max_outb(d,(unsigned short *)a)
+#define inb(a) h8max_inb((unsigned char *)a)
+#define outb_p(d,a) h8max_outb(d,(unsigned short *)a)
+#define inb_p(a) h8max_inb((unsigned char *)a)
+#define outsw(addr,buf,len) h8max_outsw(addr,buf,len);
+#define insw(addr,buf,len) h8max_insw(addr,buf,len);
+
+static inline void h8max_outb(unsigned short d,unsigned short *a)
+{
+ *a = d;
+}
+
+static inline unsigned char h8max_inb(unsigned char *a)
+{
+ return *(a+1);
+}
+
+static inline void h8max_outsw(void *addr, void *buf, int len)
+{
+ unsigned volatile short *ap = (unsigned volatile short *)addr;
+ unsigned short *bp = (unsigned short *)buf;
+ unsigned short d;
+ while(len--) {
+ d = *bp++;
+ *ap = (d >> 8) | (d << 8);
+ }
+}
+
+static inline void h8max_insw(void *addr, void *buf, int len)
+{
+ unsigned volatile short *ap = (unsigned volatile short *)addr;
+ unsigned short *bp = (unsigned short *)buf;
+ unsigned short d;
+ while(len--) {
+ d = *ap;
+ *bp++ = (d >> 8) | (d << 8);
+ }
+}
+
+static inline void target_ide_fix_driveid(struct hd_driveid *id)
+{
+ int c;
+ unsigned short *p = (unsigned short *)id;
+ for (c = 0; c < SECTOR_WORDS; c++, p++)
+ *p = (*p >> 8) | (*p << 8);
+}
+
+#endif
diff -Nru linux-2.6.0-test2-h8300/include/asm-h8300/h8max/ne.h linux-2.6.0-test2-h8300-makefix/include/asm-h8300/h8max/ne.h
--- linux-2.6.0-test2-h8300/include/asm-h8300/h8max/ne.h 2003-07-19 21:41:33.000000000 +0900
+++ linux-2.6.0-test2-h8300-makefix/include/asm-h8300/h8max/ne.h 1970-01-01 09:00:00.000000000 +0900
@@ -1,97 +0,0 @@
-/* H8MAX RTL8019AS Config */
-
-#ifndef __H8300_H8MAX_NE__
-#define __H8300_H8MAX_NE__
-
-#define NE2000_ADDR 0x800600
-#define NE2000_IRQ 4
-#define NE2000_IRQ_VECTOR (12 + NE2000_IRQ)
-#define NE2000_BYTE volatile unsigned short
-
-#define IER 0xfee015
-#define ISR 0xfee016
-#define IRQ_MASK (1 << NE2000_IRQ)
-/* sorry quick hack */
-#if defined(outb)
-# undef outb
-#endif
-#define outb(d,a) h8max_outb((d),(a) - NE2000_ADDR)
-#if defined(inb)
-# undef inb
-#endif
-#define inb(a) h8max_inb((a) - NE2000_ADDR)
-#if defined(outb_p)
-# undef outb_p
-#endif
-#define outb_p(d,a) h8max_outb((d),(a) - NE2000_ADDR)
-#if defined(inb_p)
-# undef inb_p
-#endif
-#define inb_p(a) h8max_inb((a) - NE2000_ADDR)
-#if defined(outsw)
-# undef outsw
-#endif
-#define outsw(a,p,l) h8max_outsw((a) - NE2000_ADDR,(unsigned short *)p,l)
-#if defined(insw)
-# undef insw
-#endif
-#define insw(a,p,l) h8max_insw((a) - NE2000_ADDR,(unsigned short *)p,l)
-#if defined(outsb)
-# undef outsb
-#endif
-#define outsb(a,p,l) h8max_outsb((a) - NE2000_ADDR,(unsigned char *)p,l)
-#if defined(insb)
-# undef insb
-#endif
-#define insb(a,p,l) h8max_insb((a) - NE2000_ADDR,(unsigned char *)p,l)
-
-#define H8300_INIT_NE() \
-do { \
- wordlength = 2; \
- h8max_outb(0x49, ioaddr + EN0_DCFG); \
- SA_prom[14] = SA_prom[15] = 0x57;\
-} while(0)
-
-static inline void h8max_outb(unsigned char d,unsigned char a)
-{
- *(unsigned short *)(NE2000_ADDR + (a << 1)) = d;
-}
-
-static inline unsigned char h8max_inb(unsigned char a)
-{
- return *(unsigned char *)(NE2000_ADDR + (a << 1) +1);
-}
-
-static inline void h8max_outsw(unsigned char a,unsigned short *p,unsigned long l)
-{
- unsigned short d;
- for (; l != 0; --l, p++) {
- d = (((*p) >> 8) & 0xff) | ((*p) << 8);
- *(unsigned short *)(NE2000_ADDR + (a << 1)) = d;
- }
-}
-
-static inline void h8max_insw(unsigned char a,unsigned short *p,unsigned long l)
-{
- unsigned short d;
- for (; l != 0; --l, p++) {
- d = *(unsigned short *)(NE2000_ADDR + (a << 1));
- *p = (d << 8)|((d >> 8) & 0xff);
- }
-}
-
-static inline void h8max_outsb(unsigned char a,unsigned char *p,unsigned long l)
-{
- for (; l != 0; --l, p++) {
- *(unsigned short *)(NE2000_ADDR + (a << 1)) = *p;
- }
-}
-
-static inline void h8max_insb(unsigned char a,unsigned char *p,unsigned long l)
-{
- for (; l != 0; --l, p++) {
- *p = *((unsigned char *)(NE2000_ADDR + (a << 1))+1);
- }
-}
-
-#endif
diff -Nru linux-2.6.0-test2-h8300/include/asm-h8300/h8max/timer_rate.h linux-2.6.0-test2-h8300-makefix/include/asm-h8300/h8max/timer_rate.h
--- linux-2.6.0-test2-h8300/include/asm-h8300/h8max/timer_rate.h 2003-07-20 01:19:25.000000000 +0900
+++ linux-2.6.0-test2-h8300-makefix/include/asm-h8300/h8max/timer_rate.h 1970-01-01 09:00:00.000000000 +0900
@@ -1,10 +0,0 @@
-#ifndef __H8300_H8MAX_TIMER_RATE__
-#define __H8300_H8MAX_TIMER_RATE__
-
-#include <linux/config.h>
-
-#define H8300_TIMER_COUNT_DATA CONFIG_CPU_CLOCK*10/8192
-#define H8300_TIMER_FREQ CONFIG_CPU_CLOCK*1000/8192
-
-#endif
-
diff -Nru linux-2.6.0-test2-h8300/include/asm-h8300/ide.h linux-2.6.0-test2-h8300-makefix/include/asm-h8300/ide.h
--- linux-2.6.0-test2-h8300/include/asm-h8300/ide.h 2003-07-14 15:04:49.000000000 +0900
+++ linux-2.6.0-test2-h8300-makefix/include/asm-h8300/ide.h 2003-07-30 17:41:06.000000000 +0900
@@ -70,9 +70,10 @@
* Our list of ports/irq's for different boards.
*/
-/* Such a description is OK ? */
-#define DEPEND_HEADER(target) <asm/target/ide.h>
-#include DEPEND_HEADER(TARGET)
+/* machine depend header include */
+#define H8300_IDE_DEFINE
+#include <asm/machine-depend.h>
+#undef H8300_IDE_DEFINE
/****************************************************************************/
diff -Nru linux-2.6.0-test2-h8300/include/asm-h8300/machine-depend.h linux-2.6.0-test2-h8300-makefix/include/asm-h8300/machine-depend.h
--- linux-2.6.0-test2-h8300/include/asm-h8300/machine-depend.h 1970-01-01 09:00:00.000000000 +0900
+++ linux-2.6.0-test2-h8300-makefix/include/asm-h8300/machine-depend.h 2003-07-30 18:42:26.000000000 +0900
@@ -0,0 +1,70 @@
+/* EDOSK2674 board depend header */
+
+/* TIMER rate define */
+#ifdef H8300_TIMER_DEFINE
+#define H8300_TIMER_COUNT_DATA 33000*10/8192
+#define H8300_TIMER_FREQ 33000*1000/8192
+#endif
+
+/* EDOSK-2674R SMSC Network Controler Target Depend impliments */
+#ifdef H8300_SMSC_DEFINE
+
+#define SMSC_BASE 0xf80000
+#define SMSC_IRQ 16
+
+/* sorry quick hack */
+#if defined(outw)
+# undef outw
+#endif
+#define outw(d,a) edosk2674_smsc_outw(d,(volatile unsigned short *)(a))
+#if defined(inw)
+# undef inw
+#endif
+#define inw(a) edosk2674_smsc_inw((volatile unsigned short *)(a))
+#if defined(outsw)
+# undef outsw
+#endif
+#define outsw(a,p,l) edosk2674_smsc_outsw((volatile unsigned short *)(a),p,l)
+#if defined(insw)
+# undef insw
+#endif
+#define insw(a,p,l) edosk2674_smsc_insw((volatile unsigned short *)(a),p,l)
+
+static inline void edosk2674_smsc_outw(
+ unsigned short d,
+ volatile unsigned short *a
+ )
+{
+ *a = (d >> 8) | (d << 8);
+}
+
+static inline unsigned short edosk2674_smsc_inw(
+ volatile unsigned short *a
+ )
+{
+ unsigned short d;
+ d = *a;
+ return (d >> 8) | (d << 8);
+}
+
+static inline void edosk2674_smsc_outsw(
+ volatile unsigned short *a,
+ unsigned short *p,
+ unsigned long l
+ )
+{
+ for (; l != 0; --l, p++)
+ *a = *p;
+}
+
+static inline void edosk2674_smsc_insw(
+ volatile unsigned short *a,
+ unsigned short *p,
+ unsigned long l
+ )
+{
+ for (; l != 0; --l, p++)
+ *p = *a;
+}
+
+#endif
diff -Nru linux-2.6.0-test2-h8300/include/asm-h8300/timex.h linux-2.6.0-test2-h8300-makefix/include/asm-h8300/timex.h
--- linux-2.6.0-test2-h8300/include/asm-h8300/timex.h 2003-07-14 15:04:49.000000000 +0900
+++ linux-2.6.0-test2-h8300-makefix/include/asm-h8300/timex.h 2003-07-30 17:41:06.000000000 +0900
@@ -6,9 +6,9 @@
#ifndef _ASM_H8300_TIMEX_H
#define _ASM_H8300_TIMEX_H
-/* Such a description is OK ? */
-#define TIMEX_DEPEND_HEADER(target) <asm/target/timer_rate.h>
-#include TIMEX_DEPEND_HEADER(TARGET)
+#define H8300_TIMER_DEFINE
+#include <asm/machine-depend.h>
+#undef H8300_TIMER_DEFINE
#define CLOCK_TICK_RATE H8300_TIMER_FREQ
#define CLOCK_TICK_FACTOR 20 /* Factor of both 1000000 and CLOCK_TICK_RATE */