2009-10-26 12:49:44

by Stefan Assmann

Subject: [PATCH] PCI hotplug: use correct term for PCI Express

Change PCI-E to PCIe which is the correct term according to
http://www.pcisig.com/developers/procedures/logos/Trademark_and_Logo_Usage_Guidelines_updated_112206.pdf.

Signed-off-by: Stefan Assmann <[email protected]>

---
diff --git a/drivers/pci/hotplug/pci_hotplug_core.c b/drivers/pci/hotplug/pci_hotplug_core.c
index 0325d98..1286c3a 100644
--- a/drivers/pci/hotplug/pci_hotplug_core.c
+++ b/drivers/pci/hotplug/pci_hotplug_core.c
@@ -86,8 +86,8 @@ static char *pci_bus_speed_strings[] = {
"66 MHz PCIX 533", /* 0x11 */
"100 MHz PCIX 533", /* 0x12 */
"133 MHz PCIX 533", /* 0x13 */
- "2.5 GT/s PCI-E", /* 0x14 */
- "5.0 GT/s PCI-E", /* 0x15 */
+ "2.5 GT/s PCIe", /* 0x14 */
+ "5.0 GT/s PCIe", /* 0x15 */
};

#ifdef CONFIG_HOTPLUG_PCI_CPCI

2009-10-26 13:18:14

by Krzysztof Halasa

Subject: Re: [PATCH] PCI hotplug: use correct term for PCI Express

Stefan Assmann <[email protected]> writes:

> Change PCI-E to PCIe which is the correct term according to
> http://www.pcisig.com/developers/procedures/logos/Trademark_and_Logo_Usage_Guidelines_updated_112206.pdf.

Right.

> +++ b/drivers/pci/hotplug/pci_hotplug_core.c
> @@ -86,8 +86,8 @@ static char *pci_bus_speed_strings[] = {
> "66 MHz PCIX 533", /* 0x11 */
> "100 MHz PCIX 533", /* 0x12 */
> "133 MHz PCIX 533", /* 0x13 */
> - "2.5 GT/s PCI-E", /* 0x14 */
> - "5.0 GT/s PCI-E", /* 0x15 */
> + "2.5 GT/s PCIe", /* 0x14 */
> + "5.0 GT/s PCIe", /* 0x15 */

In addition to this, it seems "PCIX" should also be changed to "PCI-X",
shouldn't it?
--
Krzysztof Halasa

2009-10-26 13:38:26

by Stefan Assmann

Subject: Re: [PATCH] PCI hotplug: use correct term for PCI Express

On 26.10.2009 14:18, Krzysztof Halasa wrote:
> Stefan Assmann <[email protected]> writes:
>
>> Change PCI-E to PCIe which is the correct term according to
>> http://www.pcisig.com/developers/procedures/logos/Trademark_and_Logo_Usage_Guidelines_updated_112206.pdf.
>
> Right.
>
>> +++ b/drivers/pci/hotplug/pci_hotplug_core.c
>> @@ -86,8 +86,8 @@ static char *pci_bus_speed_strings[] = {
>> "66 MHz PCIX 533", /* 0x11 */
>> "100 MHz PCIX 533", /* 0x12 */
>> "133 MHz PCIX 533", /* 0x13 */
>> - "2.5 GT/s PCI-E", /* 0x14 */
>> - "5.0 GT/s PCI-E", /* 0x15 */
>> + "2.5 GT/s PCIe", /* 0x14 */
>> + "5.0 GT/s PCIe", /* 0x15 */
>
> In addition to this, it seems "PCIX" should also be changed to "PCI-X",
> shouldn't it?

Thanks for reminding me Krzysztof. I'll repost a patch with the changes
included.

Stefan
--
Stefan Assmann | Red Hat GmbH
Software Engineer | Otto-Hahn-Strasse 20, 85609 Dornach
| HR: Amtsgericht Muenchen HRB 153243
| GF: Brendan Lane, Charlie Peters,
sassmann at redhat.com | Michael Cunningham, Charles Cachera

2009-10-26 17:21:08

by Krzysztof Halasa

Subject: Re: [PATCH] PCI hotplug: use correct term for PCI Express

Stefan Assmann <[email protected]> writes:

>> In addition to this, it seems "PCIX" should also be changed to "PCI-X",
>> shouldn't it?
>
> Thanks for reminding me Krzysztof. I'll repost a patch with the changes
> included.

Great and thanks a lot.
--
Krzysztof Halasa