The device tree now exposes the residency values for different idle states. Read
these values instead of calculating residency from the latency values. The values
exposed in the DT are validated for optimal power efficiency. However to maintain
compatibility with the older firmware code which does not expose residency
values, use default values as a fallback mechanism. While at it, use better
APIs to parse the powermgmt device tree node so as to avoid endianness
transformation.
Signed-off-by: Preeti U Murthy <[email protected]>
---
Changes from V2: https://lkml.org/lkml/2015/1/27/1054
1. Used APIs to eliminate endianness transformation
Changes from V1: https://lkml.org/lkml/2015/1/19/221
1. Used a better API for reading the DT property values.
2. Code cleanups
arch/powerpc/platforms/powernv/setup.c | 37 ++++++++------
drivers/cpuidle/cpuidle-powernv.c | 86 ++++++++++++++++++--------------
2 files changed, 71 insertions(+), 52 deletions(-)
diff --git a/arch/powerpc/platforms/powernv/setup.c b/arch/powerpc/platforms/powernv/setup.c
index b700a32..d6a9329 100644
--- a/arch/powerpc/platforms/powernv/setup.c
+++ b/arch/powerpc/platforms/powernv/setup.c
@@ -28,6 +28,7 @@
#include <linux/bug.h>
#include <linux/pci.h>
#include <linux/cpufreq.h>
+#include <linux/slab.h>
#include <asm/machdep.h>
#include <asm/firmware.h>
@@ -409,37 +410,40 @@ static int __init pnv_init_idle_states(void)
{
struct device_node *power_mgt;
int dt_idle_states;
- const __be32 *idle_state_flags;
- u32 len_flags, flags;
+ u32 *flags;
int i;
supported_cpuidle_states = 0;
if (cpuidle_disable != IDLE_NO_OVERRIDE)
- return 0;
+ goto out;
if (!firmware_has_feature(FW_FEATURE_OPALv3))
- return 0;
+ goto out;
power_mgt = of_find_node_by_path("/ibm,opal/power-mgt");
if (!power_mgt) {
pr_warn("opal: PowerMgmt Node not found\n");
- return 0;
+ goto out;
}
- idle_state_flags = of_get_property(power_mgt,
- "ibm,cpu-idle-state-flags", &len_flags);
- if (!idle_state_flags) {
- pr_warn("DT-PowerMgmt: missing ibm,cpu-idle-state-flags\n");
- return 0;
+ dt_idle_states = of_property_count_u32_elems(power_mgt,
+ "ibm,cpu-idle-state-flags");
+ if (dt_idle_states < 0) {
+ pr_warn("cpuidle-powernv: no idle states found in the DT\n");
+ goto out;
}
- dt_idle_states = len_flags / sizeof(u32);
-
- for (i = 0; i < dt_idle_states; i++) {
- flags = be32_to_cpu(idle_state_flags[i]);
- supported_cpuidle_states |= flags;
+ flags = kzalloc(sizeof(*flags) * dt_idle_states, GFP_KERNEL);
+ if (of_property_read_u32_array(power_mgt,
+ "ibm,cpu-idle-state-flags", flags, dt_idle_states)) {
+ pr_warn("cpuidle-powernv: missing ibm,cpu-idle-state-flags in DT\n");
+ goto out_free;
}
+
+ for (i = 0; i < dt_idle_states; i++)
+ supported_cpuidle_states |= flags[i];
+
if (!(supported_cpuidle_states & OPAL_PM_SLEEP_ENABLED_ER1)) {
patch_instruction(
(unsigned int *)pnv_fastsleep_workaround_at_entry,
@@ -449,6 +453,9 @@ static int __init pnv_init_idle_states(void)
PPC_INST_NOP);
}
pnv_alloc_idle_core_states();
+out_free:
+ kfree(flags);
+out:
return 0;
}
diff --git a/drivers/cpuidle/cpuidle-powernv.c b/drivers/cpuidle/cpuidle-powernv.c
index 223d505..2ef4b70 100644
--- a/drivers/cpuidle/cpuidle-powernv.c
+++ b/drivers/cpuidle/cpuidle-powernv.c
@@ -13,6 +13,7 @@
#include <linux/notifier.h>
#include <linux/clockchips.h>
#include <linux/of.h>
+#include <linux/slab.h>
#include <asm/machdep.h>
#include <asm/firmware.h>
@@ -160,70 +161,81 @@ static int powernv_add_idle_states(void)
struct device_node *power_mgt;
int nr_idle_states = 1; /* Snooze */
int dt_idle_states;
- const __be32 *idle_state_flags;
- const __be32 *idle_state_latency;
- u32 len_flags, flags, latency_ns;
- int i;
+ u32 *latency_ns, *residency_ns, *flags;
+ int i, rc;
/* Currently we have snooze statically defined */
-
power_mgt = of_find_node_by_path("/ibm,opal/power-mgt");
if (!power_mgt) {
pr_warn("opal: PowerMgmt Node not found\n");
- return nr_idle_states;
+ goto out;
}
- idle_state_flags = of_get_property(power_mgt, "ibm,cpu-idle-state-flags", &len_flags);
- if (!idle_state_flags) {
- pr_warn("DT-PowerMgmt: missing ibm,cpu-idle-state-flags\n");
- return nr_idle_states;
+ /* Read values of any property to determine the num of idle states */
+ dt_idle_states = of_property_count_u32_elems(power_mgt,
+ "ibm,cpu-idle-state-flags");
+ if (dt_idle_states < 0) {
+ pr_warn("cpuidle-powernv : no idle states found in the DT\n");
+ goto out;
}
- idle_state_latency = of_get_property(power_mgt,
- "ibm,cpu-idle-state-latencies-ns", NULL);
- if (!idle_state_latency) {
- pr_warn("DT-PowerMgmt: missing ibm,cpu-idle-state-latencies-ns\n");
- return nr_idle_states;
+ flags = kzalloc(sizeof(*flags) * dt_idle_states, GFP_KERNEL);
+ if (of_property_read_u32_array(power_mgt,
+ "ibm,cpu-idle-state-flags", flags, dt_idle_states)) {
+ pr_warn("cpuidle-powernv : missing ibm,cpu-idle-state-flags in DT\n");
+ goto out_free_flags;
}
- dt_idle_states = len_flags / sizeof(u32);
-
- for (i = 0; i < dt_idle_states; i++) {
+ latency_ns = kzalloc(sizeof(*latency_ns) * dt_idle_states, GFP_KERNEL);
+ if (of_property_read_u32_array(power_mgt,
+ "ibm,cpu-idle-state-latencies-ns", latency_ns, dt_idle_states)) {
+ pr_warn("cpuidle-powernv: missing ibm,cpu-idle-state-latencies-ns in DT\n");
+ goto out_free_latency;
+ }
- flags = be32_to_cpu(idle_state_flags[i]);
+ residency_ns = kzalloc(sizeof(*residency_ns) * dt_idle_states, GFP_KERNEL);
+ rc = of_property_read_u32_array(power_mgt,
+ "ibm,cpu-idle-state-residency-ns", residency_ns, dt_idle_states);
- /* Cpuidle accepts exit_latency in us and we estimate
- * target residency to be 10x exit_latency
+ for (i = 0; i < dt_idle_states; i++) {
+ /*
+ * Cpuidle accepts exit_latency and target_residency in us.
+ * Use default target_residency values if f/w does not expose it.
*/
- latency_ns = be32_to_cpu(idle_state_latency[i]);
- if (flags & OPAL_PM_NAP_ENABLED) {
+ if (flags[i] & OPAL_PM_NAP_ENABLED) {
/* Add NAP state */
strcpy(powernv_states[nr_idle_states].name, "Nap");
strcpy(powernv_states[nr_idle_states].desc, "Nap");
powernv_states[nr_idle_states].flags = 0;
- powernv_states[nr_idle_states].exit_latency =
- ((unsigned int)latency_ns) / 1000;
- powernv_states[nr_idle_states].target_residency =
- ((unsigned int)latency_ns / 100);
+ powernv_states[nr_idle_states].target_residency = 100;
powernv_states[nr_idle_states].enter = &nap_loop;
- nr_idle_states++;
- }
-
- if (flags & OPAL_PM_SLEEP_ENABLED ||
- flags & OPAL_PM_SLEEP_ENABLED_ER1) {
+ } else if (flags[i] & OPAL_PM_SLEEP_ENABLED ||
+ flags[i] & OPAL_PM_SLEEP_ENABLED_ER1) {
/* Add FASTSLEEP state */
strcpy(powernv_states[nr_idle_states].name, "FastSleep");
strcpy(powernv_states[nr_idle_states].desc, "FastSleep");
powernv_states[nr_idle_states].flags = CPUIDLE_FLAG_TIMER_STOP;
- powernv_states[nr_idle_states].exit_latency =
- ((unsigned int)latency_ns) / 1000;
- powernv_states[nr_idle_states].target_residency =
- ((unsigned int)latency_ns / 100);
+ powernv_states[nr_idle_states].target_residency = 300000;
powernv_states[nr_idle_states].enter = &fastsleep_loop;
- nr_idle_states++;
}
+
+ powernv_states[nr_idle_states].exit_latency =
+ ((unsigned int)latency_ns[i]) / 1000;
+
+ if (!rc) {
+ powernv_states[nr_idle_states].target_residency =
+ ((unsigned int)residency_ns[i]) / 1000;
+ }
+
+ nr_idle_states++;
}
+ kfree(residency_ns);
+out_free_latency:
+ kfree(latency_ns);
+out_free_flags:
+ kfree(flags);
+out:
return nr_idle_states;
}
Preeti U Murthy <[email protected]> writes:
> The device tree now exposes the residency values for different idle states. Read
> these values instead of calculating residency from the latency values. The values
> exposed in the DT are validated for optimal power efficiency. However to maintain
> compatibility with the older firmware code which does not expose residency
> values, use default values as a fallback mechanism. While at it, use better
> APIs to parse the powermgmt device tree node so as to avoid endianness
> transformation.
>
> Signed-off-by: Preeti U Murthy <[email protected]>
Same acked-by as before, from perspective of "I merged the firmware side
of things" and things look godo in relation to firmware PoV.
Acked-by: Stewart Smith <[email protected]>
On Mon, 2015-02-02 at 10:40 +0530, Preeti U Murthy wrote:
> The device tree now exposes the residency values for different idle states. Read
> these values instead of calculating residency from the latency values. The values
> exposed in the DT are validated for optimal power efficiency. However to maintain
> compatibility with the older firmware code which does not expose residency
> values, use default values as a fallback mechanism. While at it, use better
> APIs to parse the powermgmt device tree node so as to avoid endianness
> transformation.
>
> Signed-off-by: Preeti U Murthy <[email protected]>
> ---
> Changes from V2: https://lkml.org/lkml/2015/1/27/1054
> 1. Used APIs to eliminate endianness transformation
Hi Preeti,
I thought I was pretty clear when I said you should do that as a follow-up
patch.
This is now doing too many things, it's not a single logical change, and it's
touching code in arch/powerpc and the driver. Which means neither I nor Rafael
can easily merge it.
So please go back to the v2 you had. And then do the of_property_count_u32_elems()
changes as separate patches.
cheers
On 02/02/2015 12:09 PM, Michael Ellerman wrote:
> On Mon, 2015-02-02 at 10:40 +0530, Preeti U Murthy wrote:
>> The device tree now exposes the residency values for different idle states. Read
>> these values instead of calculating residency from the latency values. The values
>> exposed in the DT are validated for optimal power efficiency. However to maintain
>> compatibility with the older firmware code which does not expose residency
>> values, use default values as a fallback mechanism. While at it, use better
>> APIs to parse the powermgmt device tree node so as to avoid endianness
>> transformation.
>>
>> Signed-off-by: Preeti U Murthy <[email protected]>
>> ---
>> Changes from V2: https://lkml.org/lkml/2015/1/27/1054
>> 1. Used APIs to eliminate endianness transformation
>
> Hi Preeti,
>
> I thought I was pretty clear when I said you should do that as a follow-up
> patch.
>
> This is now doing too many things, it's not a single logical change, and it's
> touching code in arch/powerpc and the driver. Which means neither I nor Rafael
> can easily merge it.
>
> So please go back to the v2 you had. And then do the of_property_count_u32_elems()
> changes as separate patches.
Yeah I apologize for this; going back to the conversation we had, I
realize that I completely overlooked the part where you suggested it as
a second patch. Sorry for the inconvenience.
Rafael, please ignore the versions sent so far. I shall send out two
patches that are logically separated. V2 of this patch that you were
requested to pick up needs some more fixes; the patch was not freeing
the dynamically allocated data after populating the cpufreq table. Ill
fix all of these in the next posting.
Thanks
Regards
Preeti U Murthy
>
> cheers
>
>
> _______________________________________________
> Linuxppc-dev mailing list
> [email protected]
> https://lists.ozlabs.org/listinfo/linuxppc-dev
>