Hello Ben,
I'm trying to use your solo6x10 driver with a card based on 6010 chip.
The driver seems to detect the card correctly, but when I open
/dev/video0 and then close it, I got a kernel panic. I traced the
problem to invalid pointers in q->bufs[i]->queue in a call to
videobuf_queue_cancel().
The kernel is current Linus' tip (.35-rc4+) + your "staging solo6x10".
The same seems to happen with 2.6.34 + the driver included "manually".
x86-64. The card is Commell's MP-6010.
It goes like this:
# modprobe solo6x10 video_type=1
solo6x10: module is from the staging directory, the quality is unknown,
you have been warned.
solo6010 0000:08:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
solo6010 0000:08:00.0: Enabled 2 i2c adapters
solo6010 0000:08:00.0: Initialized 1 tw28xx chip: tw2815[1]
solo6010 0000:08:00.0: Display as /dev/video0 with 4 inputs (1 extended)
solo6010 0000:08:00.0: Encoders as /dev/video1-4
solo6010 0000:08:00.0: Alsa sound card as Softlogic0
# cat /dev/video0 > /dev/null ^C
- videobuf_queue_cancel() called
- about to call list_del(&q->bufs[i]->queue) with:
i = 0
&q->bufs[i]->queue is a valid pointer = 0xffff88033cf97c00
q->bufs[i]->queue.prev = 0xdead000000200200
q->bufs[i]->queue.next = 0xdead000000100100
The backtrace is:
videobuf_queue_cancel()
__videobuf_read_stop()
videobuf_stop()
solo_v4l2_release()
v4l2_release()
fput()
filp_close()
...
Any ideas?
--
Krzysztof Halasa
Krzysztof Halasa <[email protected]> writes:
> I'm trying to use your solo6x10 driver with a card based on 6010 chip.
> The driver seems to detect the card correctly, but when I open
> /dev/video0 and then close it, I got a kernel panic. I traced the
> problem to invalid pointers in q->bufs[i]->queue in a call to
> videobuf_queue_cancel().
BTW I have fixed it and will work on this driver a bit.
Will post the results soon.
--
Krzysztof Halasa