On Tue, 04 Apr 2023 11:20:20 PDT (-0700), [email protected] wrote:
> Enable ACPI core for RISC-V after adding architecture-specific
> interfaces and header files required to build the ACPI core.
>
> 1) Couple of header files are required unconditionally by the ACPI
> core. Add empty acenv.h and cpu.h header files.
>
> 2) If CONFIG_PCI is enabled, a few PCI related interfaces need to
> be provided by the architecture. Define dummy interfaces for now
> so that build succeeds. Actual implementation will be added when
> PCI support is added for ACPI along with external interrupt
> controller support.
>
> 3) A few globals and memory mapping related functions specific
> to the architecture need to be provided.
>
> Signed-off-by: Sunil V L <[email protected]>
> Acked-by: Rafael J. Wysocki <[email protected]>
> Reviewed-by: Andrew Jones <[email protected]>
> Reviewed-by: Conor Dooley <[email protected]>
> ---
> arch/riscv/Kconfig | 5 +++
> arch/riscv/include/asm/acenv.h | 11 +++++
> arch/riscv/include/asm/acpi.h | 61 ++++++++++++++++++++++++++
> arch/riscv/include/asm/cpu.h | 8 ++++
> arch/riscv/kernel/Makefile | 2 +
> arch/riscv/kernel/acpi.c | 80 ++++++++++++++++++++++++++++++++++
> 6 files changed, 167 insertions(+)
> create mode 100644 arch/riscv/include/asm/acenv.h
> create mode 100644 arch/riscv/include/asm/acpi.h
> create mode 100644 arch/riscv/include/asm/cpu.h
> create mode 100644 arch/riscv/kernel/acpi.c
>
> diff --git a/arch/riscv/Kconfig b/arch/riscv/Kconfig
> index 139055bcfcae..710037f7ca0a 100644
> --- a/arch/riscv/Kconfig
> +++ b/arch/riscv/Kconfig
> @@ -12,6 +12,8 @@ config 32BIT
>
> config RISCV
> def_bool y
> + select ACPI_GENERIC_GSI if ACPI
> + select ACPI_REDUCED_HARDWARE_ONLY if ACPI
> select ARCH_ENABLE_HUGEPAGE_MIGRATION if HUGETLB_PAGE && MIGRATION
> select ARCH_ENABLE_SPLIT_PMD_PTLOCK if PGTABLE_LEVELS > 2
> select ARCH_ENABLE_THP_MIGRATION if TRANSPARENT_HUGEPAGE
> @@ -639,6 +641,7 @@ config EFI
> depends on OF && !XIP_KERNEL
> depends on MMU
> default y
> + select ARCH_SUPPORTS_ACPI if 64BIT
> select EFI_GENERIC_STUB
> select EFI_PARAMS_FROM_FDT
> select EFI_RUNTIME_WRAPPERS
> @@ -742,3 +745,5 @@ source "drivers/cpufreq/Kconfig"
> endmenu # "CPU Power Management"
>
> source "arch/riscv/kvm/Kconfig"
> +
> +source "drivers/acpi/Kconfig"
> diff --git a/arch/riscv/include/asm/acenv.h b/arch/riscv/include/asm/acenv.h
> new file mode 100644
> index 000000000000..43ae2e32c779
> --- /dev/null
> +++ b/arch/riscv/include/asm/acenv.h
> @@ -0,0 +1,11 @@
> +/* SPDX-License-Identifier: GPL-2.0-only */
> +/*
> + * RISC-V specific ACPICA environments and implementation
> + */
> +
> +#ifndef _ASM_ACENV_H
> +#define _ASM_ACENV_H
> +
> +/* This header is required unconditionally by the ACPI core */
> +
> +#endif /* _ASM_ACENV_H */
> diff --git a/arch/riscv/include/asm/acpi.h b/arch/riscv/include/asm/acpi.h
> new file mode 100644
> index 000000000000..bcade255bd6e
> --- /dev/null
> +++ b/arch/riscv/include/asm/acpi.h
> @@ -0,0 +1,61 @@
> +/* SPDX-License-Identifier: GPL-2.0-only */
> +/*
> + * Copyright (C) 2013-2014, Linaro Ltd.
> + * Author: Al Stone <[email protected]>
> + * Author: Graeme Gregory <[email protected]>
> + * Author: Hanjun Guo <[email protected]>
> + *
> + * Copyright (C) 2021-2023, Ventana Micro Systems Inc.
> + * Author: Sunil V L <[email protected]>
> + */
> +
> +#ifndef _ASM_ACPI_H
> +#define _ASM_ACPI_H
> +
> +/* Basic configuration for ACPI */
> +#ifdef CONFIG_ACPI
> +
> +/* ACPI table mapping after acpi_permanent_mmap is set */
> +void *acpi_os_ioremap(acpi_physical_address phys, acpi_size size);
> +#define acpi_os_ioremap acpi_os_ioremap
> +
> +#define acpi_strict 1 /* No out-of-spec workarounds on RISC-V */
> +extern int acpi_disabled;
> +extern int acpi_noirq;
> +extern int acpi_pci_disabled;
> +
> +static inline void disable_acpi(void)
> +{
> + acpi_disabled = 1;
> + acpi_pci_disabled = 1;
> + acpi_noirq = 1;
> +}
> +
> +static inline void enable_acpi(void)
> +{
> + acpi_disabled = 0;
> + acpi_pci_disabled = 0;
> + acpi_noirq = 0;
> +}
> +
> +/*
> + * The ACPI processor driver for ACPI core code needs this macro
> + * to find out whether this cpu was already mapped (mapping from CPU hardware
> + * ID to CPU logical ID) or not.
> + */
> +#define cpu_physical_id(cpu) cpuid_to_hartid_map(cpu)
> +
> +/*
> + * Since MADT must provide at least one RINTC structure, the
> + * CPU will be always available in MADT on RISC-V.
> + */
> +static inline bool acpi_has_cpu_in_madt(void)
> +{
> + return true;
> +}
> +
> +static inline void arch_fix_phys_package_id(int num, u32 slot) { }
> +
> +#endif /* CONFIG_ACPI */
> +
> +#endif /*_ASM_ACPI_H*/
> diff --git a/arch/riscv/include/asm/cpu.h b/arch/riscv/include/asm/cpu.h
> new file mode 100644
> index 000000000000..28d45a6678ce
> --- /dev/null
> +++ b/arch/riscv/include/asm/cpu.h
> @@ -0,0 +1,8 @@
> +/* SPDX-License-Identifier: GPL-2.0-only */
> +
> +#ifndef _ASM_CPU_H
> +#define _ASM_CPU_H
> +
> +/* This header is required unconditionally by the ACPI core */
> +
> +#endif /* _ASM_CPU_H */
> diff --git a/arch/riscv/kernel/Makefile b/arch/riscv/kernel/Makefile
> index 67f542be1bea..8ce334f6932f 100644
> --- a/arch/riscv/kernel/Makefile
> +++ b/arch/riscv/kernel/Makefile
> @@ -90,3 +90,5 @@ obj-$(CONFIG_EFI) += efi.o
> obj-$(CONFIG_COMPAT) += compat_syscall_table.o
> obj-$(CONFIG_COMPAT) += compat_signal.o
> obj-$(CONFIG_COMPAT) += compat_vdso/
> +
> +obj-$(CONFIG_ACPI) += acpi.o
> diff --git a/arch/riscv/kernel/acpi.c b/arch/riscv/kernel/acpi.c
> new file mode 100644
> index 000000000000..81d448c41714
> --- /dev/null
> +++ b/arch/riscv/kernel/acpi.c
> @@ -0,0 +1,80 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * RISC-V Specific Low-Level ACPI Boot Support
> + *
> + * Copyright (C) 2013-2014, Linaro Ltd.
> + * Author: Al Stone <[email protected]>
> + * Author: Graeme Gregory <[email protected]>
> + * Author: Hanjun Guo <[email protected]>
> + * Author: Tomasz Nowicki <[email protected]>
> + * Author: Naresh Bhat <[email protected]>
> + *
> + * Copyright (C) 2021-2023, Ventana Micro Systems Inc.
> + * Author: Sunil V L <[email protected]>
> + */
> +
> +#include <linux/acpi.h>
> +#include <linux/io.h>
> +#include <linux/pci.h>
> +
> +int acpi_noirq = 1; /* skip ACPI IRQ initialization */
> +int acpi_disabled = 1;
> +EXPORT_SYMBOL(acpi_disabled);
> +
> +int acpi_pci_disabled = 1; /* skip ACPI PCI scan and IRQ initialization */
> +EXPORT_SYMBOL(acpi_pci_disabled);
> +
> +/*
> + * __acpi_map_table() will be called before paging_init(), so early_ioremap()
> + * or early_memremap() should be called here to for ACPI table mapping.
> + */
> +void __init __iomem *__acpi_map_table(unsigned long phys, unsigned long size)
> +{
> + if (!size)
> + return NULL;
> +
> + return early_memremap(phys, size);
> +}
> +
> +void __init __acpi_unmap_table(void __iomem *map, unsigned long size)
> +{
> + if (!map || !size)
> + return;
> +
> + early_memunmap(map, size);
> +}
> +
> +void *acpi_os_ioremap(acpi_physical_address phys, acpi_size size)
> +{
> + return memremap(phys, size, MEMREMAP_WB);
> +}
> +
> +#ifdef CONFIG_PCI
> +
> +/*
> + * These interfaces are defined just to enable building ACPI core.
> + * TODO: Update it with actual implementation when external interrupt
> + * controller support is added in RISC-V ACPI.
> + */
> +int raw_pci_read(unsigned int domain, unsigned int bus, unsigned int devfn,
> + int reg, int len, u32 *val)
> +{
> + return PCIBIOS_DEVICE_NOT_FOUND;
> +}
> +
> +int raw_pci_write(unsigned int domain, unsigned int bus, unsigned int devfn,
> + int reg, int len, u32 val)
> +{
> + return PCIBIOS_DEVICE_NOT_FOUND;
> +}
> +
> +int acpi_pci_bus_find_domain_nr(struct pci_bus *bus)
> +{
> + return -1;
> +}
> +
> +struct pci_bus *pci_acpi_scan_root(struct acpi_pci_root *root)
> +{
> + return NULL;
> +}
> +#endif /* CONFIG_PCI */
Reviewed-by: Palmer Dabbelt <[email protected]>