2024-06-05 10:52:14

by Hal Feng

[permalink] [raw]
Subject: [PATCH v3] riscv: defconfig: Enable StarFive JH7110 drivers

Add support for StarFive JH7110 SoC and VisionFive 2 board.
- Cache
- Temperature sensor
- PMIC (AXP15060)
- Ethernet PHY (YT8531)
- Restart GPIO
- RNG
- I2C
- SPI
- Quad SPI
- PCIe
- USB & USB 2.0 PHY & PCIe 2.0/USB 3.0 PHY
- Audio (I2S / TDM / PWM-DAC)
- MIPI-CSI2 RX & D-PHY RX

Signed-off-by: Hal Feng <[email protected]>
---

As more drivers of StarFive JH7110 VisionFive 2 board are upstream,
add support for them in riscv defconfig.

Changes since v2:
- As the JH7110 PCIe driver was accepted, add CONFIG_PCIE_STARFIVE_HOST=m.
- Add CONFIG_MOTORCOMM_PHY=m, which supports the ethernet phy chips
on the board.
- Rebase on the -next branch.

Changes since v1:
- Drop CONFIG_STAGING=y, CONFIG_STAGING_MEDIA=y,
CONFIG_V4L_PLATFORM_DRIVERS=y, CONFIG_VIDEO_STARFIVE_CAMSS=m.
- Change CONFIG_SENSORS_SFCTEMP as a module.
- Drop CONFIG_CLK_STARFIVE_JH7110_*=y, because they are not critical to boot.
- Update the commit message.

History:
v2: https://lore.kernel.org/all/[email protected]/
v1: https://lore.kernel.org/all/[email protected]/

---
arch/riscv/configs/defconfig | 26 ++++++++++++++++++++++++++
1 file changed, 26 insertions(+)

diff --git a/arch/riscv/configs/defconfig b/arch/riscv/configs/defconfig
index 12dc8c73a8ac..6e10039c5c42 100644
--- a/arch/riscv/configs/defconfig
+++ b/arch/riscv/configs/defconfig
@@ -110,8 +110,10 @@ CONFIG_PCIEPORTBUS=y
CONFIG_PCI_HOST_GENERIC=y
CONFIG_PCIE_XILINX=y
CONFIG_PCIE_FU740=y
+CONFIG_PCIE_STARFIVE_HOST=m
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
+CONFIG_SIFIVE_CCACHE=y
CONFIG_MTD=y
CONFIG_MTD_BLOCK=y
CONFIG_MTD_CFI=y
@@ -143,6 +145,7 @@ CONFIG_RAVB=y
CONFIG_STMMAC_ETH=m
CONFIG_MICREL_PHY=y
CONFIG_MICROSEMI_PHY=y
+CONFIG_MOTORCOMM_PHY=m
CONFIG_CAN_RCAR_CANFD=m
CONFIG_INPUT_MOUSEDEV=y
CONFIG_KEYBOARD_SUN4I_LRADC=m
@@ -155,24 +158,35 @@ CONFIG_SERIAL_EARLYCON_RISCV_SBI=y
CONFIG_VIRTIO_CONSOLE=y
CONFIG_HW_RANDOM=y
CONFIG_HW_RANDOM_VIRTIO=y
+CONFIG_HW_RANDOM_JH7110=m
+CONFIG_I2C=y
CONFIG_I2C_CHARDEV=m
+CONFIG_I2C_DESIGNWARE_PLATFORM=y
CONFIG_I2C_MV64XXX=m
CONFIG_I2C_RIIC=y
CONFIG_SPI=y
+CONFIG_SPI_CADENCE_QUADSPI=m
+CONFIG_SPI_PL022=m
CONFIG_SPI_RSPI=m
CONFIG_SPI_SIFIVE=y
CONFIG_SPI_SUN6I=y
# CONFIG_PTP_1588_CLOCK is not set
CONFIG_GPIO_SIFIVE=y
+CONFIG_POWER_RESET_GPIO_RESTART=y
+CONFIG_SENSORS_SFCTEMP=m
CONFIG_CPU_THERMAL=y
CONFIG_DEVFREQ_THERMAL=y
CONFIG_RZG2L_THERMAL=y
CONFIG_WATCHDOG=y
CONFIG_SUNXI_WATCHDOG=y
CONFIG_RENESAS_RZG2LWDT=y
+CONFIG_MFD_AXP20X_I2C=y
CONFIG_REGULATOR=y
CONFIG_REGULATOR_FIXED_VOLTAGE=y
+CONFIG_REGULATOR_AXP20X=y
CONFIG_REGULATOR_GPIO=y
+CONFIG_MEDIA_SUPPORT=m
+CONFIG_VIDEO_CADENCE_CSI2RX=m
CONFIG_DRM=m
CONFIG_DRM_RADEON=m
CONFIG_DRM_NOUVEAU=m
@@ -184,6 +198,10 @@ CONFIG_SOUND=y
CONFIG_SND=y
CONFIG_SND_SOC=y
CONFIG_SND_SOC_RZ=m
+CONFIG_SND_DESIGNWARE_I2S=m
+CONFIG_SND_SOC_STARFIVE=m
+CONFIG_SND_SOC_JH7110_PWMDAC=m
+CONFIG_SND_SOC_JH7110_TDM=m
CONFIG_SND_SOC_WM8978=m
CONFIG_SND_SIMPLE_CARD=m
CONFIG_USB=y
@@ -197,6 +215,11 @@ CONFIG_USB_OHCI_HCD_PLATFORM=y
CONFIG_USB_RENESAS_USBHS=m
CONFIG_USB_STORAGE=y
CONFIG_USB_UAS=y
+CONFIG_USB_CDNS_SUPPORT=m
+CONFIG_USB_CDNS3=m
+CONFIG_USB_CDNS3_GADGET=y
+CONFIG_USB_CDNS3_HOST=y
+CONFIG_USB_CDNS3_STARFIVE=m
CONFIG_USB_MUSB_HDRC=m
CONFIG_USB_MUSB_SUNXI=m
CONFIG_NOP_USB_XCEIV=m
@@ -246,6 +269,9 @@ CONFIG_RZG2L_ADC=m
CONFIG_RESET_RZG2L_USBPHY_CTRL=y
CONFIG_PHY_SUN4I_USB=m
CONFIG_PHY_RCAR_GEN3_USB2=y
+CONFIG_PHY_STARFIVE_JH7110_DPHY_RX=m
+CONFIG_PHY_STARFIVE_JH7110_PCIE=m
+CONFIG_PHY_STARFIVE_JH7110_USB=m
CONFIG_LIBNVDIMM=y
CONFIG_NVMEM_SUNXI_SID=y
CONFIG_EXT4_FS=y
--
2.43.2



2024-06-12 21:58:51

by Palmer Dabbelt

[permalink] [raw]
Subject: Re: [PATCH v3] riscv: defconfig: Enable StarFive JH7110 drivers

On Wed, 05 Jun 2024 00:17:01 PDT (-0700), [email protected] wrote:
> Add support for StarFive JH7110 SoC and VisionFive 2 board.
> - Cache
> - Temperature sensor
> - PMIC (AXP15060)
> - Ethernet PHY (YT8531)
> - Restart GPIO
> - RNG
> - I2C
> - SPI
> - Quad SPI
> - PCIe
> - USB & USB 2.0 PHY & PCIe 2.0/USB 3.0 PHY
> - Audio (I2S / TDM / PWM-DAC)
> - MIPI-CSI2 RX & D-PHY RX
>
> Signed-off-by: Hal Feng <[email protected]>
> ---
>
> As more drivers of StarFive JH7110 VisionFive 2 board are upstream,
> add support for them in riscv defconfig.
>
> Changes since v2:
> - As the JH7110 PCIe driver was accepted, add CONFIG_PCIE_STARFIVE_HOST=m.
> - Add CONFIG_MOTORCOMM_PHY=m, which supports the ethernet phy chips
> on the board.
> - Rebase on the -next branch.
>
> Changes since v1:
> - Drop CONFIG_STAGING=y, CONFIG_STAGING_MEDIA=y,
> CONFIG_V4L_PLATFORM_DRIVERS=y, CONFIG_VIDEO_STARFIVE_CAMSS=m.
> - Change CONFIG_SENSORS_SFCTEMP as a module.
> - Drop CONFIG_CLK_STARFIVE_JH7110_*=y, because they are not critical to boot.
> - Update the commit message.
>
> History:
> v2: https://lore.kernel.org/all/[email protected]/
> v1: https://lore.kernel.org/all/[email protected]/
>
> ---
> arch/riscv/configs/defconfig | 26 ++++++++++++++++++++++++++
> 1 file changed, 26 insertions(+)
>
> diff --git a/arch/riscv/configs/defconfig b/arch/riscv/configs/defconfig
> index 12dc8c73a8ac..6e10039c5c42 100644
> --- a/arch/riscv/configs/defconfig
> +++ b/arch/riscv/configs/defconfig
> @@ -110,8 +110,10 @@ CONFIG_PCIEPORTBUS=y
> CONFIG_PCI_HOST_GENERIC=y
> CONFIG_PCIE_XILINX=y
> CONFIG_PCIE_FU740=y
> +CONFIG_PCIE_STARFIVE_HOST=m
> CONFIG_DEVTMPFS=y
> CONFIG_DEVTMPFS_MOUNT=y
> +CONFIG_SIFIVE_CCACHE=y
> CONFIG_MTD=y
> CONFIG_MTD_BLOCK=y
> CONFIG_MTD_CFI=y
> @@ -143,6 +145,7 @@ CONFIG_RAVB=y
> CONFIG_STMMAC_ETH=m
> CONFIG_MICREL_PHY=y
> CONFIG_MICROSEMI_PHY=y
> +CONFIG_MOTORCOMM_PHY=m
> CONFIG_CAN_RCAR_CANFD=m
> CONFIG_INPUT_MOUSEDEV=y
> CONFIG_KEYBOARD_SUN4I_LRADC=m
> @@ -155,24 +158,35 @@ CONFIG_SERIAL_EARLYCON_RISCV_SBI=y
> CONFIG_VIRTIO_CONSOLE=y
> CONFIG_HW_RANDOM=y
> CONFIG_HW_RANDOM_VIRTIO=y
> +CONFIG_HW_RANDOM_JH7110=m
> +CONFIG_I2C=y
> CONFIG_I2C_CHARDEV=m
> +CONFIG_I2C_DESIGNWARE_PLATFORM=y
> CONFIG_I2C_MV64XXX=m
> CONFIG_I2C_RIIC=y
> CONFIG_SPI=y
> +CONFIG_SPI_CADENCE_QUADSPI=m
> +CONFIG_SPI_PL022=m
> CONFIG_SPI_RSPI=m
> CONFIG_SPI_SIFIVE=y
> CONFIG_SPI_SUN6I=y
> # CONFIG_PTP_1588_CLOCK is not set
> CONFIG_GPIO_SIFIVE=y
> +CONFIG_POWER_RESET_GPIO_RESTART=y
> +CONFIG_SENSORS_SFCTEMP=m
> CONFIG_CPU_THERMAL=y
> CONFIG_DEVFREQ_THERMAL=y
> CONFIG_RZG2L_THERMAL=y
> CONFIG_WATCHDOG=y
> CONFIG_SUNXI_WATCHDOG=y
> CONFIG_RENESAS_RZG2LWDT=y
> +CONFIG_MFD_AXP20X_I2C=y
> CONFIG_REGULATOR=y
> CONFIG_REGULATOR_FIXED_VOLTAGE=y
> +CONFIG_REGULATOR_AXP20X=y
> CONFIG_REGULATOR_GPIO=y
> +CONFIG_MEDIA_SUPPORT=m
> +CONFIG_VIDEO_CADENCE_CSI2RX=m
> CONFIG_DRM=m
> CONFIG_DRM_RADEON=m
> CONFIG_DRM_NOUVEAU=m
> @@ -184,6 +198,10 @@ CONFIG_SOUND=y
> CONFIG_SND=y
> CONFIG_SND_SOC=y
> CONFIG_SND_SOC_RZ=m
> +CONFIG_SND_DESIGNWARE_I2S=m
> +CONFIG_SND_SOC_STARFIVE=m
> +CONFIG_SND_SOC_JH7110_PWMDAC=m
> +CONFIG_SND_SOC_JH7110_TDM=m
> CONFIG_SND_SOC_WM8978=m
> CONFIG_SND_SIMPLE_CARD=m
> CONFIG_USB=y
> @@ -197,6 +215,11 @@ CONFIG_USB_OHCI_HCD_PLATFORM=y
> CONFIG_USB_RENESAS_USBHS=m
> CONFIG_USB_STORAGE=y
> CONFIG_USB_UAS=y
> +CONFIG_USB_CDNS_SUPPORT=m
> +CONFIG_USB_CDNS3=m
> +CONFIG_USB_CDNS3_GADGET=y
> +CONFIG_USB_CDNS3_HOST=y
> +CONFIG_USB_CDNS3_STARFIVE=m
> CONFIG_USB_MUSB_HDRC=m
> CONFIG_USB_MUSB_SUNXI=m
> CONFIG_NOP_USB_XCEIV=m
> @@ -246,6 +269,9 @@ CONFIG_RZG2L_ADC=m
> CONFIG_RESET_RZG2L_USBPHY_CTRL=y
> CONFIG_PHY_SUN4I_USB=m
> CONFIG_PHY_RCAR_GEN3_USB2=y
> +CONFIG_PHY_STARFIVE_JH7110_DPHY_RX=m
> +CONFIG_PHY_STARFIVE_JH7110_PCIE=m
> +CONFIG_PHY_STARFIVE_JH7110_USB=m
> CONFIG_LIBNVDIMM=y
> CONFIG_NVMEM_SUNXI_SID=y
> CONFIG_EXT4_FS=y

Acked-by: Palmer Dabbelt <[email protected]>

2024-06-12 22:17:47

by Conor Dooley

[permalink] [raw]
Subject: Re: [PATCH v3] riscv: defconfig: Enable StarFive JH7110 drivers

From: Conor Dooley <[email protected]>

On Wed, 05 Jun 2024 15:17:01 +0800, Hal Feng wrote:
> Add support for StarFive JH7110 SoC and VisionFive 2 board.
> - Cache
> - Temperature sensor
> - PMIC (AXP15060)
> - Ethernet PHY (YT8531)
> - Restart GPIO
> - RNG
> - I2C
> - SPI
> - Quad SPI
> - PCIe
> - USB & USB 2.0 PHY & PCIe 2.0/USB 3.0 PHY
> - Audio (I2S / TDM / PWM-DAC)
> - MIPI-CSI2 RX & D-PHY RX
>
> [...]

Applied to riscv-config-for-next, thanks!

[1/1] riscv: defconfig: Enable StarFive JH7110 drivers
https://git.kernel.org/conor/c/d8a7d89abb09

Thanks,
Conor.