2021-10-01 17:45:11

by José Expósito

Subject: [PATCH] HID: multitouch: disable sticky fingers for UPERFECT Y

When a finger is on the screen, the UPERFECT Y portable touchscreen
monitor reports a contact in the first place. However, after this
initial report, contacts are not reported at the refresh rate of the
screen as required by the Windows 8 specs.

This behaviour triggers the release_timer, removing the fingers even
though they are still present.

To avoid it, add a new class, similar to MT_CLS_WIN_8 but without the
MT_QUIRK_STICKY_FINGERS quirk for this device.

Suggested-by: Benjamin Tissoires <[email protected]>
Signed-off-by: José Expósito <[email protected]>
---
drivers/hid/hid-ids.h | 3 +++
drivers/hid/hid-multitouch.c | 13 +++++++++++++
2 files changed, 16 insertions(+)

diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h
index 29564b370341..3706c635b12e 100644
--- a/drivers/hid/hid-ids.h
+++ b/drivers/hid/hid-ids.h
@@ -1276,6 +1276,9 @@
#define USB_DEVICE_ID_WEIDA_8752 0xC300
#define USB_DEVICE_ID_WEIDA_8755 0xC301

+#define USB_VENDOR_ID_WINBOND 0x0416
+#define USB_DEVICE_ID_TSTP_MTOUCH 0xc168
+
#define USB_VENDOR_ID_WISEGROUP 0x0925
#define USB_DEVICE_ID_SMARTJOY_PLUS 0x0005
#define USB_DEVICE_ID_SUPER_JOY_BOX_3 0x8888
diff --git a/drivers/hid/hid-multitouch.c b/drivers/hid/hid-multitouch.c
index 3ea7cb1cda84..e1afddb7b33d 100644
--- a/drivers/hid/hid-multitouch.c
+++ b/drivers/hid/hid-multitouch.c
@@ -193,6 +193,7 @@ static void mt_post_parse(struct mt_device *td, struct mt_application *app);
/* reserved 0x0014 */
#define MT_CLS_WIN_8_FORCE_MULTI_INPUT 0x0015
#define MT_CLS_WIN_8_DISABLE_WAKEUP 0x0016
+#define MT_CLS_WIN_8_NO_STICKY_FINGERS 0x0017

/* vendor specific classes */
#define MT_CLS_3M 0x0101
@@ -294,6 +295,13 @@ static const struct mt_class mt_classes[] = {
MT_QUIRK_WIN8_PTP_BUTTONS |
MT_QUIRK_DISABLE_WAKEUP,
.export_all_inputs = true },
+ { .name = MT_CLS_WIN_8_NO_STICKY_FINGERS,
+ .quirks = MT_QUIRK_ALWAYS_VALID |
+ MT_QUIRK_IGNORE_DUPLICATES |
+ MT_QUIRK_HOVERING |
+ MT_QUIRK_CONTACT_CNT_ACCURATE |
+ MT_QUIRK_WIN8_PTP_BUTTONS,
+ .export_all_inputs = true },

/*
* vendor specific classes
@@ -2120,6 +2128,11 @@ static const struct hid_device_id mt_devices[] = {
MT_USB_DEVICE(USB_VENDOR_ID_VTL,
USB_DEVICE_ID_VTL_MULTITOUCH_FF3F) },

+ /* Winbond Electronics Corp. */
+ { .driver_data = MT_CLS_WIN_8_NO_STICKY_FINGERS,
+ HID_DEVICE(HID_BUS_ANY, HID_GROUP_MULTITOUCH_WIN_8,
+ USB_VENDOR_ID_WINBOND, USB_DEVICE_ID_TSTP_MTOUCH) },
+
/* Wistron panels */
{ .driver_data = MT_CLS_NSMU,
MT_USB_DEVICE(USB_VENDOR_ID_WISTRON,
--
2.25.1

2021-10-07 12:10:56

by Jiri Kosina

Subject: Re: [PATCH] HID: multitouch: disable sticky fingers for UPERFECT Y

On Fri, 1 Oct 2021, José Expósito wrote:

> When a finger is on the screen, the UPERFECT Y portable touchscreen
> monitor reports a contact in the first place. However, after this
> initial report, contacts are not reported at the refresh rate of the
> screen as required by the Windows 8 specs.
>
> This behaviour triggers the release_timer, removing the fingers even
> though they are still present.
>
> To avoid it, add a new class, similar to MT_CLS_WIN_8 but without the
> MT_QUIRK_STICKY_FINGERS quirk for this device.
>
> Suggested-by: Benjamin Tissoires <[email protected]>
> Signed-off-by: José Expósito <[email protected]>

Applied, thanks.

--
Jiri Kosina
SUSE Labs