From: Philippe Valembois <[email protected]>
For now only supports one model and only filters out bogus reports sent
when the keyboard has been configured through hidraw.
Without this, as events are not released, soft repeat floods userspace
with unknown key events.
Signed-off-by: Philippe Valembois <[email protected]>
---
drivers/hid/Kconfig | 7 ++++
drivers/hid/Makefile | 1 +
drivers/hid/hid-evision.c | 79 +++++++++++++++++++++++++++++++++++++++
3 files changed, 87 insertions(+)
create mode 100644 drivers/hid/hid-evision.c
diff --git a/drivers/hid/Kconfig b/drivers/hid/Kconfig
index e2a5d30c8..1320ea75c 100644
--- a/drivers/hid/Kconfig
+++ b/drivers/hid/Kconfig
@@ -329,6 +329,13 @@ config HID_ELO
Support for the ELO USB 4000/4500 touchscreens. Note that this is for
different devices than those handled by CONFIG_TOUCHSCREEN_USB_ELO.
+config HID_EVISION
+ tristate "EVision Keyboards Support"
+ depends on USB_HID
+ help
+ Support for some EVision keyboards. Note that this is needed only when
+ applying customization using userspace programs.
+
config HID_EZKEY
tristate "Ezkey BTC 8193 keyboard"
default !EXPERT
diff --git a/drivers/hid/Makefile b/drivers/hid/Makefile
index e8014c1a2..bd01571dd 100644
--- a/drivers/hid/Makefile
+++ b/drivers/hid/Makefile
@@ -45,6 +45,7 @@ obj-$(CONFIG_HID_EMS_FF) += hid-emsff.o
obj-$(CONFIG_HID_ELAN) += hid-elan.o
obj-$(CONFIG_HID_ELECOM) += hid-elecom.o
obj-$(CONFIG_HID_ELO) += hid-elo.o
+obj-$(CONFIG_HID_EVISION) += hid-evision.o
obj-$(CONFIG_HID_EZKEY) += hid-ezkey.o
obj-$(CONFIG_HID_FT260) += hid-ft260.o
obj-$(CONFIG_HID_GEMBIRD) += hid-gembird.o
diff --git a/drivers/hid/hid-evision.c b/drivers/hid/hid-evision.c
new file mode 100644
index 000000000..6ea331575
--- /dev/null
+++ b/drivers/hid/hid-evision.c
@@ -0,0 +1,79 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * HID driver for EVision devices
+ * For now, only ignore bogus consumer reports
+ * sent after the keyboard has been configured
+ *
+ * Copyright (c) 2022 Philippe Valembois
+ */
+
+#include <linux/device.h>
+#include <linux/input.h>
+#include <linux/hid.h>
+#include <linux/module.h>
+#include <linux/usb.h>
+
+
+#define USB_VENDOR_ID_EVISION 0x320f
+#define USB_DEVICE_ID_EVISION_ICL01 0x5041
+
+static int evision_input_mapping(struct hid_device *hdev, struct hid_input *hi,
+ struct hid_field *field, struct hid_usage *usage,
+ unsigned long **bit, int *max)
+{
+ if ((usage->hid & HID_USAGE_PAGE) != HID_UP_CONSUMER)
+ return 0;
+
+ // Ignore key down event
+ if ((usage->hid & HID_USAGE) >> 8 == 0x05)
+ return -1;
+ // Ignore key up event
+ if ((usage->hid & HID_USAGE) >> 8 == 0x06)
+ return -1;
+
+ switch (usage->hid & HID_USAGE) {
+ // Ignore configuration saved event
+ case 0x0401: return -1;
+ // Ignore reset event
+ case 0x0402: return -1;
+ }
+ return 0;
+}
+
+static int evision_probe(struct hid_device *hdev, const struct hid_device_id *id)
+{
+ int ret;
+
+ if (!hid_is_usb(hdev))
+ return -EINVAL;
+
+ ret = hid_parse(hdev);
+ if (ret) {
+ hid_err(hdev, "EVision hid parse failed: %d\n", ret);
+ return ret;
+ }
+
+ ret = hid_hw_start(hdev, HID_CONNECT_DEFAULT);
+ if (ret) {
+ hid_err(hdev, "EVision hw start failed: %d\n", ret);
+ return ret;
+ }
+
+ return 0;
+}
+
+static const struct hid_device_id evision_devices[] = {
+ { HID_USB_DEVICE(USB_VENDOR_ID_EVISION, USB_DEVICE_ID_EVISION_ICL01) },
+ { }
+};
+MODULE_DEVICE_TABLE(hid, evision_devices);
+
+static struct hid_driver evision_driver = {
+ .name = "evision",
+ .id_table = evision_devices,
+ .input_mapping = evision_input_mapping,
+ .probe = evision_probe,
+};
+module_hid_driver(evision_driver);
+
+MODULE_LICENSE("GPL");
--
2.38.2
On Sat, Dec 24, 2022 at 1:23 PM Philippe Valembois
<[email protected]> wrote:
>
> From: Philippe Valembois <[email protected]>
Jiri, I have a doubt. Do we accept emails from users.noreply.github.com?
>
> For now only supports one model and only filters out bogus reports sent
> when the keyboard has been configured through hidraw.
> Without this, as events are not released, soft repeat floods userspace
> with unknown key events.
>
> Signed-off-by: Philippe Valembois <[email protected]>
> ---
> drivers/hid/Kconfig | 7 ++++
> drivers/hid/Makefile | 1 +
> drivers/hid/hid-evision.c | 79 +++++++++++++++++++++++++++++++++++++++
> 3 files changed, 87 insertions(+)
> create mode 100644 drivers/hid/hid-evision.c
>
> diff --git a/drivers/hid/Kconfig b/drivers/hid/Kconfig
> index e2a5d30c8..1320ea75c 100644
> --- a/drivers/hid/Kconfig
> +++ b/drivers/hid/Kconfig
> @@ -329,6 +329,13 @@ config HID_ELO
> Support for the ELO USB 4000/4500 touchscreens. Note that this is for
> different devices than those handled by CONFIG_TOUCHSCREEN_USB_ELO.
>
> +config HID_EVISION
> + tristate "EVision Keyboards Support"
> + depends on USB_HID
AFAICT, the driver only uses pure HID API, so you should be able to
depend on HID, not just USB_HID.
> + help
> + Support for some EVision keyboards. Note that this is needed only when
> + applying customization using userspace programs.
> +
> config HID_EZKEY
> tristate "Ezkey BTC 8193 keyboard"
> default !EXPERT
> diff --git a/drivers/hid/Makefile b/drivers/hid/Makefile
> index e8014c1a2..bd01571dd 100644
> --- a/drivers/hid/Makefile
> +++ b/drivers/hid/Makefile
> @@ -45,6 +45,7 @@ obj-$(CONFIG_HID_EMS_FF) += hid-emsff.o
> obj-$(CONFIG_HID_ELAN) += hid-elan.o
> obj-$(CONFIG_HID_ELECOM) += hid-elecom.o
> obj-$(CONFIG_HID_ELO) += hid-elo.o
> +obj-$(CONFIG_HID_EVISION) += hid-evision.o
> obj-$(CONFIG_HID_EZKEY) += hid-ezkey.o
> obj-$(CONFIG_HID_FT260) += hid-ft260.o
> obj-$(CONFIG_HID_GEMBIRD) += hid-gembird.o
> diff --git a/drivers/hid/hid-evision.c b/drivers/hid/hid-evision.c
> new file mode 100644
> index 000000000..6ea331575
> --- /dev/null
> +++ b/drivers/hid/hid-evision.c
> @@ -0,0 +1,79 @@
> +// SPDX-License-Identifier: GPL-2.0-or-later
> +/*
> + * HID driver for EVision devices
> + * For now, only ignore bogus consumer reports
> + * sent after the keyboard has been configured
> + *
> + * Copyright (c) 2022 Philippe Valembois
> + */
> +
> +#include <linux/device.h>
> +#include <linux/input.h>
> +#include <linux/hid.h>
> +#include <linux/module.h>
> +#include <linux/usb.h>
Outside of hid_is_usb(), you are not using anything USB related, so
this can be dropped
> +
> +
> +#define USB_VENDOR_ID_EVISION 0x320f
> +#define USB_DEVICE_ID_EVISION_ICL01 0x5041
We tend to add those variables in drivers/hid/hid-ids.h
> +
> +static int evision_input_mapping(struct hid_device *hdev, struct hid_input *hi,
> + struct hid_field *field, struct hid_usage *usage,
> + unsigned long **bit, int *max)
> +{
> + if ((usage->hid & HID_USAGE_PAGE) != HID_UP_CONSUMER)
> + return 0;
> +
> + // Ignore key down event
No C++ comments style please, use /* */ instead
> + if ((usage->hid & HID_USAGE) >> 8 == 0x05)
> + return -1;
> + // Ignore key up event
Same (and for any other // below).
> + if ((usage->hid & HID_USAGE) >> 8 == 0x06)
> + return -1;
> +
> + switch (usage->hid & HID_USAGE) {
> + // Ignore configuration saved event
> + case 0x0401: return -1;
> + // Ignore reset event
> + case 0x0402: return -1;
> + }
> + return 0;
> +}
> +
> +static int evision_probe(struct hid_device *hdev, const struct hid_device_id *id)
> +{
> + int ret;
> +
> + if (!hid_is_usb(hdev))
> + return -EINVAL;
This can be dropped...
> +
> + ret = hid_parse(hdev);
> + if (ret) {
> + hid_err(hdev, "EVision hid parse failed: %d\n", ret);
> + return ret;
> + }
> +
> + ret = hid_hw_start(hdev, HID_CONNECT_DEFAULT);
> + if (ret) {
> + hid_err(hdev, "EVision hw start failed: %d\n", ret);
> + return ret;
> + }
> +
> + return 0;
... which means the probe is the default one, meaning it can also be
dropped from the patch :)
> +}
> +
> +static const struct hid_device_id evision_devices[] = {
> + { HID_USB_DEVICE(USB_VENDOR_ID_EVISION, USB_DEVICE_ID_EVISION_ICL01) },
> + { }
> +};
> +MODULE_DEVICE_TABLE(hid, evision_devices);
> +
> +static struct hid_driver evision_driver = {
> + .name = "evision",
> + .id_table = evision_devices,
> + .input_mapping = evision_input_mapping,
> + .probe = evision_probe,
Just for completeness, remove that .probe line and your driver will
behave the same and be smaller :)
> +};
> +module_hid_driver(evision_driver);
> +
> +MODULE_LICENSE("GPL");
> --
> 2.38.2
>
Cheers,
Benjamin
From: Philippe Valembois <[email protected]>
For now only supports one model and only filters out bogus reports sent
when the keyboard has been configured through hidraw.
Without this, as events are not released, soft repeat floods userspace
with unknown key events.
Signed-off-by: Philippe Valembois <[email protected]>
---
drivers/hid/Kconfig | 7 ++++++
drivers/hid/Makefile | 1 +
drivers/hid/hid-evision.c | 53 +++++++++++++++++++++++++++++++++++++++
drivers/hid/hid-ids.h | 3 +++
4 files changed, 64 insertions(+)
create mode 100644 drivers/hid/hid-evision.c
diff --git a/drivers/hid/Kconfig b/drivers/hid/Kconfig
index e2a5d30c8..35f214773 100644
--- a/drivers/hid/Kconfig
+++ b/drivers/hid/Kconfig
@@ -329,6 +329,13 @@ config HID_ELO
Support for the ELO USB 4000/4500 touchscreens. Note that this is for
different devices than those handled by CONFIG_TOUCHSCREEN_USB_ELO.
+config HID_EVISION
+ tristate "EVision Keyboards Support"
+ depends on HID
+ help
+ Support for some EVision keyboards. Note that this is needed only when
+ applying customization using userspace programs.
+
config HID_EZKEY
tristate "Ezkey BTC 8193 keyboard"
default !EXPERT
diff --git a/drivers/hid/Makefile b/drivers/hid/Makefile
index e8014c1a2..bd01571dd 100644
--- a/drivers/hid/Makefile
+++ b/drivers/hid/Makefile
@@ -45,6 +45,7 @@ obj-$(CONFIG_HID_EMS_FF) += hid-emsff.o
obj-$(CONFIG_HID_ELAN) += hid-elan.o
obj-$(CONFIG_HID_ELECOM) += hid-elecom.o
obj-$(CONFIG_HID_ELO) += hid-elo.o
+obj-$(CONFIG_HID_EVISION) += hid-evision.o
obj-$(CONFIG_HID_EZKEY) += hid-ezkey.o
obj-$(CONFIG_HID_FT260) += hid-ft260.o
obj-$(CONFIG_HID_GEMBIRD) += hid-gembird.o
diff --git a/drivers/hid/hid-evision.c b/drivers/hid/hid-evision.c
new file mode 100644
index 000000000..ef6b4b435
--- /dev/null
+++ b/drivers/hid/hid-evision.c
@@ -0,0 +1,53 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * HID driver for EVision devices
+ * For now, only ignore bogus consumer reports
+ * sent after the keyboard has been configured
+ *
+ * Copyright (c) 2022 Philippe Valembois
+ */
+
+#include <linux/device.h>
+#include <linux/input.h>
+#include <linux/hid.h>
+#include <linux/module.h>
+
+#include "hid-ids.h"
+
+static int evision_input_mapping(struct hid_device *hdev, struct hid_input *hi,
+ struct hid_field *field, struct hid_usage *usage,
+ unsigned long **bit, int *max)
+{
+ if ((usage->hid & HID_USAGE_PAGE) != HID_UP_CONSUMER)
+ return 0;
+
+ /* Ignore key down event */
+ if ((usage->hid & HID_USAGE) >> 8 == 0x05)
+ return -1;
+ /* Ignore key up event */
+ if ((usage->hid & HID_USAGE) >> 8 == 0x06)
+ return -1;
+
+ switch (usage->hid & HID_USAGE) {
+ /* Ignore configuration saved event */
+ case 0x0401: return -1;
+ /* Ignore reset event */
+ case 0x0402: return -1;
+ }
+ return 0;
+}
+
+static const struct hid_device_id evision_devices[] = {
+ { HID_USB_DEVICE(USB_VENDOR_ID_EVISION, USB_DEVICE_ID_EVISION_ICL01) },
+ { }
+};
+MODULE_DEVICE_TABLE(hid, evision_devices);
+
+static struct hid_driver evision_driver = {
+ .name = "evision",
+ .id_table = evision_devices,
+ .input_mapping = evision_input_mapping,
+};
+module_hid_driver(evision_driver);
+
+MODULE_LICENSE("GPL");
diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h
index 0f8c11842..7ae89aebd 100644
--- a/drivers/hid/hid-ids.h
+++ b/drivers/hid/hid-ids.h
@@ -445,6 +445,9 @@
#define USB_VENDOR_ID_EMS 0x2006
#define USB_DEVICE_ID_EMS_TRIO_LINKER_PLUS_II 0x0118
+#define USB_VENDOR_ID_EVISION 0x320f
+#define USB_DEVICE_ID_EVISION_ICL01 0x5041
+
#define USB_VENDOR_ID_FLATFROG 0x25b5
#define USB_DEVICE_ID_MULTITOUCH_3200 0x0002
--
2.39.1
Hello,
Thanks for the review.
I just sent an updated patch taking your comments into account.
Regards,
Philippe Valembois
Le lun. 23 janv. 2023 à 08:57, Benjamin Tissoires
<[email protected]> a écrit :
>
> On Sat, Dec 24, 2022 at 1:23 PM Philippe Valembois
> <[email protected]> wrote:
> >
> > From: Philippe Valembois <[email protected]>
>
> Jiri, I have a doubt. Do we accept emails from users.noreply.github.com?
>
> >
> > For now only supports one model and only filters out bogus reports sent
> > when the keyboard has been configured through hidraw.
> > Without this, as events are not released, soft repeat floods userspace
> > with unknown key events.
> >
> > Signed-off-by: Philippe Valembois <[email protected]>
> > ---
> > drivers/hid/Kconfig | 7 ++++
> > drivers/hid/Makefile | 1 +
> > drivers/hid/hid-evision.c | 79 +++++++++++++++++++++++++++++++++++++++
> > 3 files changed, 87 insertions(+)
> > create mode 100644 drivers/hid/hid-evision.c
> >
> > diff --git a/drivers/hid/Kconfig b/drivers/hid/Kconfig
> > index e2a5d30c8..1320ea75c 100644
> > --- a/drivers/hid/Kconfig
> > +++ b/drivers/hid/Kconfig
> > @@ -329,6 +329,13 @@ config HID_ELO
> > Support for the ELO USB 4000/4500 touchscreens. Note that this is for
> > different devices than those handled by CONFIG_TOUCHSCREEN_USB_ELO.
> >
> > +config HID_EVISION
> > + tristate "EVision Keyboards Support"
> > + depends on USB_HID
>
> AFAICT, the driver only uses pure HID API, so you should be able to
> depend on HID, not just USB_HID.
>
> > + help
> > + Support for some EVision keyboards. Note that this is needed only when
> > + applying customization using userspace programs.
> > +
> > config HID_EZKEY
> > tristate "Ezkey BTC 8193 keyboard"
> > default !EXPERT
> > diff --git a/drivers/hid/Makefile b/drivers/hid/Makefile
> > index e8014c1a2..bd01571dd 100644
> > --- a/drivers/hid/Makefile
> > +++ b/drivers/hid/Makefile
> > @@ -45,6 +45,7 @@ obj-$(CONFIG_HID_EMS_FF) += hid-emsff.o
> > obj-$(CONFIG_HID_ELAN) += hid-elan.o
> > obj-$(CONFIG_HID_ELECOM) += hid-elecom.o
> > obj-$(CONFIG_HID_ELO) += hid-elo.o
> > +obj-$(CONFIG_HID_EVISION) += hid-evision.o
> > obj-$(CONFIG_HID_EZKEY) += hid-ezkey.o
> > obj-$(CONFIG_HID_FT260) += hid-ft260.o
> > obj-$(CONFIG_HID_GEMBIRD) += hid-gembird.o
> > diff --git a/drivers/hid/hid-evision.c b/drivers/hid/hid-evision.c
> > new file mode 100644
> > index 000000000..6ea331575
> > --- /dev/null
> > +++ b/drivers/hid/hid-evision.c
> > @@ -0,0 +1,79 @@
> > +// SPDX-License-Identifier: GPL-2.0-or-later
> > +/*
> > + * HID driver for EVision devices
> > + * For now, only ignore bogus consumer reports
> > + * sent after the keyboard has been configured
> > + *
> > + * Copyright (c) 2022 Philippe Valembois
> > + */
> > +
> > +#include <linux/device.h>
> > +#include <linux/input.h>
> > +#include <linux/hid.h>
> > +#include <linux/module.h>
> > +#include <linux/usb.h>
>
> Outside of hid_is_usb(), you are not using anything USB related, so
> this can be dropped
>
> > +
> > +
> > +#define USB_VENDOR_ID_EVISION 0x320f
> > +#define USB_DEVICE_ID_EVISION_ICL01 0x5041
>
> We tend to add those variables in drivers/hid/hid-ids.h
>
> > +
> > +static int evision_input_mapping(struct hid_device *hdev, struct hid_input *hi,
> > + struct hid_field *field, struct hid_usage *usage,
> > + unsigned long **bit, int *max)
> > +{
> > + if ((usage->hid & HID_USAGE_PAGE) != HID_UP_CONSUMER)
> > + return 0;
> > +
> > + // Ignore key down event
>
> No C++ comments style please, use /* */ instead
>
> > + if ((usage->hid & HID_USAGE) >> 8 == 0x05)
> > + return -1;
> > + // Ignore key up event
>
> Same (and for any other // below).
>
> > + if ((usage->hid & HID_USAGE) >> 8 == 0x06)
> > + return -1;
> > +
> > + switch (usage->hid & HID_USAGE) {
> > + // Ignore configuration saved event
> > + case 0x0401: return -1;
> > + // Ignore reset event
> > + case 0x0402: return -1;
> > + }
> > + return 0;
> > +}
> > +
> > +static int evision_probe(struct hid_device *hdev, const struct hid_device_id *id)
> > +{
> > + int ret;
> > +
> > + if (!hid_is_usb(hdev))
> > + return -EINVAL;
>
> This can be dropped...
>
> > +
> > + ret = hid_parse(hdev);
> > + if (ret) {
> > + hid_err(hdev, "EVision hid parse failed: %d\n", ret);
> > + return ret;
> > + }
> > +
> > + ret = hid_hw_start(hdev, HID_CONNECT_DEFAULT);
> > + if (ret) {
> > + hid_err(hdev, "EVision hw start failed: %d\n", ret);
> > + return ret;
> > + }
> > +
> > + return 0;
>
> ... which means the probe is the default one, meaning it can also be
> dropped from the patch :)
>
> > +}
> > +
> > +static const struct hid_device_id evision_devices[] = {
> > + { HID_USB_DEVICE(USB_VENDOR_ID_EVISION, USB_DEVICE_ID_EVISION_ICL01) },
> > + { }
> > +};
> > +MODULE_DEVICE_TABLE(hid, evision_devices);
> > +
> > +static struct hid_driver evision_driver = {
> > + .name = "evision",
> > + .id_table = evision_devices,
> > + .input_mapping = evision_input_mapping,
> > + .probe = evision_probe,
>
> Just for completeness, remove that .probe line and your driver will
> behave the same and be smaller :)
>
> > +};
> > +module_hid_driver(evision_driver);
> > +
> > +MODULE_LICENSE("GPL");
> > --
> > 2.38.2
> >
>
> Cheers,
> Benjamin
>
On Mon, 23 Jan 2023, Benjamin Tissoires wrote:
> > From: Philippe Valembois <[email protected]>
>
> Jiri, I have a doubt. Do we accept emails from users.noreply.github.com?
From quick search in github documentation, this seems to be a blackhole
email address, right?
If so, I'd much prefer to have a real e-mail address there, in order to
make sure the author / signoff holders can be reached in the future if
there are any concerns regarding the patch.
The e-mail address disclosure concern is moot as soon as the emaill with
the patch hits LKML anyway.
Thanks,
--
Jiri Kosina
SUSE Labs
For now only supports one model and only filters out bogus reports sent
when the keyboard has been configured through hidraw.
Without this, as events are not released, soft repeat floods userspace
with unknown key events.
Signed-off-by: Philippe Valembois <[email protected]>
---
drivers/hid/Kconfig | 7 ++++++
drivers/hid/Makefile | 1 +
drivers/hid/hid-evision.c | 53 +++++++++++++++++++++++++++++++++++++++
drivers/hid/hid-ids.h | 3 +++
4 files changed, 64 insertions(+)
create mode 100644 drivers/hid/hid-evision.c
diff --git a/drivers/hid/Kconfig b/drivers/hid/Kconfig
index e2a5d30c8..35f214773 100644
--- a/drivers/hid/Kconfig
+++ b/drivers/hid/Kconfig
@@ -329,6 +329,13 @@ config HID_ELO
Support for the ELO USB 4000/4500 touchscreens. Note that this is for
different devices than those handled by CONFIG_TOUCHSCREEN_USB_ELO.
+config HID_EVISION
+ tristate "EVision Keyboards Support"
+ depends on HID
+ help
+ Support for some EVision keyboards. Note that this is needed only when
+ applying customization using userspace programs.
+
config HID_EZKEY
tristate "Ezkey BTC 8193 keyboard"
default !EXPERT
diff --git a/drivers/hid/Makefile b/drivers/hid/Makefile
index e8014c1a2..bd01571dd 100644
--- a/drivers/hid/Makefile
+++ b/drivers/hid/Makefile
@@ -45,6 +45,7 @@ obj-$(CONFIG_HID_EMS_FF) += hid-emsff.o
obj-$(CONFIG_HID_ELAN) += hid-elan.o
obj-$(CONFIG_HID_ELECOM) += hid-elecom.o
obj-$(CONFIG_HID_ELO) += hid-elo.o
+obj-$(CONFIG_HID_EVISION) += hid-evision.o
obj-$(CONFIG_HID_EZKEY) += hid-ezkey.o
obj-$(CONFIG_HID_FT260) += hid-ft260.o
obj-$(CONFIG_HID_GEMBIRD) += hid-gembird.o
diff --git a/drivers/hid/hid-evision.c b/drivers/hid/hid-evision.c
new file mode 100644
index 000000000..ef6b4b435
--- /dev/null
+++ b/drivers/hid/hid-evision.c
@@ -0,0 +1,53 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * HID driver for EVision devices
+ * For now, only ignore bogus consumer reports
+ * sent after the keyboard has been configured
+ *
+ * Copyright (c) 2022 Philippe Valembois
+ */
+
+#include <linux/device.h>
+#include <linux/input.h>
+#include <linux/hid.h>
+#include <linux/module.h>
+
+#include "hid-ids.h"
+
+static int evision_input_mapping(struct hid_device *hdev, struct hid_input *hi,
+ struct hid_field *field, struct hid_usage *usage,
+ unsigned long **bit, int *max)
+{
+ if ((usage->hid & HID_USAGE_PAGE) != HID_UP_CONSUMER)
+ return 0;
+
+ /* Ignore key down event */
+ if ((usage->hid & HID_USAGE) >> 8 == 0x05)
+ return -1;
+ /* Ignore key up event */
+ if ((usage->hid & HID_USAGE) >> 8 == 0x06)
+ return -1;
+
+ switch (usage->hid & HID_USAGE) {
+ /* Ignore configuration saved event */
+ case 0x0401: return -1;
+ /* Ignore reset event */
+ case 0x0402: return -1;
+ }
+ return 0;
+}
+
+static const struct hid_device_id evision_devices[] = {
+ { HID_USB_DEVICE(USB_VENDOR_ID_EVISION, USB_DEVICE_ID_EVISION_ICL01) },
+ { }
+};
+MODULE_DEVICE_TABLE(hid, evision_devices);
+
+static struct hid_driver evision_driver = {
+ .name = "evision",
+ .id_table = evision_devices,
+ .input_mapping = evision_input_mapping,
+};
+module_hid_driver(evision_driver);
+
+MODULE_LICENSE("GPL");
diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h
index 0f8c11842..7ae89aebd 100644
--- a/drivers/hid/hid-ids.h
+++ b/drivers/hid/hid-ids.h
@@ -445,6 +445,9 @@
#define USB_VENDOR_ID_EMS 0x2006
#define USB_DEVICE_ID_EMS_TRIO_LINKER_PLUS_II 0x0118
+#define USB_VENDOR_ID_EVISION 0x320f
+#define USB_DEVICE_ID_EVISION_ICL01 0x5041
+
#define USB_VENDOR_ID_FLATFROG 0x25b5
#define USB_DEVICE_ID_MULTITOUCH_3200 0x0002
--
2.39.1
Hello,
It is a blackhole address indeed.
I just sent a v3 with my corrected email address.
Thanks,
Regards,
Philippe Valembois
Le mer. 25 janv. 2023 à 14:27, Jiri Kosina <[email protected]> a écrit :
>
> On Mon, 23 Jan 2023, Benjamin Tissoires wrote:
>
> > > From: Philippe Valembois <[email protected]>
> >
> > Jiri, I have a doubt. Do we accept emails from users.noreply.github.com?
>
> From quick search in github documentation, this seems to be a blackhole
> email address, right?
>
> If so, I'd much prefer to have a real e-mail address there, in order to
> make sure the author / signoff holders can be reached in the future if
> there are any concerns regarding the patch.
>
> The e-mail address disclosure concern is moot as soon as the emaill with
> the patch hits LKML anyway.
>
> Thanks,
>
> --
> Jiri Kosina
> SUSE Labs
>
On Wed, 25 Jan 2023 22:15:10 +0100, Philippe Valembois wrote:
> For now only supports one model and only filters out bogus reports sent
> when the keyboard has been configured through hidraw.
> Without this, as events are not released, soft repeat floods userspace
> with unknown key events.
>
>
Applied to https://git.kernel.org/pub/scm/linux/kernel/git/hid/hid.git (for-6.3/evision), thanks!
[1/1] HID: evision: Add preliminary support for EVision keyboards
https://git.kernel.org/hid/hid/c/f5cd71cfdb5c
Cheers,
--
Benjamin Tissoires <[email protected]>