I was just wondering if someone is working on a fix for this:
i91u: PCI Base=0xD000, IRQ=11, BIOS=0xFF000, SCSI ID=7
i91u: Reset SCSI Bus ...
ERROR: SCSI host `INI9100U' has no error handling
ERROR: This is not a safe way to run your SCSI host
ERROR: The error handling must be added to this driver
[<c02f7728>] scsi_host_alloc+0x2d8/0x2e0
[<c02f774f>] scsi_register+0x1f/0x70
[<c02ffe0f>] i91u_detect+0x1bf/0x2d0
[<c0300440>] i91u_release+0x0/0x46
[<c04e43fe>] init_this_scsi_driver+0x3e/0x100
[<c04c892c>] do_initcalls+0x2c/0xc0
[<c012e1c5>] init_workqueues+0x15/0x2c
[<c01004ba>] init+0x5a/0x190
[<c0100460>] init+0x0/0x190
[<c0104035>] kernel_thread_helper+0x5/0x10
scsi0 : Initio INI-9X00U/UW SCSI device driver; Revision: 1.03g
scsi: Device offlined - not ready after error recovery: host 0 channel 0
id 0 lun 0
scsi: Device offlined - not ready after error recovery: host 0 channel 0
id 2 lun 0
scsi: Device offlined - not ready after error recovery: host 0 channel 0
id 4 lun 0
On Mon, Apr 26, 2004 at 01:24:34PM +0200, Mirko Caserta wrote:
> I was just wondering if someone is working on a fix for this:
>
> i91u: PCI Base=0xD000, IRQ=11, BIOS=0xFF000, SCSI ID=7
> i91u: Reset SCSI Bus ...
> ERROR: SCSI host `INI9100U' has no error handling
> ERROR: This is not a safe way to run your SCSI host
...
Try the attached; I wrote it a while back and made a cleanup based on
comments from James Bottomley, but no one else seemed to be using the
driver. It worked for me however.
J.
--
] http://www.earth.li/~noodles/ [] Hitler and a TGB. On a bike. At [
] PGP/GPG Key @ the.earth.li [] 158mph. End of thread. Have a [
] via keyserver, web or email. [] nice 'froup. [
] RSA: 4DC4E7FD / DSA: 5B430367 [] [