This one is just for the record, as it doesn't appear to have had
any side effects...
Dell Latitude D610, uptodate FC4, kernel 2.6.15-rc5, booted with
libata.atapi_enabled=1.
Dec 10 19:33:26 sandman kernel: cdrom: This disc doesn't have any
tracks I recognize!
Dec 10 19:35:21 sandman kernel: Assertion failed! qc->n_elem >
0,drivers/scsi/libata-core.c,ata_fill_sg,line=2482
Dec 10 19:35:35 sandman last message repeated 18 times
This happened presumably when I earlier burned a CD-R
with .wav audio tracks; the burning was successful.
Drive is detected as follows:
ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xBFA8 irq 15
ata2: dev 0 cfg 49:0b00 82:0210 83:1000 84:0000 85:0000 86:0000 87:0000 88:0407
ata2: dev 0 ATAPI, max UDMA/33
ata2: dev 0 configured for UDMA/33
scsi1 : ata_piix
Vendor: SONY Model: DVD+-RW DW-Q58A Rev: UDS1
Type: CD-ROM ANSI SCSI revision: 05
--alessandro
"So much can happen by accident
No rhyme, no reason - no one's innocent"
(Steve Wynn - "Under The Weather")
Il Sat, 10 Dec 2005 21:30:09 +0100, Alessandro Suardi ha scritto:
> This one is just for the record, as it doesn't appear to have had
> any side effects...
>
> Dell Latitude D610, uptodate FC4, kernel 2.6.15-rc5, booted with
> libata.atapi_enabled=1.
> Dec 10 19:33:26 sandman kernel: cdrom: This disc doesn't have any tracks
> I recognize!
> Dec 10 19:35:21 sandman kernel: Assertion failed! qc->n_elem >
> 0,drivers/scsi/libata-core.c,ata_fill_sg,line=2482 Dec 10 19:35:35
> sandman last message repeated 18 times
>
> This happened presumably when I earlier burned a CD-R
> with .wav audio tracks; the burning was successful.
>
Here I've a new Dell Inspiron 6000 with Debian Sid and I see similar
messages in dmesg (2.6.14) when I start k3b.
I've to say that libata.atapi_enabled=1 trick doesn't work for me (neither
modprobe.conf option) and I need to change that value directly in
libata-core.c.
Few days ago, I've tried a newer 2.6.15-rc4 with Jeff libata1 patch, and I
see tons of these in the log:
Dec ?1 13:14:56 Chiba kernel: ata2: no sense translation for error 0x20
Dec ?1 13:14:56 Chiba kernel: ata2: no sense translation for status: 0x51
Dec ?1 13:14:56 Chiba kernel: ata2: no sense translation for error 0x20
Dec ?1 13:14:56 Chiba kernel: ata2: no sense translation for status: 0x51
Dec ?1 13:14:56 Chiba kernel: ata2: no sense translation for error 0x20
Dec ?1 13:14:56 Chiba kernel: ata2: no sense translation for status: 0x51
Dec ?1 13:14:56 Chiba kernel: ata2: no sense translation for error 0x20
Dec ?1 13:14:56 Chiba kernel: ata2: no sense translation for status: 0x51
Dec ?1 13:14:56 Chiba kernel: ata2: no sense translation for error 0x20
Dec ?1 13:14:56 Chiba kernel: ata2: no sense translation for status: 0x51
Dec ?1 13:14:56 Chiba kernel: ata2: no sense translation for error 0x20
Dec ?1 13:14:56 Chiba kernel: ata2: no sense translation for status: 0x51
Dec ?1 13:14:56 Chiba kernel: sr: Current [descriptor]: sense key=0x3
Dec ?1 13:14:56 Chiba kernel: ? ? ASC=0x11 ASCQ=0x4
Dec ?1 13:14:58 Chiba kernel: ata2: no sense translation for error 0x20
Dec ?1 13:14:58 Chiba kernel: ata2: no sense translation for status: 0x51
Dec ?1 13:14:58 Chiba kernel: ata2: no sense translation for error 0x20
Dec ?1 13:14:58 Chiba kernel: ata2: no sense translation for status: 0x51
Dec ?1 13:14:58 Chiba kernel: ata2: no sense translation for error 0x20
Dec ?1 13:14:58 Chiba kernel: ata2: no sense translation for status: 0x51
Dec ?1 13:14:58 Chiba kernel: ata2: no sense translation for error 0x20
Dec ?1 13:14:58 Chiba kernel: ata2: no sense translation for status: 0x51
and kde hangs in one of the steps of ksplash before showing desktop ( I
think, trying to discover media, such as cdrom, usb pen drive and so on).
> Drive is detected as follows:
>
> ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xBFA8 irq 15 ata2:
> dev 0 cfg 49:0b00 82:0210 83:1000 84:0000 85:0000 86:0000 87:0000
> 88:0407 ata2: dev 0 ATAPI, max UDMA/33 ata2: dev 0 configured for
> UDMA/33
> scsi1 : ata_piix
> Vendor: SONY Model: DVD+-RW DW-Q58A Rev: UDS1 Type: CD-ROM
> ANSI SCSI revision: 05
ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xBFA8 irq 15
ata2: dev 0 cfg 49:0f00 82:4218 83:5000 84:4000 85:4218 86:1000 87:4000
88:0407
ata2: dev 0 ATAPI, max UDMA/33
ata2(0): applying bridge limits
ata2: dev 0 configured for UDMA/33
scsi1 : ata_piix
? Vendor: TSSTcorp ?Model: DVD+-RW TS-L532B ?Rev: DE03
? Type: ? CD-ROM ? ? ? ? ? ? ? ? ? ? ? ? ? ? ANSI SCSI revision: 05
sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
Thanks in advance!
PS: To Jeff Garzik: I try to sent you two mails about this bug but I
think they were not correctly delivered... sigh!
--
Il reggiseno e' uno strumento democratico perche' separa la destra dalla
sinistra, solleva le masse e attira i popoli.
http://www.debianizzati.org | Founder Member
Mario "Ldonesty" Di Nitto --- [Linux Registered User #334335]