To use this option pass '--zc' parameter:
./vsock_perf --zc --sender <cid> --port <port> --bytes <bytes to send>
With this option MSG_ZEROCOPY flag will be passed to the 'send()' call.
Signed-off-by: Arseniy Krasnov <[email protected]>
---
tools/testing/vsock/vsock_perf.c | 143 +++++++++++++++++++++++++++++--
1 file changed, 134 insertions(+), 9 deletions(-)
diff --git a/tools/testing/vsock/vsock_perf.c b/tools/testing/vsock/vsock_perf.c
index a72520338f84..f0f183f3f9e8 100644
--- a/tools/testing/vsock/vsock_perf.c
+++ b/tools/testing/vsock/vsock_perf.c
@@ -18,6 +18,8 @@
#include <poll.h>
#include <sys/socket.h>
#include <linux/vm_sockets.h>
+#include <sys/mman.h>
+#include <linux/errqueue.h>
#define DEFAULT_BUF_SIZE_BYTES (128 * 1024)
#define DEFAULT_TO_SEND_BYTES (64 * 1024)
@@ -28,9 +30,18 @@
#define BYTES_PER_GB (1024 * 1024 * 1024ULL)
#define NSEC_PER_SEC (1000000000ULL)
+#ifndef SOL_VSOCK
+#define SOL_VSOCK 287
+#endif
+
+#ifndef VSOCK_RECVERR
+#define VSOCK_RECVERR 1
+#endif
+
static unsigned int port = DEFAULT_PORT;
static unsigned long buf_size_bytes = DEFAULT_BUF_SIZE_BYTES;
static unsigned long vsock_buf_bytes = DEFAULT_VSOCK_BUF_BYTES;
+static bool zerocopy;
static void error(const char *s)
{
@@ -247,15 +258,76 @@ static void run_receiver(unsigned long rcvlowat_bytes)
close(fd);
}
+static void recv_completion(int fd)
+{
+ struct sock_extended_err *serr;
+ char cmsg_data[128];
+ struct cmsghdr *cm;
+ struct msghdr msg = { 0 };
+ ssize_t ret;
+
+ msg.msg_control = cmsg_data;
+ msg.msg_controllen = sizeof(cmsg_data);
+
+ ret = recvmsg(fd, &msg, MSG_ERRQUEUE);
+ if (ret) {
+ fprintf(stderr, "recvmsg: failed to read err: %zi\n", ret);
+ return;
+ }
+
+ cm = CMSG_FIRSTHDR(&msg);
+ if (!cm) {
+ fprintf(stderr, "cmsg: no cmsg\n");
+ return;
+ }
+
+ if (cm->cmsg_level != SOL_VSOCK) {
+ fprintf(stderr, "cmsg: unexpected 'cmsg_level'\n");
+ return;
+ }
+
+ if (cm->cmsg_type != VSOCK_RECVERR) {
+ fprintf(stderr, "cmsg: unexpected 'cmsg_type'\n");
+ return;
+ }
+
+ serr = (void *)CMSG_DATA(cm);
+ if (serr->ee_origin != SO_EE_ORIGIN_ZEROCOPY) {
+ fprintf(stderr, "serr: wrong origin\n");
+ return;
+ }
+
+ if (serr->ee_errno) {
+ fprintf(stderr, "serr: wrong error code\n");
+ return;
+ }
+
+ if (zerocopy && (serr->ee_code & SO_EE_CODE_ZEROCOPY_COPIED))
+ fprintf(stderr, "warning: copy instead of zerocopy\n");
+}
+
+static void enable_so_zerocopy(int fd)
+{
+ int val = 1;
+
+ if (setsockopt(fd, SOL_SOCKET, SO_ZEROCOPY, &val, sizeof(val)))
+ error("setsockopt(SO_ZEROCOPY)");
+}
+
static void run_sender(int peer_cid, unsigned long to_send_bytes)
{
time_t tx_begin_ns;
time_t tx_total_ns;
size_t total_send;
+ time_t time_in_send;
void *data;
int fd;
- printf("Run as sender\n");
+ if (zerocopy)
+ printf("Run as sender MSG_ZEROCOPY\n");
+ else
+ printf("Run as sender\n");
+
printf("Connect to %i:%u\n", peer_cid, port);
printf("Send %lu bytes\n", to_send_bytes);
printf("TX buffer %lu bytes\n", buf_size_bytes);
@@ -265,38 +337,82 @@ static void run_sender(int peer_cid, unsigned long to_send_bytes)
if (fd < 0)
exit(EXIT_FAILURE);
- data = malloc(buf_size_bytes);
+ if (zerocopy) {
+ enable_so_zerocopy(fd);
- if (!data) {
- fprintf(stderr, "'malloc()' failed\n");
- exit(EXIT_FAILURE);
+ data = mmap(NULL, buf_size_bytes, PROT_READ | PROT_WRITE,
+ MAP_PRIVATE | MAP_ANONYMOUS, -1, 0);
+ if (data == MAP_FAILED) {
+ perror("mmap");
+ exit(EXIT_FAILURE);
+ }
+ } else {
+ data = malloc(buf_size_bytes);
+
+ if (!data) {
+ fprintf(stderr, "'malloc()' failed\n");
+ exit(EXIT_FAILURE);
+ }
}
memset(data, 0, buf_size_bytes);
total_send = 0;
+ time_in_send = 0;
tx_begin_ns = current_nsec();
while (total_send < to_send_bytes) {
ssize_t sent;
+ size_t rest_bytes;
+ time_t before;
- sent = write(fd, data, buf_size_bytes);
+ rest_bytes = to_send_bytes - total_send;
+
+ before = current_nsec();
+ sent = send(fd, data, (rest_bytes > buf_size_bytes) ?
+ buf_size_bytes : rest_bytes,
+ zerocopy ? MSG_ZEROCOPY : 0);
+ time_in_send += (current_nsec() - before);
if (sent <= 0)
error("write");
total_send += sent;
+
+ if (zerocopy) {
+ struct pollfd fds = { 0 };
+
+ fds.fd = fd;
+
+ if (poll(&fds, 1, -1) < 0) {
+ perror("poll");
+ exit(EXIT_FAILURE);
+ }
+
+ if (!(fds.revents & POLLERR)) {
+ fprintf(stderr, "POLLERR expected\n");
+ exit(EXIT_FAILURE);
+ }
+
+ recv_completion(fd);
+ }
}
tx_total_ns = current_nsec() - tx_begin_ns;
printf("total bytes sent: %zu\n", total_send);
printf("tx performance: %f Gbits/s\n",
- get_gbps(total_send * 8, tx_total_ns));
- printf("total time in 'write()': %f sec\n",
+ get_gbps(total_send * 8, time_in_send));
+ printf("total time in tx loop: %f sec\n",
(float)tx_total_ns / NSEC_PER_SEC);
+ printf("time in 'send()': %f sec\n",
+ (float)time_in_send / NSEC_PER_SEC);
close(fd);
- free(data);
+
+ if (zerocopy)
+ munmap(data, buf_size_bytes);
+ else
+ free(data);
}
static const char optstring[] = "";
@@ -336,6 +452,11 @@ static const struct option longopts[] = {
.has_arg = required_argument,
.val = 'R',
},
+ {
+ .name = "zc",
+ .has_arg = no_argument,
+ .val = 'Z',
+ },
{},
};
@@ -351,6 +472,7 @@ static void usage(void)
" --help This message\n"
" --sender <cid> Sender mode (receiver default)\n"
" <cid> of the receiver to connect to\n"
+ " --zc Enable zerocopy\n"
" --port <port> Port (default %d)\n"
" --bytes <bytes>KMG Bytes to send (default %d)\n"
" --buf-size <bytes>KMG Data buffer size (default %d). In sender mode\n"
@@ -413,6 +535,9 @@ int main(int argc, char **argv)
case 'H': /* Help. */
usage();
break;
+ case 'Z': /* Zerocopy. */
+ zerocopy = true;
+ break;
default:
usage();
}
--
2.25.1
On Sun, Oct 01, 2023 at 12:03:07AM +0300, Arseniy Krasnov wrote:
>To use this option pass '--zc' parameter:
--zerocopy would be better IMHO
>
>./vsock_perf --zc --sender <cid> --port <port> --bytes <bytes to send>
>
>With this option MSG_ZEROCOPY flag will be passed to the 'send()' call.
>
>Signed-off-by: Arseniy Krasnov <[email protected]>
>---
> tools/testing/vsock/vsock_perf.c | 143 +++++++++++++++++++++++++++++--
> 1 file changed, 134 insertions(+), 9 deletions(-)
>
>diff --git a/tools/testing/vsock/vsock_perf.c b/tools/testing/vsock/vsock_perf.c
>index a72520338f84..f0f183f3f9e8 100644
>--- a/tools/testing/vsock/vsock_perf.c
>+++ b/tools/testing/vsock/vsock_perf.c
>@@ -18,6 +18,8 @@
> #include <poll.h>
> #include <sys/socket.h>
> #include <linux/vm_sockets.h>
>+#include <sys/mman.h>
>+#include <linux/errqueue.h>
>
> #define DEFAULT_BUF_SIZE_BYTES (128 * 1024)
> #define DEFAULT_TO_SEND_BYTES (64 * 1024)
>@@ -28,9 +30,18 @@
> #define BYTES_PER_GB (1024 * 1024 * 1024ULL)
> #define NSEC_PER_SEC (1000000000ULL)
>
>+#ifndef SOL_VSOCK
>+#define SOL_VSOCK 287
>+#endif
>+
>+#ifndef VSOCK_RECVERR
>+#define VSOCK_RECVERR 1
>+#endif
>+
> static unsigned int port = DEFAULT_PORT;
> static unsigned long buf_size_bytes = DEFAULT_BUF_SIZE_BYTES;
> static unsigned long vsock_buf_bytes = DEFAULT_VSOCK_BUF_BYTES;
>+static bool zerocopy;
>
> static void error(const char *s)
> {
>@@ -247,15 +258,76 @@ static void run_receiver(unsigned long rcvlowat_bytes)
> close(fd);
> }
>
>+static void recv_completion(int fd)
>+{
>+ struct sock_extended_err *serr;
>+ char cmsg_data[128];
>+ struct cmsghdr *cm;
>+ struct msghdr msg = { 0 };
>+ ssize_t ret;
>+
>+ msg.msg_control = cmsg_data;
>+ msg.msg_controllen = sizeof(cmsg_data);
>+
>+ ret = recvmsg(fd, &msg, MSG_ERRQUEUE);
>+ if (ret) {
>+ fprintf(stderr, "recvmsg: failed to read err: %zi\n", ret);
>+ return;
>+ }
>+
>+ cm = CMSG_FIRSTHDR(&msg);
>+ if (!cm) {
>+ fprintf(stderr, "cmsg: no cmsg\n");
>+ return;
>+ }
>+
>+ if (cm->cmsg_level != SOL_VSOCK) {
>+ fprintf(stderr, "cmsg: unexpected 'cmsg_level'\n");
>+ return;
>+ }
>+
>+ if (cm->cmsg_type != VSOCK_RECVERR) {
>+ fprintf(stderr, "cmsg: unexpected 'cmsg_type'\n");
>+ return;
>+ }
>+
>+ serr = (void *)CMSG_DATA(cm);
>+ if (serr->ee_origin != SO_EE_ORIGIN_ZEROCOPY) {
>+ fprintf(stderr, "serr: wrong origin\n");
>+ return;
>+ }
>+
>+ if (serr->ee_errno) {
>+ fprintf(stderr, "serr: wrong error code\n");
>+ return;
>+ }
>+
>+ if (zerocopy && (serr->ee_code & SO_EE_CODE_ZEROCOPY_COPIED))
>+ fprintf(stderr, "warning: copy instead of zerocopy\n");
>+}
>+
>+static void enable_so_zerocopy(int fd)
>+{
>+ int val = 1;
>+
>+ if (setsockopt(fd, SOL_SOCKET, SO_ZEROCOPY, &val, sizeof(val)))
>+ error("setsockopt(SO_ZEROCOPY)");
>+}
We use enable_so_zerocopy() in a single place, maybe we can put this
code there.
Anyway it seems we are copy & paste some codes from util, etc.
Would make sense create a new header to use on both tests and perf?
>+
> static void run_sender(int peer_cid, unsigned long to_send_bytes)
> {
> time_t tx_begin_ns;
> time_t tx_total_ns;
> size_t total_send;
>+ time_t time_in_send;
> void *data;
> int fd;
>
>- printf("Run as sender\n");
>+ if (zerocopy)
>+ printf("Run as sender MSG_ZEROCOPY\n");
>+ else
>+ printf("Run as sender\n");
>+
> printf("Connect to %i:%u\n", peer_cid, port);
> printf("Send %lu bytes\n", to_send_bytes);
> printf("TX buffer %lu bytes\n", buf_size_bytes);
>@@ -265,38 +337,82 @@ static void run_sender(int peer_cid, unsigned long to_send_bytes)
> if (fd < 0)
> exit(EXIT_FAILURE);
>
>- data = malloc(buf_size_bytes);
>+ if (zerocopy) {
>+ enable_so_zerocopy(fd);
>
>- if (!data) {
>- fprintf(stderr, "'malloc()' failed\n");
>- exit(EXIT_FAILURE);
>+ data = mmap(NULL, buf_size_bytes, PROT_READ | PROT_WRITE,
>+ MAP_PRIVATE | MAP_ANONYMOUS, -1, 0);
>+ if (data == MAP_FAILED) {
>+ perror("mmap");
>+ exit(EXIT_FAILURE);
>+ }
>+ } else {
>+ data = malloc(buf_size_bytes);
>+
>+ if (!data) {
>+ fprintf(stderr, "'malloc()' failed\n");
>+ exit(EXIT_FAILURE);
>+ }
> }
>
> memset(data, 0, buf_size_bytes);
> total_send = 0;
>+ time_in_send = 0;
> tx_begin_ns = current_nsec();
>
> while (total_send < to_send_bytes) {
> ssize_t sent;
>+ size_t rest_bytes;
>+ time_t before;
>
>- sent = write(fd, data, buf_size_bytes);
>+ rest_bytes = to_send_bytes - total_send;
>+
>+ before = current_nsec();
>+ sent = send(fd, data, (rest_bytes > buf_size_bytes) ?
>+ buf_size_bytes : rest_bytes,
>+ zerocopy ? MSG_ZEROCOPY : 0);
>+ time_in_send += (current_nsec() - before);
>
> if (sent <= 0)
> error("write");
>
> total_send += sent;
>+
>+ if (zerocopy) {
>+ struct pollfd fds = { 0 };
>+
>+ fds.fd = fd;
>+
>+ if (poll(&fds, 1, -1) < 0) {
>+ perror("poll");
>+ exit(EXIT_FAILURE);
>+ }
>+
>+ if (!(fds.revents & POLLERR)) {
>+ fprintf(stderr, "POLLERR expected\n");
>+ exit(EXIT_FAILURE);
>+ }
>+
>+ recv_completion(fd);
>+ }
> }
>
> tx_total_ns = current_nsec() - tx_begin_ns;
>
> printf("total bytes sent: %zu\n", total_send);
> printf("tx performance: %f Gbits/s\n",
>- get_gbps(total_send * 8, tx_total_ns));
>- printf("total time in 'write()': %f sec\n",
>+ get_gbps(total_send * 8, time_in_send));
>+ printf("total time in tx loop: %f sec\n",
> (float)tx_total_ns / NSEC_PER_SEC);
>+ printf("time in 'send()': %f sec\n",
>+ (float)time_in_send / NSEC_PER_SEC);
>
> close(fd);
>- free(data);
>+
>+ if (zerocopy)
>+ munmap(data, buf_size_bytes);
>+ else
>+ free(data);
> }
>
> static const char optstring[] = "";
>@@ -336,6 +452,11 @@ static const struct option longopts[] = {
> .has_arg = required_argument,
> .val = 'R',
> },
>+ {
>+ .name = "zc",
>+ .has_arg = no_argument,
>+ .val = 'Z',
>+ },
> {},
> };
>
>@@ -351,6 +472,7 @@ static void usage(void)
> " --help This message\n"
> " --sender <cid> Sender mode (receiver default)\n"
> " <cid> of the receiver to connect to\n"
>+ " --zc Enable zerocopy\n"
Should we specify that this is used only in the sender?
> " --port <port> Port (default %d)\n"
> " --bytes <bytes>KMG Bytes to send (default %d)\n"
> " --buf-size <bytes>KMG Data buffer size (default %d). In sender mode\n"
>@@ -413,6 +535,9 @@ int main(int argc, char **argv)
> case 'H': /* Help. */
> usage();
> break;
>+ case 'Z': /* Zerocopy. */
>+ zerocopy = true;
>+ break;
> default:
> usage();
> }
>--
>2.25.1
>