2003-05-13 12:41:42

by Andreas Happe

[permalink] [raw]
Subject: [ACPI-1121] Method execution failed

kernel version: 2.5.69-bk7,
hardware: hp omnibook 6100, i830m

the kernel boots (which is a huge improvement compared to older
releases, thanks), but i get the attached error.

After the system is booted there's a interessting situation, some parts
of acpi seem to be loaded (i have /proc/thermal_zone et al (shoudn't it
be /proc/acpi/* ?)), but they don't work.

The interessting bootup lines (apic is disabled):

| ACPI: RSDP (v000 PTLTD ) @ 0x000f6610
| ACPI: RSDT (v001 PTLTD EBRSDT 00576.00000) @ 0x0ff682e4
| ACPI: FADT (v001 QUANTA EBmador 00576.00000) @ 0x0ff73b64
| ACPI: BOOT (v001 PTLTD EBBFTBL$ 00576.00000) @ 0x0ff73bd8
| ACPI: DSDT (v001 HP-MCD EB DSDT 00576.00000) @ 0x00000000
| ACPI: BIOS passes blacklist
...
| ACPI: Subsystem revision 20030418
| ACPI-1121: *** Error: Method execution failed [\_SB_.PCI0.HUB_.FDS_.
| FCB1.CSID] (Node c12c55c0), AE_NOT_EXIST
| ACPI-1121: *** Error: Method execution failed
| [\_SB_.PCI0.HUB_.FDS_._REG] (Node c12c5940), AE_NOT_EXIST
| ACPI: Unable to start the ACPI Interpreter
...
| ACPI: ACPI tables contain no PCI IRQ routing entries

thx,
andreas