> On Mar 6, 2024, at 01:50, Yangyu Chen <[email protected]> wrote:
>
> The last email was not received in the list due to I didn’t change the mode
> to plaintext. Sorry for that. This is a resend email.
>
>> On Mar 6, 2024, at 01:20, Conor Dooley <[email protected]> wrote:
>>
>> On Tue, Mar 05, 2024 at 03:47:15PM +0800, Yangyu Chen wrote:
>>> On 2024/3/5 07:46, Damien Le Moal wrote:
>>>> On 3/5/24 06:05, Yangyu Chen wrote:
>>>>> Since K230 was released, SOC_CANAAN is no longer only referred to the K210.
>>>>> Remove it depends on !MMU will allow building dts for K230 and remove the
>>>>> K210 string from the help message.
>>>>>
>>>>> Signed-off-by: Yangyu Chen <[email protected]>
>>>>> Reviewed-by: Conor Dooley <[email protected]>
>>>>> ---
>>>>> arch/riscv/Kconfig.socs | 5 ++---
>>>>> 1 file changed, 2 insertions(+), 3 deletions(-)
>>>>>
>>>>> diff --git a/arch/riscv/Kconfig.socs b/arch/riscv/Kconfig.socs
>>>>> index 623de5f8a208..b4e9b7f75510 100644
>>>>> --- a/arch/riscv/Kconfig.socs
>>>>> +++ b/arch/riscv/Kconfig.socs
>>>>> @@ -75,13 +75,12 @@ config ARCH_CANAAN
>>>>> def_bool SOC_CANAAN
>>>>> config SOC_CANAAN
>>>>> - bool "Canaan Kendryte K210 SoC"
>>>>> - depends on !MMU
>>>>
>>>> This seems wrong to me. The k210 support does require no-mmu. So why remove
>>>> this ?
>>>
>>> It just allows SOC_CANAAN to be selected when MMU=y. With this patch,
>>> nommu_k210_defconfig still works.
>>
>> I think the concern here is that this would allow people to build a
>> kernel for the k120 with the MMU enabled, not that the existing nommu
>> build will be affected.
>>
>
> Aha. I don't think is there anyone will try a build with MMU on
> K210. It only has 6MB of memory available to the CPU. For rv64 if
> the S-Mode software starts at 2MB, it will only have 4MB for S-Mode
> Linux. It's hard to trim the kernel and fit in 4MB and even preserve
> some memory for userspace.
>
> I also tried to make nommu_k210_defconfig on gcc 13.2.0, it produced a
> 1.6M kernel in arch/riscv/boot/Image. But if I use nconfig to set
> CONFIG_MMU=y and rebuild, the kernel file will increase to 11M.
>
Another interesting finding is that the root cause of the huge kernel is
because CONFIG_STRICT_KERNEL_RWX. If we turn it off, the size will
reduced to 1.9M. Not so much for userspace but seems ok to boot.
That is because we defined SECTION_ALIGN to 2MB to fit with one PMD on
rv64 to reduce the miss of TLB. However, it increased the kernel size.
Link: https://lore.kernel.org/linux-riscv/d78c601d553dde791057b54252064221f960546e.1586332296.git.zong.li@sifive.com/
I know MMU on K210 is not standard as now.
Maybe I should care about that. I will fix this for patch v4.
>> Maybe you could squash in something like the following?
>>
>> diff --git a/arch/riscv/Kconfig.socs b/arch/riscv/Kconfig.socs
>> index b4e9b7f75510..75d55059163f 100644
>> --- a/arch/riscv/Kconfig.socs
>> +++ b/arch/riscv/Kconfig.socs
>> @@ -72,15 +72,19 @@ config SOC_VIRT
>> This enables support for QEMU Virt Machine.
>>
>> config ARCH_CANAAN
>> - def_bool SOC_CANAAN
>> + bool "Canaan Kendryte SoCs"
>> + help
>> + This enables support for Canaan Kendryte SoC platform hardware.
>>
>> config SOC_CANAAN
>> - bool "Canaan Kendryte SoC"
>> + bool "Canaan Kendryte K210 SoC"
>> + depends on !MMU
>> + depends on ARCH_CANAAN
>> select CLINT_TIMER if RISCV_M_MODE
>> select ARCH_HAS_RESET_CONTROLLER
>> select PINCTRL
>> select COMMON_CLK
>> help
>> - This enables support for Canaan Kendryte SoC platform hardware.
>> + This enables support for Canaan Kendryte K210 SoC platform hardware.
>>
>> endmenu # "SoC selection"
>>
>> (Which reminds me, I really need to go and finish sorting out the ARCH_
>> stuff)
>
> Seems like an idea if we want this consideration. But I don't think we need
> this as the opinions shown above.
>
> If it should be, I think SOC_CANAAN should be renamed to SOC_K210 or
> SOC_CANAAN_K210.
>