Subject: [tip:x86/urgent] x86/entry: Add some paranoid entry/exit CR3 handling comments

Commit-ID: 16561f27f94e6193ee8f5b9b74801e1668c86efc
Gitweb: https://git.kernel.org/tip/16561f27f94e6193ee8f5b9b74801e1668c86efc
Author: Dave Hansen <[email protected]>
AuthorDate: Fri, 12 Oct 2018 16:21:18 -0700
Committer: Thomas Gleixner <[email protected]>
CommitDate: Sun, 14 Oct 2018 11:11:22 +0200

x86/entry: Add some paranoid entry/exit CR3 handling comments

Andi Kleen was just asking me about the NMI CR3 handling and why
we restore it unconditionally. I was *sure* we had documented it
well. We did not.

Add some documentation. We have common entry code where the CR3
value is stashed, but three places in two big code paths where we
restore it. I put bulk of the comments in this common path and
then refer to it from the other spots.

Signed-off-by: Dave Hansen <[email protected]>
Signed-off-by: Thomas Gleixner <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: "H. Peter Anvin" <[email protected]
Cc: Andy Lutomirski <[email protected]>
Cc: Borislav Petkov <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]

---
arch/x86/entry/entry_64.S | 15 +++++++++++++++
1 file changed, 15 insertions(+)

diff --git a/arch/x86/entry/entry_64.S b/arch/x86/entry/entry_64.S
index 957dfb693ecc..1d9b4a300c8c 100644
--- a/arch/x86/entry/entry_64.S
+++ b/arch/x86/entry/entry_64.S
@@ -1187,6 +1187,18 @@ ENTRY(paranoid_entry)
xorl %ebx, %ebx

1:
+ /*
+ * Always stash CR3 in %r14. This value will be restored,
+ * verbatim, at exit. Needed if kernel is interrupted
+ * after switching to the user CR3 value but before
+ * returning to userspace.
+ *
+ * This is also why CS (stashed in the "iret frame" by the
+ * hardware at entry) can not be used: this may be a return
+ * to kernel code, but with a user CR3 value. The %ebx flag
+ * for SWAPGS is also unusable for CR3 because there is a
+ * window with a user GS and a kernel CR3.
+ */
SAVE_AND_SWITCH_TO_KERNEL_CR3 scratch_reg=%rax save_reg=%r14

ret
@@ -1211,11 +1223,13 @@ ENTRY(paranoid_exit)
testl %ebx, %ebx /* swapgs needed? */
jnz .Lparanoid_exit_no_swapgs
TRACE_IRQS_IRETQ
+ /* Always restore stashed CR3 value (see paranoid_entry) */
RESTORE_CR3 scratch_reg=%rbx save_reg=%r14
SWAPGS_UNSAFE_STACK
jmp .Lparanoid_exit_restore
.Lparanoid_exit_no_swapgs:
TRACE_IRQS_IRETQ_DEBUG
+ /* Always restore stashed CR3 value (see paranoid_entry) */
RESTORE_CR3 scratch_reg=%rbx save_reg=%r14
.Lparanoid_exit_restore:
jmp restore_regs_and_return_to_kernel
@@ -1626,6 +1640,7 @@ end_repeat_nmi:
movq $-1, %rsi
call do_nmi

+ /* Always restore stashed CR3 value (see paranoid_entry) */
RESTORE_CR3 scratch_reg=%r15 save_reg=%r14

testl %ebx, %ebx /* swapgs needed? */


2018-10-14 16:15:01

by Andy Lutomirski

[permalink] [raw]
Subject: Re: [tip:x86/urgent] x86/entry: Add some paranoid entry/exit CR3 handling comments



> On Oct 14, 2018, at 2:17 AM, tip-bot for Dave Hansen <[email protected]> wrote:
>
> Commit-ID: 16561f27f94e6193ee8f5b9b74801e1668c86efc
> Gitweb: https://git.kernel.org/tip/16561f27f94e6193ee8f5b9b74801e1668c86efc
> Author: Dave Hansen <[email protected]>
> AuthorDate: Fri, 12 Oct 2018 16:21:18 -0700
> Committer: Thomas Gleixner <[email protected]>
> CommitDate: Sun, 14 Oct 2018 11:11:22 +0200
>
> x86/entry: Add some paranoid entry/exit CR3 handling comments

Phooey. I *typed* some comments but didn’t hit send. I’ll send a follow up patch.