2021-06-25 09:33:44

by Frank Wunderlich

[permalink] [raw]
Subject: Aw: Re: Re: [PATCH] Fix mt7622.dtsi thermal cpu

> Gesendet: Freitag, 25. Juni 2021 um 11:22 Uhr
> Von: "Daniel Golle" <[email protected]>

> On Fri, Jun 25, 2021 at 10:16:43AM +0200, Frank Wunderlich wrote:
> > Daniel from openwrt have some other mt7622 Boards maybe he can test the Fan approach below
>
> I got Linksys E8450 aka. Belkin RT3200 ( https://fcc.io/K7S-03571 ) as
> well as Ubiquiti UniFi 6 LR ( https://fcc.io/SWX-U6LR ). Both got quite
> massive customized heatsinks (see internal photos on FCC submission),
> which results in much better heat dissipation than just having the
> naked chip like on the BPi-R64.
> Hence I also can't test the fan approach on boards other than the R64.

Do your both mt7622 boards miss the fan-socket or is it not connected to pwm3? then we need to move the fan-parts to mt7622-bananapi-r64.dts instead of mt7622.dtsi

regards Frank


2021-06-25 10:13:03

by Daniel Golle

[permalink] [raw]
Subject: Re: Re: Re: [PATCH] Fix mt7622.dtsi thermal cpu

Hi Frank,

On Fri, Jun 25, 2021 at 11:31:59AM +0200, Frank Wunderlich wrote:
> > Gesendet: Freitag, 25. Juni 2021 um 11:22 Uhr
> > Von: "Daniel Golle" <[email protected]>
>
> > On Fri, Jun 25, 2021 at 10:16:43AM +0200, Frank Wunderlich wrote:
> > > Daniel from openwrt have some other mt7622 Boards maybe he can test the Fan approach below
> >
> > I got Linksys E8450 aka. Belkin RT3200 ( https://fcc.io/K7S-03571 ) as
> > well as Ubiquiti UniFi 6 LR ( https://fcc.io/SWX-U6LR ). Both got quite
> > massive customized heatsinks (see internal photos on FCC submission),
> > which results in much better heat dissipation than just having the
> > naked chip like on the BPi-R64.
> > Hence I also can't test the fan approach on boards other than the R64.
>
> Do your both mt7622 boards miss the fan-socket or is it not connected to pwm3? then we need to move the fan-parts to mt7622-bananapi-r64.dts instead of mt7622.dtsi

There is no fan intended on both devices.
E8450 has an unknown connector which **could** be for a fan, but I
never tried if and how it is actually connected to the SoC.
It could as well be an additional USB 2.0 (as it got 4 pins).

Hence I suggest to add the fan on PWM3 for the BPi-R64 only for now.


Cheers


Daniel