Hi,
This series adds support for CSI2 capture on J721E. It includes some
fixes to the Cadence CSI2RX driver, and adds the TI CSI2RX wrapper driver.
This is a V7 of the below V6 series,
https://lore.kernel.org/all/[email protected]/
Since Pratyush moved out of TI, I will be working on upstreaming the
TI CSI2RX wrapper support.
Tested on TI's J721E EVM with LI OV5640 sensor module.
https://gist.github.com/vaishnavachath/f030a257d5b6569817bc9deab1c4fa77
Also, Tested on TI AM62-SK with Pcam5C OV5640 module.
https://gist.github.com/vaishnavachath/ff2605faa92f1a6ab5670426da28ccee
For all newer TI platforms that TI J721E Silicon Revision 1.0, below update
to DPHY RX driver is needed:
https://lore.kernel.org/all/[email protected]/
Changes in v7:
- For patch 10/13 ("Add CSI2RX support for J721E"):
- Fix incorrect value written in SHIM_PSI_CFG0_DST_TAG
- Drop support for 2X8 formats.
- Update maintainer to Vaishnav as Pratyush moved out of TI.
- Address Sakari's review comments:
- Update MAX_HEIGHT_LINES, MAX_WIDTH_BYTES to prevent overflow.
- Assign dma_slave_config during declaration, drop memset().
- dma_release_channel() on slave_config failure.
- provide entity ops for the vdev entity with link_validate().
- mutex_destroy() on ti_csi2rx_probe failure path.
- Drop busy check in remove().
- mutex_destroy() in ti_csi2rx_remove().
- Address Laurent's review comments:
- Update entries in Makefile in alphabetical order.
- include headers in alphabetical order.
- Drop redundant CSI DT defines and use from media/mipi-csi2.h.
- Rename csi_df to csi_dt.
- Drop v4l2_colorspace from ti_csi2rx_fmt and set default in
ti_csi2rx_v4l2_init()
- Adjust field and not return EINVAL in ti_csi2rx_try_fmt_vid_cap().
- inline ti_csi2rx_video_register().
- start DMA before starting source subdev.
- move buffer cleanup to separate function ti_csi2rx_cleanup_buffers()
to be used in ti_csi2rx_stop_streaming() and ti_csi2rx_start_streaming()
failure path.
- Drop VB2_USERPTR, VB2_READ and V4L2_CAP_READWRITE.
- For patch 4/13 ("media: cadence: csi2rx: Add external DPHY support"):
- Fix multiplier and divider in v4l2_get_link_freq() which caused
failures during streaming.
Changes in v6:
- Move the lock around the dereference for framefmt in
csi2rx_{get,set}_fmt() instead of when we get the pointer.
- Do not return an error when an unsupported format is set. Instead
adjust the code to the first format in the list.
- Drop variable bpp and use fmt->bpp directly.
- Drop variable got_pm. Call phy_pm_runtime_put() unconditionally since
it will just return an error if runtime PM is not enabled.
- Drop transcoding from the commit message.
- Make csi2rx_media_ops const.
Changes in v5:
- Cleanup notifier in csi2rx_parse_dt() after the call to
v4l2_async_nf_add_fwnode_remote().
- Use YUV 1X16 formats instead of 2X8.
- Only error out when phy_pm_runtime_get_sync() returns a negative
value. A positive value can be returned if the phy was already
resumed.
- Do not query the source subdev for format. Use the newly added
internal format instead.
- Make i unsigned.
- Change %d to %u
- Add dependency on PHY_CADENCE_DPHY_RX instead of PHY_CADENCE_DPHY
since the Rx mode DPHY now has a separate driver.
- Drop ti_csi2rx_validate_pipeline(). Pipeline validation should be done
at media_pipeline_start().
- Do not assign flags.
- Fix error handling in ti_csi2rx_start_streaming(). Free up vb2 buffers
when media_pipeline_start() fails.
- Move clock description in comments under the clocks property.
- Make ports required.
- Add link validation to cdns-csi2rx driver.
Changes in v4:
- Drop the call to set PHY submode. It is now being done via compatible
on the DPHY side.
- Acquire the media device's graph_mutex before starting the graph walk.
- Call media_graph_walk_init() and media_graph_walk_cleanup() when
starting and ending the graph walk respectively.
- Reduce max frame height and width in enum_framesizes. Currently they
are set to UINT_MAX but they must be a multiple of step_width, so they
need to be rounded down. Also, these values are absurdly large which
causes some userspace applications like gstreamer to trip up. While it
is not generally right to change the kernel for an application bug, it
is not such a big deal here. This change is replacing one set of
absurdly large arbitrary values with another set of smaller but still
absurdly large arbitrary values. Both limits are unlikely to be hit in
practice.
- Add power-domains property.
- Drop maxItems from clock-names.
- Drop the type for data-lanes.
- Drop uniqueItems from data-lanes. Move it to video-interfaces.yaml
instead.
- Drop OV5640 runtime pm patch. It seems to be a bit complicated and it
is not exactly necessary for this series. Any CSI-2 camera will work
just fine, OV5640 just happens to be the one I tested with. I don't
want it to block this series. I will submit it as a separate patch
later.
Changes in v3:
- Use v4l2_get_link_freq() to calculate pixel clock.
- Move DMA related fields in struct ti_csi2rx_dma.
- Protect DMA buffer queue with a spinlock to make sure the queue buffer
and DMA callback don't race on it.
- Track the current DMA state. It might go idle because of a lack of
buffers. This state can be used to restart it if needed.
- Do not include the current buffer in the pending queue. It is slightly
better modelling than leaving it at the head of the pending queue.
- Use the buffer as the callback argument, and add a reference to csi in it.
- If queueing a buffer to DMA fails, the buffer gets leaked and DMA gets
stalled with. Instead, report the error to vb2 and queue the next
buffer in the pending queue.
- DMA gets stalled if we run out of buffers since the callback is the
only one that fires subsequent transfers and it is no longer being
called. Check for that when queueing buffers and restart DMA if
needed.
- Do not put of node until we are done using the fwnode.
- Set inital format to UYVY 640x480.
- Add compatible: contains: const: cdns,csi2rx to allow SoC specific
compatible.
- Add more constraints for data-lanes property.
Changes in v2:
- Use phy_pm_runtime_get_sync() and phy_pm_runtime_put() before making
calls to set PHY mode, etc. to make sure it is ready.
- Use dmaengine_get_dma_device() instead of directly accessing
dma->device->dev.
- Do not set dst_addr_width when configuring slave DMA.
- Move to a separate subdir and rename to j721e-csi2rx.c
- Convert compatible to ti,j721e-csi2rx.
- Move to use Media Controller centric APIs.
- Improve cleanup in probe when one of the steps fails.
- Add colorspace to formats database.
- Set hw_revision on media_device.
- Move video device initialization to probe time instead of register time.
- Rename to ti,j721e-csi2rx.yaml
- Add an entry in MAINTAINERS.
- Add a description for the binding.
- Change compatible to ti,j721e-csi2rx to make it SoC specific.
- Remove description from dmas, reg, power-domains.
- Remove a limit of 2 from #address-cells and #size-cells.
- Fix add ^ to csi-bridge subnode regex.
- Make ranges mandatory.
- Add unit address in example.
- Add a reference to cdns,csi2rx in csi-bridge subnode.
- Expand the example to include the csi-bridge subnode as well.
- Re-order subject prefixes.
- Convert OV5640 to use runtime PM and drop Cadence CSI2RX s_power patch.
- Drop subdev call wrappers from cdns-csi2rx.
- Move VPE and CAL to a separate subdir.
- Rename ti-csi2rx.c to j721e-csi2rx.c
Pratyush Yadav (13):
media: cadence: csi2rx: Unregister v4l2 async notifier
media: cadence: csi2rx: Cleanup media entity properly
media: cadence: csi2rx: Add get_fmt and set_fmt pad ops
media: cadence: csi2rx: Add external DPHY support
media: cadence: csi2rx: Soft reset the streams before starting capture
media: cadence: csi2rx: Set the STOP bit when stopping a stream
media: cadence: csi2rx: Fix stream data configuration
media: cadence: csi2rx: Populate subdev devnode
media: cadence: csi2rx: Add link validation
media: ti: Add CSI2RX support for J721E
media: dt-bindings: Make sure items in data-lanes are unique
media: dt-bindings: Add DT bindings for TI J721E CSI2RX driver
media: dt-bindings: Convert Cadence CSI2RX binding to YAML
.../devicetree/bindings/media/cdns,csi2rx.txt | 100 --
.../bindings/media/cdns,csi2rx.yaml | 176 +++
.../bindings/media/ti,j721e-csi2rx.yaml | 101 ++
.../bindings/media/video-interfaces.yaml | 1 +
MAINTAINERS | 7 +
drivers/media/platform/cadence/cdns-csi2rx.c | 273 ++++-
drivers/media/platform/ti/Kconfig | 12 +
drivers/media/platform/ti/Makefile | 1 +
.../media/platform/ti/j721e-csi2rx/Makefile | 2 +
.../platform/ti/j721e-csi2rx/j721e-csi2rx.c | 1022 +++++++++++++++++
10 files changed, 1580 insertions(+), 115 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/media/cdns,csi2rx.txt
create mode 100644 Documentation/devicetree/bindings/media/cdns,csi2rx.yaml
create mode 100644 Documentation/devicetree/bindings/media/ti,j721e-csi2rx.yaml
create mode 100644 drivers/media/platform/ti/j721e-csi2rx/Makefile
create mode 100644 drivers/media/platform/ti/j721e-csi2rx/j721e-csi2rx.c
--
2.17.1
On Tue, 2023-03-14 at 17:25 +0530, Vaishnav Achath wrote:
> Hi,
>
> This series adds support for CSI2 capture on J721E. It includes some
> fixes to the Cadence CSI2RX driver, and adds the TI CSI2RX wrapper
> driver.
>
> This is a V7 of the below V6 series,
> https://lore.kernel.org/all/[email protected]/
>
> Since Pratyush moved out of TI, I will be working on upstreaming the
> TI CSI2RX wrapper support.
>
> Tested on TI's J721E EVM with LI OV5640 sensor module.
> https://gist.github.com/vaishnavachath/f030a257d5b6569817bc9deab1c4fa77
>
> Also, Tested on TI AM62-SK with Pcam5C OV5640 module.
> https://gist.github.com/vaishnavachath/ff2605faa92f1a6ab5670426da28ccee
>
Hi Vaishnav,
I assume I'm doing something wrong. I have a TI AM62-SK and the Pcam5C
OV5640 module. I've been trying to test this with gstreamer using the
following command:
gst-launch-1.0 -v v4l2src device=/dev/video0 num-buffers=10 ! video/x-
raw, width=640, height=480, format=UYVY, framerate=30/1 ! jpegenc !
multifilesink location=test%d.jpg
However I've not been able to get this working, failing with this
failure unless I patch in some changes I found in the TI BSP:
[ 28.083635] cdns-mipi-dphy-rx 30110000.phy: DPHY wait for lane ready
timeout
[ 28.090905] cdns-csi2rx 30101000.csi-bridge: Failed to configure
external DPHY: -110
The changes (and the device tree nodes I added, which might be
wrong...) can be found here:
https://gitlab.collabora.com/martyn/linux/-/commits/am625-sk-ov5640
Any ideas what I'm doing wrong?
Martyn
> For all newer TI platforms that TI J721E Silicon Revision 1.0, below
> update
> to DPHY RX driver is needed:
> https://lore.kernel.org/all/[email protected]/
>
> Changes in v7:
> - For patch 10/13 ("Add CSI2RX upport for J721E"):
> - Fix incorrect value written in SHIM_PSI_CFG0_DST_TAG
> - Drop support for 2X8 formats.
> - Update maintainer to Vaishnav as Pratyush moved out of TI.
> - Address Sakari's review comments:
> - Update MAX_HEIGHT_LINES, MAX_WIDTH_BYTES to prevent overflow.
> - Assign dma_slave_config during declaration, drop memset().
> - dma_release_channel() on slave_config failure.
> - provide entity ops for the vdev entity with link_validate().
> - mutex_destroy() on ti_csi2rx_probe failure path.
> - Drop busy check in remove().
> - mutex_destroy() in ti_csi2rx_remove().
> - Address Laurent's review comments:
> - Update entries in Makefile in alphabetical order.
> - include headers in alphabetical order.
> - Drop redundant CSI DT defines and use from media/mipi-csi2.h.
> - Rename csi_df to csi_dt.
> - Drop v4l2_colorspace from ti_csi2rx_fmt and set default in
> ti_csi2rx_v4l2_init()
> - Adjust field and not return EINVAL in ti_csi2rx_try_fmt_vid_cap().
> - inline ti_csi2rx_video_register().
> - start DMA before starting source subdev.
> - move buffer cleanup to separate function
> ti_csi2rx_cleanup_buffers()
> to be used in ti_csi2rx_stop_streaming() and
> ti_csi2rx_start_streaming()
> failure path.
> - Drop VB2_USERPTR, VB2_READ and V4L2_CAP_READWRITE.
> - For patch 4/13 ("media: cadence: csi2rx: Add external DPHY
> support"):
> - Fix multiplier and divider in v4l2_get_link_freq() which caused
> failures during streaming.
>
> Changes in v6:
> - Move the lock around the dereference for framefmt in
> csi2rx_{get,set}_fmt() instead of when we get the pointer.
> - Do not return an error when an unsupported format is set. Instead
> adjust the code to the first format in the list.
> - Drop variable bpp and use fmt->bpp directly.
> - Drop variable got_pm. Call phy_pm_runtime_put() unconditionally
> since
> it will just return an error if runtime PM is not enabled.
> - Drop transcoding from the commit message.
> - Make csi2rx_media_ops const.
>
> Changes in v5:
> - Cleanup notifier in csi2rx_parse_dt() after the call to
> v4l2_async_nf_add_fwnode_remote().
> - Use YUV 1X16 formats instead of 2X8.
> - Only error out when phy_pm_runtime_get_sync() returns a negative
> value. A positive value can be returned if the phy was already
> resumed.
> - Do not query the source subdev for format. Use the newly added
> internal format instead.
> - Make i unsigned.
> - Change %d to %u
> - Add dependency on PHY_CADENCE_DPHY_RX instead of PHY_CADENCE_DPHY
> since the Rx mode DPHY now has a separate driver.
> - Drop ti_csi2rx_validate_pipeline(). Pipeline validation should be
> done
> at media_pipeline_start().
> - Do not assign flags.
> - Fix error handling in ti_csi2rx_start_streaming(). Free up vb2
> buffers
> when media_pipeline_start() fails.
> - Move clock description in comments under the clocks property.
> - Make ports required.
> - Add link validation to cdns-csi2rx driver.
>
> Changes in v4:
> - Drop the call to set PHY submode. It is now being done via
> compatible
> on the DPHY side.
> - Acquire the media device's graph_mutex before starting the graph
> walk.
> - Call media_graph_walk_init() and media_graph_walk_cleanup() when
> starting and ending the graph walk respectively.
> - Reduce max frame height and width in enum_framesizes. Currently
> they
> are set to UINT_MAX but they must be a multiple of step_width, so
> they
> need to be rounded down. Also, these values are absurdly large
> which
> causes some userspace applications like gstreamer to trip up. While
> it
> is not generally right to change the kernel for an application bug,
> it
> is not such a big deal here. This change is replacing one set of
> absurdly large arbitrary values with another set of smaller but
> still
> absurdly large arbitrary values. Both limits are unlikely to be hit
> in
> practice.
> - Add power-domains property.
> - Drop maxItems from clock-names.
> - Drop the type for data-lanes.
> - Drop uniqueItems from data-lanes. Move it to video-interfaces.yaml
> instead.
> - Drop OV5640 runtime pm patch. It seems to be a bit complicated and
> it
> is not exactly necessary for this series. Any CSI-2 camera will
> work
> just fine, OV5640 just happens to be the one I tested with. I don't
> want it to block this series. I will submit it as a separate patch
> later.
>
> Changes in v3:
> - Use v4l2_get_link_freq() to calculate pixel clock.
> - Move DMA related fields in struct ti_csi2rx_dma.
> - Protect DMA buffer queue with a spinlock to make sure the queue
> buffer
> and DMA callback don't race on it.
> - Track the current DMA state. It might go idle because of a lack of
> buffers. This state can be used to restart it if needed.
> - Do not include the current buffer in the pending queue. It is
> slightly
> better modelling than leaving it at the head of the pending queue.
> - Use the buffer as the callback argument, and add a reference to csi
> in it.
> - If queueing a buffer to DMA fails, the buffer gets leaked and DMA
> gets
> stalled with. Instead, report the error to vb2 and queue the next
> buffer in the pending queue.
> - DMA gets stalled if we run out of buffers since the callback is the
> only one that fires subsequent transfers and it is no longer being
> called. Check for that when queueing buffers and restart DMA if
> needed.
> - Do not put of node until we are done using the fwnode.
> - Set inital format to UYVY 640x480.
> - Add compatible: contains: const: cdns,csi2rx to allow SoC specific
> compatible.
> - Add more constraints for data-lanes property.
>
> Changes in v2:
> - Use phy_pm_runtime_get_sync() and phy_pm_runtime_put() before
> making
> calls to set PHY mode, etc. to make sure it is ready.
> - Use dmaengine_get_dma_device() instead of directly accessing
> dma->device->dev.
> - Do not set dst_addr_width when configuring slave DMA.
> - Move to a separate subdir and rename to j721e-csi2rx.c
> - Convert compatible to ti,j721e-csi2rx.
> - Move to use Media Controller centric APIs.
> - Improve cleanup in probe when one of the steps fails.
> - Add colorspace to formats database.
> - Set hw_revision on media_device.
> - Move video device initialization to probe time instead of register
> time.
> - Rename to ti,j721e-csi2rx.yaml
> - Add an entry in MAINTAINERS.
> - Add a description for the binding.
> - Change compatible to ti,j721e-csi2rx to make it SoC specific.
> - Remove description from dmas, reg, power-domains.
> - Remove a limit of 2 from #address-cells and #size-cells.
> - Fix add ^ to csi-bridge subnode regex.
> - Make ranges mandatory.
> - Add unit address in example.
> - Add a reference to cdns,csi2rx in csi-bridge subnode.
> - Expand the example to include the csi-bridge subnode as well.
> - Re-order subject prefixes.
> - Convert OV5640 to use runtime PM and drop Cadence CSI2RX s_power
> patch.
> - Drop subdev call wrappers from cdns-csi2rx.
> - Move VPE and CAL to a separate subdir.
> - Rename ti-csi2rx.c to j721e-csi2rx.c
>
> Pratyush Yadav (13):
> media: cadence: csi2rx: Unregister v4l2 async notifier
> media: cadence: csi2rx: Cleanup media entity properly
> media: cadence: csi2rx: Add get_fmt and set_fmt pad ops
> media: cadence: csi2rx: Add external DPHY support
> media: cadence: csi2rx: Soft reset the streams before starting
> capture
> media: cadence: csi2rx: Set the STOP bit when stopping a stream
> media: cadence: csi2rx: Fix stream data configuration
> media: cadence: csi2rx: Populate subdev devnode
> media: cadence: csi2rx: Add link validation
> media: ti: Add CSI2RX support for J721E
> media: dt-bindings: Make sure items in data-lanes are unique
> media: dt-bindings: Add DT bindings for TI J721E CSI2RX driver
> media: dt-bindings: Convert Cadence CSI2RX binding to YAML
>
> .../devicetree/bindings/media/cdns,csi2rx.txt | 100 --
> .../bindings/media/cdns,csi2rx.yaml | 176 +++
> .../bindings/media/ti,j721e-csi2rx.yaml | 101 ++
> .../bindings/media/video-interfaces.yaml | 1 +
> MAINTAINERS | 7 +
> drivers/media/platform/cadence/cdns-csi2rx.c | 273 ++++-
> drivers/media/platform/ti/Kconfig | 12 +
> drivers/media/platform/ti/Makefile | 1 +
> .../media/platform/ti/j721e-csi2rx/Makefile | 2 +
> .../platform/ti/j721e-csi2rx/j721e-csi2rx.c | 1022
> +++++++++++++++++
> 10 files changed, 1580 insertions(+), 115 deletions(-)
> delete mode 100644
> Documentation/devicetree/bindings/media/cdns,csi2rx.txt
> create mode 100644
> Documentation/devicetree/bindings/media/cdns,csi2rx.yaml
> create mode 100644 Documentation/devicetree/bindings/media/ti,j721e-
> csi2rx.yaml
> create mode 100644 drivers/media/platform/ti/j721e-csi2rx/Makefile
> create mode 100644 drivers/media/platform/ti/j721e-csi2rx/j721e-
> csi2rx.c
>
Hi Martyn,
Thanks for the tests.
On Mar 23, 2023 at 19:36:18 +0000, Martyn Welch wrote:
> On Tue, 2023-03-14 at 17:25 +0530, Vaishnav Achath wrote:
> > Hi,
> >
> > This series adds support for CSI2 capture on J721E. It includes some
> > fixes to the Cadence CSI2RX driver, and adds the TI CSI2RX wrapper
> > driver.
> >
> > This is a V7 of the below V6 series,
> > https://lore.kernel.org/all/[email protected]/
> >
> > Since Pratyush moved out of TI, I will be working on upstreaming the
> > TI CSI2RX wrapper support.
> >
> > Tested on TI's J721E EVM with LI OV5640 sensor module.
> > https://gist.github.com/vaishnavachath/f030a257d5b6569817bc9deab1c4fa77
> >
> > Also, Tested on TI AM62-SK with Pcam5C OV5640 module.
> > https://gist.github.com/vaishnavachath/ff2605faa92f1a6ab5670426da28ccee
> >
>
> Hi Vaishnav,
>
> I assume I'm doing something wrong. I have a TI AM62-SK and the Pcam5C
> OV5640 module. I've been trying to test this with gstreamer using the
> following command:
>
> gst-launch-1.0 -v v4l2src device=/dev/video0 num-buffers=10 ! video/x-
> raw, width=640, height=480, format=UYVY, framerate=30/1 ! jpegenc !
> multifilesink location=test%d.jpg
>
> However I've not been able to get this working, failing with this
> failure unless I patch in some changes I found in the TI BSP:
>
> [ 28.083635] cdns-mipi-dphy-rx 30110000.phy: DPHY wait for lane ready
> timeout
> [ 28.090905] cdns-csi2rx 30101000.csi-bridge: Failed to configure
> external DPHY: -110
That is expected as currently the DPHY driver does not release the SW
reset which all SoCs since J721E SR1.0 expect. See the patch linked by
Vaishnav below.
>
> The changes (and the device tree nodes I added, which might be
> wrong...) can be found here:
>
> https://gitlab.collabora.com/martyn/linux/-/commits/am625-sk-ov5640
>
> Any ideas what I'm doing wrong?
>
> Martyn
>
> > For all newer TI platforms that TI J721E Silicon Revision 1.0, below
> > update
> > to DPHY RX driver is needed:
> > https://lore.kernel.org/all/[email protected]/
^
With that patch and this series on top of linux-next, I was able to get
Pcam5C capturing with SK-AM62. Although I did face issues with the
sensor framerate and had to revert a few recent sensor commits, not sure
why exactly yet. But here is the working branch with all the changes:
https://github.com/jailuthra/linux/commits/b4/csi_single
Let us know if you face any other issues during your tests.
> >
> > Changes in v7:
> > - For patch 10/13 ("Add CSI2RX upport for J721E"):
> > - Fix incorrect value written in SHIM_PSI_CFG0_DST_TAG
> > - Drop support for 2X8 formats.
> > - Update maintainer to Vaishnav as Pratyush moved out of TI.
> > - Address Sakari's review comments:
> > - Update MAX_HEIGHT_LINES, MAX_WIDTH_BYTES to prevent overflow.
> > - Assign dma_slave_config during declaration, drop memset().
> > - dma_release_channel() on slave_config failure.
> > - provide entity ops for the vdev entity with link_validate().
> > - mutex_destroy() on ti_csi2rx_probe failure path.
> > - Drop busy check in remove().
> > - mutex_destroy() in ti_csi2rx_remove().
> > - Address Laurent's review comments:
> > - Update entries in Makefile in alphabetical order.
> > - include headers in alphabetical order.
> > - Drop redundant CSI DT defines and use from media/mipi-csi2.h.
> > - Rename csi_df to csi_dt.
> > - Drop v4l2_colorspace from ti_csi2rx_fmt and set default in
> > ? ti_csi2rx_v4l2_init()
> > - Adjust field and not return EINVAL in ti_csi2rx_try_fmt_vid_cap().
> > - inline ti_csi2rx_video_register().
> > - start DMA before starting source subdev.
> > - move buffer cleanup to separate function
> > ti_csi2rx_cleanup_buffers()
> > ? to be used in ti_csi2rx_stop_streaming() and
> > ti_csi2rx_start_streaming()
> > ? failure path.
> > - Drop VB2_USERPTR, VB2_READ and V4L2_CAP_READWRITE.
> > - For patch 4/13 ("media: cadence: csi2rx: Add external DPHY
> > support"):
> > - Fix multiplier and divider in v4l2_get_link_freq() which caused
> > ? failures during streaming.
> >
> > Changes in v6:
> > - Move the lock around the dereference for framefmt in
> > ? csi2rx_{get,set}_fmt() instead of when we get the pointer.
> > - Do not return an error when an unsupported format is set. Instead
> > ? adjust the code to the first format in the list.
> > - Drop variable bpp and use fmt->bpp directly.
> > - Drop variable got_pm. Call phy_pm_runtime_put() unconditionally
> > since
> > ? it will just return an error if runtime PM is not enabled.
> > - Drop transcoding from the commit message.
> > - Make csi2rx_media_ops const.
> >
> > Changes in v5:
> > - Cleanup notifier in csi2rx_parse_dt() after the call to
> > ? v4l2_async_nf_add_fwnode_remote().
> > - Use YUV 1X16 formats instead of 2X8.
> > - Only error out when phy_pm_runtime_get_sync() returns a negative
> > ? value. A positive value can be returned if the phy was already
> > ? resumed.
> > - Do not query the source subdev for format. Use the newly added
> > ? internal format instead.
> > - Make i unsigned.
> > - Change %d to %u
> > - Add dependency on PHY_CADENCE_DPHY_RX instead of PHY_CADENCE_DPHY
> > ? since the Rx mode DPHY now has a separate driver.
> > - Drop ti_csi2rx_validate_pipeline(). Pipeline validation should be
> > done
> > ? at media_pipeline_start().
> > - Do not assign flags.
> > - Fix error handling in ti_csi2rx_start_streaming(). Free up vb2
> > buffers
> > ? when media_pipeline_start() fails.
> > - Move clock description in comments under the clocks property.
> > - Make ports required.
> > - Add link validation to cdns-csi2rx driver.
> >
> > Changes in v4:
> > - Drop the call to set PHY submode. It is now being done via
> > compatible
> > ? on the DPHY side.
> > - Acquire the media device's graph_mutex before starting the graph
> > walk.
> > - Call media_graph_walk_init() and media_graph_walk_cleanup() when
> > ? starting and ending the graph walk respectively.
> > - Reduce max frame height and width in enum_framesizes. Currently
> > they
> > ? are set to UINT_MAX but they must be a multiple of step_width, so
> > they
> > ? need to be rounded down. Also, these values are absurdly large
> > which
> > ? causes some userspace applications like gstreamer to trip up. While
> > it
> > ? is not generally right to change the kernel for an application bug,
> > it
> > ? is not such a big deal here. This change is replacing one set of
> > ? absurdly large arbitrary values with another set of smaller but
> > still
> > ? absurdly large arbitrary values. Both limits are unlikely to be hit
> > in
> > ? practice.
> > - Add power-domains property.
> > - Drop maxItems from clock-names.
> > - Drop the type for data-lanes.
> > - Drop uniqueItems from data-lanes. Move it to video-interfaces.yaml
> > ? instead.
> > - Drop OV5640 runtime pm patch. It seems to be a bit complicated and
> > it
> > ? is not exactly necessary for this series. Any CSI-2 camera will
> > work
> > ? just fine, OV5640 just happens to be the one I tested with. I don't
> > ? want it to block this series. I will submit it as a separate patch
> > ? later.
> >
> > Changes in v3:
> > - Use v4l2_get_link_freq() to calculate pixel clock.
> > - Move DMA related fields in struct ti_csi2rx_dma.
> > - Protect DMA buffer queue with a spinlock to make sure the queue
> > buffer
> > ? and DMA callback don't race on it.
> > - Track the current DMA state. It might go idle because of a lack of
> > ? buffers. This state can be used to restart it if needed.
> > - Do not include the current buffer in the pending queue. It is
> > slightly
> > ? better modelling than leaving it at the head of the pending queue.
> > - Use the buffer as the callback argument, and add a reference to csi
> > in it.
> > - If queueing a buffer to DMA fails, the buffer gets leaked and DMA
> > gets
> > ? stalled with. Instead, report the error to vb2 and queue the next
> > ? buffer in the pending queue.
> > - DMA gets stalled if we run out of buffers since the callback is the
> > ? only one that fires subsequent transfers and it is no longer being
> > ? called. Check for that when queueing buffers and restart DMA if
> > ? needed.
> > - Do not put of node until we are done using the fwnode.
> > - Set inital format to UYVY 640x480.
> > - Add compatible: contains: const: cdns,csi2rx to allow SoC specific
> > ? compatible.
> > - Add more constraints for data-lanes property.
> >
> > Changes in v2:
> > - Use phy_pm_runtime_get_sync() and phy_pm_runtime_put() before
> > making
> > ? calls to set PHY mode, etc. to make sure it is ready.
> > - Use dmaengine_get_dma_device() instead of directly accessing
> > ? dma->device->dev.
> > - Do not set dst_addr_width when configuring slave DMA.
> > - Move to a separate subdir and rename to j721e-csi2rx.c
> > - Convert compatible to ti,j721e-csi2rx.
> > - Move to use Media Controller centric APIs.
> > - Improve cleanup in probe when one of the steps fails.
> > - Add colorspace to formats database.
> > - Set hw_revision on media_device.
> > - Move video device initialization to probe time instead of register
> > time.
> > - Rename to ti,j721e-csi2rx.yaml
> > - Add an entry in MAINTAINERS.
> > - Add a description for the binding.
> > - Change compatible to ti,j721e-csi2rx to make it SoC specific.
> > - Remove description from dmas, reg, power-domains.
> > - Remove a limit of 2 from #address-cells and #size-cells.
> > - Fix add ^ to csi-bridge subnode regex.
> > - Make ranges mandatory.
> > - Add unit address in example.
> > - Add a reference to cdns,csi2rx in csi-bridge subnode.
> > - Expand the example to include the csi-bridge subnode as well.
> > - Re-order subject prefixes.
> > - Convert OV5640 to use runtime PM and drop Cadence CSI2RX s_power
> > patch.
> > - Drop subdev call wrappers from cdns-csi2rx.
> > - Move VPE and CAL to a separate subdir.
> > - Rename ti-csi2rx.c to j721e-csi2rx.c
> >
> > Pratyush Yadav (13):
> > ? media: cadence: csi2rx: Unregister v4l2 async notifier
> > ? media: cadence: csi2rx: Cleanup media entity properly
> > ? media: cadence: csi2rx: Add get_fmt and set_fmt pad ops
> > ? media: cadence: csi2rx: Add external DPHY support
> > ? media: cadence: csi2rx: Soft reset the streams before starting
> > capture
> > ? media: cadence: csi2rx: Set the STOP bit when stopping a stream
> > ? media: cadence: csi2rx: Fix stream data configuration
> > ? media: cadence: csi2rx: Populate subdev devnode
> > ? media: cadence: csi2rx: Add link validation
> > ? media: ti: Add CSI2RX support for J721E
> > ? media: dt-bindings: Make sure items in data-lanes are unique
> > ? media: dt-bindings: Add DT bindings for TI J721E CSI2RX driver
> > ? media: dt-bindings: Convert Cadence CSI2RX binding to YAML
> >
> > ?.../devicetree/bindings/media/cdns,csi2rx.txt |? 100 --
> > ?.../bindings/media/cdns,csi2rx.yaml?????????? |? 176 +++
> > ?.../bindings/media/ti,j721e-csi2rx.yaml?????? |? 101 ++
> > ?.../bindings/media/video-interfaces.yaml????? |??? 1 +
> > ?MAINTAINERS?????????????????????????????????? |??? 7 +
> > ?drivers/media/platform/cadence/cdns-csi2rx.c? |? 273 ++++-
> > ?drivers/media/platform/ti/Kconfig???????????? |?? 12 +
> > ?drivers/media/platform/ti/Makefile??????????? |??? 1 +
> > ?.../media/platform/ti/j721e-csi2rx/Makefile?? |??? 2 +
> > ?.../platform/ti/j721e-csi2rx/j721e-csi2rx.c?? | 1022
> > +++++++++++++++++
> > ?10 files changed, 1580 insertions(+), 115 deletions(-)
> > ?delete mode 100644
> > Documentation/devicetree/bindings/media/cdns,csi2rx.txt
> > ?create mode 100644
> > Documentation/devicetree/bindings/media/cdns,csi2rx.yaml
> > ?create mode 100644 Documentation/devicetree/bindings/media/ti,j721e-
> > csi2rx.yaml
> > ?create mode 100644 drivers/media/platform/ti/j721e-csi2rx/Makefile
> > ?create mode 100644 drivers/media/platform/ti/j721e-csi2rx/j721e-
> > csi2rx.c
> >
>
Thanks,
Jai
On Tue, 2023-03-28 at 11:31 +0530, Jai Luthra wrote:
> Hi Martyn,
>
> Thanks for the tests.
>
> On Mar 23, 2023 at 19:36:18 +0000, Martyn Welch wrote:
> > On Tue, 2023-03-14 at 17:25 +0530, Vaishnav Achath wrote:
> > > Hi,
> > >
> > > This series adds support for CSI2 capture on J721E. It includes
> > > some
> > > fixes to the Cadence CSI2RX driver, and adds the TI CSI2RX
> > > wrapper
> > > driver.
> > >
> > > This is a V7 of the below V6 series,
> > > https://lore.kernel.org/all/[email protected]/
> > >
> > > Since Pratyush moved out of TI, I will be working on upstreaming
> > > the
> > > TI CSI2RX wrapper support.
> > >
> > > Tested on TI's J721E EVM with LI OV5640 sensor module.
> > > https://gist.github.com/vaishnavachath/f030a257d5b6569817bc9deab1c4fa77
> > >
> > > Also, Tested on TI AM62-SK with Pcam5C OV5640 module.
> > > https://gist.github.com/vaishnavachath/ff2605faa92f1a6ab5670426da28ccee
> > >
> >
> > Hi Vaishnav,
> >
> > I assume I'm doing something wrong. I have a TI AM62-SK and the
> > Pcam5C
> > OV5640 module. I've been trying to test this with gstreamer using
> > the
> > following command:
> >
> > gst-launch-1.0 -v v4l2src device=/dev/video0 num-buffers=10 !
> > video/x-
> > raw, width=640, height=480, format=UYVY, framerate=30/1 ! jpegenc !
> > multifilesink location=test%d.jpg
> >
> > However I've not been able to get this working, failing with this
> > failure unless I patch in some changes I found in the TI BSP:
> >
> > [ 28.083635] cdns-mipi-dphy-rx 30110000.phy: DPHY wait for lane
> > ready
> > timeout
> > [ 28.090905] cdns-csi2rx 30101000.csi-bridge: Failed to configure
> > external DPHY: -110
>
> That is expected as currently the DPHY driver does not release the SW
> reset which all SoCs since J721E SR1.0 expect. See the patch linked
> by
> Vaishnav below.
>
Ah! Sorry - somehow missed that...
Yep, with those changes it's working for me, thanks!
Tested-by: Martyn Welch <[email protected]>
> >
> > The changes (and the device tree nodes I added, which might be
> > wrong...) can be found here:
> >
> > https://gitlab.collabora.com/martyn/linux/-/commits/am625-sk-ov5640
> >
> > Any ideas what I'm doing wrong?
> >
> > Martyn
> >
> > > For all newer TI platforms that TI J721E Silicon Revision 1.0,
> > > below
> > > update
> > > to DPHY RX driver is needed:
> > > https://lore.kernel.org/all/[email protected]/
>
> ^
>
> With that patch and this series on top of linux-next, I was able to
> get
> Pcam5C capturing with SK-AM62. Although I did face issues with the
> sensor framerate and had to revert a few recent sensor commits, not
> sure
> why exactly yet. But here is the working branch with all the changes:
> https://github.com/jailuthra/linux/commits/b4/csi_single
>
> Let us know if you face any other issues during your tests.
>
> > >
> > > Changes in v7:
> > > - For patch 10/13 ("Add CSI2RX upport for J721E"):
> > > - Fix incorrect value written in SHIM_PSI_CFG0_DST_TAG
> > > - Drop support for 2X8 formats.
> > > - Update maintainer to Vaishnav as Pratyush moved out of TI.
> > > - Address Sakari's review comments:
> > > - Update MAX_HEIGHT_LINES, MAX_WIDTH_BYTES to prevent overflow.
> > > - Assign dma_slave_config during declaration, drop memset().
> > > - dma_release_channel() on slave_config failure.
> > > - provide entity ops for the vdev entity with link_validate().
> > > - mutex_destroy() on ti_csi2rx_probe failure path.
> > > - Drop busy check in remove().
> > > - mutex_destroy() in ti_csi2rx_remove().
> > > - Address Laurent's review comments:
> > > - Update entries in Makefile in alphabetical order.
> > > - include headers in alphabetical order.
> > > - Drop redundant CSI DT defines and use from media/mipi-csi2.h.
> > > - Rename csi_df to csi_dt.
> > > - Drop v4l2_colorspace from ti_csi2rx_fmt and set default in
> > > ti_csi2rx_v4l2_init()
> > > - Adjust field and not return EINVAL in
> > > ti_csi2rx_try_fmt_vid_cap().
> > > - inline ti_csi2rx_video_register().
> > > - start DMA before starting source subdev.
> > > - move buffer cleanup to separate function
> > > ti_csi2rx_cleanup_buffers()
> > > to be used in ti_csi2rx_stop_streaming() and
> > > ti_csi2rx_start_streaming()
> > > failure path.
> > > - Drop VB2_USERPTR, VB2_READ and V4L2_CAP_READWRITE.
> > > - For patch 4/13 ("media: cadence: csi2rx: Add external DPHY
> > > support"):
> > > - Fix multiplier and divider in v4l2_get_link_freq() which caused
> > > failures during streaming.
> > >
> > > Changes in v6:
> > > - Move the lock around the dereference for framefmt in
> > > csi2rx_{get,set}_fmt() instead of when we get the pointer.
> > > - Do not return an error when an unsupported format is set.
> > > Instead
> > > adjust the code to the first format in the list.
> > > - Drop variable bpp and use fmt->bpp directly.
> > > - Drop variable got_pm. Call phy_pm_runtime_put() unconditionally
> > > since
> > > it will just return an error if runtime PM is not enabled.
> > > - Drop transcoding from the commit message.
> > > - Make csi2rx_media_ops const.
> > >
> > > Changes in v5:
> > > - Cleanup notifier in csi2rx_parse_dt() after the call to
> > > v4l2_async_nf_add_fwnode_remote().
> > > - Use YUV 1X16 formats instead of 2X8.
> > > - Only error out when phy_pm_runtime_get_sync() returns a
> > > negative
> > > value. A positive value can be returned if the phy was already
> > > resumed.
> > > - Do not query the source subdev for format. Use the newly added
> > > internal format instead.
> > > - Make i unsigned.
> > > - Change %d to %u
> > > - Add dependency on PHY_CADENCE_DPHY_RX instead of
> > > PHY_CADENCE_DPHY
> > > since the Rx mode DPHY now has a separate driver.
> > > - Drop ti_csi2rx_validate_pipeline(). Pipeline validation should
> > > be
> > > done
> > > at media_pipeline_start().
> > > - Do not assign flags.
> > > - Fix error handling in ti_csi2rx_start_streaming(). Free up vb2
> > > buffers
> > > when media_pipeline_start() fails.
> > > - Move clock description in comments under the clocks property.
> > > - Make ports required.
> > > - Add link validation to cdns-csi2rx driver.
> > >
> > > Changes in v4:
> > > - Drop the call to set PHY submode. It is now being done via
> > > compatible
> > > on the DPHY side.
> > > - Acquire the media device's graph_mutex before starting the
> > > graph
> > > walk.
> > > - Call media_graph_walk_init() and media_graph_walk_cleanup()
> > > when
> > > starting and ending the graph walk respectively.
> > > - Reduce max frame height and width in enum_framesizes. Currently
> > > they
> > > are set to UINT_MAX but they must be a multiple of step_width,
> > > so
> > > they
> > > need to be rounded down. Also, these values are absurdly large
> > > which
> > > causes some userspace applications like gstreamer to trip up.
> > > While
> > > it
> > > is not generally right to change the kernel for an application
> > > bug,
> > > it
> > > is not such a big deal here. This change is replacing one set
> > > of
> > > absurdly large arbitrary values with another set of smaller but
> > > still
> > > absurdly large arbitrary values. Both limits are unlikely to be
> > > hit
> > > in
> > > practice.
> > > - Add power-domains property.
> > > - Drop maxItems from clock-names.
> > > - Drop the type for data-lanes.
> > > - Drop uniqueItems from data-lanes. Move it to video-
> > > interfaces.yaml
> > > instead.
> > > - Drop OV5640 runtime pm patch. It seems to be a bit complicated
> > > and
> > > it
> > > is not exactly necessary for this series. Any CSI-2 camera will
> > > work
> > > just fine, OV5640 just happens to be the one I tested with. I
> > > don't
> > > want it to block this series. I will submit it as a separate
> > > patch
> > > later.
> > >
> > > Changes in v3:
> > > - Use v4l2_get_link_freq() to calculate pixel clock.
> > > - Move DMA related fields in struct ti_csi2rx_dma.
> > > - Protect DMA buffer queue with a spinlock to make sure the queue
> > > buffer
> > > and DMA callback don't race on it.
> > > - Track the current DMA state. It might go idle because of a lack
> > > of
> > > buffers. This state can be used to restart it if needed.
> > > - Do not include the current buffer in the pending queue. It is
> > > slightly
> > > better modelling than leaving it at the head of the pending
> > > queue.
> > > - Use the buffer as the callback argument, and add a reference to
> > > csi
> > > in it.
> > > - If queueing a buffer to DMA fails, the buffer gets leaked and
> > > DMA
> > > gets
> > > stalled with. Instead, report the error to vb2 and queue the
> > > next
> > > buffer in the pending queue.
> > > - DMA gets stalled if we run out of buffers since the callback is
> > > the
> > > only one that fires subsequent transfers and it is no longer
> > > being
> > > called. Check for that when queueing buffers and restart DMA if
> > > needed.
> > > - Do not put of node until we are done using the fwnode.
> > > - Set inital format to UYVY 640x480.
> > > - Add compatible: contains: const: cdns,csi2rx to allow SoC
> > > specific
> > > compatible.
> > > - Add more constraints for data-lanes property.
> > >
> > > Changes in v2:
> > > - Use phy_pm_runtime_get_sync() and phy_pm_runtime_put() before
> > > making
> > > calls to set PHY mode, etc. to make sure it is ready.
> > > - Use dmaengine_get_dma_device() instead of directly accessing
> > > dma->device->dev.
> > > - Do not set dst_addr_width when configuring slave DMA.
> > > - Move to a separate subdir and rename to j721e-csi2rx.c
> > > - Convert compatible to ti,j721e-csi2rx.
> > > - Move to use Media Controller centric APIs.
> > > - Improve cleanup in probe when one of the steps fails.
> > > - Add colorspace to formats database.
> > > - Set hw_revision on media_device.
> > > - Move video device initialization to probe time instead of
> > > register
> > > time.
> > > - Rename to ti,j721e-csi2rx.yaml
> > > - Add an entry in MAINTAINERS.
> > > - Add a description for the binding.
> > > - Change compatible to ti,j721e-csi2rx to make it SoC specific.
> > > - Remove description from dmas, reg, power-domains.
> > > - Remove a limit of 2 from #address-cells and #size-cells.
> > > - Fix add ^ to csi-bridge subnode regex.
> > > - Make ranges mandatory.
> > > - Add unit address in example.
> > > - Add a reference to cdns,csi2rx in csi-bridge subnode.
> > > - Expand the example to include the csi-bridge subnode as well.
> > > - Re-order subject prefixes.
> > > - Convert OV5640 to use runtime PM and drop Cadence CSI2RX
> > > s_power
> > > patch.
> > > - Drop subdev call wrappers from cdns-csi2rx.
> > > - Move VPE and CAL to a separate subdir.
> > > - Rename ti-csi2rx.c to j721e-csi2rx.c
> > >
> > > Pratyush Yadav (13):
> > > media: cadence: csi2rx: Unregister v4l2 async notifier
> > > media: cadence: csi2rx: Cleanup media entity properly
> > > media: cadence: csi2rx: Add get_fmt and set_fmt pad ops
> > > media: cadence: csi2rx: Add external DPHY support
> > > media: cadence: csi2rx: Soft reset the streams before starting
> > > capture
> > > media: cadence: csi2rx: Set the STOP bit when stopping a stream
> > > media: cadence: csi2rx: Fix stream data configuration
> > > media: cadence: csi2rx: Populate subdev devnode
> > > media: cadence: csi2rx: Add link validation
> > > media: ti: Add CSI2RX support for J721E
> > > media: dt-bindings: Make sure items in data-lanes are unique
> > > media: dt-bindings: Add DT bindings for TI J721E CSI2RX driver
> > > media: dt-bindings: Convert Cadence CSI2RX binding to YAML
> > >
> > > .../devicetree/bindings/media/cdns,csi2rx.txt | 100 --
> > > .../bindings/media/cdns,csi2rx.yaml | 176 +++
> > > .../bindings/media/ti,j721e-csi2rx.yaml | 101 ++
> > > .../bindings/media/video-interfaces.yaml | 1 +
> > > MAINTAINERS | 7 +
> > > drivers/media/platform/cadence/cdns-csi2rx.c | 273 ++++-
> > > drivers/media/platform/ti/Kconfig | 12 +
> > > drivers/media/platform/ti/Makefile | 1 +
> > > .../media/platform/ti/j721e-csi2rx/Makefile | 2 +
> > > .../platform/ti/j721e-csi2rx/j721e-csi2rx.c | 1022
> > > +++++++++++++++++
> > > 10 files changed, 1580 insertions(+), 115 deletions(-)
> > > delete mode 100644
> > > Documentation/devicetree/bindings/media/cdns,csi2rx.txt
> > > create mode 100644
> > > Documentation/devicetree/bindings/media/cdns,csi2rx.yaml
> > > create mode 100644
> > > Documentation/devicetree/bindings/media/ti,j721e-
> > > csi2rx.yaml
> > > create mode 100644 drivers/media/platform/ti/j721e-
> > > csi2rx/Makefile
> > > create mode 100644 drivers/media/platform/ti/j721e-csi2rx/j721e-
> > > csi2rx.c
> > >
> >
>
> Thanks,
> Jai
On 14/03/2023 13:55, Vaishnav Achath wrote:
> Hi,
>
> This series adds support for CSI2 capture on J721E. It includes some
> fixes to the Cadence CSI2RX driver, and adds the TI CSI2RX wrapper driver.
I get some errors with 'v4l2-compliance -m /dev/media0', which also causes:
[ 51.185172] ------------[ cut here ]------------
[ 51.189786] WARNING: CPU: 1 PID: 174 at mm/page_alloc.c:5568 __alloc_pages+0x684/0xd24
[ 51.197698] Modules linked in:
[ 51.200743] CPU: 1 PID: 174 Comm: v4l2-compliance Not tainted 6.3.0-rc5+ #12
[ 51.207772] Hardware name: Texas Instruments J721e EVM (DT)
[ 51.213326] pstate: 20000005 (nzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 51.220269] pc : __alloc_pages+0x684/0xd24
[ 51.224353] lr : __dma_direct_alloc_pages.constprop.0+0x1d4/0x2a0
[ 51.230431] sp : ffff800009fd37b0
[ 51.233732] x29: ffff800009fd37b0 x28: ffff000801ad18e0 x27: 0000000000000001
[ 51.240852] x26: 0000000000000010 x25: ffff800009fd3b18 x24: ffff800008112c60
[ 51.247971] x23: 0000000000000010 x22: 00000000ffffffff x21: 0000000000000cc0
[ 51.255089] x20: 0000000010000000 x19: 0000000000000000 x18: 0000000000000000
[ 51.262208] x17: 0000000000000000 x16: 0000000000000000 x15: 00000000fff7a238
[ 51.269326] x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000
[ 51.276444] x11: 0000000000000000 x10: 0000000000000000 x9 : 0000000000000000
[ 51.283562] x8 : ffff000802c4a200 x7 : 0000000000000000 x6 : 0000000000000000
[ 51.290680] x5 : 0000000000000000 x4 : ffff0008022a0000 x3 : 0000000000000000
[ 51.297798] x2 : 0000000000000000 x1 : 0000000000000001 x0 : ffff80000937a000
[ 51.304916] Call trace:
[ 51.307350] __alloc_pages+0x684/0xd24
[ 51.311086] __dma_direct_alloc_pages.constprop.0+0x1d4/0x2a0
[ 51.316814] dma_direct_alloc+0x210/0x33c
[ 51.320809] dma_alloc_attrs+0x80/0xf4
[ 51.324548] vb2_dc_alloc+0xa0/0x184
[ 51.328114] __vb2_queue_alloc+0x19c/0x490
[ 51.332197] vb2_core_reqbufs+0x250/0x45c
[ 51.336192] vb2_ioctl_reqbufs+0xb0/0xe8
[ 51.340103] v4l_reqbufs+0x50/0x64
[ 51.343494] __video_do_ioctl+0x18c/0x3ec
[ 51.347489] video_usercopy+0x214/0x6c4
[ 51.351312] video_ioctl2+0x18/0x24
[ 51.354788] v4l2_ioctl+0x40/0x60
[ 51.358088] v4l2_compat_ioctl32+0x90/0xb4
[ 51.362171] __arm64_compat_sys_ioctl+0x14c/0x170
[ 51.366860] invoke_syscall+0x48/0x114
[ 51.370599] el0_svc_common.constprop.0+0x44/0xf4
[ 51.375288] do_el0_svc_compat+0x20/0x44
[ 51.379198] el0_svc_compat+0x2c/0x84
[ 51.382848] el0t_32_sync_handler+0x98/0x148
[ 51.387102] el0t_32_sync+0x194/0x198
[ 51.390752] ---[ end trace 0000000000000000 ]---
[ 51.395408] ti-udma 31150000.dma-controller: dma alloc of size 268435456 failed
Tomi
Hi Vaishnav,
On 14/03/2023 13:55, Vaishnav Achath wrote:
> Hi,
>
> This series adds support for CSI2 capture on J721E. It includes some
> fixes to the Cadence CSI2RX driver, and adds the TI CSI2RX wrapper
> driver.
We are testing this patch series and experienced some strange behaviour,
with the same sequence of 5-10 frames repeated over and over.
(Almost the same sequence since frames have different md5sum)
To solve this issue we had to forward port some functions from the TI
BSP Kernel[1] such as ti_csi2rx_restart_dma, and ti_csi2rx_drain_dma.
Can you consider this issue for the next patchset version?
Thank you,
Julien
Here are the modifications we made for information only.
---
.../platform/ti/j721e-csi2rx/j721e-csi2rx.c | 138 +++++++++++++++---
1 file changed, 117 insertions(+), 21 deletions(-)
diff --git a/drivers/media/platform/ti/j721e-csi2rx/j721e-csi2rx.c
b/drivers/media/platform/ti/j721e-csi2rx/j721e-csi2rx.c
index 1af7b0b09cfc..e8579dbf07b4 100644
--- a/drivers/media/platform/ti/j721e-csi2rx/j721e-csi2rx.c
+++ b/drivers/media/platform/ti/j721e-csi2rx/j721e-csi2rx.c
@@ -46,6 +46,8 @@
#define MAX_WIDTH_BYTES SZ_16K
#define MAX_HEIGHT_LINES SZ_16K
+#define DRAIN_TIMEOUT_MS 50
+
struct ti_csi2rx_fmt {
u32 fourcc; /* Four character code. */
u32 code; /* Mbus code. */
@@ -498,6 +500,59 @@ static void ti_csi2rx_setup_shim(struct
ti_csi2rx_dev *csi)
writel(reg, csi->shim + SHIM_PSI_CFG0);
}
+static void ti_csi2rx_drain_callback(void *param)
+{
+ struct completion *drain_complete = param;
+
+ complete(drain_complete);
+}
+
+static int ti_csi2rx_drain_dma(struct ti_csi2rx_dev *csi)
+{
+ struct dma_async_tx_descriptor *desc;
+ struct device *dev = csi->dma.chan->device->dev;
+ struct completion drain_complete;
+ void *buf;
+ size_t len = csi->v_fmt.fmt.pix.sizeimage;
+ dma_addr_t addr;
+ dma_cookie_t cookie;
+ int ret;
+
+ init_completion(&drain_complete);
+
+ buf = dma_alloc_coherent(dev, len, &addr, GFP_KERNEL | GFP_ATOMIC);
+ if (!buf)
+ return -ENOMEM;
+
+ desc = dmaengine_prep_slave_single(csi->dma.chan, addr, len,
+ DMA_DEV_TO_MEM,
+ DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
+ if (!desc) {
+ ret = -EIO;
+ goto out;
+ }
+
+ desc->callback = ti_csi2rx_drain_callback;
+ desc->callback_param = &drain_complete;
+
+ cookie = dmaengine_submit(desc);
+ ret = dma_submit_error(cookie);
+ if (ret)
+ goto out;
+
+ dma_async_issue_pending(csi->dma.chan);
+
+ if (!wait_for_completion_timeout(&drain_complete,
+ msecs_to_jiffies(DRAIN_TIMEOUT_MS))) {
+ dmaengine_terminate_sync(csi->dma.chan);
+ ret = -ETIMEDOUT;
+ goto out;
+ }
+out:
+ dma_free_coherent(dev, len, buf, addr);
+ return ret;
+}
+
static void ti_csi2rx_dma_callback(void *param)
{
struct ti_csi2rx_buffer *buf = param;
@@ -564,24 +619,61 @@ static int ti_csi2rx_start_dma(struct
ti_csi2rx_dev *csi,
}
static void ti_csi2rx_cleanup_buffers(struct ti_csi2rx_dev *csi,
- enum vb2_buffer_state state)
+ enum vb2_buffer_state buf_state)
{
struct ti_csi2rx_dma *dma = &csi->dma;
- struct ti_csi2rx_buffer *buf = NULL, *tmp;
+ struct ti_csi2rx_buffer *buf = NULL, *tmp, *curr;;
+ enum ti_csi2rx_dma_state state;
unsigned long flags;
+ int ret;
spin_lock_irqsave(&dma->lock, flags);
list_for_each_entry_safe(buf, tmp, &csi->dma.queue, list) {
list_del(&buf->list);
- vb2_buffer_done(&buf->vb.vb2_buf, state);
+ vb2_buffer_done(&buf->vb.vb2_buf, buf_state);
}
- if (dma->curr)
- vb2_buffer_done(&dma->curr->vb.vb2_buf, state);
-
+ curr = csi->dma.curr;
+ state = csi->dma.state;
dma->curr = NULL;
dma->state = TI_CSI2RX_DMA_STOPPED;
spin_unlock_irqrestore(&dma->lock, flags);
+
+ if (state != TI_CSI2RX_DMA_STOPPED) {
+ ret = ti_csi2rx_drain_dma(csi);
+ if (ret)
+ dev_dbg(csi->dev,
+ "Failed to drain DMA. Next frame might be bogus\n");
+ dmaengine_terminate_sync(csi->dma.chan);
+ }
+
+ if (curr)
+ vb2_buffer_done(&curr->vb.vb2_buf, buf_state);
+}
+
+static int ti_csi2rx_restart_dma(struct ti_csi2rx_dev *csi,
+ struct ti_csi2rx_buffer *buf)
+{
+ struct ti_csi2rx_dma *dma = &csi->dma;
+ unsigned long flags = 0;
+ int ret = 0;
+
+ ret = ti_csi2rx_drain_dma(csi);
+ if (ret)
+ dev_warn(csi->dev,
+ "Failed to drain DMA. Next frame might be bogus\n");
+
+ ret = ti_csi2rx_start_dma(csi, buf);
+ if (ret) {
+ dev_err(csi->dev, "Failed to start DMA: %d\n", ret);
+ spin_lock_irqsave(&dma->lock, flags);
+ vb2_buffer_done(&buf->vb.vb2_buf, VB2_BUF_STATE_ERROR);
+ dma->curr = NULL;
+ dma->state = TI_CSI2RX_DMA_IDLE;
+ spin_unlock_irqrestore(&dma->lock, flags);
+ }
+
+ return ret;
}
static int ti_csi2rx_queue_setup(struct vb2_queue *q, unsigned int
*nbuffers,
@@ -622,6 +714,7 @@ static void ti_csi2rx_buffer_queue(struct vb2_buffer
*vb)
struct ti_csi2rx_dev *csi = vb2_get_drv_priv(vb->vb2_queue);
struct ti_csi2rx_buffer *buf;
struct ti_csi2rx_dma *dma = &csi->dma;
+ bool restart_dma = false;
unsigned long flags = 0;
int ret;
@@ -634,21 +727,30 @@ static void ti_csi2rx_buffer_queue(struct
vb2_buffer *vb)
* But if DMA has stalled due to lack of buffers, restart it now.
*/
if (dma->state == TI_CSI2RX_DMA_IDLE) {
- ret = ti_csi2rx_start_dma(csi, buf);
- if (ret) {
- dev_err(csi->dev, "Failed to start DMA: %d\n", ret);
- vb2_buffer_done(&buf->vb.vb2_buf, VB2_BUF_STATE_QUEUED);
- goto unlock;
- }
-
+ /*
+ * Do not restart DMA with the lock held because
+ * ti_csi2rx_drain_dma() might block when allocating a buffer.
+ * There won't be a race on queueing DMA anyway since the
+ * callback is not being fired.
+ */
+ restart_dma = true;
dma->curr = buf;
dma->state = TI_CSI2RX_DMA_ACTIVE;
} else {
list_add_tail(&buf->list, &dma->queue);
}
-
-unlock:
spin_unlock_irqrestore(&dma->lock, flags);
+
+ if (restart_dma) {
+ /*
+ * Once frames start dropping, some data gets stuck in the DMA
+ * pipeline somewhere. So the first DMA transfer after frame
+ * drops gives a partial frame. This is obviously not useful to
+ * the application and will only confuse it. Issue a DMA
+ * transaction to drain that up.
+ */
+ ti_csi2rx_restart_dma(csi, buf);
+ }
}
static int ti_csi2rx_start_streaming(struct vb2_queue *vq, unsigned
int count)
@@ -718,12 +820,6 @@ static void ti_csi2rx_stop_streaming(struct
vb2_queue *vq)
writel(0, csi->shim + SHIM_CNTL);
- ret = dmaengine_terminate_sync(csi->dma.chan);
- if (ret)
- dev_err(csi->dev, "Failed to stop DMA: %d\n", ret);
-
- writel(0, csi->shim + SHIM_DMACNTX);
-
ti_csi2rx_cleanup_buffers(csi, VB2_BUF_STATE_ERROR);
}
--
2.41.0
[1] TI BSP kernel :
https://git.ti.com/cgit/ti-linux-kernel/ti-linux-kernel/tree/drivers/media/platform/ti/j721e-csi2rx/j721e-csi2rx.c?h=ti-linux-6.1.y-cicd
--
Julien Massot
Senior Software Engineer
Collabora Ltd.
Platinum Building, St John's Innovation Park, Cambridge CB4 0DS, UK
Registered in England & Wales, no. 5513718
Hi Julien,
On Jun 22, 2023 at 11:18:28 +0200, Julien Massot wrote:
> Hi Vaishnav,
>
> On 14/03/2023 13:55, Vaishnav Achath wrote:
> > Hi,
> >
> > This series adds support for CSI2 capture on J721E. It includes some
> > fixes to the Cadence CSI2RX driver, and adds the TI CSI2RX wrapper
> > driver.
> We are testing this patch series and experienced some strange behaviour,
> with the same sequence of 5-10 frames repeated over and over.
> (Almost the same sequence since frames have different md5sum)
>
> To solve this issue we had to forward port some functions from the TI BSP
> Kernel[1] such as ti_csi2rx_restart_dma, and ti_csi2rx_drain_dma.
>
> Can you consider this issue for the next patchset version?
While we haven't seen this particular issue (of repeating frames) due to
a lack of draining, I agree that it is a useful fix.
Will include it in v8 of this series along with some other features and
fixes around stream stop sequence.
Thanks,
>
> Thank you,
> Julien
>
>
> Here are the modifications we made for information only.
>
> ---
> .../platform/ti/j721e-csi2rx/j721e-csi2rx.c | 138 +++++++++++++++---
> 1 file changed, 117 insertions(+), 21 deletions(-)
>
> diff --git a/drivers/media/platform/ti/j721e-csi2rx/j721e-csi2rx.c
> b/drivers/media/platform/ti/j721e-csi2rx/j721e-csi2rx.c
> index 1af7b0b09cfc..e8579dbf07b4 100644
> --- a/drivers/media/platform/ti/j721e-csi2rx/j721e-csi2rx.c
> +++ b/drivers/media/platform/ti/j721e-csi2rx/j721e-csi2rx.c
> @@ -46,6 +46,8 @@
> #define MAX_WIDTH_BYTES SZ_16K
> #define MAX_HEIGHT_LINES SZ_16K
>
> +#define DRAIN_TIMEOUT_MS 50
> +
> struct ti_csi2rx_fmt {
> u32 fourcc; /* Four character code. */
> u32 code; /* Mbus code. */
> @@ -498,6 +500,59 @@ static void ti_csi2rx_setup_shim(struct ti_csi2rx_dev
> *csi)
> writel(reg, csi->shim + SHIM_PSI_CFG0);
> }
>
> +static void ti_csi2rx_drain_callback(void *param)
> +{
> + struct completion *drain_complete = param;
> +
> + complete(drain_complete);
> +}
> +
> +static int ti_csi2rx_drain_dma(struct ti_csi2rx_dev *csi)
> +{
> + struct dma_async_tx_descriptor *desc;
> + struct device *dev = csi->dma.chan->device->dev;
> + struct completion drain_complete;
> + void *buf;
> + size_t len = csi->v_fmt.fmt.pix.sizeimage;
> + dma_addr_t addr;
> + dma_cookie_t cookie;
> + int ret;
> +
> + init_completion(&drain_complete);
> +
> + buf = dma_alloc_coherent(dev, len, &addr, GFP_KERNEL | GFP_ATOMIC);
> + if (!buf)
> + return -ENOMEM;
> +
> + desc = dmaengine_prep_slave_single(csi->dma.chan, addr, len,
> + DMA_DEV_TO_MEM,
> + DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
> + if (!desc) {
> + ret = -EIO;
> + goto out;
> + }
> +
> + desc->callback = ti_csi2rx_drain_callback;
> + desc->callback_param = &drain_complete;
> +
> + cookie = dmaengine_submit(desc);
> + ret = dma_submit_error(cookie);
> + if (ret)
> + goto out;
> +
> + dma_async_issue_pending(csi->dma.chan);
> +
> + if (!wait_for_completion_timeout(&drain_complete,
> + msecs_to_jiffies(DRAIN_TIMEOUT_MS))) {
> + dmaengine_terminate_sync(csi->dma.chan);
> + ret = -ETIMEDOUT;
> + goto out;
> + }
> +out:
> + dma_free_coherent(dev, len, buf, addr);
> + return ret;
> +}
> +
> static void ti_csi2rx_dma_callback(void *param)
> {
> struct ti_csi2rx_buffer *buf = param;
> @@ -564,24 +619,61 @@ static int ti_csi2rx_start_dma(struct ti_csi2rx_dev
> *csi,
> }
>
> static void ti_csi2rx_cleanup_buffers(struct ti_csi2rx_dev *csi,
> - enum vb2_buffer_state state)
> + enum vb2_buffer_state buf_state)
> {
> struct ti_csi2rx_dma *dma = &csi->dma;
> - struct ti_csi2rx_buffer *buf = NULL, *tmp;
> + struct ti_csi2rx_buffer *buf = NULL, *tmp, *curr;;
> + enum ti_csi2rx_dma_state state;
> unsigned long flags;
> + int ret;
>
> spin_lock_irqsave(&dma->lock, flags);
> list_for_each_entry_safe(buf, tmp, &csi->dma.queue, list) {
> list_del(&buf->list);
> - vb2_buffer_done(&buf->vb.vb2_buf, state);
> + vb2_buffer_done(&buf->vb.vb2_buf, buf_state);
> }
>
> - if (dma->curr)
> - vb2_buffer_done(&dma->curr->vb.vb2_buf, state);
> -
> + curr = csi->dma.curr;
> + state = csi->dma.state;
> dma->curr = NULL;
> dma->state = TI_CSI2RX_DMA_STOPPED;
> spin_unlock_irqrestore(&dma->lock, flags);
> +
> + if (state != TI_CSI2RX_DMA_STOPPED) {
> + ret = ti_csi2rx_drain_dma(csi);
> + if (ret)
> + dev_dbg(csi->dev,
> + "Failed to drain DMA. Next frame might be bogus\n");
> + dmaengine_terminate_sync(csi->dma.chan);
> + }
> +
> + if (curr)
> + vb2_buffer_done(&curr->vb.vb2_buf, buf_state);
> +}
> +
> +static int ti_csi2rx_restart_dma(struct ti_csi2rx_dev *csi,
> + struct ti_csi2rx_buffer *buf)
> +{
> + struct ti_csi2rx_dma *dma = &csi->dma;
> + unsigned long flags = 0;
> + int ret = 0;
> +
> + ret = ti_csi2rx_drain_dma(csi);
> + if (ret)
> + dev_warn(csi->dev,
> + "Failed to drain DMA. Next frame might be bogus\n");
> +
> + ret = ti_csi2rx_start_dma(csi, buf);
> + if (ret) {
> + dev_err(csi->dev, "Failed to start DMA: %d\n", ret);
> + spin_lock_irqsave(&dma->lock, flags);
> + vb2_buffer_done(&buf->vb.vb2_buf, VB2_BUF_STATE_ERROR);
> + dma->curr = NULL;
> + dma->state = TI_CSI2RX_DMA_IDLE;
> + spin_unlock_irqrestore(&dma->lock, flags);
> + }
> +
> + return ret;
> }
>
> static int ti_csi2rx_queue_setup(struct vb2_queue *q, unsigned int
> *nbuffers,
> @@ -622,6 +714,7 @@ static void ti_csi2rx_buffer_queue(struct vb2_buffer
> *vb)
> struct ti_csi2rx_dev *csi = vb2_get_drv_priv(vb->vb2_queue);
> struct ti_csi2rx_buffer *buf;
> struct ti_csi2rx_dma *dma = &csi->dma;
> + bool restart_dma = false;
> unsigned long flags = 0;
> int ret;
>
> @@ -634,21 +727,30 @@ static void ti_csi2rx_buffer_queue(struct vb2_buffer
> *vb)
> * But if DMA has stalled due to lack of buffers, restart it now.
> */
> if (dma->state == TI_CSI2RX_DMA_IDLE) {
> - ret = ti_csi2rx_start_dma(csi, buf);
> - if (ret) {
> - dev_err(csi->dev, "Failed to start DMA: %d\n", ret);
> - vb2_buffer_done(&buf->vb.vb2_buf, VB2_BUF_STATE_QUEUED);
> - goto unlock;
> - }
> -
> + /*
> + * Do not restart DMA with the lock held because
> + * ti_csi2rx_drain_dma() might block when allocating a buffer.
> + * There won't be a race on queueing DMA anyway since the
> + * callback is not being fired.
> + */
> + restart_dma = true;
> dma->curr = buf;
> dma->state = TI_CSI2RX_DMA_ACTIVE;
> } else {
> list_add_tail(&buf->list, &dma->queue);
> }
> -
> -unlock:
> spin_unlock_irqrestore(&dma->lock, flags);
> +
> + if (restart_dma) {
> + /*
> + * Once frames start dropping, some data gets stuck in the DMA
> + * pipeline somewhere. So the first DMA transfer after frame
> + * drops gives a partial frame. This is obviously not useful to
> + * the application and will only confuse it. Issue a DMA
> + * transaction to drain that up.
> + */
> + ti_csi2rx_restart_dma(csi, buf);
> + }
> }
>
> static int ti_csi2rx_start_streaming(struct vb2_queue *vq, unsigned int
> count)
> @@ -718,12 +820,6 @@ static void ti_csi2rx_stop_streaming(struct vb2_queue
> *vq)
>
> writel(0, csi->shim + SHIM_CNTL);
>
> - ret = dmaengine_terminate_sync(csi->dma.chan);
> - if (ret)
> - dev_err(csi->dev, "Failed to stop DMA: %d\n", ret);
> -
> - writel(0, csi->shim + SHIM_DMACNTX);
> -
> ti_csi2rx_cleanup_buffers(csi, VB2_BUF_STATE_ERROR);
> }
>
> --
> 2.41.0
>
>
> [1] TI BSP kernel : https://git.ti.com/cgit/ti-linux-kernel/ti-linux-kernel/tree/drivers/media/platform/ti/j721e-csi2rx/j721e-csi2rx.c?h=ti-linux-6.1.y-cicd
>
> --
> Julien Massot
> Senior Software Engineer
> Collabora Ltd.
> Platinum Building, St John's Innovation Park, Cambridge CB4 0DS, UK
> Registered in England & Wales, no. 5513718
--
Jai
GPG Fingerprint: 4DE0 D818 E5D5 75E8 D45A AFC5 43DE 91F9 249A 7145