From: "Alessandro Carminati (Red Hat)" <[email protected]>
[ Upstream commit f803bcf9208a2540acb4c32bdc3616673169f490 ]
In some systems, the netcat server can incur in delay to start listening.
When this happens, the test can randomly fail in various points.
This is an example error message:
# ip gre none gso
# encap 192.168.1.1 to 192.168.1.2, type gre, mac none len 2000
# test basic connectivity
# Ncat: Connection refused.
The issue stems from a race condition between the netcat client and server.
The test author had addressed this problem by implementing a sleep, which
I have removed in this patch.
This patch introduces a function capable of sleeping for up to two seconds.
However, it can terminate the waiting period early if the port is reported
to be listening.
Signed-off-by: Alessandro Carminati (Red Hat) <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
tools/testing/selftests/bpf/test_tc_tunnel.sh | 13 ++++++++++++-
1 file changed, 12 insertions(+), 1 deletion(-)
diff --git a/tools/testing/selftests/bpf/test_tc_tunnel.sh b/tools/testing/selftests/bpf/test_tc_tunnel.sh
index 088fcad138c98..38c6e9f16f41e 100755
--- a/tools/testing/selftests/bpf/test_tc_tunnel.sh
+++ b/tools/testing/selftests/bpf/test_tc_tunnel.sh
@@ -71,7 +71,6 @@ cleanup() {
server_listen() {
ip netns exec "${ns2}" nc "${netcat_opt}" -l "${port}" > "${outfile}" &
server_pid=$!
- sleep 0.2
}
client_connect() {
@@ -92,6 +91,16 @@ verify_data() {
fi
}
+wait_for_port() {
+ for i in $(seq 20); do
+ if ip netns exec "${ns2}" ss ${2:--4}OHntl | grep -q "$1"; then
+ return 0
+ fi
+ sleep 0.1
+ done
+ return 1
+}
+
set -e
# no arguments: automated test, run all
@@ -189,6 +198,7 @@ setup
# basic communication works
echo "test basic connectivity"
server_listen
+wait_for_port ${port} ${netcat_opt}
client_connect
verify_data
@@ -200,6 +210,7 @@ ip netns exec "${ns1}" tc filter add dev veth1 egress \
section "encap_${tuntype}_${mac}"
echo "test bpf encap without decap (expect failure)"
server_listen
+wait_for_port ${port} ${netcat_opt}
! client_connect
if [[ "$tuntype" =~ "udp" ]]; then
--
2.43.0
From: Yonghong Song <[email protected]>
[ Upstream commit 14bb1e8c8d4ad5d9d2febb7d19c70a3cf536e1e5 ]
Recently, I frequently hit the following test failure:
[root@arch-fb-vm1 bpf]# ./test_progs -n 33/1
test_lookup_update:PASS:skel_open 0 nsec
[...]
test_lookup_update:PASS:sync_rcu 0 nsec
test_lookup_update:FAIL:map1_leak inner_map1 leaked!
#33/1 btf_map_in_map/lookup_update:FAIL
#33 btf_map_in_map:FAIL
In the test, after map is closed and then after two rcu grace periods,
it is assumed that map_id is not available to user space.
But the above assumption cannot be guaranteed. After zero or one
or two rcu grace periods in different siturations, the actual
freeing-map-work is put into a workqueue. Later on, when the work
is dequeued, the map will be actually freed.
See bpf_map_put() in kernel/bpf/syscall.c.
By using workqueue, there is no ganrantee that map will be actually
freed after a couple of rcu grace periods. This patch removed
such map leak detection and then the test can pass consistently.
Signed-off-by: Yonghong Song <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
.../selftests/bpf/prog_tests/btf_map_in_map.c | 26 +------------------
1 file changed, 1 insertion(+), 25 deletions(-)
diff --git a/tools/testing/selftests/bpf/prog_tests/btf_map_in_map.c b/tools/testing/selftests/bpf/prog_tests/btf_map_in_map.c
index eb90a6b8850d2..f4d753185001a 100644
--- a/tools/testing/selftests/bpf/prog_tests/btf_map_in_map.c
+++ b/tools/testing/selftests/bpf/prog_tests/btf_map_in_map.c
@@ -25,7 +25,7 @@ static void test_lookup_update(void)
int map1_fd, map2_fd, map3_fd, map4_fd, map5_fd, map1_id, map2_id;
int outer_arr_fd, outer_hash_fd, outer_arr_dyn_fd;
struct test_btf_map_in_map *skel;
- int err, key = 0, val, i, fd;
+ int err, key = 0, val, i;
skel = test_btf_map_in_map__open_and_load();
if (CHECK(!skel, "skel_open", "failed to open&load skeleton\n"))
@@ -102,30 +102,6 @@ static void test_lookup_update(void)
CHECK(map1_id == 0, "map1_id", "failed to get ID 1\n");
CHECK(map2_id == 0, "map2_id", "failed to get ID 2\n");
- test_btf_map_in_map__destroy(skel);
- skel = NULL;
-
- /* we need to either wait for or force synchronize_rcu(), before
- * checking for "still exists" condition, otherwise map could still be
- * resolvable by ID, causing false positives.
- *
- * Older kernels (5.8 and earlier) freed map only after two
- * synchronize_rcu()s, so trigger two, to be entirely sure.
- */
- CHECK(kern_sync_rcu(), "sync_rcu", "failed\n");
- CHECK(kern_sync_rcu(), "sync_rcu", "failed\n");
-
- fd = bpf_map_get_fd_by_id(map1_id);
- if (CHECK(fd >= 0, "map1_leak", "inner_map1 leaked!\n")) {
- close(fd);
- goto cleanup;
- }
- fd = bpf_map_get_fd_by_id(map2_id);
- if (CHECK(fd >= 0, "map2_leak", "inner_map2 leaked!\n")) {
- close(fd);
- goto cleanup;
- }
-
cleanup:
test_btf_map_in_map__destroy(skel);
}
--
2.43.0
From: Eric Dumazet <[email protected]>
[ Upstream commit 40dc8ab605894acae1473e434944924a22cfaaa0 ]
Many syzbot reports are pointing to soft lockups in
batadv_purge_orig_ref() [1]
Root cause is unknown, but we can avoid spending too much
time there and perhaps get more interesting reports.
[1]
watchdog: BUG: soft lockup - CPU#0 stuck for 27s! [kworker/u4:6:621]
Modules linked in:
irq event stamp: 6182794
hardirqs last enabled at (6182793): [<ffff8000801dae10>] __local_bh_enable_ip+0x224/0x44c kernel/softirq.c:386
hardirqs last disabled at (6182794): [<ffff80008ad66a78>] __el1_irq arch/arm64/kernel/entry-common.c:533 [inline]
hardirqs last disabled at (6182794): [<ffff80008ad66a78>] el1_interrupt+0x24/0x68 arch/arm64/kernel/entry-common.c:551
softirqs last enabled at (6182792): [<ffff80008aab71c4>] spin_unlock_bh include/linux/spinlock.h:396 [inline]
softirqs last enabled at (6182792): [<ffff80008aab71c4>] batadv_purge_orig_ref+0x114c/0x1228 net/batman-adv/originator.c:1287
softirqs last disabled at (6182790): [<ffff80008aab61dc>] spin_lock_bh include/linux/spinlock.h:356 [inline]
softirqs last disabled at (6182790): [<ffff80008aab61dc>] batadv_purge_orig_ref+0x164/0x1228 net/batman-adv/originator.c:1271
CPU: 0 PID: 621 Comm: kworker/u4:6 Not tainted 6.8.0-rc7-syzkaller-g707081b61156 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 02/29/2024
Workqueue: bat_events batadv_purge_orig
pstate: 80400005 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : should_resched arch/arm64/include/asm/preempt.h:79 [inline]
pc : __local_bh_enable_ip+0x228/0x44c kernel/softirq.c:388
lr : __local_bh_enable_ip+0x224/0x44c kernel/softirq.c:386
sp : ffff800099007970
x29: ffff800099007980 x28: 1fffe00018fce1bd x27: dfff800000000000
x26: ffff0000d2620008 x25: ffff0000c7e70de8 x24: 0000000000000001
x23: 1fffe00018e57781 x22: dfff800000000000 x21: ffff80008aab71c4
x20: ffff0001b40136c0 x19: ffff0000c72bbc08 x18: 1fffe0001a817bb0
x17: ffff800125414000 x16: ffff80008032116c x15: 0000000000000001
x14: 1fffe0001ee9d610 x13: 0000000000000000 x12: 0000000000000003
x11: 0000000000000000 x10: 0000000000ff0100 x9 : 0000000000000000
x8 : 00000000005e5789 x7 : ffff80008aab61dc x6 : 0000000000000000
x5 : 0000000000000000 x4 : 0000000000000001 x3 : 0000000000000000
x2 : 0000000000000006 x1 : 0000000000000080 x0 : ffff800125414000
Call trace:
__daif_local_irq_enable arch/arm64/include/asm/irqflags.h:27 [inline]
arch_local_irq_enable arch/arm64/include/asm/irqflags.h:49 [inline]
__local_bh_enable_ip+0x228/0x44c kernel/softirq.c:386
__raw_spin_unlock_bh include/linux/spinlock_api_smp.h:167 [inline]
_raw_spin_unlock_bh+0x3c/0x4c kernel/locking/spinlock.c:210
spin_unlock_bh include/linux/spinlock.h:396 [inline]
batadv_purge_orig_ref+0x114c/0x1228 net/batman-adv/originator.c:1287
batadv_purge_orig+0x20/0x70 net/batman-adv/originator.c:1300
process_one_work+0x694/0x1204 kernel/workqueue.c:2633
process_scheduled_works kernel/workqueue.c:2706 [inline]
worker_thread+0x938/0xef4 kernel/workqueue.c:2787
kthread+0x288/0x310 kernel/kthread.c:388
ret_from_fork+0x10/0x20 arch/arm64/kernel/entry.S:860
Sending NMI from CPU 0 to CPUs 1:
NMI backtrace for cpu 1
CPU: 1 PID: 0 Comm: swapper/1 Not tainted 6.8.0-rc7-syzkaller-g707081b61156 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 02/29/2024
pstate: 80400005 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : arch_local_irq_enable+0x8/0xc arch/arm64/include/asm/irqflags.h:51
lr : default_idle_call+0xf8/0x128 kernel/sched/idle.c:103
sp : ffff800093a17d30
x29: ffff800093a17d30 x28: dfff800000000000 x27: 1ffff00012742fb4
x26: ffff80008ec9d000 x25: 0000000000000000 x24: 0000000000000002
x23: 1ffff00011d93a74 x22: ffff80008ec9d3a0 x21: 0000000000000000
x20: ffff0000c19dbc00 x19: ffff8000802d0fd8 x18: 1fffe00036804396
x17: ffff80008ec9d000 x16: ffff8000802d089c x15: 0000000000000001
x14: 1fffe00036805f10 x13: 0000000000000000 x12: 0000000000000003
x11: 0000000000000001 x10: 0000000000000003 x9 : 0000000000000000
x8 : 00000000000ce8d1 x7 : ffff8000804609e4 x6 : 0000000000000000
x5 : 0000000000000001 x4 : 0000000000000001 x3 : ffff80008ad6aac0
x2 : 0000000000000000 x1 : ffff80008aedea60 x0 : ffff800125436000
Call trace:
__daif_local_irq_enable arch/arm64/include/asm/irqflags.h:27 [inline]
arch_local_irq_enable+0x8/0xc arch/arm64/include/asm/irqflags.h:49
cpuidle_idle_call kernel/sched/idle.c:170 [inline]
do_idle+0x1f0/0x4e8 kernel/sched/idle.c:312
cpu_startup_entry+0x5c/0x74 kernel/sched/idle.c:410
secondary_start_kernel+0x198/0x1c0 arch/arm64/kernel/smp.c:272
__secondary_switched+0xb8/0xbc arch/arm64/kernel/head.S:404
Signed-off-by: Eric Dumazet <[email protected]>
Signed-off-by: Sven Eckelmann <[email protected]>
Signed-off-by: Simon Wunderlich <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/batman-adv/originator.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/net/batman-adv/originator.c b/net/batman-adv/originator.c
index aadc653ca1d80..b6367a7576750 100644
--- a/net/batman-adv/originator.c
+++ b/net/batman-adv/originator.c
@@ -1238,6 +1238,8 @@ void batadv_purge_orig_ref(struct batadv_priv *bat_priv)
/* for all origins... */
for (i = 0; i < hash->size; i++) {
head = &hash->table[i];
+ if (hlist_empty(head))
+ continue;
list_lock = &hash->list_locks[i];
spin_lock_bh(list_lock);
--
2.43.0
From: Manish Rangankar <[email protected]>
[ Upstream commit 28027ec8e32ecbadcd67623edb290dad61e735b5 ]
The qedi_dbg_do_not_recover_cmd_read() function invokes sprintf() directly
on a __user pointer, which results into the crash.
To fix this issue, use a small local stack buffer for sprintf() and then
call simple_read_from_buffer(), which in turns make the copy_to_user()
call.
BUG: unable to handle page fault for address: 00007f4801111000
PGD 8000000864df6067 P4D 8000000864df6067 PUD 864df7067 PMD 846028067 PTE 0
Oops: 0002 [#1] PREEMPT SMP PTI
Hardware name: HPE ProLiant DL380 Gen10/ProLiant DL380 Gen10, BIOS U30 06/15/2023
RIP: 0010:memcpy_orig+0xcd/0x130
RSP: 0018:ffffb7a18c3ffc40 EFLAGS: 00010202
RAX: 00007f4801111000 RBX: 00007f4801111000 RCX: 000000000000000f
RDX: 000000000000000f RSI: ffffffffc0bfd7a0 RDI: 00007f4801111000
RBP: ffffffffc0bfd7a0 R08: 725f746f6e5f6f64 R09: 3d7265766f636572
R10: ffffb7a18c3ffd08 R11: 0000000000000000 R12: 00007f4881110fff
R13: 000000007fffffff R14: ffffb7a18c3ffca0 R15: ffffffffc0bfd7af
FS: 00007f480118a740(0000) GS:ffff98e38af00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f4801111000 CR3: 0000000864b8e001 CR4: 00000000007706e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
PKRU: 55555554
Call Trace:
<TASK>
? __die_body+0x1a/0x60
? page_fault_oops+0x183/0x510
? exc_page_fault+0x69/0x150
? asm_exc_page_fault+0x22/0x30
? memcpy_orig+0xcd/0x130
vsnprintf+0x102/0x4c0
sprintf+0x51/0x80
qedi_dbg_do_not_recover_cmd_read+0x2f/0x50 [qedi 6bcfdeeecdea037da47069eca2ba717c84a77324]
full_proxy_read+0x50/0x80
vfs_read+0xa5/0x2e0
? folio_add_new_anon_rmap+0x44/0xa0
? set_pte_at+0x15/0x30
? do_pte_missing+0x426/0x7f0
ksys_read+0xa5/0xe0
do_syscall_64+0x58/0x80
? __count_memcg_events+0x46/0x90
? count_memcg_event_mm+0x3d/0x60
? handle_mm_fault+0x196/0x2f0
? do_user_addr_fault+0x267/0x890
? exc_page_fault+0x69/0x150
entry_SYSCALL_64_after_hwframe+0x72/0xdc
RIP: 0033:0x7f4800f20b4d
Tested-by: Martin Hoyer <[email protected]>
Reviewed-by: John Meneghini <[email protected]>
Signed-off-by: Manish Rangankar <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/scsi/qedi/qedi_debugfs.c | 12 ++++--------
1 file changed, 4 insertions(+), 8 deletions(-)
diff --git a/drivers/scsi/qedi/qedi_debugfs.c b/drivers/scsi/qedi/qedi_debugfs.c
index 42f5afb60055c..6e724f47ab9e8 100644
--- a/drivers/scsi/qedi/qedi_debugfs.c
+++ b/drivers/scsi/qedi/qedi_debugfs.c
@@ -120,15 +120,11 @@ static ssize_t
qedi_dbg_do_not_recover_cmd_read(struct file *filp, char __user *buffer,
size_t count, loff_t *ppos)
{
- size_t cnt = 0;
-
- if (*ppos)
- return 0;
+ char buf[64];
+ int len;
- cnt = sprintf(buffer, "do_not_recover=%d\n", qedi_do_not_recover);
- cnt = min_t(int, count, cnt - *ppos);
- *ppos += cnt;
- return cnt;
+ len = sprintf(buf, "do_not_recover=%d\n", qedi_do_not_recover);
+ return simple_read_from_buffer(buffer, count, ppos, buf, len);
}
static int
--
2.43.0
From: Eric Dumazet <[email protected]>
[ Upstream commit 86d43e2bf93ccac88ef71cee36a23282ebd9e427 ]
Although the code is correct, the following line
copy_from_sockptr(&req_u.req, optval, len));
triggers this warning :
memcpy: detected field-spanning write (size 28) of single field "dst" at include/linux/sockptr.h:49 (size 16)
Refactor the code to be more explicit.
Reported-by: syzbot <[email protected]>
Signed-off-by: Eric Dumazet <[email protected]>
Cc: Kees Cook <[email protected]>
Cc: Willem de Bruijn <[email protected]>
Reviewed-by: Kees Cook <[email protected]>
Reviewed-by: Willem de Bruijn <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/packet/af_packet.c | 26 ++++++++++++++------------
1 file changed, 14 insertions(+), 12 deletions(-)
diff --git a/net/packet/af_packet.c b/net/packet/af_packet.c
index cffa217fb3063..787036afa69a5 100644
--- a/net/packet/af_packet.c
+++ b/net/packet/af_packet.c
@@ -3762,28 +3762,30 @@ packet_setsockopt(struct socket *sock, int level, int optname, sockptr_t optval,
case PACKET_TX_RING:
{
union tpacket_req_u req_u;
- int len;
+ ret = -EINVAL;
lock_sock(sk);
switch (po->tp_version) {
case TPACKET_V1:
case TPACKET_V2:
- len = sizeof(req_u.req);
+ if (optlen < sizeof(req_u.req))
+ break;
+ ret = copy_from_sockptr(&req_u.req, optval,
+ sizeof(req_u.req)) ?
+ -EINVAL : 0;
break;
case TPACKET_V3:
default:
- len = sizeof(req_u.req3);
+ if (optlen < sizeof(req_u.req3))
+ break;
+ ret = copy_from_sockptr(&req_u.req3, optval,
+ sizeof(req_u.req3)) ?
+ -EINVAL : 0;
break;
}
- if (optlen < len) {
- ret = -EINVAL;
- } else {
- if (copy_from_sockptr(&req_u.req, optval, len))
- ret = -EFAULT;
- else
- ret = packet_set_ring(sk, &req_u, 0,
- optname == PACKET_TX_RING);
- }
+ if (!ret)
+ ret = packet_set_ring(sk, &req_u, 0,
+ optname == PACKET_TX_RING);
release_sock(sk);
return ret;
}
--
2.43.0
From: Wander Lairson Costa <[email protected]>
[ Upstream commit f1e197a665c2148ebc25fe09c53689e60afea195 ]
trace_drop_common() is called with preemption disabled, and it acquires
a spin_lock. This is problematic for RT kernels because spin_locks are
sleeping locks in this configuration, which causes the following splat:
BUG: sleeping function called from invalid context at kernel/locking/spinlock_rt.c:48
in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 449, name: rcuc/47
preempt_count: 1, expected: 0
RCU nest depth: 2, expected: 2
5 locks held by rcuc/47/449:
#0: ff1100086ec30a60 ((softirq_ctrl.lock)){+.+.}-{2:2}, at: __local_bh_disable_ip+0x105/0x210
#1: ffffffffb394a280 (rcu_read_lock){....}-{1:2}, at: rt_spin_lock+0xbf/0x130
#2: ffffffffb394a280 (rcu_read_lock){....}-{1:2}, at: __local_bh_disable_ip+0x11c/0x210
#3: ffffffffb394a160 (rcu_callback){....}-{0:0}, at: rcu_do_batch+0x360/0xc70
#4: ff1100086ee07520 (&data->lock){+.+.}-{2:2}, at: trace_drop_common.constprop.0+0xb5/0x290
irq event stamp: 139909
hardirqs last enabled at (139908): [<ffffffffb1df2b33>] _raw_spin_unlock_irqrestore+0x63/0x80
hardirqs last disabled at (139909): [<ffffffffb19bd03d>] trace_drop_common.constprop.0+0x26d/0x290
softirqs last enabled at (139892): [<ffffffffb07a1083>] __local_bh_enable_ip+0x103/0x170
softirqs last disabled at (139898): [<ffffffffb0909b33>] rcu_cpu_kthread+0x93/0x1f0
Preemption disabled at:
[<ffffffffb1de786b>] rt_mutex_slowunlock+0xab/0x2e0
CPU: 47 PID: 449 Comm: rcuc/47 Not tainted 6.9.0-rc2-rt1+ #7
Hardware name: Dell Inc. PowerEdge R650/0Y2G81, BIOS 1.6.5 04/15/2022
Call Trace:
<TASK>
dump_stack_lvl+0x8c/0xd0
dump_stack+0x14/0x20
__might_resched+0x21e/0x2f0
rt_spin_lock+0x5e/0x130
? trace_drop_common.constprop.0+0xb5/0x290
? skb_queue_purge_reason.part.0+0x1bf/0x230
trace_drop_common.constprop.0+0xb5/0x290
? preempt_count_sub+0x1c/0xd0
? _raw_spin_unlock_irqrestore+0x4a/0x80
? __pfx_trace_drop_common.constprop.0+0x10/0x10
? rt_mutex_slowunlock+0x26a/0x2e0
? skb_queue_purge_reason.part.0+0x1bf/0x230
? __pfx_rt_mutex_slowunlock+0x10/0x10
? skb_queue_purge_reason.part.0+0x1bf/0x230
trace_kfree_skb_hit+0x15/0x20
trace_kfree_skb+0xe9/0x150
kfree_skb_reason+0x7b/0x110
skb_queue_purge_reason.part.0+0x1bf/0x230
? __pfx_skb_queue_purge_reason.part.0+0x10/0x10
? mark_lock.part.0+0x8a/0x520
..
trace_drop_common() also disables interrupts, but this is a minor issue
because we could easily replace it with a local_lock.
Replace the spin_lock with raw_spin_lock to avoid sleeping in atomic
context.
Signed-off-by: Wander Lairson Costa <[email protected]>
Reported-by: Hu Chunyu <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/core/drop_monitor.c | 20 ++++++++++----------
1 file changed, 10 insertions(+), 10 deletions(-)
diff --git a/net/core/drop_monitor.c b/net/core/drop_monitor.c
index 937d74aeef547..d9a6cdc48cb2c 100644
--- a/net/core/drop_monitor.c
+++ b/net/core/drop_monitor.c
@@ -73,7 +73,7 @@ struct net_dm_hw_entries {
};
struct per_cpu_dm_data {
- spinlock_t lock; /* Protects 'skb', 'hw_entries' and
+ raw_spinlock_t lock; /* Protects 'skb', 'hw_entries' and
* 'send_timer'
*/
union {
@@ -169,9 +169,9 @@ static struct sk_buff *reset_per_cpu_data(struct per_cpu_dm_data *data)
err:
mod_timer(&data->send_timer, jiffies + HZ / 10);
out:
- spin_lock_irqsave(&data->lock, flags);
+ raw_spin_lock_irqsave(&data->lock, flags);
swap(data->skb, skb);
- spin_unlock_irqrestore(&data->lock, flags);
+ raw_spin_unlock_irqrestore(&data->lock, flags);
if (skb) {
struct nlmsghdr *nlh = (struct nlmsghdr *)skb->data;
@@ -226,7 +226,7 @@ static void trace_drop_common(struct sk_buff *skb, void *location)
local_irq_save(flags);
data = this_cpu_ptr(&dm_cpu_data);
- spin_lock(&data->lock);
+ raw_spin_lock(&data->lock);
dskb = data->skb;
if (!dskb)
@@ -260,7 +260,7 @@ static void trace_drop_common(struct sk_buff *skb, void *location)
}
out:
- spin_unlock_irqrestore(&data->lock, flags);
+ raw_spin_unlock_irqrestore(&data->lock, flags);
}
static void trace_kfree_skb_hit(void *ignore, struct sk_buff *skb,
@@ -321,9 +321,9 @@ net_dm_hw_reset_per_cpu_data(struct per_cpu_dm_data *hw_data)
mod_timer(&hw_data->send_timer, jiffies + HZ / 10);
}
- spin_lock_irqsave(&hw_data->lock, flags);
+ raw_spin_lock_irqsave(&hw_data->lock, flags);
swap(hw_data->hw_entries, hw_entries);
- spin_unlock_irqrestore(&hw_data->lock, flags);
+ raw_spin_unlock_irqrestore(&hw_data->lock, flags);
return hw_entries;
}
@@ -455,7 +455,7 @@ net_dm_hw_trap_summary_probe(void *ignore, const struct devlink *devlink,
return;
hw_data = this_cpu_ptr(&dm_hw_cpu_data);
- spin_lock_irqsave(&hw_data->lock, flags);
+ raw_spin_lock_irqsave(&hw_data->lock, flags);
hw_entries = hw_data->hw_entries;
if (!hw_entries)
@@ -484,7 +484,7 @@ net_dm_hw_trap_summary_probe(void *ignore, const struct devlink *devlink,
}
out:
- spin_unlock_irqrestore(&hw_data->lock, flags);
+ raw_spin_unlock_irqrestore(&hw_data->lock, flags);
}
static const struct net_dm_alert_ops net_dm_alert_summary_ops = {
@@ -1671,7 +1671,7 @@ static struct notifier_block dropmon_net_notifier = {
static void __net_dm_cpu_data_init(struct per_cpu_dm_data *data)
{
- spin_lock_init(&data->lock);
+ raw_spin_lock_init(&data->lock);
skb_queue_head_init(&data->drop_queue);
u64_stats_init(&data->stats.syncp);
}
--
2.43.0
From: Kunwu Chan <[email protected]>
[ Upstream commit 80164282b3620a3cb73de6ffda5592743e448d0e ]
There is a 'malloc' call, which can be unsuccessful.
This patch will add the malloc failure checking
to avoid possible null dereference and give more information
about test fail reasons.
Signed-off-by: Kunwu Chan <[email protected]>
Reviewed-by: Muhammad Usama Anjum <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Will Deacon <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
tools/testing/selftests/arm64/tags/tags_test.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/tools/testing/selftests/arm64/tags/tags_test.c b/tools/testing/selftests/arm64/tags/tags_test.c
index 5701163460ef7..955f87c1170d7 100644
--- a/tools/testing/selftests/arm64/tags/tags_test.c
+++ b/tools/testing/selftests/arm64/tags/tags_test.c
@@ -6,6 +6,7 @@
#include <stdint.h>
#include <sys/prctl.h>
#include <sys/utsname.h>
+#include "../../kselftest.h"
#define SHIFT_TAG(tag) ((uint64_t)(tag) << 56)
#define SET_TAG(ptr, tag) (((uint64_t)(ptr) & ~SHIFT_TAG(0xff)) | \
@@ -21,6 +22,9 @@ int main(void)
if (prctl(PR_SET_TAGGED_ADDR_CTRL, PR_TAGGED_ADDR_ENABLE, 0, 0, 0) == 0)
tbi_enabled = 1;
ptr = (struct utsname *)malloc(sizeof(*ptr));
+ if (!ptr)
+ ksft_exit_fail_msg("Failed to allocate utsname buffer\n");
+
if (tbi_enabled)
tag = 0x42;
ptr = (struct utsname *)SET_TAG(ptr, tag);
--
2.43.0
From: Breno Leitao <[email protected]>
[ Upstream commit c2e6a872bde9912f1a7579639c5ca3adf1003916 ]
KCSAN detected a race condition in netpoll:
BUG: KCSAN: data-race in net_rx_action / netpoll_send_skb
write (marked) to 0xffff8881164168b0 of 4 bytes by interrupt on cpu 10:
net_rx_action (./include/linux/netpoll.h:90 net/core/dev.c:6712 net/core/dev.c:6822)
<snip>
read to 0xffff8881164168b0 of 4 bytes by task 1 on cpu 2:
netpoll_send_skb (net/core/netpoll.c:319 net/core/netpoll.c:345 net/core/netpoll.c:393)
netpoll_send_udp (net/core/netpoll.c:?)
<snip>
value changed: 0x0000000a -> 0xffffffff
This happens because netpoll_owner_active() needs to check if the
current CPU is the owner of the lock, touching napi->poll_owner
non atomically. The ->poll_owner field contains the current CPU holding
the lock.
Use an atomic read to check if the poll owner is the current CPU.
Signed-off-by: Breno Leitao <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/core/netpoll.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/net/core/netpoll.c b/net/core/netpoll.c
index 47a86da6ab980..2a9d95368d5a2 100644
--- a/net/core/netpoll.c
+++ b/net/core/netpoll.c
@@ -316,7 +316,7 @@ static int netpoll_owner_active(struct net_device *dev)
struct napi_struct *napi;
list_for_each_entry_rcu(napi, &dev->napi_list, dev_list) {
- if (napi->poll_owner == smp_processor_id())
+ if (READ_ONCE(napi->poll_owner) == smp_processor_id())
return 1;
}
return 0;
--
2.43.0
From: Benjamin Tissoires <[email protected]>
[ Upstream commit 4e6d2a297dd5be26ad409b7a05b20bd033d1c95e ]
Duplicate of commit 0db117359e47 ("HID: add quirk for 03f0:464a HP Elite
Presenter Mouse"), but in a slightly better way.
This time we actually change the application collection, making clearer
for userspace what the second mouse is.
Note that having both hid-quirks fix and this HID-BPF fix is not a
problem at all.
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Peter Hutterer <[email protected]>
Signed-off-by: Benjamin Tissoires <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
.../hid/bpf/progs/HP__Elite-Presenter.bpf.c | 58 +++++++++++++++++++
1 file changed, 58 insertions(+)
create mode 100644 drivers/hid/bpf/progs/HP__Elite-Presenter.bpf.c
diff --git a/drivers/hid/bpf/progs/HP__Elite-Presenter.bpf.c b/drivers/hid/bpf/progs/HP__Elite-Presenter.bpf.c
new file mode 100644
index 0000000000000..3d14bbb6f2762
--- /dev/null
+++ b/drivers/hid/bpf/progs/HP__Elite-Presenter.bpf.c
@@ -0,0 +1,58 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/* Copyright (c) 2023 Benjamin Tissoires
+ */
+
+#include "vmlinux.h"
+#include "hid_bpf.h"
+#include "hid_bpf_helpers.h"
+#include <bpf/bpf_tracing.h>
+
+#define VID_HP 0x03F0
+#define PID_ELITE_PRESENTER 0x464A
+
+HID_BPF_CONFIG(
+ HID_DEVICE(BUS_BLUETOOTH, HID_GROUP_GENERIC, VID_HP, PID_ELITE_PRESENTER)
+);
+
+/*
+ * Already fixed as of commit 0db117359e47 ("HID: add quirk for 03f0:464a
+ * HP Elite Presenter Mouse") in the kernel, but this is a slightly better
+ * fix.
+ *
+ * The HP Elite Presenter Mouse HID Record Descriptor shows
+ * two mice (Report ID 0x1 and 0x2), one keypad (Report ID 0x5),
+ * two Consumer Controls (Report IDs 0x6 and 0x3).
+ * Prior to these fixes it registers one mouse, one keypad
+ * and one Consumer Control, and it was usable only as a
+ * digital laser pointer (one of the two mouses).
+ * We replace the second mouse collection with a pointer collection,
+ * allowing to use the device both as a mouse and a digital laser
+ * pointer.
+ */
+
+SEC("fmod_ret/hid_bpf_rdesc_fixup")
+int BPF_PROG(hid_fix_rdesc, struct hid_bpf_ctx *hctx)
+{
+ __u8 *data = hid_bpf_get_data(hctx, 0 /* offset */, 4096 /* size */);
+
+ if (!data)
+ return 0; /* EPERM check */
+
+ /* replace application mouse by application pointer on the second collection */
+ if (data[79] == 0x02)
+ data[79] = 0x01;
+
+ return 0;
+}
+
+SEC("syscall")
+int probe(struct hid_bpf_probe_args *ctx)
+{
+ ctx->retval = ctx->rdesc_size != 264;
+ if (ctx->retval)
+ ctx->retval = -EINVAL;
+
+ return 0;
+}
+
+char _license[] SEC("license") = "GPL";
--
2.43.0
From: Sean O'Brien <[email protected]>
[ Upstream commit dd2c345a94cfa3873cc20db87387ee509c345c1b ]
This device sometimes doesn't send touch release signals when moving
from >=4 fingers to <4 fingers. Using MT_QUIRK_NOT_SEEN_MEANS_UP instead
of MT_QUIRK_ALWAYS_VALID makes sure that no touches become stuck.
MT_QUIRK_FORCE_MULTI_INPUT is not necessary for this device, but does no
harm.
Signed-off-by: Sean O'Brien <[email protected]>
Signed-off-by: Jiri Kosina <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/hid/hid-ids.h | 1 +
drivers/hid/hid-multitouch.c | 6 ++++++
2 files changed, 7 insertions(+)
diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h
index 7b1fdfde5b405..0504bdd465013 100644
--- a/drivers/hid/hid-ids.h
+++ b/drivers/hid/hid-ids.h
@@ -777,6 +777,7 @@
#define USB_DEVICE_ID_LOGITECH_AUDIOHUB 0x0a0e
#define USB_DEVICE_ID_LOGITECH_T651 0xb00c
#define USB_DEVICE_ID_LOGITECH_DINOVO_EDGE_KBD 0xb309
+#define USB_DEVICE_ID_LOGITECH_CASA_TOUCHPAD 0xbb00
#define USB_DEVICE_ID_LOGITECH_C007 0xc007
#define USB_DEVICE_ID_LOGITECH_C077 0xc077
#define USB_DEVICE_ID_LOGITECH_RECEIVER 0xc101
diff --git a/drivers/hid/hid-multitouch.c b/drivers/hid/hid-multitouch.c
index 2e14e3071aa69..fea27d66d91c0 100644
--- a/drivers/hid/hid-multitouch.c
+++ b/drivers/hid/hid-multitouch.c
@@ -2082,6 +2082,12 @@ static const struct hid_device_id mt_devices[] = {
USB_VENDOR_ID_LENOVO,
USB_DEVICE_ID_LENOVO_X12_TAB) },
+ /* Logitech devices */
+ { .driver_data = MT_CLS_NSMU,
+ HID_DEVICE(BUS_BLUETOOTH, HID_GROUP_MULTITOUCH_WIN_8,
+ USB_VENDOR_ID_LOGITECH,
+ USB_DEVICE_ID_LOGITECH_CASA_TOUCHPAD) },
+
/* MosArt panels */
{ .driver_data = MT_CLS_CONFIDENCE_MINUS_ONE,
MT_USB_DEVICE(USB_VENDOR_ID_ASUS,
--
2.43.0
From: Takashi Iwai <[email protected]>
[ Upstream commit c901f63dc142c48326931f164f787dfff69273d9 ]
Lenovo Slim 7 16ARH7 is a machine with switchable graphics between AMD
and Nvidia, and the backlight can't be adjusted properly unless
acpi_backlight=native is passed. Although nvidia-wmi-backlight is
present and loaded, this doesn't work as expected at all.
For making it working as default, add the corresponding quirk entry
with a DMI matching "LENOVO" "82UX".
Link: https://bugzilla.suse.com/show_bug.cgi?id=1217750
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/acpi/video_detect.c | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/drivers/acpi/video_detect.c b/drivers/acpi/video_detect.c
index a5cb9e1d48bcc..338e1f44906a9 100644
--- a/drivers/acpi/video_detect.c
+++ b/drivers/acpi/video_detect.c
@@ -341,6 +341,14 @@ static const struct dmi_system_id video_detect_dmi_table[] = {
DMI_MATCH(DMI_PRODUCT_NAME, "82BK"),
},
},
+ {
+ .callback = video_detect_force_native,
+ /* Lenovo Slim 7 16ARH7 */
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "82UX"),
+ },
+ },
{
.callback = video_detect_force_native,
/* Lenovo ThinkPad X131e (3371 AMD version) */
--
2.43.0
On May 27 2024, Sasha Levin wrote:
> From: Benjamin Tissoires <[email protected]>
>
> [ Upstream commit 4e6d2a297dd5be26ad409b7a05b20bd033d1c95e ]
>
> Duplicate of commit 0db117359e47 ("HID: add quirk for 03f0:464a HP Elite
> Presenter Mouse"), but in a slightly better way.
>
> This time we actually change the application collection, making clearer
> for userspace what the second mouse is.
>
> Note that having both hid-quirks fix and this HID-BPF fix is not a
> problem at all.
Please drop this patch in all backports (and FWIW, any fix in drivers/hid/bpf/progs/).
HID-BPF is only available since kernel v6.3, and the compilation output
of the in-tree file is not used directly, but shipped from udev-hid-bpf.
TL;DR: this just adds noise to those stable kernel trees.
Cheers,
Benjamin
>
> Link: https://lore.kernel.org/r/[email protected]
> Reviewed-by: Peter Hutterer <[email protected]>
> Signed-off-by: Benjamin Tissoires <[email protected]>
> Signed-off-by: Sasha Levin <[email protected]>
> ---
> .../hid/bpf/progs/HP__Elite-Presenter.bpf.c | 58 +++++++++++++++++++
> 1 file changed, 58 insertions(+)
> create mode 100644 drivers/hid/bpf/progs/HP__Elite-Presenter.bpf.c
>
> diff --git a/drivers/hid/bpf/progs/HP__Elite-Presenter.bpf.c b/drivers/hid/bpf/progs/HP__Elite-Presenter.bpf.c
> new file mode 100644
> index 0000000000000..3d14bbb6f2762
> --- /dev/null
> +++ b/drivers/hid/bpf/progs/HP__Elite-Presenter.bpf.c
> @@ -0,0 +1,58 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/* Copyright (c) 2023 Benjamin Tissoires
> + */
> +
> +#include "vmlinux.h"
> +#include "hid_bpf.h"
> +#include "hid_bpf_helpers.h"
> +#include <bpf/bpf_tracing.h>
> +
> +#define VID_HP 0x03F0
> +#define PID_ELITE_PRESENTER 0x464A
> +
> +HID_BPF_CONFIG(
> + HID_DEVICE(BUS_BLUETOOTH, HID_GROUP_GENERIC, VID_HP, PID_ELITE_PRESENTER)
> +);
> +
> +/*
> + * Already fixed as of commit 0db117359e47 ("HID: add quirk for 03f0:464a
> + * HP Elite Presenter Mouse") in the kernel, but this is a slightly better
> + * fix.
> + *
> + * The HP Elite Presenter Mouse HID Record Descriptor shows
> + * two mice (Report ID 0x1 and 0x2), one keypad (Report ID 0x5),
> + * two Consumer Controls (Report IDs 0x6 and 0x3).
> + * Prior to these fixes it registers one mouse, one keypad
> + * and one Consumer Control, and it was usable only as a
> + * digital laser pointer (one of the two mouses).
> + * We replace the second mouse collection with a pointer collection,
> + * allowing to use the device both as a mouse and a digital laser
> + * pointer.
> + */
> +
> +SEC("fmod_ret/hid_bpf_rdesc_fixup")
> +int BPF_PROG(hid_fix_rdesc, struct hid_bpf_ctx *hctx)
> +{
> + __u8 *data = hid_bpf_get_data(hctx, 0 /* offset */, 4096 /* size */);
> +
> + if (!data)
> + return 0; /* EPERM check */
> +
> + /* replace application mouse by application pointer on the second collection */
> + if (data[79] == 0x02)
> + data[79] = 0x01;
> +
> + return 0;
> +}
> +
> +SEC("syscall")
> +int probe(struct hid_bpf_probe_args *ctx)
> +{
> + ctx->retval = ctx->rdesc_size != 264;
> + if (ctx->retval)
> + ctx->retval = -EINVAL;
> +
> + return 0;
> +}
> +
> +char _license[] SEC("license") = "GPL";
> --
> 2.43.0
>