Add the required nodes to support the A740 GPU.
Signed-off-by: Konrad Dybcio <[email protected]>
---
arch/arm64/boot/dts/qcom/sm8550.dtsi | 166 +++++++++++++++++++++++++++++++++++
1 file changed, 166 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sm8550.dtsi b/arch/arm64/boot/dts/qcom/sm8550.dtsi
index 7bafb3d88d69..8f6641c58b3b 100644
--- a/arch/arm64/boot/dts/qcom/sm8550.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8550.dtsi
@@ -2841,6 +2841,172 @@ dispcc: clock-controller@af00000 {
#power-domain-cells = <1>;
};
+ gpu: gpu@3d00000 {
+ compatible = "qcom,adreno-740.1", "qcom,adreno";
+ reg = <0x0 0x03d00000 0x0 0x40000>,
+ <0x0 0x03d9e000 0x0 0x1000>,
+ <0x0 0x03d61000 0x0 0x800>;
+ reg-names = "kgsl_3d0_reg_memory",
+ "cx_mem",
+ "cx_dbgc";
+
+ interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>;
+
+ iommus = <&adreno_smmu 0 0x0>,
+ <&adreno_smmu 1 0x0>;
+
+ operating-points-v2 = <&gpu_opp_table>;
+
+ qcom,gmu = <&gmu>;
+
+ status = "disabled";
+
+ zap-shader {
+ memory-region = <&gpu_micro_code_mem>;
+ };
+
+ /* Speedbin needs more work on A740+, keep only lower freqs */
+ gpu_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ opp-680000000 {
+ opp-hz = /bits/ 64 <680000000>;
+ opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
+ };
+
+ opp-615000000 {
+ opp-hz = /bits/ 64 <615000000>;
+ opp-level = <RPMH_REGULATOR_LEVEL_SVS_L0>;
+ };
+
+ opp-550000000 {
+ opp-hz = /bits/ 64 <550000000>;
+ opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
+ };
+
+ opp-475000000 {
+ opp-hz = /bits/ 64 <475000000>;
+ opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_L1>;
+ };
+
+ opp-401000000 {
+ opp-hz = /bits/ 64 <401000000>;
+ opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
+ };
+
+ opp-348000000 {
+ opp-hz = /bits/ 64 <348000000>;
+ opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_D0>;
+ };
+
+ opp-295000000 {
+ opp-hz = /bits/ 64 <295000000>;
+ opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_D1>;
+ };
+
+ opp-220000000 {
+ opp-hz = /bits/ 64 <220000000>;
+ opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_D2>;
+ };
+ };
+ };
+
+ gmu: gmu@3d6a000 {
+ compatible = "qcom,adreno-gmu-740.1", "qcom,adreno-gmu";
+ reg = <0x0 0x03d6a000 0x0 0x35000>,
+ <0x0 0x03d50000 0x0 0x10000>,
+ <0x0 0x0b280000 0x0 0x10000>;
+ reg-names = "gmu", "rscc", "gmu_pdc";
+
+ interrupts = <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "hfi", "gmu";
+
+ clocks = <&gpucc GPU_CC_AHB_CLK>,
+ <&gpucc GPU_CC_CX_GMU_CLK>,
+ <&gpucc GPU_CC_CXO_CLK>,
+ <&gcc GCC_DDRSS_GPU_AXI_CLK>,
+ <&gcc GCC_GPU_MEMNOC_GFX_CLK>,
+ <&gpucc GPU_CC_HUB_CX_INT_CLK>,
+ <&gpucc GPU_CC_DEMET_CLK>;
+ clock-names = "ahb",
+ "gmu",
+ "cxo",
+ "axi",
+ "memnoc",
+ "hub",
+ "demet";
+
+ power-domains = <&gpucc GPU_CC_CX_GDSC>,
+ <&gpucc GPU_CC_GX_GDSC>;
+ power-domain-names = "cx",
+ "gx";
+
+ iommus = <&adreno_smmu 5 0x0>;
+
+ qcom,qmp = <&aoss_qmp>;
+
+ operating-points-v2 = <&gmu_opp_table>;
+
+ gmu_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ opp-500000000 {
+ opp-hz = /bits/ 64 <500000000>;
+ opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
+ };
+
+ opp-200000000 {
+ opp-hz = /bits/ 64 <200000000>;
+ opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
+ };
+ };
+ };
+
+ adreno_smmu: iommu@3da0000 {
+ compatible = "qcom,sm8550-smmu-500", "qcom,adreno-smmu",
+ "qcom,smmu-500", "arm,mmu-500";
+ reg = <0x0 0x03da0000 0x0 0x40000>;
+ #iommu-cells = <2>;
+ #global-interrupts = <1>;
+ interrupts = <GIC_SPI 673 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 677 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 678 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 679 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 680 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 681 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 682 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 683 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 684 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 685 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 686 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 687 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 476 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 574 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 575 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 576 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 577 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 659 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 661 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 664 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 665 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 666 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 668 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 669 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 699 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gpucc GPU_CC_HLOS1_VOTE_GPU_SMMU_CLK>,
+ <&gcc GCC_GPU_MEMNOC_GFX_CLK>,
+ <&gcc GCC_GPU_SNOC_DVM_GFX_CLK>,
+ <&gpucc GPU_CC_AHB_CLK>;
+ clock-names = "hlos",
+ "bus",
+ "iface",
+ "ahb";
+ power-domains = <&gpucc GPU_CC_CX_GDSC>;
+ dma-coherent;
+ };
+
usb_1_hsphy: phy@88e3000 {
compatible = "qcom,sm8550-snps-eusb2-phy";
reg = <0x0 0x088e3000 0x0 0x154>;
--
2.43.0
On 27.11.2023 17:20, Konrad Dybcio wrote:
> Add the required nodes to support the A740 GPU.
>
> Signed-off-by: Konrad Dybcio <[email protected]>
> ---
> arch/arm64/boot/dts/qcom/sm8550.dtsi | 166 +++++++++++++++++++++++++++++++++++
> 1 file changed, 166 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/sm8550.dtsi b/arch/arm64/boot/dts/qcom/sm8550.dtsi
> index 7bafb3d88d69..8f6641c58b3b 100644
> --- a/arch/arm64/boot/dts/qcom/sm8550.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sm8550.dtsi
> @@ -2841,6 +2841,172 @@ dispcc: clock-controller@af00000 {
> #power-domain-cells = <1>;
> };
>
> + gpu: gpu@3d00000 {
> + compatible = "qcom,adreno-740.1", "qcom,adreno";
The milisecond I pressed "send" I realized this is not the correct revision
of this patch.. The compatible needs to change.
Konrad
On Mon, Nov 27, 2023 at 05:21:30PM +0100, Konrad Dybcio wrote:
> On 27.11.2023 17:20, Konrad Dybcio wrote:
> > Add the required nodes to support the A740 GPU.
> >
> > Signed-off-by: Konrad Dybcio <[email protected]>
> > ---
> > arch/arm64/boot/dts/qcom/sm8550.dtsi | 166 +++++++++++++++++++++++++++++++++++
> > 1 file changed, 166 insertions(+)
> >
> > diff --git a/arch/arm64/boot/dts/qcom/sm8550.dtsi b/arch/arm64/boot/dts/qcom/sm8550.dtsi
> > index 7bafb3d88d69..8f6641c58b3b 100644
> > --- a/arch/arm64/boot/dts/qcom/sm8550.dtsi
> > +++ b/arch/arm64/boot/dts/qcom/sm8550.dtsi
> > @@ -2841,6 +2841,172 @@ dispcc: clock-controller@af00000 {
> > #power-domain-cells = <1>;
> > };
> >
> > + gpu: gpu@3d00000 {
> > + compatible = "qcom,adreno-740.1", "qcom,adreno";
> The milisecond I pressed "send" I realized this is not the correct revision
> of this patch.. The compatible needs to change.
>
I could have corrected it while applying the patch if you only included
the revision here...
Looking forward to v2.
Regards,
Bjorn