2002-09-22 04:26:33

by Linus Torvalds

[permalink] [raw]
Subject: Linux 2.5.38


Trying to be a bit more timely about releases, especially since some
people couldn't use 2.5.37 due to the X lockup that should hopefully
be fixed (no idea _why_ that old bug only started to matter recently, the
bug itself was several months old).

ia64 updates, a vm86 mode bug that bit XFree86 startup (and must have
bitten dosemu too, but maybe people aren't using DOS much any more), PCI
driver attach fixes, JFS, ACPI, net drivers etc.

Linus

---

Summary of changes from v2.5.37 to v2.5.38
============================================

David Mosberger <[email protected]>:
o ia64: Minor cleanups
o ia64: First draft of perfmon sampling-interval randomization
support
o ia64: Make sure register-backing store gets mapped with the right
PTE protection bits
o ia64: Fix return path of signal delivery for sigaltstack() case
o ia64: Fix narrow window during which signal could be delivered with
only the memory stack switched over to the alternate signal stack.
o Fix edge-triggered IRQ handling. See Linus's cset 1.611 for
details
o ia64: Fix comment in arch/ia64/kernel/signal.c
o ia64: Fix x86 struct ipc_kludge (reported by R Sreelatha, fix
proposed by Dave Miller).
o ia64: Preserve f11-f15 around calls into firmware. Patch by John
Marvin
o ia64: Dont execute srlz.d needlessly (reported by Chris Ruemmler)
o ia64: Fix typo in perfmon.c. (Patch by Stephane Eranian.)
o ia64: Sync up with 2.5.35+. Add ia64-specific huge page support
(by Rohit Seth)
o ia64: Make include/asm-ia64/suspend.h non-empty (suggested by Keith
Owens)
o ia64: Add arch/ia64/mm/hugetlbpage.c by Rohit Seth
o ia64: A few huge page fixes (patch by Rohit Seth)
o ia64: Fix zx1-platform support
o ia64: Sync with 2.5.37
o ia64: Reorganize initialization sequence a bit
o ia64: Switch over to using ACPI PCI support routines. This gets
rid of much of the code-duplication that existed between ACPI and
the ia64 IOSAPIC code.

<[email protected]>:
o Add support for get-MII-data ioctls in 8139cp net driver

<[email protected]>:
o Optimize __ia64_save_fpu() and __ia64_load_fpu() for Itanium 2

<[email protected]>:
o free_area_init_node fix (for non discontigmem direct use)

Alexander Viro <[email protected]>:
o gendisk for pcd, cdu31a, cm206, mcd, mcdx, sbpcd, jsflash, mtdblock_ro,
pf, swim3, loop, aztcd, gscd, optcd, sjcd, sonycd, stram, rd, nbd, xpram,
acorn floppy, swim_iop
o devfs handling for cdroms moved to register_disk()
o misc cleanups
o crapectomy and Lindent pf.c
o switch to add_disk()
o removal of bogus exports
o beginning of probe_disk() and gendisks for floppy

Andy Grover <[email protected]>:
o ACPI: change a non-critical debug message to a lower output level
o ACPI: Add include to provide PREFIX (Adrian Bunk)
o ACPI: Re-enable compilation of ACPI subordinate drivers as modules
(Bjoern A. Zeeb)

Dave Kleikamp <[email protected]>:
o JFS: Avoid parallel allocations within the same allocation group
o JFS: Slightly relax allocation group reservation
o JFS: swsusp support
o JFS: Put legacy OS/2 extended attributes in "os2." namespace
o JFS: Fix compiler errors in xattr.c

David S. Miller <[email protected]>:
o missing unlock_kernel

Erich Focht <[email protected]s.nec.de>:
o Remove global semaphore_lock for ia64, similar to i386 change for
2.5.25

Jean Tourrilhes <[email protected]>:
o Fix wavelan_cs net driver build
o update irda nsc-ircc driver
o More __FUNCTION__ cleanups for IrDA

Jeff Garzik <[email protected]>:
o Add new MII lib functions mii_check_link, mii_check_media
o Fix more IrDA __FUNCTION__ breakage. It now builds, yay

Jens Axboe <[email protected]>:
o IDE fixes

Linus Torvalds <[email protected]>:
o Don't try to attach a driver to a pci device that already has one
o Don't do a 64-bit divide when a simple shift will do
o Avoid confusion "mount" and "fsck" - don't show things like
floppies and CD's in /proc/partitions.
o Fix vm86 system call interface to entry.S. This has been broken
since the thread_info support went in (early July), and can cause
lockups at X startup etc.

Patrick Mochel <[email protected]>:
o Adding driver model support in IDE

Petr Vandrovec <[email protected]>:
o Fix NCP_IOC_SETOBJECTNAME ioctl in ncpfs
o Fix bigendian problems in ncpfs
o Add support for text mount option string to ncpfs
o ncpfs: Proper handling of watchdog packets
o ncpfs: Verify packet signatures on replies
o ncpfs: Pass unknown packets from server to userspace daemon. Now we
can deliver server messages to logged-in users even with UDP or TCP
transport.

Robert Love <[email protected]>:
o schedule() in_atomic() check

Steven Cole <[email protected]>:
o Link eepro100 net driver with mii module, fixing static build

St?phane Eranian <[email protected]>:
o ia64: perfmon update
o perfmon cleanup patch
o Fix bug in pfm_write_pmds()



2002-09-22 06:11:20

by Aniruddha Shankar

[permalink] [raw]
Subject: make bzImage fails on 2.5.38

First post to the list, I've followed the format given in REPORTING-BUGS

1. make bzImage fails on 2.5.38

2. : Error message follows:
make[2]: Entering directory `/usr/src/linux-2.5.38/fs/partitions'
gcc -Wp,-MD,./.check.o.d -D__KERNEL__ -I/usr/src/linux-2.5.38/include
-Wall -Wstrict-prototypes -Wno-trigraphs -O2 -fomit-frame-pointer
-fno-strict-aliasing -fno-common -pipe -mpreferred-stack-boundary=2
-march=i686 -I/usr/src/linux-2.5.38/arch/i386/mach-generic -nostdinc
-iwithprefix include -DKBUILD_BASENAME=check -c -o check.o check.c
check.c: In function `devfs_create_cdrom':
check.c:365: `devfs_handle' undeclared (first use in this function)
check.c:365: (Each undeclared identifier is reported only once
check.c:365: for each function it appears in.)
check.c:344: warning: unused variable `symlink'
check.c:344: warning: unused variable `dirname'
check.c:343: warning: unused variable `devfs_flags'
check.c:342: warning: unused variable `slave'
check.c:342: warning: unused variable `dir'
check.c:341: warning: unused variable `pos'
make[2]: *** [check.o] Error 1
make[2]: Leaving directory `/usr/src/linux-2.5.38/fs/partitions'
make[1]: *** [partitions] Error 2
make[1]: Leaving directory `/usr/src/linux-2.5.38/fs'
make: *** [fs] Error 2

3. keywords: 2.5.38 bzImage fs

4. kernel version :
Linux version 2.4.18-6mdk ([email protected]) (gcc version 2.95.3
20010315 (release)) #3 Wed Sep 18 19:10:38 IST 2002

7. Environment:
BASH=/bin/bash
BASH_VERSINFO=([0]="2" [1]="05a" [2]="0" [3]="1" [4]="release"
[5]="i686-pc-linux-gnu")
BASH_VERSION='2.05a.0(1)-release'
CHROMIUM_DATA=/usr/share/chromium/data
CLASSPATH=/opt/blackdown-jre-1.3.1/lib/rt.jar
COLORFGBG='7;default;0'
COLORTERM=Eterm
COLORTERM_BCE=Eterm
COLUMNS=80
CONFIG_PROTECT='/usr/kde/3/share/config /usr/share/config'
CVS_RSH=ssh
DIRSTACK=()
DISPLAY=:0.0
EBIN=/usr/bin
ECACHEDIR=/home/karim/.enlightenment
ECONFDIR=/home/karim/.enlightenment
EDITOR=/usr/bin/nano
EPID=7402
EROOT=/usr/share/enlightenment
ETERM_THEME_ROOT=/home/karim/.Eterm/themes/Eterm
ETERM_USER_ROOT=/home/karim/.Eterm/themes/Eterm
ETERM_VERSION=0.9.1
ETHEME=/home/karim/.enlightenment/themes/aqua-E
EUID=1001
EVERSION=0.16.5
GROUPS=()
HISTFILE=/home/karim/.bash_history
HISTFILESIZE=500
HISTSIZE=500
HOME=/home/karim
HOSTNAME=twentyfive.complab
HOSTTYPE=i686
IFS=$' \t\n'
INFODIR=/usr/share/info:/usr/X11R6/info
INPUTRC=/etc/inputrc
JAVA_HOME=/opt/blackdown-jre-1.3.1
JRE_HOME=/opt/blackdown-jre-1.3.1
KDEDIR=/usr/kde/3
KDEDIRS=/usr/kde/3:/usr
LESSOPEN='|lesspipe.sh %s'
LINES=24
LOGNAME=karim
LS_COLORS=
MACHTYPE=i686-pc-linux-gnu
MAILCHECK=60
MANPATH=/usr/share/man:/usr/local/share/man:/usr/X11R6/man
MOZILLA_FIVE_HOME=/usr/lib/mozilla
OLDPWD=/home/karim
OPTERR=1
OPTIND=1
OSTYPE=linux-gnu
PAGER=/usr/bin/less
PATH=/bin:/usr/bin:/usr/local/bin:/opt/bin:/opt/Acrobat5:/opt/opera/bin:/opt/rar/bin:/usr/X11R6/bin:/opt/blackdown-jre-1.3.1/bin:/usr/qt/3/bin:/usr/qt/2/bin:/usr/kde/3/bin:/usr/kde/3/bin:/usr/kde/3/bin:/usr/kde/2/bin:/opt/quake3
PIPESTATUS=([0]="0")
PPID=31050
PS1='\[\e]2;\[email protected]\h \w\a\e[33;1m\]>\[\e[0m\] '
PS2='> '
PS4='+ '
PWD=/usr/src/linux
QMAKESPEC=linux-g++
QTDIR=/usr/qt/3
SANE_CONFIG_DIR=/etc/sane.d
SHELL=/bin/bash
SHELLOPTS=braceexpand:hashall:histexpand:monitor:history:interactive-comments:emacs
SHLVL=2
TERM=Eterm
UID=1001
USER=karim
VIMRUNTIME=/usr/share/vim/vim61
WINDOWID=29360184
XDM_MANAGED=/var/run/xdmctl/xdmctl-:0,maysd,mayfn,sched
XINITRC=/etc/X11/xinit/xinitrc
XSESSION=enlightenment
_=/proc/version
ftp_proxy=http://192.168.100.4:3128
http_proxy=http://192.168.100.4:3128
https_proxy=http://192.168.100.4:3128

7.1. Software:
Linux twentyfive.complab 2.4.18-6mdk #3 Wed Sep 18 19:10:38 IST 2002 i686
GenuineIntel

Gnu C 2.95.3
Gnu make 3.79.1
util-linux 2.11u
mount 2.11u
modutils 2.4.19
e2fsprogs 1.27
Linux C Library 2.2.5
Dynamic linker (ldd) 2.2.5
Procps 2.0.7
Net-tools 1.60
Kbd 1.06
Sh-utils 2.0.11
Modules Loaded snd-pcm-oss snd-pcm snd-timer snd-mixer-oss snd

7.2. Processor Information

processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 8
model name : Celeron (Coppermine)
stepping : 10
cpu MHz : 851.950
cache size : 128 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 2
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca
cmov pat pse36 mmx fxsr sse
bogomips : 1697.38

7.3. Module Information:

snd-pcm-oss 35268 0 (autoclean) (unused)
snd-pcm 48256 0 (autoclean) [snd-pcm-oss]
snd-timer 10208 0 (autoclean) [snd-pcm]
snd-mixer-oss 8960 0 (autoclean) [snd-pcm-oss]
snd 24776 0 (autoclean) [snd-pcm-oss snd-pcm
snd-timer snd-mixer-oss]

7.4. Loaded Driver & Hardware Information:
cat /proc/ioports
0000-001f : dma1
0020-003f : pic1
0040-005f : timer
0060-006f : keyboard
0070-007f : rtc
0080-008f : dma page reg
00a0-00bf : pic2
00c0-00df : dma2
00f0-00ff : fpu
01f0-01f7 : ide0
0378-037f : i2c (Vellemann adapter)
03c0-03df : vga+
03f6-03f6 : ide0
0cf8-0cff : PCI conf1
5000-500f : Intel Corp. 82801AA SMBus
5000-5007 : i801-smbus
c000-cfff : PCI Bus #01
c000-c0ff : Davicom Semiconductor, Inc. Ethernet 100/10 MBit
c000-c0ff : dmfe
d400-d4ff : Intel Corp. 82801AA AC'97 Audio
d800-d83f : Intel Corp. 82801AA AC'97 Audio
f000-f00f : Intel Corp. 82801AA IDE
f000-f007 : ide0
f008-f00f : ide1

cat /proc/iomem
00000000-0009fbff : System RAM
0009fc00-0009ffff : reserved
000a0000-000bffff : Video RAM area
000c0000-000c7fff : Video ROM
000f0000-000fffff : System ROM
00100000-07eeffff : System RAM
00100000-00255435 : Kernel code
00255436-002b6e37 : Kernel data
07ef0000-07ef2fff : ACPI Non-volatile Storage
07ef3000-07efffff : ACPI Tables
d0000000-d3ffffff : Intel Corp. 82810 CGC [Chipset Graphics Controller]
d4000000-d5ffffff : PCI Bus #01
d5000000-d50000ff : Davicom Semiconductor, Inc. Ethernet 100/10 MBit
d5000000-d50000ff : dmfe
d6000000-d607ffff : Intel Corp. 82810 CGC [Chipset Graphics Controller]
ffb00000-ffffffff : reserved

7.5. PCI information:
00:00.0 Host bridge: Intel Corp. 82810 GMCH [Graphics Memory Controller
Hub] (rev 03)
Subsystem: A-Trend Technology Co Ltd: Unknown device 7400
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ >SERR- <PERR-
Latency: 0

00:01.0 VGA compatible controller: Intel Corp. 82810 CGC [Chipset Graphics
Controller] (rev 03) (prog-if 00 [VGA])
Subsystem: Intel Corp. 82810 CGC [Chipset Graphics Controller]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 5
Region 0: Memory at d0000000 (32-bit, prefetchable) [size=64M]
Region 1: Memory at d6000000 (32-bit, non-prefetchable) [size=512K]
Capabilities: [dc] Power Management version 1
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:1e.0 PCI bridge: Intel Corp. 82801AA PCI Bridge (rev 02) (prog-if 00
[Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: d4000000-d5ffffff
Prefetchable memory behind bridge: fff00000-000fffff
BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-

00:1f.0 ISA bridge: Intel Corp. 82801AA ISA Bridge (LPC) (rev 02)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 0

00:1f.1 IDE interface: Intel Corp. 82801AA IDE (rev 02) (prog-if 80 [Master])
Subsystem: Intel Corp. 82801AA IDE
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort+ >SERR- <PERR-
Latency: 0
Region 4: I/O ports at f000 [size=16]

00:1f.3 SMBus: Intel Corp. 82801AA SMBus (rev 02)
Subsystem: Intel Corp. 82801AA SMBus
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Interrupt: pin B routed to IRQ 11
Region 4: I/O ports at 5000 [size=16]

00:1f.5 Multimedia audio controller: Intel Corp. 82801AA AC'97 Audio (rev 02)
Subsystem: Unknown device 414c:4326
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin B routed to IRQ 11
Region 0: I/O ports at d400 [size=256]
Region 1: I/O ports at d800 [size=64]

01:09.0 Ethernet controller: Davicom Semiconductor, Inc. Ethernet 100/10
MBit (rev 31)
Subsystem: Unknown device 0291:8212
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR+
Latency: 32 (5000ns min, 10000ns max)
Interrupt: pin A routed to IRQ 11
Region 0: I/O ports at c000 [size=256]
Region 1: Memory at d5000000 (32-bit, non-prefetchable) [size=256]
Expansion ROM at <unassigned> [disabled] [size=256K]
Capabilities: [50] Power Management version 1
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-




2002-09-22 06:26:13

by Alexander Viro

[permalink] [raw]
Subject: Re: make bzImage fails on 2.5.38



On Sun, 22 Sep 2002, Aniruddha Shankar wrote:

> First post to the list, I've followed the format given in REPORTING-BUGS
>
> 1. make bzImage fails on 2.5.38

Arrgh.

ed fs/partitions/check.c <<EOF
365s/devfs_handle/cdroms/
w
q
EOF

2002-09-22 06:38:32

by Hiroshi Takekawa

[permalink] [raw]
Subject: [PATCH] Re: make bzImage fails on 2.5.38


Here's diff for this.
No sooner than had I made this diff than I read your mail...
But just replacing devfs_handle with cdroms causes weird
cdroms/cdroms/cdrom0 symlink.
Please review.

> > First post to the list, I've followed the format given in REPORTING-BUGS
> >
> > 1. make bzImage fails on 2.5.38

> Arrgh.

> ed fs/partitions/check.c <<EOF
> 365s/devfs_handle/cdroms/
> w
> q
> EOF

diff -Naur linux-2.5.38.vanilla/fs/partitions/check.c linux-2.5.38/fs/partitions/check.c
--- linux-2.5.38.vanilla/fs/partitions/check.c Sun Sep 22 15:27:26 2002
+++ linux-2.5.38/fs/partitions/check.c Sun Sep 22 15:17:10 2002
@@ -338,17 +338,13 @@
static void devfs_create_cdrom(struct gendisk *dev)
{
#ifdef CONFIG_DEVFS_FS
- int pos = 0;
- devfs_handle_t dir, slave;
- unsigned int devfs_flags = DEVFS_FL_DEFAULT;
- char dirname[64], symlink[16];
char vname[23];

if (!cdroms)
cdroms = devfs_mk_dir (NULL, "cdroms", NULL);

dev->number = devfs_alloc_unique_number(&cdrom_numspace);
- sprintf(vname, "cdroms/cdrom%d", dev->number);
+ sprintf(vname, "cdrom%d", dev->number);
if (dev->de) {
int pos;
devfs_handle_t slave;
@@ -362,13 +358,13 @@
pos = devfs_generate_path(dev->disk_de, rname+3, sizeof(rname)-3);
if (pos >= 0) {
strncpy(rname + pos, "../", 3);
- devfs_mk_symlink(devfs_handle, vname,
+ devfs_mk_symlink(cdroms, vname,
DEVFS_FL_DEFAULT,
rname + pos, &slave, NULL);
devfs_auto_unregister(dev->de, slave);
}
} else {
- dev->disk_de = devfs_register (NULL, vname, DEVFS_FL_DEFAULT,
+ dev->disk_de = devfs_register (cdroms, vname, DEVFS_FL_DEFAULT,
dev->major, dev->first_minor,
S_IFBLK | S_IRUGO | S_IWUGO,
dev->fops, NULL);

2002-09-22 06:51:48

by Aniruddha Shankar

[permalink] [raw]
Subject: Re: make bzImage fails on 2.5.38

On Sun, 2002-09-22 at 12:01, Alexander Viro wrote:

>
>
> On Sun, 22 Sep 2002, Aniruddha Shankar wrote:
>
> > First post to the list, I've followed the format given in REPORTING-BUGS
> >
> > 1. make bzImage fails on 2.5.38
>
> Arrgh.
>
> ed fs/partitions/check.c <<EOF
> 365s/devfs_handle/cdroms/
> w
> q
> EOF

it's compiling past that point, thanks. .. First time I've had to use ed
*grin*

Aniruddha shankar
Bangalore, india



2002-09-22 09:48:32

by Arjan van de Ven

[permalink] [raw]
Subject: Re: make bzImage fails on 2.5.38

On Sun, 2002-09-22 at 08:31, Alexander Viro wrote:
>
>
> On Sun, 22 Sep 2002, Aniruddha Shankar wrote:
>
> > First post to the list, I've followed the format given in REPORTING-BUGS
> >
> > 1. make bzImage fails on 2.5.38
>
> Arrgh.
>
> ed fs/partitions/check.c <<EOF
> 365s/devfs_handle/cdroms/
> w
> q
> EOF

using ed now that you can't post vi scripts ?

/me runs


Attachments:
signature.asc (189.00 B)
This is a digitally signed message part

2002-09-22 10:09:48

by Alexander Viro

[permalink] [raw]
Subject: Re: make bzImage fails on 2.5.38



On 22 Sep 2002, Arjan van de Ven wrote:

> On Sun, 2002-09-22 at 08:31, Alexander Viro wrote:
> >
> >
> > On Sun, 22 Sep 2002, Aniruddha Shankar wrote:
> >
> > > First post to the list, I've followed the format given in REPORTING-BUGS
> > >
> > > 1. make bzImage fails on 2.5.38
> >
> > Arrgh.
> >
> > ed fs/partitions/check.c <<EOF
> > 365s/devfs_handle/cdroms/
> > w
> > q
> > EOF
>
> using ed now that you can't post vi scripts ?

Hey, exact quote was "don't anybody else try to send patches as vi scripts",
so... ;-) Seriously, in that case context diff is an overkill.

2002-09-22 10:50:44

by Philipp Matthias Hahn

[permalink] [raw]
Subject: [BUG,PATCH] 2.5.38 floppy

Moin LKML!

On Sat, Sep 21, 2002 at 09:34:18PM -0700, Linus Torvalds wrote:
> Alexander Viro <[email protected]>:
> o gendisk for pcd, cdu31a, cm206, mcd, mcdx, sbpcd, jsflash, mtdblock_ro,
> pf, swim3, loop, aztcd, gscd, optcd, sjcd, sonycd, stram, rd, nbd, xpram,
> acorn floppy, swim_iop

make[2]: Entering directory `/usr/src/linux-2.5.38/drivers/block'
gcc ... -DKBUILD_BASENAME=floppy -c -o floppy.o floppy.c
floppy.c: In function `cleanup_module':
floppy.c:4565: `drive' undeclared (first use in this function)
floppy.c:4573: warning: statement with no effect


--- drivers/block/floppy.c~ 2002-09-22 11:16:52.000000000 +0200
+++ drivers/block/floppy.c 2002-09-22 12:51:22.000000000 +0200
@@ -4556,7 +4556,7 @@

void cleanup_module(void)
{
- int i;
+ int drive;

unregister_sys_device(&device_floppy);
devfs_unregister (devfs_handle);

BYtE
Philipp
--
/ / (_)__ __ ____ __ Philipp Hahn
/ /__/ / _ \/ // /\ \/ /
/____/_/_//_/\_,_/ /_/\_\ [email protected]

2002-09-22 13:04:41

by Adrian Bunk

[permalink] [raw]
Subject: Re: Linux 2.5.38

On Sat, 21 Sep 2002, Linus Torvalds wrote:

>...
> Alexander Viro <[email protected]>:
> o gendisk for pcd, cdu31a, cm206, mcd, mcdx, sbpcd, jsflash, mtdblock_ro,
> pf, swim3, loop, aztcd, gscd, optcd, sjcd, sonycd, stram, rd, nbd, xpram,
> acorn floppy, swim_iop
>...


Below are the trivial fixes for some typos introduced by these changes:

- missing comma in cdu31a
- missing semicolon in cdu31a
- comma instead of colon in gscd
- semicolon instead of comma in mcd
- missing closing bracket in sonycd535

cu
Adrian


--- linux-2.5.38-full/drivers/cdrom/cdu31a.c.old 2002-09-22 14:31:17.000000000 +0200
+++ linux-2.5.38-full/drivers/cdrom/cdu31a.c 2002-09-22 14:50:40.000000000 +0200
@@ -3193,10 +3193,10 @@
.major = MAJOR_NR,
.first_minor = 0,
.minor_shift = 0,
- .major_name = "cdu31a"
+ .major_name = "cdu31a",
.fops = &scd_bdops,
.flags = GENHD_FL_CD,
-}
+};

/* The different types of disc loading mechanisms supported */
static char *load_mech[] __initdata =
--- linux-2.5.38-full/drivers/cdrom/gscd.c.old 2002-09-22 14:53:47.000000000 +0200
+++ linux-2.5.38-full/drivers/cdrom/gscd.c 2002-09-22 14:55:48.000000000 +0200
@@ -901,7 +901,7 @@
static struct gendisk gscd_disk = {
.major = MAJOR_NR,
.first_minor = 0,
- ,minor_shift = 0,
+ .minor_shift = 0,
.fops = &gscd_fops,
.major_name = "gscd"
};
--- linux-2.5.38-full/drivers/cdrom/mcd.c.old 2002-09-22 14:58:25.000000000 +0200
+++ linux-2.5.38-full/drivers/cdrom/mcd.c 2002-09-22 14:59:35.000000000 +0200
@@ -227,7 +227,7 @@
.minor_shift = 0,
.major_name = "mcd",
.fops = &mcd_bdops,
- .flags = GENHD_FL_CD;
+ .flags = GENHD_FL_CD,
};

#ifndef MODULE
--- linux-2.5.38-full/drivers/cdrom/sonycd535.c.old 2002-09-22 15:03:13.000000000 +0200
+++ linux-2.5.38-full/drivers/cdrom/sonycd535.c 2002-09-22 15:04:27.000000000 +0200
@@ -1461,7 +1461,8 @@
.first_minor = 0,
.minor_shift = 0,
.fops = &cdu_fops,
- .major_name = "cdu"
+ .major_name = "cdu",
+};

/*
* Initialize the driver.




2002-09-22 13:16:32

by Alexander Viro

[permalink] [raw]
Subject: Re: Linux 2.5.38



On Sun, 22 Sep 2002, Adrian Bunk wrote:

> On Sat, 21 Sep 2002, Linus Torvalds wrote:
>
> >...
> > Alexander Viro <[email protected]>:
> > o gendisk for pcd, cdu31a, cm206, mcd, mcdx, sbpcd, jsflash, mtdblock_ro,
> > pf, swim3, loop, aztcd, gscd, optcd, sjcd, sonycd, stram, rd, nbd, xpram,
> > acorn floppy, swim_iop
> >...
>
>
> Below are the trivial fixes for some typos introduced by these changes:
[snip]

Thanks. Other fixes: typos in partitions/check.c, block/floppy.c and
acorn/block/fd1772.c + replacement of #define with inline in block/floppy.c
(fd_eject()).

diff -urN C38-0/fs/partitions/check.c C38-fix/fs/partitions/check.c
--- C38-0/fs/partitions/check.c Sun Sep 22 01:08:03 2002
+++ C38-fix/fs/partitions/check.c Sun Sep 22 04:02:19 2002
@@ -362,7 +362,7 @@
pos = devfs_generate_path(dev->disk_de, rname+3, sizeof(rname)-3);
if (pos >= 0) {
strncpy(rname + pos, "../", 3);
- devfs_mk_symlink(devfs_handle, vname,
+ devfs_mk_symlink(cdroms, vname,
DEVFS_FL_DEFAULT,
rname + pos, &slave, NULL);
devfs_auto_unregister(dev->de, slave);
diff -urN C38-tapeblock/drivers/block/floppy.c C38-current/drivers/block/floppy.c
--- C38-tapeblock/drivers/block/floppy.c Sun Sep 22 01:08:02 2002
+++ C38-current/drivers/block/floppy.c Sun Sep 22 06:38:34 2002
@@ -600,7 +600,10 @@
* expressed in units of 512 bytes */

#ifndef fd_eject
-#define fd_eject(x) -EINVAL
+static inline int fd_eject(int drive)
+{
+ return -EINVAL;
+}
#endif

#ifdef DEBUGT
@@ -4556,7 +4559,7 @@

void cleanup_module(void)
{
- int i;
+ int drive;

unregister_sys_device(&device_floppy);
devfs_unregister (devfs_handle);
diff -urN C38-pd_cleanup/drivers/acorn/block/fd1772.c C38-acorn_fix/drivers/acorn/block/fd1772.c
--- C38-pd_cleanup/drivers/acorn/block/fd1772.c Sun Sep 22 01:08:02 2002
+++ C38-acorn_fix/drivers/acorn/block/fd1772.c Sun Sep 22 08:45:24 2002
@@ -1542,7 +1542,7 @@
static struct gendisk *floppy_find(int minor)
{
int drive = minor & 3;
- if ((minor>> 2) > NUM_DISK_TYPES || minor >= FD_MAX_UNITS)
+ if ((minor>> 2) > NUM_DISK_TYPES || drive >= FD_MAX_UNITS)
return NULL;
return &disks[drive];
}

2002-09-22 19:57:33

by Jochen Friedrich

[permalink] [raw]
Subject: Re: Linux 2.5.38

Hi,

build fails on Alpha:

make[2]: Entering directory `/home/src/linux-2.5.38/fs/partitions'
gcc -Wp,-MD,./.check.o.d -D__KERNEL__ -I/home/src/linux-2.5.38/include
-Wall -Wstrict-prototypes -Wno-trigraphs -O2 -fomit-frame-pointer
-fno-strict-aliasing -fno-common -pipe -mno-fp-regs -ffixed-8 -mcpu=ev5
-Wa,-mev6 -nostdinc -iwithprefix include -DKBUILD_BASENAME=check -c
-o check.o check.c
check.c: In function `devfs_create_cdrom':
check.c:365: `devfs_handle' undeclared (first use in this function)
check.c:365: (Each undeclared identifier is reported only once
check.c:365: for each function it appears in.)
check.c:344: warning: unused variable `symlink'
check.c:344: warning: unused variable `dirname'
check.c:343: warning: unused variable `devfs_flags'
check.c:342: warning: unused variable `slave'
check.c:342: warning: unused variable `dir'
check.c:341: warning: unused variable `pos'
make[2]: *** [check.o] Error 1
make[2]: Leaving directory `/home/src/linux-2.5.38/fs/partitions'
make[1]: *** [partitions] Error 2
make[1]: Leaving directory `/home/src/linux-2.5.38/fs'
make: *** [fs] Error 2


#
# Automatically generated make config: don't edit
#
CONFIG_ALPHA=y
# CONFIG_UID16 is not set
# CONFIG_RWSEM_GENERIC_SPINLOCK is not set
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_GENERIC_ISA_DMA=y

#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y

#
# General setup
#
CONFIG_NET=y
CONFIG_SYSVIPC=y
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y

#
# Loadable module support
#
CONFIG_MODULES=y
CONFIG_MODVERSIONS=y
CONFIG_KMOD=y

#
# System setup
#
CONFIG_ALPHA_GENERIC=y
# CONFIG_ALPHA_ALCOR is not set
# CONFIG_ALPHA_XL is not set
# CONFIG_ALPHA_BOOK1 is not set
# CONFIG_ALPHA_AVANTI is not set
# CONFIG_ALPHA_CABRIOLET is not set
# CONFIG_ALPHA_DP264 is not set
# CONFIG_ALPHA_EB164 is not set
# CONFIG_ALPHA_EB64P is not set
# CONFIG_ALPHA_EB66 is not set
# CONFIG_ALPHA_EB66P is not set
# CONFIG_ALPHA_EIGER is not set
# CONFIG_ALPHA_JENSEN is not set
# CONFIG_ALPHA_LX164 is not set
# CONFIG_ALPHA_MIATA is not set
# CONFIG_ALPHA_MIKASA is not set
# CONFIG_ALPHA_NAUTILUS is not set
# CONFIG_ALPHA_NONAME is not set
# CONFIG_ALPHA_NORITAKE is not set
# CONFIG_ALPHA_PC164 is not set
# CONFIG_ALPHA_P2K is not set
# CONFIG_ALPHA_RAWHIDE is not set
# CONFIG_ALPHA_RUFFIAN is not set
# CONFIG_ALPHA_RX164 is not set
# CONFIG_ALPHA_SX164 is not set
# CONFIG_ALPHA_SABLE is not set
# CONFIG_ALPHA_SHARK is not set
# CONFIG_ALPHA_TAKARA is not set
# CONFIG_ALPHA_TITAN is not set
# CONFIG_ALPHA_WILDFIRE is not set
CONFIG_ISA=y
CONFIG_EISA=y
# CONFIG_SBUS is not set
# CONFIG_MCA is not set
CONFIG_PCI=y
CONFIG_ALPHA_BROKEN_IRQ_MASK=y
# CONFIG_SMP is not set
# CONFIG_DISCONTIGMEM is not set
# CONFIG_ALPHA_LARGE_VMALLOC is not set
CONFIG_PCI_NAMES=y
CONFIG_HOTPLUG=y

#
# PCMCIA/CardBus support
#
# CONFIG_PCMCIA is not set
CONFIG_KCORE_ELF=y
# CONFIG_KCORE_AOUT is not set
CONFIG_SRM_ENV=m
CONFIG_BINFMT_AOUT=m
CONFIG_OSF4_COMPAT=y
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_MISC=m
CONFIG_BINFMT_EM86=m

#
# Parallel port support
#
CONFIG_PARPORT=m
CONFIG_PARPORT_PC=m
CONFIG_PARPORT_PC_CML1=m
# CONFIG_PARPORT_SERIAL is not set
CONFIG_PARPORT_PC_FIFO=y
CONFIG_PARPORT_PC_SUPERIO=y
# CONFIG_PARPORT_AMIGA is not set
# CONFIG_PARPORT_MFC3 is not set
# CONFIG_PARPORT_ATARI is not set
# CONFIG_PARPORT_GSC is not set
# CONFIG_PARPORT_SUNBPP is not set
# CONFIG_PARPORT_OTHER is not set
CONFIG_PARPORT_1284=y

#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set

#
# Plug and Play configuration
#
CONFIG_PNP=m
CONFIG_ISAPNP=m
# CONFIG_PNPBIOS is not set

#
# Block devices
#
CONFIG_BLK_DEV_FD=m
# CONFIG_BLK_DEV_XD is not set
# CONFIG_PARIDE is not set
CONFIG_BLK_CPQ_DA=m
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_CISS_SCSI_TAPE is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_NBD=m
CONFIG_BLK_DEV_RAM=m
CONFIG_BLK_DEV_RAM_SIZE=4096
# CONFIG_BLK_DEV_INITRD is not set

#
# Multi-device support (RAID and LVM)
#
CONFIG_MD=y
CONFIG_BLK_DEV_MD=m
CONFIG_MD_LINEAR=m
CONFIG_MD_RAID0=m
CONFIG_MD_RAID1=m
CONFIG_MD_RAID5=m
# CONFIG_MD_MULTIPATH is not set
CONFIG_BLK_DEV_LVM=m

#
# ATA/ATAPI/MFM/RLL support
#
# CONFIG_IDE is not set
# CONFIG_BLK_DEV_HD is not set

#
# SCSI support
#
CONFIG_SCSI=y

#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
CONFIG_SD_EXTRA_DEVS=40
CONFIG_CHR_DEV_ST=m
# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=m
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_SR_EXTRA_DEVS=2
CONFIG_CHR_DEV_SG=m

#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
CONFIG_SCSI_MULTI_LUN=y
# CONFIG_SCSI_REPORT_LUNS is not set
CONFIG_SCSI_CONSTANTS=y
# CONFIG_SCSI_LOGGING is not set

#
# SCSI low-level drivers
#
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_7000FASST is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AHA152X is not set
# CONFIG_SCSI_AHA1542 is not set
# CONFIG_SCSI_AHA1740 is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_IN2000 is not set
# CONFIG_SCSI_AM53C974 is not set
# CONFIG_SCSI_MEGARAID is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_CPQFCTS is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_DTC3280 is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_EATA_DMA is not set
# CONFIG_SCSI_EATA_PIO is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_GENERIC_NCR5380 is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
CONFIG_SCSI_PPA=m
CONFIG_SCSI_IMM=m
# CONFIG_SCSI_IZIP_EPP16 is not set
# CONFIG_SCSI_IZIP_SLOW_CTR is not set
# CONFIG_SCSI_NCR53C406A is not set
# CONFIG_SCSI_NCR53C7xx is not set
CONFIG_SCSI_SYM53C8XX_2=m
CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
# CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set
CONFIG_SCSI_NCR53C8XX=y
# CONFIG_SCSI_SYM53C8XX is not set
CONFIG_SCSI_NCR53C8XX_DEFAULT_TAGS=8
CONFIG_SCSI_NCR53C8XX_MAX_TAGS=32
CONFIG_SCSI_NCR53C8XX_SYNC=20
# CONFIG_SCSI_NCR53C8XX_PROFILE is not set
# CONFIG_SCSI_NCR53C8XX_IOMAPPED is not set
# CONFIG_SCSI_NCR53C8XX_SYMBIOS_COMPAT is not set
# CONFIG_SCSI_PAS16 is not set
# CONFIG_SCSI_PCI2000 is not set
# CONFIG_SCSI_PCI2220I is not set
# CONFIG_SCSI_PSI240I is not set
# CONFIG_SCSI_QLOGIC_FAS is not set
# CONFIG_SCSI_QLOGIC_ISP is not set
# CONFIG_SCSI_QLOGIC_FC is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_SIM710 is not set
# CONFIG_SCSI_SYM53C416 is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_T128 is not set
# CONFIG_SCSI_U14_34F is not set
# CONFIG_SCSI_DEBUG is not set

#
# Fusion MPT device support
#
# CONFIG_FUSION is not set
# CONFIG_FUSION_BOOT is not set
# CONFIG_FUSION_ISENSE is not set
# CONFIG_FUSION_CTL is not set
# CONFIG_FUSION_LAN is not set

#
# Networking options
#
CONFIG_PACKET=m
CONFIG_PACKET_MMAP=y
CONFIG_NETLINK_DEV=m
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
CONFIG_FILTER=y
CONFIG_UNIX=y
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_FWMARK=y
CONFIG_IP_ROUTE_NAT=y
CONFIG_IP_ROUTE_MULTIPATH=y
CONFIG_IP_ROUTE_TOS=y
CONFIG_IP_ROUTE_VERBOSE=y
CONFIG_IP_ROUTE_LARGE_TABLES=y
# CONFIG_IP_PNP is not set
CONFIG_NET_IPIP=m
CONFIG_NET_IPGRE=m
CONFIG_NET_IPGRE_BROADCAST=y
CONFIG_IP_MROUTE=y
CONFIG_IP_PIMSM_V1=y
CONFIG_IP_PIMSM_V2=y
CONFIG_ARPD=y
CONFIG_INET_ECN=y
CONFIG_SYN_COOKIES=y

#
# IP: Netfilter Configuration
#
CONFIG_IP_NF_CONNTRACK=m
CONFIG_IP_NF_FTP=m
CONFIG_IP_NF_IRC=m
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_LIMIT=m
CONFIG_IP_NF_MATCH_MAC=m
CONFIG_IP_NF_MATCH_PKTTYPE=m
CONFIG_IP_NF_MATCH_MARK=m
CONFIG_IP_NF_MATCH_MULTIPORT=m
CONFIG_IP_NF_MATCH_TOS=m
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_DSCP=m
CONFIG_IP_NF_MATCH_AH_ESP=m
CONFIG_IP_NF_MATCH_LENGTH=m
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_MATCH_TCPMSS=m
CONFIG_IP_NF_MATCH_HELPER=m
CONFIG_IP_NF_MATCH_STATE=m
CONFIG_IP_NF_MATCH_CONNTRACK=m
CONFIG_IP_NF_MATCH_UNCLEAN=m
CONFIG_IP_NF_MATCH_OWNER=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_MIRROR=m
CONFIG_IP_NF_NAT=m
CONFIG_IP_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_REDIRECT=m
# CONFIG_IP_NF_NAT_LOCAL is not set
CONFIG_IP_NF_NAT_SNMP_BASIC=m
CONFIG_IP_NF_NAT_IRC=m
CONFIG_IP_NF_NAT_FTP=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_TOS=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_DSCP=m
CONFIG_IP_NF_TARGET_MARK=m
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_IP_NF_TARGET_TCPMSS=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_COMPAT_IPCHAINS=m
CONFIG_IP_NF_NAT_NEEDED=y
CONFIG_IP_NF_COMPAT_IPFWADM=m
CONFIG_IP_NF_NAT_NEEDED=y
CONFIG_IPV6=m

#
# IPv6: Netfilter Configuration
#
CONFIG_IP6_NF_QUEUE=m
CONFIG_IP6_NF_IPTABLES=m
CONFIG_IP6_NF_MATCH_LIMIT=m
CONFIG_IP6_NF_MATCH_MAC=m
CONFIG_IP6_NF_MATCH_MULTIPORT=m
CONFIG_IP6_NF_MATCH_OWNER=m
CONFIG_IP6_NF_MATCH_MARK=m
CONFIG_IP6_NF_MATCH_LENGTH=m
CONFIG_IP6_NF_MATCH_EUI64=m
CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_LOG=m
CONFIG_IP6_NF_MANGLE=m
CONFIG_IP6_NF_TARGET_MARK=m

#
# SCTP Configuration (EXPERIMENTAL)
#
CONFIG_IPV6_SCTP__=m
CONFIG_IP_SCTP=m
# CONFIG_SCTP_ADLER32 is not set
# CONFIG_SCTP_DBG_MSG is not set
# CONFIG_SCTP_DBG_OBJCNT is not set
CONFIG_ATM=y
CONFIG_ATM_CLIP=y
CONFIG_ATM_CLIP_NO_ICMP=y
CONFIG_ATM_LANE=m
CONFIG_ATM_MPOA=m
CONFIG_VLAN_8021Q=m
CONFIG_LLC=y
CONFIG_LLC_UI=m
CONFIG_IPX=m
CONFIG_IPX_INTERN=y
CONFIG_ATALK=m
# CONFIG_DEV_APPLETALK is not set
CONFIG_DECNET=m
CONFIG_DECNET_SIOCGIFCONF=y
CONFIG_DECNET_ROUTER=y
CONFIG_DECNET_ROUTE_FWMARK=y
CONFIG_BRIDGE=m
CONFIG_BRIDGE_NF_EBTABLES=m
CONFIG_BRIDGE_EBT_T_FILTER=m
CONFIG_BRIDGE_EBT_T_NAT=m
CONFIG_BRIDGE_EBT_BROUTE=m
CONFIG_BRIDGE_EBT_LOG=m
CONFIG_BRIDGE_EBT_IPF=m
CONFIG_BRIDGE_EBT_ARPF=m
CONFIG_BRIDGE_EBT_VLANF=m
CONFIG_BRIDGE_EBT_MARKF=m
CONFIG_BRIDGE_EBT_SNAT=m
CONFIG_BRIDGE_EBT_DNAT=m
CONFIG_BRIDGE_EBT_REDIRECT=m
CONFIG_BRIDGE_EBT_MARK_T=m
CONFIG_X25=m
CONFIG_LAPB=m
# CONFIG_NET_DIVERT is not set
CONFIG_ECONET=m
CONFIG_ECONET_AUNUDP=y
CONFIG_ECONET_NATIVE=y
CONFIG_WAN_ROUTER=m
# CONFIG_NET_FASTROUTE is not set
# CONFIG_NET_HW_FLOWCONTROL is not set

#
# QoS and/or fair queueing
#
CONFIG_NET_SCHED=y
CONFIG_NET_SCH_CBQ=m
CONFIG_NET_SCH_HTB=m
CONFIG_NET_SCH_CSZ=m
CONFIG_NET_SCH_ATM=y
CONFIG_NET_SCH_PRIO=m
CONFIG_NET_SCH_RED=m
CONFIG_NET_SCH_SFQ=m
CONFIG_NET_SCH_TEQL=m
CONFIG_NET_SCH_TBF=m
CONFIG_NET_SCH_GRED=m
CONFIG_NET_SCH_DSMARK=m
CONFIG_NET_SCH_INGRESS=m
CONFIG_NET_QOS=y
CONFIG_NET_ESTIMATOR=y
CONFIG_NET_CLS=y
CONFIG_NET_CLS_TCINDEX=m
CONFIG_NET_CLS_ROUTE4=m
CONFIG_NET_CLS_ROUTE=y
CONFIG_NET_CLS_FW=m
CONFIG_NET_CLS_U32=m
CONFIG_NET_CLS_RSVP=m
CONFIG_NET_CLS_RSVP6=m
CONFIG_NET_CLS_POLICE=y

#
# Network device support
#
CONFIG_NETDEVICES=y

#
# ARCnet devices
#
# CONFIG_ARCNET is not set
CONFIG_DUMMY=m
CONFIG_BONDING=m
CONFIG_EQUALIZER=m
CONFIG_TUN=m
CONFIG_ETHERTAP=m
# CONFIG_NET_SB1000 is not set

#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
# CONFIG_SUNLANCE is not set
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNBMAC is not set
# CONFIG_SUNQE is not set
# CONFIG_SUNGEM is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_LANCE is not set
# CONFIG_NET_VENDOR_SMC is not set
# CONFIG_NET_VENDOR_RACAL is not set
# CONFIG_AT1700 is not set
# CONFIG_DEPCA is not set
# CONFIG_HP100 is not set
# CONFIG_NET_ISA is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_AC3200 is not set
# CONFIG_APRICOT is not set
# CONFIG_CS89x0 is not set
# CONFIG_DGRS is not set
# CONFIG_EEPRO100 is not set
# CONFIG_E100 is not set
# CONFIG_LNE390 is not set
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
# CONFIG_NE2K_PCI is not set
# CONFIG_NE3210 is not set
# CONFIG_ES3210 is not set
# CONFIG_8139CP is not set
# CONFIG_8139TOO is not set
# CONFIG_8139TOO_PIO is not set
# CONFIG_8139TOO_TUNE_TWISTER is not set
# CONFIG_8139TOO_8129 is not set
# CONFIG_8139_OLD_RX_RESET is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_SUNDANCE_MMIO is not set
# CONFIG_TLAN is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_VIA_RHINE_MMIO is not set
# CONFIG_NET_POCKET is not set

#
# Ethernet (1000 Mbit)
#
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_E1000_NAPI is not set
# CONFIG_MYRI_SBUS is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_SK98LIN is not set
# CONFIG_TIGON3 is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
CONFIG_PLIP=m
CONFIG_PPP=m
CONFIG_PPP_MULTILINK=y
# CONFIG_PPP_FILTER is not set
CONFIG_PPP_ASYNC=m
CONFIG_PPP_SYNC_TTY=m
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_BSDCOMP=m
CONFIG_PPPOE=m
CONFIG_PPPOATM=m
CONFIG_SLIP=m
CONFIG_SLIP_COMPRESSED=y
CONFIG_SLIP_SMART=y
CONFIG_SLIP_MODE_SLIP6=y

#
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set

#
# Token Ring devices
#
CONFIG_TR=y
CONFIG_IBMTR=m
CONFIG_IBMOL=m
CONFIG_IBMLS=m
CONFIG_3C359=m
CONFIG_TMS380TR=m
CONFIG_TMSPCI=m
CONFIG_TMSISA=m
CONFIG_ABYSS=m
# CONFIG_MADGEMC is not set
# CONFIG_SMCTR is not set
# CONFIG_NET_FC is not set
# CONFIG_RCPCI is not set
# CONFIG_SHAPER is not set

#
# Wan interfaces
#
CONFIG_WAN=y
# CONFIG_HOSTESS_SV11 is not set
# CONFIG_COSA is not set
# CONFIG_COMX is not set
# CONFIG_DSCC4 is not set
# CONFIG_LANMEDIA is not set
# CONFIG_SEALEVEL_4021 is not set
# CONFIG_SYNCLINK_SYNCPPP is not set
CONFIG_HDLC=m
CONFIG_HDLC_RAW=y
CONFIG_HDLC_CISCO=y
# CONFIG_HDLC_FR is not set
CONFIG_HDLC_PPP=y
CONFIG_HDLC_X25=y
CONFIG_PC300=m
# CONFIG_PC300_MLPPP is not set
CONFIG_N2=m
CONFIG_C101=m
# CONFIG_FARSYNC is not set
# CONFIG_HDLC_DEBUG_PKT is not set
# CONFIG_HDLC_DEBUG_HARD_HEADER is not set
# CONFIG_HDLC_DEBUG_ECN is not set
# CONFIG_HDLC_DEBUG_RINGS is not set
# CONFIG_DLCI is not set
# CONFIG_WAN_ROUTER_DRIVERS is not set
CONFIG_LAPBETHER=m
CONFIG_X25_ASY=m

#
# Tulip family network device support
#
CONFIG_NET_TULIP=y
CONFIG_DE2104X=m
CONFIG_TULIP=m
# CONFIG_TULIP_MWI is not set
# CONFIG_TULIP_MMIO is not set
CONFIG_DE4X5=m
# CONFIG_WINBOND_840 is not set
# CONFIG_DM9102 is not set

#
# ATM drivers
#
CONFIG_ATM_TCP=m
# CONFIG_ATM_LANAI is not set
# CONFIG_ATM_ENI is not set
# CONFIG_ATM_FIRESTREAM is not set
# CONFIG_ATM_ZATM is not set
# CONFIG_ATM_NICSTAR is not set
# CONFIG_ATM_IDT77252 is not set
# CONFIG_ATM_AMBASSADOR is not set
# CONFIG_ATM_HORIZON is not set
# CONFIG_ATM_IA is not set
# CONFIG_ATM_FORE200E_MAYBE is not set

#
# Amateur Radio support
#
# CONFIG_HAMRADIO is not set

#
# ISDN subsystem
#
CONFIG_ISDN_BOOL=y

#
# Old ISDN4Linux
#
CONFIG_ISDN=m
CONFIG_ISDN_PPP=y
CONFIG_ISDN_PPP_VJ=y
CONFIG_ISDN_MPP=y
CONFIG_ISDN_PPP_BSDCOMP=m
CONFIG_ISDN_AUDIO=y
CONFIG_ISDN_TTY_FAX=y
CONFIG_ISDN_X25=y

#
# ISDN feature submodules
#
CONFIG_ISDN_DRV_LOOP=m
CONFIG_ISDN_DIVERSION=m

#
# CAPI subsystem
#
CONFIG_ISDN_CAPI=m
CONFIG_ISDN_DRV_AVMB1_VERBOSE_REASON=y
CONFIG_ISDN_CAPI_MIDDLEWARE=y
CONFIG_ISDN_CAPI_CAPI20=m
CONFIG_ISDN_CAPI_CAPIFS_BOOL=y
CONFIG_ISDN_CAPI_CAPIFS=m
CONFIG_ISDN_CAPI_CAPIDRV=m

#
# CAPI hardware drivers
#

#
# Active AVM cards
#
CONFIG_CAPI_AVM=y
# CONFIG_ISDN_DRV_AVMB1_B1ISA is not set
CONFIG_ISDN_DRV_AVMB1_B1PCI=m
# CONFIG_ISDN_DRV_AVMB1_B1PCIV4 is not set
# CONFIG_ISDN_DRV_AVMB1_T1ISA is not set
# CONFIG_ISDN_DRV_AVMB1_B1PCMCIA is not set
# CONFIG_ISDN_DRV_AVMB1_AVM_CS is not set
# CONFIG_ISDN_DRV_AVMB1_T1PCI is not set
# CONFIG_ISDN_DRV_AVMB1_C4 is not set

#
# ISDN4Linux hardware drivers
#

#
# Passive cards
#
CONFIG_ISDN_DRV_HISAX=m

#
# D-channel protocol features
#
CONFIG_HISAX_EURO=y
CONFIG_DE_AOC=y
# CONFIG_HISAX_NO_SENDCOMPLETE is not set
# CONFIG_HISAX_NO_LLC is not set
# CONFIG_HISAX_NO_KEYPAD is not set
# CONFIG_HISAX_1TR6 is not set
# CONFIG_HISAX_NI1 is not set
CONFIG_HISAX_MAX_CARDS=8

#
# HiSax supported cards
#
# CONFIG_HISAX_16_0 is not set
# CONFIG_HISAX_16_3 is not set
# CONFIG_HISAX_TELESPCI is not set
# CONFIG_HISAX_S0BOX is not set
CONFIG_HISAX_AVM_A1=y
# CONFIG_HISAX_FRITZPCI is not set
# CONFIG_HISAX_AVM_A1_PCMCIA is not set
# CONFIG_HISAX_ELSA is not set
# CONFIG_HISAX_IX1MICROR2 is not set
# CONFIG_HISAX_DIEHLDIVA is not set
# CONFIG_HISAX_ASUSCOM is not set
# CONFIG_HISAX_TELEINT is not set
# CONFIG_HISAX_HFCS is not set
# CONFIG_HISAX_SEDLBAUER is not set
# CONFIG_HISAX_SPORTSTER is not set
# CONFIG_HISAX_MIC is not set
# CONFIG_HISAX_NETJET is not set
# CONFIG_HISAX_NETJET_U is not set
# CONFIG_HISAX_NICCY is not set
# CONFIG_HISAX_ISURF is not set
# CONFIG_HISAX_HSTSAPHIR is not set
# CONFIG_HISAX_BKM_A4T is not set
# CONFIG_HISAX_SCT_QUADRO is not set
# CONFIG_HISAX_GAZEL is not set
# CONFIG_HISAX_HFC_PCI is not set
# CONFIG_HISAX_W6692 is not set
# CONFIG_HISAX_HFC_SX is not set
# CONFIG_HISAX_ENTERNOW_PCI is not set
# CONFIG_HISAX_DEBUG is not set
# CONFIG_HISAX_SEDLBAUER_CS is not set
# CONFIG_HISAX_ELSA_CS is not set
# CONFIG_HISAX_AVM_A1_CS is not set
# CONFIG_HISAX_ST5481 is not set
# CONFIG_HISAX_FRITZ_PCIPNP is not set
CONFIG_HISAX_FRITZ_CLASSIC=m
# CONFIG_HISAX_HFCPCI is not set

#
# Active cards
#
# CONFIG_ISDN_DRV_ICN is not set
# CONFIG_ISDN_DRV_PCBIT is not set
# CONFIG_ISDN_DRV_SC is not set
# CONFIG_ISDN_DRV_ACT2000 is not set
# CONFIG_ISDN_DRV_EICON is not set
# CONFIG_ISDN_DRV_TPAM is not set
# CONFIG_HYSDN is not set
# CONFIG_HYSDN_CAPI is not set

#
# Old CD-ROM drivers (not SCSI, not IDE)
#
# CONFIG_CD_NO_IDESCSI is not set

#
# Input device support
#
CONFIG_INPUT=y

#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=m
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_TSDEV is not set
CONFIG_INPUT_EVDEV=m
# CONFIG_INPUT_EVBUG is not set

#
# Input I/O drivers
#
# CONFIG_GAMEPORT is not set
CONFIG_SOUND_GAMEPORT=y
# CONFIG_GAMEPORT_NS558 is not set
# CONFIG_GAMEPORT_L4 is not set
# CONFIG_GAMEPORT_EMU10K1 is not set
# CONFIG_GAMEPORT_VORTEX is not set
# CONFIG_GAMEPORT_FM801 is not set
# CONFIG_GAMEPORT_CS461x is not set
CONFIG_SERIO=m
CONFIG_SERIO_I8042=m
CONFIG_SERIO_SERPORT=m
CONFIG_SERIO_CT82C710=m
CONFIG_SERIO_PARKBD=m

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=m
CONFIG_KEYBOARD_SUNKBD=m
CONFIG_KEYBOARD_XTKBD=m
CONFIG_KEYBOARD_NEWTON=m
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=m
CONFIG_MOUSE_SERIAL=m
CONFIG_MOUSE_INPORT=m
# CONFIG_MOUSE_ATIXL is not set
CONFIG_MOUSE_LOGIBM=m
CONFIG_MOUSE_PC110PAD=m
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_JOYSTICK_ANALOG is not set
# CONFIG_JOYSTICK_A3D is not set
# CONFIG_JOYSTICK_ADI is not set
# CONFIG_JOYSTICK_COBRA is not set
# CONFIG_JOYSTICK_GF2K is not set
# CONFIG_JOYSTICK_GRIP is not set
# CONFIG_JOYSTICK_GRIP_MP is not set
# CONFIG_JOYSTICK_GUILLEMOT is not set
# CONFIG_JOYSTICK_INTERACT is not set
# CONFIG_JOYSTICK_SIDEWINDER is not set
# CONFIG_JOYSTICK_TMDC is not set
# CONFIG_JOYSTICK_IFORCE is not set
# CONFIG_JOYSTICK_WARRIOR is not set
# CONFIG_JOYSTICK_MAGELLAN is not set
# CONFIG_JOYSTICK_SPACEORB is not set
# CONFIG_JOYSTICK_SPACEBALL is not set
# CONFIG_JOYSTICK_STINGER is not set
# CONFIG_JOYSTICK_TWIDDLER is not set
# CONFIG_JOYSTICK_DB9 is not set
# CONFIG_JOYSTICK_GAMECON is not set
# CONFIG_JOYSTICK_TURBOGRAFX is not set
# CONFIG_INPUT_JOYDUMP is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_TOUCHSCREEN_GUNZE is not set
CONFIG_INPUT_MISC=y
# CONFIG_INPUT_PCSPKR is not set
# CONFIG_INPUT_UINPUT is not set

#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_SERIAL_NONSTANDARD is not set

#
# Serial drivers
#
CONFIG_SERIAL_8250=m
# CONFIG_SERIAL_8250_CONSOLE is not set
# CONFIG_SERIAL_8250_CS is not set
CONFIG_SERIAL_8250_EXTENDED=y
# CONFIG_SERIAL_8250_MANY_PORTS is not set
CONFIG_SERIAL_8250_SHARE_IRQ=y
# CONFIG_SERIAL_8250_DETECT_IRQ is not set
# CONFIG_SERIAL_8250_MULTIPORT is not set
# CONFIG_SERIAL_8250_RSA is not set

#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=m
CONFIG_UNIX98_PTYS=y
CONFIG_UNIX98_PTY_COUNT=256
CONFIG_PRINTER=m
# CONFIG_LP_CONSOLE is not set
# CONFIG_PPDEV is not set

#
# I2C support
#
# CONFIG_I2C is not set

#
# Mice
#
# CONFIG_BUSMOUSE is not set
# CONFIG_QIC02_TAPE is not set

#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
# CONFIG_NVRAM is not set
# CONFIG_RTC is not set
CONFIG_GEN_RTC=m
CONFIG_GEN_RTC_X=y
# CONFIG_DTLK is not set
CONFIG_R3964=m
CONFIG_APPLICOM=m

#
# Ftape, the floppy tape device driver
#
# CONFIG_FTAPE is not set
# CONFIG_AGP is not set
# CONFIG_DRM is not set
CONFIG_RAW_DRIVER=m

#
# Multimedia devices
#
CONFIG_VIDEO_DEV=m

#
# Video For Linux
#
# CONFIG_VIDEO_PROC_FS is not set

#
# Video Adapters
#
# CONFIG_VIDEO_PMS is not set
# CONFIG_VIDEO_BWQCAM is not set
# CONFIG_VIDEO_CQCAM is not set
# CONFIG_VIDEO_W9966 is not set
# CONFIG_VIDEO_CPIA is not set
# CONFIG_VIDEO_SAA5249 is not set
# CONFIG_TUNER_3036 is not set
# CONFIG_VIDEO_STRADIS is not set
# CONFIG_VIDEO_ZORAN is not set
# CONFIG_VIDEO_ZORAN_BUZ is not set
# CONFIG_VIDEO_ZORAN_DC10 is not set
# CONFIG_VIDEO_ZORAN_LML33 is not set
# CONFIG_VIDEO_ZR36120 is not set
# CONFIG_VIDEO_MEYE is not set

#
# Radio Adapters
#
# CONFIG_RADIO_CADET is not set
# CONFIG_RADIO_RTRACK is not set
# CONFIG_RADIO_RTRACK2 is not set
# CONFIG_RADIO_AZTECH is not set
# CONFIG_RADIO_GEMTEK is not set
# CONFIG_RADIO_GEMTEK_PCI is not set
# CONFIG_RADIO_MAXIRADIO is not set
# CONFIG_RADIO_MAESTRO is not set
# CONFIG_RADIO_MIROPCM20 is not set
# CONFIG_RADIO_MIROPCM20_RDS is not set
# CONFIG_RADIO_SF16FMI is not set
# CONFIG_RADIO_TERRATEC is not set
# CONFIG_RADIO_TRUST is not set
# CONFIG_RADIO_TYPHOON is not set
# CONFIG_RADIO_ZOLTRIX is not set

#
# File systems
#
# CONFIG_QUOTA is not set
# CONFIG_QFMT_V1 is not set
# CONFIG_QFMT_V2 is not set
CONFIG_AUTOFS_FS=m
CONFIG_AUTOFS4_FS=m
CONFIG_REISERFS_FS=m
# CONFIG_REISERFS_CHECK is not set
# CONFIG_REISERFS_PROC_INFO is not set
CONFIG_ADFS_FS=m
# CONFIG_ADFS_FS_RW is not set
CONFIG_AFFS_FS=m
CONFIG_HFS_FS=m
CONFIG_BFS_FS=m
CONFIG_EXT3_FS=y
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
# CONFIG_UMSDOS_FS is not set
CONFIG_VFAT_FS=m
CONFIG_EFS_FS=m
# CONFIG_JFFS_FS is not set
# CONFIG_JFFS2_FS is not set
CONFIG_CRAMFS=m
CONFIG_TMPFS=y
CONFIG_RAMFS=y
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
# CONFIG_ZISOFS is not set
CONFIG_JFS_FS=m
# CONFIG_JFS_DEBUG is not set
# CONFIG_JFS_STATISTICS is not set
CONFIG_MINIX_FS=m
CONFIG_VXFS_FS=m
CONFIG_NTFS_FS=m
# CONFIG_NTFS_DEBUG is not set
# CONFIG_NTFS_RW is not set
CONFIG_HPFS_FS=m
CONFIG_PROC_FS=y
CONFIG_DEVFS_FS=y
CONFIG_DEVFS_MOUNT=y
# CONFIG_DEVFS_DEBUG is not set
CONFIG_DEVPTS_FS=y
CONFIG_QNX4FS_FS=m
# CONFIG_QNX4FS_RW is not set
CONFIG_ROMFS_FS=m
CONFIG_EXT2_FS=y
CONFIG_SYSV_FS=m
CONFIG_UDF_FS=m
# CONFIG_UDF_RW is not set
CONFIG_UFS_FS=m
# CONFIG_UFS_FS_WRITE is not set
CONFIG_XFS_FS=m
# CONFIG_XFS_RT is not set
# CONFIG_XFS_QUOTA is not set

#
# Network File Systems
#
CONFIG_CODA_FS=m
# CONFIG_INTERMEZZO_FS is not set
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
# CONFIG_ROOT_NFS is not set
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
# CONFIG_NFSD_TCP is not set
CONFIG_SUNRPC=m
CONFIG_LOCKD=m
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
CONFIG_SMB_FS=m
# CONFIG_SMB_NLS_DEFAULT is not set
CONFIG_NCP_FS=m
CONFIG_NCPFS_PACKET_SIGNING=y
CONFIG_NCPFS_IOCTL_LOCKING=y
CONFIG_NCPFS_STRONG=y
CONFIG_NCPFS_NFS_NS=y
CONFIG_NCPFS_OS2_NS=y
CONFIG_NCPFS_SMALLDOS=y
CONFIG_NCPFS_NLS=y
CONFIG_NCPFS_EXTRAS=y
# CONFIG_ZISOFS_FS is not set

#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
CONFIG_ACORN_PARTITION=y
CONFIG_ACORN_PARTITION_ICS=y
CONFIG_ACORN_PARTITION_ADFS=y
CONFIG_ACORN_PARTITION_POWERTEC=y
CONFIG_ACORN_PARTITION_RISCIX=y
CONFIG_OSF_PARTITION=y
CONFIG_AMIGA_PARTITION=y
CONFIG_ATARI_PARTITION=y
CONFIG_MAC_PARTITION=y
CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
# CONFIG_MINIX_SUBPARTITION is not set
CONFIG_SOLARIS_X86_PARTITION=y
CONFIG_UNIXWARE_DISKLABEL=y
# CONFIG_LDM_PARTITION is not set
CONFIG_SGI_PARTITION=y
# CONFIG_ULTRIX_PARTITION is not set
CONFIG_SUN_PARTITION=y
# CONFIG_EFI_PARTITION is not set
CONFIG_SMB_NLS=y
CONFIG_NLS=y

#
# Native Language Support
#
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=m
CONFIG_NLS_CODEPAGE_737=m
CONFIG_NLS_CODEPAGE_775=m
CONFIG_NLS_CODEPAGE_850=m
CONFIG_NLS_CODEPAGE_852=m
CONFIG_NLS_CODEPAGE_855=m
CONFIG_NLS_CODEPAGE_857=m
CONFIG_NLS_CODEPAGE_860=m
CONFIG_NLS_CODEPAGE_861=m
CONFIG_NLS_CODEPAGE_862=m
CONFIG_NLS_CODEPAGE_863=m
CONFIG_NLS_CODEPAGE_864=m
CONFIG_NLS_CODEPAGE_865=m
CONFIG_NLS_CODEPAGE_866=m
CONFIG_NLS_CODEPAGE_869=m
CONFIG_NLS_CODEPAGE_936=m
CONFIG_NLS_CODEPAGE_950=m
CONFIG_NLS_CODEPAGE_932=m
CONFIG_NLS_CODEPAGE_949=m
CONFIG_NLS_CODEPAGE_874=m
CONFIG_NLS_ISO8859_8=m
CONFIG_NLS_CODEPAGE_1250=m
CONFIG_NLS_CODEPAGE_1251=m
CONFIG_NLS_ISO8859_1=m
CONFIG_NLS_ISO8859_2=m
CONFIG_NLS_ISO8859_3=m
CONFIG_NLS_ISO8859_4=m
CONFIG_NLS_ISO8859_5=m
CONFIG_NLS_ISO8859_6=m
CONFIG_NLS_ISO8859_7=m
CONFIG_NLS_ISO8859_9=m
CONFIG_NLS_ISO8859_13=m
CONFIG_NLS_ISO8859_14=m
CONFIG_NLS_ISO8859_15=m
CONFIG_NLS_KOI8_R=m
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_UTF8=m

#
# Console drivers
#
CONFIG_VGA_CONSOLE=y

#
# Frame-buffer support
#
CONFIG_FB=y
CONFIG_DUMMY_CONSOLE=y
# CONFIG_FB_CLGEN is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_TGA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_MATROX is not set
CONFIG_FB_ATY=y
CONFIG_FB_ATY_GX=y
CONFIG_FB_ATY_CT=y
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
CONFIG_FB_TRIDENT=m
CONFIG_FB_PM3=m
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FBCON_ADVANCED is not set
CONFIG_FBCON_CFB8=m
CONFIG_FBCON_CFB16=m
CONFIG_FBCON_CFB24=y
CONFIG_FBCON_CFB32=m
CONFIG_FBCON_ACCEL=y
# CONFIG_FBCON_FONTWIDTH8_ONLY is not set
CONFIG_FBCON_FONTS=y
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
CONFIG_FONT_SUN8x16=y
CONFIG_FONT_SUN12x22=y
# CONFIG_FONT_6x11 is not set
# CONFIG_FONT_PEARL_8x8 is not set
# CONFIG_FONT_ACORN_8x8 is not set
CONFIG_PCI_CONSOLE=y

#
# Sound
#
CONFIG_SOUND=m

#
# Open Sound System
#
# CONFIG_SOUND_PRIME is not set

#
# Advanced Linux Sound Architecture
#
CONFIG_SND=m
CONFIG_SND_SEQUENCER=m
CONFIG_SND_SEQ_DUMMY=m
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
CONFIG_SND_SEQUENCER_OSS=y
# CONFIG_SND_RTCTIMER is not set
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
# CONFIG_SND_DEBUG_MEMORY is not set
# CONFIG_SND_DEBUG_DETECT is not set

#
# Generic devices
#
CONFIG_SND_DUMMY=m
CONFIG_SND_VIRMIDI=m
# CONFIG_SND_MTPAV is not set
CONFIG_SND_SERIAL_U16550=m
CONFIG_SND_MPU401=m

#
# ISA devices
#
# CONFIG_SND_AD1816A is not set
# CONFIG_SND_AD1848 is not set
# CONFIG_SND_CS4231 is not set
# CONFIG_SND_CS4232 is not set
# CONFIG_SND_CS4236 is not set
# CONFIG_SND_ES968 is not set
# CONFIG_SND_ES1688 is not set
# CONFIG_SND_ES18XX is not set
# CONFIG_SND_GUSCLASSIC is not set
# CONFIG_SND_GUSEXTREME is not set
# CONFIG_SND_GUSMAX is not set
# CONFIG_SND_INTERWAVE is not set
# CONFIG_SND_INTERWAVE_STB is not set
# CONFIG_SND_OPTI92X_AD1848 is not set
# CONFIG_SND_OPTI92X_CS4231 is not set
# CONFIG_SND_OPTI93X is not set
# CONFIG_SND_SB8 is not set
# CONFIG_SND_SB16 is not set
# CONFIG_SND_SBAWE is not set
# CONFIG_SND_WAVEFRONT is not set
# CONFIG_SND_ALS100 is not set
# CONFIG_SND_AZT2320 is not set
# CONFIG_SND_CMI8330 is not set
# CONFIG_SND_DT0197H is not set
# CONFIG_SND_OPL3SA2 is not set
# CONFIG_SND_SGALAXY is not set

#
# PCI devices
#
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_YMFPCI is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_CMIPCI is not set
CONFIG_SND_ENS1370=m
CONFIG_SND_ENS1371=m
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_FM801 is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_INTEL8X0 is not set
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_VIA686 is not set
# CONFIG_SND_VIA8233 is not set

#
# USB support
#
CONFIG_USB=m
CONFIG_USB_DEBUG=y

#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_LONG_TIMEOUT is not set
# CONFIG_USB_BANDWIDTH is not set
# CONFIG_USB_DYNAMIC_MINORS is not set

#
# USB Host Controller Drivers
#
# CONFIG_USB_EHCI_HCD is not set
CONFIG_USB_OHCI_HCD=m
# CONFIG_USB_UHCI_HCD_ALT is not set

#
# USB Device Class drivers
#
CONFIG_USB_AUDIO=m
CONFIG_USB_BLUETOOTH_TTY=m
CONFIG_USB_MIDI=m
CONFIG_USB_ACM=m
CONFIG_USB_PRINTER=m
CONFIG_USB_STORAGE=m
CONFIG_USB_STORAGE_DEBUG=y
CONFIG_USB_STORAGE_DATAFAB=y
CONFIG_USB_STORAGE_FREECOM=y
CONFIG_USB_STORAGE_ISD200=y
CONFIG_USB_STORAGE_DPCM=y
CONFIG_USB_STORAGE_HP8200e=y
CONFIG_USB_STORAGE_SDDR09=y
CONFIG_USB_STORAGE_SDDR55=y
CONFIG_USB_STORAGE_JUMPSHOT=y

#
# USB Human Interface Devices (HID)
#
CONFIG_USB_HID=m
CONFIG_USB_HIDINPUT=y
CONFIG_HID_FF=y
CONFIG_HID_PID=y
CONFIG_LOGITECH_FF=y
CONFIG_USB_HIDDEV=y
CONFIG_USB_KBD=m
CONFIG_USB_MOUSE=m
CONFIG_USB_AIPTEK=m
CONFIG_USB_WACOM=m
CONFIG_USB_POWERMATE=m
CONFIG_USB_XPAD=m

#
# USB Imaging devices
#
CONFIG_USB_MDC800=m
CONFIG_USB_SCANNER=m
CONFIG_USB_MICROTEK=m
CONFIG_USB_HPUSBSCSI=m

#
# USB Multimedia devices
#
CONFIG_USB_DABUSB=m
CONFIG_USB_VICAM=m
CONFIG_USB_DSBR=m
CONFIG_USB_IBMCAM=m
CONFIG_USB_KONICAWC=m
CONFIG_USB_OV511=m
CONFIG_USB_PWC=m
CONFIG_USB_SE401=m
CONFIG_USB_STV680=m

#
# USB Network adaptors
#
CONFIG_USB_CATC=m
CONFIG_USB_CDCETHER=m
CONFIG_USB_KAWETH=m
CONFIG_USB_PEGASUS=m
CONFIG_USB_RTL8150=m
CONFIG_USB_USBNET=m

#
# USB port drivers
#
CONFIG_USB_USS720=m

#
# USB Serial Converter support
#
CONFIG_USB_SERIAL=m
CONFIG_USB_SERIAL_GENERIC=y
CONFIG_USB_SERIAL_BELKIN=m
CONFIG_USB_SERIAL_WHITEHEAT=m
CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
CONFIG_USB_SERIAL_EMPEG=m
CONFIG_USB_SERIAL_FTDI_SIO=m
CONFIG_USB_SERIAL_VISOR=m
CONFIG_USB_SERIAL_IPAQ=m
CONFIG_USB_SERIAL_IR=m
CONFIG_USB_SERIAL_EDGEPORT=m
CONFIG_USB_SERIAL_EDGEPORT_TI=m
CONFIG_USB_SERIAL_KEYSPAN_PDA=m
CONFIG_USB_SERIAL_KEYSPAN=m
CONFIG_USB_SERIAL_KEYSPAN_USA28=y
CONFIG_USB_SERIAL_KEYSPAN_USA28X=y
CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y
CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y
CONFIG_USB_SERIAL_KEYSPAN_USA19=y
CONFIG_USB_SERIAL_KEYSPAN_USA18X=y
CONFIG_USB_SERIAL_KEYSPAN_USA19W=y
CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y
CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y
CONFIG_USB_SERIAL_KEYSPAN_USA49W=y
CONFIG_USB_SERIAL_KLSI=m
CONFIG_USB_SERIAL_MCT_U232=m
CONFIG_USB_SERIAL_PL2303=m
CONFIG_USB_SERIAL_SAFE=m
CONFIG_USB_SERIAL_SAFE_PADDED=y
CONFIG_USB_SERIAL_CYBERJACK=m
CONFIG_USB_SERIAL_XIRCOM=m
CONFIG_USB_SERIAL_OMNINET=m

#
# USB Miscellaneous drivers
#
CONFIG_USB_EMI26=m
CONFIG_USB_TIGL=m
CONFIG_USB_AUERSWALD=m
CONFIG_USB_RIO500=m
CONFIG_USB_BRLVGER=m
CONFIG_USB_LCD=m
CONFIG_USB_SPEEDTOUCH=m

#
# Bluetooth support
#
# CONFIG_BLUEZ is not set

#
# Kernel hacking
#
# CONFIG_ALPHA_LEGACY_START_ADDRESS is not set
CONFIG_DEBUG_KERNEL=y
CONFIG_MATHEMU=y
# CONFIG_DEBUG_SLAB is not set
CONFIG_MAGIC_SYSRQ=y
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_RWLOCK is not set
# CONFIG_DEBUG_SEMAPHORE is not set

#
# Security options
#
CONFIG_SECURITY_CAPABILITIES=y

#
# Library routines
#
CONFIG_CRC32=m
CONFIG_ZLIB_INFLATE=m
CONFIG_ZLIB_DEFLATE=m

2002-09-22 20:02:27

by Arnaldo Carvalho de Melo

[permalink] [raw]
Subject: Re: Linux 2.5.38

Em Sun, Sep 22, 2002 at 10:02:10PM +0200, Jochen Friedrich escreveu:
> Hi,
>
> build fails on Alpha:
>
> make[2]: Entering directory `/home/src/linux-2.5.38/fs/partitions'
> gcc -Wp,-MD,./.check.o.d -D__KERNEL__ -I/home/src/linux-2.5.38/include
> -Wall -Wstrict-prototypes -Wno-trigraphs -O2 -fomit-frame-pointer
> -fno-strict-aliasing -fno-common -pipe -mno-fp-regs -ffixed-8 -mcpu=ev5
> -Wa,-mev6 -nostdinc -iwithprefix include -DKBUILD_BASENAME=check -c
> -o check.o check.c
> check.c: In function `devfs_create_cdrom':
> check.c:365: `devfs_handle' undeclared (first use in this function)
> check.c:365: (Each undeclared identifier is reported only once

See previous posts, it fails on all archs. Linus already merged fixes, IIRC.

- Arnaldo

2002-09-22 20:17:46

by Jochen Friedrich

[permalink] [raw]
Subject: Re: Linux 2.5.38

Hi,

sorry for the first post as Alexander Viro already posted a fix. Now, this
is a real Alpha problem, it seems (it has been there in 2.5.37, as well):

build fails on Alpha:

gcc -Wp,-MD,./.time.o.d -D__KERNEL__ -I/home/src/linux-2.5.38/include
-Wall -Wstrict-prototypes -Wno-trigraphs -O2 -fomit-frame-pointer
-fno-strict-aliasing -fno-common -pipe -mno-fp-regs -ffixed-8 -mcpu=ev5
-Wa,-mev6 -nostdinc -iwithprefix include -DKBUILD_BASENAME=time -c -o
time.o time.c
time.c: In function `timer_interrupt':
time.c:132: structure has no member named `tv_usec'
time.c:132: `tick' undeclared (first use in this function)
time.c:132: (Each undeclared identifier is reported only once
time.c:132: for each function it appears in.)
time.c:133: structure has no member named `tv_usec'
time.c: In function `time_init':
time.c:368: structure has no member named `tv_usec'
time.c: In function `do_gettimeofday':
time.c:417: structure has no member named `tv_usec'
time.c:410: warning: `usec' might be used uninitialized in this function
time.c: In function `do_settimeofday':
time.c:488: structure has no member named `tv_usec'
make[1]: *** [time.o] Error 1
make[1]: Leaving directory `/home/src/linux-2.5.38/arch/alpha/kernel'
make: *** [arch/alpha/kernel] Error 2

Cheers,
--jochen

> #
> # Automatically generated make config: don't edit
> #
> CONFIG_ALPHA=y
> # CONFIG_UID16 is not set
> # CONFIG_RWSEM_GENERIC_SPINLOCK is not set
> CONFIG_RWSEM_XCHGADD_ALGORITHM=y
> CONFIG_GENERIC_ISA_DMA=y
>
> #
> # Code maturity level options
> #
> CONFIG_EXPERIMENTAL=y
>
> #
> # General setup
> #
> CONFIG_NET=y
> CONFIG_SYSVIPC=y
> # CONFIG_BSD_PROCESS_ACCT is not set
> CONFIG_SYSCTL=y
>
> #
> # Loadable module support
> #
> CONFIG_MODULES=y
> CONFIG_MODVERSIONS=y
> CONFIG_KMOD=y
>
> #
> # System setup
> #
> CONFIG_ALPHA_GENERIC=y
> # CONFIG_ALPHA_ALCOR is not set
> # CONFIG_ALPHA_XL is not set
> # CONFIG_ALPHA_BOOK1 is not set
> # CONFIG_ALPHA_AVANTI is not set
> # CONFIG_ALPHA_CABRIOLET is not set
> # CONFIG_ALPHA_DP264 is not set
> # CONFIG_ALPHA_EB164 is not set
> # CONFIG_ALPHA_EB64P is not set
> # CONFIG_ALPHA_EB66 is not set
> # CONFIG_ALPHA_EB66P is not set
> # CONFIG_ALPHA_EIGER is not set
> # CONFIG_ALPHA_JENSEN is not set
> # CONFIG_ALPHA_LX164 is not set
> # CONFIG_ALPHA_MIATA is not set
> # CONFIG_ALPHA_MIKASA is not set
> # CONFIG_ALPHA_NAUTILUS is not set
> # CONFIG_ALPHA_NONAME is not set
> # CONFIG_ALPHA_NORITAKE is not set
> # CONFIG_ALPHA_PC164 is not set
> # CONFIG_ALPHA_P2K is not set
> # CONFIG_ALPHA_RAWHIDE is not set
> # CONFIG_ALPHA_RUFFIAN is not set
> # CONFIG_ALPHA_RX164 is not set
> # CONFIG_ALPHA_SX164 is not set
> # CONFIG_ALPHA_SABLE is not set
> # CONFIG_ALPHA_SHARK is not set
> # CONFIG_ALPHA_TAKARA is not set
> # CONFIG_ALPHA_TITAN is not set
> # CONFIG_ALPHA_WILDFIRE is not set
> CONFIG_ISA=y
> CONFIG_EISA=y
> # CONFIG_SBUS is not set
> # CONFIG_MCA is not set
> CONFIG_PCI=y
> CONFIG_ALPHA_BROKEN_IRQ_MASK=y
> # CONFIG_SMP is not set
> # CONFIG_DISCONTIGMEM is not set
> # CONFIG_ALPHA_LARGE_VMALLOC is not set
> CONFIG_PCI_NAMES=y
> CONFIG_HOTPLUG=y
>
> #
> # PCMCIA/CardBus support
> #
> # CONFIG_PCMCIA is not set
> CONFIG_KCORE_ELF=y
> # CONFIG_KCORE_AOUT is not set
> CONFIG_SRM_ENV=m
> CONFIG_BINFMT_AOUT=m
> CONFIG_OSF4_COMPAT=y
> CONFIG_BINFMT_ELF=y
> CONFIG_BINFMT_MISC=m
> CONFIG_BINFMT_EM86=m
>
> #
> # Parallel port support
> #
> CONFIG_PARPORT=m
> CONFIG_PARPORT_PC=m
> CONFIG_PARPORT_PC_CML1=m
> # CONFIG_PARPORT_SERIAL is not set
> CONFIG_PARPORT_PC_FIFO=y
> CONFIG_PARPORT_PC_SUPERIO=y
> # CONFIG_PARPORT_AMIGA is not set
> # CONFIG_PARPORT_MFC3 is not set
> # CONFIG_PARPORT_ATARI is not set
> # CONFIG_PARPORT_GSC is not set
> # CONFIG_PARPORT_SUNBPP is not set
> # CONFIG_PARPORT_OTHER is not set
> CONFIG_PARPORT_1284=y
>
> #
> # Memory Technology Devices (MTD)
> #
> # CONFIG_MTD is not set
>
> #
> # Plug and Play configuration
> #
> CONFIG_PNP=m
> CONFIG_ISAPNP=m
> # CONFIG_PNPBIOS is not set
>
> #
> # Block devices
> #
> CONFIG_BLK_DEV_FD=m
> # CONFIG_BLK_DEV_XD is not set
> # CONFIG_PARIDE is not set
> CONFIG_BLK_CPQ_DA=m
> # CONFIG_BLK_CPQ_CISS_DA is not set
> # CONFIG_CISS_SCSI_TAPE is not set
> # CONFIG_BLK_DEV_DAC960 is not set
> # CONFIG_BLK_DEV_UMEM is not set
> CONFIG_BLK_DEV_LOOP=m
> CONFIG_BLK_DEV_NBD=m
> CONFIG_BLK_DEV_RAM=m
> CONFIG_BLK_DEV_RAM_SIZE=4096
> # CONFIG_BLK_DEV_INITRD is not set
>
> #
> # Multi-device support (RAID and LVM)
> #
> CONFIG_MD=y
> CONFIG_BLK_DEV_MD=m
> CONFIG_MD_LINEAR=m
> CONFIG_MD_RAID0=m
> CONFIG_MD_RAID1=m
> CONFIG_MD_RAID5=m
> # CONFIG_MD_MULTIPATH is not set
> CONFIG_BLK_DEV_LVM=m
>
> #
> # ATA/ATAPI/MFM/RLL support
> #
> # CONFIG_IDE is not set
> # CONFIG_BLK_DEV_HD is not set
>
> #
> # SCSI support
> #
> CONFIG_SCSI=y
>
> #
> # SCSI support type (disk, tape, CD-ROM)
> #
> CONFIG_BLK_DEV_SD=y
> CONFIG_SD_EXTRA_DEVS=40
> CONFIG_CHR_DEV_ST=m
> # CONFIG_CHR_DEV_OSST is not set
> CONFIG_BLK_DEV_SR=m
> CONFIG_BLK_DEV_SR_VENDOR=y
> CONFIG_SR_EXTRA_DEVS=2
> CONFIG_CHR_DEV_SG=m
>
> #
> # Some SCSI devices (e.g. CD jukebox) support multiple LUNs
> #
> CONFIG_SCSI_MULTI_LUN=y
> # CONFIG_SCSI_REPORT_LUNS is not set
> CONFIG_SCSI_CONSTANTS=y
> # CONFIG_SCSI_LOGGING is not set
>
> #
> # SCSI low-level drivers
> #
> # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
> # CONFIG_SCSI_7000FASST is not set
> # CONFIG_SCSI_ACARD is not set
> # CONFIG_SCSI_AHA152X is not set
> # CONFIG_SCSI_AHA1542 is not set
> # CONFIG_SCSI_AHA1740 is not set
> # CONFIG_SCSI_AIC7XXX is not set
> # CONFIG_SCSI_AIC7XXX_OLD is not set
> # CONFIG_SCSI_DPT_I2O is not set
> # CONFIG_SCSI_ADVANSYS is not set
> # CONFIG_SCSI_IN2000 is not set
> # CONFIG_SCSI_AM53C974 is not set
> # CONFIG_SCSI_MEGARAID is not set
> # CONFIG_SCSI_BUSLOGIC is not set
> # CONFIG_SCSI_CPQFCTS is not set
> # CONFIG_SCSI_DMX3191D is not set
> # CONFIG_SCSI_DTC3280 is not set
> # CONFIG_SCSI_EATA is not set
> # CONFIG_SCSI_EATA_DMA is not set
> # CONFIG_SCSI_EATA_PIO is not set
> # CONFIG_SCSI_FUTURE_DOMAIN is not set
> # CONFIG_SCSI_GDTH is not set
> # CONFIG_SCSI_GENERIC_NCR5380 is not set
> # CONFIG_SCSI_INITIO is not set
> # CONFIG_SCSI_INIA100 is not set
> CONFIG_SCSI_PPA=m
> CONFIG_SCSI_IMM=m
> # CONFIG_SCSI_IZIP_EPP16 is not set
> # CONFIG_SCSI_IZIP_SLOW_CTR is not set
> # CONFIG_SCSI_NCR53C406A is not set
> # CONFIG_SCSI_NCR53C7xx is not set
> CONFIG_SCSI_SYM53C8XX_2=m
> CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
> CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
> CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
> # CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set
> CONFIG_SCSI_NCR53C8XX=y
> # CONFIG_SCSI_SYM53C8XX is not set
> CONFIG_SCSI_NCR53C8XX_DEFAULT_TAGS=8
> CONFIG_SCSI_NCR53C8XX_MAX_TAGS=32
> CONFIG_SCSI_NCR53C8XX_SYNC=20
> # CONFIG_SCSI_NCR53C8XX_PROFILE is not set
> # CONFIG_SCSI_NCR53C8XX_IOMAPPED is not set
> # CONFIG_SCSI_NCR53C8XX_SYMBIOS_COMPAT is not set
> # CONFIG_SCSI_PAS16 is not set
> # CONFIG_SCSI_PCI2000 is not set
> # CONFIG_SCSI_PCI2220I is not set
> # CONFIG_SCSI_PSI240I is not set
> # CONFIG_SCSI_QLOGIC_FAS is not set
> # CONFIG_SCSI_QLOGIC_ISP is not set
> # CONFIG_SCSI_QLOGIC_FC is not set
> # CONFIG_SCSI_QLOGIC_1280 is not set
> # CONFIG_SCSI_SIM710 is not set
> # CONFIG_SCSI_SYM53C416 is not set
> # CONFIG_SCSI_DC390T is not set
> # CONFIG_SCSI_T128 is not set
> # CONFIG_SCSI_U14_34F is not set
> # CONFIG_SCSI_DEBUG is not set
>
> #
> # Fusion MPT device support
> #
> # CONFIG_FUSION is not set
> # CONFIG_FUSION_BOOT is not set
> # CONFIG_FUSION_ISENSE is not set
> # CONFIG_FUSION_CTL is not set
> # CONFIG_FUSION_LAN is not set
>
> #
> # Networking options
> #
> CONFIG_PACKET=m
> CONFIG_PACKET_MMAP=y
> CONFIG_NETLINK_DEV=m
> CONFIG_NETFILTER=y
> # CONFIG_NETFILTER_DEBUG is not set
> CONFIG_FILTER=y
> CONFIG_UNIX=y
> CONFIG_INET=y
> CONFIG_IP_MULTICAST=y
> CONFIG_IP_ADVANCED_ROUTER=y
> CONFIG_IP_MULTIPLE_TABLES=y
> CONFIG_IP_ROUTE_FWMARK=y
> CONFIG_IP_ROUTE_NAT=y
> CONFIG_IP_ROUTE_MULTIPATH=y
> CONFIG_IP_ROUTE_TOS=y
> CONFIG_IP_ROUTE_VERBOSE=y
> CONFIG_IP_ROUTE_LARGE_TABLES=y
> # CONFIG_IP_PNP is not set
> CONFIG_NET_IPIP=m
> CONFIG_NET_IPGRE=m
> CONFIG_NET_IPGRE_BROADCAST=y
> CONFIG_IP_MROUTE=y
> CONFIG_IP_PIMSM_V1=y
> CONFIG_IP_PIMSM_V2=y
> CONFIG_ARPD=y
> CONFIG_INET_ECN=y
> CONFIG_SYN_COOKIES=y
>
> #
> # IP: Netfilter Configuration
> #
> CONFIG_IP_NF_CONNTRACK=m
> CONFIG_IP_NF_FTP=m
> CONFIG_IP_NF_IRC=m
> CONFIG_IP_NF_QUEUE=m
> CONFIG_IP_NF_IPTABLES=m
> CONFIG_IP_NF_MATCH_LIMIT=m
> CONFIG_IP_NF_MATCH_MAC=m
> CONFIG_IP_NF_MATCH_PKTTYPE=m
> CONFIG_IP_NF_MATCH_MARK=m
> CONFIG_IP_NF_MATCH_MULTIPORT=m
> CONFIG_IP_NF_MATCH_TOS=m
> CONFIG_IP_NF_MATCH_ECN=m
> CONFIG_IP_NF_MATCH_DSCP=m
> CONFIG_IP_NF_MATCH_AH_ESP=m
> CONFIG_IP_NF_MATCH_LENGTH=m
> CONFIG_IP_NF_MATCH_TTL=m
> CONFIG_IP_NF_MATCH_TCPMSS=m
> CONFIG_IP_NF_MATCH_HELPER=m
> CONFIG_IP_NF_MATCH_STATE=m
> CONFIG_IP_NF_MATCH_CONNTRACK=m
> CONFIG_IP_NF_MATCH_UNCLEAN=m
> CONFIG_IP_NF_MATCH_OWNER=m
> CONFIG_IP_NF_FILTER=m
> CONFIG_IP_NF_TARGET_REJECT=m
> CONFIG_IP_NF_TARGET_MIRROR=m
> CONFIG_IP_NF_NAT=m
> CONFIG_IP_NF_NAT_NEEDED=y
> CONFIG_IP_NF_TARGET_MASQUERADE=m
> CONFIG_IP_NF_TARGET_REDIRECT=m
> # CONFIG_IP_NF_NAT_LOCAL is not set
> CONFIG_IP_NF_NAT_SNMP_BASIC=m
> CONFIG_IP_NF_NAT_IRC=m
> CONFIG_IP_NF_NAT_FTP=m
> CONFIG_IP_NF_MANGLE=m
> CONFIG_IP_NF_TARGET_TOS=m
> CONFIG_IP_NF_TARGET_ECN=m
> CONFIG_IP_NF_TARGET_DSCP=m
> CONFIG_IP_NF_TARGET_MARK=m
> CONFIG_IP_NF_TARGET_LOG=m
> CONFIG_IP_NF_TARGET_ULOG=m
> CONFIG_IP_NF_TARGET_TCPMSS=m
> CONFIG_IP_NF_ARPTABLES=m
> CONFIG_IP_NF_ARPFILTER=m
> CONFIG_IP_NF_COMPAT_IPCHAINS=m
> CONFIG_IP_NF_NAT_NEEDED=y
> CONFIG_IP_NF_COMPAT_IPFWADM=m
> CONFIG_IP_NF_NAT_NEEDED=y
> CONFIG_IPV6=m
>
> #
> # IPv6: Netfilter Configuration
> #
> CONFIG_IP6_NF_QUEUE=m
> CONFIG_IP6_NF_IPTABLES=m
> CONFIG_IP6_NF_MATCH_LIMIT=m
> CONFIG_IP6_NF_MATCH_MAC=m
> CONFIG_IP6_NF_MATCH_MULTIPORT=m
> CONFIG_IP6_NF_MATCH_OWNER=m
> CONFIG_IP6_NF_MATCH_MARK=m
> CONFIG_IP6_NF_MATCH_LENGTH=m
> CONFIG_IP6_NF_MATCH_EUI64=m
> CONFIG_IP6_NF_FILTER=m
> CONFIG_IP6_NF_TARGET_LOG=m
> CONFIG_IP6_NF_MANGLE=m
> CONFIG_IP6_NF_TARGET_MARK=m
>
> #
> # SCTP Configuration (EXPERIMENTAL)
> #
> CONFIG_IPV6_SCTP__=m
> CONFIG_IP_SCTP=m
> # CONFIG_SCTP_ADLER32 is not set
> # CONFIG_SCTP_DBG_MSG is not set
> # CONFIG_SCTP_DBG_OBJCNT is not set
> CONFIG_ATM=y
> CONFIG_ATM_CLIP=y
> CONFIG_ATM_CLIP_NO_ICMP=y
> CONFIG_ATM_LANE=m
> CONFIG_ATM_MPOA=m
> CONFIG_VLAN_8021Q=m
> CONFIG_LLC=y
> CONFIG_LLC_UI=m
> CONFIG_IPX=m
> CONFIG_IPX_INTERN=y
> CONFIG_ATALK=m
> # CONFIG_DEV_APPLETALK is not set
> CONFIG_DECNET=m
> CONFIG_DECNET_SIOCGIFCONF=y
> CONFIG_DECNET_ROUTER=y
> CONFIG_DECNET_ROUTE_FWMARK=y
> CONFIG_BRIDGE=m
> CONFIG_BRIDGE_NF_EBTABLES=m
> CONFIG_BRIDGE_EBT_T_FILTER=m
> CONFIG_BRIDGE_EBT_T_NAT=m
> CONFIG_BRIDGE_EBT_BROUTE=m
> CONFIG_BRIDGE_EBT_LOG=m
> CONFIG_BRIDGE_EBT_IPF=m
> CONFIG_BRIDGE_EBT_ARPF=m
> CONFIG_BRIDGE_EBT_VLANF=m
> CONFIG_BRIDGE_EBT_MARKF=m
> CONFIG_BRIDGE_EBT_SNAT=m
> CONFIG_BRIDGE_EBT_DNAT=m
> CONFIG_BRIDGE_EBT_REDIRECT=m
> CONFIG_BRIDGE_EBT_MARK_T=m
> CONFIG_X25=m
> CONFIG_LAPB=m
> # CONFIG_NET_DIVERT is not set
> CONFIG_ECONET=m
> CONFIG_ECONET_AUNUDP=y
> CONFIG_ECONET_NATIVE=y
> CONFIG_WAN_ROUTER=m
> # CONFIG_NET_FASTROUTE is not set
> # CONFIG_NET_HW_FLOWCONTROL is not set
>
> #
> # QoS and/or fair queueing
> #
> CONFIG_NET_SCHED=y
> CONFIG_NET_SCH_CBQ=m
> CONFIG_NET_SCH_HTB=m
> CONFIG_NET_SCH_CSZ=m
> CONFIG_NET_SCH_ATM=y
> CONFIG_NET_SCH_PRIO=m
> CONFIG_NET_SCH_RED=m
> CONFIG_NET_SCH_SFQ=m
> CONFIG_NET_SCH_TEQL=m
> CONFIG_NET_SCH_TBF=m
> CONFIG_NET_SCH_GRED=m
> CONFIG_NET_SCH_DSMARK=m
> CONFIG_NET_SCH_INGRESS=m
> CONFIG_NET_QOS=y
> CONFIG_NET_ESTIMATOR=y
> CONFIG_NET_CLS=y
> CONFIG_NET_CLS_TCINDEX=m
> CONFIG_NET_CLS_ROUTE4=m
> CONFIG_NET_CLS_ROUTE=y
> CONFIG_NET_CLS_FW=m
> CONFIG_NET_CLS_U32=m
> CONFIG_NET_CLS_RSVP=m
> CONFIG_NET_CLS_RSVP6=m
> CONFIG_NET_CLS_POLICE=y
>
> #
> # Network device support
> #
> CONFIG_NETDEVICES=y
>
> #
> # ARCnet devices
> #
> # CONFIG_ARCNET is not set
> CONFIG_DUMMY=m
> CONFIG_BONDING=m
> CONFIG_EQUALIZER=m
> CONFIG_TUN=m
> CONFIG_ETHERTAP=m
> # CONFIG_NET_SB1000 is not set
>
> #
> # Ethernet (10 or 100Mbit)
> #
> CONFIG_NET_ETHERNET=y
> # CONFIG_SUNLANCE is not set
> # CONFIG_HAPPYMEAL is not set
> # CONFIG_SUNBMAC is not set
> # CONFIG_SUNQE is not set
> # CONFIG_SUNGEM is not set
> # CONFIG_NET_VENDOR_3COM is not set
> # CONFIG_LANCE is not set
> # CONFIG_NET_VENDOR_SMC is not set
> # CONFIG_NET_VENDOR_RACAL is not set
> # CONFIG_AT1700 is not set
> # CONFIG_DEPCA is not set
> # CONFIG_HP100 is not set
> # CONFIG_NET_ISA is not set
> CONFIG_NET_PCI=y
> # CONFIG_PCNET32 is not set
> # CONFIG_ADAPTEC_STARFIRE is not set
> # CONFIG_AC3200 is not set
> # CONFIG_APRICOT is not set
> # CONFIG_CS89x0 is not set
> # CONFIG_DGRS is not set
> # CONFIG_EEPRO100 is not set
> # CONFIG_E100 is not set
> # CONFIG_LNE390 is not set
> # CONFIG_FEALNX is not set
> # CONFIG_NATSEMI is not set
> # CONFIG_NE2K_PCI is not set
> # CONFIG_NE3210 is not set
> # CONFIG_ES3210 is not set
> # CONFIG_8139CP is not set
> # CONFIG_8139TOO is not set
> # CONFIG_8139TOO_PIO is not set
> # CONFIG_8139TOO_TUNE_TWISTER is not set
> # CONFIG_8139TOO_8129 is not set
> # CONFIG_8139_OLD_RX_RESET is not set
> # CONFIG_SIS900 is not set
> # CONFIG_EPIC100 is not set
> # CONFIG_SUNDANCE is not set
> # CONFIG_SUNDANCE_MMIO is not set
> # CONFIG_TLAN is not set
> # CONFIG_VIA_RHINE is not set
> # CONFIG_VIA_RHINE_MMIO is not set
> # CONFIG_NET_POCKET is not set
>
> #
> # Ethernet (1000 Mbit)
> #
> # CONFIG_ACENIC is not set
> # CONFIG_DL2K is not set
> # CONFIG_E1000 is not set
> # CONFIG_E1000_NAPI is not set
> # CONFIG_MYRI_SBUS is not set
> # CONFIG_NS83820 is not set
> # CONFIG_HAMACHI is not set
> # CONFIG_YELLOWFIN is not set
> # CONFIG_SK98LIN is not set
> # CONFIG_TIGON3 is not set
> # CONFIG_FDDI is not set
> # CONFIG_HIPPI is not set
> CONFIG_PLIP=m
> CONFIG_PPP=m
> CONFIG_PPP_MULTILINK=y
> # CONFIG_PPP_FILTER is not set
> CONFIG_PPP_ASYNC=m
> CONFIG_PPP_SYNC_TTY=m
> CONFIG_PPP_DEFLATE=m
> CONFIG_PPP_BSDCOMP=m
> CONFIG_PPPOE=m
> CONFIG_PPPOATM=m
> CONFIG_SLIP=m
> CONFIG_SLIP_COMPRESSED=y
> CONFIG_SLIP_SMART=y
> CONFIG_SLIP_MODE_SLIP6=y
>
> #
> # Wireless LAN (non-hamradio)
> #
> # CONFIG_NET_RADIO is not set
>
> #
> # Token Ring devices
> #
> CONFIG_TR=y
> CONFIG_IBMTR=m
> CONFIG_IBMOL=m
> CONFIG_IBMLS=m
> CONFIG_3C359=m
> CONFIG_TMS380TR=m
> CONFIG_TMSPCI=m
> CONFIG_TMSISA=m
> CONFIG_ABYSS=m
> # CONFIG_MADGEMC is not set
> # CONFIG_SMCTR is not set
> # CONFIG_NET_FC is not set
> # CONFIG_RCPCI is not set
> # CONFIG_SHAPER is not set
>
> #
> # Wan interfaces
> #
> CONFIG_WAN=y
> # CONFIG_HOSTESS_SV11 is not set
> # CONFIG_COSA is not set
> # CONFIG_COMX is not set
> # CONFIG_DSCC4 is not set
> # CONFIG_LANMEDIA is not set
> # CONFIG_SEALEVEL_4021 is not set
> # CONFIG_SYNCLINK_SYNCPPP is not set
> CONFIG_HDLC=m
> CONFIG_HDLC_RAW=y
> CONFIG_HDLC_CISCO=y
> # CONFIG_HDLC_FR is not set
> CONFIG_HDLC_PPP=y
> CONFIG_HDLC_X25=y
> CONFIG_PC300=m
> # CONFIG_PC300_MLPPP is not set
> CONFIG_N2=m
> CONFIG_C101=m
> # CONFIG_FARSYNC is not set
> # CONFIG_HDLC_DEBUG_PKT is not set
> # CONFIG_HDLC_DEBUG_HARD_HEADER is not set
> # CONFIG_HDLC_DEBUG_ECN is not set
> # CONFIG_HDLC_DEBUG_RINGS is not set
> # CONFIG_DLCI is not set
> # CONFIG_WAN_ROUTER_DRIVERS is not set
> CONFIG_LAPBETHER=m
> CONFIG_X25_ASY=m
>
> #
> # Tulip family network device support
> #
> CONFIG_NET_TULIP=y
> CONFIG_DE2104X=m
> CONFIG_TULIP=m
> # CONFIG_TULIP_MWI is not set
> # CONFIG_TULIP_MMIO is not set
> CONFIG_DE4X5=m
> # CONFIG_WINBOND_840 is not set
> # CONFIG_DM9102 is not set
>
> #
> # ATM drivers
> #
> CONFIG_ATM_TCP=m
> # CONFIG_ATM_LANAI is not set
> # CONFIG_ATM_ENI is not set
> # CONFIG_ATM_FIRESTREAM is not set
> # CONFIG_ATM_ZATM is not set
> # CONFIG_ATM_NICSTAR is not set
> # CONFIG_ATM_IDT77252 is not set
> # CONFIG_ATM_AMBASSADOR is not set
> # CONFIG_ATM_HORIZON is not set
> # CONFIG_ATM_IA is not set
> # CONFIG_ATM_FORE200E_MAYBE is not set
>
> #
> # Amateur Radio support
> #
> # CONFIG_HAMRADIO is not set
>
> #
> # ISDN subsystem
> #
> CONFIG_ISDN_BOOL=y
>
> #
> # Old ISDN4Linux
> #
> CONFIG_ISDN=m
> CONFIG_ISDN_PPP=y
> CONFIG_ISDN_PPP_VJ=y
> CONFIG_ISDN_MPP=y
> CONFIG_ISDN_PPP_BSDCOMP=m
> CONFIG_ISDN_AUDIO=y
> CONFIG_ISDN_TTY_FAX=y
> CONFIG_ISDN_X25=y
>
> #
> # ISDN feature submodules
> #
> CONFIG_ISDN_DRV_LOOP=m
> CONFIG_ISDN_DIVERSION=m
>
> #
> # CAPI subsystem
> #
> CONFIG_ISDN_CAPI=m
> CONFIG_ISDN_DRV_AVMB1_VERBOSE_REASON=y
> CONFIG_ISDN_CAPI_MIDDLEWARE=y
> CONFIG_ISDN_CAPI_CAPI20=m
> CONFIG_ISDN_CAPI_CAPIFS_BOOL=y
> CONFIG_ISDN_CAPI_CAPIFS=m
> CONFIG_ISDN_CAPI_CAPIDRV=m
>
> #
> # CAPI hardware drivers
> #
>
> #
> # Active AVM cards
> #
> CONFIG_CAPI_AVM=y
> # CONFIG_ISDN_DRV_AVMB1_B1ISA is not set
> CONFIG_ISDN_DRV_AVMB1_B1PCI=m
> # CONFIG_ISDN_DRV_AVMB1_B1PCIV4 is not set
> # CONFIG_ISDN_DRV_AVMB1_T1ISA is not set
> # CONFIG_ISDN_DRV_AVMB1_B1PCMCIA is not set
> # CONFIG_ISDN_DRV_AVMB1_AVM_CS is not set
> # CONFIG_ISDN_DRV_AVMB1_T1PCI is not set
> # CONFIG_ISDN_DRV_AVMB1_C4 is not set
>
> #
> # ISDN4Linux hardware drivers
> #
>
> #
> # Passive cards
> #
> CONFIG_ISDN_DRV_HISAX=m
>
> #
> # D-channel protocol features
> #
> CONFIG_HISAX_EURO=y
> CONFIG_DE_AOC=y
> # CONFIG_HISAX_NO_SENDCOMPLETE is not set
> # CONFIG_HISAX_NO_LLC is not set
> # CONFIG_HISAX_NO_KEYPAD is not set
> # CONFIG_HISAX_1TR6 is not set
> # CONFIG_HISAX_NI1 is not set
> CONFIG_HISAX_MAX_CARDS=8
>
> #
> # HiSax supported cards
> #
> # CONFIG_HISAX_16_0 is not set
> # CONFIG_HISAX_16_3 is not set
> # CONFIG_HISAX_TELESPCI is not set
> # CONFIG_HISAX_S0BOX is not set
> CONFIG_HISAX_AVM_A1=y
> # CONFIG_HISAX_FRITZPCI is not set
> # CONFIG_HISAX_AVM_A1_PCMCIA is not set
> # CONFIG_HISAX_ELSA is not set
> # CONFIG_HISAX_IX1MICROR2 is not set
> # CONFIG_HISAX_DIEHLDIVA is not set
> # CONFIG_HISAX_ASUSCOM is not set
> # CONFIG_HISAX_TELEINT is not set
> # CONFIG_HISAX_HFCS is not set
> # CONFIG_HISAX_SEDLBAUER is not set
> # CONFIG_HISAX_SPORTSTER is not set
> # CONFIG_HISAX_MIC is not set
> # CONFIG_HISAX_NETJET is not set
> # CONFIG_HISAX_NETJET_U is not set
> # CONFIG_HISAX_NICCY is not set
> # CONFIG_HISAX_ISURF is not set
> # CONFIG_HISAX_HSTSAPHIR is not set
> # CONFIG_HISAX_BKM_A4T is not set
> # CONFIG_HISAX_SCT_QUADRO is not set
> # CONFIG_HISAX_GAZEL is not set
> # CONFIG_HISAX_HFC_PCI is not set
> # CONFIG_HISAX_W6692 is not set
> # CONFIG_HISAX_HFC_SX is not set
> # CONFIG_HISAX_ENTERNOW_PCI is not set
> # CONFIG_HISAX_DEBUG is not set
> # CONFIG_HISAX_SEDLBAUER_CS is not set
> # CONFIG_HISAX_ELSA_CS is not set
> # CONFIG_HISAX_AVM_A1_CS is not set
> # CONFIG_HISAX_ST5481 is not set
> # CONFIG_HISAX_FRITZ_PCIPNP is not set
> CONFIG_HISAX_FRITZ_CLASSIC=m
> # CONFIG_HISAX_HFCPCI is not set
>
> #
> # Active cards
> #
> # CONFIG_ISDN_DRV_ICN is not set
> # CONFIG_ISDN_DRV_PCBIT is not set
> # CONFIG_ISDN_DRV_SC is not set
> # CONFIG_ISDN_DRV_ACT2000 is not set
> # CONFIG_ISDN_DRV_EICON is not set
> # CONFIG_ISDN_DRV_TPAM is not set
> # CONFIG_HYSDN is not set
> # CONFIG_HYSDN_CAPI is not set
>
> #
> # Old CD-ROM drivers (not SCSI, not IDE)
> #
> # CONFIG_CD_NO_IDESCSI is not set
>
> #
> # Input device support
> #
> CONFIG_INPUT=y
>
> #
> # Userland interfaces
> #
> CONFIG_INPUT_MOUSEDEV=m
> CONFIG_INPUT_MOUSEDEV_PSAUX=y
> CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
> CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
> # CONFIG_INPUT_JOYDEV is not set
> # CONFIG_INPUT_TSDEV is not set
> CONFIG_INPUT_EVDEV=m
> # CONFIG_INPUT_EVBUG is not set
>
> #
> # Input I/O drivers
> #
> # CONFIG_GAMEPORT is not set
> CONFIG_SOUND_GAMEPORT=y
> # CONFIG_GAMEPORT_NS558 is not set
> # CONFIG_GAMEPORT_L4 is not set
> # CONFIG_GAMEPORT_EMU10K1 is not set
> # CONFIG_GAMEPORT_VORTEX is not set
> # CONFIG_GAMEPORT_FM801 is not set
> # CONFIG_GAMEPORT_CS461x is not set
> CONFIG_SERIO=m
> CONFIG_SERIO_I8042=m
> CONFIG_SERIO_SERPORT=m
> CONFIG_SERIO_CT82C710=m
> CONFIG_SERIO_PARKBD=m
>
> #
> # Input Device Drivers
> #
> CONFIG_INPUT_KEYBOARD=y
> CONFIG_KEYBOARD_ATKBD=m
> CONFIG_KEYBOARD_SUNKBD=m
> CONFIG_KEYBOARD_XTKBD=m
> CONFIG_KEYBOARD_NEWTON=m
> CONFIG_INPUT_MOUSE=y
> CONFIG_MOUSE_PS2=m
> CONFIG_MOUSE_SERIAL=m
> CONFIG_MOUSE_INPORT=m
> # CONFIG_MOUSE_ATIXL is not set
> CONFIG_MOUSE_LOGIBM=m
> CONFIG_MOUSE_PC110PAD=m
> # CONFIG_INPUT_JOYSTICK is not set
> # CONFIG_JOYSTICK_ANALOG is not set
> # CONFIG_JOYSTICK_A3D is not set
> # CONFIG_JOYSTICK_ADI is not set
> # CONFIG_JOYSTICK_COBRA is not set
> # CONFIG_JOYSTICK_GF2K is not set
> # CONFIG_JOYSTICK_GRIP is not set
> # CONFIG_JOYSTICK_GRIP_MP is not set
> # CONFIG_JOYSTICK_GUILLEMOT is not set
> # CONFIG_JOYSTICK_INTERACT is not set
> # CONFIG_JOYSTICK_SIDEWINDER is not set
> # CONFIG_JOYSTICK_TMDC is not set
> # CONFIG_JOYSTICK_IFORCE is not set
> # CONFIG_JOYSTICK_WARRIOR is not set
> # CONFIG_JOYSTICK_MAGELLAN is not set
> # CONFIG_JOYSTICK_SPACEORB is not set
> # CONFIG_JOYSTICK_SPACEBALL is not set
> # CONFIG_JOYSTICK_STINGER is not set
> # CONFIG_JOYSTICK_TWIDDLER is not set
> # CONFIG_JOYSTICK_DB9 is not set
> # CONFIG_JOYSTICK_GAMECON is not set
> # CONFIG_JOYSTICK_TURBOGRAFX is not set
> # CONFIG_INPUT_JOYDUMP is not set
> # CONFIG_INPUT_TOUCHSCREEN is not set
> # CONFIG_TOUCHSCREEN_GUNZE is not set
> CONFIG_INPUT_MISC=y
> # CONFIG_INPUT_PCSPKR is not set
> # CONFIG_INPUT_UINPUT is not set
>
> #
> # Character devices
> #
> CONFIG_VT=y
> CONFIG_VT_CONSOLE=y
> CONFIG_HW_CONSOLE=y
> # CONFIG_SERIAL_NONSTANDARD is not set
>
> #
> # Serial drivers
> #
> CONFIG_SERIAL_8250=m
> # CONFIG_SERIAL_8250_CONSOLE is not set
> # CONFIG_SERIAL_8250_CS is not set
> CONFIG_SERIAL_8250_EXTENDED=y
> # CONFIG_SERIAL_8250_MANY_PORTS is not set
> CONFIG_SERIAL_8250_SHARE_IRQ=y
> # CONFIG_SERIAL_8250_DETECT_IRQ is not set
> # CONFIG_SERIAL_8250_MULTIPORT is not set
> # CONFIG_SERIAL_8250_RSA is not set
>
> #
> # Non-8250 serial port support
> #
> CONFIG_SERIAL_CORE=m
> CONFIG_UNIX98_PTYS=y
> CONFIG_UNIX98_PTY_COUNT=256
> CONFIG_PRINTER=m
> # CONFIG_LP_CONSOLE is not set
> # CONFIG_PPDEV is not set
>
> #
> # I2C support
> #
> # CONFIG_I2C is not set
>
> #
> # Mice
> #
> # CONFIG_BUSMOUSE is not set
> # CONFIG_QIC02_TAPE is not set
>
> #
> # Watchdog Cards
> #
> # CONFIG_WATCHDOG is not set
> # CONFIG_NVRAM is not set
> # CONFIG_RTC is not set
> CONFIG_GEN_RTC=m
> CONFIG_GEN_RTC_X=y
> # CONFIG_DTLK is not set
> CONFIG_R3964=m
> CONFIG_APPLICOM=m
>
> #
> # Ftape, the floppy tape device driver
> #
> # CONFIG_FTAPE is not set
> # CONFIG_AGP is not set
> # CONFIG_DRM is not set
> CONFIG_RAW_DRIVER=m
>
> #
> # Multimedia devices
> #
> CONFIG_VIDEO_DEV=m
>
> #
> # Video For Linux
> #
> # CONFIG_VIDEO_PROC_FS is not set
>
> #
> # Video Adapters
> #
> # CONFIG_VIDEO_PMS is not set
> # CONFIG_VIDEO_BWQCAM is not set
> # CONFIG_VIDEO_CQCAM is not set
> # CONFIG_VIDEO_W9966 is not set
> # CONFIG_VIDEO_CPIA is not set
> # CONFIG_VIDEO_SAA5249 is not set
> # CONFIG_TUNER_3036 is not set
> # CONFIG_VIDEO_STRADIS is not set
> # CONFIG_VIDEO_ZORAN is not set
> # CONFIG_VIDEO_ZORAN_BUZ is not set
> # CONFIG_VIDEO_ZORAN_DC10 is not set
> # CONFIG_VIDEO_ZORAN_LML33 is not set
> # CONFIG_VIDEO_ZR36120 is not set
> # CONFIG_VIDEO_MEYE is not set
>
> #
> # Radio Adapters
> #
> # CONFIG_RADIO_CADET is not set
> # CONFIG_RADIO_RTRACK is not set
> # CONFIG_RADIO_RTRACK2 is not set
> # CONFIG_RADIO_AZTECH is not set
> # CONFIG_RADIO_GEMTEK is not set
> # CONFIG_RADIO_GEMTEK_PCI is not set
> # CONFIG_RADIO_MAXIRADIO is not set
> # CONFIG_RADIO_MAESTRO is not set
> # CONFIG_RADIO_MIROPCM20 is not set
> # CONFIG_RADIO_MIROPCM20_RDS is not set
> # CONFIG_RADIO_SF16FMI is not set
> # CONFIG_RADIO_TERRATEC is not set
> # CONFIG_RADIO_TRUST is not set
> # CONFIG_RADIO_TYPHOON is not set
> # CONFIG_RADIO_ZOLTRIX is not set
>
> #
> # File systems
> #
> # CONFIG_QUOTA is not set
> # CONFIG_QFMT_V1 is not set
> # CONFIG_QFMT_V2 is not set
> CONFIG_AUTOFS_FS=m
> CONFIG_AUTOFS4_FS=m
> CONFIG_REISERFS_FS=m
> # CONFIG_REISERFS_CHECK is not set
> # CONFIG_REISERFS_PROC_INFO is not set
> CONFIG_ADFS_FS=m
> # CONFIG_ADFS_FS_RW is not set
> CONFIG_AFFS_FS=m
> CONFIG_HFS_FS=m
> CONFIG_BFS_FS=m
> CONFIG_EXT3_FS=y
> CONFIG_JBD=y
> # CONFIG_JBD_DEBUG is not set
> CONFIG_FAT_FS=m
> CONFIG_MSDOS_FS=m
> # CONFIG_UMSDOS_FS is not set
> CONFIG_VFAT_FS=m
> CONFIG_EFS_FS=m
> # CONFIG_JFFS_FS is not set
> # CONFIG_JFFS2_FS is not set
> CONFIG_CRAMFS=m
> CONFIG_TMPFS=y
> CONFIG_RAMFS=y
> CONFIG_ISO9660_FS=m
> CONFIG_JOLIET=y
> # CONFIG_ZISOFS is not set
> CONFIG_JFS_FS=m
> # CONFIG_JFS_DEBUG is not set
> # CONFIG_JFS_STATISTICS is not set
> CONFIG_MINIX_FS=m
> CONFIG_VXFS_FS=m
> CONFIG_NTFS_FS=m
> # CONFIG_NTFS_DEBUG is not set
> # CONFIG_NTFS_RW is not set
> CONFIG_HPFS_FS=m
> CONFIG_PROC_FS=y
> CONFIG_DEVFS_FS=y
> CONFIG_DEVFS_MOUNT=y
> # CONFIG_DEVFS_DEBUG is not set
> CONFIG_DEVPTS_FS=y
> CONFIG_QNX4FS_FS=m
> # CONFIG_QNX4FS_RW is not set
> CONFIG_ROMFS_FS=m
> CONFIG_EXT2_FS=y
> CONFIG_SYSV_FS=m
> CONFIG_UDF_FS=m
> # CONFIG_UDF_RW is not set
> CONFIG_UFS_FS=m
> # CONFIG_UFS_FS_WRITE is not set
> CONFIG_XFS_FS=m
> # CONFIG_XFS_RT is not set
> # CONFIG_XFS_QUOTA is not set
>
> #
> # Network File Systems
> #
> CONFIG_CODA_FS=m
> # CONFIG_INTERMEZZO_FS is not set
> CONFIG_NFS_FS=m
> CONFIG_NFS_V3=y
> # CONFIG_ROOT_NFS is not set
> CONFIG_NFSD=m
> CONFIG_NFSD_V3=y
> # CONFIG_NFSD_TCP is not set
> CONFIG_SUNRPC=m
> CONFIG_LOCKD=m
> CONFIG_LOCKD_V4=y
> CONFIG_EXPORTFS=m
> CONFIG_SMB_FS=m
> # CONFIG_SMB_NLS_DEFAULT is not set
> CONFIG_NCP_FS=m
> CONFIG_NCPFS_PACKET_SIGNING=y
> CONFIG_NCPFS_IOCTL_LOCKING=y
> CONFIG_NCPFS_STRONG=y
> CONFIG_NCPFS_NFS_NS=y
> CONFIG_NCPFS_OS2_NS=y
> CONFIG_NCPFS_SMALLDOS=y
> CONFIG_NCPFS_NLS=y
> CONFIG_NCPFS_EXTRAS=y
> # CONFIG_ZISOFS_FS is not set
>
> #
> # Partition Types
> #
> CONFIG_PARTITION_ADVANCED=y
> CONFIG_ACORN_PARTITION=y
> CONFIG_ACORN_PARTITION_ICS=y
> CONFIG_ACORN_PARTITION_ADFS=y
> CONFIG_ACORN_PARTITION_POWERTEC=y
> CONFIG_ACORN_PARTITION_RISCIX=y
> CONFIG_OSF_PARTITION=y
> CONFIG_AMIGA_PARTITION=y
> CONFIG_ATARI_PARTITION=y
> CONFIG_MAC_PARTITION=y
> CONFIG_MSDOS_PARTITION=y
> CONFIG_BSD_DISKLABEL=y
> # CONFIG_MINIX_SUBPARTITION is not set
> CONFIG_SOLARIS_X86_PARTITION=y
> CONFIG_UNIXWARE_DISKLABEL=y
> # CONFIG_LDM_PARTITION is not set
> CONFIG_SGI_PARTITION=y
> # CONFIG_ULTRIX_PARTITION is not set
> CONFIG_SUN_PARTITION=y
> # CONFIG_EFI_PARTITION is not set
> CONFIG_SMB_NLS=y
> CONFIG_NLS=y
>
> #
> # Native Language Support
> #
> CONFIG_NLS_DEFAULT="iso8859-1"
> CONFIG_NLS_CODEPAGE_437=m
> CONFIG_NLS_CODEPAGE_737=m
> CONFIG_NLS_CODEPAGE_775=m
> CONFIG_NLS_CODEPAGE_850=m
> CONFIG_NLS_CODEPAGE_852=m
> CONFIG_NLS_CODEPAGE_855=m
> CONFIG_NLS_CODEPAGE_857=m
> CONFIG_NLS_CODEPAGE_860=m
> CONFIG_NLS_CODEPAGE_861=m
> CONFIG_NLS_CODEPAGE_862=m
> CONFIG_NLS_CODEPAGE_863=m
> CONFIG_NLS_CODEPAGE_864=m
> CONFIG_NLS_CODEPAGE_865=m
> CONFIG_NLS_CODEPAGE_866=m
> CONFIG_NLS_CODEPAGE_869=m
> CONFIG_NLS_CODEPAGE_936=m
> CONFIG_NLS_CODEPAGE_950=m
> CONFIG_NLS_CODEPAGE_932=m
> CONFIG_NLS_CODEPAGE_949=m
> CONFIG_NLS_CODEPAGE_874=m
> CONFIG_NLS_ISO8859_8=m
> CONFIG_NLS_CODEPAGE_1250=m
> CONFIG_NLS_CODEPAGE_1251=m
> CONFIG_NLS_ISO8859_1=m
> CONFIG_NLS_ISO8859_2=m
> CONFIG_NLS_ISO8859_3=m
> CONFIG_NLS_ISO8859_4=m
> CONFIG_NLS_ISO8859_5=m
> CONFIG_NLS_ISO8859_6=m
> CONFIG_NLS_ISO8859_7=m
> CONFIG_NLS_ISO8859_9=m
> CONFIG_NLS_ISO8859_13=m
> CONFIG_NLS_ISO8859_14=m
> CONFIG_NLS_ISO8859_15=m
> CONFIG_NLS_KOI8_R=m
> CONFIG_NLS_KOI8_U=m
> CONFIG_NLS_UTF8=m
>
> #
> # Console drivers
> #
> CONFIG_VGA_CONSOLE=y
>
> #
> # Frame-buffer support
> #
> CONFIG_FB=y
> CONFIG_DUMMY_CONSOLE=y
> # CONFIG_FB_CLGEN is not set
> # CONFIG_FB_PM2 is not set
> # CONFIG_FB_CYBER2000 is not set
> # CONFIG_FB_TGA is not set
> # CONFIG_FB_RIVA is not set
> # CONFIG_FB_MATROX is not set
> CONFIG_FB_ATY=y
> CONFIG_FB_ATY_GX=y
> CONFIG_FB_ATY_CT=y
> # CONFIG_FB_RADEON is not set
> # CONFIG_FB_ATY128 is not set
> # CONFIG_FB_SIS is not set
> # CONFIG_FB_NEOMAGIC is not set
> # CONFIG_FB_3DFX is not set
> # CONFIG_FB_VOODOO1 is not set
> CONFIG_FB_TRIDENT=m
> CONFIG_FB_PM3=m
> # CONFIG_FB_VIRTUAL is not set
> # CONFIG_FBCON_ADVANCED is not set
> CONFIG_FBCON_CFB8=m
> CONFIG_FBCON_CFB16=m
> CONFIG_FBCON_CFB24=y
> CONFIG_FBCON_CFB32=m
> CONFIG_FBCON_ACCEL=y
> # CONFIG_FBCON_FONTWIDTH8_ONLY is not set
> CONFIG_FBCON_FONTS=y
> CONFIG_FONT_8x8=y
> CONFIG_FONT_8x16=y
> CONFIG_FONT_SUN8x16=y
> CONFIG_FONT_SUN12x22=y
> # CONFIG_FONT_6x11 is not set
> # CONFIG_FONT_PEARL_8x8 is not set
> # CONFIG_FONT_ACORN_8x8 is not set
> CONFIG_PCI_CONSOLE=y
>
> #
> # Sound
> #
> CONFIG_SOUND=m
>
> #
> # Open Sound System
> #
> # CONFIG_SOUND_PRIME is not set
>
> #
> # Advanced Linux Sound Architecture
> #
> CONFIG_SND=m
> CONFIG_SND_SEQUENCER=m
> CONFIG_SND_SEQ_DUMMY=m
> CONFIG_SND_OSSEMUL=y
> CONFIG_SND_MIXER_OSS=m
> CONFIG_SND_PCM_OSS=m
> CONFIG_SND_SEQUENCER_OSS=y
> # CONFIG_SND_RTCTIMER is not set
> # CONFIG_SND_VERBOSE_PRINTK is not set
> # CONFIG_SND_DEBUG is not set
> # CONFIG_SND_DEBUG_MEMORY is not set
> # CONFIG_SND_DEBUG_DETECT is not set
>
> #
> # Generic devices
> #
> CONFIG_SND_DUMMY=m
> CONFIG_SND_VIRMIDI=m
> # CONFIG_SND_MTPAV is not set
> CONFIG_SND_SERIAL_U16550=m
> CONFIG_SND_MPU401=m
>
> #
> # ISA devices
> #
> # CONFIG_SND_AD1816A is not set
> # CONFIG_SND_AD1848 is not set
> # CONFIG_SND_CS4231 is not set
> # CONFIG_SND_CS4232 is not set
> # CONFIG_SND_CS4236 is not set
> # CONFIG_SND_ES968 is not set
> # CONFIG_SND_ES1688 is not set
> # CONFIG_SND_ES18XX is not set
> # CONFIG_SND_GUSCLASSIC is not set
> # CONFIG_SND_GUSEXTREME is not set
> # CONFIG_SND_GUSMAX is not set
> # CONFIG_SND_INTERWAVE is not set
> # CONFIG_SND_INTERWAVE_STB is not set
> # CONFIG_SND_OPTI92X_AD1848 is not set
> # CONFIG_SND_OPTI92X_CS4231 is not set
> # CONFIG_SND_OPTI93X is not set
> # CONFIG_SND_SB8 is not set
> # CONFIG_SND_SB16 is not set
> # CONFIG_SND_SBAWE is not set
> # CONFIG_SND_WAVEFRONT is not set
> # CONFIG_SND_ALS100 is not set
> # CONFIG_SND_AZT2320 is not set
> # CONFIG_SND_CMI8330 is not set
> # CONFIG_SND_DT0197H is not set
> # CONFIG_SND_OPL3SA2 is not set
> # CONFIG_SND_SGALAXY is not set
>
> #
> # PCI devices
> #
> # CONFIG_SND_ALI5451 is not set
> # CONFIG_SND_CS46XX is not set
> # CONFIG_SND_CS4281 is not set
> # CONFIG_SND_EMU10K1 is not set
> # CONFIG_SND_KORG1212 is not set
> # CONFIG_SND_NM256 is not set
> # CONFIG_SND_RME32 is not set
> # CONFIG_SND_RME96 is not set
> # CONFIG_SND_RME9652 is not set
> # CONFIG_SND_HDSP is not set
> # CONFIG_SND_TRIDENT is not set
> # CONFIG_SND_YMFPCI is not set
> # CONFIG_SND_ALS4000 is not set
> # CONFIG_SND_CMIPCI is not set
> CONFIG_SND_ENS1370=m
> CONFIG_SND_ENS1371=m
> # CONFIG_SND_ES1938 is not set
> # CONFIG_SND_ES1968 is not set
> # CONFIG_SND_MAESTRO3 is not set
> # CONFIG_SND_FM801 is not set
> # CONFIG_SND_ICE1712 is not set
> # CONFIG_SND_INTEL8X0 is not set
> # CONFIG_SND_SONICVIBES is not set
> # CONFIG_SND_VIA686 is not set
> # CONFIG_SND_VIA8233 is not set
>
> #
> # USB support
> #
> CONFIG_USB=m
> CONFIG_USB_DEBUG=y
>
> #
> # Miscellaneous USB options
> #
> CONFIG_USB_DEVICEFS=y
> # CONFIG_USB_LONG_TIMEOUT is not set
> # CONFIG_USB_BANDWIDTH is not set
> # CONFIG_USB_DYNAMIC_MINORS is not set
>
> #
> # USB Host Controller Drivers
> #
> # CONFIG_USB_EHCI_HCD is not set
> CONFIG_USB_OHCI_HCD=m
> # CONFIG_USB_UHCI_HCD_ALT is not set
>
> #
> # USB Device Class drivers
> #
> CONFIG_USB_AUDIO=m
> CONFIG_USB_BLUETOOTH_TTY=m
> CONFIG_USB_MIDI=m
> CONFIG_USB_ACM=m
> CONFIG_USB_PRINTER=m
> CONFIG_USB_STORAGE=m
> CONFIG_USB_STORAGE_DEBUG=y
> CONFIG_USB_STORAGE_DATAFAB=y
> CONFIG_USB_STORAGE_FREECOM=y
> CONFIG_USB_STORAGE_ISD200=y
> CONFIG_USB_STORAGE_DPCM=y
> CONFIG_USB_STORAGE_HP8200e=y
> CONFIG_USB_STORAGE_SDDR09=y
> CONFIG_USB_STORAGE_SDDR55=y
> CONFIG_USB_STORAGE_JUMPSHOT=y
>
> #
> # USB Human Interface Devices (HID)
> #
> CONFIG_USB_HID=m
> CONFIG_USB_HIDINPUT=y
> CONFIG_HID_FF=y
> CONFIG_HID_PID=y
> CONFIG_LOGITECH_FF=y
> CONFIG_USB_HIDDEV=y
> CONFIG_USB_KBD=m
> CONFIG_USB_MOUSE=m
> CONFIG_USB_AIPTEK=m
> CONFIG_USB_WACOM=m
> CONFIG_USB_POWERMATE=m
> CONFIG_USB_XPAD=m
>
> #
> # USB Imaging devices
> #
> CONFIG_USB_MDC800=m
> CONFIG_USB_SCANNER=m
> CONFIG_USB_MICROTEK=m
> CONFIG_USB_HPUSBSCSI=m
>
> #
> # USB Multimedia devices
> #
> CONFIG_USB_DABUSB=m
> CONFIG_USB_VICAM=m
> CONFIG_USB_DSBR=m
> CONFIG_USB_IBMCAM=m
> CONFIG_USB_KONICAWC=m
> CONFIG_USB_OV511=m
> CONFIG_USB_PWC=m
> CONFIG_USB_SE401=m
> CONFIG_USB_STV680=m
>
> #
> # USB Network adaptors
> #
> CONFIG_USB_CATC=m
> CONFIG_USB_CDCETHER=m
> CONFIG_USB_KAWETH=m
> CONFIG_USB_PEGASUS=m
> CONFIG_USB_RTL8150=m
> CONFIG_USB_USBNET=m
>
> #
> # USB port drivers
> #
> CONFIG_USB_USS720=m
>
> #
> # USB Serial Converter support
> #
> CONFIG_USB_SERIAL=m
> CONFIG_USB_SERIAL_GENERIC=y
> CONFIG_USB_SERIAL_BELKIN=m
> CONFIG_USB_SERIAL_WHITEHEAT=m
> CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
> CONFIG_USB_SERIAL_EMPEG=m
> CONFIG_USB_SERIAL_FTDI_SIO=m
> CONFIG_USB_SERIAL_VISOR=m
> CONFIG_USB_SERIAL_IPAQ=m
> CONFIG_USB_SERIAL_IR=m
> CONFIG_USB_SERIAL_EDGEPORT=m
> CONFIG_USB_SERIAL_EDGEPORT_TI=m
> CONFIG_USB_SERIAL_KEYSPAN_PDA=m
> CONFIG_USB_SERIAL_KEYSPAN=m
> CONFIG_USB_SERIAL_KEYSPAN_USA28=y
> CONFIG_USB_SERIAL_KEYSPAN_USA28X=y
> CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y
> CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y
> CONFIG_USB_SERIAL_KEYSPAN_USA19=y
> CONFIG_USB_SERIAL_KEYSPAN_USA18X=y
> CONFIG_USB_SERIAL_KEYSPAN_USA19W=y
> CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y
> CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y
> CONFIG_USB_SERIAL_KEYSPAN_USA49W=y
> CONFIG_USB_SERIAL_KLSI=m
> CONFIG_USB_SERIAL_MCT_U232=m
> CONFIG_USB_SERIAL_PL2303=m
> CONFIG_USB_SERIAL_SAFE=m
> CONFIG_USB_SERIAL_SAFE_PADDED=y
> CONFIG_USB_SERIAL_CYBERJACK=m
> CONFIG_USB_SERIAL_XIRCOM=m
> CONFIG_USB_SERIAL_OMNINET=m
>
> #
> # USB Miscellaneous drivers
> #
> CONFIG_USB_EMI26=m
> CONFIG_USB_TIGL=m
> CONFIG_USB_AUERSWALD=m
> CONFIG_USB_RIO500=m
> CONFIG_USB_BRLVGER=m
> CONFIG_USB_LCD=m
> CONFIG_USB_SPEEDTOUCH=m
>
> #
> # Bluetooth support
> #
> # CONFIG_BLUEZ is not set
>
> #
> # Kernel hacking
> #
> # CONFIG_ALPHA_LEGACY_START_ADDRESS is not set
> CONFIG_DEBUG_KERNEL=y
> CONFIG_MATHEMU=y
> # CONFIG_DEBUG_SLAB is not set
> CONFIG_MAGIC_SYSRQ=y
> # CONFIG_DEBUG_SPINLOCK is not set
> # CONFIG_DEBUG_RWLOCK is not set
> # CONFIG_DEBUG_SEMAPHORE is not set
>
> #
> # Security options
> #
> CONFIG_SECURITY_CAPABILITIES=y
>
> #
> # Library routines
> #
> CONFIG_CRC32=m
> CONFIG_ZLIB_INFLATE=m
> CONFIG_ZLIB_DEFLATE=m

2002-09-23 00:16:21

by Michel Eyckmans (MCE)

[permalink] [raw]
Subject: Re: Linux 2.5.38


> Trying to be a bit more timely about releases, especially since some
> people couldn't use 2.5.37 due to the X lockup that should hopefully
> be fixed (no idea _why_ that old bug only started to matter recently, the
> bug itself was several months old).

The boot time lock up, that I have indeed encountered intermittently ever
since switching to 2.5.3{01}, may indeed be gone, but the one where just
moving my mouse around locks things up in a matter of seconds hasn't.
This started somewhere in 2.5.3{234}, only the latter of which I was able
to compile for my box.

Someone recently reported having similar problems and fixing them by
disabling MTRR, but this cannot be the entire story since I never had it
enabled in the first place. No wonder, on a dual P5 machine...

By the way, 2.3.38 gives me this:

depmod: *** Unresolved symbols in /lib/modules/2.5.38/kernel/net/ipv4/netfilter/ipt_owner.o
depmod: find_task_by_pid

Regards,

MCE

2002-09-23 00:40:43

by Skip Ford

[permalink] [raw]
Subject: Re: Linux 2.5.38

Michel Eyckmans (MCE) wrote:
> By the way, 2.3.38 gives me this:
>
> depmod: *** Unresolved symbols in /lib/modules/2.5.38/kernel/net/ipv4/netfilter/ipt_owner.o
> depmod: find_task_by_pid


--- linux/kernel/ksyms.c~ Sun Sep 22 20:56:07 2002
+++ linux/kernel/ksyms.c Sun Sep 22 20:56:22 2002
@@ -606,6 +606,7 @@
EXPORT_SYMBOL(init_thread_union);

EXPORT_SYMBOL(tasklist_lock);
+EXPORT_SYMBOL(find_task_by_pid);
#if defined(CONFIG_SMP) && defined(__GENERIC_PER_CPU)
EXPORT_SYMBOL(__per_cpu_offset);
#endif


--
Skip

2002-09-23 01:40:26

by Peter Rival

[permalink] [raw]
Subject: Re: Linux 2.5.38

Jochen Friedrich wrote:

>Hi,
>
>sorry for the first post as Alexander Viro already posted a fix. Now, this
>is a real Alpha problem, it seems (it has been there in 2.5.37, as well):
>
>build fails on Alpha:
>
>
Patch below fixes the problem. Linus, please apply. Here's hoping Mozilla
doesn't blow up the patch; please let me know if it does and I'll try to create
a bk patch for this.

- Pete

diff -Nru a/arch/alpha/kernel/time.c b/arch/alpha/kernel/time.c
--- a/arch/alpha/kernel/time.c Sun Sep 22 08:01:47 2002
+++ b/arch/alpha/kernel/time.c Sun Sep 22 08:01:47 2002
@@ -57,6 +57,8 @@

spinlock_t rtc_lock = SPIN_LOCK_UNLOCKED;

+#define TICK_SIZE (tick_nsec / 1000)
+
/*
* Shift amount by which scaled_ticks_per_cycle is scaled. Shifting
* by 48 gives us 16 bits for HZ while keeping the accuracy good even
@@ -129,8 +131,8 @@
*/
if ((time_status & STA_UNSYNC) == 0
&& xtime.tv_sec > state.last_rtc_update + 660
- && xtime.tv_usec >= 500000 - ((unsigned) tick) / 2
- && xtime.tv_usec <= 500000 + ((unsigned) tick) / 2) {
+ && xtime.tv_nsec >= 500000 - ((unsigned) TICK_SIZE) / 2
+ && xtime.tv_nsec <= 500000 + ((unsigned) TICK_SIZE) / 2) {
int tmp = set_rtc_mmss(xtime.tv_sec);
state.last_rtc_update = xtime.tv_sec - (tmp ? 600 : 0);
}
@@ -365,7 +367,7 @@
year += 100;

xtime.tv_sec = mktime(year, mon, day, hour, min, sec);
- xtime.tv_usec = 0;
+ xtime.tv_nsec = 0;

if (HZ > (1<<16)) {
extern void __you_loose (void);
@@ -414,7 +416,7 @@

delta_cycles = rpcc() - state.last_time;
sec = xtime.tv_sec;
- usec = xtime.tv_usec;
+ usec = (xtime.tv_nsec / 1000);
partial_tick = state.partial_tick;
lost = jiffies - wall_jiffies;

@@ -485,7 +487,7 @@
}

xtime.tv_sec = sec;
- xtime.tv_usec = usec;
+ xtime.tv_nsec = (usec / 1000);
time_adjust = 0; /* stop active adjtime() */
time_status |= STA_UNSYNC;
time_maxerror = NTP_PHASE_LIMIT;
diff -Nru a/include/asm-alpha/hardirq.h b/include/asm-alpha/hardirq.h
--- a/include/asm-alpha/hardirq.h Sun Sep 22 08:01:47 2002
+++ b/include/asm-alpha/hardirq.h Sun Sep 22 08:01:47 2002
@@ -74,9 +74,12 @@

#define irq_enter() (preempt_count() += HARDIRQ_OFFSET)

+
#if CONFIG_PREEMPT
+#define in_atomic() (preempt_count() != kernel_locked())
# define IRQ_EXIT_OFFSET (HARDIRQ_OFFSET-1)
#else
+#define in_atomic() (preempt_count() != 0)
#define IRQ_EXIT_OFFSET HARDIRQ_OFFSET
# endif
#define irq_exit() \
diff -Nru a/include/asm-alpha/spinlock.h b/include/asm-alpha/spinlock.h
--- a/include/asm-alpha/spinlock.h Sun Sep 22 08:01:47 2002
+++ b/include/asm-alpha/spinlock.h Sun Sep 22 08:01:47 2002
@@ -100,6 +100,7 @@
#define RW_LOCK_UNLOCKED (rwlock_t) { 0, 0 }

#define rwlock_init(x) do { *(x) = RW_LOCK_UNLOCKED; } while(0)
+#define rwlock_is_locked(x) (*(volatile int *)(x) != 0)

#if CONFIG_DEBUG_RWLOCK
extern void _raw_write_lock(rwlock_t * lock);





2002-09-23 02:20:57

by Linus Torvalds

[permalink] [raw]
Subject: Re: Linux 2.5.38


On Mon, 23 Sep 2002, Michel Eyckmans (MCE) wrote:
>
> The boot time lock up, that I have indeed encountered intermittently ever
> since switching to 2.5.3{01}, may indeed be gone, but the one where just
> moving my mouse around locks things up in a matter of seconds hasn't.

That may just be due to the new mouse driver and/or input layer, which
went in some weeks ago. What kind of mouse (and if it is a PS/2 mouse, can
you get a loaner USB mouse to test with, for example?)

> Someone recently reported having similar problems and fixing them by
> disabling MTRR, but this cannot be the entire story since I never had it
> enabled in the first place. No wonder, on a dual P5 machine...

There was a separate MTRR atomicity problem that would cause extreme
slowdowns on SMP with MTRR enabled when X was started, because the MTRR
code would have re-entrancy problems and potentially leave the caches
disabled. That should have been fixed in 2.5.36.

Linus

2002-09-23 02:26:34

by Linus Torvalds

[permalink] [raw]
Subject: Re: Linux 2.5.38


On Sun, 22 Sep 2002, Peter Rival wrote:
>
> Patch below fixes the problem. Linus, please apply. Here's hoping Mozilla
> doesn't blow up the patch

It does (or something else does) - tabs have been space'ified.

What the hell is _wrong_ with mail client authors that they can't get
something as simple as keeping a file intact _correct_? Why do email
clients think they have to corrupt the input on something as simple as
plain 7-bit ascii (oe even 8-bit latin1, for that matter)? Silly buggers.

Please complain to the mozilla people.

Linus

2002-09-23 02:34:50

by Jeff Garzik

[permalink] [raw]
Subject: Re: Linux 2.5.38

Linus Torvalds wrote:
> On Sun, 22 Sep 2002, Peter Rival wrote:
>
>>Patch below fixes the problem. Linus, please apply. Here's hoping Mozilla
>>doesn't blow up the patch
>
>
> It does (or something else does) - tabs have been space'ified.
>
> What the hell is _wrong_ with mail client authors that they can't get
> something as simple as keeping a file intact _correct_? Why do email
> clients think they have to corrupt the input on something as simple as
> plain 7-bit ascii (oe even 8-bit latin1, for that matter)? Silly buggers.


I've been sending patches via Netscape Mail and Mozilla Mail for
years... inline has never ever worked, but attachments always work[1].
And if the attachments are detected to be text by the internal magic,
the attachments are properly marked text/plain and sent cleartext...

So, attach patches and make sure the patches don't have binary crud in
them, and you're fine.

Jeff


[1] always being defined as 99% not 100% ;-)

2002-09-23 12:48:04

by Clemens Schwaighofer

[permalink] [raw]
Subject: Re: Linux 2.5.38

On Sat, 21 Sep 2002, Linus Torvalds wrote:

in 2.5.38 same thing is broken as in 2.5.37. ACPI thing?

ld -m elf_i386 -e stext -T arch/i386/vmlinux.lds.s
arch/i386/kernel/head.o arch/i386/kernel/init_task.o init/built-in.o
--start-group arch/i386/kernel/built-in.o arch/i386/mm/built-in.o
arch/i386/mach-generic/built-in.o kernel/built-in.o mm/built-in.o
fs/built-in.o ipc/built-in.o security/built-in.o lib/lib.a
arch/i386/lib/lib.a drivers/built-in.o sound/built-in.o
arch/i386/math-emu/built-in.o arch/i386/pci/built-in.o net/built-in.o
--end-group -o vmlinux
arch/i386/kernel/built-in.o: In function `disconnect_bsp_APIC':
arch/i386/kernel/built-in.o(.text+0xc9e8): undefined reference to
`pic_mode'
arch/i386/kernel/built-in.o: In function `clear_IO_APIC':
arch/i386/kernel/built-in.o(.text+0xd26b): undefined reference to
`nr_ioapics'
arch/i386/kernel/built-in.o(.text+0xd2ae): undefined reference to
`nr_ioapics'
arch/i386/kernel/built-in.o: In function `IO_APIC_get_PCI_irq_vector':

[....]

drivers/built-in.o: In function
`quirk_via_ioapic':
drivers/built-in.o(.text.init+0x117b): undefined reference to `nr_ioapics'
arch/i386/pci/built-in.o: In function `pirq_enable_irq':
arch/i386/pci/built-in.o(.text+0x185f): undefined reference to
`mp_irq_entries'
arch/i386/pci/built-in.o: In function `pcibios_irq_init':
arch/i386/pci/built-in.o(.text.init+0x1296): undefined reference to
`mp_irq_entries'
arch/i386/pci/built-in.o: In function `pcibios_fixup_irqs':
arch/i386/pci/built-in.o(.text.init+0x1360): undefined reference to
`mp_irq_entries'
make: *** [vmlinux] Error 1

--
"Der Krieg ist ein Massaker von Leuten, die sich nicht kennen, zum
Nutzen von Leuten, die sich kennen, aber nicht massakrieren"
- Paul Val?ry (1871-1945)
mfg, Clemens Schwaighofer PIXELWINGS Medien GMBH
Kandlgasse 15/5, A-1070 Wien T: [+43 1] 524 58 50
JETZT NEU! MIT FEWA GEWASCHEN --> http://www.pixelwings.com

2002-09-23 21:59:11

by Jean Tourrilhes

[permalink] [raw]
Subject: Re: Linux 2.5.38 [PATCH] IrDA

On Mon, Sep 23, 2002 at 05:28:27PM +0200, Philipp Matthias Hahn wrote:
> Moin LKML, Jean!
>
> On Sat, Sep 21, 2002 at 09:34:18PM -0700, Linus Torvalds wrote:
> > Jean Tourrilhes <[email protected]>:
> > o More __FUNCTION__ cleanups for IrDA
>
> More to find at http://pint.pmhahn.de/pmhahn/misc/irda-2.5.38.diff
> since it is too large (228099 Bytes) for LKML.
>
> BYtE
> Philipp
>
> PS: The magic "vim" like was
> %s!__FUNCTION__\s*\(\n\s*\)\?"\([^"]*"\(\s*\n\s*"[^"]*"\)\?\)\(\s*[,)]\)!\1"%s\2, __FUNCTION__ \4!

Thanks a lot !
I've merged your patch with other __FUNCTION__ stuff I already
had, split into manageable chunks and sent the result to Jeff Garzik
for inclusion. I'll follow up until it gets into the kernel...
Regards,

Jean

2002-09-23 23:02:59

by Michel Eyckmans (MCE)

[permalink] [raw]
Subject: Re: Linux 2.5.38


> That may just be due to the new mouse driver and/or input layer, which
> went in some weeks ago. What kind of mouse

Yep, I've suspected this to be input related from the start.That would
fit the timing perfectly.

It's a plain old serial mouse, no PS/2. It works fine with gpm, only
X locks up. Or to be entirely accurate: X consistently locks up almost
immediately, whereas gpm survived all testing until now.

MCE
--
========================================================================
M. Eyckmans (MCE) Code of the Geeks v3.1 mce-at-pi-dot-be
GCS d+ s+:- a37 C+++$ UHLUASO+++$ P+ L+++ E--- W++ N+++ !o K w--- !O M--
V-- PS+ PE+ Y+ PGP- t--- !5 !X R- tv- b+ DI++ D-- G++ e+++ h+(*) !r y?
========================================================================

2002-09-23 23:16:03

by Linus Torvalds

[permalink] [raw]
Subject: Re: Linux 2.5.38


On Tue, 24 Sep 2002, Michel Eyckmans (MCE) wrote:
>
> It's a plain old serial mouse, no PS/2.

Ah, ok. That's fairly unusual these days, and probably hasn't gotten that
much testing.

Anyway, I'd really like to pinpoint that by having you try another mouse
(borrow a PS/2 or USB mouse from somebody), to make sure that it really is
mouse-related.. After that I can try to beat up on Vojtech.

Linus

2002-09-24 05:40:08

by Philipp Matthias Hahn

[permalink] [raw]
Subject: Re: Linux 2.5.38 [PATCH] IrDA

Moin LKML, Jean!

On Sat, Sep 21, 2002 at 09:34:18PM -0700, Linus Torvalds wrote:
> Jean Tourrilhes <[email protected]>:
> o More __FUNCTION__ cleanups for IrDA

More to find at http://pint.pmhahn.de/pmhahn/misc/irda-2.5.38.diff
since it is too large (228099 Bytes) for LKML.

BYtE
Philipp

PS: The magic "vim" like was
%s!__FUNCTION__\s*\(\n\s*\)\?"\([^"]*"\(\s*\n\s*"[^"]*"\)\?\)\(\s*[,)]\)!\1"%s\2, __FUNCTION__ \4!
--
/ / (_)__ __ ____ __ Philipp Hahn
/ /__/ / _ \/ // /\ \/ /
/____/_/_//_/\_,_/ /_/\_\ [email protected]

2002-09-24 12:49:35

by James Morris

[permalink] [raw]
Subject: [PATCH] export find_task_by_pid() for 2.5.38

On Mon, 23 Sep 2002, Michel Eyckmans (MCE) wrote:

> By the way, 2.3.38 gives me this:
>
> depmod: *** Unresolved symbols in /lib/modules/2.5.38/kernel/net/ipv4/netfilter/ipt_owner.o
> depmod: find_task_by_pid
>

Below is a patch which exports the function, which used to be an inline.
(This is also an issue for ip6t_owner).

- James
--
James Morris
<[email protected]>

diff -urN -X dontdiff linux-2.5.38.orig/kernel/Makefile linux-2.5.38.w1/kernel/Makefile
--- linux-2.5.38.orig/kernel/Makefile Tue Sep 24 19:23:03 2002
+++ linux-2.5.38.w1/kernel/Makefile Tue Sep 24 22:14:47 2002
@@ -3,7 +3,7 @@
#

export-objs = signal.o sys.o kmod.o context.o ksyms.o pm.o exec_domain.o \
- printk.o platform.o suspend.o dma.o
+ printk.o platform.o suspend.o dma.o pid.o

obj-y = sched.o fork.o exec_domain.o panic.o printk.o \
module.o exit.o itimer.o time.o softirq.o resource.o \
diff -urN -X dontdiff linux-2.5.38.orig/kernel/pid.c linux-2.5.38.w1/kernel/pid.c
--- linux-2.5.38.orig/kernel/pid.c Tue Sep 24 19:23:03 2002
+++ linux-2.5.38.w1/kernel/pid.c Tue Sep 24 22:23:56 2002
@@ -23,6 +23,7 @@
#include <linux/slab.h>
#include <linux/init.h>
#include <linux/bootmem.h>
+#include <linux/module.h>

#define PIDHASH_SIZE 4096
#define pid_hashfn(nr) ((nr >> 8) ^ nr) & (PIDHASH_SIZE - 1)
@@ -217,3 +218,5 @@
attach_pid(current, i, 0);
}
}
+
+EXPORT_SYMBOL(find_task_by_pid);

2002-09-24 22:39:05

by Michel Eyckmans (MCE)

[permalink] [raw]
Subject: Re: Linux 2.5.38


> Anyway, I'd really like to pinpoint that by having you try another mouse
> (borrow a PS/2 or USB mouse from somebody), to make sure that it really is
> mouse-related.. After that I can try to beat up on Vojtech.

I'd like to test other mice too, but I have nowhere to connect them to.
This box is 6 years old by now (and yet still going strong :-), so it
doesn't have all those post-modern connectors...

For completeness: very occasionally, X does survive an hour or so of
normal use. So much so that last night I even thought to have found a
solution by changing a mouse-related bit in my kernel config. But today
it locked up again, causing me to loose a whole bunch of mails in the
process. So I'm back to 2.5.31 once more.

I'm gonna try a non-smp 2.5.38 next, to see if that makes any difference.

MCE

2002-09-25 17:48:28

by Bill Davidsen

[permalink] [raw]
Subject: Re: Linux 2.5.38

On Wed, 25 Sep 2002, Michel Eyckmans (MCE) wrote:

>
> > Anyway, I'd really like to pinpoint that by having you try another mouse
> > (borrow a PS/2 or USB mouse from somebody), to make sure that it really is
> > mouse-related.. After that I can try to beat up on Vojtech.
>
> I'd like to test other mice too, but I have nowhere to connect them to.
> This box is 6 years old by now (and yet still going strong :-), so it
> doesn't have all those post-modern connectors...

Have you tried running without X and using the serial port for other
things, like ppp? The assumption is that this is a mouse issue, and I
haven't run 2.5.38 long enough to swear that it isn't, but it might also
be a serial issue. I would venture a guess that the major developers don't
use serial much for anything.

> For completeness: very occasionally, X does survive an hour or so of
> normal use. So much so that last night I even thought to have found a
> solution by changing a mouse-related bit in my kernel config. But today
> it locked up again, causing me to loose a whole bunch of mails in the
> process. So I'm back to 2.5.31 once more.
>
> I'm gonna try a non-smp 2.5.38 next, to see if that makes any difference.

Or booting with "noapic" if you don't already. Consider that a data point,
not a solution, I wish I wasn't running all my systems that way. Clearly
the performance impact of noapic is minimal, it just bugs me that after
all the work to balance the irq load many systems are not stable using
that feature.

--
bill davidsen <[email protected]>
CTO, TMR Associates, Inc
Doing interesting things with little computers since 1979.

2002-09-26 00:38:14

by Russell King

[permalink] [raw]
Subject: Re: Linux 2.5.38

On Wed, Sep 25, 2002 at 01:46:18PM -0400, Bill Davidsen wrote:
> Have you tried running without X and using the serial port for other
> things, like ppp? The assumption is that this is a mouse issue, and I
> haven't run 2.5.38 long enough to swear that it isn't, but it might also
> be a serial issue. I would venture a guess that the major developers don't
> use serial much for anything.

It could be serial, especially as my big change went in back in .28.
It would also be worth checking that the port is actually detected
by the kernel; the kernel messages will give that information.

--
Russell King ([email protected]) The developer of ARM Linux
http://www.arm.linux.org.uk/personal/aboutme.html

2002-09-26 20:35:09

by Rasmus Andersen

[permalink] [raw]
Subject: [PATCH] Re: Linux 2.5.38

On Sat, Sep 21, 2002 at 09:34:18PM -0700, Linus Torvalds wrote:
>
> Trying to be a bit more timely about releases, especially since some
> people couldn't use 2.5.37 due to the X lockup that should hopefully
> be fixed (no idea _why_ that old bug only started to matter recently, the
> bug itself was several months old).

This trivial patch fixes a trivial bug in drivers/cdrom/gscd.c:


--- linux-2.5.38/drivers/cdrom/gscd.c Sun Sep 22 06:24:58 2002
+++ linux-2.5.38-new/drivers/cdrom/gscd.c Thu Sep 26 22:38:11 2002
@@ -901,7 +901,7 @@
static struct gendisk gscd_disk = {
.major = MAJOR_NR,
.first_minor = 0,
- ,minor_shift = 0,
+ .minor_shift = 0,
.fops = &gscd_fops,
.major_name = "gscd"
};

Regards,
Rasmus


Attachments:
(No filename) (728.00 B)
(No filename) (232.00 B)
Download all attachments

2002-09-26 21:07:44

by Rasmus Andersen

[permalink] [raw]
Subject: [PATCH] Re: Linux 2.5.38

On Sat, Sep 21, 2002 at 09:34:18PM -0700, Linus Torvalds wrote:
>
> Trying to be a bit more timely about releases, especially since some
> people couldn't use 2.5.37 due to the X lockup that should hopefully
> be fixed (no idea _why_ that old bug only started to matter recently, the
> bug itself was several months old).

Two additional gendisk patches:


--- linux-2.5.38/drivers/cdrom/mcd.c Sun Sep 22 06:25:12 2002
+++ linux-2.5.38-new/drivers/cdrom/mcd.c Thu Sep 26 22:41:05 2002
@@ -227,7 +227,7 @@
.minor_shift = 0,
.major_name = "mcd",
.fops = &mcd_bdops,
- .flags = GENHD_FL_CD;
+ .flags = GENHD_FL_CD,
};

#ifndef MODULE



--- linux-2.5.38/drivers/cdrom/sonycd535.c Sun Sep 22 06:25:06 2002
+++ linux-2.5.38-new/drivers/cdrom/sonycd535.c Thu Sep 26 22:48:36 2002
@@ -1462,6 +1462,7 @@
.minor_shift = 0,
.fops = &cdu_fops,
.major_name = "cdu"
+};

/*
* Initialize the driver.


Regards,
Rasmus


Attachments:
(No filename) (931.00 B)
(No filename) (232.00 B)
Download all attachments