2002-09-30 07:41:40

by Jochen Friedrich

[permalink] [raw]
Subject: 2.3.39 compile errors on Alpha

Hi,

these are the errors i found in my log from a "make -k modules" on Alpha:

drivers/atm/atmtcp.c:

atmtcp.c:278: incompatible types in assignment

drivers/isdn/hardware/avm/b1dma.c:

b1dma.c:32: #error FIXME: driver requires 32-bit platform

drivers/md/lvm.c:

lvm.c:1: #error Broken until maintainers will sanitize kdev_t handling

drivers/md/lvm-snap.c:

lvm-snap.c:248: incompatible type for argument 1 of `block_size'

drivers/net/ethertap.c:

ethertap.c:347: initializer element is not computable at load time
ethertap.c:347: (near initialization for `dev_ethertap.ifindex')

drivers/serial/8250.c:

8250.c:106: `ASYNC_BOOT_AUTOCONF' undeclared here (not in a function)
8250.c:106: `ASYNC_SKIP_TEST' undeclared here (not in a function)
8250.c:106: initializer element is not constant
8250.c:106: (near initialization for `old_serial_port[0].flags')

drivers/usb/serial/whiteheat.c:

whiteheat.c: In function `firm_setup_port':
whiteheat.c:1030: `CMSPAR' undeclared (first use in this function)
whiteheat.c:1030: (Each undeclared identifier is reported only once
whiteheat.c:1030: for each function it appears in.)

drivers/video/pm3fb.c:

pm3fb.c:137: field `gen' has incomplete type

drivers/video/tridentfb.c:

tridentfb.c:64: field `gen' has incomplete type

sound/drivers/serial-u16550.c:

serial-u16550.c:156: field `buffer_timer' has incomplete type

I'll try to reboot the remaining mess and report how far it gets...

Cheers,
--jochen

#
# Automatically generated make config: don't edit
#
CONFIG_ALPHA=y
# CONFIG_UID16 is not set
# CONFIG_RWSEM_GENERIC_SPINLOCK is not set
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_GENERIC_ISA_DMA=y

#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y

#
# General setup
#
CONFIG_NET=y
CONFIG_SYSVIPC=y
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y

#
# Loadable module support
#
CONFIG_MODULES=y
CONFIG_MODVERSIONS=y
CONFIG_KMOD=y

#
# System setup
#
CONFIG_ALPHA_GENERIC=y
# CONFIG_ALPHA_ALCOR is not set
# CONFIG_ALPHA_XL is not set
# CONFIG_ALPHA_BOOK1 is not set
# CONFIG_ALPHA_AVANTI is not set
# CONFIG_ALPHA_CABRIOLET is not set
# CONFIG_ALPHA_DP264 is not set
# CONFIG_ALPHA_EB164 is not set
# CONFIG_ALPHA_EB64P is not set
# CONFIG_ALPHA_EB66 is not set
# CONFIG_ALPHA_EB66P is not set
# CONFIG_ALPHA_EIGER is not set
# CONFIG_ALPHA_JENSEN is not set
# CONFIG_ALPHA_LX164 is not set
# CONFIG_ALPHA_MIATA is not set
# CONFIG_ALPHA_MIKASA is not set
# CONFIG_ALPHA_NAUTILUS is not set
# CONFIG_ALPHA_NONAME is not set
# CONFIG_ALPHA_NORITAKE is not set
# CONFIG_ALPHA_PC164 is not set
# CONFIG_ALPHA_P2K is not set
# CONFIG_ALPHA_RAWHIDE is not set
# CONFIG_ALPHA_RUFFIAN is not set
# CONFIG_ALPHA_RX164 is not set
# CONFIG_ALPHA_SX164 is not set
# CONFIG_ALPHA_SABLE is not set
# CONFIG_ALPHA_SHARK is not set
# CONFIG_ALPHA_TAKARA is not set
# CONFIG_ALPHA_TITAN is not set
# CONFIG_ALPHA_WILDFIRE is not set
CONFIG_ISA=y
CONFIG_EISA=y
# CONFIG_SBUS is not set
# CONFIG_MCA is not set
CONFIG_PCI=y
CONFIG_ALPHA_BROKEN_IRQ_MASK=y
# CONFIG_SMP is not set
# CONFIG_DISCONTIGMEM is not set
# CONFIG_ALPHA_LARGE_VMALLOC is not set
CONFIG_PCI_NAMES=y
CONFIG_HOTPLUG=y

#
# PCMCIA/CardBus support
#
# CONFIG_PCMCIA is not set
CONFIG_KCORE_ELF=y
# CONFIG_KCORE_AOUT is not set
CONFIG_SRM_ENV=m
CONFIG_BINFMT_AOUT=m
CONFIG_OSF4_COMPAT=y
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_MISC=m
CONFIG_BINFMT_EM86=m

#
# Parallel port support
#
CONFIG_PARPORT=m
CONFIG_PARPORT_PC=m
CONFIG_PARPORT_PC_CML1=m
# CONFIG_PARPORT_SERIAL is not set
CONFIG_PARPORT_PC_FIFO=y
CONFIG_PARPORT_PC_SUPERIO=y
# CONFIG_PARPORT_AMIGA is not set
# CONFIG_PARPORT_MFC3 is not set
# CONFIG_PARPORT_ATARI is not set
# CONFIG_PARPORT_GSC is not set
# CONFIG_PARPORT_SUNBPP is not set
# CONFIG_PARPORT_OTHER is not set
CONFIG_PARPORT_1284=y

#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set

#
# Plug and Play configuration
#
CONFIG_PNP=m
CONFIG_ISAPNP=m
# CONFIG_PNPBIOS is not set

#
# Block devices
#
CONFIG_BLK_DEV_FD=m
# CONFIG_BLK_DEV_XD is not set
# CONFIG_PARIDE is not set
CONFIG_BLK_CPQ_DA=m
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_CISS_SCSI_TAPE is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_NBD=m
CONFIG_BLK_DEV_RAM=m
CONFIG_BLK_DEV_RAM_SIZE=4096
# CONFIG_BLK_DEV_INITRD is not set

#
# Multi-device support (RAID and LVM)
#
CONFIG_MD=y
CONFIG_BLK_DEV_MD=m
CONFIG_MD_LINEAR=m
CONFIG_MD_RAID0=m
CONFIG_MD_RAID1=m
CONFIG_MD_RAID5=m
# CONFIG_MD_MULTIPATH is not set
CONFIG_BLK_DEV_LVM=m

#
# ATA/ATAPI/MFM/RLL support
#
# CONFIG_IDE is not set
# CONFIG_BLK_DEV_HD is not set

#
# SCSI support
#
CONFIG_SCSI=y

#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
CONFIG_SD_EXTRA_DEVS=40
CONFIG_CHR_DEV_ST=m
# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=m
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_SR_EXTRA_DEVS=2
CONFIG_CHR_DEV_SG=m

#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
CONFIG_SCSI_MULTI_LUN=y
# CONFIG_SCSI_REPORT_LUNS is not set
CONFIG_SCSI_CONSTANTS=y
# CONFIG_SCSI_LOGGING is not set

#
# SCSI low-level drivers
#
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_7000FASST is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AHA152X is not set
# CONFIG_SCSI_AHA1542 is not set
# CONFIG_SCSI_AHA1740 is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_IN2000 is not set
# CONFIG_SCSI_AM53C974 is not set
# CONFIG_SCSI_MEGARAID is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_CPQFCTS is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_DTC3280 is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_EATA_DMA is not set
# CONFIG_SCSI_EATA_PIO is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_GENERIC_NCR5380 is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
CONFIG_SCSI_PPA=m
CONFIG_SCSI_IMM=m
# CONFIG_SCSI_IZIP_EPP16 is not set
# CONFIG_SCSI_IZIP_SLOW_CTR is not set
# CONFIG_SCSI_NCR53C406A is not set
# CONFIG_SCSI_NCR53C7xx is not set
CONFIG_SCSI_SYM53C8XX_2=m
CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
# CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set
CONFIG_SCSI_NCR53C8XX=y
# CONFIG_SCSI_SYM53C8XX is not set
CONFIG_SCSI_NCR53C8XX_DEFAULT_TAGS=8
CONFIG_SCSI_NCR53C8XX_MAX_TAGS=32
CONFIG_SCSI_NCR53C8XX_SYNC=20
# CONFIG_SCSI_NCR53C8XX_PROFILE is not set
# CONFIG_SCSI_NCR53C8XX_IOMAPPED is not set
# CONFIG_SCSI_NCR53C8XX_SYMBIOS_COMPAT is not set
# CONFIG_SCSI_PAS16 is not set
# CONFIG_SCSI_PCI2000 is not set
# CONFIG_SCSI_PCI2220I is not set
# CONFIG_SCSI_PSI240I is not set
# CONFIG_SCSI_QLOGIC_FAS is not set
# CONFIG_SCSI_QLOGIC_ISP is not set
# CONFIG_SCSI_QLOGIC_FC is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_SIM710 is not set
# CONFIG_SCSI_SYM53C416 is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_T128 is not set
# CONFIG_SCSI_U14_34F is not set
# CONFIG_SCSI_DEBUG is not set

#
# Fusion MPT device support
#
# CONFIG_FUSION is not set
# CONFIG_FUSION_BOOT is not set
# CONFIG_FUSION_ISENSE is not set
# CONFIG_FUSION_CTL is not set
# CONFIG_FUSION_LAN is not set

#
# Networking options
#
CONFIG_PACKET=m
CONFIG_PACKET_MMAP=y
CONFIG_NETLINK_DEV=m
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
CONFIG_FILTER=y
CONFIG_UNIX=y
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_FWMARK=y
CONFIG_IP_ROUTE_NAT=y
CONFIG_IP_ROUTE_MULTIPATH=y
CONFIG_IP_ROUTE_TOS=y
CONFIG_IP_ROUTE_VERBOSE=y
CONFIG_IP_ROUTE_LARGE_TABLES=y
# CONFIG_IP_PNP is not set
CONFIG_NET_IPIP=m
CONFIG_NET_IPGRE=m
CONFIG_NET_IPGRE_BROADCAST=y
CONFIG_IP_MROUTE=y
CONFIG_IP_PIMSM_V1=y
CONFIG_IP_PIMSM_V2=y
CONFIG_ARPD=y
CONFIG_INET_ECN=y
CONFIG_SYN_COOKIES=y

#
# IP: Netfilter Configuration
#
CONFIG_IP_NF_CONNTRACK=m
CONFIG_IP_NF_FTP=m
CONFIG_IP_NF_IRC=m
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_LIMIT=m
CONFIG_IP_NF_MATCH_MAC=m
CONFIG_IP_NF_MATCH_PKTTYPE=m
CONFIG_IP_NF_MATCH_MARK=m
CONFIG_IP_NF_MATCH_MULTIPORT=m
CONFIG_IP_NF_MATCH_TOS=m
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_DSCP=m
CONFIG_IP_NF_MATCH_AH_ESP=m
CONFIG_IP_NF_MATCH_LENGTH=m
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_MATCH_TCPMSS=m
CONFIG_IP_NF_MATCH_HELPER=m
CONFIG_IP_NF_MATCH_STATE=m
CONFIG_IP_NF_MATCH_CONNTRACK=m
CONFIG_IP_NF_MATCH_UNCLEAN=m
CONFIG_IP_NF_MATCH_OWNER=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_MIRROR=m
CONFIG_IP_NF_NAT=m
CONFIG_IP_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_REDIRECT=m
# CONFIG_IP_NF_NAT_LOCAL is not set
CONFIG_IP_NF_NAT_SNMP_BASIC=m
CONFIG_IP_NF_NAT_IRC=m
CONFIG_IP_NF_NAT_FTP=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_TOS=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_DSCP=m
CONFIG_IP_NF_TARGET_MARK=m
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_IP_NF_TARGET_TCPMSS=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_COMPAT_IPCHAINS=m
CONFIG_IP_NF_NAT_NEEDED=y
CONFIG_IP_NF_COMPAT_IPFWADM=m
CONFIG_IP_NF_NAT_NEEDED=y
CONFIG_IPV6=m

#
# IPv6: Netfilter Configuration
#
CONFIG_IP6_NF_QUEUE=m
CONFIG_IP6_NF_IPTABLES=m
CONFIG_IP6_NF_MATCH_LIMIT=m
CONFIG_IP6_NF_MATCH_MAC=m
CONFIG_IP6_NF_MATCH_MULTIPORT=m
CONFIG_IP6_NF_MATCH_OWNER=m
CONFIG_IP6_NF_MATCH_MARK=m
CONFIG_IP6_NF_MATCH_LENGTH=m
CONFIG_IP6_NF_MATCH_EUI64=m
CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_LOG=m
CONFIG_IP6_NF_MANGLE=m
CONFIG_IP6_NF_TARGET_MARK=m

#
# SCTP Configuration (EXPERIMENTAL)
#
CONFIG_IPV6_SCTP__=m
CONFIG_IP_SCTP=m
# CONFIG_SCTP_ADLER32 is not set
# CONFIG_SCTP_DBG_MSG is not set
# CONFIG_SCTP_DBG_OBJCNT is not set
CONFIG_ATM=y
CONFIG_ATM_CLIP=y
CONFIG_ATM_CLIP_NO_ICMP=y
CONFIG_ATM_LANE=m
CONFIG_ATM_MPOA=m
CONFIG_VLAN_8021Q=m
CONFIG_LLC=y
CONFIG_LLC_UI=m
CONFIG_IPX=m
CONFIG_IPX_INTERN=y
CONFIG_ATALK=m
# CONFIG_DEV_APPLETALK is not set
CONFIG_DECNET=m
CONFIG_DECNET_SIOCGIFCONF=y
CONFIG_DECNET_ROUTER=y
CONFIG_DECNET_ROUTE_FWMARK=y
CONFIG_BRIDGE=m
CONFIG_BRIDGE_NF_EBTABLES=m
CONFIG_BRIDGE_EBT_T_FILTER=m
CONFIG_BRIDGE_EBT_T_NAT=m
CONFIG_BRIDGE_EBT_BROUTE=m
CONFIG_BRIDGE_EBT_LOG=m
CONFIG_BRIDGE_EBT_IPF=m
CONFIG_BRIDGE_EBT_ARPF=m
CONFIG_BRIDGE_EBT_VLANF=m
CONFIG_BRIDGE_EBT_MARKF=m
CONFIG_BRIDGE_EBT_SNAT=m
CONFIG_BRIDGE_EBT_DNAT=m
CONFIG_BRIDGE_EBT_REDIRECT=m
CONFIG_BRIDGE_EBT_MARK_T=m
CONFIG_X25=m
CONFIG_LAPB=m
# CONFIG_NET_DIVERT is not set
CONFIG_ECONET=m
CONFIG_ECONET_AUNUDP=y
CONFIG_ECONET_NATIVE=y
CONFIG_WAN_ROUTER=m
# CONFIG_NET_FASTROUTE is not set
# CONFIG_NET_HW_FLOWCONTROL is not set

#
# QoS and/or fair queueing
#
CONFIG_NET_SCHED=y
CONFIG_NET_SCH_CBQ=m
CONFIG_NET_SCH_HTB=m
CONFIG_NET_SCH_CSZ=m
CONFIG_NET_SCH_ATM=y
CONFIG_NET_SCH_PRIO=m
CONFIG_NET_SCH_RED=m
CONFIG_NET_SCH_SFQ=m
CONFIG_NET_SCH_TEQL=m
CONFIG_NET_SCH_TBF=m
CONFIG_NET_SCH_GRED=m
CONFIG_NET_SCH_DSMARK=m
CONFIG_NET_SCH_INGRESS=m
CONFIG_NET_QOS=y
CONFIG_NET_ESTIMATOR=y
CONFIG_NET_CLS=y
CONFIG_NET_CLS_TCINDEX=m
CONFIG_NET_CLS_ROUTE4=m
CONFIG_NET_CLS_ROUTE=y
CONFIG_NET_CLS_FW=m
CONFIG_NET_CLS_U32=m
CONFIG_NET_CLS_RSVP=m
CONFIG_NET_CLS_RSVP6=m
CONFIG_NET_CLS_POLICE=y

#
# Network device support
#
CONFIG_NETDEVICES=y

#
# ARCnet devices
#
# CONFIG_ARCNET is not set
CONFIG_DUMMY=m
CONFIG_BONDING=m
CONFIG_EQUALIZER=m
CONFIG_TUN=m
CONFIG_ETHERTAP=m
# CONFIG_NET_SB1000 is not set

#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
# CONFIG_SUNLANCE is not set
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNBMAC is not set
# CONFIG_SUNQE is not set
# CONFIG_SUNGEM is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_LANCE is not set
# CONFIG_NET_VENDOR_SMC is not set
# CONFIG_NET_VENDOR_RACAL is not set
# CONFIG_AT1700 is not set
# CONFIG_DEPCA is not set
# CONFIG_HP100 is not set
# CONFIG_NET_ISA is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_AC3200 is not set
# CONFIG_APRICOT is not set
# CONFIG_CS89x0 is not set
# CONFIG_DGRS is not set
# CONFIG_EEPRO100 is not set
# CONFIG_E100 is not set
# CONFIG_LNE390 is not set
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
# CONFIG_NE2K_PCI is not set
# CONFIG_NE3210 is not set
# CONFIG_ES3210 is not set
# CONFIG_8139CP is not set
# CONFIG_8139TOO is not set
# CONFIG_8139TOO_PIO is not set
# CONFIG_8139TOO_TUNE_TWISTER is not set
# CONFIG_8139TOO_8129 is not set
# CONFIG_8139_OLD_RX_RESET is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_SUNDANCE_MMIO is not set
# CONFIG_TLAN is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_VIA_RHINE_MMIO is not set
# CONFIG_NET_POCKET is not set

#
# Ethernet (1000 Mbit)
#
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_E1000_NAPI is not set
# CONFIG_MYRI_SBUS is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_SK98LIN is not set
# CONFIG_TIGON3 is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
CONFIG_PLIP=m
CONFIG_PPP=m
CONFIG_PPP_MULTILINK=y
# CONFIG_PPP_FILTER is not set
CONFIG_PPP_ASYNC=m
CONFIG_PPP_SYNC_TTY=m
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_BSDCOMP=m
CONFIG_PPPOE=m
CONFIG_PPPOATM=m
CONFIG_SLIP=m
CONFIG_SLIP_COMPRESSED=y
CONFIG_SLIP_SMART=y
CONFIG_SLIP_MODE_SLIP6=y

#
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set

#
# Token Ring devices
#
CONFIG_TR=y
CONFIG_IBMTR=m
CONFIG_IBMOL=m
CONFIG_IBMLS=m
CONFIG_3C359=m
CONFIG_TMS380TR=m
CONFIG_TMSPCI=m
CONFIG_TMSISA=m
CONFIG_ABYSS=m
# CONFIG_MADGEMC is not set
# CONFIG_SMCTR is not set
# CONFIG_NET_FC is not set
# CONFIG_RCPCI is not set
# CONFIG_SHAPER is not set

#
# Wan interfaces
#
CONFIG_WAN=y
# CONFIG_HOSTESS_SV11 is not set
# CONFIG_COSA is not set
# CONFIG_COMX is not set
# CONFIG_DSCC4 is not set
# CONFIG_LANMEDIA is not set
# CONFIG_SEALEVEL_4021 is not set
# CONFIG_SYNCLINK_SYNCPPP is not set
CONFIG_HDLC=m
CONFIG_HDLC_RAW=y
CONFIG_HDLC_CISCO=y
# CONFIG_HDLC_FR is not set
CONFIG_HDLC_PPP=y
CONFIG_HDLC_X25=y
CONFIG_PC300=m
# CONFIG_PC300_MLPPP is not set
CONFIG_N2=m
CONFIG_C101=m
# CONFIG_FARSYNC is not set
# CONFIG_HDLC_DEBUG_PKT is not set
# CONFIG_HDLC_DEBUG_HARD_HEADER is not set
# CONFIG_HDLC_DEBUG_ECN is not set
# CONFIG_HDLC_DEBUG_RINGS is not set
# CONFIG_DLCI is not set
# CONFIG_WAN_ROUTER_DRIVERS is not set
CONFIG_LAPBETHER=m
CONFIG_X25_ASY=m

#
# Tulip family network device support
#
CONFIG_NET_TULIP=y
CONFIG_DE2104X=m
CONFIG_TULIP=m
# CONFIG_TULIP_MWI is not set
# CONFIG_TULIP_MMIO is not set
CONFIG_DE4X5=m
# CONFIG_WINBOND_840 is not set
# CONFIG_DM9102 is not set

#
# ATM drivers
#
CONFIG_ATM_TCP=m
# CONFIG_ATM_LANAI is not set
# CONFIG_ATM_ENI is not set
# CONFIG_ATM_FIRESTREAM is not set
# CONFIG_ATM_ZATM is not set
# CONFIG_ATM_NICSTAR is not set
# CONFIG_ATM_IDT77252 is not set
# CONFIG_ATM_AMBASSADOR is not set
# CONFIG_ATM_HORIZON is not set
# CONFIG_ATM_IA is not set
# CONFIG_ATM_FORE200E_MAYBE is not set

#
# Amateur Radio support
#
# CONFIG_HAMRADIO is not set

#
# ISDN subsystem
#
CONFIG_ISDN_BOOL=y

#
# Old ISDN4Linux
#
CONFIG_ISDN=m
CONFIG_ISDN_PPP=y
CONFIG_ISDN_PPP_VJ=y
CONFIG_ISDN_MPP=y
CONFIG_ISDN_PPP_BSDCOMP=m
CONFIG_ISDN_AUDIO=y
CONFIG_ISDN_TTY_FAX=y
CONFIG_ISDN_X25=y

#
# ISDN feature submodules
#
CONFIG_ISDN_DRV_LOOP=m
CONFIG_ISDN_DIVERSION=m

#
# CAPI subsystem
#
CONFIG_ISDN_CAPI=m
CONFIG_ISDN_DRV_AVMB1_VERBOSE_REASON=y
CONFIG_ISDN_CAPI_MIDDLEWARE=y
CONFIG_ISDN_CAPI_CAPI20=m
CONFIG_ISDN_CAPI_CAPIFS_BOOL=y
CONFIG_ISDN_CAPI_CAPIFS=m
CONFIG_ISDN_CAPI_CAPIDRV=m

#
# CAPI hardware drivers
#

#
# Active AVM cards
#
CONFIG_CAPI_AVM=y
# CONFIG_ISDN_DRV_AVMB1_B1ISA is not set
CONFIG_ISDN_DRV_AVMB1_B1PCI=m
# CONFIG_ISDN_DRV_AVMB1_B1PCIV4 is not set
# CONFIG_ISDN_DRV_AVMB1_T1ISA is not set
# CONFIG_ISDN_DRV_AVMB1_B1PCMCIA is not set
# CONFIG_ISDN_DRV_AVMB1_AVM_CS is not set
# CONFIG_ISDN_DRV_AVMB1_T1PCI is not set
# CONFIG_ISDN_DRV_AVMB1_C4 is not set

#
# ISDN4Linux hardware drivers
#

#
# Passive cards
#
CONFIG_ISDN_DRV_HISAX=m

#
# D-channel protocol features
#
CONFIG_HISAX_EURO=y
CONFIG_DE_AOC=y
# CONFIG_HISAX_NO_SENDCOMPLETE is not set
# CONFIG_HISAX_NO_LLC is not set
# CONFIG_HISAX_NO_KEYPAD is not set
# CONFIG_HISAX_1TR6 is not set
# CONFIG_HISAX_NI1 is not set
CONFIG_HISAX_MAX_CARDS=8

#
# HiSax supported cards
#
# CONFIG_HISAX_16_0 is not set
# CONFIG_HISAX_16_3 is not set
# CONFIG_HISAX_TELESPCI is not set
# CONFIG_HISAX_S0BOX is not set
CONFIG_HISAX_AVM_A1=y
# CONFIG_HISAX_FRITZPCI is not set
# CONFIG_HISAX_AVM_A1_PCMCIA is not set
# CONFIG_HISAX_ELSA is not set
# CONFIG_HISAX_IX1MICROR2 is not set
# CONFIG_HISAX_DIEHLDIVA is not set
# CONFIG_HISAX_ASUSCOM is not set
# CONFIG_HISAX_TELEINT is not set
# CONFIG_HISAX_HFCS is not set
# CONFIG_HISAX_SEDLBAUER is not set
# CONFIG_HISAX_SPORTSTER is not set
# CONFIG_HISAX_MIC is not set
# CONFIG_HISAX_NETJET is not set
# CONFIG_HISAX_NETJET_U is not set
# CONFIG_HISAX_NICCY is not set
# CONFIG_HISAX_ISURF is not set
# CONFIG_HISAX_HSTSAPHIR is not set
# CONFIG_HISAX_BKM_A4T is not set
# CONFIG_HISAX_SCT_QUADRO is not set
# CONFIG_HISAX_GAZEL is not set
# CONFIG_HISAX_HFC_PCI is not set
# CONFIG_HISAX_W6692 is not set
# CONFIG_HISAX_HFC_SX is not set
# CONFIG_HISAX_ENTERNOW_PCI is not set
# CONFIG_HISAX_DEBUG is not set
# CONFIG_HISAX_SEDLBAUER_CS is not set
# CONFIG_HISAX_ELSA_CS is not set
# CONFIG_HISAX_AVM_A1_CS is not set
# CONFIG_HISAX_ST5481 is not set
# CONFIG_HISAX_FRITZ_PCIPNP is not set
CONFIG_HISAX_FRITZ_CLASSIC=m
# CONFIG_HISAX_HFCPCI is not set

#
# Active cards
#
# CONFIG_ISDN_DRV_ICN is not set
# CONFIG_ISDN_DRV_PCBIT is not set
# CONFIG_ISDN_DRV_SC is not set
# CONFIG_ISDN_DRV_ACT2000 is not set
# CONFIG_ISDN_DRV_EICON is not set
# CONFIG_ISDN_DRV_TPAM is not set
# CONFIG_HYSDN is not set
# CONFIG_HYSDN_CAPI is not set

#
# Old CD-ROM drivers (not SCSI, not IDE)
#
# CONFIG_CD_NO_IDESCSI is not set

#
# Input device support
#
CONFIG_INPUT=y

#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=m
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_TSDEV is not set
CONFIG_INPUT_EVDEV=m
# CONFIG_INPUT_EVBUG is not set

#
# Input I/O drivers
#
# CONFIG_GAMEPORT is not set
CONFIG_SOUND_GAMEPORT=y
# CONFIG_GAMEPORT_NS558 is not set
# CONFIG_GAMEPORT_L4 is not set
# CONFIG_GAMEPORT_EMU10K1 is not set
# CONFIG_GAMEPORT_VORTEX is not set
# CONFIG_GAMEPORT_FM801 is not set
# CONFIG_GAMEPORT_CS461x is not set
CONFIG_SERIO=m
CONFIG_SERIO_I8042=m
CONFIG_SERIO_SERPORT=m
CONFIG_SERIO_CT82C710=m
CONFIG_SERIO_PARKBD=m

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=m
CONFIG_KEYBOARD_SUNKBD=m
CONFIG_KEYBOARD_XTKBD=m
CONFIG_KEYBOARD_NEWTON=m
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=m
CONFIG_MOUSE_SERIAL=m
CONFIG_MOUSE_INPORT=m
# CONFIG_MOUSE_ATIXL is not set
CONFIG_MOUSE_LOGIBM=m
CONFIG_MOUSE_PC110PAD=m
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_JOYSTICK_ANALOG is not set
# CONFIG_JOYSTICK_A3D is not set
# CONFIG_JOYSTICK_ADI is not set
# CONFIG_JOYSTICK_COBRA is not set
# CONFIG_JOYSTICK_GF2K is not set
# CONFIG_JOYSTICK_GRIP is not set
# CONFIG_JOYSTICK_GRIP_MP is not set
# CONFIG_JOYSTICK_GUILLEMOT is not set
# CONFIG_JOYSTICK_INTERACT is not set
# CONFIG_JOYSTICK_SIDEWINDER is not set
# CONFIG_JOYSTICK_TMDC is not set
# CONFIG_JOYSTICK_IFORCE is not set
# CONFIG_JOYSTICK_WARRIOR is not set
# CONFIG_JOYSTICK_MAGELLAN is not set
# CONFIG_JOYSTICK_SPACEORB is not set
# CONFIG_JOYSTICK_SPACEBALL is not set
# CONFIG_JOYSTICK_STINGER is not set
# CONFIG_JOYSTICK_TWIDDLER is not set
# CONFIG_JOYSTICK_DB9 is not set
# CONFIG_JOYSTICK_GAMECON is not set
# CONFIG_JOYSTICK_TURBOGRAFX is not set
# CONFIG_INPUT_JOYDUMP is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_TOUCHSCREEN_GUNZE is not set
CONFIG_INPUT_MISC=y
# CONFIG_INPUT_PCSPKR is not set
# CONFIG_INPUT_UINPUT is not set

#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_SERIAL_NONSTANDARD is not set

#
# Serial drivers
#
CONFIG_SERIAL_8250=m
# CONFIG_SERIAL_8250_CONSOLE is not set
# CONFIG_SERIAL_8250_CS is not set
CONFIG_SERIAL_8250_EXTENDED=y
# CONFIG_SERIAL_8250_MANY_PORTS is not set
CONFIG_SERIAL_8250_SHARE_IRQ=y
# CONFIG_SERIAL_8250_DETECT_IRQ is not set
# CONFIG_SERIAL_8250_MULTIPORT is not set
# CONFIG_SERIAL_8250_RSA is not set

#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=m
CONFIG_UNIX98_PTYS=y
CONFIG_UNIX98_PTY_COUNT=256
CONFIG_PRINTER=m
# CONFIG_LP_CONSOLE is not set
# CONFIG_PPDEV is not set

#
# I2C support
#
# CONFIG_I2C is not set

#
# Mice
#
# CONFIG_BUSMOUSE is not set
# CONFIG_QIC02_TAPE is not set

#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
# CONFIG_NVRAM is not set
# CONFIG_RTC is not set
CONFIG_GEN_RTC=m
CONFIG_GEN_RTC_X=y
# CONFIG_DTLK is not set
CONFIG_R3964=m
CONFIG_APPLICOM=m

#
# Ftape, the floppy tape device driver
#
# CONFIG_FTAPE is not set
# CONFIG_AGP is not set
# CONFIG_DRM is not set
CONFIG_RAW_DRIVER=m

#
# Multimedia devices
#
CONFIG_VIDEO_DEV=m

#
# Video For Linux
#
# CONFIG_VIDEO_PROC_FS is not set

#
# Video Adapters
#
# CONFIG_VIDEO_PMS is not set
# CONFIG_VIDEO_BWQCAM is not set
# CONFIG_VIDEO_CQCAM is not set
# CONFIG_VIDEO_W9966 is not set
# CONFIG_VIDEO_CPIA is not set
# CONFIG_VIDEO_SAA5249 is not set
# CONFIG_TUNER_3036 is not set
# CONFIG_VIDEO_STRADIS is not set
# CONFIG_VIDEO_ZORAN is not set
# CONFIG_VIDEO_ZORAN_BUZ is not set
# CONFIG_VIDEO_ZORAN_DC10 is not set
# CONFIG_VIDEO_ZORAN_LML33 is not set
# CONFIG_VIDEO_ZR36120 is not set
# CONFIG_VIDEO_MEYE is not set

#
# Radio Adapters
#
# CONFIG_RADIO_CADET is not set
# CONFIG_RADIO_RTRACK is not set
# CONFIG_RADIO_RTRACK2 is not set
# CONFIG_RADIO_AZTECH is not set
# CONFIG_RADIO_GEMTEK is not set
# CONFIG_RADIO_GEMTEK_PCI is not set
# CONFIG_RADIO_MAXIRADIO is not set
# CONFIG_RADIO_MAESTRO is not set
# CONFIG_RADIO_MIROPCM20 is not set
# CONFIG_RADIO_MIROPCM20_RDS is not set
# CONFIG_RADIO_SF16FMI is not set
# CONFIG_RADIO_TERRATEC is not set
# CONFIG_RADIO_TRUST is not set
# CONFIG_RADIO_TYPHOON is not set
# CONFIG_RADIO_ZOLTRIX is not set

#
# File systems
#
# CONFIG_QUOTA is not set
# CONFIG_QFMT_V1 is not set
# CONFIG_QFMT_V2 is not set
CONFIG_AUTOFS_FS=m
CONFIG_AUTOFS4_FS=m
CONFIG_REISERFS_FS=m
# CONFIG_REISERFS_CHECK is not set
# CONFIG_REISERFS_PROC_INFO is not set
CONFIG_ADFS_FS=m
# CONFIG_ADFS_FS_RW is not set
CONFIG_AFFS_FS=m
CONFIG_HFS_FS=m
CONFIG_BFS_FS=m
CONFIG_EXT3_FS=y
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
# CONFIG_UMSDOS_FS is not set
CONFIG_VFAT_FS=m
CONFIG_EFS_FS=m
# CONFIG_JFFS_FS is not set
# CONFIG_JFFS2_FS is not set
CONFIG_CRAMFS=m
CONFIG_TMPFS=y
CONFIG_RAMFS=y
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
# CONFIG_ZISOFS is not set
CONFIG_JFS_FS=m
# CONFIG_JFS_DEBUG is not set
# CONFIG_JFS_STATISTICS is not set
CONFIG_MINIX_FS=m
CONFIG_VXFS_FS=m
CONFIG_NTFS_FS=m
# CONFIG_NTFS_DEBUG is not set
# CONFIG_NTFS_RW is not set
CONFIG_HPFS_FS=m
CONFIG_PROC_FS=y
CONFIG_DEVFS_FS=y
CONFIG_DEVFS_MOUNT=y
# CONFIG_DEVFS_DEBUG is not set
CONFIG_DEVPTS_FS=y
CONFIG_QNX4FS_FS=m
# CONFIG_QNX4FS_RW is not set
CONFIG_ROMFS_FS=m
CONFIG_EXT2_FS=y
CONFIG_SYSV_FS=m
CONFIG_UDF_FS=m
# CONFIG_UDF_RW is not set
CONFIG_UFS_FS=m
# CONFIG_UFS_FS_WRITE is not set
CONFIG_XFS_FS=m
# CONFIG_XFS_RT is not set
# CONFIG_XFS_QUOTA is not set

#
# Network File Systems
#
CONFIG_CODA_FS=m
# CONFIG_INTERMEZZO_FS is not set
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
# CONFIG_ROOT_NFS is not set
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
# CONFIG_NFSD_TCP is not set
CONFIG_SUNRPC=m
CONFIG_LOCKD=m
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
CONFIG_SMB_FS=m
# CONFIG_SMB_NLS_DEFAULT is not set
CONFIG_NCP_FS=m
CONFIG_NCPFS_PACKET_SIGNING=y
CONFIG_NCPFS_IOCTL_LOCKING=y
CONFIG_NCPFS_STRONG=y
CONFIG_NCPFS_NFS_NS=y
CONFIG_NCPFS_OS2_NS=y
CONFIG_NCPFS_SMALLDOS=y
CONFIG_NCPFS_NLS=y
CONFIG_NCPFS_EXTRAS=y
# CONFIG_ZISOFS_FS is not set

#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
CONFIG_ACORN_PARTITION=y
CONFIG_ACORN_PARTITION_ICS=y
CONFIG_ACORN_PARTITION_ADFS=y
CONFIG_ACORN_PARTITION_POWERTEC=y
CONFIG_ACORN_PARTITION_RISCIX=y
CONFIG_OSF_PARTITION=y
CONFIG_AMIGA_PARTITION=y
CONFIG_ATARI_PARTITION=y
CONFIG_MAC_PARTITION=y
CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
# CONFIG_MINIX_SUBPARTITION is not set
CONFIG_SOLARIS_X86_PARTITION=y
CONFIG_UNIXWARE_DISKLABEL=y
# CONFIG_LDM_PARTITION is not set
CONFIG_SGI_PARTITION=y
# CONFIG_ULTRIX_PARTITION is not set
CONFIG_SUN_PARTITION=y
# CONFIG_EFI_PARTITION is not set
CONFIG_SMB_NLS=y
CONFIG_NLS=y

#
# Native Language Support
#
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=m
CONFIG_NLS_CODEPAGE_737=m
CONFIG_NLS_CODEPAGE_775=m
CONFIG_NLS_CODEPAGE_850=m
CONFIG_NLS_CODEPAGE_852=m
CONFIG_NLS_CODEPAGE_855=m
CONFIG_NLS_CODEPAGE_857=m
CONFIG_NLS_CODEPAGE_860=m
CONFIG_NLS_CODEPAGE_861=m
CONFIG_NLS_CODEPAGE_862=m
CONFIG_NLS_CODEPAGE_863=m
CONFIG_NLS_CODEPAGE_864=m
CONFIG_NLS_CODEPAGE_865=m
CONFIG_NLS_CODEPAGE_866=m
CONFIG_NLS_CODEPAGE_869=m
CONFIG_NLS_CODEPAGE_936=m
CONFIG_NLS_CODEPAGE_950=m
CONFIG_NLS_CODEPAGE_932=m
CONFIG_NLS_CODEPAGE_949=m
CONFIG_NLS_CODEPAGE_874=m
CONFIG_NLS_ISO8859_8=m
CONFIG_NLS_CODEPAGE_1250=m
CONFIG_NLS_CODEPAGE_1251=m
CONFIG_NLS_ISO8859_1=m
CONFIG_NLS_ISO8859_2=m
CONFIG_NLS_ISO8859_3=m
CONFIG_NLS_ISO8859_4=m
CONFIG_NLS_ISO8859_5=m
CONFIG_NLS_ISO8859_6=m
CONFIG_NLS_ISO8859_7=m
CONFIG_NLS_ISO8859_9=m
CONFIG_NLS_ISO8859_13=m
CONFIG_NLS_ISO8859_14=m
CONFIG_NLS_ISO8859_15=m
CONFIG_NLS_KOI8_R=m
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_UTF8=m

#
# Console drivers
#
CONFIG_VGA_CONSOLE=y

#
# Frame-buffer support
#
CONFIG_FB=y
CONFIG_DUMMY_CONSOLE=y
# CONFIG_FB_CLGEN is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_TGA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_MATROX is not set
CONFIG_FB_ATY=y
CONFIG_FB_ATY_GX=y
CONFIG_FB_ATY_CT=y
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
CONFIG_FB_TRIDENT=m
CONFIG_FB_PM3=m
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FBCON_ADVANCED is not set
CONFIG_FBCON_CFB8=m
CONFIG_FBCON_CFB16=m
CONFIG_FBCON_CFB24=y
CONFIG_FBCON_CFB32=m
CONFIG_FBCON_ACCEL=y
# CONFIG_FBCON_FONTWIDTH8_ONLY is not set
CONFIG_FBCON_FONTS=y
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
CONFIG_FONT_SUN8x16=y
CONFIG_FONT_SUN12x22=y
# CONFIG_FONT_6x11 is not set
# CONFIG_FONT_PEARL_8x8 is not set
# CONFIG_FONT_ACORN_8x8 is not set
CONFIG_PCI_CONSOLE=y

#
# Sound
#
CONFIG_SOUND=m

#
# Open Sound System
#
# CONFIG_SOUND_PRIME is not set

#
# Advanced Linux Sound Architecture
#
CONFIG_SND=m
CONFIG_SND_SEQUENCER=m
CONFIG_SND_SEQ_DUMMY=m
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
CONFIG_SND_SEQUENCER_OSS=y
# CONFIG_SND_RTCTIMER is not set
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
# CONFIG_SND_DEBUG_MEMORY is not set
# CONFIG_SND_DEBUG_DETECT is not set

#
# Generic devices
#
CONFIG_SND_DUMMY=m
CONFIG_SND_VIRMIDI=m
# CONFIG_SND_MTPAV is not set
CONFIG_SND_SERIAL_U16550=m
CONFIG_SND_MPU401=m

#
# ISA devices
#
# CONFIG_SND_AD1816A is not set
# CONFIG_SND_AD1848 is not set
# CONFIG_SND_CS4231 is not set
# CONFIG_SND_CS4232 is not set
# CONFIG_SND_CS4236 is not set
# CONFIG_SND_ES968 is not set
# CONFIG_SND_ES1688 is not set
# CONFIG_SND_ES18XX is not set
# CONFIG_SND_GUSCLASSIC is not set
# CONFIG_SND_GUSEXTREME is not set
# CONFIG_SND_GUSMAX is not set
# CONFIG_SND_INTERWAVE is not set
# CONFIG_SND_INTERWAVE_STB is not set
# CONFIG_SND_OPTI92X_AD1848 is not set
# CONFIG_SND_OPTI92X_CS4231 is not set
# CONFIG_SND_OPTI93X is not set
# CONFIG_SND_SB8 is not set
# CONFIG_SND_SB16 is not set
# CONFIG_SND_SBAWE is not set
# CONFIG_SND_WAVEFRONT is not set
# CONFIG_SND_ALS100 is not set
# CONFIG_SND_AZT2320 is not set
# CONFIG_SND_CMI8330 is not set
# CONFIG_SND_DT0197H is not set
# CONFIG_SND_OPL3SA2 is not set
# CONFIG_SND_SGALAXY is not set

#
# PCI devices
#
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_YMFPCI is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_CMIPCI is not set
CONFIG_SND_ENS1370=m
CONFIG_SND_ENS1371=m
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_FM801 is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_INTEL8X0 is not set
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_VIA686 is not set
# CONFIG_SND_VIA8233 is not set

#
# USB support
#
CONFIG_USB=m
CONFIG_USB_DEBUG=y

#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_LONG_TIMEOUT is not set
# CONFIG_USB_BANDWIDTH is not set
# CONFIG_USB_DYNAMIC_MINORS is not set

#
# USB Host Controller Drivers
#
# CONFIG_USB_EHCI_HCD is not set
CONFIG_USB_OHCI_HCD=m
# CONFIG_USB_UHCI_HCD_ALT is not set

#
# USB Device Class drivers
#
CONFIG_USB_AUDIO=m
CONFIG_USB_BLUETOOTH_TTY=m
CONFIG_USB_MIDI=m
CONFIG_USB_ACM=m
CONFIG_USB_PRINTER=m
CONFIG_USB_STORAGE=m
CONFIG_USB_STORAGE_DEBUG=y
CONFIG_USB_STORAGE_DATAFAB=y
CONFIG_USB_STORAGE_FREECOM=y
CONFIG_USB_STORAGE_ISD200=y
CONFIG_USB_STORAGE_DPCM=y
CONFIG_USB_STORAGE_HP8200e=y
CONFIG_USB_STORAGE_SDDR09=y
CONFIG_USB_STORAGE_SDDR55=y
CONFIG_USB_STORAGE_JUMPSHOT=y

#
# USB Human Interface Devices (HID)
#
CONFIG_USB_HID=m
CONFIG_USB_HIDINPUT=y
CONFIG_HID_FF=y
CONFIG_HID_PID=y
CONFIG_LOGITECH_FF=y
CONFIG_USB_HIDDEV=y
CONFIG_USB_KBD=m
CONFIG_USB_MOUSE=m
CONFIG_USB_AIPTEK=m
CONFIG_USB_WACOM=m
CONFIG_USB_POWERMATE=m
CONFIG_USB_XPAD=m

#
# USB Imaging devices
#
CONFIG_USB_MDC800=m
CONFIG_USB_SCANNER=m
CONFIG_USB_MICROTEK=m
CONFIG_USB_HPUSBSCSI=m

#
# USB Multimedia devices
#
CONFIG_USB_DABUSB=m
CONFIG_USB_VICAM=m
CONFIG_USB_DSBR=m
CONFIG_USB_IBMCAM=m
CONFIG_USB_KONICAWC=m
CONFIG_USB_OV511=m
CONFIG_USB_PWC=m
CONFIG_USB_SE401=m
CONFIG_USB_STV680=m

#
# USB Network adaptors
#
CONFIG_USB_CATC=m
CONFIG_USB_CDCETHER=m
CONFIG_USB_KAWETH=m
CONFIG_USB_PEGASUS=m
CONFIG_USB_RTL8150=m
CONFIG_USB_USBNET=m

#
# USB port drivers
#
CONFIG_USB_USS720=m

#
# USB Serial Converter support
#
CONFIG_USB_SERIAL=m
CONFIG_USB_SERIAL_GENERIC=y
CONFIG_USB_SERIAL_BELKIN=m
CONFIG_USB_SERIAL_WHITEHEAT=m
CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
CONFIG_USB_SERIAL_EMPEG=m
CONFIG_USB_SERIAL_FTDI_SIO=m
CONFIG_USB_SERIAL_VISOR=m
CONFIG_USB_SERIAL_IPAQ=m
CONFIG_USB_SERIAL_IR=m
CONFIG_USB_SERIAL_EDGEPORT=m
CONFIG_USB_SERIAL_EDGEPORT_TI=m
CONFIG_USB_SERIAL_KEYSPAN_PDA=m
CONFIG_USB_SERIAL_KEYSPAN=m
CONFIG_USB_SERIAL_KEYSPAN_USA28=y
CONFIG_USB_SERIAL_KEYSPAN_USA28X=y
CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y
CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y
CONFIG_USB_SERIAL_KEYSPAN_USA19=y
CONFIG_USB_SERIAL_KEYSPAN_USA18X=y
CONFIG_USB_SERIAL_KEYSPAN_USA19W=y
CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y
CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y
CONFIG_USB_SERIAL_KEYSPAN_USA49W=y
CONFIG_USB_SERIAL_KLSI=m
CONFIG_USB_SERIAL_MCT_U232=m
CONFIG_USB_SERIAL_PL2303=m
CONFIG_USB_SERIAL_SAFE=m
CONFIG_USB_SERIAL_SAFE_PADDED=y
CONFIG_USB_SERIAL_CYBERJACK=m
CONFIG_USB_SERIAL_XIRCOM=m
CONFIG_USB_SERIAL_OMNINET=m

#
# USB Miscellaneous drivers
#
CONFIG_USB_EMI26=m
CONFIG_USB_TIGL=m
CONFIG_USB_AUERSWALD=m
CONFIG_USB_RIO500=m
CONFIG_USB_BRLVGER=m
CONFIG_USB_LCD=m
CONFIG_USB_SPEEDTOUCH=m

#
# Bluetooth support
#
# CONFIG_BLUEZ is not set

#
# Kernel hacking
#
# CONFIG_ALPHA_LEGACY_START_ADDRESS is not set
CONFIG_DEBUG_KERNEL=y
CONFIG_MATHEMU=y
# CONFIG_DEBUG_SLAB is not set
CONFIG_MAGIC_SYSRQ=y
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_RWLOCK is not set
# CONFIG_DEBUG_SEMAPHORE is not set

#
# Security options
#
CONFIG_SECURITY_CAPABILITIES=y

#
# Library routines
#
CONFIG_CRC32=m
CONFIG_ZLIB_INFLATE=m
CONFIG_ZLIB_DEFLATE=m








2002-09-30 07:53:46

by Jochen Friedrich

[permalink] [raw]
Subject: Re: 2.3.39 compile errors on Alpha

Hi,

> these are the errors i found in my log from a "make -k modules" on Alpha:

Additionally, i got a couple of unresolved symbols at the end of the
compile (stripped those away with versioned symbols which are caused by a
dependent module which failed to compile):

depmod: *** Unresolved symbols in
/lib/modules/2.5.39/kernel/drivers/isdn/divert/dss1_divert.o
depmod: cli
depmod: restore_flags
depmod: save_flags
depmod: *** Unresolved symbols in
/lib/modules/2.5.39/kernel/drivers/isdn/hardware/avm/b1pci.o
depmod: b1pciv4_remove
depmod: *** Unresolved symbols in
/lib/modules/2.5.39/kernel/drivers/isdn/hisax/hisax_fcclassic.o
depmod: inb
depmod: outb
depmod: *** Unresolved symbols in
/lib/modules/2.5.39/kernel/drivers/isdn/isdnloop/isdnloop.o
depmod: cli
depmod: restore_flags
depmod: save_flags
depmod: *** Unresolved symbols in
/lib/modules/2.5.39/kernel/drivers/usb/input/usbkbd.o
depmod: usb_kbd_free_buffers
depmod: *** Unresolved symbols in
/lib/modules/2.5.39/kernel/drivers/usb/storage/usb-storage.o
depmod: ide_fix_driveid
depmod: *** Unresolved symbols in
/lib/modules/2.5.39/kernel/net/ipv4/netfilter/ipt_owner.o
depmod: next_thread
depmod: find_task_by_pid
depmod: *** Unresolved symbols in
/lib/modules/2.5.39/kernel/net/ipv6/netfilter/ip6t_owner.o
depmod: next_thread
depmod: find_task_by_pid
depmod: *** Unresolved symbols in /lib/modules/2.5.39/kernel/net/x25/x25.o
depmod: sk_send_sigurg

Cheers,
--jochen

2002-09-30 11:03:14

by Adrian Bunk

[permalink] [raw]
Subject: Re: 2.3.39 compile errors on Alpha

On Mon, 30 Sep 2002, Jochen Friedrich wrote:

> Hi,

Hi Jochen,

> these are the errors i found in my log from a "make -k modules" on Alpha:
>
> drivers/atm/atmtcp.c:
>
> atmtcp.c:278: incompatible types in assignment

this is a known issue, the following patch (already in Linus' BK tree)
fixes it:

--- linux-2.5.35-VIRGIN/drivers/atm/atmtcp.c 2002-08-24 00:08:21.000000000 -0700
+++ linux-2.5.35/drivers/atm/atmtcp.c 2002-09-16 21:04:30.000000000 -0700
@@ -275,7 +275,7 @@
result = -ENOBUFS;
goto done;
}
- new_skb->stamp = xtime;
+ do_gettimeofday(&new_skb->stamp);
memcpy(skb_put(new_skb,skb->len),skb->data,skb->len);
out_vcc->push(out_vcc,new_skb);
atomic_inc(&vcc->stats->tx);

>...
> drivers/md/lvm.c:
>
> lvm.c:1: #error Broken until maintainers will sanitize kdev_t handling
>
> drivers/md/lvm-snap.c:
>
> lvm-snap.c:248: incompatible type for argument 1 of `block_size'
>...

LVM is currently completely broken, see the current discussions about how
to get LVM2 into 2.5 before Halloween.

> Cheers,
> --jochen
>...

cu
Adrian

--

You only think this is a free country. Like the US the UK spends a lot of
time explaining its a free country because its a police state.
Alan Cox

2002-09-30 12:23:41

by Alan Cox

[permalink] [raw]
Subject: Re: 2.3.39 compile errors on Alpha

On Mon, 2002-09-30 at 12:08, Adrian Bunk wrote:
> this is a known issue, the following patch (already in Linus' BK tree)
> fixes it:
>
> --- linux-2.5.35-VIRGIN/drivers/atm/atmtcp.c 2002-08-24 00:08:21.000000000 -0700
> +++ linux-2.5.35/drivers/atm/atmtcp.c 2002-09-16 21:04:30.000000000 -0700
> @@ -275,7 +275,7 @@
> result = -ENOBUFS;
> goto done;
> }
> - new_skb->stamp = xtime;
> + do_gettimeofday(&new_skb->stamp);

Is this actually safe - suppose the machine has no tsc counter (eg old
x86 or indeed new x86 numa, speedstep using, etc). In that case
do_gettimeofday doesn't appear to be either IRQ safe or fast enough to
use in this way ?

Alan

2002-09-30 12:27:30

by David Miller

[permalink] [raw]
Subject: Re: 2.3.39 compile errors on Alpha

From: Alan Cox <[email protected]>
Date: 30 Sep 2002 13:35:40 +0100

Is this actually safe - suppose the machine has no tsc counter (eg old
x86 or indeed new x86 numa, speedstep using, etc). In that case
do_gettimeofday doesn't appear to be either IRQ safe or fast enough to
use in this way ?

This is how netif_rx() has worked for a long time. ATM is just
copying the input packet logic.

So why are you complaining now? :-)

2002-09-30 13:04:13

by Alan Cox

[permalink] [raw]
Subject: Re: 2.3.39 compile errors on Alpha

On Mon, 2002-09-30 at 13:25, David S. Miller wrote:
> From: Alan Cox <[email protected]>
> Date: 30 Sep 2002 13:35:40 +0100
>
> Is this actually safe - suppose the machine has no tsc counter (eg old
> x86 or indeed new x86 numa, speedstep using, etc). In that case
> do_gettimeofday doesn't appear to be either IRQ safe or fast enough to
> use in this way ?
>
> This is how netif_rx() has worked for a long time. ATM is just
> copying the input packet logic.
>
> So why are you complaining now? :-)

Because I was looking over the gettimeoffset code and forgot that
gettimeofday itself takes the xtime_lock 8)

Alan


2002-09-30 13:13:55

by Adam Voigt

[permalink] [raw]
Subject: 2.5.39 XConfig Processor Detection

Apologies if this has already been noted or if I'm posting
this to the wrong place/annoying you very busy people needlessly,
but when I run XConfig, in the "Processor Type and Features" tab
it autodetects my processor as a Pentium-4 when in fact it is a
P3 700MHZ. The last time I installed a kernel (2.4.x) by hand, it did
autodetect the processor on that machine (Athlon), so I assume that
feature is still active. Anyways, here's the output from my cpuinfo:


processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 8
model name : Pentium III (Coppermine)
stepping : 3
cpu MHz : 701.606
cache size : 256 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 2
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov
pat pse36 mmx fxsr sse
bogomips : 1399.19


Thanks,

Adam Voigt
[email protected]

2002-09-30 13:22:07

by Dave Jones

[permalink] [raw]
Subject: Re: 2.5.39 XConfig Processor Detection

On Mon, Sep 30, 2002 at 09:20:21AM -0400, Adam Voigt wrote:
> Apologies if this has already been noted or if I'm posting
> this to the wrong place/annoying you very busy people needlessly,
> but when I run XConfig, in the "Processor Type and Features" tab
> it autodetects my processor as a Pentium-4 when in fact it is a
> P3 700MHZ. The last time I installed a kernel (2.4.x) by hand, it did
> autodetect the processor on that machine (Athlon), so I assume that
> feature is still active. Anyways, here's the output from my cpuinfo:

There's no 'autodetect' feature.
Only defconfig, which sets the default option.
These defaults match whatever Linus is currently using, so
it seems he upgraded his Athlon box to a P4 8-)

Dave

--
| Dave Jones. http://www.codemonkey.org.uk
| SuSE Labs

2002-09-30 13:41:43

by Adam Voigt

[permalink] [raw]
Subject: Re: 2.5.39 XConfig Processor Detection

Ahh, that would make sense then. Well I feel kind of dumb, I
just naturally assumed you had a built in feature that read
the /proc for current hardware or something (and since it worked
for me once (when the Athlon was the default)). Heh, well you
learn something new every day.

Adam Voigt
[email protected]

On Mon, 2002-09-30 at 09:30, Dave Jones wrote:
> On Mon, Sep 30, 2002 at 09:20:21AM -0400, Adam Voigt wrote:
> > Apologies if this has already been noted or if I'm posting
> > this to the wrong place/annoying you very busy people needlessly,
> > but when I run XConfig, in the "Processor Type and Features" tab
> > it autodetects my processor as a Pentium-4 when in fact it is a
> > P3 700MHZ. The last time I installed a kernel (2.4.x) by hand, it did
> > autodetect the processor on that machine (Athlon), so I assume that
> > feature is still active. Anyways, here's the output from my cpuinfo:
>
> There's no 'autodetect' feature.
> Only defconfig, which sets the default option.
> These defaults match whatever Linus is currently using, so
> it seems he upgraded his Athlon box to a P4 8-)
>
> Dave
>
> --
> | Dave Jones. http://www.codemonkey.org.uk
> | SuSE Labs


2002-09-30 17:54:14

by Jochen Friedrich

[permalink] [raw]
Subject: 2.3.39 LLC on Alpha broken?

Hi,

> I'll try to reboot the remaining mess and report how far it gets...

It looks like LLC is the culprit for me:

Unable to handle kernel paging request at virtual address 0000000000000000
swapper(1): Oops 0
pc = [<fffffc00009d094c>] ra = [<fffffc00009c8c8c>] ps = 0000 Not
tainted
Using defaults from ksymoops -t elf64-alpha -a alpha
v0 = 0000000000000000 t0 = fffffc0000b73190 t1 = 0000000000000001
t2 = 5a5a5a5a5a5a5a5a t3 = 0000000000000000 t4 = fffffc00001bef08
t5 = fffffc00001bef0d t6 = fffffc000000afe8 t7 = fffffc00002a0000
s0 = 0000000000000000 s1 = 00000000000000aa s2 = fffffc000095fa40
s3 = fffffc000106fcf8 s4 = fffffc0000802000 s5 = fffffc0000e1fa80
s6 = fffffc0000810000
a0 = 00000000000000aa a1 = fffffc000095fa40 a2 = 00000000000041ed
a3 = 0000000000000000 a4 = 0000000000000000 a5 = fffffc0000a7f790
t8 = 0000000000000004 t9 = fffffc0001049368 t10= 0000000000004000
t11= 0000000000008000 pv = fffffc00009d0920 at = 0000000000000000
gp = fffffc0000af72f8 sp = fffffc00002a3e60
Trace:fffffc00009c8c8c fffffc0000810148 fffffc0000810828 fffffc00008322f8
fffffc
00008100a4 fffffc0000810120 fffffc0000810810
Code: 47ff0409 a0280068 20210100 b0280068 a43d5c78 a4810040
<a4440000> a3e2
0000


>>RA; fffffc00009c8c8c <llc_sap_open+2c/c0>

>>PC; fffffc00009d094c <llc_sap_find+2c/100> <=====

Trace; fffffc00009c8c8c <llc_sap_open+2c/c0>
Trace; fffffc0000810148 <init+28/240>
Trace; fffffc0000810828 <kernel_thread+28/90>
Trace; fffffc00008322f8 <printk+218/280>
Trace; fffffc00008100a4 <rest_init+24/60>
Trace; fffffc0000810120 <init+0/240>
Trace; fffffc0000810810 <kernel_thread+10/90>

Code; fffffc00009d0934 <llc_sap_find+14/100>
0000000000000000 <_PC>:
Code; fffffc00009d0934 <llc_sap_find+14/100>
0: 09 04 ff 47 clr s0
Code; fffffc00009d0938 <llc_sap_find+18/100>
4: 68 00 28 a0 ldl t0,104(t7)
Code; fffffc00009d093c <llc_sap_find+1c/100>
8: 00 01 21 20 lda t0,256(t0)
Code; fffffc00009d0940 <llc_sap_find+20/100>
c: 68 00 28 b0 stl t0,104(t7)
Code; fffffc00009d0944 <llc_sap_find+24/100>
10: 78 5c 3d a4 ldq t0,23672(gp)
Code; fffffc00009d0948 <llc_sap_find+28/100>
14: 40 00 81 a4 ldq t3,64(t0)
Code; fffffc00009d094c <llc_sap_find+2c/100> <=====
18: 00 00 44 a4 ldq t1,0(t3) <=====
Code; fffffc00009d0950 <llc_sap_find+30/100>
1c: 00 00 e2 a3 ldl zero,0(t1)

Kernel panic: Aiee, killing interrupt handler!

I'll rebuild without LLC and test again...

--jochen

2002-09-30 18:02:11

by Arnaldo Carvalho de Melo

[permalink] [raw]
Subject: Re: 2.3.39 LLC on Alpha broken?

Em Mon, Sep 30, 2002 at 07:58:43PM +0200, Jochen Friedrich escreveu:
> Hi,
>
> > I'll try to reboot the remaining mess and report how far it gets...
>
> It looks like LLC is the culprit for me:

Yes, it is, this is fixed in Linus bk tree, snap_init has to be called after
llc_init, this is the patch:

diff -Nru a/net/Makefile b/net/Makefile
--- a/net/Makefile Wed Sep 18 22:54:43 2002
+++ b/net/Makefile Mon Sep 30 00:11:16 2002
@@ -9,6 +9,8 @@

obj-y := socket.o core/

+# LLC has to be linked before the files in net/802/
+obj-$(CONFIG_LLC) += llc/
obj-$(CONFIG_NET) += ethernet/ 802/ sched/ netlink/
obj-$(CONFIG_INET) += ipv4/
obj-$(CONFIG_UNIX) += unix/
@@ -31,7 +33,6 @@
obj-$(CONFIG_DECNET) += decnet/
obj-$(CONFIG_ECONET) += econet/
obj-$(CONFIG_VLAN_8021Q) += 8021q/
-obj-$(CONFIG_LLC) += llc/
obj-$(CONFIG_IP_SCTP) += sctp/

ifeq ($(CONFIG_NET),y)

2002-09-30 19:59:22

by Jochen Friedrich

[permalink] [raw]
Subject: Re: 2.3.39 LLC on Alpha broken?

Hi Arnaldo,

> Yes, it is, this is fixed in Linus bk tree, snap_init has to be called after
> llc_init, this is the patch:

Thanks. This fixed it.

However, i still have problems with my ISA busmaster DMA token ring card
in the box.

http://www.cs.helsinki.fi/linux/linux-kernel/2002-10/0179.html still
applies to 2.5.39. After changing ISA_DMA_MASK, my Alpha is now running
2.5.39 :-)

Remaining issues:

- ATY frame buffer not working (black screen with jumpy cursor)
- ALSA doesn't compile (this seems to be cause by missing include here and
there)

Cheers,
--jochen

2002-09-30 20:40:42

by David Miller

[permalink] [raw]
Subject: Re: 2.3.39 compile errors on Alpha

From: Alan Cox <[email protected]>
Date: 30 Sep 2002 14:15:50 +0100

Because I was looking over the gettimeoffset code and forgot that
gettimeofday itself takes the xtime_lock 8)

It used to be possible to implement this lockless using a $(sizeof
xtime)-bit load. But once you start adding complications such as
wall_jiffies, it isn't feasible anymore.

The next idea is to have a tick cookie that could later be converted
to/from a full timeval. This trick doesn't work on things like Alpha
where the guarenteed life of the tick is only 6 seconds or something
like that.

Most of the time the timestamp isn't even used.

If someone can propose other ideas I'm ready and listening :-)

2002-09-30 21:00:39

by David Miller

[permalink] [raw]
Subject: Re: 2.3.39 LLC on Alpha broken?

From: Jochen Friedrich <[email protected]>
Date: Mon, 30 Sep 2002 19:58:43 +0200 (CEST)

> I'll try to reboot the remaining mess and report how far it gets...

It looks like LLC is the culprit for me:

Arnaldo fixed this recently, it is a LLC bug.

2002-09-30 20:59:21

by Jochen Friedrich

[permalink] [raw]
Subject: Re: 2.3.39 LLC on Alpha broken?

Hi,

> Remaining issues:
>
> - ATY frame buffer not working (black screen with jumpy cursor)
> - ALSA doesn't compile (this seems to be cause by missing include here and
> there)

- After shutting down the Alpha with a "reboot" command, the last message
on the console was "Rebooting...". After that... nothing. Not even a
power-off - power-on helped, anymore. I just get 4 beeps from my Alpha
now, indicating an invalid firmware checksum... So 2.5.39 seems to be an
alpha2brick release :-(

--jochen

2002-10-01 14:41:55

by Ivan Kokshaysky

[permalink] [raw]
Subject: Re: 2.3.39 LLC on Alpha broken?

On Mon, Sep 30, 2002 at 11:04:17PM +0200, Jochen Friedrich wrote:
> - After shutting down the Alpha with a "reboot" command, the last message
> on the console was "Rebooting...". After that... nothing. Not even a
> power-off - power-on helped, anymore. I just get 4 beeps from my Alpha
> now, indicating an invalid firmware checksum... So 2.5.39 seems to be an
> alpha2brick release :-(

Strange. It works fine for me on sx164 and nautilus.
I could guess either a) some driver bug that accidentally hit the flash-ROM
area or b) just a terrible coincidence.

I hope that your fail-safe booter is intact...

Ivan.

2002-10-01 15:59:59

by Falk Hueffner

[permalink] [raw]
Subject: Re: 2.3.39 LLC on Alpha broken?

Ivan Kokshaysky <[email protected]> writes:

> On Mon, Sep 30, 2002 at 11:04:17PM +0200, Jochen Friedrich wrote:
> > - After shutting down the Alpha with a "reboot" command, the last message
> > on the console was "Rebooting...". After that... nothing. Not even a
> > power-off - power-on helped, anymore. I just get 4 beeps from my Alpha
> > now, indicating an invalid firmware checksum... So 2.5.39 seems to be an
> > alpha2brick release :-(
>
> Strange. It works fine for me on sx164 and nautilus. I could guess
> either a) some driver bug that accidentally hit the flash-ROM area
> or b) just a terrible coincidence.

Hmm, shutting down didn't work on my Nautilus with 2.5.39+Ivan's
Nautilus patches, either. It did not nuke the firmware, though...

--
Falk