Is anybody looking at getting $Subject working ?
At the moment i2c-sensor.c never gets compiled which is bad as
it contains i2c_detect needed by all the sensors.
And (assuming sensors works) where does the sensor info(fan, temp etc.)
get put?
Margit
On Wed, 2003-06-04 at 16:51, Margit Schubert-While wrote:
> Is anybody looking at getting $Subject working ?
> At the moment i2c-sensor.c never gets compiled which is bad as
> it contains i2c_detect needed by all the sensors.
Will have to check with Greg here.
> And (assuming sensors works) where does the sensor info(fan, temp etc.)
> get put?
>
In /sys/bus/i2c/....
Regards,
--
Martin Schlemmer
> Martin Schlemmer wrote :
> Will have to check with Greg here.
OK - Has anybody tested/got running I2C/Sensors > 2.5.6x ?
Who's maintaining the 2.5 sensors part ?
Need some info on naming conventions/display units for a port
of lm85 driver (chips lm85(b,c), adm1027, adt7463).
Doc is a wee bit out of date :-)
Margit
Look in -mm, Documentation/i2c/sysfs-interface.
Mainline seems to have lost this...
Greg KH is the Maintainer, though I wrote the via686a driver.
Jan
Margit Schubert-While wrote:
> > Martin Schlemmer wrote :
> > Will have to check with Greg here.
> OK - Has anybody tested/got running I2C/Sensors > 2.5.6x ?
>
> Who's maintaining the 2.5 sensors part ?
> Need some info on naming conventions/display units for a port
> of lm85 driver (chips lm85(b,c), adm1027, adt7463).
> Doc is a wee bit out of date :-)
>
> Margit
>
> -
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to [email protected]
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
>
On Wed, Jun 04, 2003 at 04:51:30PM +0200, Margit Schubert-While wrote:
> Is anybody looking at getting $Subject working ?
Works for me :)
> At the moment i2c-sensor.c never gets compiled which is bad as
> it contains i2c_detect needed by all the sensors.
What is your .config? Are you sure you have selected a i2c chip driver?
> And (assuming sensors works) where does the sensor info(fan, temp etc.)
> get put?
In sysfs. Look at Documentation/i2c/sysfs-interface for more
information on the different files and values.
thanks,
greg k-h
On Wed, Jun 04, 2003 at 08:54:01PM +0200, Jan Dittmer wrote:
> Look in -mm, Documentation/i2c/sysfs-interface.
> Mainline seems to have lost this...
Looks like it's there to me. Are you sure it's gone?
thanks,
greg k-h
Greg KH wrote:
> On Wed, Jun 04, 2003 at 08:54:01PM +0200, Jan Dittmer wrote:
>
>>Look in -mm, Documentation/i2c/sysfs-interface.
>>Mainline seems to have lost this...
>
>
> Looks like it's there to me. Are you sure it's gone?
Indeed it is. Must have been a bit fast... :)
Jan
> What is your .config? Are you sure you have selected a i2c chip driver?
Look at this line in the Makefile :
obj-$(CONFIG_I2C_SENSOR) += i2c-sensor.o
There is no sign of CONFIG_I2C_SENSOR anywhere.
Margit
Check at the bottom of this page:
http://linus.bkbits.net:8080/linux-2.5/anno/drivers/i2c/chips/[email protected]?nav=index.html|src/|src/drivers|src/drivers/i2c|src/drivers/i2c/chips
2.5.x should be setting it for you if you have in fact
selected an i2c chip.
Jordan
--- Margit Schubert-While <[email protected]>
wrote:
> > What is your .config? Are you sure you have
> selected a i2c chip driver?
>
> Look at this line in the Makefile :
> obj-$(CONFIG_I2C_SENSOR) += i2c-sensor.o
>
> There is no sign of CONFIG_I2C_SENSOR anywhere.
>
> Margit
>
> -
> To unsubscribe from this list: send the line
> "unsubscribe linux-kernel" in
> the body of a message to [email protected]
> More majordomo info at
> http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
> Check at the bottom of this page:
Indeed (kicks self).
So, to test a new external driver, I have to select an existing one.
Seems a bit restrictive.
I think it should be selectable in I2C (builtin/module) and cross-checked
in sensors.
Margit