Hi,
This patch adds a new ATSC frontend driver, needed by the cx88-based
pcHDTV 3000 card. Also includes a tiny chunk to activate the or51132
support in the cx88-dvb driver.
This patch depends on the cx88 dvb driver update.
Gerd
Signed-off-by: Gerd Knorr <[email protected]>
---
drivers/media/dvb/frontends/Kconfig | 4
drivers/media/dvb/frontends/Makefile | 2
drivers/media/dvb/frontends/or51132.c | 628 ++++++++++++++++++++++++++
drivers/media/dvb/frontends/or51132.h | 48 +
drivers/media/video/Kconfig | 1
drivers/media/video/cx88/cx88-dvb.c | 2
6 files changed, 683 insertions(+), 2 deletions(-)
Index: linux-2.6.11/drivers/media/dvb/frontends/or51132.h
===================================================================
--- /dev/null 1970-01-01 00:00:00.000000000 +0000
+++ linux-2.6.11/drivers/media/dvb/frontends/or51132.h 2005-03-07 16:31:12.000000000 +0100
@@ -0,0 +1,48 @@
+/*
+ * Support for OR51132 (pcHDTV HD-3000) - VSB/QAM
+ *
+ * Copyright (C) 2005 Kirk Lapray <[email protected]>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+*/
+
+#ifndef OR51132_H
+#define OR51132_H
+
+#include <linux/firmware.h>
+#include <linux/dvb/frontend.h>
+
+struct or51132_config
+{
+ /* The demodulator's i2c address */
+ u8 demod_address;
+ u8 pll_address;
+ struct dvb_pll_desc *pll_desc;
+
+ /* Need to set device param for start_dma */
+ int (*set_ts_params)(struct dvb_frontend* fe, int is_punctured);
+};
+
+extern struct dvb_frontend* or51132_attach(const struct or51132_config* config,
+ struct i2c_adapter* i2c);
+
+#endif // OR51132_H
+
+/*
+ * Local variables:
+ * c-basic-offset: 8
+ * End:
+ */
Index: linux-2.6.11/drivers/media/dvb/frontends/or51132.c
===================================================================
--- /dev/null 1970-01-01 00:00:00.000000000 +0000
+++ linux-2.6.11/drivers/media/dvb/frontends/or51132.c 2005-03-07 16:31:12.000000000 +0100
@@ -0,0 +1,628 @@
+/*
+ * Support for OR51132 (pcHDTV HD-3000) - VSB/QAM
+ *
+ * Copyright (C) 2005 Kirk Lapray <[email protected]>
+ *
+ * Based on code from Jack Kelliher ([email protected])
+ * Copyright (C) 2002 & pcHDTV, inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+*/
+
+/*
+ * This driver needs two external firmware files. Please copy
+ * "dvb-fe-or51132-vsb.fw" and "dvb-fe-or51132-qam.fw" to
+ * /usr/lib/hotplug/firmware/ or /lib/firmware/
+ * (depending on configuration of firmware hotplug).
+ */
+#define OR51132_VSB_FIRMWARE "dvb-fe-or51132-vsb.fw"
+#define OR51132_QAM_FIRMWARE "dvb-fe-or51132-qam.fw"
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <asm/byteorder.h>
+
+#include "dvb_frontend.h"
+#include "dvb-pll.h"
+#include "or51132.h"
+
+static int debug;
+#define dprintk(args...) \
+ do { \
+ if (debug) printk(KERN_DEBUG "or51132: " args); \
+ } while (0)
+
+
+struct or51132_state
+{
+ struct i2c_adapter* i2c;
+ struct dvb_frontend_ops ops;
+
+ /* Configuration settings */
+ const struct or51132_config* config;
+
+ struct dvb_frontend frontend;
+
+ /* Demodulator private data */
+ fe_modulation_t current_modulation;
+
+ /* Tuner private data */
+ u32 current_frequency;
+};
+
+static int i2c_writebytes (struct or51132_state* state, u8 reg, u8 *buf, int len)
+{
+ int err;
+ struct i2c_msg msg;
+ msg.addr = reg;
+ msg.flags = 0;
+ msg.len = len;
+ msg.buf = buf;
+
+ if ((err = i2c_transfer(state->i2c, &msg, 1)) != 1) {
+ printk(KERN_WARNING "or51132: i2c_writebytes error (addr %02x, err == %i)\n", reg, err);
+ return -EREMOTEIO;
+ }
+
+ return 0;
+}
+
+static u8 i2c_readbytes (struct or51132_state* state, u8 reg, u8* buf, int len)
+{
+ int err;
+ struct i2c_msg msg;
+ msg.addr = reg;
+ msg.flags = I2C_M_RD;
+ msg.len = len;
+ msg.buf = buf;
+
+ if ((err = i2c_transfer(state->i2c, &msg, 1)) != 1) {
+ printk(KERN_WARNING "or51132: i2c_readbytes error (addr %02x, err == %i)\n", reg, err);
+ return -EREMOTEIO;
+ }
+
+ return 0;
+}
+
+static int or51132_load_firmware (struct dvb_frontend* fe, const struct firmware *fw)
+{
+ struct or51132_state* state = (struct or51132_state*) fe->demodulator_priv;
+ static u8 run_buf[] = {0x7F,0x01};
+ static u8 get_ver_buf[] = {0x04,0x00,0x30,0x00,0x00};
+ u8 rec_buf[14];
+ u8 cmd_buf[14];
+ u32 firmwareAsize, firmwareBsize;
+ int i,ret;
+
+ dprintk("Firmware is %ld bytes\n",fw->size);
+
+ /* Get size of firmware A and B */
+ firmwareAsize = le32_to_cpu(*((u32*)fw->data));
+ dprintk("FirmwareA is %i bytes\n",firmwareAsize);
+ firmwareBsize = le32_to_cpu(*((u32*)(fw->data+4)));
+ dprintk("FirmwareB is %i bytes\n",firmwareBsize);
+
+ /* Upload firmware */
+ if ((ret = i2c_writebytes(state,state->config->demod_address,
+ &fw->data[8],firmwareAsize))) {
+ printk(KERN_WARNING "or51132: load_firmware error 1\n");
+ return ret;
+ }
+ msleep(1); /* 1ms */
+ if ((ret = i2c_writebytes(state,state->config->demod_address,
+ &fw->data[8+firmwareAsize],firmwareBsize))) {
+ printk(KERN_WARNING "or51132: load_firmware error 2\n");
+ return ret;
+ }
+ msleep(1); /* 1ms */
+
+ if ((ret = i2c_writebytes(state,state->config->demod_address,
+ run_buf,2))) {
+ printk(KERN_WARNING "or51132: load_firmware error 3\n");
+ return ret;
+ }
+
+ /* Wait at least 5 msec */
+ msleep(20); /* 10ms */
+
+ if ((ret = i2c_writebytes(state,state->config->demod_address,
+ run_buf,2))) {
+ printk(KERN_WARNING "or51132: load_firmware error 4\n");
+ return ret;
+ }
+
+ /* 50ms for operation to begin */
+ msleep(50);
+
+ /* Read back ucode version to besure we loaded correctly and are really up and running */
+ /* Get uCode version */
+ cmd_buf[0] = 0x10;
+ cmd_buf[1] = 0x10;
+ cmd_buf[2] = 0x00;
+ cmd_buf[3] = 0x00;
+ msleep(20); /* 20ms */
+ if ((ret = i2c_writebytes(state,state->config->demod_address,
+ cmd_buf,3))) {
+ printk(KERN_WARNING "or51132: load_firmware error a\n");
+ return ret;
+ }
+
+ cmd_buf[0] = 0x04;
+ cmd_buf[1] = 0x17;
+ cmd_buf[2] = 0x00;
+ cmd_buf[3] = 0x00;
+ msleep(20); /* 20ms */
+ if ((ret = i2c_writebytes(state,state->config->demod_address,
+ cmd_buf,2))) {
+ printk(KERN_WARNING "or51132: load_firmware error b\n");
+ return ret;
+ }
+
+ cmd_buf[0] = 0x00;
+ cmd_buf[1] = 0x00;
+ cmd_buf[2] = 0x00;
+ cmd_buf[3] = 0x00;
+ msleep(20); /* 20ms */
+ if ((ret = i2c_writebytes(state,state->config->demod_address,
+ cmd_buf,2))) {
+ printk(KERN_WARNING "or51132: load_firmware error c\n");
+ return ret;
+ }
+
+ for(i=0;i<4;i++) {
+ msleep(20); /* 20ms */
+ get_ver_buf[4] = i+1;
+ if ((ret = i2c_readbytes(state,state->config->demod_address,
+ &rec_buf[i*2],2))) {
+ printk(KERN_WARNING
+ "or51132: load_firmware error d - %d\n",i);
+ return ret;
+ }
+ }
+
+ printk(KERN_WARNING
+ "or51132: Version: %02X%02X%02X%02X-%02X%02X%02X%02X (%02X%01X-%01X-%02X%01X-%01X)\n",
+ rec_buf[1],rec_buf[0],rec_buf[3],rec_buf[2],
+ rec_buf[5],rec_buf[4],rec_buf[7],rec_buf[6],
+ rec_buf[3],rec_buf[2]>>4,rec_buf[2]&0x0f,
+ rec_buf[5],rec_buf[4]>>4,rec_buf[4]&0x0f);
+
+ cmd_buf[0] = 0x10;
+ cmd_buf[1] = 0x00;
+ cmd_buf[2] = 0x00;
+ cmd_buf[3] = 0x00;
+ msleep(20); /* 20ms */
+ if ((ret = i2c_writebytes(state,state->config->demod_address,
+ cmd_buf,3))) {
+ printk(KERN_WARNING "or51132: load_firmware error e\n");
+ return ret;
+ }
+ return 0;
+};
+
+static int or51132_init(struct dvb_frontend* fe)
+{
+ return 0;
+}
+
+static int or51132_read_ber(struct dvb_frontend* fe, u32* ber)
+{
+ *ber = 0;
+ return 0;
+}
+
+static int or51132_read_ucblocks(struct dvb_frontend* fe, u32* ucblocks)
+{
+ *ucblocks = 0;
+ return 0;
+}
+
+static int or51132_sleep(struct dvb_frontend* fe)
+{
+ return 0;
+}
+
+static int or51132_setmode(struct dvb_frontend* fe)
+{
+ struct or51132_state* state = (struct or51132_state*) fe->demodulator_priv;
+ unsigned char cmd_buf[4];
+
+ dprintk("setmode %d\n",(int)state->current_modulation);
+ /* set operation mode in Receiver 1 register; */
+ cmd_buf[0] = 0x04;
+ cmd_buf[1] = 0x01;
+ switch (state->current_modulation) {
+ case QAM_256:
+ case QAM_64:
+ case QAM_AUTO:
+ /* Auto-deinterleave; MPEG ser, MPEG2tr, phase noise-high*/
+ cmd_buf[2] = 0x5F;
+ break;
+ case VSB_8:
+ /* Auto CH, Auto NTSC rej, MPEGser, MPEG2tr, phase noise-high*/
+ cmd_buf[2] = 0x50;
+ break;
+ default:
+ printk("setmode:Modulation set to unsupported value\n");
+ };
+ cmd_buf[3] = 0x00;
+ if (i2c_writebytes(state,state->config->demod_address,
+ cmd_buf,3)) {
+ printk(KERN_WARNING "or51132: set_mode error 1\n");
+ return -1;
+ }
+ dprintk("or51132: set #1 to %02x\n", cmd_buf[2]);
+
+ /* Set operation mode in Receiver 6 register */
+ cmd_buf[0] = 0x1C;
+ switch (state->current_modulation) {
+ case QAM_AUTO:
+ /* REC MODE Normal Carrier Lock */
+ cmd_buf[1] = 0x00;
+ /* Channel MODE Auto QAM64/256 */
+ cmd_buf[2] = 0x4f;
+ break;
+ case QAM_256:
+ /* REC MODE Normal Carrier Lock */
+ cmd_buf[1] = 0x00;
+ /* Channel MODE QAM256 */
+ cmd_buf[2] = 0x45;
+ break;
+ case QAM_64:
+ /* REC MODE Normal Carrier Lock */
+ cmd_buf[1] = 0x00;
+ /* Channel MODE QAM64 */
+ cmd_buf[2] = 0x43;
+ break;
+ case VSB_8:
+ /* REC MODE inv IF spectrum, Normal */
+ cmd_buf[1] = 0x03;
+ /* Channel MODE ATSC/VSB8 */
+ cmd_buf[2] = 0x06;
+ break;
+ default:
+ printk("setmode: Modulation set to unsupported value\n");
+ };
+ cmd_buf[3] = 0x00;
+ msleep(20); /* 20ms */
+ if (i2c_writebytes(state,state->config->demod_address,
+ cmd_buf,3)) {
+ printk(KERN_WARNING "or51132: set_mode error 2\n");
+ return -1;
+ }
+ dprintk("or51132: set #6 to 0x%02x%02x\n", cmd_buf[1], cmd_buf[2]);
+
+ return 0;
+}
+
+static int or51132_set_parameters(struct dvb_frontend* fe,
+ struct dvb_frontend_parameters *param)
+{
+ int ret;
+ u8 buf[4];
+ struct or51132_state* state = (struct or51132_state*) fe->demodulator_priv;
+ const struct firmware *fw;
+
+ /* Change only if we are actually changing the modulation */
+ if (state->current_modulation != param->u.vsb.modulation) {
+ switch(param->u.vsb.modulation) {
+ case VSB_8:
+ dprintk("set_parameters VSB MODE\n");
+ printk("or51132: Waiting for firmware upload(%s)...\n",
+ OR51132_VSB_FIRMWARE);
+ ret = request_firmware(&fw, OR51132_VSB_FIRMWARE,
+ &state->i2c->dev);
+ if (ret){
+ printk(KERN_WARNING "or51132: No firmware up"
+ "loaded(timeout or file not found?)\n");
+ return ret;
+ }
+ /* Set non-punctured clock for VSB */
+ state->config->set_ts_params(fe, 0);
+ break;
+ case QAM_AUTO:
+ case QAM_64:
+ case QAM_256:
+ dprintk("set_parameters QAM MODE\n");
+ printk("or51132: Waiting for firmware upload(%s)...\n",
+ OR51132_QAM_FIRMWARE);
+ ret = request_firmware(&fw, OR51132_QAM_FIRMWARE,
+ &state->i2c->dev);
+ if (ret){
+ printk(KERN_WARNING "or51132: No firmware up"
+ "loaded(timeout or file not found?)\n");
+ return ret;
+ }
+ /* Set punctured clock for QAM */
+ state->config->set_ts_params(fe, 1);
+ break;
+ default:
+ printk("or51132:Modulation type(%d) UNSUPPORTED\n",
+ param->u.vsb.modulation);
+ return -1;
+ };
+ ret = or51132_load_firmware(fe, fw);
+ release_firmware(fw);
+ if (ret) {
+ printk(KERN_WARNING "or51132: Writing firmware to "
+ "device failed!\n");
+ return ret;
+ }
+ printk("or51132: Firmware upload complete.\n");
+
+ state->current_modulation = param->u.vsb.modulation;
+ or51132_setmode(fe);
+ }
+
+ /* Change only if we are actually changing the channel */
+ if (state->current_frequency != param->frequency) {
+ dvb_pll_configure(state->config->pll_desc, buf,
+ param->frequency, 0);
+ dprintk("set_parameters tuner bytes: 0x%02x 0x%02x "
+ "0x%02x 0x%02x\n",buf[0],buf[1],buf[2],buf[3]);
+ if (i2c_writebytes(state, state->config->pll_address ,buf, 4))
+ printk(KERN_WARNING "or51132: set_parameters error "
+ "writing to tuner\n");
+
+ /* Set to current mode */
+ or51132_setmode(fe);
+
+ /* Update current frequency */
+ state->current_frequency = param->frequency;
+ }
+ return 0;
+}
+
+static int or51132_read_status(struct dvb_frontend* fe, fe_status_t* status)
+{
+ struct or51132_state* state = (struct or51132_state*) fe->demodulator_priv;
+ unsigned char rec_buf[2];
+ unsigned char snd_buf[2];
+ *status = 0;
+
+ /* Receiver Status */
+ snd_buf[0]=0x04;
+ snd_buf[1]=0x00;
+ msleep(30); /* 30ms */
+ if (i2c_writebytes(state,state->config->demod_address,snd_buf,2)) {
+ printk(KERN_WARNING "or51132: read_status write error\n");
+ return -1;
+ }
+ msleep(30); /* 30ms */
+ if (i2c_readbytes(state,state->config->demod_address,rec_buf,2)) {
+ printk(KERN_WARNING "or51132: read_status read error\n");
+ return -1;
+ }
+ dprintk("read_status %x %x\n",rec_buf[0],rec_buf[1]);
+
+ if (rec_buf[1] & 0x01) { /* Receiver Lock */
+ *status |= FE_HAS_SIGNAL;
+ *status |= FE_HAS_CARRIER;
+ *status |= FE_HAS_VITERBI;
+ *status |= FE_HAS_SYNC;
+ *status |= FE_HAS_LOCK;
+ }
+ return 0;
+}
+
+/* log10-1 table at .5 increments from 1 to 100.5 */
+unsigned int i100x20log10[] = {
+ 0, 352, 602, 795, 954, 1088, 1204, 1306, 1397, 1480,
+ 1556, 1625, 1690, 1750, 1806, 1858, 1908, 1955, 2000, 2042,
+ 2082, 2121, 2158, 2193, 2227, 2260, 2292, 2322, 2352, 2380,
+ 2408, 2434, 2460, 2486, 2510, 2534, 2557, 2580, 2602, 2623,
+ 2644, 2664, 2684, 2704, 2723, 2742, 2760, 2778, 2795, 2813,
+ 2829, 2846, 2862, 2878, 2894, 2909, 2924, 2939, 2954, 2968,
+ 2982, 2996, 3010, 3023, 3037, 3050, 3062, 3075, 3088, 3100,
+ 3112, 3124, 3136, 3148, 3159, 3170, 3182, 3193, 3204, 3214,
+ 3225, 3236, 3246, 3256, 3266, 3276, 3286, 3296, 3306, 3316,
+ 3325, 3334, 3344, 3353, 3362, 3371, 3380, 3389, 3397, 3406,
+ 3415, 3423, 3432, 3440, 3448, 3456, 3464, 3472, 3480, 3488,
+ 3496, 3504, 3511, 3519, 3526, 3534, 3541, 3549, 3556, 3563,
+ 3570, 3577, 3584, 3591, 3598, 3605, 3612, 3619, 3625, 3632,
+ 3639, 3645, 3652, 3658, 3665, 3671, 3677, 3683, 3690, 3696,
+ 3702, 3708, 3714, 3720, 3726, 3732, 3738, 3744, 3750, 3755,
+ 3761, 3767, 3772, 3778, 3784, 3789, 3795, 3800, 3806, 3811,
+ 3816, 3822, 3827, 3832, 3838, 3843, 3848, 3853, 3858, 3863,
+ 3868, 3874, 3879, 3884, 3888, 3893, 3898, 3903, 3908, 3913,
+ 3918, 3922, 3927, 3932, 3936, 3941, 3946, 3950, 3955, 3960,
+ 3964, 3969, 3973, 3978, 3982, 3986, 3991, 3995, 4000, 4004,
+};
+
+unsigned int denom[] = {1,1,100,1000,10000,100000,1000000,10000000,100000000};
+
+unsigned int i20Log10(unsigned short val)
+{
+ unsigned int rntval = 100;
+ unsigned int tmp = val;
+ unsigned int exp = 1;
+
+ while(tmp > 100) {tmp /= 100; exp++;}
+
+ val = (2 * val)/denom[exp];
+ if (exp > 1) rntval = 2000*exp;
+
+ rntval += i100x20log10[val];
+ return rntval;
+}
+
+static int or51132_read_signal_strength(struct dvb_frontend* fe, u16* strength)
+{
+ struct or51132_state* state = (struct or51132_state*) fe->demodulator_priv;
+ unsigned char rec_buf[2];
+ unsigned char snd_buf[2];
+ u8 rcvr_stat;
+ u16 snr_equ;
+ int usK;
+
+ snd_buf[0]=0x04;
+ snd_buf[1]=0x02; /* SNR after Equalizer */
+ msleep(30); /* 30ms */
+ if (i2c_writebytes(state,state->config->demod_address,snd_buf,2)) {
+ printk(KERN_WARNING "or51132: read_status write error\n");
+ return -1;
+ }
+ msleep(30); /* 30ms */
+ if (i2c_readbytes(state,state->config->demod_address,rec_buf,2)) {
+ printk(KERN_WARNING "or51132: read_status read error\n");
+ return -1;
+ }
+ snr_equ = rec_buf[0] | (rec_buf[1] << 8);
+ dprintk("read_signal_strength snr_equ %x %x (%i)\n",rec_buf[0],rec_buf[1],snr_equ);
+
+ /* Receiver Status */
+ snd_buf[0]=0x04;
+ snd_buf[1]=0x00;
+ msleep(30); /* 30ms */
+ if (i2c_writebytes(state,state->config->demod_address,snd_buf,2)) {
+ printk(KERN_WARNING "or51132: read_signal_strength read_status write error\n");
+ return -1;
+ }
+ msleep(30); /* 30ms */
+ if (i2c_readbytes(state,state->config->demod_address,rec_buf,2)) {
+ printk(KERN_WARNING "or51132: read_signal_strength read_status read error\n");
+ return -1;
+ }
+ dprintk("read_signal_strength read_status %x %x\n",rec_buf[0],rec_buf[1]);
+ rcvr_stat = rec_buf[1];
+ usK = (rcvr_stat & 0x10) ? 3 : 0;
+
+ /* The value reported back from the frontend will be FFFF=100% 0000=0% */
+ *strength = (((8952 - i20Log10(snr_equ) - usK*100)/3+5)*65535)/1000;
+ dprintk("read_signal_strength %i\n",*strength);
+
+ return 0;
+}
+
+static int or51132_read_snr(struct dvb_frontend* fe, u16* snr)
+{
+ struct or51132_state* state = (struct or51132_state*) fe->demodulator_priv;
+ unsigned char rec_buf[2];
+ unsigned char snd_buf[2];
+ u16 snr_equ;
+
+ snd_buf[0]=0x04;
+ snd_buf[1]=0x02; /* SNR after Equalizer */
+ msleep(30); /* 30ms */
+ if (i2c_writebytes(state,state->config->demod_address,snd_buf,2)) {
+ printk(KERN_WARNING "or51132: read_snr write error\n");
+ return -1;
+ }
+ msleep(30); /* 30ms */
+ if (i2c_readbytes(state,state->config->demod_address,rec_buf,2)) {
+ printk(KERN_WARNING "or51132: read_snr dvr read error\n");
+ return -1;
+ }
+ snr_equ = rec_buf[0] | (rec_buf[1] << 8);
+ dprintk("read_snr snr_equ %x %x (%i)\n",rec_buf[0],rec_buf[1],snr_equ);
+
+ *snr = 0xFFFF - snr_equ;
+ dprintk("read_snr %i\n",*snr);
+
+ return 0;
+}
+
+static int or51132_get_tune_settings(struct dvb_frontend* fe, struct dvb_frontend_tune_settings* fe_tune_settings)
+{
+ fe_tune_settings->min_delay_ms = 500;
+ fe_tune_settings->step_size = 0;
+ fe_tune_settings->max_drift = 0;
+
+ return 0;
+}
+
+static void or51132_release(struct dvb_frontend* fe)
+{
+ struct or51132_state* state = (struct or51132_state*) fe->demodulator_priv;
+ kfree(state);
+}
+
+static struct dvb_frontend_ops or51132_ops;
+
+struct dvb_frontend* or51132_attach(const struct or51132_config* config,
+ struct i2c_adapter* i2c)
+{
+ struct or51132_state* state = NULL;
+
+ /* Allocate memory for the internal state */
+ state = kmalloc(sizeof(struct or51132_state), GFP_KERNEL);
+ if (state == NULL)
+ goto error;
+
+ /* Setup the state */
+ state->config = config;
+ state->i2c = i2c;
+ memcpy(&state->ops, &or51132_ops, sizeof(struct dvb_frontend_ops));
+ state->current_frequency = -1;
+ state->current_modulation = -1;
+
+ /* Create dvb_frontend */
+ state->frontend.ops = &state->ops;
+ state->frontend.demodulator_priv = state;
+ return &state->frontend;
+
+error:
+ if (state)
+ kfree(state);
+ return NULL;
+}
+
+static struct dvb_frontend_ops or51132_ops = {
+
+ .info = {
+ .name = "Oren OR51132 VSB/QAM Frontend",
+ .type = FE_ATSC,
+ .frequency_min = 44000000,
+ .frequency_max = 958000000,
+ .frequency_stepsize = 166666,
+ .caps = FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 |
+ FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO |
+ FE_CAN_QAM_64 | FE_CAN_QAM_256 | FE_CAN_QAM_AUTO |
+ FE_CAN_8VSB
+ },
+
+ .release = or51132_release,
+
+ .init = or51132_init,
+ .sleep = or51132_sleep,
+
+ .set_frontend = or51132_set_parameters,
+ .get_tune_settings = or51132_get_tune_settings,
+
+ .read_status = or51132_read_status,
+ .read_ber = or51132_read_ber,
+ .read_signal_strength = or51132_read_signal_strength,
+ .read_snr = or51132_read_snr,
+ .read_ucblocks = or51132_read_ucblocks,
+};
+
+module_param(debug, int, 0644);
+MODULE_PARM_DESC(debug, "Turn on/off frontend debugging (default:off).");
+
+MODULE_DESCRIPTION("OR51132 ATSC [pcHDTV HD-3000] (8VSB & ITU J83 AnnexB FEC QAM64/256) Demodulator Driver");
+MODULE_AUTHOR("Kirk Lapray");
+MODULE_LICENSE("GPL");
+
+EXPORT_SYMBOL(or51132_attach);
+
+/*
+ * Local variables:
+ * c-basic-offset: 8
+ * End:
+ */
Index: linux-2.6.11/drivers/media/dvb/frontends/Makefile
===================================================================
--- linux-2.6.11.orig/drivers/media/dvb/frontends/Makefile 2005-03-07 16:25:54.000000000 +0100
+++ linux-2.6.11/drivers/media/dvb/frontends/Makefile 2005-03-07 16:31:05.000000000 +0100
@@ -26,4 +26,4 @@ obj-$(CONFIG_DVB_TDA80XX) += tda80xx.o
obj-$(CONFIG_DVB_TDA10021) += tda10021.o
obj-$(CONFIG_DVB_STV0297) += stv0297.o
obj-$(CONFIG_DVB_NXT2002) += nxt2002.o
-
+obj-$(CONFIG_DVB_OR51132) += or51132.o
Index: linux-2.6.11/drivers/media/dvb/frontends/Kconfig
===================================================================
--- linux-2.6.11.orig/drivers/media/dvb/frontends/Kconfig 2005-03-07 10:12:55.000000000 +0100
+++ linux-2.6.11/drivers/media/dvb/frontends/Kconfig 2005-03-07 16:31:05.000000000 +0100
@@ -157,4 +157,8 @@ config DVB_NXT2002
help
An ATSC 8VSB tuner module. Say Y when you want to support this frontend.
+config DVB_OR51132
+ tristate "OR51132 based (pcHDTV)"
+ depends on DVB_CORE
+
endmenu
Index: linux-2.6.11/drivers/media/video/Kconfig
===================================================================
--- linux-2.6.11.orig/drivers/media/video/Kconfig 2005-03-07 16:31:00.000000000 +0100
+++ linux-2.6.11/drivers/media/video/Kconfig 2005-03-07 16:31:05.000000000 +0100
@@ -328,6 +328,7 @@ config VIDEO_CX88_DVB
select VIDEO_BUF_DVB
select DVB_MT352
select DVB_CX22702
+ select DVB_OR51132
---help---
This adds support for DVB/ATSC cards based on the
Connexant 2388x chip.
Index: linux-2.6.11/drivers/media/video/cx88/cx88-dvb.c
===================================================================
--- linux-2.6.11.orig/drivers/media/video/cx88/cx88-dvb.c 2005-03-07 16:31:00.000000000 +0100
+++ linux-2.6.11/drivers/media/video/cx88/cx88-dvb.c 2005-03-07 16:31:05.000000000 +0100
@@ -32,7 +32,7 @@
/* those two frontends need merging via linuxtv cvs ... */
#define HAVE_CX22702 1
-#define HAVE_OR51132 0
+#define HAVE_OR51132 1
#include "cx88.h"
#include "dvb-pll.h"
--
#define printk(args...) fprintf(stderr, ## args)