The driver was working with fixed phy without any noticeable issues. This bug
was uncovered by introducing dsa ar9331-switch driver.
Signed-off-by: Oleksij Rempel <[email protected]>
---
drivers/net/ethernet/atheros/ag71xx.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/drivers/net/ethernet/atheros/ag71xx.c b/drivers/net/ethernet/atheros/ag71xx.c
index 6703960c7cf5..d1101eea15c2 100644
--- a/drivers/net/ethernet/atheros/ag71xx.c
+++ b/drivers/net/ethernet/atheros/ag71xx.c
@@ -526,7 +526,7 @@ static int ag71xx_mdio_probe(struct ag71xx *ag)
struct device *dev = &ag->pdev->dev;
struct net_device *ndev = ag->ndev;
static struct mii_bus *mii_bus;
- struct device_node *np;
+ struct device_node *np, *mnp;
int err;
np = dev->of_node;
@@ -571,7 +571,9 @@ static int ag71xx_mdio_probe(struct ag71xx *ag)
msleep(200);
}
- err = of_mdiobus_register(mii_bus, np);
+ mnp = of_get_child_by_name(np, "mdio");
+ err = of_mdiobus_register(mii_bus, mnp);
+ of_node_put(mnp);
if (err)
goto mdio_err_put_clk;
--
2.23.0
On Mon, Sep 30, 2019 at 11:33:10AM +0200, Oleksij Rempel wrote:
> The driver was working with fixed phy without any noticeable issues. This bug
> was uncovered by introducing dsa ar9331-switch driver.
>
> Signed-off-by: Oleksij Rempel <[email protected]>
> ---
> drivers/net/ethernet/atheros/ag71xx.c | 6 ++++--
> 1 file changed, 4 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/net/ethernet/atheros/ag71xx.c b/drivers/net/ethernet/atheros/ag71xx.c
> index 6703960c7cf5..d1101eea15c2 100644
> --- a/drivers/net/ethernet/atheros/ag71xx.c
> +++ b/drivers/net/ethernet/atheros/ag71xx.c
> @@ -526,7 +526,7 @@ static int ag71xx_mdio_probe(struct ag71xx *ag)
> struct device *dev = &ag->pdev->dev;
> struct net_device *ndev = ag->ndev;
> static struct mii_bus *mii_bus;
> - struct device_node *np;
> + struct device_node *np, *mnp;
> int err;
>
> np = dev->of_node;
> @@ -571,7 +571,9 @@ static int ag71xx_mdio_probe(struct ag71xx *ag)
> msleep(200);
> }
>
> - err = of_mdiobus_register(mii_bus, np);
> + mnp = of_get_child_by_name(np, "mdio");
> + err = of_mdiobus_register(mii_bus, mnp);
> + of_node_put(mnp);
> if (err)
> goto mdio_err_put_clk;
Hi Oleksij
You need to keep backwards compatibility here. If you find an mdio
node, use it, but if not, you need to still register np.
This is also extending the driver binding, so you need to update the
binding documentation.
Andrew
On Mon, Sep 30, 2019 at 03:42:09PM +0200, Andrew Lunn wrote:
> On Mon, Sep 30, 2019 at 11:33:10AM +0200, Oleksij Rempel wrote:
> > The driver was working with fixed phy without any noticeable issues. This bug
> > was uncovered by introducing dsa ar9331-switch driver.
> >
> > Signed-off-by: Oleksij Rempel <[email protected]>
> > ---
> > drivers/net/ethernet/atheros/ag71xx.c | 6 ++++--
> > 1 file changed, 4 insertions(+), 2 deletions(-)
> >
> > diff --git a/drivers/net/ethernet/atheros/ag71xx.c b/drivers/net/ethernet/atheros/ag71xx.c
> > index 6703960c7cf5..d1101eea15c2 100644
> > --- a/drivers/net/ethernet/atheros/ag71xx.c
> > +++ b/drivers/net/ethernet/atheros/ag71xx.c
> > @@ -526,7 +526,7 @@ static int ag71xx_mdio_probe(struct ag71xx *ag)
> > struct device *dev = &ag->pdev->dev;
> > struct net_device *ndev = ag->ndev;
> > static struct mii_bus *mii_bus;
> > - struct device_node *np;
> > + struct device_node *np, *mnp;
> > int err;
> >
> > np = dev->of_node;
> > @@ -571,7 +571,9 @@ static int ag71xx_mdio_probe(struct ag71xx *ag)
> > msleep(200);
> > }
> >
> > - err = of_mdiobus_register(mii_bus, np);
> > + mnp = of_get_child_by_name(np, "mdio");
> > + err = of_mdiobus_register(mii_bus, mnp);
> > + of_node_put(mnp);
> > if (err)
> > goto mdio_err_put_clk;
>
> Hi Oleksij
>
> You need to keep backwards compatibility here. If you find an mdio
> node, use it, but if not, you need to still register np.
>
> This is also extending the driver binding, so you need to update the
> binding documentation.
Hi Andrew,
Normally i would agree. But in this case:
- this driver is freshly added to the kernel and is different to OpenWrt
implementation any way. No users from this side.
- Devicetree binding says:
Documentation/devicetree/bindings/net/qca,ar71xx.txt
|Optional properties:
|- phy-handle : phandle to the PHY device connected to this device.
|- fixed-link : Assume a fixed link. See fixed-link.txt in the same directory.
| Use instead of phy-handle.
|
|Optional subnodes:
|- mdio : specifies the mdio bus, used as a container for phy nodes
| according to phy.txt in the same directory
So, it is driver bug ...ooOO (my personal bug :D)
I would say: if some one already started to use this driver, didn't used
documentation and didn't reported this bug, can't really blame any one
here :)
Regards,
Oleksij
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
On Mon, Sep 30, 2019 at 04:29:07PM +0200, Oleksij Rempel wrote:
> On Mon, Sep 30, 2019 at 03:42:09PM +0200, Andrew Lunn wrote:
> > On Mon, Sep 30, 2019 at 11:33:10AM +0200, Oleksij Rempel wrote:
> > > The driver was working with fixed phy without any noticeable issues. This bug
> > > was uncovered by introducing dsa ar9331-switch driver.
> > >
> > > Signed-off-by: Oleksij Rempel <[email protected]>
> > > ---
> > > drivers/net/ethernet/atheros/ag71xx.c | 6 ++++--
> > > 1 file changed, 4 insertions(+), 2 deletions(-)
> > >
> > > diff --git a/drivers/net/ethernet/atheros/ag71xx.c b/drivers/net/ethernet/atheros/ag71xx.c
> > > index 6703960c7cf5..d1101eea15c2 100644
> > > --- a/drivers/net/ethernet/atheros/ag71xx.c
> > > +++ b/drivers/net/ethernet/atheros/ag71xx.c
> > > @@ -526,7 +526,7 @@ static int ag71xx_mdio_probe(struct ag71xx *ag)
> > > struct device *dev = &ag->pdev->dev;
> > > struct net_device *ndev = ag->ndev;
> > > static struct mii_bus *mii_bus;
> > > - struct device_node *np;
> > > + struct device_node *np, *mnp;
> > > int err;
> > >
> > > np = dev->of_node;
> > > @@ -571,7 +571,9 @@ static int ag71xx_mdio_probe(struct ag71xx *ag)
> > > msleep(200);
> > > }
> > >
> > > - err = of_mdiobus_register(mii_bus, np);
> > > + mnp = of_get_child_by_name(np, "mdio");
> > > + err = of_mdiobus_register(mii_bus, mnp);
> > > + of_node_put(mnp);
> > > if (err)
> > > goto mdio_err_put_clk;
> >
> > Hi Oleksij
> >
> > You need to keep backwards compatibility here. If you find an mdio
> > node, use it, but if not, you need to still register np.
> >
> > This is also extending the driver binding, so you need to update the
> > binding documentation.
>
> Hi Andrew,
>
> Normally i would agree. But in this case:
> - this driver is freshly added to the kernel and is different to OpenWrt
> implementation any way. No users from this side.
> - Devicetree binding says:
> Documentation/devicetree/bindings/net/qca,ar71xx.txt
> |Optional properties:
> |- phy-handle : phandle to the PHY device connected to this device.
> |- fixed-link : Assume a fixed link. See fixed-link.txt in the same directory.
> | Use instead of phy-handle.
> |
> |Optional subnodes:
> |- mdio : specifies the mdio bus, used as a container for phy nodes
> | according to phy.txt in the same directory
>
> So, it is driver bug ...ooOO (my personal bug :D)
Hi Oleksij
Ah, O.K. You should of explained that in the commit message.
Is the mdio support just in -rc, or is it older?
You need to add a Fixes: tag.
The patch subject should be [PATCH net] to indicate this is a fix to
the net tree
The patch should be against net, not next-next.
Andrew
On Mon, Sep 30, 2019 at 06:25:57PM +0200, Andrew Lunn wrote:
> On Mon, Sep 30, 2019 at 04:29:07PM +0200, Oleksij Rempel wrote:
> > On Mon, Sep 30, 2019 at 03:42:09PM +0200, Andrew Lunn wrote:
> > > On Mon, Sep 30, 2019 at 11:33:10AM +0200, Oleksij Rempel wrote:
> > > > The driver was working with fixed phy without any noticeable issues. This bug
> > > > was uncovered by introducing dsa ar9331-switch driver.
> > > >
> > > > Signed-off-by: Oleksij Rempel <[email protected]>
> > > > ---
> > > > drivers/net/ethernet/atheros/ag71xx.c | 6 ++++--
> > > > 1 file changed, 4 insertions(+), 2 deletions(-)
> > > >
> > > > diff --git a/drivers/net/ethernet/atheros/ag71xx.c b/drivers/net/ethernet/atheros/ag71xx.c
> > > > index 6703960c7cf5..d1101eea15c2 100644
> > > > --- a/drivers/net/ethernet/atheros/ag71xx.c
> > > > +++ b/drivers/net/ethernet/atheros/ag71xx.c
> > > > @@ -526,7 +526,7 @@ static int ag71xx_mdio_probe(struct ag71xx *ag)
> > > > struct device *dev = &ag->pdev->dev;
> > > > struct net_device *ndev = ag->ndev;
> > > > static struct mii_bus *mii_bus;
> > > > - struct device_node *np;
> > > > + struct device_node *np, *mnp;
> > > > int err;
> > > >
> > > > np = dev->of_node;
> > > > @@ -571,7 +571,9 @@ static int ag71xx_mdio_probe(struct ag71xx *ag)
> > > > msleep(200);
> > > > }
> > > >
> > > > - err = of_mdiobus_register(mii_bus, np);
> > > > + mnp = of_get_child_by_name(np, "mdio");
> > > > + err = of_mdiobus_register(mii_bus, mnp);
> > > > + of_node_put(mnp);
> > > > if (err)
> > > > goto mdio_err_put_clk;
> > >
> > > Hi Oleksij
> > >
> > > You need to keep backwards compatibility here. If you find an mdio
> > > node, use it, but if not, you need to still register np.
> > >
> > > This is also extending the driver binding, so you need to update the
> > > binding documentation.
> >
> > Hi Andrew,
> >
> > Normally i would agree. But in this case:
> > - this driver is freshly added to the kernel and is different to OpenWrt
> > implementation any way. No users from this side.
> > - Devicetree binding says:
> > Documentation/devicetree/bindings/net/qca,ar71xx.txt
> > |Optional properties:
> > |- phy-handle : phandle to the PHY device connected to this device.
> > |- fixed-link : Assume a fixed link. See fixed-link.txt in the same directory.
> > | Use instead of phy-handle.
> > |
> > |Optional subnodes:
> > |- mdio : specifies the mdio bus, used as a container for phy nodes
> > | according to phy.txt in the same directory
> >
> > So, it is driver bug ...ooOO (my personal bug :D)
>
> Hi Oleksij
>
> Ah, O.K. You should of explained that in the commit message.
>
> Is the mdio support just in -rc, or is it older?
>
> You need to add a Fixes: tag.
>
> The patch subject should be [PATCH net] to indicate this is a fix to
> the net tree
>
> The patch should be against net, not next-next.
Ok. thx! i'll fix it.
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |