ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.16-rc1/2.6.16-rc1-mm4/
- New git tree `git-davej-x86.patch': misc x86 things, maintained by David
Jones.
- Lots of USB updates. Please be sure to Cc:
[email protected] if something broke.
- Various other random bits and pieces. Things have been pretty quiet
lately - most activity seems to be concentrated about putting bugs into the
various subsystem trees.
- If you have a patch in -mm which you think should go into 2.6.16, it
doesn't hurt to remind me. There's quite a lot here which will go into
2.6.16.
Changes since 2.6.16-rc1-mm3:
linus.patch
git-acpi.patch
git-agpgart.patch
git-alsa.patch
git-arm.patch
git-audit.patch
git-blktrace.patch
git-block.patch
git-cfq.patch
git-cifs.patch
git-cpufreq.patch
git-davej-x86.patch
git-drm.patch
git-dvb.patch
git-ia64.patch
git-infiniband.patch
git-input.patch
git-kbuild.patch
git-libata-all.patch
git-netdev-all.patch
git-net.patch
git-ntfs.patch
git-ocfs2.patch
git-parisc.patch
git-powerpc.patch
git-serial.patch
git-sym2.patch
git-pcmcia.patch
git-scsi-rc-fixes.patch
git-sas-jg.patch
git-watchdog.patch
git-cryptodev.patch
git trees.
-drivers-serial-sh-scic-add-forgotten.patch
-sound-isa-cs423x-cs4236c-pnp-ids-for-netfinity-3000.patch
-enable-xfs-write-barrier.patch
-p4-clockmod-workaround-for-cpus-with-n60-errata.patch
-add-drm-support-for-radeon-x600.patch -drm-ati-use-null-instead-of-0.patch
-ati_pcigart-simplify-page_count-manipulations.patch
-drm-fix-sparse-warning-in-radeon-driver.patch
-media-video-stradis-memory-fix.patch
-gregkh-i2c-i2c-scx200_acb-07-docs-Kconfig-fix.patch
-pate_opti-build-fix.patch
-acenic-fix-checking-of-read_eeprom_byte-return-values.patch
-bonding-fix-get_settings-error-checking.patch
-gregkh-usb-usb-fix-ehci-early-handoff-issues-warning-fix.patch
-usb-yealink-printk-warning-fixes.patch
-gregkh-pci-msi-vector-targeting-abstractions-fix.patch
-sem2mutex-ioc4c.patch
-gusclassic-fix-adding-second-dma-channel.patch
-opl3sa2-fix-adding-second-dma-channel.patch
-drivers-acpi-make-two-functions-static.patch
-docbook-fix-some-comments-in-drivers-scsi.patch
Merged
+wrongly-marked-__init-__initdata-for-cpu-hotplug.patch
Sectioning fix
+ipmi-remove-invalid-acpi-register-spacing-check.patch
IPMI fix
+mips-gdb-stubc-fix-parse-error-before-token.patch
MIPS fix
+uml-compilation-fix-when-mode_skas-disabled.patch
UML fix
+git-acpi-fixup.patch
Fix rejects in git-acpi.patch
+git-blktrace-sparc64-fix.patch
Make git-blktrace compile on sparc64
+git-block-revert-stuff.patch
Revert buggy patch from git-block.patch
+gregkh-driver-spi-spi_butterfly-restore-lost-deltas.patch
+gregkh-driver-fix-uevent-buffer-overflow-in-input-layer.patch
+gregkh-driver-debugfs-trivial-comment-fix.patch
+gregkh-driver-aoe-do-not-stop-retransmit-timer-when-device-goes-down.patch
Driver tree updates
+at76c651-dont-do-generic-__ilog2-on-mips.patch
MIPS cleanup
-gregkh-i2c-i2c-i801-i2c-patch-for-intel-ich8.patch
Accidentally dropped.
+gregkh-i2c-i2c-fix-sx200_acb-build-on-other-arches.patch
I2C tree update
+drivers-mtd-use-array_size-macro.patch
+mtd-cmdlinepart-allow-zero-offset-value.patch
MTD fixes
+git-netdev-all-s2io-fixes.patch
Fix s2io changes in git-netdev-all.patch
+revert-NET-Do-not-lose-accepted-socket-when-ENFILE-EMFILE.patch
Revert buggy patch from git-net.patch.
+remove-arch-ppc-syslib-ppc4xx_pmc.patch
powerpc cleanup
+gregkh-pci-pci-handle-bogus-mcfg-entries.patch
+gregkh-pci-pci-fix-msi-build-breakage-in-x86_64.patch
+gregkh-pci-shpchp-cleanup-init_slots.patch
+gregkh-pci-shpchp-cleanup-shpchp_core.c.patch
+gregkh-pci-shpchp-cleanup-slot-list.patch
+gregkh-pci-shpchp-cleanup-controller-list.patch
+gregkh-pci-shpchp-cleanup-check-command-status.patch
+gregkh-pci-shpchp-bugfix-add-missing-serialization.patch
+gregkh-pci-pcihp_skeleton.c-cleanup.patch
+gregkh-pci-shpchp-replace-kmalloc-with-kzalloc-and-cleanup-arg-of-sizeof.patch
+gregkh-pci-shpchp-removed-unncessary-magic-member-from-slot.patch
+gregkh-pci-shpchp-move-slot-name-into-struct-slot.patch
+gregkh-pci-shpchp-fix-incorrect-return-value-of-interrupt-handler.patch
PCI tree updates
+fusion-add-support-for-raid-hot-add-del-support.patch
+fusion-target-reset-when-drive-is-being-removed.patch
+fusion-move-sas-persistent-event-handling-over-to-the-mptsas-module.patch
+fusion-fc-rport-code-fixes.patch
+fusion-bump-version.patch
mpt-fusion driver updates
+gregkh-usb-usb-fix-ehci-early-handoff-issues-warning.patch
+gregkh-usb-usb-hid-add-blacklist-entry-for-hp-keyboard.patch
+gregkh-usb-usb-ehci-another-full-speed-iso-fix.patch
+gregkh-usb-usb-uhci-no-fsbr-until-device-is-configured.patch
+gregkh-usb-usb-yealink-printk-warning-fix.patch
+gregkh-usb-usb-usb-authentication-states.patch
+gregkh-usb-usb-gadget-zero-and-dma-coherent-buffers.patch
+gregkh-usb-usb-mdc800.c-to-kzalloc.patch
+gregkh-usb-usb-kzalloc-for-storage.patch
+gregkh-usb-usb-kzalloc-for-hid.patch
+gregkh-usb-usb-kzalloc-in-dabusb.patch
+gregkh-usb-usb-kzalloc-in-w9968cf.patch
+gregkh-usb-usb-kzalloc-in-usbvideo.patch
+gregkh-usb-usb-kzalloc-in-cytherm.patch
+gregkh-usb-usb-kzalloc-in-idmouse.patch
+gregkh-usb-usb-kzalloc-in-ldusb.patch
+gregkh-usb-usb-kzalloc-in-phidgetinterfacekit.patch
+gregkh-usb-usb-kzalloc-in-phidgetservo.patch
+gregkh-usb-usb-kzalloc-in-usbled.patch
+gregkh-usb-usb-kzalloc-in-sisusbvga.patch
+gregkh-usb-usb-remove-the-obsolete-usb_midi-driver.patch
+gregkh-usb-usb-drivers-usb-core-message.c-make-usb_get_string-static.patch
+gregkh-usb-usb-remove-linux_version_code-macro-usage.patch
+gregkh-usb-usb-convert-a-bunch-of-usb-semaphores-to-mutexes.patch
+gregkh-usb-usb-ehci-and-nf2-quirk.patch
+gregkh-usb-usb-ehci-full-speed-iso-bugfixes.patch
+gregkh-usb-usb-ehci-for-freescale-83xx.patch
+gregkh-usb-usb-ehci-and-freescale-83xx-quirk.patch
+gregkh-usb-usb-ehci-for-au1200.patch
+gregkh-usb-usb-ohci-for-au1200.patch
+gregkh-usb-usb-ehci-unlink-tweaks.patch
+gregkh-usb-usb-add-support-for-ochi-on-at91rm9200.patch
+gregkh-usb-usb-add-support-for-at91-gadget.patch
+gregkh-usb-usb-minor-gadget-rndis-tweak.patch
+gregkh-usb-usb-fix-masking-bug-initialization-of-freescale-ehci-controller.patch
+gregkh-usb-recognize-three-more-usb-peripheral-controllers.patch
+gregkh-usb-usb-usbcore-sets-up-root-hubs-earlier.patch
+gregkh-usb-usb-ohci-uses-driver-model-wakeup-flags.patch
+gregkh-usb-uhci-use-one-qh-per-endpoint-not-per-urb.patch
+gregkh-usb-uhci-use-dummy-tds.patch
+gregkh-usb-uhci-remove-main-list-of-urbs.patch
+gregkh-usb-uhci-improve-debugging-code.patch
+gregkh-usb-uhci-don-t-log-short-transfers.patch
+gregkh-usb-usb-core-and-hcds-don-t-put_device-while-atomic.patch
+gregkh-usb-usb-serial-dynamic-id.patch
+gregkh-usb-usbip.patch
+gregkh-usb-usb-usbip-build-fix.patch
+gregkh-usb-usb-usbip-more-dead-code-fix.patch
+gregkh-usb-usb-usbip-warning-fixes.patch
+gregkh-usb-usb-gotemp.patch
+gregkh-usb-always-announce-new-usb-devices.patch
USB tree updates (gregkh-usb-usb-remove-usbcore-specific-wakeup-flags.patch
was buggy, dropped.)
+gregkh-usb-usb-convert-a-bunch-of-usb-semaphores-to-mutexes-fix.patch
Fix USB tree
-x86_64-apic-main-timer-default.patch
+x86_64-apic-main-timer-ati.patch
+x86_64-hangcheck-remove-message.patch
+x86_64-stack-random-large.patch
+x86_64-garbage-values-in-file--proc-net-sockstat.patch
+x86_64-bitops-cleanups.patch
+x86_64-mark-two-routines-as-__cpuinit.patch
+x86_64-impossible-per-cpu-data-workaround.patch
+x86_64-srat-check-size.patch
+x86_64-rename-node.patch
x86_64 tree updates
+kernel-posix-timersc-remove-do_posix_clock_notimer_create.patch
cleanup
+fix-deadlock-in-drivers-pci-msic.patch
+drivers-block-floppyc-dont-free_irq-from-irq-context.patch
+drivers-block-floppyc-dont-free_irq-from-irq-context-fix.patch
+fix-uidhash_lock-rcu-deadlock.patch
+fix-uidhash_lock-rcu-deadlock-fix.patch
+rcu_torture_lock-deadlock-fix.patch
+warn-if-free_irq-is-called-from-irq-context.patch
Various things from Ingo's lock validator.
+zone_reclaim-partial-scans-instead-of-full-scan.patch
Zone reclaim fix
+mm-page_alloc-less-atomics.patch
+mm-slab-less-atomics.patch
MM microoptimisations
+mm-split-highorder-pages-fix.patch
Fix mm-split-highorder-pages.patch
+hugepage-allocator-cleanup.patch
+kcalloc-int_max-ulong_max.patch
MM tweaks
+sh-sh4-202-microdev-updates.patch
+sh-make-peripheral-clock-frequency-setting-mandatory.patch
+sh-move-tra-expevt-intevt-definitions-for-reuse.patch
+sh-cleanup-struct-sh_cpuinfo-for-clock-framework-changes.patch
+sh-unknown-mach-type-updates.patch
+sh-drop-maskpos-from-make_ipr_irq-remove-duplicate-irq-definitions.patch
+sh-convert-voyagergx-to-platform-device-drop-sh-bus.patch
+sh-sh-sci-clock-framework-updates.patch
+sh-add-missing-timers-directory-rule-to-build.patch
+sh-machine_halt-machine_power_off-cleanups.patch
+sh-sh64-fix-bogus-tiocgicount-definitions.patch
SuperH update
+i386-__devinit-should-be-__cpuinit.patch
+i386-allow-disabling-x86_feature_sep-at-boot.patch
+i386-add-a-temporary-to-make-put_user-more-type-safe.patch
x86 fixes/features
+alpha-fix-getxpid-on-alpha-so-it-works-for-threads.patch
Alpha fix
+swsusp-userland-interface-update.patch
Update swsusp-userland-interface.patch
+xtensa-add-asm-futexh.patch
xtensa update
+s390-dasd-remove-dynamic-ioctl-registration-fix.patch
Fix s390-dasd-remove-dynamic-ioctl-registration.patch
-x86-x86_64-ia64-unify-mapping-from-pxm-to-node-id.patch
-x86-x86_64-ia64-unify-mapping-from-pxm-to-node-id-fix.patch
Dropped - am awaiting version 2.
+reduce-size-of-percpudata-and-make-sure-per_cpuobject-fix.patch
+txt-reduce-size-of-percpudata-and-make-sure-per_cpuobject-fix-2.patch
+reduce-size-of-percpudata-and-make-sure-per_cpuobject-fix-3.patch
Fix reduce-size-of-percpudata-and-make-sure-per_cpuobject.patch
+drivers-serial-jsm-cleanups.patch
JSM driver cleanup
+export-cpu-topology-by-sysfs.patch
+export-cpu-topology-by-sysfs-tidy.patch
+export-cpu-topology-by-sysfs-tidy-2.patch
Display CPU topology in sysfs,
+quota-fix-error-code-for-ext2_new_inode.patch
+fix-comment-to-synchronize_sched.patch
+compilation-of-kexec-kdump-broken-in-linux-2616-rc1.patch
+avoid-use-of-spinlock-for-percpu_counter.patch
+ipmi-mem_inout-=-intf_mem_inout.patch
+remove-fs-jffs2-histoh.patch
+new-tty-buffering-locking-fix.patch
+remove-isa-legacy-functions-drivers-char-toshibac.patch
+remove-isa-legacy-functions-drivers-net-arcnet.patch
+remove-isa-legacy-functions-drivers-scsi-g_ncr5380c.patch
+remove-isa-legacy-functions-drivers-scsi-in2000c.patch
+remove-isa-legacy-functions-drivers-net-hp-plusc.patch
+remove-isa-legacy-functions-drivers-net-hp100c.patch
+remove-isa-legacy-functions-drivers-net-lancec.patch
+remove-isa-legacy-functions-remove-the-helpers.patch
+remove-isa-legacy-functions-remove-documentation.patch
+bitmap-region-cleanup.patch
+bitmap-region-multiword-spanning-support.patch
+bitmap-region-restructuring.patch
+uninline-__sigqueue_free.patch
+free_uid-locking-improvement.patch
+represent-dirty__centisecs-as-jiffies-internally.patch
+represent-laptop_mode-as-jiffies-internally.patch
+range-checking-in-do_proc_dointvec_userhz_jiffies_conv.patch
+rcu_process_callbacks-dont-cli-while-testing-nxtlist.patch
+fs-9p-possible-cleanups.patch
+fs-ext2-proper-ext2_get_parent-prototype.patch
+fs-coda-proper-prototypes.patch
+#exec-only-allow-a-threaded-init-to-exec-from-the.patch
+exec-cleanup-exec-from-a-non-thread-group-leader.patch
+remove-dead-kill_sl-prototype-from-schedh.patch
+do_tty_hangup-use-group_send_sig_info-not.patch
+do_sak-dont-depend-on-session-id-0.patch
+pid-dont-hash-pid-0.patch
Random fies and cleanups
+reiser4-big-update-bug-fix-for-readpage-fix.patch
+reiser4-warnings-cleanup.patch
+reiser4-do-not-use-get_user_pages-and-do-not-check.patch
reiser4 fixes and cleanups
+always-enable-config_pdc202xx_force.patch
IDE Kconfig cleanup
+i810fb-do-not-probe-the-third-i2c-bus-by-default.patch
+fbdev-fix-usage-of-blank-value-passed-to-fb_blank.patch
fbdev updates
+mark-f_ops-const-in-the-inode-ppc-htab-fix.patch
Fix mark-f_ops-const-in-the-inode.patch
All 1029 patches:
ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.16-rc1/2.6.16-rc1-mm4/patch-list
On 1/29/06, Andrew Morton <[email protected]> wrote:
>
> ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.16-rc1/2.6.16-rc1-mm4/
>
[...]
>
> - If you have a patch in -mm which you think should go into 2.6.16, it
> doesn't hurt to remind me. There's quite a lot here which will go into
> 2.6.16.
>
Well, the following 4 patches have been in -mm for a while, are fairly
trivial and I've not heard any complains about them, so I guess they
might as well move on and get into 2.6.16 :
decrease-number-of-pointer-derefs-in-jsm_ttyc.patch
docs-update-missing-files-and-descriptions-for-filesystems-00-index.patch
reduce-nr-of-ptr-derefs-in-fs-jffs2-summaryc.patch
sound-remove-unneeded-kmalloc-return-value-casts.patch
--
Jesper Juhl <[email protected]>
Don't top-post http://www.catb.org/~esr/jargon/html/T/top-post.html
Plain text mails only, please http://www.expita.com/nomime.html
On Sun, Jan 29, 2006 at 02:45:33PM -0800, Andrew Morton wrote:
>...
> Changes since 2.6.16-rc1-mm3:
>...
> +i386-add-a-temporary-to-make-put_user-more-type-safe.patch
>
> x86 fixes/features
>...
This patch generates so many "ISO C90 forbids mixed declarations and code"
warnings that I start to consider Andrew's rejection of my "mark
virt_to_bus/bus_to_virt as __deprecated on i386" patch due to the
warnings it generates a personal insult...
cu
Adrian
--
"Is there not promise of rain?" Ling Tan asked suddenly out
of the darkness. There had been need of rain for many days.
"Only a promise," Lao Er said.
Pearl S. Buck - Dragon Seed
On Mon, 30 Jan 2006 00:34:03 +0100 Adrian Bunk wrote:
> On Sun, Jan 29, 2006 at 02:45:33PM -0800, Andrew Morton wrote:
> >...
> > Changes since 2.6.16-rc1-mm3:
> >...
> > +i386-add-a-temporary-to-make-put_user-more-type-safe.patch
> >
> > x86 fixes/features
> >...
>
> This patch generates so many "ISO C90 forbids mixed declarations and code"
> warnings that I start to consider Andrew's rejection of my "mark
> virt_to_bus/bus_to_virt as __deprecated on i386" patch due to the
> warnings it generates a personal insult...
I prefer to think of it as reasons why neither of them
should be merged.
---
~Randy
On Mon, Jan 30, 2006 at 12:34:03AM +0100, Adrian Bunk wrote:
> On Sun, Jan 29, 2006 at 02:45:33PM -0800, Andrew Morton wrote:
> >...
> > Changes since 2.6.16-rc1-mm3:
> >...
> > +i386-add-a-temporary-to-make-put_user-more-type-safe.patch
> >
> > x86 fixes/features
> >...
>
> This patch generates so many "ISO C90 forbids mixed declarations and code"
> warnings that I start to consider Andrew's rejection of my "mark
> virt_to_bus/bus_to_virt as __deprecated on i386" patch due to the
> warnings it generates a personal insult...
>...
In case it wasn't clear:
;-)
cu
Adrian
--
"Is there not promise of rain?" Ling Tan asked suddenly out
of the darkness. There had been need of rain for many days.
"Only a promise," Lao Er said.
Pearl S. Buck - Dragon Seed
Andrew Morton wrote:
>ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.16-rc1/2.6.16-rc1-mm4/
>
>- New git tree `git-davej-x86.patch': misc x86 things, maintained by David
> Jones.
>
>- Lots of USB updates. Please be sure to Cc:
> [email protected] if something broke.
>
>- Various other random bits and pieces. Things have been pretty quiet
> lately - most activity seems to be concentrated about putting bugs into the
> various subsystem trees.
>
>- If you have a patch in -mm which you think should go into 2.6.16, it
> doesn't hurt to remind me. There's quite a lot here which will go into
> 2.6.16.
>
>
Hi Andrew,
I get a lot of warnings like this one:
sound/core/seq/oss/seq_oss_ioctl.c:122: warning: ISO C90 forbids mixed
declarations and code
They appear to be caused by put_user. The following patch should fix that.
Signed-off-by: Brice Goglin <[email protected]>
Brice
On Sun, Jan 29, 2006 at 03:40:02PM -0800, Randy.Dunlap wrote:
> On Mon, 30 Jan 2006 00:34:03 +0100 Adrian Bunk wrote:
>
> > On Sun, Jan 29, 2006 at 02:45:33PM -0800, Andrew Morton wrote:
> > >...
> > > Changes since 2.6.16-rc1-mm3:
> > >...
> > > +i386-add-a-temporary-to-make-put_user-more-type-safe.patch
> > >
> > > x86 fixes/features
> > >...
> >
> > This patch generates so many "ISO C90 forbids mixed declarations and code"
> > warnings that I start to consider Andrew's rejection of my "mark
> > virt_to_bus/bus_to_virt as __deprecated on i386" patch due to the
> > warnings it generates a personal insult...
>
> I prefer to think of it as reasons why neither of them
> should be merged.
Some remarks:
I forgot the smiley.
If we want to get rid of a long deprecated API (as in the
virt_to_bus/bus_to_virt case), adding warnings could help making
maintainers aware of the fact that the API is deprecated.
In such cases the warnings are supposed to be present only temporarily
until the code using the deprecated API got fixed.
It might not be visible for people only using allyesconfig/allmodconfig,
but BROKEN_ON_SMP drivers often spit screenfuls of warnings. That's OK,
and most of them have been fixed during the last years.
And otherwise, we could simply remove __deprecated from the kernel.
Andrew rejected my patch to add -Werror-implicit-function-declaration to
the CFLAGS which helps us to avoid a certain class of nasty runtime
errors because it turned virt_to_bus/bus_to_virt link errors on powerpc
into compile errors (sic).
> ~Randy
cu
Adrian
--
"Is there not promise of rain?" Ling Tan asked suddenly out
of the darkness. There had been need of rain for many days.
"Only a promise," Lao Er said.
Pearl S. Buck - Dragon Seed
Adrian Bunk <[email protected]> wrote:
>
> n Sun, Jan 29, 2006 at 02:45:33PM -0800, Andrew Morton wrote:
> >...
> > Changes since 2.6.16-rc1-mm3:
> >...
> > +i386-add-a-temporary-to-make-put_user-more-type-safe.patch
> >
> > x86 fixes/features
> >...
>
> This patch generates so many "ISO C90 forbids mixed declarations and code"
> warnings that I start to consider Andrew's rejection of my "mark
> virt_to_bus/bus_to_virt as __deprecated on i386" patch due to the
> warnings it generates a personal insult...
Bah, that's what you get for using a slow compiler.
--- devel/include/asm-i386/uaccess.h~i386-add-a-temporary-to-make-put_user-more-type-safe-fix 2006-01-29 16:24:24.000000000 -0800
+++ devel-akpm/include/asm-i386/uaccess.h 2006-01-29 16:24:24.000000000 -0800
@@ -197,8 +197,9 @@ extern void __put_user_8(void);
#define put_user(x,ptr) \
({ int __ret_pu; \
+ __typeof__(*(ptr)) __pu_val; \
__chk_user_ptr(ptr); \
- __typeof__(*(ptr)) __pu_val = x; \
+ __pu_val = x; \
switch(sizeof(*(ptr))) { \
case 1: __put_user_1(__pu_val, ptr); break; \
case 2: __put_user_2(__pu_val, ptr); break; \
_
Andrew Morton <[email protected]> writes:
> Adrian Bunk <[email protected]> wrote:
>>
>> n Sun, Jan 29, 2006 at 02:45:33PM -0800, Andrew Morton wrote:
>> >...
>> > Changes since 2.6.16-rc1-mm3:
>> >...
>> > +i386-add-a-temporary-to-make-put_user-more-type-safe.patch
>> >
>> > x86 fixes/features
>> >...
>>
>> This patch generates so many "ISO C90 forbids mixed declarations and code"
>> warnings that I start to consider Andrew's rejection of my "mark
>> virt_to_bus/bus_to_virt as __deprecated on i386" patch due to the
>> warnings it generates a personal insult...
>
> Bah, that's what you get for using a slow compiler.
Doh. I thought __chk_user_ptr(ptr) was some kind of sparse annotation
and not code.
Thanks for catching this.
Eric
On Mon, 30 Jan 2006 00:58:53 +0100 Adrian Bunk wrote:
> On Sun, Jan 29, 2006 at 03:40:02PM -0800, Randy.Dunlap wrote:
> > On Mon, 30 Jan 2006 00:34:03 +0100 Adrian Bunk wrote:
> >
> > > On Sun, Jan 29, 2006 at 02:45:33PM -0800, Andrew Morton wrote:
> > > >...
> > > > Changes since 2.6.16-rc1-mm3:
> > > >...
> > > > +i386-add-a-temporary-to-make-put_user-more-type-safe.patch
> > > >
> > > > x86 fixes/features
> > > >...
> > >
> > > This patch generates so many "ISO C90 forbids mixed declarations and code"
> > > warnings that I start to consider Andrew's rejection of my "mark
> > > virt_to_bus/bus_to_virt as __deprecated on i386" patch due to the
> > > warnings it generates a personal insult...
> >
> > I prefer to think of it as reasons why neither of them
> > should be merged.
>
>
> Some remarks:
>
>
> I forgot the smiley.
OK. I guess I should not have replied at all then.
> If we want to get rid of a long deprecated API (as in the
> virt_to_bus/bus_to_virt case), adding warnings could help making
> maintainers aware of the fact that the API is deprecated.
I seriously expect that the maintainers are already aware
of that. It's not new(s).
> In such cases the warnings are supposed to be present only temporarily
> until the code using the deprecated API got fixed.
>
> It might not be visible for people only using allyesconfig/allmodconfig,
> but BROKEN_ON_SMP drivers often spit screenfuls of warnings. That's OK,
> and most of them have been fixed during the last years.
>
> And otherwise, we could simply remove __deprecated from the kernel.
>
> Andrew rejected my patch to add -Werror-implicit-function-declaration to
> the CFLAGS which helps us to avoid a certain class of nasty runtime
> errors because it turned virt_to_bus/bus_to_virt link errors on powerpc
> into compile errors (sic).
>
>
> > ~Randy
>
> cu
> Adrian
---
~Randy
On Sun, Jan 29, 2006 at 04:51:23PM -0800, Randy.Dunlap wrote:
> On Mon, 30 Jan 2006 00:58:53 +0100 Adrian Bunk wrote:
>...
> > If we want to get rid of a long deprecated API (as in the
> > virt_to_bus/bus_to_virt case), adding warnings could help making
> > maintainers aware of the fact that the API is deprecated.
>
> I seriously expect that the maintainers are already aware
> of that. It's not new(s).
>...
Looking at which drivers still use this API, I'm seeing some drivers
with active maintainers still using this API.
And for others, warnings might increase the probability of someone
fixing them for getting rid of the warnings...
> ~Randy
cu
Adrian
--
"Is there not promise of rain?" Ling Tan asked suddenly out
of the darkness. There had been need of rain for many days.
"Only a promise," Lao Er said.
Pearl S. Buck - Dragon Seed
On Sun, Jan 29, 2006 at 02:45:33PM -0800, Andrew Morton wrote:
>
>
ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.16-rc1/2.6.16-rc1-mm4/
IA64 defconfig breaks with:
CC arch/ia64/sn/pci/tioce_provider.o
/home/muli/kernel/common-swiotlb/mm4.swiotlb/arch/ia64/sn/pci/tioce_provider.c:721:32:
macro "ATE_MAKE" requires 3 arguments, but only 2 given
/home/muli/kernel/common-swiotlb/mm4.swiotlb/arch/ia64/sn/pci/tioce_provider.c:
In function `tioce_reserve_m32':
Attached patch fixes it. Mark, looks like it's your Altix MSI support
patch (http://patchwork.ozlabs.org/linuxppc64/patch?id=4231) that
broke it. Is the fix correct?
Signed-off-by: Muli Ben-Yehuda <[email protected]>
diff -Naurp --exclude-from /home/muli/w/dontdiff mm4.orig/arch/ia64/sn/pci/tioce_provider.c mm4.ate/arch/ia64/sn/pci/tioce_provider.c
--- mm4.orig/arch/ia64/sn/pci/tioce_provider.c 2006-01-30 10:34:57.000000000 +0200
+++ mm4.ate/arch/ia64/sn/pci/tioce_provider.c 2006-01-30 11:27:58.000000000 +0200
@@ -717,7 +717,7 @@ tioce_reserve_m32(struct tioce_kernel *c
while (ate_index <= last_ate) {
u64 ate;
- ate = ATE_MAKE(0xdeadbeef, ps);
+ ate = ATE_MAKE(0xdeadbeef, ps, 0);
ce_kern->ce_ate3240_shadow[ate_index] = ate;
tioce_mmr_storei(ce_kern, &ce_mmr->ce_ure_ate3240[ate_index],
ate);
--
Muli Ben-Yehuda
http://www.mulix.org | http://mulix.livejournal.com/
Does this release eat reiser3 partitions? Or am I save to boot it? ;) I'm
currently not willing to re-install my system but I'd like to test -mm...
Marc
Marc Koschewski <[email protected]> wrote:
>
> Does this release eat reiser3 partitions?
>
I hope not. There were some bad reiser3 patches a couple of -mm's ago, but
they were hastily dropped.
* Andrew Morton <[email protected]> [2006-01-30 03:31:55 -0800]:
> Marc Koschewski <[email protected]> wrote:
> >
> > Does this release eat reiser3 partitions?
> >
>
> I hope not. There were some bad reiser3 patches a couple of -mm's ago, but
> they were hastily dropped.
Andrew,
as already asked a couple of weeks ago: do we have a chance to be able
to checkout the -mm tree with git someday? It would be very convenient. ;)
Regards,
Marc
Andrew Morton wrote:
> - Various other random bits and pieces. Things have been pretty quiet
> lately - most activity seems to be concentrated about putting bugs into
> the various subsystem trees.
Does it fix the DRM_i810 hang during a suspend-to-ram/disk cycle?
Thanks!
--
Al
sorry 'bout that ...
Yes, this is the coorect fix. thanks.
Mark
On Mon, Jan 30, 2006 at 11:40:49AM +0200, Muli Ben-Yehuda wrote:
> On Sun, Jan 29, 2006 at 02:45:33PM -0800, Andrew Morton wrote:
> >
> >
> ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.16-rc1/2.6.16-rc1-mm4/
>
> IA64 defconfig breaks with:
>
> CC arch/ia64/sn/pci/tioce_provider.o
> /home/muli/kernel/common-swiotlb/mm4.swiotlb/arch/ia64/sn/pci/tioce_provider.c:721:32:
> macro "ATE_MAKE" requires 3 arguments, but only 2 given
> /home/muli/kernel/common-swiotlb/mm4.swiotlb/arch/ia64/sn/pci/tioce_provider.c:
> In function `tioce_reserve_m32':
>
> Attached patch fixes it. Mark, looks like it's your Altix MSI support
> patch (http://patchwork.ozlabs.org/linuxppc64/patch?id=4231) that
> broke it. Is the fix correct?
>
> Signed-off-by: Muli Ben-Yehuda <[email protected]>
>
> diff -Naurp --exclude-from /home/muli/w/dontdiff mm4.orig/arch/ia64/sn/pci/tioce_provider.c mm4.ate/arch/ia64/sn/pci/tioce_provider.c
> --- mm4.orig/arch/ia64/sn/pci/tioce_provider.c 2006-01-30 10:34:57.000000000 +0200
> +++ mm4.ate/arch/ia64/sn/pci/tioce_provider.c 2006-01-30 11:27:58.000000000 +0200
> @@ -717,7 +717,7 @@ tioce_reserve_m32(struct tioce_kernel *c
> while (ate_index <= last_ate) {
> u64 ate;
>
> - ate = ATE_MAKE(0xdeadbeef, ps);
> + ate = ATE_MAKE(0xdeadbeef, ps, 0);
> ce_kern->ce_ate3240_shadow[ate_index] = ate;
> tioce_mmr_storei(ce_kern, &ce_mmr->ce_ure_ate3240[ate_index],
> ate);
>
>
> --
> Muli Ben-Yehuda
> http://www.mulix.org | http://mulix.livejournal.com/
On Mon, Jan 30, 2006 at 07:52:14AM -0600, Mark Maule wrote:
> sorry 'bout that ...
>
> Yes, this is the coorect fix. thanks.
Ok, Andrew, please apply...
Cheers,
Muli
--
Muli Ben-Yehuda
http://www.mulix.org | http://mulix.livejournal.com/
Marc Koschewski wrote:
>Andrew,
>
> as already asked a couple of weeks ago: do we have a chance to be able
>to checkout the -mm tree with git someday? It would be very convenient. ;)
Search archive (a week or 2)...
regards,
--
Jiri Slaby http://www.fi.muni.cz/~xslaby
~\-/~ [email protected] ~\-/~
B67499670407CE62ACC8 22A032CC55C339D47A7E
Jiri Slaby wrote:
>Marc Koschewski wrote:
>>Andrew,
>>
>> as already asked a couple of weeks ago: do we have a chance to be able
>>to checkout the -mm tree with git someday? It would be very convenient. ;)
>Search archive (a week or 2)...
Ignore me.
regards,
--
Jiri Slaby http://www.fi.muni.cz/~xslaby
~\-/~ [email protected] ~\-/~
B67499670407CE62ACC8 22A032CC55C339D47A7E
On Mon, 30 Jan 2006, Jiri Slaby wrote:
> Jiri Slaby wrote:
> >Marc Koschewski wrote:
> >>Andrew,
> >>
> >> as already asked a couple of weeks ago: do we have a chance to be able
> >>to checkout the -mm tree with git someday? It would be very convenient. ;)
> >Search archive (a week or 2)...
> Ignore me.
Matthias Urlichs did import 2.6.15-mm3 into a git:
http://marc.theaimsgroup.com/?l=linux-kernel&m=113726055823770&w=2
but I don't see any more recent ones there:
http://www.kernel.org/git/?p=linux/kernel/git/smurf/linux-trees.git;a=summary
--
~Randy
Andrew Morton wrote:
> ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.16-rc1/2.6.16-rc1-mm4/
In vgacon.c, there is a stray printk("vgacon delta: %i\n", lines); which
effectively disables the scrollback of the vga console (at least when
not using the new soft scrollback). Removing it fixes the problem.
--
Jindrich Makovicka
Andrew Morton wrote:
> ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.16-rc1/2.6.16-rc1-mm4/
>
> - New git tree `git-davej-x86.patch': misc x86 things, maintained by David
> Jones.
>
> - Lots of USB updates. Please be sure to Cc:
> [email protected] if something broke.
>
> - Various other random bits and pieces. Things have been pretty quiet
> lately - most activity seems to be concentrated about putting bugs into the
> various subsystem trees.
>
> - If you have a patch in -mm which you think should go into 2.6.16, it
> doesn't hurt to remind me. There's quite a lot here which will go into
> 2.6.16.
On a more positive note than usual, AFAICS this pretty much works on all
the platforms I was looking at on http://test.kernel.org ... performance
regressions gone and everything. Happy test people boing boing boing ;-)
M.
"Randy.Dunlap" <[email protected]> wrote:
>
> On Mon, 30 Jan 2006, Jiri Slaby wrote:
>
> > Jiri Slaby wrote:
> > >Marc Koschewski wrote:
> > >>Andrew,
> > >>
> > >> as already asked a couple of weeks ago: do we have a chance to be able
> > >>to checkout the -mm tree with git someday? It would be very convenient. ;)
> > >Search archive (a week or 2)...
> > Ignore me.
>
> Matthias Urlichs did import 2.6.15-mm3 into a git:
> http://marc.theaimsgroup.com/?l=linux-kernel&m=113726055823770&w=2
>
I've asked Matthias for a copy of his scripts, but there's some bug still
to be fixed, apparently. quitl2git is an option too.
Basically I need some script which just does it all and then shoves it
at kernel.org, but getting into another big fight with git doesn't appeal a
lot right now.
Al Boldi <[email protected]> wrote:
>
> Andrew Morton wrote:
> > - Various other random bits and pieces. Things have been pretty quiet
> > lately - most activity seems to be concentrated about putting bugs into
> > the various subsystem trees.
>
> Does it fix the DRM_i810 hang during a suspend-to-ram/disk cycle?
>
I don't know - I don't watch every patch which goes into 49 different
trees. Did you try it?
Andrew Morton wrote:
> Al Boldi <[email protected]> wrote:
> > Andrew Morton wrote:
> > > - Various other random bits and pieces. Things have been pretty quiet
> > > lately - most activity seems to be concentrated about putting bugs
> > > into the various subsystem trees.
> >
> > Does it fix the DRM_i810 hang during a suspend-to-ram/disk cycle?
>
> I don't know - I don't watch every patch which goes into 49 different
> trees. Did you try it?
It still hangs w/ drm.
w/o drm STD works like a charm.
w/o drm STR works lest this t/o and a noisy display in X.
Stopping tasks: ========================|
Suspending device 0.1
Suspending device 0.0
Suspending device ide0
Suspending device floppy.0
Suspending device serio1
Suspending device serio0
Suspending device i8042
Suspending device 0000:01:0a.0
Suspending device 0000:01:05.0
Suspending device 0000:00:1f.2
Suspending device 0000:00:1f.1
Suspending device 0000:00:1f.0
Suspending device 0000:00:1e.0
Suspending device 0000:00:01.0
Suspending device 0000:00:00.0
Suspending device pci0000:00
Suspending device platform
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Back to C!
ACPI: PCI Interrupt 0000:00:01.0[A] -> Link [LNKA] -> GSI 11 (level, low) ->
IRQ 11
PCI: Setting latency timer of device 0000:00:1e.0 to 64
eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
hda: drive not ready on wakeup
hda: status timeout: status=0xd0 { Busy }
ide: failed opcode was: unknown
hda: DMA disabled
hdb: DMA disabled
hda: drive not ready for command
ide0: reset: success
BUG: warning at drivers/ide/ide-iops.c:1235/ide_wait_not_busy()
<c02612e2> ide_wait_not_busy+0xa2/0xb0 <c025ee87>
start_request+0x1a7/0x230
<c025f17a> ide_do_request+0x23a/0x3c0 <c026440a>
set_multmode_intr+0x1a/0x70
<c025f79b> ide_intr+0xeb/0x130 <c02643f0> set_multmode_intr+0x0/0x70
<c0135610> handle_IRQ_event+0x30/0x70 <c01356a5> __do_IRQ+0x55/0xc0
<c0105672> do_IRQ+0x42/0x70
=======================
<c0103976> common_interrupt+0x1a/0x20 <c021886d>
acpi_processor_idle+0x2b6/0x332
<c0101030> default_idle+0x0/0x70 <c0101118> cpu_idle+0x58/0x70
<c03c47bd> start_kernel+0x14d/0x170 <c03c4310>
unknown_bootoption+0x0/0x1e0
hdb: set_drive_speed_status: status=0x40 { DriveReady }
ide: failed opcode was: unknown
Restarting tasks... done
Also, a 100HZ recompile in mainline causes a 400% delay doing a simple lilo,
which seems fixed in mm. Is there a reason you can't move that to mainline?
Thanks!
--
Al
Jindrich Makovicka wrote:
>In vgacon.c, there is a stray printk("vgacon delta: %i\n", lines); which
>effectively disables the scrollback of the vga console (at least when
>not using the new soft scrollback). Removing it fixes the problem.
Then ... could you post a patch?
regards,
--
Jiri Slaby http://www.fi.muni.cz/~xslaby
~\-/~ [email protected] ~\-/~
B67499670407CE62ACC8 22A032CC55C339D47A7E
--- linux-2.6.16-rc1-mm4/drivers/video/console/vgacon.c 2006-01-25 19:16:35.000000000 +0100
+++ linux-2.6.16-rc1-mm4/drivers/video/console/vgacon.c 2006-01-31 21:33:40.433055896 +0100
@@ -331,7 +331,6 @@
int margin = c->vc_size_row * 4;
int ul, we, p, st;
- printk("vgacon delta: %i\n", lines);
if (vga_rolled_over >
(c->vc_scr_end - vga_vram_base) + margin) {
ul = c->vc_scr_end - vga_vram_base;
Jindrich Makovicka wrote:
>Jiri Slaby wrote:
>> Jindrich Makovicka wrote:
>>>In vgacon.c, there is a stray printk("vgacon delta: %i\n", lines); which
>>>effectively disables the scrollback of the vga console (at least when
>>>not using the new soft scrollback). Removing it fixes the problem.
>> Then ... could you post a patch?
>if you insist :)
Ok, but not that way -- append at least Sign-off (see
Documentation/SubmittingPatches) to allow somebody push it to right places.
And do not remove cc people, please, when replying.
>--- linux-2.6.16-rc1-mm4/drivers/video/console/vgacon.c 2006-01-25 19:16:35.000000000 +0100
>+++ linux-2.6.16-rc1-mm4/drivers/video/console/vgacon.c 2006-01-31 21:33:40.433055896 +0100
>@@ -331,7 +331,6 @@
> int margin = c->vc_size_row * 4;
> int ul, we, p, st;
>
>- printk("vgacon delta: %i\n", lines);
> if (vga_rolled_over >
> (c->vc_scr_end - vga_vram_base) + margin) {
> ul = c->vc_scr_end - vga_vram_base;
>
>
regards,
--
Jiri Slaby http://www.fi.muni.cz/~xslaby
~\-/~ [email protected] ~\-/~
B67499670407CE62ACC8 22A032CC55C339D47A7E
Al Boldi <[email protected]> wrote:
>
> Andrew Morton wrote:
> > Al Boldi <[email protected]> wrote:
> > > Andrew Morton wrote:
> > > > - Various other random bits and pieces. Things have been pretty quiet
> > > > lately - most activity seems to be concentrated about putting bugs
> > > > into the various subsystem trees.
> > >
> > > Does it fix the DRM_i810 hang during a suspend-to-ram/disk cycle?
> >
> > I don't know - I don't watch every patch which goes into 49 different
> > trees. Did you try it?
>
> It still hangs w/ drm.
>
> w/o drm STD works like a charm.
OK.
> w/o drm STR works lest this t/o and a noisy display in X.
What do "lest" and "t/o" mean? Please use less abbreviations.
> Stopping tasks: ========================|
> Suspending device 0.1
> Suspending device 0.0
> Suspending device ide0
> Suspending device floppy.0
> Suspending device serio1
> Suspending device serio0
> Suspending device i8042
> Suspending device 0000:01:0a.0
> Suspending device 0000:01:05.0
> Suspending device 0000:00:1f.2
> Suspending device 0000:00:1f.1
> Suspending device 0000:00:1f.0
> Suspending device 0000:00:1e.0
> Suspending device 0000:00:01.0
> Suspending device 0000:00:00.0
> Suspending device pci0000:00
> Suspending device platform
> Intel machine check architecture supported.
> Intel machine check reporting enabled on CPU#0.
> Back to C!
> ACPI: PCI Interrupt 0000:00:01.0[A] -> Link [LNKA] -> GSI 11 (level, low) ->
> IRQ 11
> PCI: Setting latency timer of device 0000:00:1e.0 to 64
> eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
> hda: drive not ready on wakeup
> hda: status timeout: status=0xd0 { Busy }
> ide: failed opcode was: unknown
> hda: DMA disabled
> hdb: DMA disabled
> hda: drive not ready for command
> ide0: reset: success
> BUG: warning at drivers/ide/ide-iops.c:1235/ide_wait_not_busy()
> <c02612e2> ide_wait_not_busy+0xa2/0xb0 <c025ee87>
> start_request+0x1a7/0x230
> <c025f17a> ide_do_request+0x23a/0x3c0 <c026440a>
> set_multmode_intr+0x1a/0x70
> <c025f79b> ide_intr+0xeb/0x130 <c02643f0> set_multmode_intr+0x0/0x70
> <c0135610> handle_IRQ_event+0x30/0x70 <c01356a5> __do_IRQ+0x55/0xc0
> <c0105672> do_IRQ+0x42/0x70
> =======================
> <c0103976> common_interrupt+0x1a/0x20 <c021886d>
> acpi_processor_idle+0x2b6/0x332
> <c0101030> default_idle+0x0/0x70 <c0101118> cpu_idle+0x58/0x70
> <c03c47bd> start_kernel+0x14d/0x170 <c03c4310>
> unknown_bootoption+0x0/0x1e0
> hdb: set_drive_speed_status: status=0x40 { DriveReady }
> ide: failed opcode was: unknown
> Restarting tasks... done
The above is an IDE problem. Are you saying that the above only occurs
when DRM is enabled?
Please take more time and use more words when describing this problem, thanks.
> Also, a 100HZ recompile in mainline causes a 400% delay doing a simple lilo,
> which seems fixed in mm. Is there a reason you can't move that to mainline?
Again, I don't understand what that means. Are you saying that a kernel
compiled with HZ=100 takes 4 times as long to run lilo?
Jindrich Makovicka wrote:
> Jiri Slaby wrote:
>> Jindrich Makovicka wrote:
>>
>>> In vgacon.c, there is a stray printk("vgacon delta: %i\n", lines); which
>>> effectively disables the scrollback of the vga console (at least when
>>> not using the new soft scrollback). Removing it fixes the problem.
>> Then ... could you post a patch?
>
> if you insist :)
Sorry about that, thanks for noticing.
Acked-by: Antonino Daplas <[email protected]>
>
>
>
> ------------------------------------------------------------------------
>
> --- linux-2.6.16-rc1-mm4/drivers/video/console/vgacon.c 2006-01-25 19:16:35.000000000 +0100
> +++ linux-2.6.16-rc1-mm4/drivers/video/console/vgacon.c 2006-01-31 21:33:40.433055896 +0100
> @@ -331,7 +331,6 @@
> int margin = c->vc_size_row * 4;
> int ul, we, p, st;
>
> - printk("vgacon delta: %i\n", lines);
> if (vga_rolled_over >
> (c->vc_scr_end - vga_vram_base) + margin) {
> ul = c->vc_scr_end - vga_vram_base;
On Tue, 31 Jan 2006 14:01:07 -0800 Andrew Morton wrote:
> Al Boldi <[email protected]> wrote:
> >
> > Andrew Morton wrote:
> > > Al Boldi <[email protected]> wrote:
> > > > Andrew Morton wrote:
> > > > > - Various other random bits and pieces. Things have been pretty quiet
> > > > > lately - most activity seems to be concentrated about putting bugs
> > > > > into the various subsystem trees.
> > > >
> > > > Does it fix the DRM_i810 hang during a suspend-to-ram/disk cycle?
> > >
> > > I don't know - I don't watch every patch which goes into 49 different
> > > trees. Did you try it?
> >
> > It still hangs w/ drm.
> >
> > w/o drm STD works like a charm.
>
> OK.
>
> > w/o drm STR works lest this t/o and a noisy display in X.
>
> What do "lest" and "t/o" mean? Please use less abbreviations.
"lest" seems to be a real word... maybe a bit dated.
t/o is 'timeout'.
> > Stopping tasks: ========================|
> > Suspending device 0.1
> > Suspending device 0.0
> > Suspending device ide0
> > Suspending device floppy.0
> > Suspending device serio1
> > Suspending device serio0
> > Suspending device i8042
> > Suspending device 0000:01:0a.0
> > Suspending device 0000:01:05.0
> > Suspending device 0000:00:1f.2
> > Suspending device 0000:00:1f.1
> > Suspending device 0000:00:1f.0
> > Suspending device 0000:00:1e.0
> > Suspending device 0000:00:01.0
> > Suspending device 0000:00:00.0
> > Suspending device pci0000:00
> > Suspending device platform
> > Intel machine check architecture supported.
> > Intel machine check reporting enabled on CPU#0.
> > Back to C!
> > ACPI: PCI Interrupt 0000:00:01.0[A] -> Link [LNKA] -> GSI 11 (level, low) ->
> > IRQ 11
> > PCI: Setting latency timer of device 0000:00:1e.0 to 64
> > eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
> > hda: drive not ready on wakeup
> > hda: status timeout: status=0xd0 { Busy }
> > ide: failed opcode was: unknown
> > hda: DMA disabled
> > hdb: DMA disabled
> > hda: drive not ready for command
> > ide0: reset: success
> > BUG: warning at drivers/ide/ide-iops.c:1235/ide_wait_not_busy()
> > <c02612e2> ide_wait_not_busy+0xa2/0xb0 <c025ee87>
> > start_request+0x1a7/0x230
> > <c025f17a> ide_do_request+0x23a/0x3c0 <c026440a>
> > set_multmode_intr+0x1a/0x70
> > <c025f79b> ide_intr+0xeb/0x130 <c02643f0> set_multmode_intr+0x0/0x70
> > <c0135610> handle_IRQ_event+0x30/0x70 <c01356a5> __do_IRQ+0x55/0xc0
> > <c0105672> do_IRQ+0x42/0x70
> > =======================
> > <c0103976> common_interrupt+0x1a/0x20 <c021886d>
> > acpi_processor_idle+0x2b6/0x332
> > <c0101030> default_idle+0x0/0x70 <c0101118> cpu_idle+0x58/0x70
> > <c03c47bd> start_kernel+0x14d/0x170 <c03c4310>
> > unknown_bootoption+0x0/0x1e0
> > hdb: set_drive_speed_status: status=0x40 { DriveReady }
> > ide: failed opcode was: unknown
> > Restarting tasks... done
>
> The above is an IDE problem. Are you saying that the above only occurs
> when DRM is enabled?
>
> Please take more time and use more words when describing this problem, thanks.
>
> > Also, a 100HZ recompile in mainline causes a 400% delay doing a simple lilo,
> > which seems fixed in mm. Is there a reason you can't move that to mainline?
>
> Again, I don't understand what that means. Are you saying that a kernel
> compiled with HZ=100 takes 4 times as long to run lilo?
---
~Randy
My bisect script told me that
Sucker is git-alsa.patch
---------------------------------------------
EIP is at remove_proc_entry
Process rmmod
snd_info_unregister [snd]
snd_pcm_oss_proc_done [snd_pcm_oss]
snd_pcm_oss_unregister_minor [snd_pcm_oss]
snd_pcm_notify [snd_pcm]
sys_delete_module
do_munmap
syscall_call
.config
-------
CONFIG_SOUND=m
CONFIG_SND=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
# CONFIG_SND_SEQUENCER is not set
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
# CONFIG_SND_PCM_OSS_PLUGINS is not set
# CONFIG_SND_RTCTIMER is not set
# CONFIG_SND_DYNAMIC_MINORS is not set
# CONFIG_SND_SUPPORT_OLD_API is not set
# CONFIG_SND_VERBOSE_PROCFS is not set
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
CONFIG_SND_AC97_CODEC=m
CONFIG_SND_AC97_BUS=m
CONFIG_SND_INTEL8X0=m
Hi Andrew-san.
> -x86-x86_64-ia64-unify-mapping-from-pxm-to-node-id.patch
> -x86-x86_64-ia64-unify-mapping-from-pxm-to-node-id-fix.patch
>
> Dropped - am awaiting version 2.
Should I repost this patch which includes fixes as a ver.2 ?
I already posted fix patches for them.
http://marc.theaimsgroup.com/?l=linux-kernel&m=113841952421236&w=2
http://marc.theaimsgroup.com/?l=linux-kernel&m=113841952421512&w=2
http://marc.theaimsgroup.com/?l=linux-kernel&m=113841952428750&w=2
But, if you lost my first patch by managing too many patches,
I'll repost total patch as ver.2.
Thanks.
--
Yasunori Goto
Yasunori Goto <[email protected]> wrote:
>
>
> Hi Andrew-san.
>
> > -x86-x86_64-ia64-unify-mapping-from-pxm-to-node-id.patch
> > -x86-x86_64-ia64-unify-mapping-from-pxm-to-node-id-fix.patch
> >
> > Dropped - am awaiting version 2.
>
> Should I repost this patch which includes fixes as a ver.2 ?
> I already posted fix patches for them.
> http://marc.theaimsgroup.com/?l=linux-kernel&m=113841952421236&w=2
> http://marc.theaimsgroup.com/?l=linux-kernel&m=113841952421512&w=2
> http://marc.theaimsgroup.com/?l=linux-kernel&m=113841952428750&w=2
Yes, I threw up my hands in horror and dropped everything.
> But, if you lost my first patch by managing too many patches,
> I'll repost total patch as ver.2.
>
Yes, please resend everything, as a logical sequence-numbered patch series
(not patch1, fix-to-patch1, patch2, fix-to-patch2, etc) with no reference
to the previous patches and with full changelogs and with Signed-off-by:s
and everything else.
On Sun, Jan 29, 2006 at 02:45:33PM -0800, Andrew Morton took 397 lines to write:
>
> ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.16-rc1/2.6.16-rc1-mm4/
depmod loop:
$ sudo make modules_install:
...
INSTALL sound/soundcore.ko
if [ -r System.map -a -x /sbin/depmod ]; then /sbin/depmod -ae -F
System.map 2.6.16-rc1-mm4krw-1; fi
WARNING: Loop detected:
/lib/modules/2.6.16-rc1-mm4krw-1/kernel/drivers/serial/8250.ko needs
serial_core.ko which needs 8250.ko again!
WARNING: Module
/lib/modules/2.6.16-rc1-mm4krw-1/kernel/drivers/serial/8250.ko
ignored, due to loop
WARNING: Module
/lib/modules/2.6.16-rc1-mm4krw-1/kernel/drivers/serial/serial_core.ko
ignored, due to loop
WARNING: Module
/lib/modules/2.6.16-rc1-mm4krw-1/kernel/drivers/serial/8250_pci.ko
ignored, due to loop
[~/kernel/linux-2.6.16-rc1-mm4]$
Kurt
--
The Arkansas legislature passed a law that states that the Arkansas
River can rise no higher than to the Main Street bridge in Little
Rock.
Kurt Wall <[email protected]> wrote:
>
> On Sun, Jan 29, 2006 at 02:45:33PM -0800, Andrew Morton took 397 lines to write:
> >
> > ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.16-rc1/2.6.16-rc1-mm4/
>
> depmod loop:
>
> $ sudo make modules_install:
> ...
> INSTALL sound/soundcore.ko
> if [ -r System.map -a -x /sbin/depmod ]; then /sbin/depmod -ae -F
> System.map 2.6.16-rc1-mm4krw-1; fi
> WARNING: Loop detected:
> /lib/modules/2.6.16-rc1-mm4krw-1/kernel/drivers/serial/8250.ko needs
> serial_core.ko which needs 8250.ko again!
> WARNING: Module
> /lib/modules/2.6.16-rc1-mm4krw-1/kernel/drivers/serial/8250.ko
> ignored, due to loop
> WARNING: Module
> /lib/modules/2.6.16-rc1-mm4krw-1/kernel/drivers/serial/serial_core.ko
> ignored, due to loop
> WARNING: Module
> /lib/modules/2.6.16-rc1-mm4krw-1/kernel/drivers/serial/8250_pci.ko
> ignored, due to loop
> [~/kernel/linux-2.6.16-rc1-mm4]$
>
ah. .config, please?
> The Arkansas legislature passed a law that states that the Arkansas
> River can rise no higher than to the Main Street bridge in Little
> Rock.
Easy: a pontoon bridge.
On Tue, Jan 31, 2006 at 08:40:45PM -0800, Andrew Morton took 41 lines to write:
> Kurt Wall <[email protected]> wrote:
> >
> > On Sun, Jan 29, 2006 at 02:45:33PM -0800, Andrew Morton took 397 lines to write:
> > >
> > > ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.16-rc1/2.6.16-rc1-mm4/
> >
> > depmod loop:
> >
> > $ sudo make modules_install:
> > ...
> > INSTALL sound/soundcore.ko
> > if [ -r System.map -a -x /sbin/depmod ]; then /sbin/depmod -ae -F
> > System.map 2.6.16-rc1-mm4krw-1; fi
> > WARNING: Loop detected:
> > /lib/modules/2.6.16-rc1-mm4krw-1/kernel/drivers/serial/8250.ko needs
> > serial_core.ko which needs 8250.ko again!
> > WARNING: Module
> > /lib/modules/2.6.16-rc1-mm4krw-1/kernel/drivers/serial/8250.ko
> > ignored, due to loop
> > WARNING: Module
> > /lib/modules/2.6.16-rc1-mm4krw-1/kernel/drivers/serial/serial_core.ko
> > ignored, due to loop
> > WARNING: Module
> > /lib/modules/2.6.16-rc1-mm4krw-1/kernel/drivers/serial/8250_pci.ko
> > ignored, due to loop
> > [~/kernel/linux-2.6.16-rc1-mm4]$
> >
>
> ah. .config, please?
Right. See below. I'm testing this out now, but I think it might be due
having included kgdb support.
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.16-rc1-mm4
# Tue Jan 31 23:24:24 2006
#
CONFIG_X86_64=y
CONFIG_64BIT=y
CONFIG_X86=y
CONFIG_SEMAPHORE_SLEEPERS=y
CONFIG_MMU=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_X86_CMPXCHG=y
CONFIG_EARLY_PRINTK=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_DMI=y
#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
#
CONFIG_LOCALVERSION="krw-1"
CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_UID16=y
CONFIG_VM86=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
# CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SHMEM=y
CONFIG_CC_ALIGN_FUNCTIONS=0
CONFIG_CC_ALIGN_LABELS=0
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
CONFIG_SLAB=y
CONFIG_SERIAL_PCI=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_SLOB is not set
#
# Loadable module support
#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_OBSOLETE_MODPARM=y
CONFIG_MODVERSIONS=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y
#
# Block layer
#
# CONFIG_LBD is not set
# CONFIG_LSF is not set
CONFIG_BLK_DEV_IO_TRACE=y
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
# CONFIG_IOSCHED_AS is not set
CONFIG_IOSCHED_DEADLINE=y
# CONFIG_IOSCHED_CFQ is not set
# CONFIG_DEFAULT_AS is not set
CONFIG_DEFAULT_DEADLINE=y
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="deadline"
#
# Processor type and features
#
CONFIG_X86_PC=y
# CONFIG_X86_VSMP is not set
CONFIG_MK8=y
# CONFIG_MPSC is not set
# CONFIG_GENERIC_CPU is not set
CONFIG_X86_L1_CACHE_BYTES=64
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_X86_TSC=y
CONFIG_X86_GOOD_APIC=y
# CONFIG_MICROCODE is not set
CONFIG_X86_MSR=m
CONFIG_X86_CPUID=m
CONFIG_X86_IO_APIC=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_MTRR=y
# CONFIG_SMP is not set
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
CONFIG_PREEMPT_BKL=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_HPET_TIMER=y
CONFIG_X86_PM_TIMER=y
# CONFIG_GART_IOMMU is not set
CONFIG_X86_MCE=y
# CONFIG_X86_MCE_INTEL is not set
CONFIG_X86_MCE_AMD=y
# CONFIG_KEXEC is not set
CONFIG_CRASH_DUMP=y
CONFIG_PHYSICAL_START=0x1000000
# CONFIG_SECCOMP is not set
# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not set
CONFIG_HZ_1000=y
CONFIG_HZ=1000
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_ISA_DMA_API=y
#
# Power management options
#
CONFIG_PM=y
# CONFIG_PM_LEGACY is not set
# CONFIG_PM_DEBUG is not set
# CONFIG_SOFTWARE_SUSPEND is not set
#
# ACPI (Advanced Configuration and Power Interface) Support
#
CONFIG_ACPI=y
CONFIG_ACPI_SLEEP=y
CONFIG_ACPI_SLEEP_PROC_FS=y
# CONFIG_ACPI_SLEEP_PROC_SLEEP is not set
CONFIG_ACPI_AC=m
CONFIG_ACPI_BATTERY=m
CONFIG_ACPI_BUTTON=m
CONFIG_ACPI_VIDEO=m
# CONFIG_ACPI_HOTKEY is not set
CONFIG_ACPI_FAN=m
CONFIG_ACPI_PROCESSOR=m
CONFIG_ACPI_THERMAL=m
# CONFIG_ACPI_ASUS is not set
# CONFIG_ACPI_IBM is not set
# CONFIG_ACPI_TOSHIBA is not set
# CONFIG_ACPI_SONY is not set
# CONFIG_ACPI_CUSTOM_DSDT is not set
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_SYSTEM=y
# CONFIG_ACPI_CONTAINER is not set
#
# CPU Frequency scaling
#
# CONFIG_CPU_FREQ is not set
#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
CONFIG_PCI_DIRECT=y
# CONFIG_PCI_MMCONFIG is not set
CONFIG_UNORDERED_IO=y
CONFIG_PCIEPORTBUS=y
# CONFIG_PCI_MSI is not set
# CONFIG_PCI_LEGACY_PROC is not set
# CONFIG_PCI_DEBUG is not set
#
# PCCARD (PCMCIA/CardBus) support
#
# CONFIG_PCCARD is not set
#
# PCI Hotplug Support
#
# CONFIG_HOTPLUG_PCI is not set
#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_MISC=m
CONFIG_IA32_EMULATION=y
# CONFIG_IA32_AOUT is not set
CONFIG_COMPAT=y
CONFIG_SYSVIPC_COMPAT=y
#
# Networking
#
CONFIG_NET=y
#
# Networking options
#
CONFIG_PACKET=m
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=m
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_FIB_HASH=y
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_IP_MROUTE is not set
# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_TUNNEL is not set
# CONFIG_INET_DIAG is not set
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_BIC=y
# CONFIG_IPV6 is not set
# CONFIG_NETFILTER is not set
#
# DCCP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_DCCP is not set
#
# SCTP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_SCTP is not set
#
# TIPC Configuration (EXPERIMENTAL)
#
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_IEEE80211 is not set
#
# Device Drivers
#
#
# Generic Driver Options
#
# CONFIG_STANDALONE is not set
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
CONFIG_FW_LOADER=m
# CONFIG_DEBUG_DRIVER is not set
#
# Connector - unified userspace <-> kernelspace linker
#
# CONFIG_CONNECTOR is not set
#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set
#
# Parallel port support
#
# CONFIG_PARPORT is not set
#
# Plug and Play support
#
# CONFIG_PNP is not set
#
# Block devices
#
# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=m
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=m
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
CONFIG_CDROM_PKTCDVD=m
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
# CONFIG_ATA_OVER_ETH is not set
#
# ATA/ATAPI/MFM/RLL support
#
CONFIG_IDE=y
CONFIG_BLK_DEV_IDE=y
#
# Please see Documentation/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_IDE_SATA is not set
# CONFIG_BLK_DEV_HD_IDE is not set
CONFIG_BLK_DEV_IDEDISK=y
CONFIG_IDEDISK_MULTI_MODE=y
CONFIG_BLK_DEV_IDECD=m
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEFLOPPY is not set
# CONFIG_BLK_DEV_IDESCSI is not set
# CONFIG_IDE_TASK_IOCTL is not set
#
# IDE chipset support/bugfixes
#
# CONFIG_IDE_GENERIC is not set
# CONFIG_BLK_DEV_CMD640 is not set
CONFIG_BLK_DEV_IDEPCI=y
# CONFIG_IDEPCI_SHARE_IRQ is not set
# CONFIG_BLK_DEV_OFFBOARD is not set
CONFIG_BLK_DEV_GENERIC=y
# CONFIG_BLK_DEV_OPTI621 is not set
# CONFIG_BLK_DEV_RZ1000 is not set
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
CONFIG_IDEDMA_PCI_AUTO=y
# CONFIG_IDEDMA_ONLYDISK is not set
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
CONFIG_BLK_DEV_ATIIXP=y
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_TRIFLEX is not set
# CONFIG_BLK_DEV_CY82C693 is not set
# CONFIG_BLK_DEV_CS5520 is not set
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_HPT34X is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_SC1200 is not set
# CONFIG_BLK_DEV_PIIX is not set
# CONFIG_BLK_DEV_IT821X is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
# CONFIG_BLK_DEV_SVWKS is not set
# CONFIG_BLK_DEV_SIIMAGE is not set
# CONFIG_BLK_DEV_SIS5513 is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
# CONFIG_IDE_ARM is not set
CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_IVB is not set
CONFIG_IDEDMA_AUTO=y
# CONFIG_BLK_DEV_HD is not set
#
# SCSI device support
#
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
# CONFIG_SCSI_PROC_FS is not set
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=m
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=m
# CONFIG_BLK_DEV_SR_VENDOR is not set
CONFIG_CHR_DEV_SG=m
# CONFIG_CHR_DEV_SCH is not set
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
#
# SCSI Transports
#
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_ATTRS is not set
# CONFIG_SAS_CLASS is not set
#
# SCSI low-level drivers
#
# CONFIG_ISCSI_TCP is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
CONFIG_SCSI_SATA=y
# CONFIG_SCSI_SATA_AHCI is not set
# CONFIG_SCSI_PATA_AMD is not set
# CONFIG_SCSI_SATA_SVW is not set
# CONFIG_SCSI_PATA_TRIFLEX is not set
# CONFIG_SCSI_PATA_MPIIX is not set
# CONFIG_SCSI_PATA_OLDPIIX is not set
# CONFIG_SCSI_ATA_PIIX is not set
# CONFIG_SCSI_SATA_MV is not set
# CONFIG_SCSI_SATA_NV is not set
# CONFIG_SCSI_PATA_OPTI is not set
# CONFIG_SCSI_PDC_ADMA is not set
# CONFIG_SCSI_SATA_QSTOR is not set
# CONFIG_SCSI_PATA_PDC2027X is not set
# CONFIG_SCSI_SATA_PROMISE is not set
# CONFIG_SCSI_SATA_SX4 is not set
CONFIG_SCSI_SATA_SIL=y
# CONFIG_SCSI_SATA_SIL24 is not set
# CONFIG_SCSI_PATA_SIL680 is not set
# CONFIG_SCSI_SATA_SIS is not set
# CONFIG_SCSI_SATA_ULI is not set
# CONFIG_SCSI_PATA_VIA is not set
# CONFIG_SCSI_SATA_VIA is not set
# CONFIG_SCSI_SATA_VITESSE is not set
CONFIG_SCSI_SATA_ACPI=y
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_QLOGIC_FC is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_QLA_FC is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_DEBUG is not set
#
# Multi-device support (RAID and LVM)
#
# CONFIG_MD is not set
#
# Fusion MPT device support
#
# CONFIG_FUSION is not set
# CONFIG_FUSION_SPI is not set
# CONFIG_FUSION_FC is not set
# CONFIG_FUSION_SAS is not set
#
# IEEE 1394 (FireWire) support
#
# CONFIG_IEEE1394 is not set
#
# I2O device support
#
# CONFIG_I2O is not set
#
# Network device support
#
CONFIG_NETDEVICES=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
CONFIG_TUN=m
#
# ARCnet devices
#
# CONFIG_ARCNET is not set
#
# PHY device support
#
# CONFIG_PHYLIB is not set
#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
CONFIG_MII=m
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
#
# Tulip family network device support
#
CONFIG_NET_TULIP=y
# CONFIG_DE2104X is not set
CONFIG_TULIP=m
CONFIG_TULIP_MWI=y
CONFIG_TULIP_MMIO=y
# CONFIG_TULIP_NAPI is not set
# CONFIG_DE4X5 is not set
# CONFIG_WINBOND_840 is not set
# CONFIG_DM9102 is not set
# CONFIG_ULI526X is not set
# CONFIG_HP100 is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
# CONFIG_DGRS is not set
# CONFIG_EEPRO100 is not set
# CONFIG_E100 is not set
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
# CONFIG_NE2K_PCI is not set
# CONFIG_8139CP is not set
CONFIG_8139TOO=m
# CONFIG_8139TOO_PIO is not set
# CONFIG_8139TOO_TUNE_TWISTER is not set
# CONFIG_8139TOO_8129 is not set
# CONFIG_8139_OLD_RX_RESET is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_VIA_RHINE is not set
#
# Ethernet (1000 Mbit)
#
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
#
# Ethernet (10000 Mbit)
#
# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
#
# Token Ring devices
#
# CONFIG_TR is not set
#
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set
#
# Wan interfaces
#
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
CONFIG_KGDBOE=y
CONFIG_NETPOLL=y
CONFIG_NETPOLL_RX=y
CONFIG_NETPOLL_TRAP=y
CONFIG_NET_POLL_CONTROLLER=y
#
# ISDN subsystem
#
# CONFIG_ISDN is not set
#
# Telephony Support
#
# CONFIG_PHONE is not set
#
# Input device support
#
CONFIG_INPUT=y
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_TSDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
CONFIG_INPUT_MISC=y
CONFIG_INPUT_PCSPKR=m
# CONFIG_INPUT_UINPUT is not set
#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=m
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
CONFIG_SERIO_RAW=m
# CONFIG_GAMEPORT is not set
#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
# Serial drivers
#
CONFIG_SERIAL_8250=m
# CONFIG_SERIAL_8250_ACPI is not set
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set
#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=m
# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
#
# IPMI
#
# CONFIG_IPMI_HANDLER is not set
#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_NVRAM is not set
CONFIG_RTC=m
# CONFIG_GEN_RTC is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
#
# Ftape, the floppy tape device driver
#
# CONFIG_FTAPE is not set
# CONFIG_AGP is not set
CONFIG_DRM=m
# CONFIG_DRM_TDFX is not set
# CONFIG_DRM_R128 is not set
# CONFIG_DRM_RADEON is not set
# CONFIG_DRM_MGA is not set
# CONFIG_DRM_VIA is not set
# CONFIG_DRM_SAVAGE is not set
# CONFIG_MWAVE is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_HPET is not set
# CONFIG_HANGCHECK_TIMER is not set
#
# TPM devices
#
# CONFIG_TCG_TPM is not set
# CONFIG_TELCLOCK is not set
#
# I2C support
#
CONFIG_I2C=m
# CONFIG_I2C_CHARDEV is not set
#
# I2C Algorithms
#
CONFIG_I2C_ALGOBIT=m
# CONFIG_I2C_ALGOPCF is not set
# CONFIG_I2C_ALGOPCA is not set
#
# I2C Hardware Bus support
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_I801 is not set
# CONFIG_I2C_I810 is not set
# CONFIG_I2C_PIIX4 is not set
CONFIG_I2C_ISA=m
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_PROSAVAGE is not set
# CONFIG_I2C_SAVAGE4 is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_STUB is not set
# CONFIG_I2C_VIA is not set
CONFIG_I2C_VIAPRO=m
# CONFIG_I2C_VOODOO3 is not set
# CONFIG_I2C_PCA_ISA is not set
#
# Miscellaneous I2C Chip support
#
# CONFIG_SENSORS_DS1337 is not set
# CONFIG_SENSORS_DS1374 is not set
# CONFIG_SENSORS_EEPROM is not set
# CONFIG_SENSORS_PCF8574 is not set
CONFIG_SENSORS_PCA9539=m
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_RTC8564 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_RTC_X1205_I2C is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
#
# SPI support
#
# CONFIG_SPI is not set
# CONFIG_SPI_MASTER is not set
#
# Dallas's 1-wire bus
#
# CONFIG_W1 is not set
#
# Hardware Monitoring support
#
CONFIG_HWMON=m
# CONFIG_HWMON_VID is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
# CONFIG_SENSORS_ASB100 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_FSCHER is not set
# CONFIG_SENSORS_FSCPOS is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM63 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_LM80 is not set
# CONFIG_SENSORS_LM83 is not set
# CONFIG_SENSORS_LM85 is not set
# CONFIG_SENSORS_LM87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_SIS5595 is not set
CONFIG_SENSORS_SMSC47M1=m
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_SENSORS_HDAPS is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
#
# Misc devices
#
# CONFIG_IBM_ASM is not set
#
# Multimedia Capabilities Port drivers
#
#
# Multimedia devices
#
CONFIG_VIDEO_DEV=m
#
# Video For Linux
#
#
# Video Adapters
#
# CONFIG_VIDEO_ADV_DEBUG is not set
CONFIG_VIDEO_BT848=m
# CONFIG_VIDEO_SAA6588 is not set
# CONFIG_VIDEO_CPIA is not set
# CONFIG_VIDEO_SAA5246A is not set
# CONFIG_VIDEO_SAA5249 is not set
# CONFIG_TUNER_3036 is not set
# CONFIG_VIDEO_STRADIS is not set
# CONFIG_VIDEO_ZORAN is not set
# CONFIG_VIDEO_SAA7134 is not set
# CONFIG_VIDEO_MXB is not set
# CONFIG_VIDEO_DPC is not set
# CONFIG_VIDEO_HEXIUM_ORION is not set
# CONFIG_VIDEO_HEXIUM_GEMINI is not set
# CONFIG_VIDEO_CX88 is not set
# CONFIG_VIDEO_EM28XX is not set
# CONFIG_VIDEO_OVCAMCHIP is not set
# CONFIG_VIDEO_AUDIO_DECODER is not set
# CONFIG_VIDEO_DECODER is not set
#
# Radio Adapters
#
# CONFIG_RADIO_GEMTEK_PCI is not set
# CONFIG_RADIO_MAXIRADIO is not set
# CONFIG_RADIO_MAESTRO is not set
#
# Digital Video Broadcasting Devices
#
# CONFIG_DVB is not set
CONFIG_VIDEO_TUNER=m
CONFIG_VIDEO_BUF=m
CONFIG_VIDEO_BTCX=m
CONFIG_VIDEO_IR=m
CONFIG_VIDEO_TVEEPROM=m
#
# Graphics support
#
CONFIG_FB=y
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_MACMODES is not set
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ARC is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
CONFIG_FB_VGA16=y
CONFIG_FB_VESA=y
CONFIG_VIDEO_SELECT=y
# CONFIG_FB_HGA is not set
# CONFIG_FB_S1D13XXX is not set
CONFIG_FB_NVIDIA=m
CONFIG_FB_NVIDIA_I2C=y
# CONFIG_FB_RIVA is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON_OLD is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_GEODE is not set
# CONFIG_FB_VIRTUAL is not set
#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
CONFIG_VGACON_SOFT_SCROLLBACK=y
CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=1024
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
#
# Logo configuration
#
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
CONFIG_LOGO_LINUX_CLUT224=y
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Sound
#
CONFIG_SOUND=m
#
# Advanced Linux Sound Architecture
#
CONFIG_SND=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
CONFIG_SND_SEQUENCER=m
CONFIG_SND_SEQ_DUMMY=m
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
CONFIG_SND_PCM_OSS_PLUGINS=y
CONFIG_SND_SEQUENCER_OSS=y
CONFIG_SND_RTCTIMER=m
CONFIG_SND_SEQ_RTCTIMER_DEFAULT=y
# CONFIG_SND_DYNAMIC_MINORS is not set
CONFIG_SND_SUPPORT_OLD_API=y
CONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
#
# Generic devices
#
CONFIG_SND_AC97_CODEC=m
CONFIG_SND_AC97_BUS=m
CONFIG_SND_DUMMY=m
# CONFIG_SND_VIRMIDI is not set
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set
#
# PCI devices
#
# CONFIG_SND_AD1889 is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_ALI5451 is not set
CONFIG_SND_ATIIXP=m
# CONFIG_SND_ATIIXP_MODEM is not set
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AZT3328 is not set
CONFIG_SND_BT87X=m
CONFIG_SND_BT87X_OVERCLOCK=y
# CONFIG_SND_CA0106 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_EMU10K1X is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_FM801 is not set
# CONFIG_SND_HDA_INTEL is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_HDSPM is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
# CONFIG_SND_INTEL8X0 is not set
# CONFIG_SND_INTEL8X0M is not set
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_PCXHR is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VX222 is not set
# CONFIG_SND_YMFPCI is not set
#
# USB devices
#
# CONFIG_SND_USB_AUDIO is not set
# CONFIG_SND_USB_USX2Y is not set
#
# Open Sound System
#
# CONFIG_SOUND_PRIME is not set
#
# USB support
#
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_BANDWIDTH is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_SUSPEND is not set
# CONFIG_USB_OTG is not set
#
# USB Host Controller Drivers
#
CONFIG_USB_EHCI_HCD=m
# CONFIG_USB_EHCI_SPLIT_ISO is not set
CONFIG_USB_EHCI_ROOT_HUB_TT=y
# CONFIG_USB_ISP116X_HCD is not set
CONFIG_USB_OHCI_HCD=m
# CONFIG_USB_OHCI_BIG_ENDIAN is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_UHCI_HCD=m
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_IP is not set
#
# USB Device Class drivers
#
# CONFIG_OBSOLETE_OSS_USB_DRIVER is not set
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
#
# may also be needed; see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_DPCM is not set
CONFIG_USB_STORAGE_USBAT=y
CONFIG_USB_STORAGE_SDDR09=y
CONFIG_USB_STORAGE_SDDR55=y
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_STORAGE_ALAUDA is not set
# CONFIG_USB_LIBUSUAL is not set
#
# USB Input Devices
#
CONFIG_USB_HID=m
CONFIG_USB_HIDINPUT=y
# CONFIG_USB_HIDINPUT_POWERBOOK is not set
# CONFIG_HID_FF is not set
# CONFIG_USB_HIDDEV is not set
#
# USB HID Boot Protocol drivers
#
# CONFIG_USB_KBD is not set
# CONFIG_USB_MOUSE is not set
# CONFIG_USB_AIPTEK is not set
# CONFIG_USB_WACOM is not set
# CONFIG_USB_ACECAD is not set
# CONFIG_USB_KBTAB is not set
# CONFIG_USB_POWERMATE is not set
# CONFIG_USB_MTOUCH is not set
# CONFIG_USB_ITMTOUCH is not set
# CONFIG_USB_EGALAX is not set
# CONFIG_USB_YEALINK is not set
# CONFIG_USB_XPAD is not set
# CONFIG_USB_ATI_REMOTE is not set
# CONFIG_USB_ATI_REMOTE2 is not set
# CONFIG_USB_KEYSPAN_REMOTE is not set
# CONFIG_USB_APPLETOUCH is not set
#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
#
# USB Multimedia devices
#
# CONFIG_USB_DABUSB is not set
# CONFIG_USB_VICAM is not set
# CONFIG_USB_DSBR is not set
# CONFIG_USB_ET61X251 is not set
# CONFIG_USB_IBMCAM is not set
# CONFIG_USB_KONICAWC is not set
# CONFIG_USB_OV511 is not set
# CONFIG_USB_SE401 is not set
# CONFIG_USB_SN9C102 is not set
# CONFIG_USB_STV680 is not set
# CONFIG_USB_PWC is not set
#
# USB Network Adapters
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set
# CONFIG_USB_MON is not set
#
# USB port drivers
#
#
# USB Serial Converter support
#
CONFIG_USB_SERIAL=m
CONFIG_USB_SERIAL_GENERIC=y
# CONFIG_USB_SERIAL_AIRPRIME is not set
# CONFIG_USB_SERIAL_ANYDATA is not set
# CONFIG_USB_SERIAL_BELKIN is not set
# CONFIG_USB_SERIAL_WHITEHEAT is not set
# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
# CONFIG_USB_SERIAL_CP2101 is not set
# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
# CONFIG_USB_SERIAL_EMPEG is not set
# CONFIG_USB_SERIAL_FTDI_SIO is not set
CONFIG_USB_SERIAL_VISOR=m
# CONFIG_USB_SERIAL_IPAQ is not set
# CONFIG_USB_SERIAL_IR is not set
# CONFIG_USB_SERIAL_EDGEPORT is not set
# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
# CONFIG_USB_SERIAL_GARMIN is not set
# CONFIG_USB_SERIAL_IPW is not set
# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
# CONFIG_USB_SERIAL_KEYSPAN is not set
# CONFIG_USB_SERIAL_KLSI is not set
# CONFIG_USB_SERIAL_KOBIL_SCT is not set
# CONFIG_USB_SERIAL_MCT_U232 is not set
# CONFIG_USB_SERIAL_PL2303 is not set
# CONFIG_USB_SERIAL_HP4X is not set
# CONFIG_USB_SERIAL_SAFE is not set
# CONFIG_USB_SERIAL_TI is not set
# CONFIG_USB_SERIAL_CYBERJACK is not set
# CONFIG_USB_SERIAL_XIRCOM is not set
# CONFIG_USB_SERIAL_OMNINET is not set
#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_GOTEMP is not set
# CONFIG_USB_PHIDGETKIT is not set
# CONFIG_USB_PHIDGETSERVO is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TEST is not set
#
# USB DSL modem support
#
#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
#
# MMC/SD Card support
#
CONFIG_MMC=m
# CONFIG_MMC_DEBUG is not set
CONFIG_MMC_BLOCK=m
# CONFIG_MMC_BULKTRANSFER is not set
# CONFIG_MMC_WBSD is not set
#
# InfiniBand support
#
# CONFIG_INFINIBAND is not set
#
# SN Devices
#
#
# EDAC - error detection and reporting (RAS)
#
# CONFIG_EDAC is not set
#
# Distributed Lock Manager
#
# CONFIG_DLM is not set
#
# Firmware Drivers
#
# CONFIG_EDD is not set
# CONFIG_DELL_RBU is not set
# CONFIG_DCDBAS is not set
#
# File systems
#
# CONFIG_EXT2_FS is not set
CONFIG_EXT3_FS=m
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
CONFIG_JBD=m
# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=m
# CONFIG_REISER4_FS is not set
CONFIG_REISERFS_FS=y
# CONFIG_REISERFS_CHECK is not set
# CONFIG_REISERFS_PROC_INFO is not set
# CONFIG_REISERFS_FS_XATTR is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_XFS_FS=m
CONFIG_XFS_EXPORT=y
# CONFIG_XFS_QUOTA is not set
# CONFIG_XFS_SECURITY is not set
# CONFIG_XFS_POSIX_ACL is not set
# CONFIG_XFS_RT is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_INOTIFY is not set
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_ZISOFS_FS=m
# CONFIG_UDF_FS is not set
#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
# CONFIG_NTFS_FS is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_VMCORE=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
CONFIG_RELAYFS_FS=y
# CONFIG_CONFIGFS_FS is not set
#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_ASFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
#
# Network File Systems
#
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
# CONFIG_NFS_V4 is not set
# CONFIG_NFS_DIRECTIO is not set
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
# CONFIG_NFSD_V3_ACL is not set
# CONFIG_NFSD_V4 is not set
# CONFIG_NFSD_TCP is not set
CONFIG_LOCKD=m
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=m
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
# CONFIG_9P_FS is not set
#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
#
# Native Language Support
#
CONFIG_NLS=m
CONFIG_NLS_DEFAULT="iso8859-15"
CONFIG_NLS_CODEPAGE_437=m
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
CONFIG_NLS_ASCII=m
CONFIG_NLS_ISO8859_1=m
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
CONFIG_NLS_ISO8859_15=m
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set
#
# Instrumentation Support
#
# CONFIG_PROFILING is not set
# CONFIG_KPROBES is not set
#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
CONFIG_MAGIC_SYSRQ=y
# CONFIG_DEBUG_SHIRQ is not set
CONFIG_DEBUG_KERNEL=y
CONFIG_LOG_BUF_SHIFT=18
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_PREEMPT is not set
# CONFIG_DEBUG_MUTEXES is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_INFO=y
# CONFIG_PAGE_OWNER is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_FRAME_POINTER is not set
CONFIG_FORCED_INLINING=y
CONFIG_UNWIND_INFO=y
# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_DEBUG_SYNCHRO_TEST=m
# CONFIG_DEBUG_RODATA is not set
CONFIG_KGDB=y
# CONFIG_KGDB_9600BAUD is not set
# CONFIG_KGDB_19200BAUD is not set
# CONFIG_KGDB_38400BAUD is not set
# CONFIG_KGDB_57600BAUD is not set
CONFIG_KGDB_115200BAUD=y
CONFIG_KGDB_PORT=0x3f8
CONFIG_KGDB_IRQ=4
# CONFIG_KGDB_MORE is not set
# CONFIG_KGDB_TS is not set
# CONFIG_STACK_OVERFLOW_TEST is not set
# CONFIG_KGDB_CONSOLE is not set
CONFIG_KGDB_SYSRQ=y
#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
#
# Cryptographic options
#
# CONFIG_CRYPTO is not set
#
# Hardware crypto devices
#
#
# Library routines
#
CONFIG_CRC_CCITT=m
CONFIG_CRC16=m
CONFIG_CRC32=y
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=m
> > The Arkansas legislature passed a law that states that the Arkansas
> > River can rise no higher than to the Main Street bridge in Little
> > Rock.
>
> Easy: a pontoon bridge.
> -
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to [email protected]
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
>
--
"It's Fabulous! We haven't seen anything like it in the last half an
hour!"
-- Macy's
On Tue, Jan 31, 2006 at 11:57:13PM -0500, Kurt Wall took 1598 lines to write:
> On Tue, Jan 31, 2006 at 08:40:45PM -0800, Andrew Morton took 41 lines to write:
> > Kurt Wall <[email protected]> wrote:
> > >
> > > On Sun, Jan 29, 2006 at 02:45:33PM -0800, Andrew Morton took 397 lines to write:
> > > >
> > > > ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.16-rc1/2.6.16-rc1-mm4/
> > >
> > > depmod loop:
> > >
> > > $ sudo make modules_install:
> > > ...
> > > INSTALL sound/soundcore.ko
> > > if [ -r System.map -a -x /sbin/depmod ]; then /sbin/depmod -ae -F
> > > System.map 2.6.16-rc1-mm4krw-1; fi
> > > WARNING: Loop detected:
> > > /lib/modules/2.6.16-rc1-mm4krw-1/kernel/drivers/serial/8250.ko needs
> > > serial_core.ko which needs 8250.ko again!
> > > WARNING: Module
> > > /lib/modules/2.6.16-rc1-mm4krw-1/kernel/drivers/serial/8250.ko
> > > ignored, due to loop
> > > WARNING: Module
> > > /lib/modules/2.6.16-rc1-mm4krw-1/kernel/drivers/serial/serial_core.ko
> > > ignored, due to loop
> > > WARNING: Module
> > > /lib/modules/2.6.16-rc1-mm4krw-1/kernel/drivers/serial/8250_pci.ko
> > > ignored, due to loop
> > > [~/kernel/linux-2.6.16-rc1-mm4]$
> > >
> >
> > ah. .config, please?
>
> Right. See below. I'm testing this out now, but I think it might be due
> having included kgdb support.
Disabling kgdb support makes the depmood loop go away.
Kurt
--
Magnocartic, adj.:
Any automobile that, when left unattended, attracts shopping
carts.
-- Sniglets, "Rich Hall & Friends"
On Tue, Jan 31, 2006 at 08:40:45PM -0800, Andrew Morton wrote:
> Kurt Wall <[email protected]> wrote:
> > $ sudo make modules_install:
> > ...
> > INSTALL sound/soundcore.ko
> > if [ -r System.map -a -x /sbin/depmod ]; then /sbin/depmod -ae -F
> > System.map 2.6.16-rc1-mm4krw-1; fi
> > WARNING: Loop detected:
> > /lib/modules/2.6.16-rc1-mm4krw-1/kernel/drivers/serial/8250.ko needs
> > serial_core.ko which needs 8250.ko again!
> > WARNING: Module
> > /lib/modules/2.6.16-rc1-mm4krw-1/kernel/drivers/serial/8250.ko
> > ignored, due to loop
> > WARNING: Module
> > /lib/modules/2.6.16-rc1-mm4krw-1/kernel/drivers/serial/serial_core.ko
> > ignored, due to loop
> > WARNING: Module
> > /lib/modules/2.6.16-rc1-mm4krw-1/kernel/drivers/serial/8250_pci.ko
> > ignored, due to loop
> > [~/kernel/linux-2.6.16-rc1-mm4]$
> >
>
> ah. .config, please?
It'll be the well-known kgdb problem in your tree. You might want to
make a note of this for future reference.
It's been a while since this came up, but I thought someone was working
on a kgdb version which didn't have this yucky side effect. It's now
far too long ago for me to remember who it was.
What happened to getting that into -mm instead of this obviously buggy
version?
--
Russell King
Linux kernel 2.6 ARM Linux - http://www.arm.linux.org.uk/
maintainer of: 2.6 Serial core
Russell King <[email protected]> wrote:
>
> On Tue, Jan 31, 2006 at 08:40:45PM -0800, Andrew Morton wrote:
> > Kurt Wall <[email protected]> wrote:
> > > $ sudo make modules_install:
> > > ...
> > > INSTALL sound/soundcore.ko
> > > if [ -r System.map -a -x /sbin/depmod ]; then /sbin/depmod -ae -F
> > > System.map 2.6.16-rc1-mm4krw-1; fi
> > > WARNING: Loop detected:
> > > /lib/modules/2.6.16-rc1-mm4krw-1/kernel/drivers/serial/8250.ko needs
> > > serial_core.ko which needs 8250.ko again!
> > > WARNING: Module
> > > /lib/modules/2.6.16-rc1-mm4krw-1/kernel/drivers/serial/8250.ko
> > > ignored, due to loop
> > > WARNING: Module
> > > /lib/modules/2.6.16-rc1-mm4krw-1/kernel/drivers/serial/serial_core.ko
> > > ignored, due to loop
> > > WARNING: Module
> > > /lib/modules/2.6.16-rc1-mm4krw-1/kernel/drivers/serial/8250_pci.ko
> > > ignored, due to loop
> > > [~/kernel/linux-2.6.16-rc1-mm4]$
> > >
> >
> > ah. .config, please?
>
> It'll be the well-known kgdb problem in your tree. You might want to
> make a note of this for future reference.
That kgdb stub is slowly deteriorating as everyone hacks on everything
else. I usually disable 8250 completely in config when I want to use it
nowadays.
> It's been a while since this came up, but I thought someone was working
> on a kgdb version which didn't have this yucky side effect. It's now
> far too long ago for me to remember who it was.
>
> What happened to getting that into -mm instead of this obviously buggy
> version?
Tom pops up with it every few months, I try to merge it, general havoc
ensues and it all goes quiet again.
Andrew Morton wrote:
> Al Boldi <[email protected]> wrote:
> > Andrew Morton wrote:
> > > Al Boldi <[email protected]> wrote:
> > > > Andrew Morton wrote:
> > > > > - Various other random bits and pieces. Things have been pretty
> > > > > quiet lately - most activity seems to be concentrated about
> > > > > putting bugs into the various subsystem trees.
> > > >
> > > > Does it fix the DRM_i810 hang during a suspend-to-ram/disk cycle?
> > >
> > > I don't know - I don't watch every patch which goes into 49 different
> > > trees. Did you try it?
> >
> > It still hangs w/ drm.
> >
> > w/o drm STD works like a charm.
>
> OK.
>
> > w/o drm STR works lest this t/o and a noisy display in X.
>
> What do "lest" and "t/o" mean? Please use less abbreviations.
Sorry! lest=except ; t/o=timeout
>
> > Stopping tasks: ========================|
> > Suspending device 0.1
> > Suspending device 0.0
> > Suspending device ide0
> > Suspending device floppy.0
> > Suspending device serio1
> > Suspending device serio0
> > Suspending device i8042
> > Suspending device 0000:01:0a.0
> > Suspending device 0000:01:05.0
> > Suspending device 0000:00:1f.2
> > Suspending device 0000:00:1f.1
> > Suspending device 0000:00:1f.0
> > Suspending device 0000:00:1e.0
> > Suspending device 0000:00:01.0
> > Suspending device 0000:00:00.0
> > Suspending device pci0000:00
> > Suspending device platform
> > Intel machine check architecture supported.
> > Intel machine check reporting enabled on CPU#0.
> > Back to C!
> > ACPI: PCI Interrupt 0000:00:01.0[A] -> Link [LNKA] -> GSI 11 (level,
> > low) -> IRQ 11
> > PCI: Setting latency timer of device 0000:00:1e.0 to 64
> > eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
> > hda: drive not ready on wakeup
> > hda: status timeout: status=0xd0 { Busy }
> > ide: failed opcode was: unknown
> > hda: DMA disabled
> > hdb: DMA disabled
> > hda: drive not ready for command
> > ide0: reset: success
> > BUG: warning at drivers/ide/ide-iops.c:1235/ide_wait_not_busy()
> > <c02612e2> ide_wait_not_busy+0xa2/0xb0 <c025ee87>
> > start_request+0x1a7/0x230
> > <c025f17a> ide_do_request+0x23a/0x3c0 <c026440a>
> > set_multmode_intr+0x1a/0x70
> > <c025f79b> ide_intr+0xeb/0x130 <c02643f0> set_multmode_intr+0x0/0x70
> > <c0135610> handle_IRQ_event+0x30/0x70 <c01356a5> __do_IRQ+0x55/0xc0
> > <c0105672> do_IRQ+0x42/0x70
> > =======================
> > <c0103976> common_interrupt+0x1a/0x20 <c021886d>
> > acpi_processor_idle+0x2b6/0x332
> > <c0101030> default_idle+0x0/0x70 <c0101118> cpu_idle+0x58/0x70
> > <c03c47bd> start_kernel+0x14d/0x170 <c03c4310>
> > unknown_bootoption+0x0/0x1e0
> > hdb: set_drive_speed_status: status=0x40 { DriveReady }
> > ide: failed opcode was: unknown
> > Restarting tasks... done
>
> The above is an IDE problem. Are you saying that the above only occurs
> when DRM is enabled?
It's dependent on STR only. STD works fine. DRM seems irrelevant to this
problem.
>
> Please take more time and use more words when describing this problem,
> thanks.
Please bare with me, as I am not really verse in English.
>
> > Also, a 100HZ recompile in mainline causes a 400% delay doing a simple
> > lilo, which seems fixed in mm. Is there a reason you can't move that to
> > mainline?
>
> Again, I don't understand what that means. Are you saying that a kernel
> compiled with HZ=100 takes 4 times as long to run lilo?
Yes, in mainline a kernel compiled with HZ=100 takes 4 times as long to run
lilo as it would take for a kernel compiled with HZ=1000. This problem does
not exist in mm.
Also,
hdparm -tT /dev/hda
cat /dev/hda > /dev/null
dd < /dev/hda > /dev/null
get ~30% improved throughput when setting
echo 192 > /sys/block/hda/queue/max_sectors_kb
echo 192 > /sys/block/hda/queue/read_ahead_kb
whereas anything outside 132-255 affects throughput negatively.
Is this a bug?
Thanks!
--
Al
On Sun, 29 Jan 2006 14:45:33 -0800, Andrew Morton <[email protected]> wrote:
>
> ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.16-rc1/2.6.16-rc1-mm4/
>
>
I have problems with ide-floppy.
Do not know if they are specific to this latest release, as I did not use
my ZIP drive since long ago...Now I tried to make a boot zip with grub.
I inserted a mac floppy, partitioned it as hdb1, and as soon as fdisk wrote
the partition table and forced a reread, the system began to scan the
zip like crazy, and nothing appears on /proc/partitions ...
Ejected the disk, rmmod ide-floppy, insert the disk and everything is quiet.
As soon as insmod ide-floppy, the party starts on syslog:
ide-floppy driver 0.99.newide
hdb: 244766kB, 489532 blocks, 512 sector size
hdb: 244736kB, 239/64/32 CHS, 4096 kBps, 512 sector size, 2941 rpm
hdb: The disk reports a capacity of 250640384 bytes, but the drive only handles 250609664
hdb: The disk reports a capacity of 250640384 bytes, but the drive only handles 250609664
hdb: hdb1
<last 3 messages repeated forever>
Funny...
Some truncation error anywhere ?
TIA
--
J.A. Magallon <jamagallon()able!es> \ Software is like sex:
werewolf!able!es \ It's better when it's free
Mandriva Linux release 2006.1 (Cooker) for i586
Linux 2.6.15-jam7 (gcc 4.0.2 (4.0.2-1mdk for Mandriva Linux release 2006.1))
"J.A. Magallon" <[email protected]> wrote:
>
> On Sun, 29 Jan 2006 14:45:33 -0800, Andrew Morton <[email protected]> wrote:
>
> >
> > ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.16-rc1/2.6.16-rc1-mm4/
> >
> >
>
> I have problems with ide-floppy.
> Do not know if they are specific to this latest release, as I did not use
> my ZIP drive since long ago...Now I tried to make a boot zip with grub.
>
> I inserted a mac floppy, partitioned it as hdb1, and as soon as fdisk wrote
> the partition table and forced a reread, the system began to scan the
> zip like crazy, and nothing appears on /proc/partitions ...
>
> Ejected the disk, rmmod ide-floppy, insert the disk and everything is quiet.
> As soon as insmod ide-floppy, the party starts on syslog:
>
> ide-floppy driver 0.99.newide
> hdb: 244766kB, 489532 blocks, 512 sector size
> hdb: 244736kB, 239/64/32 CHS, 4096 kBps, 512 sector size, 2941 rpm
> hdb: The disk reports a capacity of 250640384 bytes, but the drive only handles 250609664
> hdb: The disk reports a capacity of 250640384 bytes, but the drive only handles 250609664
> hdb: hdb1
>
> <last 3 messages repeated forever>
>
>From my reading of the code, the above should have been a once-off warning
and the driver should have proceeded happily. Strange that it repeated
those messages forever.
I guess the next step is to try some earlier kernels.