I've been testing .28 (currently -rc8) and I've noticed in the logs a
massive amount of the following.
I can confirm that the messages doesn't appear when booting into a .27
kernel.
ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
ata2.00: ST_FIRST: !(DRQ|ERR|DF)
ata2.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
cdb 1e 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
res 50/00:01:00:00:00/00:00:00:00:00/a0 Emask 0x2 (HSM violation)
ata2.00: status: { DRDY }
ata2: soft resetting link
ata2.00: configured for UDMA/33
ata2: EH complete
I get this block of messages about every 20 seconds for as long as I'm
booted into a .28 kernel.
It seems that the sata link is being soft reseted about every _20_ secs.
My drive is a sata drive that should be using UDMA/133 (right?),
but the "error" message says configuring for UDMA/33.
Does this mean that my drive is running at a slower speed?
Should I be worried about the .28 kernel corrupting my hardware? Is this
a known issue?
How can I stop it from filling my logs!
Some information about my computer:
$ lspci
00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML
and 945GT Express Memory Controller Hub (rev 03)
00:02.0 VGA compatible controller: Intel Corporation Mobile 945GM/GMS,
943/940GML Express Integrated Graphics Controller (rev 03)
00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/GME,
943/940GML Express Integrated Graphics Controller (rev 03)
00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High
Definition Audio Controller (rev 01)
00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express
Port 1 (rev 01)
00:1c.3 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express
Port 4 (rev 01)
00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI
Controller #1 (rev 01)
00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI
Controller #2 (rev 01)
00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI
Controller #3 (rev 01)
00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI
Controller #4 (rev 01)
00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI
Controller (rev 01)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e1)
00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface
Bridge (rev 01)
00:1f.2 IDE interface: Intel Corporation 82801GBM/GHM (ICH7 Family) SATA
IDE Controller (rev 01)
00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller
(rev 01)
03:00.0 Ethernet controller: Broadcom Corporation BCM4401-B0 100Base-TX
(rev 02)
03:01.0 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller
03:01.1 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro
Host Adapter (rev 19)
03:01.2 System peripheral: Ricoh Co Ltd R5C843 MMC Host Controller (rev 0a)
03:01.3 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host
Adapter (rev 05)
03:01.4 System peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev ff)
0b:00.0 Network controller: Intel Corporation PRO/Wireless 3945ABG
[Golan] Network Connection (rev 02)
$ hdparm -I /dev/sda
/dev/sda:
ATA device, with non-removable media
Model Number: ST980811AS
Serial Number: 5LY6J1M0
Firmware Revision: 3.CDD
Standards:
Supported: 7 6 5 4
Likely used: 8
Configuration:
Logical max current
cylinders 16383 16383
heads 16 16
sectors/track 63 63
--
CHS current addressable sectors: 16514064
LBA user addressable sectors: 156301488
LBA48 user addressable sectors: 156301488
device size with M = 1024*1024: 76319 MBytes
device size with M = 1000*1000: 80026 MBytes (80 GB)
Capabilities:
LBA, IORDY(can be disabled)
Queue depth: 32
Standby timer values: spec'd by Standard, no device specific minimum
R/W multiple sector transfer: Max = 16 Current = 8
Advanced power management level: 128
Recommended acoustic management value: 128, current value: 0
DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 udma5 *udma6
Cycle time: min=120ns recommended=120ns
PIO: pio0 pio1 pio2 pio3 pio4
Cycle time: no flow control=240ns IORDY flow control=120ns
Commands/features:
Enabled Supported:
* SMART feature set
Security Mode feature set
* Power Management feature set
* Write cache
* Look-ahead
* Host Protected Area feature set
* WRITE_BUFFER command
* READ_BUFFER command
* DOWNLOAD_MICROCODE
* Advanced Power Management feature set
SET_MAX security extension
Automatic Acoustic Management feature set
* 48-bit Address feature set
* Mandatory FLUSH_CACHE
* FLUSH_CACHE_EXT
* SMART error logging
* SMART self-test
* IDLE_IMMEDIATE with UNLOAD
* SATA-I signaling speed (1.5Gb/s)
* Native Command Queueing (NCQ)
* Phy event counters
Device-initiated interface power management
* Software settings preservation
* SMART Command Transport (SCT) feature set
Security:
Master password revision code = 65534
supported
not enabled
not locked
frozen
not expired: security count
not supported: enhanced erase
Checksum: correct
$ hdparm -fF /dev/sda; hdparm -tT /dev/sda
/dev/sda:
Timing cached reads: 1650 MB in 2.00 seconds = 825.06 MB/sec
Timing buffered disk reads: 130 MB in 3.04 seconds = 42.79 MB/sec
$ smartctl -a /dev/sda
smartctl version 5.38 [i686-pc-linux-gnu] Copyright (C) 2002-8 Bruce Allen
Home page is http://smartmontools.sourceforge.net/
=== START OF INFORMATION SECTION ===
Model Family: Seagate Momentus 5400.3
Device Model: ST980811AS
Serial Number: 5LY6J1M0
Firmware Version: 3.CDD
User Capacity: 80,026,361,856 bytes
Device is: In smartctl database [for details use: -P show]
ATA Version is: 7
ATA Standard is: Exact ATA specification draft version not indicated
Local Time is: Fri Dec 12 17:05:06 2008 PST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
See vendor-specific Attribute list for marginal Attributes.
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection:
Enabled.
Self-test execution status: ( 0) The previous self-test routine
completed
without error or no self-test
has ever
been run.
Total time to complete Offline
data collection: ( 426) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection
on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
No General Purpose Logging support.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 84) minutes.
SCT capabilities: (0x0001) SCT Status supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE
UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 100 253 006 Pre-fail
Always - 0
3 Spin_Up_Time 0x0003 099 099 085 Pre-fail
Always - 0
4 Start_Stop_Count 0x0032 099 099 020 Old_age
Always - 1142
5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail
Always - 0
7 Seek_Error_Rate 0x000f 079 060 030 Pre-fail
Always - 88807308
9 Power_On_Hours 0x0032 097 097 000 Old_age
Always - 3420
10 Spin_Retry_Count 0x0013 100 100 034 Pre-fail
Always - 0
12 Power_Cycle_Count 0x0032 099 099 020 Old_age
Always - 1180
187 Reported_Uncorrect 0x0032 100 100 000 Old_age
Always - 0
189 High_Fly_Writes 0x003a 100 100 000 Old_age
Always - 0
190 Airflow_Temperature_Cel 0x0022 050 042 045 Old_age
Always In_the_past 50 (0 102 52 25)
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age
Always - 1076
193 Load_Cycle_Count 0x0032 001 001 000 Old_age
Always - 241664
194 Temperature_Celsius 0x0022 050 058 000 Old_age
Always - 50 (0 19 0 0)
195 Hardware_ECC_Recovered 0x001a 061 060 000 Old_age
Always - 195105625
197 Current_Pending_Sector 0x0012 100 100 000 Old_age
Always - 0
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age
Offline - 0
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age
Always - 0
200 Multi_Zone_Error_Rate 0x0000 100 253 000 Old_age
Offline - 0
202 TA_Increase_Count 0x0032 100 253 000 Old_age
Always - 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining
LifeTime(hours) LBA_of_first_error
# 1 Extended offline Completed without error 00%
3257 -
# 2 Short offline Completed without error 00%
3256 -
# 3 Short offline Completed without error 00%
2659 -
# 4 Short offline Completed without error 00%
2659 -
# 5 Short offline Completed without error 00%
1657 -
# 6 Short offline Completed without error 00%
1621 -
# 7 Short offline Completed without error 00%
2 -
# 8 Short offline Completed without error 00%
2 -
# 9 Short offline Completed without error 00%
1 -
#10 Short offline Completed without error 00%
0 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
Justin Madru
Alan Cox wrote:
> On Tue, 16 Dec 2008 21:02:51 -0800
> Andrew Morton <[email protected]> wrote:
>
>
>> (cc linux-ide).
>>
>> This is a post-2.6.27 regression. Panic!
>>
>> On Fri, 12 Dec 2008 18:07:49 -0800 Justin Madru <[email protected]> wrote:
>>
>>
>>> I've been testing .28 (currently -rc8) and I've noticed in the logs a
>>> massive amount of the following.
>>> I can confirm that the messages doesn't appear when booting into a .27
>>> kernel.
>>>
>>> ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
>>> ata2.00: ST_FIRST: !(DRQ|ERR|DF)
>>>
>
> Which is the first 2.6.28-rc that this appears ?
>
>
I did some basic testing to find out what -rc it first appears in, and
it _could_ be before -rc3.
I first noticed it after -rc6 because of another issue that made me look
into the logs.
So, currently I don't know exactly when it started (haven't bisected).
The problem is that the sata-reset messages don't appear immediately
after boot.
They happen about say 10 after boot, then appear sporadically, but
sometimes very frequently.
I've tried to trigger the error, but have been unable to determine any
relation.
Henceforth, a bisect would be hard.
To reply to Jeff:
Yes, the ata_piix module is loaded.
I do have a DVD/CD drive that should be on the same controller as the
hard drive (TSSTcorpCD-RW/DVD-ROM TSL462D)
(is there a command to run to show drives connected to a controller?)
below is the dmesg, and more info about my computer (ie. config / hardware)
can be found at: http://jdserver.homelinux.org/bugreports/
BIOS EBDA/lowmem at: 0009f000/0009f000
Linux version 2.6.28-rc8-git (root@dell-laptop) (gcc version 4.3.2
(Ubuntu 4.3.2-1ubuntu11) ) #1 SMP PREEMPT Wed Dec 10 21:59:30 PST 2008
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
NSC Geode by NSC
Cyrix CyrixInstead
Centaur CentaurHauls
Transmeta GenuineTMx86
Transmeta TransmetaCPU
UMC UMC UMC UMC
PAT WC disabled due to known CPU erratum.
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
BIOS-e820: 0000000000100000 - 000000003f6d3400 (usable)
BIOS-e820: 000000003f6d3400 - 0000000040000000 (reserved)
BIOS-e820: 00000000f0000000 - 00000000f4007000 (reserved)
BIOS-e820: 00000000f4008000 - 00000000f400c000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
BIOS-e820: 00000000fed20000 - 00000000feda0000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved)
BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
DMI 2.4 present.
last_pfn = 0x3f6d3 max_arch_pfn = 0x100000
kernel direct mapping tables up to 377fe000 @ 7000-d000
RAMDISK: 37bbc000 - 37fefac2
Allocated new RAMDISK: 0055e000 - 00991ac2
Move RAMDISK from 0000000037bbc000 - 0000000037fefac1 to 0055e000 - 00991ac1
ACPI: RSDP 000FC1D0, 0014 (r0 DELL )
ACPI: RSDT 3F6D39CD, 0040 (r1 DELL M07 27D7060D ASL 61)
ACPI: FACP 3F6D4800, 0074 (r1 DELL M07 27D7060D ASL 61)
ACPI: DSDT 3F6D5400, 4766 (r1 INT430 SYSFexxx 1001 INTL 20050624)
ACPI: FACS 3F6E3C00, 0040
ACPI: HPET 3F6D4F00, 0038 (r1 DELL M07 1 ASL 61)
ACPI: APIC 3F6D5000, 0068 (r1 DELL M07 27D7060D ASL 47)
ACPI: MCFG 3F6D4FC0, 003E (r16 DELL M07 27D7060D ASL 61)
ACPI: SLIC 3F6D509C, 0024 (r1 DELL M07 27D7060D ASL 61)
ACPI: BOOT 3F6D4BC0, 0028 (r1 DELL M07 27D7060D ASL 61)
ACPI: SSDT 3F6D3A0D, 04DC (r1 PmRef CpuPm 3000 INTL 20050624)
ACPI: Local APIC address 0xfee00000
126MB HIGHMEM available.
887MB LOWMEM available.
mapped low ram: 0 - 377fe000
low ram: 00000000 - 377fe000
bootmap 00009000 - 0000ff00
(9 early reservations) ==> bootmem [0000000000 - 00377fe000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 -
0000001000]
#1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 -
0000002000]
#2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 -
0000007000]
#3 [0000100000 - 000055ae30] TEXT DATA BSS ==> [0000100000 -
000055ae30]
#4 [000055b000 - 000055e000] INIT_PG_TABLE ==> [000055b000 -
000055e000]
#5 [000009f000 - 0000100000] BIOS reserved ==> [000009f000 -
0000100000]
#6 [0000007000 - 0000009000] PGTABLE ==> [0000007000 -
0000009000]
#7 [000055e000 - 0000991ac2] NEW RAMDISK ==> [000055e000 -
0000991ac2]
#8 [0000009000 - 0000010000] BOOTMAP ==> [0000009000 -
0000010000]
Reserving 64MB of memory at 16MB for crashkernel (System RAM: 1014MB)
Zone PFN ranges:
DMA 0x00000000 -> 0x00001000
Normal 0x00001000 -> 0x000377fe
HighMem 0x000377fe -> 0x0003f6d3
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
0: 0x00000000 -> 0x0000009f
0: 0x00000100 -> 0x0003f6d3
On node 0 totalpages: 259698
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 3967 pages, LIFO batch:0
Normal zone: 1744 pages used for memmap
Normal zone: 221486 pages, LIFO batch:31
HighMem zone: 254 pages used for memmap
HighMem zone: 32215 pages, LIFO batch:7
Movable zone: 0 pages used for memmap
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode: Flat. Using 1 I/O APICs
ACPI: HPET id: 0x8086a201 base: 0xfed00000
SMP: Allowing 2 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 0000000000100000
Allocating PCI resources starting at 50000000 (gap: 40000000:b0000000)
PERCPU: Allocating 36864 bytes of per cpu data
NR_CPUS: 4, nr_cpu_ids: 2, nr_node_ids 1
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 257668
Kernel command line: root=UUID=5e751884-8e64-408f-ba3c-621be1d61cc6 ro
splash rootflags=data=writeback crashkernel=384M-2G:64M@16M,2G-:128M@16M
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
Preemptible RCU implementation.
CPU 0 irqstacks, hard=c04f6000 soft=c04f2000
PID hash table entries: 4096 (order: 12, 16384 bytes)
Fast TSC calibration using PIT
Detected 1729.308 MHz processor.
Console: colour VGA+ 80x25
console [tty0] enabled
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 954952k/1039180k available (2649k kernel code, 83552k reserved,
1063k data, 296k init, 129876k highmem)
virtual kernel memory layout:
fixmap : 0xfff85000 - 0xfffff000 ( 488 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
.init : 0xc04a5000 - 0xc04ef000 ( 296 kB)
.data : 0xc0396637 - 0xc04a028c (1063 kB)
.text : 0xc0100000 - 0xc0396637 (2649 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
hpet clockevent registered
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
Calibrating delay loop (skipped), value calculated using timer
frequency.. 3460.72 BogoMIPS (lpj=5764360)
Mount-cache hash table entries: 512
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 1024K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
using mwait in idle threads.
Checking 'hlt' instruction... OK.
ACPI: Core revision 20080926
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Genuine Intel(R) CPU T2080 @ 1.73GHz stepping 0c
CPU 1 irqstacks, hard=c04f7000 soft=c04f3000
Booting processor 1 APIC 0x1 ip 0x6000
Initializing CPU#1
Calibrating delay using timer specific routine.. 3459.13 BogoMIPS
(lpj=5763409)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 1024K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#1.
CPU1: Genuine Intel(R) CPU T2080 @ 1.73GHz stepping 0c
checking TSC synchronization [CPU#0 -> CPU#1]:
Measured 3498706146 cycles TSC warp between CPUs, turning off TSC clock.
Marking TSC unstable due to check_tsc_sync_source failed
Brought up 2 CPUs
Total of 2 processors activated (6919.85 BogoMIPS).
CPU0 attaching sched-domain:
domain 0: span 0-1 level MC
groups: 0 1
CPU1 attaching sched-domain:
domain 0: span 0-1 level MC
groups: 1 0
net_namespace: 540 bytes
regulator: core version 0.5
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 63
PCI: MCFG area at f0000000 reserved in E820
PCI: Using MMCONFIG for extended config space
PCI: Using configuration type 1 for base access
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:02.0: reg 10 32bit mmio: [0xeff00000-0xeff7ffff]
pci 0000:00:02.0: reg 14 io port: [0xeff8-0xefff]
pci 0000:00:02.0: reg 18 32bit mmio: [0xd0000000-0xdfffffff]
pci 0000:00:02.0: reg 1c 32bit mmio: [0xefec0000-0xefefffff]
pci 0000:00:02.1: reg 10 32bit mmio: [0xeff80000-0xefffffff]
pci 0000:00:1b.0: reg 10 64bit mmio: [0xefebc000-0xefebffff]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: PME# disabled
pci 0000:00:1d.0: reg 20 io port: [0xbf80-0xbf9f]
pci 0000:00:1d.1: reg 20 io port: [0xbf60-0xbf7f]
pci 0000:00:1d.2: reg 20 io port: [0xbf40-0xbf5f]
pci 0000:00:1d.3: reg 20 io port: [0xbf20-0xbf3f]
pci 0000:00:1d.7: reg 10 32bit mmio: [0xffa80000-0xffa803ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: region 1080-10bf claimed by ICH6 GPIO
pci 0000:00:1f.2: reg 10 io port: [0x1f0-0x1f7]
pci 0000:00:1f.2: reg 14 io port: [0x3f4-0x3f7]
pci 0000:00:1f.2: reg 18 io port: [0x170-0x177]
pci 0000:00:1f.2: reg 1c io port: [0x374-0x377]
pci 0000:00:1f.2: reg 20 io port: [0xbfa0-0xbfaf]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
pci 0000:00:1f.3: reg 20 io port: [0x10c0-0x10df]
pci 0000:0b:00.0: reg 10 32bit mmio: [0xefdff000-0xefdfffff]
pci 0000:0b:00.0: PME# supported from D0 D3hot D3cold
pci 0000:0b:00.0: PME# disabled
pci 0000:0b:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable
it with 'pcie_aspm=force'
pci 0000:00:1c.0: bridge 32bit mmio: [0xefd00000-0xefdfffff]
pci 0000:00:1c.3: bridge io port: [0xd000-0xdfff]
pci 0000:00:1c.3: bridge 32bit mmio: [0xefa00000-0xefcfffff]
pci 0000:00:1c.3: bridge 64bit mmio pref: [0xe0000000-0xe01fffff]
pci 0000:03:00.0: reg 10 32bit mmio: [0xef9fe000-0xef9fffff]
pci 0000:03:00.0: supports D1 D2
pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:03:00.0: PME# disabled
pci 0000:03:01.0: reg 10 32bit mmio: [0xef9fd800-0xef9fdfff]
pci 0000:03:01.0: supports D1 D2
pci 0000:03:01.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:03:01.0: PME# disabled
pci 0000:03:01.1: reg 10 32bit mmio: [0xef9fd500-0xef9fd5ff]
pci 0000:03:01.1: supports D1 D2
pci 0000:03:01.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:03:01.1: PME# disabled
pci 0000:03:01.2: reg 10 32bit mmio: [0xef9fd600-0xef9fd6ff]
pci 0000:03:01.2: supports D1 D2
pci 0000:03:01.2: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:03:01.2: PME# disabled
pci 0000:03:01.3: reg 10 32bit mmio: [0xef9fd700-0xef9fd7ff]
pci 0000:03:01.3: supports D1 D2
pci 0000:03:01.3: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:03:01.3: PME# disabled
pci 0000:00:1e.0: transparent bridge
pci 0000:00:1e.0: bridge 32bit mmio: [0xef900000-0xef9fffff]
bus 00 -> node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 *11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *4
ACPI: PCI Interrupt Link [LNKC] (IRQs 9 10 *11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 9 10 11) *3
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
SCSI subsystem initialized
libata version 3.00 loaded.
PCI: Using ACPI for IRQ routing
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: Failed calling CRDA
cfg80211: calling CRDA failed - unable to update world regulatory
domain, using static definition
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 64-bit 14.318180 MHz counter
Switched to high resolution mode on CPU 0
Switched to high resolution mode on CPU 1
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:02: io resource (0x1000-0x1005) overlaps 0000:00:1f.0 BAR 7
(0x1000-0x107f), disabling
pnp 00:02: io resource (0x1008-0x100f) overlaps 0000:00:1f.0 BAR 7
(0x1000-0x107f), disabling
pnp 00:03: io resource (0x1006-0x1007) overlaps 0000:00:1f.0 BAR 7
(0x1000-0x107f), disabling
pnp 00:03: io resource (0x100a-0x1059) overlaps 0000:00:1f.0 BAR 7
(0x1000-0x107f), disabling
pnp 00:03: io resource (0x1060-0x107f) overlaps 0000:00:1f.0 BAR 7
(0x1000-0x107f), disabling
pnp 00:03: io resource (0x1010-0x102f) overlaps 0000:00:1f.0 BAR 7
(0x1000-0x107f), disabling
pnp: PnP ACPI: found 12 devices
ACPI: ACPI bus type pnp unregistered
system 00:00: iomem range 0x0-0x9fbff could not be reserved
system 00:00: iomem range 0x9fc00-0x9ffff could not be reserved
system 00:00: iomem range 0xc0000-0xcffff could not be reserved
system 00:00: iomem range 0xe0000-0xfffff could not be reserved
system 00:00: iomem range 0x100000-0x3f6d33ff could not be reserved
system 00:00: iomem range 0x3f6d3400-0x3f6fffff has been reserved
system 00:00: iomem range 0x3f700000-0x3f7fffff has been reserved
system 00:00: iomem range 0x3f700000-0x3fefffff could not be reserved
system 00:00: iomem range 0xffb00000-0xffffffff has been reserved
system 00:00: iomem range 0xfec00000-0xfec0ffff has been reserved
system 00:00: iomem range 0xfee00000-0xfee0ffff has been reserved
system 00:00: iomem range 0xfed20000-0xfed9ffff has been reserved
system 00:00: iomem range 0xffa80000-0xffa83fff could not be reserved
system 00:00: iomem range 0xf4000000-0xf4003fff has been reserved
system 00:00: iomem range 0xf4004000-0xf4004fff has been reserved
system 00:00: iomem range 0xf4005000-0xf4005fff has been reserved
system 00:00: iomem range 0xf4006000-0xf4006fff has been reserved
system 00:00: iomem range 0xf4008000-0xf400bfff has been reserved
system 00:00: iomem range 0xf0000000-0xf3ffffff has been reserved
system 00:02: ioport range 0x4d0-0x4d1 has been reserved
system 00:03: ioport range 0xf400-0xf4fe has been reserved
system 00:03: ioport range 0x1080-0x10bf has been reserved
system 00:03: ioport range 0x10c0-0x10df has been reserved
system 00:03: ioport range 0x809-0x809 has been reserved
system 00:08: ioport range 0xc80-0xcff could not be reserved
system 00:08: ioport range 0x910-0x91f has been reserved
system 00:08: ioport range 0x920-0x92f has been reserved
system 00:08: ioport range 0xcb0-0xcbf has been reserved
system 00:08: ioport range 0x930-0x97f has been reserved
system 00:0b: iomem range 0xfed00000-0xfed003ff has been reserved
pci 0000:00:1c.0: PCI bridge, secondary bus 0000:0b
pci 0000:00:1c.0: IO window: disabled
pci 0000:00:1c.0: MEM window: 0xefd00000-0xefdfffff
pci 0000:00:1c.0: PREFETCH window: disabled
pci 0000:00:1c.3: PCI bridge, secondary bus 0000:0c
pci 0000:00:1c.3: IO window: 0xd000-0xdfff
pci 0000:00:1c.3: MEM window: 0xefa00000-0xefcfffff
pci 0000:00:1c.3: PREFETCH window: 0x000000e0000000-0x000000e01fffff
pci 0000:00:1e.0: PCI bridge, secondary bus 0000:03
pci 0000:00:1e.0: IO window: disabled
pci 0000:00:1e.0: MEM window: 0xef900000-0xef9fffff
pci 0000:00:1e.0: PREFETCH window: disabled
pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
pci 0000:00:1c.3: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
bus: 00 index 0 io port: [0x00-0xffff]
bus: 00 index 1 mmio: [0x000000-0xffffffff]
bus: 0b index 0 mmio: [0x0-0x0]
bus: 0b index 1 mmio: [0xefd00000-0xefdfffff]
bus: 0b index 2 mmio: [0x0-0x0]
bus: 0b index 3 mmio: [0x0-0x0]
bus: 0c index 0 io port: [0xd000-0xdfff]
bus: 0c index 1 mmio: [0xefa00000-0xefcfffff]
bus: 0c index 2 mmio: [0xe0000000-0xe01fffff]
bus: 0c index 3 mmio: [0x0-0x0]
bus: 03 index 0 mmio: [0x0-0x0]
bus: 03 index 1 mmio: [0xef900000-0xef9fffff]
bus: 03 index 2 mmio: [0x0-0x0]
bus: 03 index 3 io port: [0x00-0xffff]
bus: 03 index 4 mmio: [0x000000-0xffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
NET: Registered protocol family 1
Unpacking initramfs... done
Freeing initrd memory: 4302k freed
Simple Boot Flag at 0x79 set to 0x1
highmem bounce pool size: 64 pages
HugeTLB registered 4 MB page size, pre-allocated 0 pages
msgmni has been set to 1620
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler cfq registered (default)
pci 0000:00:02.0: Boot video device
pcieport-driver 0000:00:1c.0: setting latency timer to 64
pcieport-driver 0000:00:1c.0: found MSI capability
pcieport-driver 0000:00:1c.0: irq 383 for MSI/MSI-X
pci_express 0000:00:1c.0:pcie00: allocate port service
pci_express 0000:00:1c.0:pcie02: allocate port service
pci_express 0000:00:1c.0:pcie03: allocate port service
pcieport-driver 0000:00:1c.3: setting latency timer to 64
pcieport-driver 0000:00:1c.3: found MSI capability
pcieport-driver 0000:00:1c.3: irq 382 for MSI/MSI-X
pci_express 0000:00:1c.3:pcie00: allocate port service
pci_express 0000:00:1c.3:pcie02: allocate port service
pci_express 0000:00:1c.3:pcie03: allocate port service
Linux agpgart interface v0.103
[drm] Initialized drm 1.1.0 20060810
b44 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
ssb: Sonics Silicon Backplane found on PCI device 0000:03:00.0
b44.c:v2.0
eth0: Broadcom 44xx/47xx 10/100BaseT Ethernet 00:19:b9:72:d4:1f
console [netcon0] enabled
netconsole: network logging started
Driver 'sd' needs updating - please use bus_type methods
PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
cpuidle: using governor ladder
cpuidle: using governor menu
Advanced Linux Sound Architecture Driver Version 1.0.18rc3.
ALSA device list:
No soundcards found.
TCP cubic registered
NET: Registered protocol family 17
Using IPI No-Shortcut mode
Freeing unused kernel memory: 296k freed
Write protecting the kernel text: 2652k
Write protecting the kernel read-only data: 868k
input: AT Translated Set 2 keyboard as
/devices/platform/i8042/serio0/input/input0
ACPI: SSDT 3F6D4134, 0244 (r1 PmRef Cpu0Ist 3000 INTL 20050624)
ACPI: SSDT 3F6D3EE9, 01C6 (r1 PmRef Cpu0Cst 3001 INTL 20050624)
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
processor ACPI_CPU:00: registered as cooling_device0
ACPI: Processor [CPU0] (supports 8 throttling states)
ACPI: SSDT 3F6D4378, 00C4 (r1 PmRef Cpu1Ist 3000 INTL 20050624)
ACPI: SSDT 3F6D40AF, 0085 (r1 PmRef Cpu1Cst 3000 INTL 20050624)
ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
processor ACPI_CPU:01: registered as cooling_device1
ACPI: Processor [CPU1] (supports 8 throttling states)
thermal LNXTHERM:01: registered as thermal_zone0
ACPI: Thermal Zone [THM] (53 C)
Clocksource tsc unstable (delta = 2023093691 ns)
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
ata_piix 0000:00:1f.2: version 2.12
ata_piix 0000:00:1f.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
ata_piix 0000:00:1f.2: setting latency timer to 64
firewire_ohci 0000:03:01.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
usbcore: registered new device driver usb
scsi0 : ata_piix
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
scsi1 : ata_piix
ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xbfa0 irq 14
ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xbfa8 irq 15
firewire_ohci: Added fw-ohci device 0000:03:01.0, OHCI version 1.10
ata1.00: ATA-7: ST980811AS, 3.CDD, max UDMA/133
ata1.00: 156301488 sectors, multi 8: LBA48 NCQ (depth 0/32)
ata1.00: configured for UDMA/133
ata2.00: ATAPI: TSSTcorpCD-RW/DVD-ROM TSL462D, DE04, max UDMA/33
ata2.00: configured for UDMA/33
scsi 0:0:0:0: Direct-Access ATA ST980811AS 3.CD PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors: (80.0 GB/74.5 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't
support DPO or FUA
sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors: (80.0 GB/74.5 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't
support DPO or FUA
sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
sd 0:0:0:0: [sda] Attached SCSI disk
scsi 1:0:0:0: CD-ROM TSSTcorp CDRW/DVD TSL462D DE04 PQ: 0 ANSI: 5
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1d.7: irq 20, io mem 0xffa80000
sd 0:0:0:0: Attached scsi generic sg0 type 0
scsi 1:0:0:0: Attached scsi generic sg1 type 5
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: irq 20, io base 0x0000bf80
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: irq 21, io base 0x0000bf60
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
Driver 'sr' needs updating - please use bus_type methods
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: irq 22, io base 0x0000bf40
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23
uhci_hcd 0000:00:1d.3: setting latency timer to 64
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.3: irq 23, io base 0x0000bf20
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
firewire_core: created device fw0: GUID 344fc00010d7ad81, S400
PM: Starting manual resume from disk
ReiserFS: sda6: found reiserfs format "3.6" with standard journal
ReiserFS: sda6: using writeback data mode
ReiserFS: sda6: journal params: device sda6, size 8192, journal first
block 18, max trans len 1024, max batch 900, max commit age 30, max
trans age 30
ReiserFS: sda6: checking transaction log (sda6)
ReiserFS: sda6: Using r5 hash to sort names
udevd version 124 started
agpgart-intel 0000:00:00.0: Intel 945GM Chipset
agpgart-intel 0000:00:00.0: detected 7932K stolen memory
agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
ACPI: AC Adapter [AC] (on-line)
ACPI: Battery Slot [BAT0] (battery present)
input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
ACPI: Lid Switch [LID]
input: Power Button (CM) as
/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
ACPI: Power Button (CM) [PBTN]
input: Sleep Button (CM) as
/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3
HDA Intel 0000:00:1b.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
HDA Intel 0000:00:1b.0: setting latency timer to 64
ACPI: Sleep Button (CM) [SBTN]
iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for
Linux, 1.2.26ks
iwl3945: Copyright(c) 2003-2008 Intel Corporation
iwl3945 0000:0b:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
iwl3945 0000:0b:00.0: setting latency timer to 64
iwl3945: Detected Intel Wireless WiFi Link 3945ABG
iwl3945: Tunable channels: 11 802.11bg, 13 802.11a channels
phy0: Selected rate control algorithm 'iwl-3945-rs'
iwl3945 0000:0b:00.0: PCI INT A disabled
Synaptics Touchpad, model: 1, fw: 6.2, id: 0x180b1, caps: 0xa04713/0x200000
input: SynPS/2 Synaptics TouchPad as
/devices/platform/i8042/serio1/input/input4
Adding 1293192k swap on /dev/sda5. Priority:-1 extents:1 across:1293192k
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda3, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
warning: `avahi-daemon' uses 32-bit capabilities (legacy support in use)
pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:02.0: setting latency timer to 64
[drm] Initialized i915 1.6.0 20080730 on minor 0
iwl3945 0000:0b:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
iwl3945 0000:0b:00.0: restoring config space at offset 0x1 (was
0x100102, writing 0x100106)
iwl3945 0000:0b:00.0: irq 381 for MSI/MSI-X
iwl3945 0000:0b:00.0: firmware: requesting iwlwifi-3945-1.ucode
wlan0: direct probe to AP 00:1c:df:67:1f:ac try 1
wlan0 direct probe responded
wlan0: authenticate with AP 00:1c:df:67:1f:ac
wlan0: authenticated
wlan0: associate with AP 00:1c:df:67:1f:ac
wlan0: RX AssocResp from 00:1c:df:67:1f:ac (capab=0x401 status=0 aid=2)
wlan0: associated
wlan0: disassociating by local choice (reason=3)
CE: hpet increasing min_delta_ns to 15000 nsec
CE: hpet increasing min_delta_ns to 22500 nsec
CE: hpet increasing min_delta_ns to 33750 nsec
wlan0: direct probe to AP 00:1c:df:67:1f:ac try 1
wlan0 direct probe responded
wlan0: authenticate with AP 00:1c:df:67:1f:ac
wlan0: authenticated
wlan0: associate with AP 00:1c:df:67:1f:ac
wlan0: RX ReassocResp from 00:1c:df:67:1f:ac (capab=0x401 status=0 aid=2)
wlan0: associated
NET: Registered protocol family 10
ADDRCONF(NETDEV_UP): eth0: link is not ready
wlan0: no IPv6 routers present
CE: hpet increasing min_delta_ns to 50624 nsec
ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
ata2.00: ST_FIRST: !(DRQ|ERR|DF)
ata2.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
cdb 1e 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
res 50/00:01:00:00:00/00:00:00:00:00/a0 Emask 0x2 (HSM violation)
ata2.00: status: { DRDY }
ata2: soft resetting link
ata2.00: configured for UDMA/33
ata2: EH complete
ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
ata2.00: ST_FIRST: !(DRQ|ERR|DF)
ata2.00: cmd a0/00:00:00:08:00/00:00:00:00:00/a0 tag 0 pio 16392 in
cdb 4a 01 00 00 10 00 00 00 08 00 00 00 00 00 00 00
res 50/00:01:00:08:00/00:00:00:00:00/a0 Emask 0x2 (HSM violation)
ata2.00: status: { DRDY }
ata2: soft resetting link
ata2.00: configured for UDMA/33
ata2: EH complete
ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
ata2.00: ST_FIRST: !(DRQ|ERR|DF)
ata2.00: cmd a0/00:00:00:08:00/00:00:00:00:00/a0 tag 0 pio 16392 in
cdb 4a 01 00 00 10 00 00 00 08 00 00 00 00 00 00 00
res 50/00:01:00:08:00/00:00:00:00:00/a0 Emask 0x2 (HSM violation)
ata2.00: status: { DRDY }
ata2: soft resetting link
ata2.00: configured for UDMA/33
ata2: EH complete
Hello,
Justin Madru wrote:
> I've been testing .28 (currently -rc8) and I've noticed in the logs a
> massive amount of the following.
> I can confirm that the messages doesn't appear when booting into a .27
> kernel.
>
> ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
> ata2.00: ST_FIRST: !(DRQ|ERR|DF)
> ata2.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
> cdb 1e 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> res 50/00:01:00:00:00/00:00:00:00:00/a0 Emask 0x2 (HSM violation)
> ata2.00: status: { DRDY }
> ata2: soft resetting link
> ata2.00: configured for UDMA/33
> ata2: EH complete
That's HSM violation on ALLOW_MEDIUM_REMOVAL on the second ATA port.
> I get this block of messages about every 20 seconds for as long as I'm
> booted into a .28 kernel.
> It seems that the sata link is being soft reseted about every _20_ secs.
> My drive is a sata drive that should be using UDMA/133 (right?),
> but the "error" message says configuring for UDMA/33.
> Does this mean that my drive is running at a slower speed?
> Should I be worried about the .28 kernel corrupting my hardware? Is this
> a known issue?
> How can I stop it from filling my logs!
>
> Some information about my computer:
>
> 00:1f.2 IDE interface: Intel Corporation 82801GBM/GHM (ICH7 Family) SATA
> IDE Controller (rev 01)
>
> $ hdparm -I /dev/sda
> /dev/sda:
> ATA device, with non-removable media
> Model Number: ST980811AS
and I strongly doubt it's the hard drive. Can you please post full
kernel log including the boot messages?
Thanks.
--
tejun
Tejun Heo wrote:
> Hello,
>
> Justin Madru wrote:
>
>> I've been testing .28 (currently -rc8) and I've noticed in the logs a
>> massive amount of the following.
>> I can confirm that the messages doesn't appear when booting into a .27
>> kernel.
>>
>> ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
>> ata2.00: ST_FIRST: !(DRQ|ERR|DF)
>> ata2.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
>> cdb 1e 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> res 50/00:01:00:00:00/00:00:00:00:00/a0 Emask 0x2 (HSM violation)
>> ata2.00: status: { DRDY }
>> ata2: soft resetting link
>> ata2.00: configured for UDMA/33
>> ata2: EH complete
>>
>
> That's HSM violation on ALLOW_MEDIUM_REMOVAL on the second ATA port.
>
>
>> I get this block of messages about every 20 seconds for as long as I'm
>> booted into a .28 kernel.
>> It seems that the sata link is being soft reseted about every _20_ secs.
>> My drive is a sata drive that should be using UDMA/133 (right?),
>> but the "error" message says configuring for UDMA/33.
>> Does this mean that my drive is running at a slower speed?
>> Should I be worried about the .28 kernel corrupting my hardware? Is this
>> a known issue?
>> How can I stop it from filling my logs!
>>
>> Some information about my computer:
>>
>> 00:1f.2 IDE interface: Intel Corporation 82801GBM/GHM (ICH7 Family) SATA
>> IDE Controller (rev 01)
>>
>> $ hdparm -I /dev/sda
>> /dev/sda:
>> ATA device, with non-removable media
>> Model Number: ST980811AS
>>
>
> and I strongly doubt it's the hard drive. Can you please post full
> kernel log including the boot messages?
>
> Thanks.
>
>
Well, it's good to hear that you don't think my drive is failing (sure
hope it's not failing!)
I posted the full dmesg in reply to Alan in
http://lkml.org/lkml/2008/12/19/30.
Also, more information about my computer can be found at:
http://jdserver.homelinux.org/bugreports/
If you need me to run anything else not found in the above links then
let me know.
Justin Madru
Hello,
(cc'ing Mark)
Justin Madru wrote:
> Well, it's good to hear that you don't think my drive is failing (sure
> hope it's not failing!)
Yeap, it's your DVD drive.
> I posted the full dmesg in reply to Alan in
> http://lkml.org/lkml/2008/12/19/30.
Ah.. oops, missed the other messages. Sorry.
> Also, more information about my computer can be found at:
> http://jdserver.homelinux.org/bugreports/
> If you need me to run anything else not found in the above links then
> let me know.
Ah.. strange. The command protocol is ATAPI_PROT_NODATA and the drive
should be setting DRQ to receive CDB but it's not doing that.
Strange. It could be that the drive is a little bit tardy with DRQ -
ie. setting DRQ after clearing BUSY and ata_piix is now successfully
hitting the small window for some reason.
Does the attached patch make any difference?
Thanks.
--
tejun
Tejun Heo wrote:
> Hello,
>
> (cc'ing Mark)
>
> Justin Madru wrote:
>
>> Well, it's good to hear that you don't think my drive is failing (sure
>> hope it's not failing!)
>>
>
> Yeap, it's your DVD drive.
>
>
>> I posted the full dmesg in reply to Alan in
>> http://lkml.org/lkml/2008/12/19/30.
>>
>
> Ah.. oops, missed the other messages. Sorry.
>
>
>> Also, more information about my computer can be found at:
>> http://jdserver.homelinux.org/bugreports/
>> If you need me to run anything else not found in the above links then
>> let me know.
>>
>
> Ah.. strange. The command protocol is ATAPI_PROT_NODATA and the drive
> should be setting DRQ to receive CDB but it's not doing that.
> Strange. It could be that the drive is a little bit tardy with DRQ -
> ie. setting DRQ after clearing BUSY and ata_piix is now successfully
> hitting the small window for some reason.
>
> Does the attached patch make any difference?
>
> Thanks.
>
>
Ok, I applied your patch. Unfortunately, it didn't fix my problem.
I now get a different, but similar message; not sure if it happens less
frequently - still often though.
What changes happened between .27 and .28 could've caused this?
Anyways, below is what I get now (with your patch), including the
frequency of occurrence.
Dec 22 11:40:28 : ata2: XXX DRQ set after 100 tries
Dec 22 11:40:28 : ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action
0x6 frozen
Dec 22 11:40:28 : ata2.00: ST_FIRST: !(DRQ|ERR|DF)
Dec 22 11:40:28 : ata2.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
Dec 22 11:40:28 : cdb 1e 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00
Dec 22 11:40:28 : res 50/00:01:00:00:00/00:00:00:00:00/a0 Emask
0x2 (HSM violation)
Dec 22 11:40:28 : ata2.00: status: { DRDY }
Dec 22 11:40:28 : ata2: soft resetting link
Dec 22 11:40:28 : ata2.00: configured for UDMA/33
Dec 22 11:40:28 : ata2: EH complete
. . . .
Dec 22 12:20:32 : ata2: XXX DRQ set after 100 tries
Dec 22 12:20:32 : ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action
0x6 frozen
Dec 22 12:20:32 : ata2.00: ST_FIRST: !(DRQ|ERR|DF)
Dec 22 12:20:32 : ata2.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
Dec 22 12:20:32 : cdb 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00
Dec 22 12:20:32 : res 50/00:01:00:00:00/00:00:00:00:00/a0 Emask
0x2 (HSM violation)
Dec 22 12:20:32 : ata2.00: status: { DRDY }
Dec 22 12:20:32 : ata2: soft resetting link
Dec 22 12:20:32 : ata2.00: configured for UDMA/33
Dec 22 12:20:32 : ata2: EH complete
. . . .
Dec 22 12:27:28 : ata2: XXX DRQ set after 100 tries
Dec 22 12:27:28 : ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action
0x6 frozen
Dec 22 12:27:28 : ata2.00: ST_FIRST: !(DRQ|ERR|DF)
Dec 22 12:27:28 : ata2.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
Dec 22 12:27:28 : cdb 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00
Dec 22 12:27:28 : res 50/00:01:00:00:00/00:00:00:00:00/a0 Emask
0x2 (HSM violation)
Dec 22 12:27:28 : ata2.00: status: { DRDY }
Dec 22 12:27:28 : ata2: soft resetting link
Dec 22 12:27:28 : ata2.00: configured for UDMA/33
Dec 22 12:27:28 : ata2: EH complete
. . . .
Dec 22 12:38:16 : ata2: XXX DRQ set after 100 tries
Dec 22 12:38:16 : ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action
0x6 frozen
Dec 22 12:38:16 : ata2.00: ST_FIRST: !(DRQ|ERR|DF)
Dec 22 12:38:16 : ata2.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
Dec 22 12:38:16 : cdb 1e 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00
Dec 22 12:38:16 : res 50/00:01:00:00:00/00:00:00:00:00/a0 Emask
0x2 (HSM violation)
Dec 22 12:38:16 : ata2.00: status: { DRDY }
Dec 22 12:38:16 : ata2: soft resetting link
Dec 22 12:38:16 : ata2.00: configured for UDMA/33
Dec 22 12:38:16 : ata2: EH complete
. . . .
Dec 22 12:47:06 : ata2: XXX DRQ set after 100 tries
Dec 22 12:47:06 : ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action
0x6 frozen
Dec 22 12:47:06 : ata2.00: ST_FIRST: !(DRQ|ERR|DF)
Dec 22 12:47:06 : ata2.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
Dec 22 12:47:06 : cdb 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00
Dec 22 12:47:06 : res 50/00:01:00:00:00/00:00:00:00:00/a0 Emask
0x2 (HSM violation)
Dec 22 12:47:06 : ata2.00: status: { DRDY }
Dec 22 12:47:06 : ata2: soft resetting link
Dec 22 12:47:06 : ata2.00: configured for UDMA/33
Dec 22 12:47:06 : ata2: EH complete
. . . .
Dec 22 12:49:26 : ata2: XXX DRQ set after 100 tries
Dec 22 12:49:26 : ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action
0x6 frozen
Dec 22 12:49:26 : ata2.00: ST_FIRST: !(DRQ|ERR|DF)
Dec 22 12:49:26 : ata2.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
Dec 22 12:49:26 : cdb 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00
Dec 22 12:49:26 : res 50/00:01:00:00:00/00:00:00:00:00/a0 Emask
0x2 (HSM violation)
Dec 22 12:49:26 : ata2.00: status: { DRDY }
Dec 22 12:49:26 : ata2: soft resetting link
Dec 22 12:49:26 : ata2.00: configured for UDMA/33
Dec 22 12:49:26 : ata2: EH complete
. . . .
Dec 22 13:01:04 : ata2: XXX DRQ set after 100 tries
Dec 22 13:01:04 : ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action
0x6 frozen
Dec 22 13:01:04 : ata2.00: ST_FIRST: !(DRQ|ERR|DF)
Dec 22 13:01:04 : ata2.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
Dec 22 13:01:04 : cdb 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00
Dec 22 13:01:04 : res 50/00:01:00:00:00/00:00:00:00:00/a0 Emask
0x2 (HSM violation)
Dec 22 13:01:04 : ata2.00: status: { DRDY }
Dec 22 13:01:04 : ata2: soft resetting link
Dec 22 13:01:04 : ata2.00: configured for UDMA/33
Dec 22 13:01:04 : ata2: EH complete
. . . .
Dec 22 13:02:18 : ata2: XXX DRQ set after 100 tries
Dec 22 13:02:18 : ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action
0x6 frozen
Dec 22 13:02:18 : ata2.00: ST_FIRST: !(DRQ|ERR|DF)
Dec 22 13:02:18 : ata2.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
Dec 22 13:02:18 : cdb 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00
Dec 22 13:02:18 : res 50/00:01:00:00:00/00:00:00:00:00/a0 Emask
0x2 (HSM violation)
Dec 22 13:02:18 : ata2.00: status: { DRDY }
Dec 22 13:02:18 : ata2: soft resetting link
Dec 22 13:02:18 : ata2.00: configured for UDMA/33
Dec 22 13:02:18 : ata2: EH complete
. . . .
Dec 22 13:03:30 : ata2: XXX DRQ set after 100 tries
Dec 22 13:03:30 : ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action
0x6 frozen
Dec 22 13:03:30 : ata2.00: ST_FIRST: !(DRQ|ERR|DF)
Dec 22 13:03:30 : ata2.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
Dec 22 13:03:30 : cdb 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00
Dec 22 13:03:30 : res 50/00:01:00:00:00/00:00:00:00:00/a0 Emask
0x2 (HSM violation)
Dec 22 13:03:30 : ata2.00: status: { DRDY }
Dec 22 13:03:30 : ata2: soft resetting link
Dec 22 13:03:30 : ata2.00: configured for UDMA/33
Dec 22 13:03:30 : ata2: EH complete
. . . .
Dec 22 13:04:26 : ata2: XXX DRQ set after 100 tries
Dec 22 13:04:26 : ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action
0x6 frozen
Dec 22 13:04:26 : ata2.00: ST_FIRST: !(DRQ|ERR|DF)
Dec 22 13:04:26 : ata2.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
Dec 22 13:04:26 : cdb 1e 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00
Dec 22 13:04:26 : res 50/00:01:00:00:00/00:00:00:00:00/a0 Emask
0x2 (HSM violation)
Dec 22 13:04:26 : ata2.00: status: { DRDY }
Dec 22 13:04:26 : ata2: soft resetting link
Dec 22 13:04:26 : ata2.00: configured for UDMA/33
Dec 22 13:04:26 : ata2: EH complete
. . . .
Dec 22 13:11:58 : ata2: XXX DRQ set after 100 tries
Dec 22 13:11:58 : ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action
0x6 frozen
Dec 22 13:11:58 : ata2.00: ST_FIRST: !(DRQ|ERR|DF)
Dec 22 13:11:58 : ata2.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
Dec 22 13:11:58 : cdb 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00
Dec 22 13:11:58 : res 50/00:01:00:00:00/00:00:00:00:00/a0 Emask
0x2 (HSM violation)
Dec 22 13:11:58 : ata2.00: status: { DRDY }
Dec 22 13:11:58 : ata2: soft resetting link
Dec 22 13:11:58 : ata2.00: configured for UDMA/33
Dec 22 13:11:58 : ata2: EH complete
Hello,
Justin Madru wrote:
>> Ah.. strange. The command protocol is ATAPI_PROT_NODATA and the drive
>> should be setting DRQ to receive CDB but it's not doing that.
>> Strange. It could be that the drive is a little bit tardy with DRQ -
>> ie. setting DRQ after clearing BUSY and ata_piix is now successfully
>> hitting the small window for some reason.
>>
>> Does the attached patch make any difference?
>>
>> Thanks.
>>
>>
> Ok, I applied your patch. Unfortunately, it didn't fix my problem.
> I now get a different, but similar message; not sure if it happens less
> frequently - still often though.
Aiee...
> What changes happened between .27 and .28 could've caused this?
> Anyways, below is what I get now (with your patch), including the
> frequency of occurrence.
I have no idea and I'm afraid we'll need a bisection here. :-( Can you
please try the attached patch?
Thanks.
--
tejun
Tejun Heo wrote:
>> What changes happened between .27 and .28 could've caused this?
>> Anyways, below is what I get now (with your patch), including the
>> frequency of occurrence.
>>
>
> I have no idea and I'm afraid we'll need a bisection here. :-( Can you
> please try the attached patch?
>
> Thanks.
>
>
I applied the patch and get the following:
ata2: XXX status=50 after 100 tries
ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
ata2.00: ST_FIRST: !(DRQ|ERR|DF)
ata2.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
cdb 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
res 50/00:01:00:00:00/00:00:00:00:00/a0 Emask 0x2 (HSM violation)
ata2.00: status: { DRDY }
ata2: soft resetting link
ata2.00: configured for UDMA/33
ata2: EH complete
I tried to git bisect the problem. First time I thought the error was
between rc2 and rc3,
but the bisect gave inconclusive results because I couldn't tell for
sure a good commit from a bad.
I tried again with .27 to .28-rc3, but I was unable to bisect because of
compile errors (in pre-rc1),
and doing git bisect skip, again landed on a commit with compile errors.
Unless you can think of anything else, I'm just going to wait and see if
a commit in .29 will fix the problem.
Justin Madru
Hello,
Justin Madru wrote:
> I applied the patch and get the following:
>
> ata2: XXX status=50 after 100 tries
> ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
> ata2.00: ST_FIRST: !(DRQ|ERR|DF)
> ata2.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
> cdb 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> res 50/00:01:00:00:00/00:00:00:00:00/a0 Emask 0x2 (HSM violation)
> ata2.00: status: { DRDY }
> ata2: soft resetting link
> ata2.00: configured for UDMA/33
> ata2: EH complete
This is so strange. :-(
> I tried to git bisect the problem. First time I thought the error
> was between rc2 and rc3, but the bisect gave inconclusive results
> because I couldn't tell for sure a good commit from a bad. I tried
> again with .27 to .28-rc3, but I was unable to bisect because of
> compile errors (in pre-rc1), and doing git bisect skip, again landed
> on a commit with compile errors.
Thanks for trying. I can't think of any relevant change which can
cause this and I doubt it's something affecting many machines given
that you're currently the only one reporting this problem.
Any chance it's a hardware fluke? Can you please make sure it doesn't
happen with 2.6.27?
> Unless you can think of anything else, I'm just going to wait and see if
> a commit in .29 will fix the problem.
Eh... I doubt that will happen. No scheduled change for SFF HSM
implementation.
Thanks.
--
tejun
(cc linux-ide).
This is a post-2.6.27 regression. Panic!
On Fri, 12 Dec 2008 18:07:49 -0800 Justin Madru <[email protected]> wrote:
> I've been testing .28 (currently -rc8) and I've noticed in the logs a
> massive amount of the following.
> I can confirm that the messages doesn't appear when booting into a .27
> kernel.
>
> ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
> ata2.00: ST_FIRST: !(DRQ|ERR|DF)
> ata2.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
> cdb 1e 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> res 50/00:01:00:00:00/00:00:00:00:00/a0 Emask 0x2 (HSM violation)
> ata2.00: status: { DRDY }
> ata2: soft resetting link
> ata2.00: configured for UDMA/33
> ata2: EH complete
>
> I get this block of messages about every 20 seconds for as long as I'm
> booted into a .28 kernel.
> It seems that the sata link is being soft reseted about every _20_ secs.
> My drive is a sata drive that should be using UDMA/133 (right?),
> but the "error" message says configuring for UDMA/33.
> Does this mean that my drive is running at a slower speed?
> Should I be worried about the .28 kernel corrupting my hardware? Is this
> a known issue?
> How can I stop it from filling my logs!
>
> Some information about my computer:
>
> $ lspci
> 00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML
> and 945GT Express Memory Controller Hub (rev 03)
> 00:02.0 VGA compatible controller: Intel Corporation Mobile 945GM/GMS,
> 943/940GML Express Integrated Graphics Controller (rev 03)
> 00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/GME,
> 943/940GML Express Integrated Graphics Controller (rev 03)
> 00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High
> Definition Audio Controller (rev 01)
> 00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express
> Port 1 (rev 01)
> 00:1c.3 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express
> Port 4 (rev 01)
> 00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI
> Controller #1 (rev 01)
> 00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI
> Controller #2 (rev 01)
> 00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI
> Controller #3 (rev 01)
> 00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI
> Controller #4 (rev 01)
> 00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI
> Controller (rev 01)
> 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e1)
> 00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface
> Bridge (rev 01)
> 00:1f.2 IDE interface: Intel Corporation 82801GBM/GHM (ICH7 Family) SATA
> IDE Controller (rev 01)
> 00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller
> (rev 01)
> 03:00.0 Ethernet controller: Broadcom Corporation BCM4401-B0 100Base-TX
> (rev 02)
> 03:01.0 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller
> 03:01.1 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro
> Host Adapter (rev 19)
> 03:01.2 System peripheral: Ricoh Co Ltd R5C843 MMC Host Controller (rev 0a)
> 03:01.3 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host
> Adapter (rev 05)
> 03:01.4 System peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev ff)
> 0b:00.0 Network controller: Intel Corporation PRO/Wireless 3945ABG
> [Golan] Network Connection (rev 02)
>
> $ hdparm -I /dev/sda
> /dev/sda:
> ATA device, with non-removable media
> Model Number: ST980811AS
> Serial Number: 5LY6J1M0
> Firmware Revision: 3.CDD
> Standards:
> Supported: 7 6 5 4
> Likely used: 8
> Configuration:
> Logical max current
> cylinders 16383 16383
> heads 16 16
> sectors/track 63 63
> --
> CHS current addressable sectors: 16514064
> LBA user addressable sectors: 156301488
> LBA48 user addressable sectors: 156301488
> device size with M = 1024*1024: 76319 MBytes
> device size with M = 1000*1000: 80026 MBytes (80 GB)
> Capabilities:
> LBA, IORDY(can be disabled)
> Queue depth: 32
> Standby timer values: spec'd by Standard, no device specific minimum
> R/W multiple sector transfer: Max = 16 Current = 8
> Advanced power management level: 128
> Recommended acoustic management value: 128, current value: 0
> DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 udma5 *udma6
> Cycle time: min=120ns recommended=120ns
> PIO: pio0 pio1 pio2 pio3 pio4
> Cycle time: no flow control=240ns IORDY flow control=120ns
> Commands/features:
> Enabled Supported:
> * SMART feature set
> Security Mode feature set
> * Power Management feature set
> * Write cache
> * Look-ahead
> * Host Protected Area feature set
> * WRITE_BUFFER command
> * READ_BUFFER command
> * DOWNLOAD_MICROCODE
> * Advanced Power Management feature set
> SET_MAX security extension
> Automatic Acoustic Management feature set
> * 48-bit Address feature set
> * Mandatory FLUSH_CACHE
> * FLUSH_CACHE_EXT
> * SMART error logging
> * SMART self-test
> * IDLE_IMMEDIATE with UNLOAD
> * SATA-I signaling speed (1.5Gb/s)
> * Native Command Queueing (NCQ)
> * Phy event counters
> Device-initiated interface power management
> * Software settings preservation
> * SMART Command Transport (SCT) feature set
> Security:
> Master password revision code = 65534
> supported
> not enabled
> not locked
> frozen
> not expired: security count
> not supported: enhanced erase
> Checksum: correct
>
> $ hdparm -fF /dev/sda; hdparm -tT /dev/sda
> /dev/sda:
> Timing cached reads: 1650 MB in 2.00 seconds = 825.06 MB/sec
> Timing buffered disk reads: 130 MB in 3.04 seconds = 42.79 MB/sec
>
> $ smartctl -a /dev/sda
> smartctl version 5.38 [i686-pc-linux-gnu] Copyright (C) 2002-8 Bruce Allen
> Home page is http://smartmontools.sourceforge.net/
>
> === START OF INFORMATION SECTION ===
> Model Family: Seagate Momentus 5400.3
> Device Model: ST980811AS
> Serial Number: 5LY6J1M0
> Firmware Version: 3.CDD
> User Capacity: 80,026,361,856 bytes
> Device is: In smartctl database [for details use: -P show]
> ATA Version is: 7
> ATA Standard is: Exact ATA specification draft version not indicated
> Local Time is: Fri Dec 12 17:05:06 2008 PST
> SMART support is: Available - device has SMART capability.
> SMART support is: Enabled
>
> === START OF READ SMART DATA SECTION ===
> SMART overall-health self-assessment test result: PASSED
> See vendor-specific Attribute list for marginal Attributes.
>
> General SMART Values:
> Offline data collection status: (0x82) Offline data collection activity
> was completed without error.
> Auto Offline Data Collection:
> Enabled.
> Self-test execution status: ( 0) The previous self-test routine
> completed
> without error or no self-test
> has ever
> been run.
> Total time to complete Offline
> data collection: ( 426) seconds.
> Offline data collection
> capabilities: (0x5b) SMART execute Offline immediate.
> Auto Offline data collection
> on/off support.
> Suspend Offline collection upon new
> command.
> Offline surface scan supported.
> Self-test supported.
> No Conveyance Self-test supported.
> Selective Self-test supported.
> SMART capabilities: (0x0003) Saves SMART data before entering
> power-saving mode.
> Supports SMART auto save timer.
> Error logging capability: (0x01) Error logging supported.
> No General Purpose Logging support.
> Short self-test routine
> recommended polling time: ( 2) minutes.
> Extended self-test routine
> recommended polling time: ( 84) minutes.
> SCT capabilities: (0x0001) SCT Status supported.
>
> SMART Attributes Data Structure revision number: 10
> Vendor Specific SMART Attributes with Thresholds:
> ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE
> UPDATED WHEN_FAILED RAW_VALUE
> 1 Raw_Read_Error_Rate 0x000f 100 253 006 Pre-fail
> Always - 0
> 3 Spin_Up_Time 0x0003 099 099 085 Pre-fail
> Always - 0
> 4 Start_Stop_Count 0x0032 099 099 020 Old_age
> Always - 1142
> 5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail
> Always - 0
> 7 Seek_Error_Rate 0x000f 079 060 030 Pre-fail
> Always - 88807308
> 9 Power_On_Hours 0x0032 097 097 000 Old_age
> Always - 3420
> 10 Spin_Retry_Count 0x0013 100 100 034 Pre-fail
> Always - 0
> 12 Power_Cycle_Count 0x0032 099 099 020 Old_age
> Always - 1180
> 187 Reported_Uncorrect 0x0032 100 100 000 Old_age
> Always - 0
> 189 High_Fly_Writes 0x003a 100 100 000 Old_age
> Always - 0
> 190 Airflow_Temperature_Cel 0x0022 050 042 045 Old_age
> Always In_the_past 50 (0 102 52 25)
> 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age
> Always - 1076
> 193 Load_Cycle_Count 0x0032 001 001 000 Old_age
> Always - 241664
> 194 Temperature_Celsius 0x0022 050 058 000 Old_age
> Always - 50 (0 19 0 0)
> 195 Hardware_ECC_Recovered 0x001a 061 060 000 Old_age
> Always - 195105625
> 197 Current_Pending_Sector 0x0012 100 100 000 Old_age
> Always - 0
> 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age
> Offline - 0
> 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age
> Always - 0
> 200 Multi_Zone_Error_Rate 0x0000 100 253 000 Old_age
> Offline - 0
> 202 TA_Increase_Count 0x0032 100 253 000 Old_age
> Always - 0
>
> SMART Error Log Version: 1
> No Errors Logged
>
> SMART Self-test log structure revision number 1
> Num Test_Description Status Remaining
> LifeTime(hours) LBA_of_first_error
> # 1 Extended offline Completed without error 00%
> 3257 -
> # 2 Short offline Completed without error 00%
> 3256 -
> # 3 Short offline Completed without error 00%
> 2659 -
> # 4 Short offline Completed without error 00%
> 2659 -
> # 5 Short offline Completed without error 00%
> 1657 -
> # 6 Short offline Completed without error 00%
> 1621 -
> # 7 Short offline Completed without error 00%
> 2 -
> # 8 Short offline Completed without error 00%
> 2 -
> # 9 Short offline Completed without error 00%
> 1 -
> #10 Short offline Completed without error 00%
> 0 -
>
> SMART Selective self-test log data structure revision number 1
> SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
> 1 0 0 Not_testing
> 2 0 0 Not_testing
> 3 0 0 Not_testing
> 4 0 0 Not_testing
> 5 0 0 Not_testing
> Selective self-test flags (0x0):
> After scanning selected spans, do NOT read-scan remainder of disk.
> If Selective self-test is pending on power-up, resume after 0 minute delay.
>
Andrew Morton wrote:
> (cc linux-ide).
>
> This is a post-2.6.27 regression. Panic!
>
> On Fri, 12 Dec 2008 18:07:49 -0800 Justin Madru <[email protected]> wrote:
>
>> I've been testing .28 (currently -rc8) and I've noticed in the logs a
>> massive amount of the following.
>> I can confirm that the messages doesn't appear when booting into a .27
>> kernel.
>>
>> ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
>> ata2.00: ST_FIRST: !(DRQ|ERR|DF)
>> ata2.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
>> cdb 1e 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> res 50/00:01:00:00:00/00:00:00:00:00/a0 Emask 0x2 (HSM violation)
>> ata2.00: status: { DRDY }
>> ata2: soft resetting link
>> ata2.00: configured for UDMA/33
>> ata2: EH complete
>>
>> I get this block of messages about every 20 seconds for as long as I'm
>> booted into a .28 kernel.
>> It seems that the sata link is being soft reseted about every _20_ secs.
>> My drive is a sata drive that should be using UDMA/133 (right?),
>> but the "error" message says configuring for UDMA/33.
>> Does this mean that my drive is running at a slower speed?
>> Should I be worried about the .28 kernel corrupting my hardware? Is this
>> a known issue?
>> How can I stop it from filling my logs!
>>
>> Some information about my computer:
>>
>> $ lspci
>> 00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML
>> and 945GT Express Memory Controller Hub (rev 03)
>> 00:02.0 VGA compatible controller: Intel Corporation Mobile 945GM/GMS,
>> 943/940GML Express Integrated Graphics Controller (rev 03)
>> 00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/GME,
>> 943/940GML Express Integrated Graphics Controller (rev 03)
>> 00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High
>> Definition Audio Controller (rev 01)
>> 00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express
>> Port 1 (rev 01)
>> 00:1c.3 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express
>> Port 4 (rev 01)
>> 00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI
>> Controller #1 (rev 01)
>> 00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI
>> Controller #2 (rev 01)
>> 00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI
>> Controller #3 (rev 01)
>> 00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI
>> Controller #4 (rev 01)
>> 00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI
>> Controller (rev 01)
>> 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e1)
>> 00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface
>> Bridge (rev 01)
>> 00:1f.2 IDE interface: Intel Corporation 82801GBM/GHM (ICH7 Family) SATA
>> IDE Controller (rev 01)
>> 00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller
>> (rev 01)
>> 03:00.0 Ethernet controller: Broadcom Corporation BCM4401-B0 100Base-TX
>> (rev 02)
What driver in use? ata_piix? Can you give full dmesg (boot + first
few errors)?
Are there any ATAPI devices attached to this controller, in addition to
the Seagate ST980811AS ?
Jeff
On Tue, 16 Dec 2008 21:02:51 -0800
Andrew Morton <[email protected]> wrote:
>
> (cc linux-ide).
>
> This is a post-2.6.27 regression. Panic!
>
> On Fri, 12 Dec 2008 18:07:49 -0800 Justin Madru <[email protected]> wrote:
>
> > I've been testing .28 (currently -rc8) and I've noticed in the logs a
> > massive amount of the following.
> > I can confirm that the messages doesn't appear when booting into a .27
> > kernel.
> >
> > ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
> > ata2.00: ST_FIRST: !(DRQ|ERR|DF)
Which is the first 2.6.28-rc that this appears ?